EN
Lexmark logo
Official user manual

Lexmark MS818

362 pages·17.8 MB·Printer·PDF·ENDEFRITNLJA
Lexmark MS818
Table of Contents 540 sections Contents · Safety information · Conventions · Overview · … ShowHide
Contentsp.2Safety informationp.5Conventionsp.5Overviewp.8Using this guidep.8Finding information about the printerp.8Selecting a location for the printerp.10Additional printer setupp.12Installing internal optionsp.12Available internal optionsp.12Accessing the controller boardp.12Installing a memory cardp.16Installing an Internal Solutions Portp.17Installing an optional cardp.22Installing a printer hard diskp.23Removing a printer hard diskp.27Installing hardware optionsp.29Order of installationp.29Installing optional traysp.30Attaching cablesp.33Setting up the printer softwarep.35Installing the printer softwarep.35Adding available options in the print driverp.35Networkingp.36Preparing to set up the printer on an Ethernet networkp.36Preparing to set up the printer on a wireless networkp.36Connecting the printer to a network using the Wireless Setup Wizardp.37Connecting the printer to a wireless network using the Wi-Fi Protected Setupp.38Connecting the printer to a wireless network using the Embedded Web Serverp.39Setting up serial printing (Windows only)p.40Verifying printer setupp.40Using MS810n, MS810dn, MS811n, MS811dn, MS812dn, MS817n, MS817dn, MS818dnp.41Learning about the printerp.41Printer configurationsp.41Using the printer control panelp.43Understanding the colors of the Sleep button and indicator lightsp.44Loading paper and specialty mediap.44Setting the paper size and typep.44Configuring Universal paper settingsp.44Loading the 250or 550-sheet trayp.45Loading the 2100-sheet trayp.52Loading the multipurpose feederp.59Linking and unlinking traysp.64Linking and unlinking traysp.64Creating a custom name for a paper typep.64Assigning a custom paper typep.65Printingp.66Printing a documentp.66Printing from a computerp.66Adjusting toner darknessp.66Printing from a flash drivep.67Printing from a flash drivep.67Supported flash drives and file typesp.68Printing from a mobile devicep.69Printing from a mobile device using Mopria Print Servicep.69Printing from a mobile device using Google Cloud Printp.69Printing from a mobile device using AirPrintp.69Printing from a mobile device using Lexmark Mobile Printp.70Printing confidential and other held jobsp.70Storing print jobs in the printerp.70Printing held jobsp.71Printing information pagesp.71Printing a font sample listp.71Printing a directory listp.71Canceling a print jobp.71Canceling a print job from the printer control panelp.71Canceling a print job from the computerp.72Managing your printerp.72Finding advanced networking and administrator informationp.72Accessing the remote control panelp.72Configuring supply notifications from the Embedded Web Serverp.72Modifying confidential print settingsp.73Copying printer settings to other printersp.74Printing a menu settings pagep.74Printing a network setup pagep.75Checking the status of parts and suppliesp.75Checking the status of parts and supplies on the printer control panelp.75Checking the status of parts and supplies from the Embedded Web Serverp.75Saving energyp.75Using Eco-Modep.75Reducing printer noisep.76Adjusting Sleep modep.77Using Hibernate modep.77Restoring factory default settingsp.78Securing the printerp.78Using the security lock featurep.78Statement of Volatilityp.78Erasing volatile memoryp.79Erasing non-volatile memoryp.80Erasing printer hard disk memoryp.80Configuring printer hard disk encryptionp.81Finding printer security informationp.82Using MS810dep.83Learning about the printerp.83Printer configurationsp.83Using the printer control panelp.85Understanding the colors of the Sleep button and indicator lightsp.86Understanding the home screenp.86Using the touch-screen buttonsp.88Setting up and using the home screen applicationsp.89Finding the IP address of the computerp.89Finding the IP address of the printerp.89Accessing the Embedded Web Serverp.89Customizing the home screenp.90Activating the home screen applicationsp.90Finding information about the home screen applicationsp.90Using Background and Idle Screenp.90Setting up Forms and Favoritesp.91Understanding Eco-Settingsp.91Exporting and importing a configurationp.92Setting up Remote Operator Panelp.92Loading paper and specialty mediap.93Setting the paper size and typep.93Configuring Universal paper settingsp.93Loading the 250or 550-sheet trayp.93Loading the 2100-sheet trayp.100Loading the multipurpose feederp.107Linking and unlinking traysp.112Linking and unlinking traysp.112Creating a custom name for a paper typep.112Assigning a custom paper typep.113Printingp.113Printing a documentp.113Printing from a computerp.113Printing formsp.114Adjusting toner darknessp.114Printing from a flash drivep.115Printing from a flash drivep.115Supported flash drives and file typesp.116Printing from a mobile devicep.117Printing from a mobile device using Mopria Print Servicep.117Printing from a mobile device using Google Cloud Printp.117Printing from a mobile device using AirPrintp.117Printing from a mobile device using Lexmark Printp.117Printing confidential and other held jobsp.118Storing print jobs in the printerp.118Printing held jobsp.118Printing information pagesp.119Printing a font sample listp.119Printing a directory listp.119Canceling a print jobp.119Canceling a print job from the printer control panelp.119Canceling a print job from the computerp.119Managing your printerp.120Finding advanced networking and administrator informationp.120Checking the virtual displayp.120Configuring supply notifications from the Embedded Web Serverp.120Modifying confidential print settingsp.121Copying printer settings to other printersp.121Printing a menu settings pagep.122Printing a network setup pagep.122Checking the status of parts and suppliesp.122Checking the status of parts and supplies on the printer control panelp.122Checking the status of parts and supplies from the Embedded Web Serverp.122Saving energyp.123Using Eco-Modep.123Reducing printer noisep.123Adjusting Sleep modep.124Using Hibernate modep.124Restoring factory default settingsp.124Securing the printerp.125Using the security lock featurep.125Statement of Volatilityp.125Erasing volatile memoryp.126Erasing non-volatile memoryp.127Erasing printer hard disk memoryp.127Configuring printer hard disk encryptionp.128Finding printer security informationp.129Using MS812dep.130Learning about the printerp.130Printer configurationsp.130Using the printer control panelp.132Understanding the colors of the Sleep button and indicator lightsp.133Understanding the home screenp.133Using the touch-screen buttonsp.134Setting up and using the home screen applicationsp.137Finding the IP address of the computerp.137Finding the IP address of the printerp.137Accessing the Embedded Web Serverp.137Customizing the home screenp.138Activating the home screen applicationsp.138Finding information about the home screen applicationsp.138Using Background and Idle Screenp.138Setting up Forms and Favoritesp.139Understanding Eco-Settingsp.139Exporting and importing a configurationp.140Setting up Remote Operator Panelp.140Loading paper and specialty mediap.141Setting the paper size and typep.141Configuring Universal paper settingsp.141Loading the 250or 550-sheet trayp.142Loading the 2100-sheet trayp.149Loading the multipurpose feederp.156Linking and unlinking traysp.161Linking and unlinking traysp.161Creating a custom name for a paper typep.161Assigning a custom paper typep.162Printingp.162Printing a documentp.162Printing from a computerp.162Printing formsp.162Adjusting toner darknessp.163Printing from a flash drivep.163Printing from a flash drivep.163Supported flash drives and file typesp.164Printing from a mobile devicep.165Printing from a mobile device using Mopria Print Servicep.165Printing from a mobile device using Google Cloud Printp.165Printing from a mobile device using AirPrintp.165Printing from a mobile device using Lexmark Printp.166Printing confidential and other held jobsp.166Storing print jobs in the printerp.166Printing held jobsp.167Printing information pagesp.167Printing a font sample listp.167Printing a directory listp.167Canceling a print jobp.168Canceling a print job from the printer control panelp.168Canceling a print job from the computerp.168Managing your printerp.168Finding advanced networking and administrator informationp.168Checking the virtual displayp.168Configuring supply notifications from the Embedded Web Serverp.168Modifying confidential print settingsp.169Copying printer settings to other printersp.170Printing a menu settings pagep.170Printing a network setup pagep.170Checking the status of parts and suppliesp.171Checking the status of parts and supplies on the printer control panelp.171Checking the status of parts and supplies from the Embedded Web Serverp.171Saving energyp.171Using Eco-Modep.171Reducing printer noisep.172Adjusting Sleep modep.173Using Hibernate modep.173Restoring factory default settingsp.173Securing the printerp.174Using the security lock featurep.174Statement of Volatilityp.174Erasing volatile memoryp.175Erasing non-volatile memoryp.175Erasing printer hard disk memoryp.176Configuring printer hard disk encryptionp.176Finding printer security informationp.177Paper and specialty media guidep.178Using specialty mediap.178Tips on using card stockp.178Tips on using envelopesp.178Tips on using labelsp.179Tips on using transparenciesp.179Paper guidelinesp.180Paper characteristicsp.180Selecting paperp.181Selecting preprinted forms and letterheadp.181Using recycled paper and other office papersp.181Storing paperp.182Supported paper sizes, types, and weightsp.183Paper types and weights supported by the printerp.183Paper sizes supported by the printerp.183Paper sizes, types, and weights supported by the output optionsp.185Understanding the printer menusp.189Menus listp.189Paper menup.190Default Source menup.190Paper Size/Type menup.190Configure MP menup.193Substitute Size menup.193Paper Texture menup.194Paper Weight menup.195Paper Loading menup.197Custom Types menup.198Custom Names menup.198Custom Bin Names menup.199Universal Setup menup.199Bin Setup menup.200Reports menup.201Reports menup.201Network/Ports menup.202Active NIC menup.202Standard Network or Network [x] menup.202Reports menup.204Network Card menup.204TCP/IP menup.205IPv6 menup.206Wireless menup.206AppleTalk menup.207Standard USB menup.208Parallel [x] menup.209Serial [x] menup.212SMTP Setup menup.214Security menup.215Edit Security Setups menup.215Miscellaneous Security Settings menup.216Confidential Print menup.217Erase Temporary Data Files menup.217Security Audit Log menup.218Set Date and Time menup.218Settings menup.220General Settings menup.220Flash Drive Menup.229Print Settings menup.229Print Settingsp.231Setup menup.231Finishing menup.233Quality menup.236Job Accounting menup.236Utilities menup.238XPS menup.238PDF menup.239PostScript menup.239PCL Emul menup.239PPDS menup.242HTML menup.244Image menup.245Help menup.245Saving money and the environmentp.247Adjusting the brightness of the printer displayp.247Saving paper and tonerp.247Using recycled paperp.247Conserving suppliesp.248Recyclingp.248Recycling Lexmark productsp.248Recycling Lexmark packagingp.248Returning Lexmark cartridges for reuse or recyclingp.248Maintaining the printerp.250Ordering suppliesp.250Using genuine Lexmark parts and suppliesp.250Estimated number of remaining pagesp.250Ordering toner cartridgesp.250Ordering an imaging unitp.252Ordering staple cartridgesp.252Ordering a roller kitp.252Ordering a maintenance kitp.252Storing suppliesp.253Replacing suppliesp.254Replacing the toner cartridgep.254Replacing the imaging unitp.256Replacing a staple cartridgep.259Cleaning printer partsp.260Cleaning the printerp.260Emptying the hole punch boxp.261Moving the printerp.262Moving the printer to another locationp.262Shipping the printerp.262Clearing jamsp.263Avoiding jamsp.263Identifying jam locationsp.265Paper jam in the front doorp.267Paper jam in the rear doorp.268Paper jam in the standard binp.271Paper jam in the duplex unitp.271Paper jam in traysp.272Paper jam in the multipurpose feederp.273Paper jam in the staple finisherp.274Staple jam in the finisherp.276Paper jam in the output expanderp.279Paper jam in the mailboxp.280Troubleshootingp.282Understanding the printer messagesp.282Cartridge, imaging unit mismatch [41.xy]p.282Change [paper source] to [custom string] load [orientation]p.282Change [paper source] to [custom type name] load [orientation]p.282Change [paper source] to [paper size] load [orientation]p.282Change [paper source] to [paper type] [paper size] load [orientation]p.282Check tray [x] connectionp.283Close door or insert cartridgep.283Close finisher rear doorp.283Close rear doorp.283Complex page, some data may not have printed [39]p.283Configuration change, some held jobs were not restored [57]p.284Defective flash detected [51]p.284Disk full [62]p.284Disk must be formatted for use in this devicep.284Disk near full. Securely clearing disk space.p.284Empty the hole punch boxp.285Error reading USB drive. Remove USB.p.285Error reading USB hub. Remove hub.p.285Imaging unit low [84.xy]p.285Imaging unit nearly low [84.xy]p.285Imaging unit very low, [x] estimated pages remain [84.xy]p.285Incompatible output bin [x] [59]p.285Incompatible tray [x] [59]p.286Incorrect paper size, open [paper source] [34]p.286Insert hole punch boxp.286Insert staple cartridgep.286Insert Tray [x]p.286Install bin [x]p.287Install Tray [x]p.287Insufficient memory for Flash Memory Defragment operation [37]p.287Insufficient memory, some Held Jobs were deleted [37]p.287Insufficient memory, some held jobs will not be restored [37]p.288Insufficient memory to collate job [37]p.288Insufficient memory to support Resource Save feature [35]p.288Load [paper source] with [custom string] [paper orientation]p.288Load [paper source] with [custom type name] [paper orientation]p.288Load [paper source] with [paper size] [paper orientation]p.289Load [paper source] with [paper type] [paper size] [paper orientation]p.289Load multipurpose feeder with [custom string] [orientation]p.289Load multipurpose feeder with [custom type name] [orientation]p.289Load multipurpose feeder with [paper size] [orientation]p.290Load multipurpose feeder with [paper type] [paper size] [orientation]p.290Load staplesp.290Maintenance kit low [80.xy]p.290Maintenance kit nearly low [80.xy]p.290Maintenance kit very low [80.xy]p.291Memory full [38]p.291Misfeed cleared, extra sheets in output bin [24y.xx]p.291Network [x] software error [54]p.291Non-Lexmark [supply type], see User’s Guide [33.xy]p.291Not enough free space in flash memory for resources [52]p.292Paper changes neededp.292Parallel port [x] disabled [56]p.292Printer had to restart. Last job may be incomplete.p.292Reattach bin [x]p.293Reattach bins [x] – [y]p.293Reinstall missing or unresponsive cartridge [31.xy]p.294Reinstall missing or unresponsive imaging unit [31.xy]p.294Remove defective disk [61]p.294Remove packaging material, [area name]p.294Remove paper from all binsp.294Remove paper from bin [x]p.294Remove paper from [linked set bin name]p.295Remove paper from standard output binp.295Replace cartridge, printer region mismatch [42.xy]p.295Replace defective imaging unit [31.xy]p.295Replace imaging unit, 0 estimated pages remain [84.xy]p.296Replace maintenance kit, recommended life exceeded [80.xyz]p.296Replace maintenance kit to resume printing [80.xy]p.296Replace missing cartridge [31.xy]p.296Replace missing fuser [31.xyz]p.296Replace missing imaging unit [31.xy]p.296Replace roller kit [81.xx]p.296Replace unsupported cartridge [32.xy]p.296Replace unsupported imaging unit [32.xy]p.297Replace wiperp.297Restore held jobs?p.298Serial port [x] disabled [56]p.298Some held jobs were not restoredp.298Standard network software error [54]p.298Standard USB port disabled [56]p.298Supply needed to complete jobp.299The device is operating in Safe Mode. Some print options may be disabled or provide unexpected results.p.299Too many bins attached [58]p.299Too many disks installed [58]p.299Too many flash options installed [58]p.299Too many trays attached [58]p.299Tray [x] paper size unsupportedp.300Unformatted flash detected [53]p.300Unsupported diskp.300Unsupported option in slot [x] [55]p.300USB port [x] disabled [56]p.300Solving printer problemsp.301Printer does not respondp.301The printer is not respondingp.301Printer display is blankp.303Printing problemsp.303Confidential and other held documents do not printp.303Envelope seals when printingp.304Error message about reading the flash drive appearsp.305Incorrect characters printp.306Job prints from the wrong tray or on the wrong paperp.306Large jobs do not collatep.307Multiple-language PDF files do not printp.307Print job takes longer than expectedp.308Print jobs do not printp.309Printing slows downp.310Tray linking does not workp.310Unexpected page breaks occurp.311Hardware and internal option problemsp.3122100-sheet tray problemsp.312Cannot detect internal optionp.313Internal print server does not operate correctlyp.314Internal Solutions Port does not operate correctlyp.314Tray problemsp.315USB/parallel interface card does not operate correctlyp.316Paper feed problemsp.316Jammed pages are not reprintedp.316Paper frequently jamsp.317Paper jam message remains after jam is clearedp.317Print quality problemsp.318Characters have jagged or uneven edgesp.318Clipped pages or imagesp.318Compressed images appear on printsp.319Gray background on printsp.320Horizontal voids appear on printsp.321Incorrect margins on printsp.322Paper curlp.323Print irregularitiesp.323Print is too darkp.325Print is too lightp.326Printer is printing blank pagesp.327Printer is printing solid black pagesp.328Repeating defects appear on printsp.329Shadow images appear on printsp.330Skewed printp.330Streaked horizontal lines appear on printsp.331Streaked vertical lines appear on printsp.332Toner fog or background shading appears on printsp.334Toner rubs offp.334Toner specks appear on printsp.335Transparency print quality is poorp.335Uneven print densityp.335Vertical voids appear on printsp.336Solving home screen application problemsp.337An application error has occurredp.337Embedded Web Server does not openp.338Contacting customer supportp.339Noticesp.340Product informationp.340Edition noticep.340GOVERNMENT END USERSp.340Trademarksp.341Licensing noticesp.342Noise emission levelsp.342Waste from Electrical and Electronic Equipment (WEEE) directivep.342India E-Waste noticep.343Product disposalp.343Static sensitivity noticep.343ENERGY STARp.343Temperature informationp.343Laser noticep.344Laser advisory labelp.344Power consumptionp.344Product power consumptionp.344Sleep Modep.345Hibernate Modep.345Off modep.346Total energy usagep.346Patent acknowledgmentp.346Multiple model informationp.346STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.347Federal Communications Commission (FCC) compliance information statementp.349日本の VCCI 規定p.350European Community (EC) directives conformityp.350Model-specific informationp.350Federal Communications Commission (FCC) compliance information statementp.351Japanese VCCI noticep.351European Community (EC) directives conformityp.351Radio interference noticep.352Indexp.353
Page 1 of the Lexmark MS818 user manual — 210, 230, 23E, 410, 430, 630, 63E
Page 1 · click to enlarge
Page 1

MS810, MS811, MS812, MS817, MS818

User's Guide

May 2017 www.lexmark.com

Machine type(s):

Model(s):

210, 230, 23E, 410, 430, 630, 63E

Page 2 of the Lexmark MS818 user manual — Table of Contents
Page 2 · Contents
Contents

Contents

Contentsp.2Safety informationp.5Conventionsp.5Overviewp.8Using this guidep.8Finding information about the printerp.8Selecting a location for the printerp.10Additional printer setupp.12Installing internal optionsp.12Available internal optionsp.12Accessing the controller boardp.12Installing a memory cardp.16Installing an Internal Solutions Portp.17Installing an optional cardp.22Installing a printer hard diskp.23Removing a printer hard diskp.27Installing hardware optionsp.29Order of installationp.29Installing optional traysp.30Attaching cablesp.33Setting up the printer softwarep.35Installing the printer softwarep.35Adding available options in the print driverp.35Networkingp.36Preparing to set up the printer on an Ethernet networkp.36Preparing to set up the printer on a wireless networkp.36Connecting the printer to a network using the Wireless Setup Wizardp.37Connecting the printer to a wireless network using the Wi-Fi Protected Setupp.38Connecting the printer to a wireless network using the Embedded Web Serverp.39Setting up serial printing (Windows only)p.40Verifying printer setupp.40Using MS810n, MS810dn, MS811n, MS811dn, MS812dn, MS817n, MS817dn, MS818dnp.41Learning about the printerp.41Printer configurationsp.41Using the printer control panelp.43Understanding the colors of the Sleep button and indicator lightsp.44Loading paper and specialty mediap.44Setting the paper size and typep.44Configuring Universal paper settingsp.44Loading the 250or 550-sheet trayp.45Loading the 2100-sheet trayp.52Loading the multipurpose feederp.59Linking and unlinking traysp.64Linking and unlinking traysp.64Creating a custom name for a paper typep.64Assigning a custom paper typep.65Printingp.66Printing a documentp.66Printing from a computerp.66Adjusting toner darknessp.66Printing from a flash drivep.67Printing from a flash drivep.67Supported flash drives and file typesp.68Printing from a mobile devicep.69Printing from a mobile device using Mopria Print Servicep.69Printing from a mobile device using Google Cloud Printp.69Printing from a mobile device using AirPrintp.69Printing from a mobile device using Lexmark Mobile Printp.70Printing confidential and other held jobsp.70Storing print jobs in the printerp.70Printing held jobsp.71Printing information pagesp.71Printing a font sample listp.71Printing a directory listp.71Canceling a print jobp.71Canceling a print job from the printer control panelp.71Canceling a print job from the computerp.72Managing your printerp.72Finding advanced networking and administrator informationp.72Accessing the remote control panelp.72Configuring supply notifications from the Embedded Web Serverp.72Modifying confidential print settingsp.73Copying printer settings to other printersp.74Printing a menu settings pagep.74Printing a network setup pagep.75Checking the status of parts and suppliesp.75Checking the status of parts and supplies on the printer control panelp.75Checking the status of parts and supplies from the Embedded Web Serverp.75Saving energyp.75Using Eco-Modep.75Reducing printer noisep.76Adjusting Sleep modep.77Using Hibernate modep.77Restoring factory default settingsp.78Securing the printerp.78Using the security lock featurep.78Statement of Volatilityp.78Erasing volatile memoryp.79Erasing non-volatile memoryp.80Erasing printer hard disk memoryp.80Configuring printer hard disk encryptionp.81Finding printer security informationp.82Using MS810dep.83Learning about the printerp.83Printer configurationsp.83Using the printer control panelp.85Understanding the colors of the Sleep button and indicator lightsp.86Understanding the home screenp.86Using the touch-screen buttonsp.88Setting up and using the home screen applicationsp.89Finding the IP address of the computerp.89Finding the IP address of the printerp.89Accessing the Embedded Web Serverp.89Customizing the home screenp.90Activating the home screen applicationsp.90Finding information about the home screen applicationsp.90Using Background and Idle Screenp.90Setting up Forms and Favoritesp.91Understanding Eco-Settingsp.91Exporting and importing a configurationp.92Setting up Remote Operator Panelp.92Loading paper and specialty mediap.93Setting the paper size and typep.93Configuring Universal paper settingsp.93Loading the 250or 550-sheet trayp.93Loading the 2100-sheet trayp.100Loading the multipurpose feederp.107Linking and unlinking traysp.112Linking and unlinking traysp.112Creating a custom name for a paper typep.112Assigning a custom paper typep.113Printingp.113Printing a documentp.113Printing from a computerp.113Printing formsp.114Adjusting toner darknessp.114Printing from a flash drivep.115Printing from a flash drivep.115Supported flash drives and file typesp.116Printing from a mobile devicep.117Printing from a mobile device using Mopria Print Servicep.117Printing from a mobile device using Google Cloud Printp.117Printing from a mobile device using AirPrintp.117Printing from a mobile device using Lexmark Printp.117Printing confidential and other held jobsp.118Storing print jobs in the printerp.118Printing held jobsp.118Printing information pagesp.119Printing a font sample listp.119Printing a directory listp.119Canceling a print jobp.119Canceling a print job from the printer control panelp.119Canceling a print job from the computerp.119Managing your printerp.120Finding advanced networking and administrator informationp.120Checking the virtual displayp.120Configuring supply notifications from the Embedded Web Serverp.120Modifying confidential print settingsp.121Copying printer settings to other printersp.121Printing a menu settings pagep.122Printing a network setup pagep.122Checking the status of parts and suppliesp.122Checking the status of parts and supplies on the printer control panelp.122Checking the status of parts and supplies from the Embedded Web Serverp.122Saving energyp.123Using Eco-Modep.123Reducing printer noisep.123Adjusting Sleep modep.124Using Hibernate modep.124Restoring factory default settingsp.124Securing the printerp.125Using the security lock featurep.125Statement of Volatilityp.125Erasing volatile memoryp.126Erasing non-volatile memoryp.127Erasing printer hard disk memoryp.127Configuring printer hard disk encryptionp.128Finding printer security informationp.129Using MS812dep.130Learning about the printerp.130Printer configurationsp.130Using the printer control panelp.132Understanding the colors of the Sleep button and indicator lightsp.133Understanding the home screenp.133Using the touch-screen buttonsp.134Setting up and using the home screen applicationsp.137Finding the IP address of the computerp.137Finding the IP address of the printerp.137Accessing the Embedded Web Serverp.137Customizing the home screenp.138Activating the home screen applicationsp.138Finding information about the home screen applicationsp.138Using Background and Idle Screenp.138Setting up Forms and Favoritesp.139Understanding Eco-Settingsp.139Exporting and importing a configurationp.140Setting up Remote Operator Panelp.140Loading paper and specialty mediap.141Setting the paper size and typep.141Configuring Universal paper settingsp.141Loading the 250or 550-sheet trayp.142Loading the 2100-sheet trayp.149Loading the multipurpose feederp.156Linking and unlinking traysp.161Linking and unlinking traysp.161Creating a custom name for a paper typep.161Assigning a custom paper typep.162Printingp.162Printing a documentp.162Printing from a computerp.162Printing formsp.162Adjusting toner darknessp.163Printing from a flash drivep.163Printing from a flash drivep.163Supported flash drives and file typesp.164Printing from a mobile devicep.165Printing from a mobile device using Mopria Print Servicep.165Printing from a mobile device using Google Cloud Printp.165Printing from a mobile device using AirPrintp.165Printing from a mobile device using Lexmark Printp.166Printing confidential and other held jobsp.166Storing print jobs in the printerp.166Printing held jobsp.167Printing information pagesp.167Printing a font sample listp.167Printing a directory listp.167Canceling a print jobp.168Canceling a print job from the printer control panelp.168Canceling a print job from the computerp.168Managing your printerp.168Finding advanced networking and administrator informationp.168Checking the virtual displayp.168Configuring supply notifications from the Embedded Web Serverp.168Modifying confidential print settingsp.169Copying printer settings to other printersp.170Printing a menu settings pagep.170Printing a network setup pagep.170Checking the status of parts and suppliesp.171Checking the status of parts and supplies on the printer control panelp.171Checking the status of parts and supplies from the Embedded Web Serverp.171Saving energyp.171Using Eco-Modep.171Reducing printer noisep.172Adjusting Sleep modep.173Using Hibernate modep.173Restoring factory default settingsp.173Securing the printerp.174Using the security lock featurep.174Statement of Volatilityp.174Erasing volatile memoryp.175Erasing non-volatile memoryp.175Erasing printer hard disk memoryp.176Configuring printer hard disk encryptionp.176Finding printer security informationp.177Paper and specialty media guidep.178Using specialty mediap.178Tips on using card stockp.178Tips on using envelopesp.178Tips on using labelsp.179Tips on using transparenciesp.179Paper guidelinesp.180Paper characteristicsp.180Selecting paperp.181Selecting preprinted forms and letterheadp.181Using recycled paper and other office papersp.181Storing paperp.182Supported paper sizes, types, and weightsp.183Paper types and weights supported by the printerp.183Paper sizes supported by the printerp.183Paper sizes, types, and weights supported by the output optionsp.185Understanding the printer menusp.189Menus listp.189Paper menup.190Default Source menup.190Paper Size/Type menup.190Configure MP menup.193Substitute Size menup.193Paper Texture menup.194Paper Weight menup.195Paper Loading menup.197Custom Types menup.198Custom Names menup.198Custom Bin Names menup.199Universal Setup menup.199Bin Setup menup.200Reports menup.201Reports menup.201Network/Ports menup.202Active NIC menup.202Standard Network or Network [x] menup.202Reports menup.204Network Card menup.204TCP/IP menup.205IPv6 menup.206Wireless menup.206AppleTalk menup.207Standard USB menup.208Parallel [x] menup.209Serial [x] menup.212SMTP Setup menup.214Security menup.215Edit Security Setups menup.215Miscellaneous Security Settings menup.216Confidential Print menup.217Erase Temporary Data Files menup.217Security Audit Log menup.218Set Date and Time menup.218Settings menup.220General Settings menup.220Flash Drive Menup.229Print Settings menup.229Print Settingsp.231Setup menup.231Finishing menup.233Quality menup.236Job Accounting menup.236Utilities menup.238XPS menup.238PDF menup.239PostScript menup.239PCL Emul menup.239PPDS menup.242HTML menup.244Image menup.245Help menup.245Saving money and the environmentp.247Adjusting the brightness of the printer displayp.247Saving paper and tonerp.247Using recycled paperp.247Conserving suppliesp.248Recyclingp.248Recycling Lexmark productsp.248Recycling Lexmark packagingp.248Returning Lexmark cartridges for reuse or recyclingp.248Maintaining the printerp.250Ordering suppliesp.250Using genuine Lexmark parts and suppliesp.250Estimated number of remaining pagesp.250Ordering toner cartridgesp.250Ordering an imaging unitp.252Ordering staple cartridgesp.252Ordering a roller kitp.252Ordering a maintenance kitp.252Storing suppliesp.253Replacing suppliesp.254Replacing the toner cartridgep.254Replacing the imaging unitp.256Replacing a staple cartridgep.259Cleaning printer partsp.260Cleaning the printerp.260Emptying the hole punch boxp.261Moving the printerp.262Moving the printer to another locationp.262Shipping the printerp.262Clearing jamsp.263Avoiding jamsp.263Identifying jam locationsp.265Paper jam in the front doorp.267Paper jam in the rear doorp.268Paper jam in the standard binp.271Paper jam in the duplex unitp.271Paper jam in traysp.272Paper jam in the multipurpose feederp.273Paper jam in the staple finisherp.274Staple jam in the finisherp.276Paper jam in the output expanderp.279Paper jam in the mailboxp.280Troubleshootingp.282Understanding the printer messagesp.282Cartridge, imaging unit mismatch [41.xy]p.282Change [paper source] to [custom string] load [orientation]p.282Change [paper source] to [custom type name] load [orientation]p.282Change [paper source] to [paper size] load [orientation]p.282Change [paper source] to [paper type] [paper size] load [orientation]p.282Check tray [x] connectionp.283Close door or insert cartridgep.283Close finisher rear doorp.283Close rear doorp.283Complex page, some data may not have printed [39]p.283Configuration change, some held jobs were not restored [57]p.284Defective flash detected [51]p.284Disk full [62]p.284Disk must be formatted for use in this devicep.284Disk near full. Securely clearing disk space.p.284Empty the hole punch boxp.285Error reading USB drive. Remove USB.p.285Error reading USB hub. Remove hub.p.285Imaging unit low [84.xy]p.285Imaging unit nearly low [84.xy]p.285Imaging unit very low, [x] estimated pages remain [84.xy]p.285Incompatible output bin [x] [59]p.285Incompatible tray [x] [59]p.286Incorrect paper size, open [paper source] [34]p.286Insert hole punch boxp.286Insert staple cartridgep.286Insert Tray [x]p.286Install bin [x]p.287Install Tray [x]p.287Insufficient memory for Flash Memory Defragment operation [37]p.287Insufficient memory, some Held Jobs were deleted [37]p.287Insufficient memory, some held jobs will not be restored [37]p.288Insufficient memory to collate job [37]p.288Insufficient memory to support Resource Save feature [35]p.288Load [paper source] with [custom string] [paper orientation]p.288Load [paper source] with [custom type name] [paper orientation]p.288Load [paper source] with [paper size] [paper orientation]p.289Load [paper source] with [paper type] [paper size] [paper orientation]p.289Load multipurpose feeder with [custom string] [orientation]p.289Load multipurpose feeder with [custom type name] [orientation]p.289Load multipurpose feeder with [paper size] [orientation]p.290Load multipurpose feeder with [paper type] [paper size] [orientation]p.290Load staplesp.290Maintenance kit low [80.xy]p.290Maintenance kit nearly low [80.xy]p.290Maintenance kit very low [80.xy]p.291Memory full [38]p.291Misfeed cleared, extra sheets in output bin [24y.xx]p.291Network [x] software error [54]p.291Non-Lexmark [supply type], see User’s Guide [33.xy]p.291Not enough free space in flash memory for resources [52]p.292Paper changes neededp.292Parallel port [x] disabled [56]p.292Printer had to restart. Last job may be incomplete.p.292Reattach bin [x]p.293Reattach bins [x] – [y]p.293Reinstall missing or unresponsive cartridge [31.xy]p.294Reinstall missing or unresponsive imaging unit [31.xy]p.294Remove defective disk [61]p.294Remove packaging material, [area name]p.294Remove paper from all binsp.294Remove paper from bin [x]p.294Remove paper from [linked set bin name]p.295Remove paper from standard output binp.295Replace cartridge, printer region mismatch [42.xy]p.295Replace defective imaging unit [31.xy]p.295Replace imaging unit, 0 estimated pages remain [84.xy]p.296Replace maintenance kit, recommended life exceeded [80.xyz]p.296Replace maintenance kit to resume printing [80.xy]p.296Replace missing cartridge [31.xy]p.296Replace missing fuser [31.xyz]p.296Replace missing imaging unit [31.xy]p.296Replace roller kit [81.xx]p.296Replace unsupported cartridge [32.xy]p.296Replace unsupported imaging unit [32.xy]p.297Replace wiperp.297Restore held jobs?p.298Serial port [x] disabled [56]p.298Some held jobs were not restoredp.298Standard network software error [54]p.298Standard USB port disabled [56]p.298Supply needed to complete jobp.299The device is operating in Safe Mode. Some print options may be disabled or provide unexpected results.p.299Too many bins attached [58]p.299Too many disks installed [58]p.299Too many flash options installed [58]p.299Too many trays attached [58]p.299Tray [x] paper size unsupportedp.300Unformatted flash detected [53]p.300Unsupported diskp.300Unsupported option in slot [x] [55]p.300USB port [x] disabled [56]p.300Solving printer problemsp.301Printer does not respondp.301The printer is not respondingp.301Printer display is blankp.303Printing problemsp.303Confidential and other held documents do not printp.303Envelope seals when printingp.304Error message about reading the flash drive appearsp.305Incorrect characters printp.306Job prints from the wrong tray or on the wrong paperp.306Large jobs do not collatep.307Multiple-language PDF files do not printp.307Print job takes longer than expectedp.308Print jobs do not printp.309Printing slows downp.310Tray linking does not workp.310Unexpected page breaks occurp.311Hardware and internal option problemsp.3122100-sheet tray problemsp.312Cannot detect internal optionp.313Internal print server does not operate correctlyp.314Internal Solutions Port does not operate correctlyp.314Tray problemsp.315USB/parallel interface card does not operate correctlyp.316Paper feed problemsp.316Jammed pages are not reprintedp.316Paper frequently jamsp.317Paper jam message remains after jam is clearedp.317Print quality problemsp.318Characters have jagged or uneven edgesp.318Clipped pages or imagesp.318Compressed images appear on printsp.319Gray background on printsp.320Horizontal voids appear on printsp.321Incorrect margins on printsp.322Paper curlp.323Print irregularitiesp.323Print is too darkp.325Print is too lightp.326Printer is printing blank pagesp.327Printer is printing solid black pagesp.328Repeating defects appear on printsp.329Shadow images appear on printsp.330Skewed printp.330Streaked horizontal lines appear on printsp.331Streaked vertical lines appear on printsp.332Toner fog or background shading appears on printsp.334Toner rubs offp.334Toner specks appear on printsp.335Transparency print quality is poorp.335Uneven print densityp.335Vertical voids appear on printsp.336Solving home screen application problemsp.337An application error has occurredp.337Embedded Web Server does not openp.338Contacting customer supportp.339Noticesp.340Product informationp.340Edition noticep.340GOVERNMENT END USERSp.340Trademarksp.341Licensing noticesp.342Noise emission levelsp.342Waste from Electrical and Electronic Equipment (WEEE) directivep.342India E-Waste noticep.343Product disposalp.343Static sensitivity noticep.343ENERGY STARp.343Temperature informationp.343Laser noticep.344Laser advisory labelp.344Power consumptionp.344Product power consumptionp.344Sleep Modep.345Hibernate Modep.345Off modep.346Total energy usagep.346Patent acknowledgmentp.346Multiple model informationp.346STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.347Federal Communications Commission (FCC) compliance information statementp.349日本の VCCI 規定p.350European Community (EC) directives conformityp.350Model-specific informationp.350Federal Communications Commission (FCC) compliance information statementp.351Japanese VCCI noticep.351European Community (EC) directives conformityp.351Radio interference noticep.352Indexp.353
Page 5 of the Lexmark MS818 user manual — Safety information
Page 5 · click to enlarge
Page 5

Safety information

Conventions

Different types of caution statements include:

This product uses a printing process that heats the print media, and the heat may cause the media to release emissions. You must understand the section in your operating instructions that discusses the guidelines for selecting print media to avoid the possibility of harmful emissions.

Safety information 5

Page 6 of the Lexmark MS818 user manual — Safety information
Page 6 · click to enlarge
Page 6
  • CAUTION—POTENTIAL INJURY: When moving the printer, follow these guidelines to avoid personal injury or printer damage:
  • Make sure that all doors and trays are closed.
  • Turn off the printer, and then unplug the power cord from the electrical outlet.
  • Disconnect all cords and cables from the printer.
  • If the printer has a caster base, then carefully roll it to the new location. Use caution when passing over thresholds and breaks in flooring.
  • If the printer does not have a caster base but is configured with optional trays, then lift the printer off the trays. Do not try to lift the printer and the trays at the same time.
  • Always use the handholds on the printer to lift it.
  • Any cart used to move the printer must have a surface able to support the full footprint of the printer.
  • Any cart used to move the hardware options must have a surface able to support the dimensions of the options.
  • Keep the printer in an upright position.
  • Avoid severe jarring movements.
  • Make sure that your fingers are not under the printer when you set it down.
  • Make sure that there is adequate clearance around the printer.

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

This product is designed, tested, and approved to meet strict global safety standards with the use of specific manufacturer's components. The safety features of some parts may not always be obvious. The manufacturer is not responsible for the use of other replacement parts.

CAUTION—POTENTIAL INJURY: Do not cut, twist, bind, crush, or place heavy objects on the power cord. Do not subject the power cord to abrasion or stress. Do not pinch the power cord between objects such as furniture and walls. If any of these things happen, a risk of fire or electrical shock results. Inspect the power cord regularly for signs of such problems. Remove the power cord from the electrical outlet before inspecting it.

Refer service or repairs, other than those described in the user documentation, to a service representative.

Safety information 6

Page 7 of the Lexmark MS818 user manual — Safety information
Page 7 · click to enlarge
Page 7

SAVE THESE INSTRUCTIONS.

Safety information 7

Page 8 of the Lexmark MS818 user manual — Finding information about the printer
Page 8 · click to enlarge
Page 8

Overview

Using this guide

This User’s Guide provides general and specific information on using the printer models that are listed on the cover page.

The following chapters contain information applicable to all printer models:

  • Safety information
  • Selecting a location for the printer
  • Additional printer setup
  • Paper and specialty media guide
  • Understanding printer menus
  • Saving money and the environment
  • Maintaining the printer
  • Clearing jams
  • Troubleshooting

To find instructions for your printer:

  • Use the table of contents.
  • Use the Search function or the Find toolbar of your application to search for page content.

Finding information about the printer

What are you looking for?Find it here Initial setup instructions: • Connecting the printer • Installing the printer softwareSetup documentation—The setup documentation came with the printer and is also available at http://support.lexmark.com. Additional setup and instructions for using the printer: • Selecting and storing paper and specialty media • Loading paper • Configuring printer settings • Viewing and printing documents and photos • Setting up and using the printer software • Configuring the printer on a network • Caring for and maintaining the printer • Troubleshooting and solving problemsUser's Guide and Quick Reference Guide—The guides are available at http://support.lexmark.com. Note: These guides are also available in other languages. Information on setting up and configuring the accessibility features of your printerLexmark Accessibility Guide—This guide is available at http://support.lexmark.com.

Overview 8

Page 9 of the Lexmark MS818 user manual — Overview
Page 9 · click to enlarge
Page 9
What are you looking for?Find it here Help using the printer softwareWindows or Mac Help—Open a printer software program or application, and then click Help. ? Click to view context‑sensitive information. Notes: • Help is automatically installed with the printer software. • The printer software is located in the printer program folder or on the desktop, depending on your operating system. The latest supplemental information, updates, and customer support: • Documentation • Driver downloads • Live chat support • E‑mail support • Voice supportLexmark support Web site— http://support.lexmark.com Note: Select your country or region, and then select your product to view the appropriate support site. Support telephone numbers and hours of operation for your country or region can be found on the support Web site or on the printed warranty that came with your printer. Record the following information (located on the store receipt and at the back of the printer), and have it ready when you contact customer support so that they may serve you faster: • Machine Type number • Serial number • Date purchased • Store where purchased Warranty informationWarranty information varies by country or region: • In the U.S.—See the Statement of Limited Warranty included with this printer, or go to http://support.lexmark.com. • In other countries and regions—See the printed warranty that came with this printer.

Overview 9

Page 10 of the Lexmark MS818 user manual — Selecting a location for the printer
Page 10 · click to enlarge
Page 10

Selecting a location for the printer 10

Selecting a location for the printer

When selecting a location for the printer, leave enough room to open trays, covers, and doors. If you plan to install any hardware options, then leave enough room for them also. It is important to:

  • Set up the printer near a properly grounded and easily accessible electrical outlet.
  • Make sure airflow in the room meets the latest revision of the ASHRAE 62 standard or the CEN Technical Committee 156 standard.
  • Provide a flat, sturdy, and stable surface.
  • Keep the printer: – Clean, dry, and free of dust. – Away from stray staples and paper clips. – Away from the direct airflow of air conditioners, heaters, or ventilators. – Free from direct sunlight and humidity extremes.
  • Observe the recommended temperatures and avoid fluctuations:

Ambient temperature 15.6 to 32.2°C (60 to 90°F)

Storage temperature ‑40 to 60°C (-40 to 140°F)

Lexmark MS818 — Selecting a location for the printer diagram (page 10)
Fig. 1 · Selecting a location for the printer
1Right side152 mm (6 in.) 2Front508 mm (20 in.) 3Left side152 mm (6 in.) 4Rear152 mm (6 in.) 5Top115 mm (4.5 in.)
Page 11 of the Lexmark MS818 user manual — Selecting a location for the printer
Page 11 · click to enlarge
Page 11

Selecting a location for the printer 11

Lexmark MS818 — Selecting a location for the printer diagram (page 11)
Fig. 2 · Selecting a location for the printer
Right side 2Front508 mm (20 in.) 3Left side152 mm (6 in.) 4Rear152 mm (6 in.) Top
Right side 2Front508 mm (20 in.) 3Left side152 mm (6 in.) 4Rear152 mm (6 in.) Top
Page 12 of the Lexmark MS818 user manual — Accessing the controller board
Page 12 · click to enlarge
Page 12

Additional printer setup 12

Additional printer setup

Installing internal options

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

Available internal options

  • Memory card – DDR3 DIMM – Flash memory
  • Fonts
  • Firmware cards – Forms and Bar Code – PRESCRIBE – IPDS
  • Printer hard disk
  • Lexmark TM Internal Solutions Ports (ISP) – Parallel 1284-B interface – MarkNet TM N8350 802.11 b/g/n wireless printer server – RS-232-C serial interface

Accessing the controller board

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

1 Remove the controller board access cover.

Lexmark MS818 — Accessing the controller board diagram (page 12)
Fig. 3 · Accessing the controller board
Lexmark MS818 — Accessing the controller board diagram (page 12)
Fig. 4 · Accessing the controller board
Page 13 of the Lexmark MS818 user manual — Additional printer setup
Page 13 · click to enlarge
Page 13

Additional printer setup 13

2 Using a screwdriver, loosen the screws on the controller board shield.

Lexmark MS818 — Additional printer setup diagram (page 13)
Fig. 5 · Additional printer setup
Lexmark MS818 — Additional printer setup diagram (page 13)
Fig. 6 · Additional printer setup

3 Remove the shield.

Lexmark MS818 — Additional printer setup diagram (page 13)
Fig. 7 · Additional printer setup
Page 14 of the Lexmark MS818 user manual — Additional printer setup
Page 14 · click to enlarge
Page 14

Additional printer setup 14

4 Use the following illustration to locate the appropriate connector:

Lexmark MS818 — Additional printer setup diagram (page 14)
Fig. 8 · Additional printer setup

1 Lexmark Internal Solutions Port or printer hard disk connector

2 Option card connector

3 Memory card connector

Page 15 of the Lexmark MS818 user manual — Additional printer setup
Page 15 · click to enlarge
Page 15

Additional printer setup 15

5 Align the screws with the holes on the shield, and then reattach the shield.

6 Tighten the screws on the shield.

Page 16 of the Lexmark MS818 user manual — Installing a memory card
Page 16 · click to enlarge
Page 16

Additional printer setup 16

7 Reattach the access cover.

Lexmark MS818 — Installing a memory card diagram (page 16)
Fig. 9 · Installing a memory card
Lexmark MS818 — Installing a memory card diagram (page 16)
Fig. 10 · Installing a memory card

Installing a memory card

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

An optional memory card can be purchased separately and attached to the controller board.

1 Access the controller board.

For more information, see “Accessing the controller board” on page 12.

2 Unpack the memory card.

3 Align the notch (1) on the memory card with the ridge (2) on the connector.

Lexmark MS818 — Installing a memory card diagram (page 16)
Fig. 11 · Installing a memory card
Page 17 of the Lexmark MS818 user manual — Installing an Internal Solutions Port
Page 17 · click to enlarge
Page 17

Additional printer setup 17

4 Push the memory card straight into the connector, and then push the card toward the controller board wall until it clicks into place.

Lexmark MS818 — Installing an Internal Solutions Port diagram (page 17)
Fig. 12 · Installing an Internal Solutions Port

5 Reattach the controller board shield, and then the controller board access cover.

Installing an Internal Solutions Port

The controller board supports one optional Lexmark Internal Solutions Port (ISP).

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

1 Access the controller board.

For more information, see “Accessing the controller board” on page 12.

2 If an optional printer hard disk is installed, then remove the printer hard disk first.

For more information, see “Removing a printer hard disk” on page 27.

Page 18 of the Lexmark MS818 user manual — Installing an Internal Solutions Port
Page 18 · click to enlarge
Page 18

Additional printer setup 18

3 Unpack the ISP kit.

Lexmark MS818 — Installing an Internal Solutions Port diagram (page 18)
Fig. 13 · Installing an Internal Solutions Port
Lexmark MS818 — Installing an Internal Solutions Port diagram (page 18)
Fig. 14 · Installing an Internal Solutions Port

2 Screw for attaching the plastic bracket to the ISP

3 Screws for attaching the ISP mounting bracket to the controller board shield

4 Remove the metal cover from the ISP opening. a Loosen the screw.

Lexmark MS818 — Installing an Internal Solutions Port diagram (page 18)
Fig. 15 · Installing an Internal Solutions Port

b Lift the metal cover, and then pull it out completely.

1 ISP solution · 4 Plastic bracket

Page 19 of the Lexmark MS818 user manual — Installing an Internal Solutions Port
Page 19 · click to enlarge
Page 19

Additional printer setup 19

Lexmark MS818 — Installing an Internal Solutions Port diagram (page 19)
Fig. 16 · Installing an Internal Solutions Port
Lexmark MS818 — Installing an Internal Solutions Port diagram (page 19)
Fig. 17 · Installing an Internal Solutions Port
Lexmark MS818 — Installing an Internal Solutions Port diagram (page 19)
Fig. 18 · Installing an Internal Solutions Port

5 Align the posts of the plastic bracket with the holes on the controller board cage, and then press the plastic bracket on the controller board cage until it clicks into place. Make sure the cables are neatly tucked under the plastic bracket.

Lexmark MS818 — Installing an Internal Solutions Port diagram (page 19)
Fig. 19 · Installing an Internal Solutions Port
Lexmark MS818 — Installing an Internal Solutions Port diagram (page 19)
Fig. 20 · Installing an Internal Solutions Port

6 Install the ISP on the plastic bracket.

Lexmark MS818 — Installing an Internal Solutions Port diagram (page 19)
Fig. 21 · Installing an Internal Solutions Port
Page 20 of the Lexmark MS818 user manual — Installing an Internal Solutions Port
Page 20 · click to enlarge
Page 20

Additional printer setup 20

7 Lower the ISP toward the plastic bracket until the ISP is seated between the guides of the plastic bracket.

Lexmark MS818 — Installing an Internal Solutions Port diagram (page 20)
Fig. 22 · Installing an Internal Solutions Port
Lexmark MS818 — Installing an Internal Solutions Port diagram (page 20)
Fig. 23 · Installing an Internal Solutions Port

8 Use the provided thumbscrew for the ISP to attach the plastic bracket to the ISP.

Lexmark MS818 — Installing an Internal Solutions Port diagram (page 20)
Fig. 24 · Installing an Internal Solutions Port
Page 21 of the Lexmark MS818 user manual — Installing an Internal Solutions Port
Page 21 · click to enlarge
Page 21

Additional printer setup 21

9 Attach the two provided screws to secure the ISP mounting bracket to the controller board shield.

Lexmark MS818 — Installing an Internal Solutions Port diagram (page 21)
Fig. 25 · Installing an Internal Solutions Port
Lexmark MS818 — Installing an Internal Solutions Port diagram (page 21)
Fig. 26 · Installing an Internal Solutions Port

10 Tighten the thumbscrew that is attached to the ISP.

11 Connect the ISP solution interface cable into the receptacle of the controller board.

Lexmark MS818 — Installing an Internal Solutions Port diagram (page 21)
Fig. 27 · Installing an Internal Solutions Port
Lexmark MS818 — Installing an Internal Solutions Port diagram (page 21)
Fig. 28 · Installing an Internal Solutions Port
Page 22 of the Lexmark MS818 user manual — Installing an optional card
Page 22 · click to enlarge
Page 22

Additional printer setup 22

Installing an optional card

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

1 Access the controller board.

For more information, see “Accessing the controller board” on page 12.

2 Unpack the optional card.

3 Holding the card by its sides, align the plastic pins (1) on the card with the holes (2) on the controller board.

Lexmark MS818 — Installing an optional card diagram (page 22)
Fig. 29 · Installing an optional card
Lexmark MS818 — Installing an optional card diagram (page 22)
Fig. 30 · Installing an optional card

4 Push the card firmly into place as shown in the illustration.

Lexmark MS818 — Installing an optional card diagram (page 22)
Fig. 31 · Installing an optional card
Page 23 of the Lexmark MS818 user manual — Installing a printer hard disk
Page 23 · click to enlarge
Page 23

Additional printer setup 23

5 Close the controller board access door.

Installing a printer hard disk

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

1 Access the controller board.

For more information, see “Accessing the controller board” on page 12.

2 Unpack the printer hard disk.

Page 24 of the Lexmark MS818 user manual — Installing a printer hard disk
Page 24 · click to enlarge
Page 24

Additional printer setup 24

3 Locate the appropriate connector on the controller board cage.

Lexmark MS818 — Installing a printer hard disk diagram (page 24)
Fig. 32 · Installing a printer hard disk
Lexmark MS818 — Installing a printer hard disk diagram (page 24)
Fig. 33 · Installing a printer hard disk
Page 25 of the Lexmark MS818 user manual — Installing a printer hard disk
Page 25 · click to enlarge
Page 25

Additional printer setup 25

To install a printer hard disk onto the ISP:

a Remove the screws attached to the printer hard disk mounting bracket, and then remove the bracket.

Lexmark MS818 — Installing a printer hard disk diagram (page 25)
Fig. 34 · Installing a printer hard disk

b Align the standoffs of the printer hard disk to the holes in the ISP, and then press the printer hard disk

down until the standoffs are in place.

Installation warning: Hold only the edges of the printed circuit board assembly. Do not touch or press on the center of the printer hard disk. Doing so may cause damage.

Lexmark MS818 — Installing a printer hard disk diagram (page 25)
Fig. 35 · Installing a printer hard disk

c Insert the plug of the printer hard disk interface cable into the receptacle of the ISP.

Page 26 of the Lexmark MS818 user manual — Installing a printer hard disk
Page 26 · click to enlarge
Page 26

Additional printer setup 26

Lexmark MS818 — Installing a printer hard disk diagram (page 26)
Fig. 36 · Installing a printer hard disk

4 Align the standoffs of the printer hard disk to the holes in the controller board cage, and then press the printer hard disk down until the standoffs are in place.

Installation warning: Hold only the edges of the printed circuit board assembly. Do not touch or press on the center of the printer hard disk. Doing so may cause damage.

Lexmark MS818 — Installing a printer hard disk diagram (page 26)
Fig. 37 · Installing a printer hard disk

5 Insert the plug of the printer hard disk interface cable into the receptacle of the controller board.

Page 27 of the Lexmark MS818 user manual — Removing a printer hard disk
Page 27 · click to enlarge
Page 27

Additional printer setup 27

Lexmark MS818 — Removing a printer hard disk diagram (page 27)
Fig. 38 · Removing a printer hard disk
Lexmark MS818 — Removing a printer hard disk diagram (page 27)
Fig. 39 · Removing a printer hard disk

Removing a printer hard disk

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

Page 28 of the Lexmark MS818 user manual — Removing a printer hard disk
Page 28 · click to enlarge
Page 28

Additional printer setup 28

1 Access the controller board.

For more information, see “Accessing the controller board” on page 12.

2 Unplug the printer hard disk interface cable from the controller board, leaving the cable attached to the printer hard disk. To unplug the cable, squeeze the paddle at the plug of the interface cable to disengage the latch before pulling out the cable.

3 Remove the screws holding the printer hard disk in place.

Lexmark MS818 — Removing a printer hard disk diagram (page 28)
Fig. 40 · Removing a printer hard disk
Lexmark MS818 — Removing a printer hard disk diagram (page 28)
Fig. 41 · Removing a printer hard disk
Page 29 of the Lexmark MS818 user manual — Order of installation
Page 29 · click to enlarge
Page 29

Additional printer setup 29

4 Remove the printer hard disk.

5 Set aside the printer hard disk.

Installing hardware options

Order of installation

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

Install the printer and any hardware options you have purchased in the following order:

  • Caster base
  • 2100 ‑ sheet tray or spacer
  • Optional 550 ‑ or 250 ‑ sheet tray
  • Printer

For more information on installing a caster base, optional 550‑ or 250‑sheet tray, spacer, or 2100‑sheet tray, see the setup sheet that came with the option.

Page 30 of the Lexmark MS818 user manual — Installing optional trays
Page 30 · click to enlarge
Page 30

Additional printer setup 30

Installing optional trays

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

1 Turn off the printer using the power switch, and then unplug the power cord from the electrical outlet.

Lexmark MS818 — Installing optional trays diagram (page 30)
Fig. 42 · Installing optional trays
Lexmark MS818 — Installing optional trays diagram (page 30)
Fig. 43 · Installing optional trays

2 Unpack the optional tray, and then remove all packing material.

3 Pull out the tray completely from the base.

Lexmark MS818 — Installing optional trays diagram (page 30)
Fig. 44 · Installing optional trays
Lexmark MS818 — Installing optional trays diagram (page 30)
Fig. 45 · Installing optional trays

4 Remove any packing material from inside the tray.

5 Insert the tray into the base.

6 Place the tray near the printer.

7 Align the optional tray with the caster base.

Page 31 of the Lexmark MS818 user manual — Installing optional trays
Page 31 · click to enlarge
Page 31

Additional printer setup 31

Lexmark MS818 — Installing optional trays diagram (page 31)
Fig. 46 · Installing optional trays

8 Align the printer with the tray, and then slowly lower the printer into place.

Page 32 of the Lexmark MS818 user manual — Installing optional trays
Page 32 · click to enlarge
Page 32

Additional printer setup 32

Lexmark MS818 — Installing optional trays diagram (page 32)
Fig. 47 · Installing optional trays

9 Connect the power cord to the printer, then to a properly grounded electrical outlet, and then turn on the printer.

Page 33 of the Lexmark MS818 user manual — Attaching cables
Page 33 · click to enlarge
Page 33

Additional printer setup 33

Lexmark MS818 — Attaching cables diagram (page 33)
Fig. 48 · Attaching cables
Lexmark MS818 — Attaching cables diagram (page 33)
Fig. 49 · Attaching cables
Lexmark MS818 — Attaching cables diagram (page 33)
Fig. 50 · Attaching cables

To uninstall the optional trays, slide the latch on the right side of the printer toward the front of the printer until it clicks into place, and then remove stacked trays one at a time from the top to the bottom.

Attaching cables

Connect the printer to the computer using a USB cable or Ethernet cable.

Make sure to match the following:

  • The USB symbol on the cable with the USB symbol on the printer
  • The appropriate Ethernet cable to the Ethernet port
  • The appropriate parallel cable with the parallel port
Page 34 of the Lexmark MS818 user manual — Attaching cables
Page 34 · click to enlarge
Page 34

Additional printer setup 34

Lexmark MS818 — Attaching cables diagram (page 34)
Fig. 51 · Attaching cables
Lexmark MS818 — Attaching cables diagram (page 34)
Fig. 52 · Attaching cables
Lexmark MS818 — Attaching cables diagram (page 34)
Fig. 53 · Attaching cables
Lexmark MS818 — Attaching cables diagram (page 34)
Fig. 54 · Attaching cables

1 Parallel port Connect the printer to a computer.

2 USB port Attach an optional wireless network adapter.

3 Ethernet port Connect the printer to a network.

4 USB printer port Connect the printer to a computer.

5 Security slot Attach a lock that will secure the controller board.

6 Printer power cord socket Connect the printer to a properly grounded electrical outlet.

After attaching the Ethernet cable and power cord, neatly tuck the cables in the channels at the back of the printer.

Page 35 of the Lexmark MS818 user manual — For Windows users
Page 35 · click to enlarge
Page 35

Additional printer setup 35

Lexmark MS818 — Setting up the printer software diagram (page 35)
Fig. 55 · Setting up the printer software
Lexmark MS818 — Setting up the printer software diagram (page 35)
Fig. 56 · Setting up the printer software

Setting up the printer software

Installing the printer software

  • 1 Obtain a copy of the software installer package.
  • From the software CD that came with your printer.
  • Go to <a href="http://support.lexmark.com" rel="nofollow noopener" target="_blank">http://support.lexmark.com</a> , and then select your printer and operating system.

2 Run the installer, and then follow the instructions on the computer screen.

3 For Macintosh users, add the printer.

Adding available options in the print driver

For Windows users

1 Open the printers folder.

  • 2 Select the printer you want to update, and then do the following:
  • For Windows 7 or later, select Printer properties .
  • For earlier versions, select Properties .
Page 36 of the Lexmark MS818 user manual — Preparing to set up the printer on a wireless network
Page 36 · click to enlarge
Page 36

Additional printer setup 36

3 Navigate to the Configuration tab, and then select Update Now ‑ Ask Printer.

4 Apply the changes.

For Macintosh users

1 From System Preferences in the Apple menu, navigate to your printer, and then select Options & Supplies.

2 Navigate to the list of hardware options, and then add any installed options.

3 Apply the changes.

Networking

  • Purchase a MarkNet N8350 wireless network adapter before setting up the printer on a wireless network. For information on installing the wireless network adapter, see the instruction sheet that came with the adapter.
  • A Service Set Identifier (SSID) is a name assigned to a wireless network. Wired Equivalent Privacy (WEP), Wi-Fi Protected Access (WPA), WPA2, and 802.1X-RADIUS are types of security used on a network.

Preparing to set up the printer on an Ethernet network

To configure your printer to connect to an Ethernet network, organize the following information before you begin:

  • A valid, unique IP address for the printer to use on the network
  • The network gateway
  • The network mask
  • A nickname for the printer (optional)

You will need an Ethernet cable to connect the printer to the network and an available port where the printer can physically connect to the network. Use a new network cable when possible to avoid potential problems caused by a damaged cable.

Preparing to set up the printer on a wireless network

  • Make sure your wireless network adapter is installed in your printer and working properly. For more information, see the instruction sheet that came with the wireless network adapter.
  • Make sure your access point (wireless router) is turned on and is working properly.
Page 37 of the Lexmark MS818 user manual — Connecting the printer to a network using the Wireless Setup Wizard
Page 37 · click to enlarge
Page 37

Additional printer setup 37

Make sure you have the following information before setting up the printer on a wireless network:

  • SSID —The SSID is also referred to as the network name.
  • Wireless Mode (or Network Mode) —The mode is either infrastructure or ad hoc.
  • Channel (for ad hoc networks) —The channel defaults to automatic for infrastructure networks.

Some ad hoc networks will also require the automatic setting. Check with your system support person if you are not sure which channel to select. • Security Method—There are four basic options for Security Method: – WEP key

If your network uses more than one WEP key, then enter up to four in the provided spaces. Select the key currently in use on the network by selecting the default WEP transmit key. – WPA or WPA2 preshared key or passphrase

WPA includes encryption as an additional layer of security. The choices are AES or TKIP. Encryption must be set for the same type on the router and on the printer, or the printer will not be able to communicate on the network. – 802.1X–RADIUS

If you are installing the printer on an 802.1X network, then you may need the following:

  • Authentication type
  • Inner authentication type
  • 802.1X user name and password
  • Certificates – No security

If your wireless network does not use any type of security, then you will not have any security information.

– If you do not know the SSID of the network that your computer is connected to, then launch the wireless

utility of the computer network adapter, and then look for the network name. If you cannot find the SSID or the security information for your network, then see the documentation that came with the access point, or contact your system support person. – To find the WPA/WPA2 preshared key or passphrase for the wireless network, see the documentation

that came with the access point, see the Embedded Web Server associated with the access point, or consult your system support person.

Connecting the printer to a network using the Wireless Setup Wizard

Before you begin, make sure that:

  • A wireless network adapter is installed in the printer and is working properly. For more information, see the instruction sheet that came with the wireless network adapter.
  • The Ethernet cable is disconnected from the printer.
  • Active NIC is set to Auto. To set this to Auto, navigate to one of the following:

– > Settings > > Network/Ports > > Active NIC > > Auto >

> Network/Ports > Active NIC > Auto

Page 38 of the Lexmark MS818 user manual — •
Page 38 · click to enlarge
Page 38

Additional printer setup 38

> Network/Ports > Active NIC > Auto > Submit

1 From the printer control panel, navigate to one of the following:

  • > Settings > > Network/Ports > > Network [x] > > Network [x] Setup > > Wireless

> > Wireless Connection Setup >

•

> Network/Ports > Network [x] > Network [x] Setup > Wireless > Wireless Connection Setup

•

> Network/Ports > Network [x] > Network [x] Setup > Wireless > Wireless Connection Setup

2 Select a wireless connection setup.

Search for networks Show available wireless connections.

Enter a network name Manually enter the SSID.

Wi‑Fi Protected Setup Connect the printer to a wireless network using Wi‑Fi Protected Setup.

3 Follow the instructions on the printer display.

Connecting the printer to a wireless network using the Wi-Fi Protected Setup

Before connecting the printer to a wireless network, make sure that:

  • The access point (wireless router) is Wi ‑ Fi Protected Setup (WPS) certified or WPS ‑ compatible. For more information, see the documentation that came with your access point.
  • A wireless network adapter installed in your printer is attached and working properly. For more information, see the instruction sheet that came with the wireless network adapter.

Using the Push Button Configuration method

1 Depending on your printer model, navigate to either of the following:

  • > Settings > > Networks/Ports > > Network [x] > > Network [x] Setup > >

Wireless > > Wi‑Fi Protected Setup > > Start Push Button Method

> Network/Ports > Network [x] > Network [x] Setup > Wireless > Wi‑Fi Protected Setup > Start Push Button Method

•

> Network/Ports > Network [x] > Network [x] Setup > Wireless > Wi‑Fi Protected Setup > Start Push Button Method

•

2 Follow the instructions on the printer display.

Use To

Page 39 of the Lexmark MS818 user manual — Connecting the printer to a wireless network using the Embedded Web Server
Page 39 · click to enlarge
Page 39

Additional printer setup 39

Using the Personal Identification Number (PIN) method

1 Depending on your printer model, navigate to either of the following:

  • > Settings > > Networks/Ports > > Network [x] > > Network [x] Setup > >

Wireless > > Wi‑Fi Protected Setup > > Start PIN Method

•

> Network/Ports > Network [x] > Network [x] Setup > Wireless > Wi‑Fi Protected Setup > Start PIN Method

•

> Network/Ports > Network [x] > Network [x] Setup > Wireless > Wi‑Fi Protected Setup > Start PIN Method

2 Copy the eight–digit WPS PIN.

3 Open a Web browser, and then type the IP address of your access point in the address field.

  • The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

4 Access the WPS settings. For more information, see the documentation that came with your access point.

5 Enter the eight‑digit PIN, and then save the setting.

Connecting the printer to a wireless network using the Embedded Web Server

Before you begin, make sure that:

  • Your printer is connected temporarily to an Ethernet network.
  • A wireless network adapter is installed in your printer and working properly. For more information, see the instruction sheet that came with the wireless network adapter.

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer control panel. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Network/Ports > Wireless.

3 Modify the settings to match the settings of your access point (wireless router).

4 Click Submit.

5 Turn off the printer, and then disconnect the Ethernet cable. Then wait for at least five seconds, and then turn the printer back on.

6 To verify if your printer is connected to the network, print a network setup page. Then in the Network Card [x] section, see if the status is Connected.

Page 40 of the Lexmark MS818 user manual — Verifying printer setup
Page 40 · click to enlarge
Page 40

Additional printer setup 40

Setting up serial printing (Windows only)

1 Set the parameters in the printer. a From the control panel, navigate to the menu for the port settings. b Locate the menu for the serial port settings, and then adjust the settings, if necessary.

c Apply the changes.

2 From your computer, open the printers folder, and then select your printer.

3 Open the printer properties, and then select the COM port from the list.

4 Set the COM port parameters in Device Manager.

  • Serial printing reduces printing speed.
  • Make sure that the serial cable is connected to the serial port on your printer.

Verifying printer setup

When all hardware and software options are installed and the printer is turned on, verify that the printer is set up correctly by printing the following:

  • Menu settings page —Use this page to verify that all printer options are installed correctly. A list of installed options appears toward the bottom of the page. If an option you installed is not listed, then it is not installed correctly. Remove the option, and then install it again.

For more information, see the following:

– “Printing a menu settings page” on page 74 for non‑touch‑screen printer models – “Printing a menu settings page” on page 122 or “Printing a menu settings page” on page 170 for

touch‑screen printer models • Network setup page—Use this page to verify the network connection. This page also provides important information that aids network printing configuration.

For more information, see the following:

– “Printing a network setup page” on page 75 for non‑touch‑screen printer models – “Printing a network setup page” on page 122 or “Printing a network setup page” on page 170 for

touch‑screen printer models

Page 41 of the Lexmark MS818 user manual — Fully configured model
Page 41 · click to enlarge
Page 41

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn, MS817n, MS817dn, MS818dn 41

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn, MS817n, MS817dn, MS818dn

Learning about the printer

Printer configurations

Basic model

Lexmark MS818 — Basic model diagram (page 41)
Fig. 57 · Basic model
Lexmark MS818 — Basic model diagram (page 41)
Fig. 58 · Basic model

2 Printer control panel

4 Standard 550‑sheet tray (Tray 1)

Fully configured model

1 Standard bin · 3 Multipurpose feeder

Page 42 of the Lexmark MS818 user manual — Using MS810n, MS810dn, MS811n, MS811dn, MS812dn, MS817n, MS817dn, MS818dn
Page 42 · click to enlarge
Page 42

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn, MS817n, MS817dn, MS818dn 42

The following illustration shows the maximum number of optional finishers and trays that are supported by the printer. For more information on other configurations, visit www.lexmark.com/multifunctionprinters.

Lexmark MS818 — Using MS810n, MS810dn, MS811n, MS811dn, MS812dn, MS817n, MS817dn, MS818dn diagram (page 42)
Fig. 59 · Using MS810n, MS810dn, MS811n, MS811dn, MS812dn, MS8…
Lexmark MS818 — Using MS810n, MS810dn, MS811n, MS811dn, MS812dn, MS817n, MS817dn, MS818dn diagram (page 42)
Fig. 60 · Using MS810n, MS810dn, MS811n, MS811dn, MS812dn, MS8…

Hardware option Alternative hardware option

  • 1 Staple finisher
  • Output expander
  • 4 ‑ bin mailbox
  • Staple, hole punch finisher
  • 2 4 ‑ bin mailbox
  • Staple finisher
  • Staple, hole punch finisher
  • Output expander

3 Caster base None

4 2100‑sheet tray None

5 550‑sheet tray 250‑sheet tray

6 250‑sheet tray 550‑sheet tray

7 4‑bin mailbox Output expander

8 Output expander 4‑bin mailbox

The staple, hole punch finisher must not be combined with any other output options.

In a configuration with two or more optional finishers:

  • The staple finisher must always be on top.
  • The high ‑ capacity output expander must always be at the bottom.
Page 43 of the Lexmark MS818 user manual — Using the printer control panel
Page 43 · click to enlarge
Page 43

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn, MS817n, MS817dn, MS818dn 43

  • The output expander is the only option that can be placed on top of the high ‑ capacity output expander.
  • The output expander and mailbox may be installed in any order.

When using optional trays:

  • Always use a caster base when the printer is configured with a 2100 ‑ sheet tray.
  • The 2100 ‑ sheet tray must always be at the bottom of a configuration.
  • A maximum of four optional trays may be configured with the printer.
  • The optional 250 ‑ and 550 ‑ sheet trays may be installed in any order.

Using the printer control panel

1 2 3 4 5

Lexmark MS818 — Using the printer control panel diagram (page 43)
Fig. 61 · Using the printer control panel

6 7 8 9 10

Lexmark MS818 — Using the printer control panel diagram (page 43)
Fig. 62 · Using the printer control panel
  • 1 Display
  • View the printer status.
  • Set up and operate the printer.

2 Select button Submit changes made in the printer settings.

3 Arrow buttons Scroll up and down or left and right.

5 Sleep button Enable Sleep mode or Hibernate mode.

Do the following to wake the printer from Sleep mode:

  • Press any hard button.
  • Pull out Tray 1 or load paper in the multipurpose feeder.
  • Open a door or cover.
  • Send a print job from the computer.
  • Perform a power ‑ on reset with the main power switch.
  • Attach a device to the USB port on the printer.

6 Stop or Cancel button Stop all printer activity.

9 Indicator light Check the status of the printer.

10 USB port Connect a flash drive to the printer.

Page 44 of the Lexmark MS818 user manual — Configuring Universal paper settings
Page 44 · click to enlarge
Page 44

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn, MS817n, MS817dn, MS818dn 44

Understanding the colors of the Sleep button and indicator lights

The colors of the Sleep button and indicator lights on the printer control panel signify a certain printer status or condition.

Indicator light Printer status

Off The printer is off or in Hibernate mode.

Blinking green The printer is warming up, processing data, or printing.

Solid green The printer is on, but idle.

Blinking red The printer requires user intervention.

Sleep button light Printer status

Off The printer is off, idle or in Ready state.

Solid amber The printer is in Sleep mode.

Blinking amber The printer is entering or waking from Hibernate mode.

Blinking amber for 0.1 second, then goes completely off for 1.9 seconds in a slow, pulsing pattern

The printer is in Hibernate mode.

Loading paper and specialty media

The selection and handling of paper and specialty media can affect how reliably documents print. For more information, see “Avoiding jams” on page 263 and “Storing paper” on page 182.

Setting the paper size and type

1 From the printer control panel, navigate to:

> Settings > > Paper Menu > > Paper Size/Type >

2 Press the up or down arrow button to select the tray or feeder, and then press .

3 Press the up or down arrow button to select the paper size, and then press .

4 Press the up or down arrow button to select the paper type, and then press to change the settings.

Configuring Universal paper settings

The Universal paper size is a user‑defined setting that lets you print on paper sizes that are not preset in the printer menus.

  • The smallest supported Universal size is 70 x 127 mm (2.76 x 5 inches) for one ‑ sided printing and 105 x 148 mm (4.13 x 5.83 inches) for two ‑ sided (duplex) printing.
Page 45 of the Lexmark MS818 user manual — Loading the 250 ‑ or 550 ‑ sheet tray
Page 45 · click to enlarge
Page 45

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn, MS817n, MS817dn, MS818dn 45

  • The largest supported Universal size is 216 x 356 mm (8.5 x 14 inches) for one ‑ sided and two ‑ sided printing.
  • When printing on paper less than 210 mm (8.3 inches) wide, the printer may print at a reduced speed after a period of time to ensure the best print performance.
  • If you regularly print large jobs on narrow paper, then you may use the MS710 Series printer models, which print batches of 10 or more pages of narrow paper at a faster speed. For more information on the MS710 Series printer models, contact your Lexmark sales representative.

From the printer control panel, navigate to:

> Settings > > Paper Menu > > Universal Setup > > Units of Measure > > select unit of

Loading the 250 ‑ or 550 ‑ sheet tray

1 Pull out the tray.

  • When loading folio ‑ , legal ‑ , or Oficio ‑ size paper, lift the tray slightly and pull it out completely.
  • Avoid removing trays while a job prints or while Busy appears on the display. Doing so may cause a jam.
Lexmark MS818 — Loading the 250 ‑ or 550 ‑ sheet tray diagram (page 45)
Fig. 63 · Loading the 250 ‑ or 550 ‑ sheet tray

measure >

Page 46 of the Lexmark MS818 user manual — Loading the 250or 550-sheet tray
Page 46 · click to enlarge
Page 46

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn, MS817n, MS817dn, MS818dn 46

2 Squeeze and slide the width guide to the correct position for the size of the paper being loaded until it clicks into place.

Lexmark MS818 — Loading the 250or 550-sheet tray diagram (page 46)
Fig. 64 · Loading the 250or 550-sheet tray
Lexmark MS818 — Loading the 250or 550-sheet tray diagram (page 46)
Fig. 65 · Loading the 250or 550-sheet tray
Page 47 of the Lexmark MS818 user manual — Loading the 250or 550-sheet tray
Page 47 · click to enlarge
Page 47

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn, MS817n, MS817dn, MS818dn 47

3 Unlock the length guide, and then squeeze and slide the guide to the correct position for the size of the paper being loaded.

Lexmark MS818 — Loading the 250or 550-sheet tray diagram (page 47)
Fig. 66 · Loading the 250or 550-sheet tray
  • Lock the length guide for all paper sizes.
  • Use the paper size indicators at the bottom of the tray to help position the guides.
Lexmark MS818 — Loading the 250or 550-sheet tray diagram (page 47)
Fig. 67 · Loading the 250or 550-sheet tray
Page 48 of the Lexmark MS818 user manual — Loading the 250or 550-sheet tray
Page 48 · click to enlarge
Page 48

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn, MS817n, MS817dn, MS818dn 48

4 Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface.

Lexmark MS818 — Loading the 250or 550-sheet tray diagram (page 48)
Fig. 68 · Loading the 250or 550-sheet tray

5 Load the paper stack with the printable side facedown.

  • There are different ways of loading letterhead depending on whether an optional staple finisher is installed or not.
Lexmark MS818 — Loading the 250or 550-sheet tray diagram (page 48)
Fig. 69 · Loading the 250or 550-sheet tray

Without an optional staple finisher With an optional staple finisher

  • If you are loading prepunched paper for use with the staple finisher, then make sure the holes on the long edge of the paper are on the right side of the tray.
Lexmark MS818 — Loading the 250or 550-sheet tray diagram (page 48)
Fig. 70 · Loading the 250or 550-sheet tray
Page 49 of the Lexmark MS818 user manual — Loading the 250or 550-sheet tray
Page 49 · click to enlarge
Page 49

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn, MS817n, MS817dn, MS818dn 49

  • Do not slide the paper into the tray. Load paper as shown in the illustration.
Lexmark MS818 — Loading the 250or 550-sheet tray diagram (page 49)
Fig. 71 · Loading the 250or 550-sheet tray
  • If you are loading envelopes, then make sure that the flap side is facing up and the envelopes are on the left side of the tray.
Lexmark MS818 — Loading the 250or 550-sheet tray diagram (page 49)
Fig. 72 · Loading the 250or 550-sheet tray
Page 50 of the Lexmark MS818 user manual — Loading the 250or 550-sheet tray
Page 50 · click to enlarge
Page 50

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn, MS817n, MS817dn, MS818dn 50

  • Make sure the paper is below the solid line, which is the maximum paper fill indicator.
Lexmark MS818 — Loading the 250or 550-sheet tray diagram (page 50)
Fig. 73 · Loading the 250or 550-sheet tray
Page 51 of the Lexmark MS818 user manual — Loading the 250or 550-sheet tray
Page 51 · click to enlarge
Page 51

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn, MS817n, MS817dn, MS818dn 51

  • When using card stock, labels, or other types of specialty media, make sure the paper is below the dashed line, which is the alternate paper fill indicator.
Lexmark MS818 — Loading the 250or 550-sheet tray diagram (page 51)
Fig. 74 · Loading the 250or 550-sheet tray

6 For custom‑ or Universal‑size paper, adjust the paper guides to lightly touch the sides of the stack, and then lock the length guide.

7 Insert the tray.

Lexmark MS818 — Loading the 250or 550-sheet tray diagram (page 51)
Fig. 75 · Loading the 250or 550-sheet tray

8 From the printer control panel, set the paper size and paper type in the Paper menu to match the paper loaded in the tray.

Page 52 of the Lexmark MS818 user manual — Loading the 2100 ‑ sheet tray
Page 52 · click to enlarge
Page 52

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn, MS817n, MS817dn, MS818dn 52

Loading the 2100 ‑ sheet tray

1 Pull out the tray.

2 Adjust the width and length guides.

Loading A5‑size paper

a Pull up and slide the width guide to the position for A5.

Lexmark MS818 — Loading the 2100 ‑ sheet tray diagram (page 52)
Fig. 76 · Loading the 2100 ‑ sheet tray
Lexmark MS818 — Loading the 2100 ‑ sheet tray diagram (page 52)
Fig. 77 · Loading the 2100 ‑ sheet tray
Page 53 of the Lexmark MS818 user manual — Loading the 2100-sheet tray
Page 53 · click to enlarge
Page 53

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn, MS817n, MS817dn, MS818dn 53

b Squeeze and slide the length guide to the position for A5 until it clicks into place.

Lexmark MS818 — Loading the 2100-sheet tray diagram (page 53)
Fig. 78 · Loading the 2100-sheet tray

c Remove the A5 length guide from its holder.

Lexmark MS818 — Loading the 2100-sheet tray diagram (page 53)
Fig. 79 · Loading the 2100-sheet tray
Lexmark MS818 — Loading the 2100-sheet tray diagram (page 53)
Fig. 80 · Loading the 2100-sheet tray

d Insert the A5 length guide into its designated slot.

Page 54 of the Lexmark MS818 user manual — Loading the 2100-sheet tray
Page 54 · click to enlarge
Page 54

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn, MS817n, MS817dn, MS818dn 54

Lexmark MS818 — Loading the 2100-sheet tray diagram (page 54)
Fig. 81 · Loading the 2100-sheet tray
Lexmark MS818 — Loading the 2100-sheet tray diagram (page 54)
Fig. 82 · Loading the 2100-sheet tray

Loading A4‑, letter‑, legal‑, oficio‑, and folio‑size paper

a Pull up and slide the width guide to the correct position for the size of the paper being loaded.

Lexmark MS818 — Loading the 2100-sheet tray diagram (page 54)
Fig. 83 · Loading the 2100-sheet tray
Page 55 of the Lexmark MS818 user manual — Loading the 2100-sheet tray
Page 55 · click to enlarge
Page 55

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn, MS817n, MS817dn, MS818dn 55

b If the A5 length guide is still attached to the length guide, then remove it from its place. If the A5 length

guide is not attached, then proceed to step d.

Lexmark MS818 — Loading the 2100-sheet tray diagram (page 55)
Fig. 84 · Loading the 2100-sheet tray

c Put the A5 length guide in its holder.

Page 56 of the Lexmark MS818 user manual — Loading the 2100-sheet tray
Page 56 · click to enlarge
Page 56

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn, MS817n, MS817dn, MS818dn 56

d Squeeze the length guide and slide it to the correct position for the size of the paper being loaded until

it clicks into place.

Lexmark MS818 — Loading the 2100-sheet tray diagram (page 56)
Fig. 85 · Loading the 2100-sheet tray

3 Flex and fan the sheets to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface.

Lexmark MS818 — Loading the 2100-sheet tray diagram (page 56)
Fig. 86 · Loading the 2100-sheet tray

4 Load the paper stack with the printable side facedown.

  • There are different ways for loading letterhead depending on whether an optional staple finisher is installed or not.
Page 57 of the Lexmark MS818 user manual — Loading the 2100-sheet tray
Page 57 · click to enlarge
Page 57

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn, MS817n, MS817dn, MS818dn 57

Lexmark MS818 — Loading the 2100-sheet tray diagram (page 57)
Fig. 87 · Loading the 2100-sheet tray

Without an optional staple finisher With an optional staple finisher

  • If you are loading prepunched paper for use with the staple finisher, then make sure the holes on the long edge of the paper are on the right side of the tray.
Lexmark MS818 — Loading the 2100-sheet tray diagram (page 57)
Fig. 88 · Loading the 2100-sheet tray
Page 58 of the Lexmark MS818 user manual — Loading the 2100-sheet tray
Page 58 · click to enlarge
Page 58

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn, MS817n, MS817dn, MS818dn 58

  • Make sure the paper is below the maximum paper fill indicator.
Lexmark MS818 — Loading the 2100-sheet tray diagram (page 58)
Fig. 89 · Loading the 2100-sheet tray
Lexmark MS818 — Loading the 2100-sheet tray diagram (page 58)
Fig. 90 · Loading the 2100-sheet tray

5 Insert the tray.

Page 59 of the Lexmark MS818 user manual — B5
Page 59 · click to enlarge
Page 59

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn, MS817n, MS817dn, MS818dn 59

Lexmark MS818 — Loading the multipurpose feeder diagram (page 59)
Fig. 91 · Loading the multipurpose feeder

6 From the printer control panel, set the size and type in the Paper menu to match the paper loaded in the tray.

Loading the multipurpose feeder

1 Pull down the multipurpose feeder door.

Lexmark MS818 — Loading the multipurpose feeder diagram (page 59)
Fig. 92 · Loading the multipurpose feeder

B5

EXEC

A4 A5

LTR

Page 60 of the Lexmark MS818 user manual — LTR
Page 60 · click to enlarge
Page 60

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn, MS817n, MS817dn, MS818dn 60

2 Pull the multipurpose feeder extender.

Lexmark MS818 — Loading the multipurpose feeder diagram (page 60)
Fig. 93 · Loading the multipurpose feeder

A4 A5

LTR

B5

EXEC

3 Slide the width guide to the correct position for the size of the paper being loaded.

Lexmark MS818 — A4 A5 diagram (page 60)
Fig. 94

LTR

A4 A5

EXEC

B5

Page 61 of the Lexmark MS818 user manual — EXEC
Page 61 · click to enlarge
Page 61

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn, MS817n, MS817dn, MS818dn 61

Lexmark MS818 — Loading the multipurpose feeder diagram (page 61)
Fig. 95 · Loading the multipurpose feeder

EXEC

B5

4 Prepare the paper or specialty media for loading. • Flex sheets of paper back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface.

Lexmark MS818 — EXEC diagram (page 61)
Fig. 96
  • Hold transparencies by the edges, and then fan them. Straighten the edges on a level surface.

5 Load paper or specialty media.

  • Load only one size and type of paper or specialty media at a time.
  • Make sure the paper fits loosely in the multipurpose feeder, lies flat, and is not bent or wrinkled.
Page 62 of the Lexmark MS818 user manual — ABC
Page 62 · click to enlarge
Page 62

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn, MS817n, MS817dn, MS818dn 62

  • There are different ways of loading letterhead depending on whether an optional staple finisher is installed or not.

Without an optional staple finisher With an optional staple finisher

Lexmark MS818 — Loading the multipurpose feeder diagram (page 62)
Fig. 97 · Loading the multipurpose feeder

ABC

ABC

One‑sided printing

One‑sided printing

Lexmark MS818 — ABC diagram (page 62)
Fig. 98

ABC

Two‑sided printing

Two‑sided printing

  • If you are loading prepunched paper for use with the staple finisher, then make sure the holes on the long edge of the paper are on the right side of the tray.

One‑sided printing Two‑sided printing

Lexmark MS818 — ABC diagram (page 62)
Fig. 99

ABC

Page 63 of the Lexmark MS818 user manual — A4 A5
Page 63 · click to enlarge
Page 63

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn, MS817n, MS817dn, MS818dn 63

  • Load envelopes with the flap side down and on the left of the multipurpose feeder.
Lexmark MS818 — Loading the multipurpose feeder diagram (page 63)
Fig. 100 · Loading the multipurpose feeder

A4 A5

LTR

B5

EXEC

Lexmark MS818 — A4 A5 diagram (page 63)
Fig. 101
Lexmark MS818 — A4 A5 diagram (page 63)
Fig. 102

6 For custom- or Universal-size paper, adjust the width guides to lightly touch the sides of the stack.

7 From the printer control panel, set the paper size and paper type in the Paper menu to match the paper loaded in the tray.

Page 64 of the Lexmark MS818 user manual — Creating a custom name for a paper type
Page 64 · click to enlarge
Page 64

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn, MS817n, MS817dn, MS818dn 64

Linking and unlinking trays

The printer links trays when the specified paper size and type are the same. When a linked tray becomes empty, paper feeds from the next linked tray. To prevent trays from linking, assign a unique custom paper type name.

Linking and unlinking trays

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer control panel in the TCP/IP section under the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Paper Menu.

  • 3 Change the paper size and type settings for the trays you are linking.
  • To link trays, make sure the paper size and type for the tray match that of the other tray.
  • To unlink trays, make sure the paper size or type for the tray does not match that of the other tray.

4 Click Submit.

Creating a custom name for a paper type

Using the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Paper Menu > Custom Names.

3 Select a custom name, and then type a new custom paper type name.

4 Click Submit.

5 Click Custom Types, and then verify if the new custom paper type name has replaced the custom name.

Page 65 of the Lexmark MS818 user manual — Assigning a custom paper type
Page 65 · click to enlarge
Page 65

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn, MS817n, MS817dn, MS818dn 65

Using the printer control panel

1 From the printer control panel, navigate to:

> Settings > > Paper Menu > > Custom Names

2 Select a custom name, and then type a new custom paper type name.

3 Press .

4 Press Custom Types, and then verify if the new custom paper type name has replaced the custom name.

Assigning a custom paper type

Using the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Paper Menu > Custom Types.

3 Select a custom paper type name, and then select a paper type.

4 Click Submit.

Using the printer control panel

1 From the printer control panel, navigate to:

> Settings > > Paper Menu > > Custom Types

2 Select a custom paper type name, and then select a paper type.

3 Press .

Page 66 of the Lexmark MS818 user manual — Adjusting toner darkness
Page 66 · click to enlarge
Page 66

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn, MS817n, MS817dn, MS818dn 66

Printing

Printing a document

Printing from a computer

1 From the document that you are trying to print, open the Print dialog.

2 If necessary, adjust the settings.

3 Send the print job.

Adjusting toner darkness

Using the Embedded Web Server

1 Open a Web browser, and then type the IP address of the printer in the address field.

  • View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Print Settings > Quality Menu > Toner Darkness.

3 Adjust the toner darkness, and then click Submit.

Using the printer control panel

1 From the printer control panel, navigate to:

> Settings > > Settings > > Print Settings > > Quality Menu > > Toner Darkness

2 Adjust the toner darkness, and then press .

Page 67 of the Lexmark MS818 user manual — Printing from a flash drive
Page 67 · click to enlarge
Page 67

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn, MS817n, MS817dn, MS818dn 67

Printing from a flash drive

Printing from a flash drive

  • Before printing an encrypted PDF file, you will be prompted to enter the file password from the printer control panel.
  • You cannot print files for which you do not have printing permissions.

1 Insert a flash drive into the USB port.

Lexmark MS818 — Printing from a flash drive diagram (page 67)
Fig. 103 · Printing from a flash drive
Lexmark MS818 — Printing from a flash drive diagram (page 67)
Fig. 104 · Printing from a flash drive
  • A flash drive icon appears on the printer control panel and in the held jobs icon when a flash drive is installed.
  • If you insert the flash drive when the printer requires attention, such as when a jam has occurred, then the printer ignores the flash drive.
  • If you insert the flash drive while the printer is processing other print jobs, then Busy appears. After these print jobs are processed, you may need to view the held jobs list to print documents from the flash drive.
Page 68 of the Lexmark MS818 user manual — Supported flash drives and file types
Page 68 · click to enlarge
Page 68

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn, MS817n, MS817dn, MS818dn 68

2 From the printer control panel, select the document you want to print.

3 Press the left or right arrow button to specify the number of copies for printing, and then press .

  • Do not remove the flash drive from the USB port until the document has finished printing.
  • If you leave the flash drive in the printer after leaving the initial USB menu screen, then access held jobs from the printer control panel to print files from the flash drive.

Supported flash drives and file types

  • High ‑ speed USB flash drives must support the full ‑ speed standard. Low-speed USB devices are not supported.
  • USB flash drives must support the File Allocation Table (FAT) system. Devices formatted with New Technology File System (NTFS) or any other file system are not supported.

Recommended flash drives File type

  • Lexar JumpDrive FireFly (512MB and 1GB)
  • SanDisk Cruzer Micro (512MB and 1GB)
  • Sony Micro Vault Classic (512MB and 1GB)

Documents:

  • .pdf
  • .xps

Images:

  • .dcx
  • .gif
  • .jpeg or .jpg
  • .bmp
  • .pcx
  • .tiff or .tif
  • .png
  • .fls
Page 69 of the Lexmark MS818 user manual — Printing from a mobile device using AirPrint
Page 69 · click to enlarge
Page 69

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn, MS817n, MS817dn, MS818dn 69

Printing from a mobile device

  • Make sure that the printer and mobile device share the same wireless network. For more information on configuring the wireless settings of your mobile device, see the documentation that came with the device.
  • Mobile printing is available only in some printer models.

Printing from a mobile device using Mopria Print Service

Mopria® Print Service is a mobile printing solution for mobile devices running on Android version 4.4 or later. It allows you to print directly to any Mopria‑certified printer.

1 From the home screen of your mobile device, launch a compatible application.

2 Tap Print, and then select the printer.

3 Send the print job.

Printing from a mobile device using Google Cloud Print

Google Cloud PrintTM is a mobile printing service that allows enabled applications on mobile devices to print to any Google Cloud Print‑ready printer.

1 From the home screen of your mobile device, launch an enabled application.

2 Tap Print, and then select the printer.

3 Send the print job.

Printing from a mobile device using AirPrint

AirPrint is a mobile printing solution that allows you to print directly from Apple devices to an AirPrint‑certified printer.

  • This application is supported only in some Apple devices.
  • This application is supported only in some printer models.

1 From the home screen of your mobile device, launch a compatible application.

2 Select an item to print, and then tap the share icon.

3 Tap Print, and then select a printer.

4 Print the document.

Page 70 of the Lexmark MS818 user manual — Storing print jobs in the printer
Page 70 · click to enlarge
Page 70

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn, MS817n, MS817dn, MS818dn 70

Printing from a mobile device using Lexmark Mobile Print

Lexmark Mobile Print allows you to send documents and images directly to a supported Lexmark printer.

1 Open the document, and then send or share the document to Lexmark Mobile Print.

2 Select a printer.

3 Print the document.

Printing confidential and other held jobs

Storing print jobs in the printer

1 From the printer control panel, navigate to:

> Settings > > Security > > Confidential Print > select the print job type

Print job type Description

Max Invalid PIN Limits the number of times an invalid PIN can be entered.

Confidential Job Expiration Lets you hold print jobs in the computer until you enter the PIN from the printer control panel.

Repeat Job Expiration Lets you print and store print jobs in the printer memory for reprinting.

Verify Job Expiration Lets you print one copy of a print job while the printer holds the remaining copies. It allows you to examine if the first copy is satisfactory. The print job is automatically deleted from the printer memory once all copies are printed.

Reserve Job Expiration Lets you store print jobs for printing at a later time. The print jobs are held until deleted from the Held Jobs menu.

  • Confidential, Verify, Reserve, and Repeat print jobs may be deleted if the printer requires extra memory to process additional held jobs.
  • You can set the printer to store print jobs in the printer memory until you start the print job from the printer control panel.
  • All print jobs that can be initiated by the user at the printer are called held jobs .

2 Press .

Page 71 of the Lexmark MS818 user manual — Canceling a print job from the printer control panel
Page 71 · click to enlarge
Page 71

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn, MS817n, MS817dn, MS818dn 71

Printing held jobs

1 From the document you are trying to print, open the Print dialog.

  • 2 Select the printer, and then do either of the following:
  • For Windows users, click Properties or Preferences , and then click Print and Hold .
  • For Macintosh users, select Print and Hold .

3 Select the print job type.

4 If necessary, assign a user name.

5 Send the print job.

6 From the printer home screen, select Held Jobs.

7 Send the print job.

Printing information pages

Printing a font sample list

1 From the printer control panel, navigate to:

> Settings > > Reports > > Print Fonts

2 Press the up or down arrow button to select the font setting.

3 Press .

Printing a directory list

From the printer control panel, navigate to:

> Settings > > Reports > > Print Directory >

Canceling a print job

Canceling a print job from the printer control panel

1 From the printer control panel, press .

2 When a list of print jobs appears, select the job to cancel, and then press .

3 Press to go back to the home screen.

Page 72 of the Lexmark MS818 user manual — Configuring supply notifications from the Embedded Web Server
Page 72 · click to enlarge
Page 72

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn, MS817n, MS817dn, MS818dn 72

Canceling a print job from the computer

For Windows users

1 Open the printers folder, and then select your printer.

2 From the print queue, select the print job you want to cancel, and then delete it.

For Macintosh users

1 From System Preferences in the Apple menu, navigate to your printer.

2 From the print queue, select the print job you want to cancel, and then delete it.

Managing your printer

Finding advanced networking and administrator information

This chapter covers basic administrative support tasks using the Embedded Web Server. For more advanced system support tasks, see the Networking Guide on the Software and Documentation CD or the Embedded Web Server — Security: Administrator's Guide on the Lexmark support Web site at http://support.lexmark.com.

Accessing the remote control panel

The remote control panel on your computer screen lets you interact with the printer control panel, even when you are not physically near the network printer. From your computer screen, you can view the printer status and do print-related tasks you might normally do while standing at the network printer.

1 Open a Web browser, and then type the printer IP address in the address field.

  • Print a network setup page or menu settings page, and then locate the IP address in the TCP/IP section. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Press Enter to open the Web page of your printer.

3 Click Applications.

Configuring supply notifications from the Embedded Web Server

You can determine how you would like to be notified when supplies run nearly low, low, very low, or reach their end‑of‑life by setting the selectable alerts.

  • Selectable alerts can be set on the toner cartridge, imaging unit, and maintenance kit.
Page 73 of the Lexmark MS818 user manual — Modifying confidential print settings
Page 73 · click to enlarge
Page 73

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn, MS817n, MS817dn, MS818dn 73

  • All selectable alerts can be set for nearly low, low, and very low supply conditions. Not all selectable alerts can be set for the end ‑ of ‑ life supply condition. E ‑ mail selectable alert is available for all supply conditions.
  • The percentage of estimated remaining supply that prompts the alert can be set on some supplies for some supply conditions.

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Print Settings > Supply Notifications.

3 From the drop‑down menu for each supply, select one of the following notification options:

Off The normal printer behavior for all supplies occurs.

E‑mail Only The printer generates an e‑mail when the supply condition is reached. The status of the supply appears on the menus page and status page.

Continuable Stop1 The printer stops processing jobs when the supply condition is reached, and the user needs to press a button to continue printing.

Non Continuable Stop1,2 The printer stops processing jobs when the supply condition is reached. The supply

must be replaced to continue printing.

1 The printer generates an e-mail about the status of the supply when supply notification is enabled.

2 The printer stops when some supplies become empty to prevent damage.

4 Click Submit.

Modifying confidential print settings

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings tab > Security > Confidential Print Setup.

Notification Description

Page 74 of the Lexmark MS818 user manual — Printing a menu settings page
Page 74 · click to enlarge
Page 74

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn, MS817n, MS817dn, MS818dn 74

  • 3 Modify the settings:
  • Set a maximum number of PIN entry attempts. When a user exceeds a specific number of PIN entry attempts, all of the jobs for that user are deleted.
  • Set an expiration time for confidential print jobs. When a user has not printed the jobs within the specified time, all of the jobs for that user are deleted.

4 Save the modified settings.

Copying printer settings to other printers

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click the Copy Printer Settings.

3 To change the language, select a language from the drop-down menu, and then click Click here to submit language.

4 Click Printer Settings.

5 Type the IP addresses of the source and target printers in their appropriate fields.

6 Click Copy Printer Settings.

Printing a menu settings page

Print a menu settings page to review the current menu settings and to verify if the printer options are installed correctly.

From the printer control panel, navigate to:

> Settings > > Reports > > Menu Settings Page >

Page 75 of the Lexmark MS818 user manual — Saving energy
Page 75 · click to enlarge
Page 75

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn, MS817n, MS817dn, MS818dn 75

Printing a network setup page

If the printer is attached to a network, then print a network setup page to verify the network connection. This page also provides important information that aids network printing configuration.

1 From the printer control panel, navigate to:

> Settings > > Reports > > Network Setup Page >

2 Check the first section of the network setup page, and then confirm that the status is Connected.

If the status is Not Connected, then the LAN drop may not be active, or the network cable may be malfunctioning. Consult your system support person for a solution, and then print another network setup page.

Checking the status of parts and supplies

  • Each gauge shows the estimated life left for the supply or part.
  • All page life estimates for supplies assume printing on a single side of a letter ‑ or A4 ‑ size plain paper.

Checking the status of parts and supplies on the printer control panel

From the printer control panel, navigate to:

> Status/Supplies > View Supplies >

Checking the status of parts and supplies from the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Device Status > More Details.

Saving energy

Using Eco‑Mode

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
Page 76 of the Lexmark MS818 user manual — Reducing printer noise
Page 76 · click to enlarge
Page 76

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn, MS817n, MS817dn, MS818dn 76

  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > General Settings > Eco‑Mode.

3 Select a setting.

Off Use the factory default settings for all settings associated with Eco‑Mode.

  • Settings that were changed when other modes were selected are reset to the factory default settings.
  • Off supports the performance specifications of the printer.

Energy Reduce energy use, especially when the printer is idle.

  • Printer engine motors do not start until a document is ready to print. You may notice a short delay before the first page is printed.
  • The printer enters Sleep mode after one minute of inactivity.
  • The printer display is turned off when the printer is in Sleep mode.
  • Lights on the staple finisher and other optional finishers are turned off when the printer is in Sleep mode.

Energy/Paper Use all the settings associated with Energy and Paper modes.

Plain Paper Enable the automatic two‑sided (duplex) printing feature.

4 Click Submit.

Reducing printer noise

Enable Quiet mode to reduce the printer noise.

1 From the printer control panel, navigate to:

> Settings > > Settings > > General Settings > > Quiet Mode >

2 Select a setting.

Use To

Page 77 of the Lexmark MS818 user manual — Using Hibernate mode
Page 77 · click to enlarge
Page 77

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn, MS817n, MS817dn, MS818dn 77

On Reduce printer noise.

  • Print jobs process at a reduced speed.
  • Printer engine motors do not start until a document is ready to print. There is a short delay before the first page is printed.
  • The alarm control and cartridge alarm sounds are turned off.
  • The printer ignores the Advance Start command.

Off Use factory default settings.

3 Press .

Adjusting Sleep mode

1 From the control panel, navigate to:

> Settings > > Settings > > General Settings > > Timeouts > > Sleep Mode >

2 In the Sleep Mode field, select the number of minutes the printer is idle before it enters Sleep mode.

3 Apply the changes.

Using Hibernate mode

Hibernate is an ultra‑low‑power saving mode.

  • Three days is the default amount of time before the printer enters Hibernate mode.
  • Make sure to wake the printer from Hibernate mode before sending a print job. A hard reset or a long press of the Sleep button wakes the printer from Hibernate mode.
  • If the printer is in Hibernate mode, then the Embedded Web Server is disabled.

1 From the control panel, navigate to:

> Settings > > Settings > > General Settings >

2 Select Press Sleep Button or Press and Hold Sleep Button, and then press .

3 Press Hibernate > .

Use To

Page 78 of the Lexmark MS818 user manual — Statement of Volatility
Page 78 · click to enlarge
Page 78

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn, MS817n, MS817dn, MS818dn 78

Restoring factory default settings

If you want to keep a list of the current menu settings for reference, then print a menu settings page before restoring the factory default settings. For more information, see “Printing a menu settings page” on page 74.

If you want a more comprehensive method of restoring the printer factory default settings, then perform the Wipe All Settings option. For more information, see “Erasing non‑volatile memory” on page 80.

From the printer control panel, navigate to:

> Settings > > Settings > > General Settings > > Factory Defaults > > Restore Now

Securing the printer

Using the security lock feature

The printer is equipped with a security lock feature. When a lock compatible with most laptop computers is attached, the printer is locked. When locked, the controller board shield and the controller board cannot be removed. Attach a security lock to the printer in the location shown.

Lexmark MS818 — Using the security lock feature diagram (page 78)
Fig. 105 · Using the security lock feature
Lexmark MS818 — Using the security lock feature diagram (page 78)
Fig. 106 · Using the security lock feature

Statement of Volatility

Your printer contains various types of memory that can store device and network settings, and user data.

>

Page 79 of the Lexmark MS818 user manual — Erasing volatile memory
Page 79 · click to enlarge
Page 79

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn, MS817n, MS817dn, MS818dn 79

Type of memory Description

Volatile memory Your printer uses standard random access memory (RAM) to temporarily buffer user data during simple print jobs.

Non-volatile memory Your printer may use two forms of non-volatile memory: EEPROM and NAND (flash memory). Both types are used to store the operating system, device settings, network information, bookmark settings, and embedded solutions.

Hard disk memory Some printers have a hard disk drive installed. The printer hard disk is designed for device-specific functionality. This lets the device retain buffered user data from complex print jobs, as well as form data, and font data.

Erase the content of any installed printer memory in the following circumstances:

  • The printer is being decommissioned.
  • The printer hard disk is being replaced.
  • The printer is being moved to a different department or location.
  • The printer is being serviced by someone from outside your organization.
  • The printer is being removed from your premises for service.
  • The printer is being sold to another organization.

Disposing of a printer hard disk

In high‑security environments, it may be necessary to take additional steps to make sure that confidential data stored in the printer hard disk cannot be accessed when the printer—or its hard disk—is removed from your premises.

  • Degaussing —Flushes the hard disk with a magnetic field that erases stored data
  • Crushing —Physically compresses the hard disk to break component parts and render them unreadable
  • Milling —Physically shreds the hard disk into small metal bits

Erasing volatile memory

The volatile memory (RAM) installed in your printer requires a power source to retain information. To erase the buffered data, turn off the printer.

Page 80 of the Lexmark MS818 user manual — Erasing printer hard disk memory
Page 80 · click to enlarge
Page 80

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn, MS817n, MS817dn, MS818dn 80

Erasing non‑volatile memory

Erase individual settings, device and network settings, security settings, and embedded solutions by following these steps:

1 Turn off the printer.

2 Hold down 2 and 6 on the keypad while turning the printer on. Release the buttons only when the screen with the progress bar appears.

The printer performs a power-on sequence, and then the Configuration menu appears. When the printer is fully turned on, a list of functions appears on the printer display.

3 Press the up or down arrow button until Wipe All Settings appears.

The printer will restart several times during this process.

4 Navigate to:

Back > Exit Config Menu

The printer will perform a power‑on reset, and then return to normal operating mode.

Erasing printer hard disk memory

  • Some printer models may not have a printer hard disk installed.
  • Configuring Erase Temporary Data Files in the printer menus lets you remove residual confidential material left by print jobs by securely overwriting files that have been marked for deletion.

Using the printer control panel

1 Turn off the printer.

2 Hold down 2 and 6 while turning the printer on. Release the buttons only when the screen with the progress bar appears.

The printer performs a power-on sequence, and then the Configuration menu appears. When the printer is fully turned on, a list of functions appears on the printer display.

  • 3 Press the up or down arrow button until Wipe Disk appears, and then select one of the following:
  • Wipe disk (fast) —This lets you overwrite the disk with all zeroes in a single pass.
  • Wipe disk (secure) —This lets you overwrite the disk with random bit patterns several times, followed by a verification pass. A secure overwrite is compliant with the DoD 5220.22 ‑ M standard for securely erasing data from a hard disk. Highly confidential information should be wiped using this method.

4 Press the up or down arrow button until Yes appears, and then proceed with disk wiping.

  • A status bar will indicate the progress of the disk wiping task.
Page 81 of the Lexmark MS818 user manual — Configuring printer hard disk encryption
Page 81 · click to enlarge
Page 81

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn, MS817n, MS817dn, MS818dn 81

  • Disk wiping can take from several minutes to more than an hour, during which the printer will be unavailable for other user tasks.

5 Navigate to:

Back > Exit Config Menu

The printer will perform a power‑on reset, and then return to normal operating mode.

Configuring printer hard disk encryption

Enable hard disk encryption to prevent loss of sensitive data in the event the printer or its hard disk is stolen.

Using the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Security > Disk Encryption.

3 From the Disk Encryption menu, select Enable.

  • Enabling disk encryption will erase the content of the printer hard disk.
  • Disk encryption can take from several minutes to more than an hour, during which the printer will be unavailable for other user tasks.

Using the printer control panel

1 Turn off the printer.

2 Hold down 2 and 6 while turning the printer on. Release the buttons only when the screen with the progress bar appears.

The printer performs a power-on sequence, and then the Configuration menu appears. When the printer is fully turned on, a list of functions appears on the printer display.

3 Navigate to:

Disk Encryption > Enable

4 Select Yes to proceed with disk wiping.

  • Do not turn off the printer during the encryption process. Doing so may result in loss of data.
  • Disk encryption can take from several minutes to more than an hour, during which the printer will be unavailable for other user tasks.
Page 82 of the Lexmark MS818 user manual — Finding printer security information
Page 82 · click to enlarge
Page 82

Using MS810n, MS810dn, MS811n, MS811dn, MS812dn, MS817n, MS817dn, MS818dn 82

  • A status bar will indicate the progress of the disk wiping task. After the disk has been encrypted, the printer will return to the screen for enabling or disabling disk encryption.

5 Navigate to:

Back > Exit Config Menu

The printer will perform a power‑on reset, and then return to normal operating mode.

Finding printer security information

In high-security environments, it may be necessary to take additional steps to make sure that confidential data stored in the printer cannot be accessed by unauthorized persons. For more information, visit the Lexmark security Web page.

You can also see the Embedded Web Server — Security: Administrator’s Guide for additional information:

1 Go to www.lexmark.com, and then navigate to Support & Downloads > select your printer.

2 Click the Manuals tab, and then select Embedded Web Server — Security: Administrator’s Guide.

Page 83 of the Lexmark MS818 user manual — Fully configured model
Page 83 · click to enlarge
Page 83

Using MS810de

Learning about the printer

Printer configurations

Basic model

Lexmark MS818 — Basic model diagram (page 83)
Fig. 107 · Basic model
Lexmark MS818 — Basic model diagram (page 83)
Fig. 108 · Basic model

2 Printer control panel

4 Standard 550‑sheet tray (Tray 1)

Fully configured model

Using MS810de 83 · 1 Standard bin · 3 Multipurpose feeder

Page 84 of the Lexmark MS818 user manual — Using MS810de
Page 84 · click to enlarge
Page 84

The following illustration shows the maximum number of optional finishers and trays that are supported by the printer. For more information on other configurations, visit www.lexmark.com/multifunctionprinters.

Lexmark MS818 — Using MS810de diagram (page 84)
Fig. 109 · Using MS810de
Lexmark MS818 — Using MS810de diagram (page 84)
Fig. 110 · Using MS810de

Hardware option Alternative hardware option

  • 1 Staple finisher
  • Output expander
  • 4 ‑ bin mailbox
  • Staple, hole punch finisher
  • 2 4 ‑ bin mailbox
  • Staple finisher
  • Staple, hole punch finisher
  • Output expander

3 Caster base None

4 2100‑sheet tray None

5 550‑sheet tray 250‑sheet tray

6 250‑sheet tray 550‑sheet tray

7 4‑bin mailbox Output expander

8 Output expander 4‑bin mailbox

Using MS810de 84

Page 85 of the Lexmark MS818 user manual — Using the printer control panel
Page 85 · click to enlarge
Page 85

The staple, hole punch finisher must not be combined with any other output options.

  • In a configuration with three optional finishers, the output expander and mailbox may be installed in any order.
  • In a configuration with two optional finishers: – The staple finisher must always be on top. – The high ‑ capacity output expander must always be at the bottom. – The output expander is the only option that can be placed on top of the high ‑ capacity output expander.
  • When using optional trays: – Always use a caster base when the printer is configured with a 2100 ‑ sheet tray. – The 2100 ‑ sheet tray must always be at the bottom of a configuration. – A maximum of four optional trays may be configured with the printer. – The optional 250 ‑ and 550 ‑ sheet trays may be installed in any order.

Using the printer control panel

1 2 3 4

Lexmark MS818 — Using the printer control panel diagram (page 85)
Fig. 111 · Using the printer control panel
Lexmark MS818 — Using the printer control panel diagram (page 85)
Fig. 112 · Using the printer control panel
  • 1 Display
  • View the printer status.
  • Set up and operate the printer.

3 Sleep button Enable Sleep mode or Hibernate mode. Do the following to wake the printer from Sleep Mode:

  • Press any hard button.
  • Pull out Tray 1 or load paper in the multipurpose feeder.
  • Open a door or cover.
  • Send a print job from the computer.
  • Perform a power ‑ on reset with the main power switch.
  • Attach a device to the USB port on the printer.

5 Stop or Cancel button Stop all printer activity.

6 Indicator light Check the status of the printer.

Using MS810de 85

Page 86 of the Lexmark MS818 user manual — Understanding the home screen
Page 86 · click to enlarge
Page 86

7 USB port Connect a flash drive to the printer.

Understanding the colors of the Sleep button and indicator lights

The colors of the Sleep button and indicator lights on the printer control panel signify a certain printer status or condition.

Indicator light Printer status

Off The printer is off or in Hibernate mode.

Blinking green The printer is warming up, processing data, or printing.

Solid green The printer is on, but idle.

Blinking red The printer requires user intervention.

Sleep button light Printer status

Off The printer is off, idle or in Ready state.

Solid amber The printer is in Sleep mode.

Blinking amber The printer is entering or waking from Hibernate mode.

Blinking amber for 0.1 second, then goes completely off for 1.9 seconds in a slow, pulsing pattern

The printer is in Hibernate mode.

Understanding the home screen

When the printer is turned on, the display shows a basic screen, referred to as the home screen. Use the home screen buttons and icons to initiate an action.

1 2 3 4

Lexmark MS818 — Understanding the home screen diagram (page 86)
Fig. 113 · Understanding the home screen

5 6 7 8

Using MS810de 86 · Use the To

Page 87 of the Lexmark MS818 user manual — Features
Page 87 · click to enlarge
Page 87

1 Change Language Change the primary language of the printer.

2 Bookmarks Create, organize, and save a set of bookmarks (URLs) into a tree view of folders and file links.

3 Held Jobs Display all current held jobs.

4 USB View, select, or print photos and documents from a flash drive.

5 Menus Access printer menus.

  • 6 Status message bar
  • Show the current printer status such as Ready or Busy .
  • Show the status of printer supplies.
  • Show intervention messages and the instructions on how to clear them.
  • 7 Status/Supplies
  • Show a printer warning or error message whenever the printer requires intervention to continue processing.
  • View more information on the printer warning or message, and on how to clear it.

8 Tips View a context‑sensitive help information.

These may also appear on the home screen:

Lexmark MS818 — Understanding the colors of the Sleep button and indicator lights diagram (page 87)
Fig. 114 · Understanding the colors of the Sleep button and ind…

Jobs by user Access print jobs saved by user.

Features

Lexmark MS818 — Features diagram (page 87)
Fig. 115 · Features

If an attendance message affects a function, then this icon appears and the red indicator light blinks.

The IP address of your printer is located at the top left corner of the home screen. You can use the IP address when accessing the Embedded Web Server to view and remotely configure printer settings.

Using MS810de 87 · Touch To

Page 88 of the Lexmark MS818 user manual — Using the touch-screen buttons
Page 88 · click to enlarge
Page 88

Using the touch-screen buttons

Lexmark MS818 — Using the touch-screen buttons diagram (page 88)
Fig. 116 · Using the touch-screen buttons

1 Radio button Select or clear an item.

2 Up arrow Scroll up.

3 Down arrow Scroll down.

4 Accept button Save a setting.

  • 5 Cancel button
  • Cancel an action or a selection.
  • Return to the previous screen.

Return to the home screen.

Open a context-sensitive Help dialog on the printer control panel.

Scroll to the left.

Scroll to the right.

Using MS810de 88 · Touch the To · Touch To

Page 89 of the Lexmark MS818 user manual — Accessing the Embedded Web Server
Page 89 · click to enlarge
Page 89

Setting up and using the home screen applications

  • Your home screen may vary depending on your home screen customization settings, administrative setup, and active embedded applications. Some applications are supported only in some printer models.
  • There may be additional solutions and applications available for purchase. For more information, go to <a href="http://www.lexmark.com" rel="nofollow noopener" target="_blank">www.lexmark.com</a> or contact the place where you purchased the printer.

Finding the IP address of the computer

For Windows users

1 In the Run dialog box, type cmd to open the command prompt.

2 Type ipconfig, and then look for the IP address.

For Macintosh users

1 From System Preferences in the Apple menu, select Network.

2 Select your connection type, and then click Advanced > TCP/IP.

3 Look for the IP address.

Finding the IP address of the printer

You can find the printer IP address:

  • From the top left corner of the printer home screen.
  • From the TCP/IP section in the Network/Ports menu.
  • By printing a network setup page or menu settings page, and then finding the TCP/IP section.

Accessing the Embedded Web Server

The Embedded Web Server is the printer Web page that lets you view and remotely configure printer settings even when you are not physically near the printer.

  • 1 Obtain the printer IP address:
  • From the printer control panel home screen
  • From the TCP/IP section in the Network/Ports menu
  • By printing a network setup page or menu settings page, and then finding the TCP/IP section

2 Open a Web browser, and then type the printer IP address in the address field.

3 Press Enter.

Using MS810de 89

Page 90 of the Lexmark MS818 user manual — Using Background and Idle Screen
Page 90 · click to enlarge
Page 90

Customizing the home screen

1 Open a Web browser, and then type the printer IP address in the address field.

2 Do one or more of the following: • Show or hide the icons of basic printer functions. a Click Settings > General Settings > Home screen customization. b Select the check boxes to specify which icons appear on the home screen.

Activating the home screen applications

Finding information about the home screen applications

Your printer comes with preinstalled home screen applications. Before you can use these applications, you must first activate and set up these applications using the Embedded Web Server. For more information on accessing the Embedded Web Server, see “Accessing the Embedded Web Server” on page 89.

For more information on configuring and using the home screen applications, do the following:

1 Go to http://support.lexmark.com.

  • 2 Click Software Solutions , and then select either of the following:
  • Scan to Network —This lets you find information about the Scan to Network application.
  • Other Applications —This lets you find information about the other applications.

3 Click the Manuals tab, and then select the document for the home screen application.

Using Background and Idle Screen

Lexmark MS818 — Using Background and Idle Screen diagram (page 90)
Fig. 117 · Using Background and Idle Screen

The application lets you customize the background and idle screen of your printer home screen.

1 From the home screen, navigate to:

Change Background > select background to use

Using MS810de 90 · Icon Description · 2 Touch

Page 91 of the Lexmark MS818 user manual — Setting up Forms and Favorites
Page 91 · click to enlarge
Page 91

Setting up Forms and Favorites

Lexmark MS818 — Setting up Forms and Favorites diagram (page 91)
Fig. 118 · Setting up Forms and Favorites

Streamline work processes by letting you quickly find and print frequently used online forms directly from the printer home screen.

1 Open a Web browser, and then type the printer IP address in the address field.

2 Click Settings > Apps > Apps Management > Forms and Favorites.

3 Click Add, and then customize the settings.

  • See the mouse-over help beside each field for a description of the setting.
  • To make sure the location settings of the bookmark are correct, type the correct IP address of the host computer where the bookmark is located. For more information on obtaining the IP address of the host computer, see “Finding the IP address of the computer” on page 89 .
  • Make sure the printer has access rights to the folder where the bookmark is located.

4 Click Apply.

To use the application, touch Forms and Favorites on the printer home screen, and then navigate through form categories, or search for forms based on a form number, name, or description.

Understanding Eco‑Settings

Lexmark MS818 — Setting up Forms and Favorites diagram (page 91)
Fig. 119 · Setting up Forms and Favorites

The application lets you easily manage energy consumption, noise, toner, and paper usage settings to help reduce the environmental impact of your printer.

Using MS810de 91 · Use To · Icon Description

Page 92 of the Lexmark MS818 user manual — Setting up Remote Operator Panel
Page 92 · click to enlarge
Page 92

Exporting and importing a configuration

You can export configuration settings into a text file, and then import the file to apply the settings to other printers.

1 Open a Web browser, and then type the printer IP address in the address field.

2 To export or import a configuration for one application, do the following: a Click Settings > Apps > Apps Management. b From the list of installed applications, click the name of the application you want to configure.

c Click Configure, and then do either of the following:

  • To export a configuration to a file, click Export , and then follow the instructions on the computer screen to save the configuration file.

– When saving the configuration file, you can type a unique file name or use the default name. – If a "JVM Out of Memory” error occurs, then repeat the export process until the configuration

file is saved. • To import a configuration from a file, click Import, and then browse to the saved configuration file that was exported from a previously configured printer.

– Before importing the configuration file, you can choose to preview it first or load it directly. – If a timeout occurs and a blank screen appears, then refresh the Web browser, and then click

Apply.

3 To export or import a configuration for multiple applications, do the following: a Click Settings > Import/Export. b Do either of the following:

  • To export a configuration file, click Export Embedded Solutions Settings File , and then follow the instructions on the computer screen to save the configuration file.
  • To import a configuration file, do the following: 1 Click Import Embedded Solutions Settings File > Choose File , and then browse to the saved configuration file that was exported from a previously configured printer. 2 Click Submit .

Setting up Remote Operator Panel

This application enables you to interact with the printer control panel even when you are not physically near the network printer. From your computer, you can view the printer status, release held print jobs, create bookmarks, and do other print-related tasks.

1 Open a Web browser, and then type the printer IP address in the address field.

2 Click Settings > Remote Operator Panel Settings.

Using MS810de 92

Page 93 of the Lexmark MS818 user manual — Loading the 250 ‑ or 550 ‑ sheet tray
Page 93 · click to enlarge
Page 93

3 Select the Enable check box, and then customize the settings.

4 Click Submit.

To use the application, click Remote Operator Panel > Launch VNC Applet.

Loading paper and specialty media

The selection and handling of paper and specialty media can affect how reliably documents print. For more information, see “Avoiding jams” on page 263 and “Storing paper” on page 182.

Setting the paper size and type

From the home screen navigate to:

> Paper Menu > Paper Size/Type > select a tray > select the paper size or type >

Configuring Universal paper settings

The Universal paper size is a user‑defined setting that lets you print on paper sizes that are not preset in the printer menus.

  • The smallest supported Universal size is 70 x 127 mm (2.76 x 5 inches) for one ‑ sided printing and 105 x 148 mm (4.13 x 5.83 inches) for two ‑ sided (duplex) printing.
  • The largest supported Universal size is 216 x 356 mm (8.5 x 14 inches) for one ‑ sided and two ‑ sided printing.
  • When printing on paper less than 210 mm (8.3 inches) wide, the printer may print at a reduced speed after a period of time to ensure the best print performance.
  • If you regularly print large jobs on narrow paper, then you may use the MS710 Series printer models, which print batches of 10 or more pages of narrow paper at a faster speed. For more information on the MS710 Series printer models, contact your Lexmark sales representative.

1 From the home screen, navigate to:

> Paper Menu > Universal Setup > Units of Measure > select a unit of measure

2 Touch Portrait Width or Portrait Height.

3 Select the width or height, and then touch

Loading the 250 ‑ or 550 ‑ sheet tray

1 Pull out the tray.

  • When loading folio ‑ , legal ‑ , or Oficio ‑ size paper, lift the tray slightly and pull it out completely.

Using MS810de 93

Page 94 of the Lexmark MS818 user manual — Loading paper and specialty media
Page 94 · click to enlarge
Page 94
  • Do not remove trays while a job prints or while Busy appears on the display. Doing so may cause a jam.
Lexmark MS818 — Loading paper and specialty media diagram (page 94)
Fig. 120 · Loading paper and specialty media

2 Squeeze and slide the width guide to the correct position for the size of the paper being loaded until it clicks into place.

Lexmark MS818 — Loading paper and specialty media diagram (page 94)
Fig. 121 · Loading paper and specialty media

Using MS810de 94

Page 95 of the Lexmark MS818 user manual — Loading paper and specialty media
Page 95 · click to enlarge
Page 95
Lexmark MS818 — Loading paper and specialty media diagram (page 95)
Fig. 122 · Loading paper and specialty media

3 Unlock the length guide, and then squeeze and slide the guide to the correct position for the size of the paper being loaded.

Lexmark MS818 — Loading paper and specialty media diagram (page 95)
Fig. 123 · Loading paper and specialty media
  • Lock the length guide for all paper sizes.
  • Use the paper size indicators at the bottom of the tray to help position the guides.

Using MS810de 95

Page 96 of the Lexmark MS818 user manual — Loading paper and specialty media
Page 96 · click to enlarge
Page 96
Lexmark MS818 — Loading paper and specialty media diagram (page 96)
Fig. 124 · Loading paper and specialty media

4 Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface.

Lexmark MS818 — Loading paper and specialty media diagram (page 96)
Fig. 125 · Loading paper and specialty media

5 Load the paper stack with the printable side facedown.

  • There are different ways of loading letterhead depending on whether an optional staple finisher is installed or not.
Lexmark MS818 — Loading paper and specialty media diagram (page 96)
Fig. 126 · Loading paper and specialty media

Without an optional staple finisher With an optional staple finisher

Using MS810de 96

Page 97 of the Lexmark MS818 user manual — Loading paper and specialty media
Page 97 · click to enlarge
Page 97
Lexmark MS818 — Loading paper and specialty media diagram (page 97)
Fig. 127 · Loading paper and specialty media

Without an optional staple finisher With an optional staple finisher

  • If you are loading prepunched paper for use with the staple finisher, then make sure the holes on the long edge of the paper are on the right side of the tray.
Lexmark MS818 — Loading paper and specialty media diagram (page 97)
Fig. 128 · Loading paper and specialty media
Lexmark MS818 — Loading paper and specialty media diagram (page 97)
Fig. 129 · Loading paper and specialty media

Using MS810de 97

Page 98 of the Lexmark MS818 user manual — Loading paper and specialty media
Page 98 · click to enlarge
Page 98
  • If you are loading envelopes, then make sure that the flap side is facing up and the envelopes are on the left side of the tray.
  • Make sure the paper is below the solid line, which is the maximum paper fill indicator.
Lexmark MS818 — Loading paper and specialty media diagram (page 98)
Fig. 130 · Loading paper and specialty media

Using MS810de 98

Page 99 of the Lexmark MS818 user manual — Loading paper and specialty media
Page 99 · click to enlarge
Page 99
  • When using card stock, labels, or other types of specialty media, make sure the paper is below the dashed line, which is the alternate paper fill indicator.
Lexmark MS818 — Loading paper and specialty media diagram (page 99)
Fig. 131 · Loading paper and specialty media

6 For custom‑ or Universal‑size paper, adjust the paper guides to lightly touch the sides of the stack, and then lock the length guide.

7 Insert the tray.

8 From the printer control panel, set the paper size and paper type in the Paper menu to match the paper loaded in the tray.

Using MS810de 99

Page 100 of the Lexmark MS818 user manual — Loading the 2100 ‑ sheet tray
Page 100 · click to enlarge
Page 100

Loading the 2100 ‑ sheet tray

1 Pull out the tray.

2 Adjust the width and length guides.

Loading A5‑size paper

a Pull up and slide the width guide to the position for A5.

Lexmark MS818 — Loading the 2100 ‑ sheet tray diagram (page 100)
Fig. 132 · Loading the 2100 ‑ sheet tray

Using MS810de 100

Page 101 of the Lexmark MS818 user manual — Loading the 2100-sheet tray
Page 101 · click to enlarge
Page 101

b Squeeze and slide the length guide to the position for A5 until it clicks into place.

Lexmark MS818 — Loading the 2100-sheet tray diagram (page 101)
Fig. 133 · Loading the 2100-sheet tray

c Remove the A5 length guide from its holder.

d Insert the A5 length guide into its designated slot.

Using MS810de 101

Page 102 of the Lexmark MS818 user manual — Loading the 2100-sheet tray
Page 102 · click to enlarge
Page 102

Loading A4‑, letter‑, legal‑, Oficio‑, and Folio‑size paper

a Pull up and slide the width guide to the correct position for the size of the paper being loaded.

Lexmark MS818 — Loading the 2100-sheet tray diagram (page 102)
Fig. 134 · Loading the 2100-sheet tray

Using MS810de 102

Page 103 of the Lexmark MS818 user manual — Loading the 2100-sheet tray
Page 103 · click to enlarge
Page 103

b If the A5 length guide is still attached to the length guide, then remove it from its place. If the A5 length

guide is not attached, then proceed to step d.

c Put the A5 length guide in its holder.

Using MS810de 103

Page 104 of the Lexmark MS818 user manual — Loading the 2100-sheet tray
Page 104 · click to enlarge
Page 104

d Squeeze the length guide and slide it to the correct position for the size of the paper being loaded until

it clicks into place.

Lexmark MS818 — Loading the 2100-sheet tray diagram (page 104)
Fig. 135 · Loading the 2100-sheet tray

3 Flex sheets of paper back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface.

Lexmark MS818 — Loading the 2100-sheet tray diagram (page 104)
Fig. 136 · Loading the 2100-sheet tray

4 Load the paper stack with the printable side facedown.

  • There are different ways of loading letterhead depending on whether an optional staple finisher is installed or not.

Using MS810de 104

Page 105 of the Lexmark MS818 user manual — Loading the 2100-sheet tray
Page 105 · click to enlarge
Page 105
Lexmark MS818 — Loading the 2100-sheet tray diagram (page 105)
Fig. 137 · Loading the 2100-sheet tray

Without an optional staple finisher With an optional staple finisher

  • If you are loading prepunched paper for use with the staple finisher, then make sure the holes on the long edge of the paper are on the right side of the tray.
Lexmark MS818 — Loading the 2100-sheet tray diagram (page 105)
Fig. 138 · Loading the 2100-sheet tray

Using MS810de 105

Page 106 of the Lexmark MS818 user manual — Loading the 2100-sheet tray
Page 106 · click to enlarge
Page 106
  • Make sure the paper is below the maximum paper fill indicator.

5 Insert the tray.

Using MS810de 106

Page 107 of the Lexmark MS818 user manual — A4 A5
Page 107 · click to enlarge
Page 107

6 From the printer control panel, set the paper size and type in the Paper menu to match the paper loaded in the tray.

Loading the multipurpose feeder

1 Pull down the multipurpose feeder door.

Lexmark MS818 — Loading the multipurpose feeder diagram (page 107)
Fig. 139 · Loading the multipurpose feeder

A4 A5

LTR

B5

EXEC

Using MS810de 107

Page 108 of the Lexmark MS818 user manual — LTR
Page 108 · click to enlarge
Page 108

2 Pull the multipurpose feeder extender.

A4 A5

LTR

B5

EXEC

3 Slide the width guide to the correct position for the size of the paper being loaded.

LTR

A4 A5

EXEC

B5

Using MS810de 108

Page 109 of the Lexmark MS818 user manual — EXEC
Page 109 · click to enlarge
Page 109
Lexmark MS818 — Loading the multipurpose feeder diagram (page 109)
Fig. 140 · Loading the multipurpose feeder

EXEC

B5

4 Prepare the paper or specialty media for loading. • Flex sheets of paper back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface.

Lexmark MS818 — EXEC diagram (page 109)
Fig. 141
  • Hold transparencies by the edges, and then fan them. Straighten the edges on a level surface.

5 Load the paper or specialty media.

  • Load only one size and type of paper or specialty media at a time.
  • Make sure the paper fits loosely in the multipurpose feeder, lies flat, and is not bent or wrinkled.

Using MS810de 109

Page 110 of the Lexmark MS818 user manual — ABC
Page 110 · click to enlarge
Page 110
  • There are different ways of loading letterhead depending on whether an optional staple finisher is installed or not.

Without an optional staple finisher With an optional staple finisher

ABC

ABC

One‑sided printing

One‑sided printing

ABC

Two‑sided printing

Two‑sided printing

  • If you are loading prepunched paper for use with the staple finisher, then make sure the holes on the long edge of the paper are on the right side of the tray.

One‑sided printing Two‑sided printing

ABC

Using MS810de 110

Page 111 of the Lexmark MS818 user manual — A4 A5
Page 111 · click to enlarge
Page 111
  • Load envelopes with the flap side down and on the left of the multipurpose feeder.

A4 A5

LTR

B5

EXEC

6 For custom- or Universal-size paper, adjust the width guides to lightly touch the sides of the stack.

7 From the Paper menu on the printer control panel, set the paper size and type in the Paper menu to match the paper loaded in the tray.

Using MS810de 111

Page 112 of the Lexmark MS818 user manual — Creating a custom name for a paper type
Page 112 · click to enlarge
Page 112

Linking and unlinking trays

Linking and unlinking trays

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Paper Menu.

  • 3 Change the paper size and type settings for the trays you are linking.
  • To link trays, make sure the paper size and type for the tray match that of the other tray.
  • To unlink trays, make sure the paper size or type for the tray does not match that of the other tray.

4 Click Submit.

Creating a custom name for a paper type

Using the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Paper Menu > Custom Names.

3 Select a custom name, and then type a custom paper type name.

4 Click Submit.

5 Click Custom Types, and then verify if the new custom paper type name has replaced the custom name.

Using the printer control panel

1 From the home screen, navigate to:

> Paper Menu > Custom Names

2 Select a custom name, and then type a custom paper type name.

Using MS810de 112

Page 113 of the Lexmark MS818 user manual — Printing from a computer
Page 113 · click to enlarge
Page 113

4 Touch Custom Types, and then verify that the new custom paper type name has replaced the custom name.

Assigning a custom paper type

Using the Embedded Web Server

Assign a custom paper type name to a tray when linking or unlinking trays.

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Paper Menu > Custom Types.

3 Select a custom paper type name, and then select a paper type

4 Click Submit.

Using the printer control panel

1 From the home screen, navigate to:

> Paper Menu > Custom Types

2 Select a custom paper type name, and then select a paper type

Printing

Printing a document

Printing from a computer

1 From the document that you are trying to print, open the Print dialog.

2 If necessary, adjust the settings.

3 Print the document.

Using MS810de 113 · 3 Touch · 3 Touch

Page 114 of the Lexmark MS818 user manual — Adjusting toner darkness
Page 114 · click to enlarge
Page 114

Printing forms

1 From the home screen, navigate to:

Forms and Favorites > select form > Print

2 If necessary, configure the print settings.

3 Send the print job.

Adjusting toner darkness

Using the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Print Settings > Quality Menu > Toner Darkness.

3 Adjust the setting, and then click Submit.

Using the printer control panel

1 From the home screen, navigate to:

> Settings > Print Settings > Quality Menu > Toner Darkness

2 Adjust the setting, and then touch

Using MS810de 114

Page 115 of the Lexmark MS818 user manual — Printing from a flash drive
Page 115 · click to enlarge
Page 115

Printing from a flash drive

Printing from a flash drive

  • Before printing an encrypted PDF file, you will be prompted to type the file password from the printer control panel.
  • You cannot print files for which you do not have printing permissions.

1 Insert a flash drive into the USB port.

Lexmark MS818 — Printing from a flash drive diagram (page 115)
Fig. 142 · Printing from a flash drive
  • A flash drive icon appears on the printer home screen when a flash drive is inserted.
  • If you insert the flash drive when the printer requires attention, such as when a jam has occurred, then the printer ignores the flash drive.
  • If you insert the flash drive while the printer is processing other print jobs, then Busy appears. After these print jobs are processed, you may need to view the held jobs list to print documents from the flash drive.

Using MS810de 115

Page 116 of the Lexmark MS818 user manual — Supported flash drives and file types
Page 116 · click to enlarge
Page 116

2 From the printer control panel, touch the document you want to print.

3 Touch the arrows to specify the number of copies for printing, and then touch Print.

  • Do not remove the flash drive from the USB port until the document has finished printing.
  • If you leave the flash drive in the printer after leaving the initial USB menu screen, then touch Held Jobs on the home screen to print files from the flash drive.

Supported flash drives and file types

  • High ‑ speed USB flash drives must support the full ‑ speed standard. Low-speed USB devices are not supported.
  • USB flash drives must support the File Allocation Table (FAT) system. Devices formatted with New Technology File System (NTFS) or any other file system are not supported.

Recommended flash drives File type

  • Lexar JumpDrive FireFly (512MB and 1GB)
  • SanDisk Cruzer Micro (512MB and 1GB)
  • Sony Micro Vault Classic (512MB and 1GB)

Documents:

  • .pdf
  • .xps

Images:

  • .dcx
  • .gif
  • .jpeg or .jpg
  • .bmp
  • .pcx
  • .tiff or .tif
  • .png
  • .fls

Using MS810de 116

Page 117 of the Lexmark MS818 user manual — Printing from a mobile device using Lexmark Print
Page 117 · click to enlarge
Page 117

Printing from a mobile device

Printing from a mobile device using Mopria Print Service

Mopria® Print Service is a mobile printing solution for mobile devices running on Android version 4.4 or later. It allows you to print directly to any Mopria‑certified printer.

1 From the home screen of your mobile device, launch a compatible application.

2 Tap Print, and then select the printer.

3 Send the print job.

Printing from a mobile device using Google Cloud Print

Google Cloud Print is a mobile printing service that allows enabled applications on mobile devices to print to any Google Cloud Print‑ready printer.

1 From the home screen of your mobile device, launch an enabled application.

2 Tap Print, and then select the printer.

3 Send the print job.

Printing from a mobile device using AirPrint

AirPrint is a mobile printing solution that allows you to print directly from Apple devices to an AirPrint‑certified printer.

1 From the home screen of your mobile device, launch a compatible application.

2 Select an item to print, and then tap the share icon.

3 Tap Print, and then select the printer.

4 Send the print job.

Printing from a mobile device using Lexmark Print

Lexmark Print allows you to send documents and images directly to a Lexmark device.

1 Open the document, and then send or share the document to Lexmark Print.

2 Select a device.

3 Print the document.

Using MS810de 117

Page 118 of the Lexmark MS818 user manual — Printing held jobs
Page 118 · click to enlarge
Page 118

Printing confidential and other held jobs

Storing print jobs in the printer

1 From the home screen, navigate to:

> Security > Confidential Print > select a print job type

Max Invalid PIN Limit the number of times an invalid PIN can be entered.

Confidential Job Expiration Hold print jobs in the computer until you enter the PIN from the printer control panel.

Repeat Job Expiration Print and store print jobs in the printer memory.

Verify Job Expiration Print one copy of a print job and hold the remaining copies. It lets you examine if the first copy is satisfactory or not. The print job is automatically deleted from the printer memory when all copies are printed.

Reserve Job Expiration Store print jobs for printing at a later time.

  • Confidential, Verify, Reserve, and Repeat print jobs may be deleted if the printer requires extra memory to process additional held jobs.
  • You can set the printer to store print jobs in the printer memory until you start the print job from the printer control panel.
  • All print jobs that can be initiated by the user at the printer are called held jobs .

Printing held jobs

1 From the document that you are trying to print, open the Print dialog.

  • 2 Select the printer, and then do either of the following:
  • For Windows users, click Properties or Preferences , and then click Print and Hold .
  • For Macintosh users, select Print and Hold .

3 Select the print job type.

4 If necessary, assign a user name.

5 Send the print job.

6 From the printer home screen, touch Held Jobs.

7 Send the print job.

Using MS810de 118 · Use To · 2 Touch

Page 119 of the Lexmark MS818 user manual — For Macintosh users
Page 119 · click to enlarge
Page 119

Printing information pages

Printing a font sample list

1 From the home screen, navigate to:

> Reports > Print Fonts

2 Touch PCL Fonts or PostScript Fonts.

Printing a directory list

A directory list shows the resources stored in a flash memory or in the printer hard disk.

From the home screen, navigate to:

> Reports > Print Directory

Canceling a print job

Canceling a print job from the printer control panel

1 From the home screen, touch Cancel Jobs, or press on the keypad.

2 Touch the job you want to cancel, and then touch

3 Press on the keypad to return to the home screen.

Canceling a print job from the computer

For Windows users

1 Open the printers folder, and then select your printer.

2 From the print queue, select the print job you want to cancel, and then delete it.

For Macintosh users

1 From System Preferences in the Apple menu, navigate to your printer.

2 From the print queue, select the print job you want to cancel, and then delete it.

Using MS810de 119

Page 120 of the Lexmark MS818 user manual — Configuring supply notifications from the Embedded Web Server
Page 120 · click to enlarge
Page 120

Managing your printer

Finding advanced networking and administrator information

This chapter covers basic administrative support tasks using the Embedded Web Server. For more advanced system support tasks, see the Networking Guide on the Software and Documentation CD or the Embedded Web Server — Security: Administrator's Guide on the Lexmark support Web site at http://support.lexmark.com.

Checking the virtual display

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Check the virtual display that appears at the top left corner of the screen.

The virtual display works as an actual display would work on a printer control panel.

Configuring supply notifications from the Embedded Web Server

You can determine how you would like to be notified when supplies run nearly low, low, very low, or reach their end‑of‑life by setting the selectable alerts.

  • Selectable alerts can be set on the toner cartridge, imaging unit, and maintenance kit.
  • All selectable alerts can be set for nearly low, low, and very low supply conditions. Not all selectable alerts can be set for the end ‑ of ‑ life supply condition. E ‑ mail selectable alert is available for all supply conditions.
  • The percentage of estimated remaining supply that prompts the alert can be set on some supplies for some supply conditions.

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Print Settings > Supply Notifications.

3 From the drop‑down menu for each supply, select one of the following notification options:

Off The normal printer behavior for all supplies occurs.

E‑mail Only The printer generates an e‑mail when the supply condition is reached. The status of the supply appears on the menus page and status page.

Using MS810de 120 · Notification Description

Page 121 of the Lexmark MS818 user manual — Copying printer settings to other printers
Page 121 · click to enlarge
Page 121

Continuable Stop1 The printer stops processing jobs when the supply condition is reached, and the user needs to press a button to continue printing.

Non Continuable Stop1,2 The printer stops processing jobs when the supply condition is reached. The supply

must be replaced to continue printing.

1 The printer generates an e-mail about the status of the supply when supply notification is enabled.

2 The printer stops when some supplies become empty to prevent damage.

4 Click Submit.

Modifying confidential print settings

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Security > Confidential Print Setup.

  • 3 Modify the settings:
  • Set a maximum number of PIN entry attempts. When a user exceeds that number, all of the jobs for that user are deleted.
  • Set an expiration time for confidential print jobs. When a user has not printed the jobs within that time, all of the jobs for that user are deleted.

4 Click Submit to save the modified settings.

Copying printer settings to other printers

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Copy Printer Settings.

3 To change the language, select a language from the drop‑down menu, and then click Click here to submit language.

4 Click Printer Settings.

Using MS810de 121 · Notification Description

Page 122 of the Lexmark MS818 user manual — Checking the status of parts and supplies from the Embedded Web Server
Page 122 · click to enlarge
Page 122

5 Type the IP addresses of the source and target printers.

6 Click Copy Printer Settings.

Printing a menu settings page

From the home screen, navigate to:

> Reports > Menu Settings Page

Printing a network setup page

If the printer is attached to a network, then print a network setup page to verify the network connection. This page also provides important information that aids network printing configuration.

1 From the home screen, navigate to:

> Reports > Network Setup Page

2 Check the first section of the network setup page and confirm that the status is Connected.

If the status is Not Connected, then the LAN drop may not be active, or the network cable may be malfunctioning. Consult your system support person for a solution, and then print another network setup page.

Checking the status of parts and supplies

  • Each gauge shows the estimated life left for the supply or part.
  • All page life estimates for supplies assume printing on a single side of a letter ‑ or A4 ‑ size plain paper.

Checking the status of parts and supplies on the printer control panel

From the home screen, touch Status/Supplies > View Supplies.

Checking the status of parts and supplies from the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Device Status > More Details.

Using MS810de 122

Page 123 of the Lexmark MS818 user manual — Reducing printer noise
Page 123 · click to enlarge
Page 123

Saving energy

Using Eco‑Mode

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > General Settings > Eco‑Mode.

3 Select a setting.

Off Use the factory default settings for all settings associated with Eco‑Mode.

  • Settings that were changed when other modes were selected are reset to the factory default settings.
  • Off supports the performance specifications of the printer.

Energy Reduce energy use, especially when the printer is idle.

  • Printer engine motors do not start until a document is ready to print. You may notice a short delay before the first page is printed.
  • The printer enters Sleep mode after one minute of inactivity.
  • The printer display is turned off when the printer is in Sleep mode.
  • Lights on the staple finisher and other optional finishers are turned off when the printer is in Sleep mode.

Energy/Paper Use all the settings associated with Energy and Paper modes.

Plain Paper Enable the automatic two‑sided (duplex) printing feature.

4 Click Submit.

Reducing printer noise

Enable Quiet mode to reduce printer noise.

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > General Settings > Quiet Mode.

3 Select a setting.

Using MS810de 123 · Use To

Page 124 of the Lexmark MS818 user manual — Restoring factory default settings
Page 124 · click to enlarge
Page 124

On Reduce printer noise.

  • Print jobs process at a reduced speed.
  • Printer engine motors do not start until a document is ready to print. There is a short delay before the first page is printed.
  • The alarm control and cartridge alarm sounds are turned off.
  • The printer ignores the Advance Start command.

Off Use factory default settings.

4 Click Submit.

Adjusting Sleep mode

1 From the home screen, navigate to:

> Settings > General Settings > Timeouts > Sleep Mode

2 In the Sleep Mode field, select the number of minutes the printer is idle before it enters Sleep mode.

3 Apply the changes.

Using Hibernate mode

Hibernate is an ultra‑low‑power saving mode.

  • Three days is the default amount of time before the printer enters Hibernate mode.
  • Make sure to wake the printer from Hibernate mode before sending a print job. A hard reset or a long press of the Sleep button wakes the printer from Hibernate mode.
  • If the printer is in Hibernate mode, then the Embedded Web Server is disabled.

1 From the home screen, navigate to:

> Settings > General Settings

2 Touch Press Sleep Button or Press and Hold Sleep Button.

3 Touch Hibernate >

Restoring factory default settings

If you want to keep a list of the current menu settings for reference, then print a menu settings page before restoring the factory default settings. For more information, see “Printing a menu settings page” on page 122.

Using MS810de 124 · Use To

Page 125 of the Lexmark MS818 user manual — Statement of Volatility
Page 125 · click to enlarge
Page 125

If you want a more comprehensive method of restoring the printer factory default settings, then perform the Wipe All Settings option. For more information, see “Erasing non‑volatile memory” on page 127.

From the home screen, navigate to:

> Settings > General Settings > Factory Defaults > Restore Now >

Securing the printer

Using the security lock feature

The printer is equipped with a security lock feature. When a lock compatible with most laptop computers is attached, the printer is locked. When locked, the controller board shield and the controller board cannot be removed. Attach a security lock to the printer in the location shown.

Statement of Volatility

Your printer contains various types of memory that can store device and network settings, and user data.

Using MS810de 125

Page 126 of the Lexmark MS818 user manual — Erasing volatile memory
Page 126 · click to enlarge
Page 126

Type of memory Description

Volatile memory Your printer uses standard random access memory (RAM) to temporarily buffer user data during simple print jobs.

Non-volatile memory Your printer may use two forms of non-volatile memory: EEPROM and NAND (flash memory). Both types are used to store the operating system, device settings, network information, bookmark settings, and embedded solutions.

Hard disk memory Some printers have a hard disk drive installed. The printer hard disk is designed for device-specific functionality. This lets the device retain buffered user data from complex print jobs, as well as form data, and font data.

Erase the content of any installed printer memory in the following circumstances:

  • The printer is being decommissioned.
  • The printer hard disk is being replaced.
  • The printer is being moved to a different department or location.
  • The printer is being serviced by someone from outside your organization.
  • The printer is being removed from your premises for service.
  • The printer is being sold to another organization.

Disposing of a printer hard disk

In high‑security environments, it may be necessary to take additional steps to make sure that confidential data stored in the printer hard disk cannot be accessed when the printer—or its hard disk—is removed from your premises.

  • Degaussing —Flushes the hard disk with a magnetic field that erases stored data
  • Crushing —Physically compresses the hard disk to break component parts and render them unreadable
  • Milling —Physically shreds the hard disk into small metal bits

Erasing volatile memory

The volatile memory (RAM) installed in your printer requires a power source to retain information. To erase the buffered data, simply turn off the printer.

Using MS810de 126

Page 127 of the Lexmark MS818 user manual — Erasing printer hard disk memory
Page 127 · click to enlarge
Page 127

Erasing non‑volatile memory

Erase individual settings, device and network settings, security settings, and embedded solutions by following these steps:

1 Turn off the printer.

2 Hold down 2 and 6 on the keypad while turning the printer on. Release the buttons only when the screen with the progress bar appears.

The printer performs a power-on sequence, and then the Configuration menu appears. When the printer is fully turned on, a list of functions appears on the printer display instead of the standard home screen icons.

3 Touch Wipe All Settings.

The printer will restart several times during this process.

4 Touch Back > Exit Config Menu.

The printer will perform a power‑on reset, and then return to normal operating mode.

Erasing printer hard disk memory

  • Some printer models may not have a printer hard disk installed.
  • Configuring Erase Temporary Data Files in the printer menus lets you remove residual confidential material left by print jobs by securely overwriting files that have been marked for deletion.

Using the printer control panel

1 Turn off the printer.

2 Hold down 2 and 6 while turning the printer on. Release the buttons only when the screen with the progress bar appears.

The printer performs a power-on sequence, and then the Configuration menu appears. When the printer is fully turned on, the touch screen displays a list of functions.

  • 3 Touch Wipe Disk , and then touch one of the following:
  • Wipe disk (fast) —This lets you overwrite the disk with all zeroes in a single pass.
  • Wipe disk (secure) —This lets you overwrite the disk with random bit patterns several times, followed by a verification pass. A secure overwrite is compliant with the DoD 5220.22 ‑ M standard for securely erasing data from a hard disk. Highly confidential information should be wiped using this method.

4 Touch Yes to proceed with disk wiping.

  • A status bar will indicate the progress of the disk wiping task.
  • Disk wiping can take from several minutes to more than an hour, during which the printer will be unavailable for other user tasks.

5 Touch Back > Exit Config Menu.

The printer will perform a power‑on reset, and then return to normal operating mode.

Using MS810de 127

Page 128 of the Lexmark MS818 user manual — Configuring printer hard disk encryption
Page 128 · click to enlarge
Page 128

Configuring printer hard disk encryption

Enable hard disk encryption to prevent loss of sensitive data in the event the printer or its hard disk is stolen.

Using the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Security > Disk Encryption.

3 From the Disk encryption menu, select Enable.

  • Enabling disk encryption will erase the contents of the printer hard disk.
  • Disk encryption can take from several minutes to more than an hour, during which the printer will be unavailable for other user tasks.

4 Click Submit.

Using the printer control panel

1 Turn off the printer.

2 Hold down 2 and 6 while turning the printer on. Release the buttons only when the screen with the progress bar appears.

The printer performs a power-on sequence, and then the Configuration menu appears. When the printer is fully turned on, a list of functions appears on the printer display.

3 Touch Disk Encryption > Enable.

4 Touch Yes to proceed with disk wiping.

  • Do not turn off the printer during the encryption process. Doing so may result in loss of data.
  • Disk encryption can take from several minutes to more than an hour, during which the printer will be unavailable for other user tasks.
  • A status bar will indicate the progress of the disk wiping task. After the disk has been encrypted, the printer will return to the Enable/Disable screen.

5 Touch Back > Exit Config Menu.

The printer will perform a power‑on reset, and then return to normal operating mode.

Using MS810de 128

Page 129 of the Lexmark MS818 user manual — Finding printer security information
Page 129 · click to enlarge
Page 129

Finding printer security information

In high-security environments, it may be necessary to take additional steps to make sure that confidential data stored in the printer cannot be accessed by unauthorized persons. For more information, visit the Lexmark security Web page.

You can also see the Embedded Web Server — Security: Administrator’s Guide for additional information:

1 Go to www.lexmark.com, and then navigate to Support & Downloads > select your printer.

2 Click the Manuals tab, and then select Embedded Web Server — Security: Administrator’s Guide.

Using MS810de 129

Page 130 of the Lexmark MS818 user manual — Fully configured model
Page 130 · click to enlarge
Page 130

Using MS812de

Learning about the printer

Printer configurations

Basic model

Lexmark MS818 — Basic model diagram (page 130)
Fig. 143 · Basic model
Lexmark MS818 — Basic model diagram (page 130)
Fig. 144 · Basic model

2 Printer control panel

4 Standard 550‑sheet tray (Tray 1)

Fully configured model

Using MS812de 130 · 1 Standard bin · 3 Multipurpose feeder

Page 131 of the Lexmark MS818 user manual — Using MS812de
Page 131 · click to enlarge
Page 131

The following illustration shows the maximum number of optional finishers and trays that are supported by the printer. For more information on other configurations, visit www.lexmark.com/multifunctionprinters.

Lexmark MS818 — Using MS812de diagram (page 131)
Fig. 145 · Using MS812de
Lexmark MS818 — Using MS812de diagram (page 131)
Fig. 146 · Using MS812de

Hardware option Alternative hardware option

  • 1 Staple finisher
  • Output expander
  • 4 ‑ bin mailbox
  • Staple, hole punch finisher
  • 2 4 ‑ bin mailbox
  • Staple finisher
  • Staple, hole punch finisher
  • Output expander

3 Caster base None

4 2100‑sheet tray None

5 550‑sheet tray 250‑sheet tray

6 250‑sheet tray 550‑sheet tray

7 4‑bin mailbox Output expander

8 Output expander 4‑bin mailbox

Using MS812de 131

Page 132 of the Lexmark MS818 user manual — Using the printer control panel
Page 132 · click to enlarge
Page 132

The staple, hole punch finisher must not be combined with any other output options.

  • In a configuration with three optional finishers, the output expander and mailbox may be installed in any order.
  • In a configuration with two optional finishers: – The staple finisher must always be on top. – The high ‑ capacity output expander must always be at the bottom. – The output expander is the only option that can be placed on top of the high ‑ capacity output expander.
  • When using optional trays: – Always use a caster base when the printer is configured with a 2100 ‑ sheet tray. – The 2100 ‑ sheet tray must always be at the bottom of a configuration. – A maximum of four optional trays may be configured with the printer. – The optional 250 ‑ and 550 ‑ sheet trays may be installed in any order.

Using the printer control panel

Lexmark MS818 — Using the printer control panel diagram (page 132)
Fig. 147 · Using the printer control panel
Lexmark MS818 — Using the printer control panel diagram (page 132)
Fig. 148 · Using the printer control panel
  • 1 Display
  • View the status of the printer.
  • Set up and operate the printer.

3 Sleep button Enable Sleep mode or Hibernate mode.

Do the following to wake the printer from Sleep mode:

  • Press and release the Sleep button.
  • Touch the screen or press any hard button.
  • Open a tray, cover, or door.
  • Send a print job from the computer.
  • Perform a power ‑ on reset with the main power switch.
  • Attach a device to a USB port.

4 Keypad Enter numbers, letters, or symbols on the printer.

5 Stop or Cancel button Stop all printer activity.

6 Indicator light Check the status of the printer.

Using MS812de 132

Page 133 of the Lexmark MS818 user manual — Understanding the home screen
Page 133 · click to enlarge
Page 133

7 USB port Connect a USB Bluetooth adapter or a flash drive to the printer.

Understanding the colors of the Sleep button and indicator lights

The colors of the Sleep button and indicator lights on the printer control panel signify a certain printer status or condition.

Indicator light Printer status

Off The printer is off or in Hibernate mode.

Blinking green The printer is warming up, processing data, or printing.

Solid green The printer is on, but idle.

Blinking red The printer requires user intervention.

Sleep button light Printer status

Off The printer is off, idle or in Ready state.

Solid amber The printer is in Sleep mode.

Blinking amber The printer is entering or waking from Hibernate mode.

Blinking amber for 0.1 second, then goes completely off for 1.9 seconds in a slow, pulsing pattern

The printer is in Hibernate mode.

Understanding the home screen

When the printer is turned on, the display shows a basic screen, referred to as the home screen. Use the home screen buttons and icons to initiate an action.

1 2 3 4

Lexmark MS818 — Understanding the home screen diagram (page 133)
Fig. 149 · Understanding the home screen

5 6 7 8

Using MS812de 133 · Use the To

Page 134 of the Lexmark MS818 user manual — Using the touch-screen buttons
Page 134 · click to enlarge
Page 134

1 Search Held Jobs Search current held jobs.

2 Held Jobs Display all current held jobs.

3 Forms and Favorites Access frequently used online forms.

4 Eco‑Settings Adjust energy consumption, noise, toner and paper usage.

5 Menus Access printer menus.

  • 6 Status message bar
  • Show the current printer status such as Ready or Busy .
  • Show printer conditions such as Imaging unit low or Cartridge Low .
  • Show intervention messages and the instructions on how to clear them.
  • 7 Status/Supplies
  • Show a printer warning or error message whenever the printer requires intervention to continue processing.
  • View more information on the printer warning or message, and on how to clear it.

8 Tips Open a context‑sensitive Help information on the printer control panel.

Features

If an attendance message affects a function, then this icon appears and the red indicator light blinks.

The IP address of your network printer is located at the top left corner of the home screen and appears as four sets of numbers separated by periods. You can use the IP address when accessing the Embedded Web Server so you can view and remotely configure printer settings even when you are not physically near the printer.

Example123.123.123.123

Using the touch-screen buttons

Show 5 more labels / short text on this page
Using MS812de 134 · Touch To · Feature Description · Attendance message alert · Printer IP address
Page 135 of the Lexmark MS818 user manual — Using the touch-screen buttons
Page 135 · click to enlarge
Page 135
Lexmark MS818 — Using the touch-screen buttons diagram (page 135)
Fig. 150 · Using the touch-screen buttons

4 5 6 7 8

Scroll to the left.

Scroll to the right.

Scroll up.

Scroll down.

5 Submit Submit changes made in the printer settings.

6 Back Return to the previous screen.

Return to the home screen.

Open a context-sensitive Help dialog on the printer control panel.

Show 8 more labels / short text on this page
Using MS812de 135 · Touch To · 1 Left arrow · 2 Right arrow · 3 Up arrow · 4 Down arrow · 7 Home · 8 Tips
Page 136 of the Lexmark MS818 user manual — Other touch-screen buttons
Page 136 · click to enlarge
Page 136

Other touch-screen buttons

Save settings.

  • Cancel an action or a selection.
  • Leave a screen and return to the previous screen without saving changes.

Select a higher value.

Select a lower value.

Leave the current screen.

Search current held jobs.

Show 8 more labels / short text on this page
Using MS812de 136 · Touch To · Accept · Cancel · Increase · Decrease · Exit · Search
Page 137 of the Lexmark MS818 user manual — Accessing the Embedded Web Server
Page 137 · click to enlarge
Page 137

Setting up and using the home screen applications

  • Your home screen may vary depending on your home screen customization settings, administrative setup, and active embedded applications. Some applications are supported only in some printer models.
  • There may be additional solutions and applications available for purchase. For more information, go to <a href="http://www.lexmark.com" rel="nofollow noopener" target="_blank">www.lexmark.com</a> or contact the place where you purchased the printer.

Finding the IP address of the computer

For Windows users

1 In the Run dialog box, type cmd to open the command prompt.

2 Type ipconfig, and then look for the IP address.

For Macintosh users

1 From System Preferences in the Apple menu, select Network.

2 Select your connection type, and then click Advanced > TCP/IP.

3 Look for the IP address.

Finding the IP address of the printer

You can find the printer IP address:

  • From the top left corner of the printer home screen.
  • From the TCP/IP section in the Network/Ports menu.
  • By printing a network setup page or menu settings page, and then finding the TCP/IP section.

Accessing the Embedded Web Server

The Embedded Web Server is the printer Web page that lets you view and remotely configure printer settings even when you are not physically near the printer.

  • 1 Obtain the printer IP address:
  • From the printer control panel home screen
  • From the TCP/IP section in the Network/Ports menu
  • By printing a network setup page or menu settings page, and then finding the TCP/IP section

2 Open a Web browser, and then type the printer IP address in the address field.

3 Press Enter.

Using MS812de 137

Page 138 of the Lexmark MS818 user manual — Using Background and Idle Screen
Page 138 · click to enlarge
Page 138

Customizing the home screen

1 Open a Web browser, and then type the printer IP address in the address field.

2 Do one or more of the following: • Show or hide icons of basic printer functions. a Click Settings > General Settings > Home screen customization. b Select the check boxes to specify which icons appear on the printer home screen.

Activating the home screen applications

Finding information about the home screen applications

Your printer comes with preinstalled home screen applications. Before you can use these applications, you must first activate and set up these applications using the Embedded Web Server. For more information on accessing the Embedded Web Server, see “Accessing the Embedded Web Server” on page 89.

For more information on configuring and using the home screen applications, do the following:

1 Go to http://support.lexmark.com.

  • 2 Click Software Solutions , and then select either of the following:
  • Scan to Network —This lets you find information about the Scan to Network application.
  • Other Applications —This lets you find information about the other applications.

3 Click the Manuals tab, and then select the document for the home screen application.

Using Background and Idle Screen

Customize the background and idle screen of your printer home screen.

From the home screen, navigate to:

Change Background > select background to use > Apply

Using MS812de 138 · Use To

Page 139 of the Lexmark MS818 user manual — Setting up Forms and Favorites
Page 139 · click to enlarge
Page 139

Setting up Forms and Favorites

Quickly find and print frequently used online forms directly from the printer home screen.

1 Open a Web browser, and then type the printer IP address in the address field.

2 Click Settings > Apps > Apps Management > Forms and Favorites.

3 Click Add, and then customize the settings.

  • See the mouse-over help beside each field for a description of the setting.
  • To make sure the location settings of the bookmark are correct, type the correct IP address of the host computer where the bookmark is located. For more information on obtaining the IP address of the host computer, see “Finding the IP address of the computer” on page 89 .
  • Make sure the printer has access rights to the folder where the bookmark is located.

4 Click Apply.

To use the application, touch Forms and Favorites on the printer home screen, and then navigate through form categories, or search for forms based on a form number, name, or description.

Understanding Eco‑Settings

Manage energy consumption, noise, toner, and paper usage settings to help reduce the environmental impact of your printer.

Using MS812de 139 · Use To · Use To

Page 140 of the Lexmark MS818 user manual — Setting up Remote Operator Panel
Page 140 · click to enlarge
Page 140

Exporting and importing a configuration

You can export configuration settings into a text file, and then import the file to apply the settings to other printers.

1 Open a Web browser, and then type the printer IP address in the address field.

2 To export or import a configuration for one application, do the following: a Click Settings > Apps > Apps Management. b From the list of installed applications, click the name of the application you want to configure.

c Click Configure, and then do either of the following:

  • To export a configuration to a file, click Export , and then follow the instructions on the computer screen to save the configuration file.

– When saving the configuration file, you can type a unique file name or use the default name. – If a "JVM Out of Memory” error occurs, then repeat the export process until the configuration

file is saved. • To import a configuration from a file, click Import, and then browse to the saved configuration file that was exported from a previously configured printer.

– Before importing the configuration file, you can choose to preview it first or load it directly. – If a timeout occurs and a blank screen appears, then refresh the Web browser, and then click

Apply.

3 To export or import a configuration for multiple applications, do the following: a Click Settings > Import/Export. b Do either of the following:

  • To export a configuration file, click Export Embedded Solutions Settings File , and then follow the instructions on the computer screen to save the configuration file.
  • To import a configuration file, do the following: 1 Click Import Embedded Solutions Settings File > Choose File , and then browse to the saved configuration file that was exported from a previously configured printer. 2 Click Submit .

Setting up Remote Operator Panel

This application enables you to interact with the printer control panel even when you are not physically near the network printer. From your computer, you can view the printer status, release held print jobs, create bookmarks, and do other print-related tasks.

1 Open a Web browser, and then type the printer IP address in the address field.

2 Click Settings > Remote Operator Panel Settings.

Using MS812de 140

Page 141 of the Lexmark MS818 user manual — Configuring Universal paper settings
Page 141 · click to enlarge
Page 141

3 Select the Enable check box, and then customize the settings.

4 Click Submit.

To use the application, click Remote Operator Panel > Launch VNC Applet.

Loading paper and specialty media

The selection and handling of paper and specialty media can affect how reliably documents print. For more information, see “Avoiding jams” on page 263 and “Storing paper” on page 182.

Setting the paper size and type

From the home screen navigate to:

> Paper Menu > Paper Size/Type > select a tray > select a paper size or type > Submit

  • The paper size is automatically set according to the position of the paper guides in each tray except the multipurpose feeder.
  • The paper size for the multipurpose feeder must be set manually from the Paper Size menu.
  • The paper type must be set manually for all trays that do not contain plain paper.

Configuring Universal paper settings

Universal paper size is a user‑defined setting that lets you print on paper sizes that are not preset in the printer menus.

  • The smallest supported Universal size is 70 x 127 mm (2.76 x 5 inches) for one ‑ sided printing and 105 x 148 mm (4.13 x 5.83 inches) for two ‑ sided (duplex) printing.
  • The largest supported Universal size is 216 x 356 mm (8.5 x 14 inches) for one ‑ sided and two ‑ sided printing.
  • When printing on paper less than 210 mm (8.3 inches) wide, the printer may print at a reduced speed after a period of time to ensure the best print performance.
  • If you regularly print large jobs on narrow paper, then you may use the MS710 Series printer models, which print batches of 10 or more pages of narrow paper at a faster speed. For more information on the MS710 Series printer models, contact your Lexmark sales representative.

1 From the home screen, navigate to:

> Paper Menu > Universal Setup > Units of Measure > select a unit of measure

2 Touch Portrait Width or Portrait Height.

3 Select the width or height, and then touch Submit.

Using MS812de 141

Page 142 of the Lexmark MS818 user manual — Loading the 250 ‑ or 550 ‑ sheet tray
Page 142 · click to enlarge
Page 142

Loading the 250 ‑ or 550 ‑ sheet tray

1 Pull out the tray.

  • When loading folio ‑ , legal ‑ , or Oficio ‑ size paper, lift the tray slightly and then pull it out completely.
  • Do not remove trays while a job prints or while Busy appears on the display. Doing so may cause a jam.
Lexmark MS818 — Loading the 250 ‑ or 550 ‑ sheet tray diagram (page 142)
Fig. 151 · Loading the 250 ‑ or 550 ‑ sheet tray

Using MS812de 142

Page 143 of the Lexmark MS818 user manual — Loading the 250or 550-sheet tray
Page 143 · click to enlarge
Page 143

2 Squeeze and slide the width guide to the correct position for the size of the paper being loaded until it clicks into place.

Lexmark MS818 — Loading the 250or 550-sheet tray diagram (page 143)
Fig. 152 · Loading the 250or 550-sheet tray
Lexmark MS818 — Loading the 250or 550-sheet tray diagram (page 143)
Fig. 153 · Loading the 250or 550-sheet tray

Using MS812de 143

Page 144 of the Lexmark MS818 user manual — Loading the 250or 550-sheet tray
Page 144 · click to enlarge
Page 144

3 Unlock the length guide, and then squeeze and slide the guide to the correct position for the size of the paper being loaded.

Lexmark MS818 — Loading the 250or 550-sheet tray diagram (page 144)
Fig. 154 · Loading the 250or 550-sheet tray
  • Lock the length guide for all paper sizes.
  • Use the paper size indicators at the bottom of the tray to help position the guides.
Lexmark MS818 — Loading the 250or 550-sheet tray diagram (page 144)
Fig. 155 · Loading the 250or 550-sheet tray

Using MS812de 144

Page 145 of the Lexmark MS818 user manual — Loading the 250or 550-sheet tray
Page 145 · click to enlarge
Page 145

4 Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface.

Lexmark MS818 — Loading the 250or 550-sheet tray diagram (page 145)
Fig. 156 · Loading the 250or 550-sheet tray

5 Load the paper stack with the printable side facedown.

  • There are different ways of loading letterhead depending on whether an optional staple finisher is installed or not.
Lexmark MS818 — Loading the 250or 550-sheet tray diagram (page 145)
Fig. 157 · Loading the 250or 550-sheet tray

Without an optional staple finisher With an optional staple finisher

  • If you are loading prepunched paper for use with the staple finisher, then make sure the holes on the long edge of the paper are on the right side of the tray.
Lexmark MS818 — Loading the 250or 550-sheet tray diagram (page 145)
Fig. 158 · Loading the 250or 550-sheet tray

Using MS812de 145

Page 146 of the Lexmark MS818 user manual — Loading the 250or 550-sheet tray
Page 146 · click to enlarge
Page 146
  • Do not slide the paper into the tray. Load paper as shown in the illustration.
Lexmark MS818 — Loading the 250or 550-sheet tray diagram (page 146)
Fig. 159 · Loading the 250or 550-sheet tray
  • If you are loading envelopes, then make sure that the flap side is facing up and the envelopes are on the left side of the tray.

Using MS812de 146

Page 147 of the Lexmark MS818 user manual — Loading the 250or 550-sheet tray
Page 147 · click to enlarge
Page 147
  • Make sure the paper is below the solid line, which is the maximum paper fill indicator.
Lexmark MS818 — Loading the 250or 550-sheet tray diagram (page 147)
Fig. 160 · Loading the 250or 550-sheet tray

Using MS812de 147

Page 148 of the Lexmark MS818 user manual — Loading the 250or 550-sheet tray
Page 148 · click to enlarge
Page 148
  • When using card stock, labels, or other types of specialty media, make sure the paper is below the dashed line, which is the alternate paper fill indicator.
Lexmark MS818 — Loading the 250or 550-sheet tray diagram (page 148)
Fig. 161 · Loading the 250or 550-sheet tray

6 For custom‑ or Universal‑size paper, adjust the paper guides to lightly touch the sides of the stack, and then lock the length guide.

7 Insert the tray.

8 From the printer control panel, set the paper size and paper type in the Paper menu to match the paper loaded in the tray.

Using MS812de 148

Page 149 of the Lexmark MS818 user manual — Loading the 2100 ‑ sheet tray
Page 149 · click to enlarge
Page 149

Loading the 2100 ‑ sheet tray

1 Pull out the tray.

2 Adjust the width and length guides.

Loading A5‑size paper

a Pull up and slide the width guide to the position for A5.

Lexmark MS818 — Loading the 2100 ‑ sheet tray diagram (page 149)
Fig. 162 · Loading the 2100 ‑ sheet tray

Using MS812de 149

Page 150 of the Lexmark MS818 user manual — Loading the 2100-sheet tray
Page 150 · click to enlarge
Page 150

b Squeeze and slide the length guide to the position for A5 until it clicks into place.

Lexmark MS818 — Loading the 2100-sheet tray diagram (page 150)
Fig. 163 · Loading the 2100-sheet tray

c Remove the A5 length guide from its holder.

d Insert the A5 length guide into its designated slot.

Using MS812de 150

Page 151 of the Lexmark MS818 user manual — Loading the 2100-sheet tray
Page 151 · click to enlarge
Page 151

Loading A4‑, letter‑, legal‑, oficio‑, and folio‑size paper

a Pull up and slide the width guide to the correct position for the size of the paper being loaded.

Lexmark MS818 — Loading the 2100-sheet tray diagram (page 151)
Fig. 164 · Loading the 2100-sheet tray

Using MS812de 151

Page 152 of the Lexmark MS818 user manual — Loading the 2100-sheet tray
Page 152 · click to enlarge
Page 152

b If the A5 length guide is still attached to the length guide, then remove it from its place. If the A5 length

guide is not attached, then proceed to step d.

c Put the A5 length guide in its holder.

Using MS812de 152

Page 153 of the Lexmark MS818 user manual — Loading the 2100-sheet tray
Page 153 · click to enlarge
Page 153

d Squeeze the length guide and slide it to the correct position for the size of the paper being loaded until

it clicks into place.

Lexmark MS818 — Loading the 2100-sheet tray diagram (page 153)
Fig. 165 · Loading the 2100-sheet tray

3 Flex sheets of paper back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface.

Lexmark MS818 — Loading the 2100-sheet tray diagram (page 153)
Fig. 166 · Loading the 2100-sheet tray

4 Load the paper stack with the printable side facedown.

  • There are different ways of loading letterhead depending on whether an optional staple finisher is installed or not.

Using MS812de 153

Page 154 of the Lexmark MS818 user manual — Loading the 2100-sheet tray
Page 154 · click to enlarge
Page 154
Lexmark MS818 — Loading the 2100-sheet tray diagram (page 154)
Fig. 167 · Loading the 2100-sheet tray

Without an optional staple finisher With an optional staple finisher

  • If you are loading prepunched paper for use with the staple finisher, then make sure the holes on the long edge of the paper are on the right side of the tray.
Lexmark MS818 — Loading the 2100-sheet tray diagram (page 154)
Fig. 168 · Loading the 2100-sheet tray

Using MS812de 154

Page 155 of the Lexmark MS818 user manual — Loading the 2100-sheet tray
Page 155 · click to enlarge
Page 155
  • Make sure the paper is below the maximum paper fill indicator.

5 Insert the tray.

Using MS812de 155

Page 156 of the Lexmark MS818 user manual — B5
Page 156 · click to enlarge
Page 156

6 From the printer control panel, set the paper size and type in the Paper menu to match the paper loaded.

Loading the multipurpose feeder

1 Pull down the multipurpose feeder door.

Lexmark MS818 — Loading the multipurpose feeder diagram (page 156)
Fig. 169 · Loading the multipurpose feeder

B5

EXEC

A4 A5

LTR

Using MS812de 156

Page 157 of the Lexmark MS818 user manual — LTR
Page 157 · click to enlarge
Page 157

2 Using the handle, pull the multipurpose feeder extender.

A4 A5

LTR

B5

EXEC

3 Slide the width guide to the correct position for the size of the paper being loaded.

LTR

A4 A5

EXEC

B5

Using MS812de 157

Page 158 of the Lexmark MS818 user manual — EXEC
Page 158 · click to enlarge
Page 158
Lexmark MS818 — Loading the multipurpose feeder diagram (page 158)
Fig. 170 · Loading the multipurpose feeder

EXEC

B5

4 Prepare the paper or specialty media for loading. • Flex sheets of paper back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface.

Lexmark MS818 — EXEC diagram (page 158)
Fig. 171
  • Hold transparencies by the edges, and then fan them. Straighten the edges on a level surface.

5 Load the paper or specialty media.

  • Load only one size and type of paper or specialty media at a time.
  • Make sure the paper fits loosely in the multipurpose feeder, lies flat and is not bent or wrinkled.

Using MS812de 158

Page 159 of the Lexmark MS818 user manual — ABC
Page 159 · click to enlarge
Page 159
  • There are different ways of loading letterhead depending on whether an optional staple finisher is installed or not.

Without an optional staple finisher With an optional staple finisher

ABC

ABC

One‑sided printing

One‑sided printing

ABC

Two‑sided printing

Two‑sided printing

  • If you are loading prepunched paper for use with the staple finisher, then make sure the holes on the long edge of the paper are on the right side of the tray.

One‑sided printing Two‑sided printing

ABC

Using MS812de 159

Page 160 of the Lexmark MS818 user manual — A4 A5
Page 160 · click to enlarge
Page 160
  • Load envelopes with the flap side down and on the left of the multipurpose feeder.

A4 A5

LTR

B5

EXEC

6 For custom- or Universal-size paper, adjust the width guides to lightly touch the sides of the stack.

7 From the printer control panel, set the paper size and type in the Paper menu to match the paper loaded in the tray.

Using MS812de 160

Page 161 of the Lexmark MS818 user manual — Creating a custom name for a paper type
Page 161 · click to enlarge
Page 161

Linking and unlinking trays

Linking and unlinking trays

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Paper Menu.

  • 3 Change the paper size and type settings for the trays you are linking.
  • To link trays, make sure the paper size and type for the tray match that of the other tray.
  • To unlink trays, make sure the paper size or type for the tray does not match that of the other tray.

4 Click Submit.

Creating a custom name for a paper type

Using the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Paper Menu > Custom Names.

3 Select a custom name, and then type a custom paper type name.

4 Click Submit.

5 Click Custom Types, and then verify if the new custom paper type name has replaced the custom name.

Using the printer control panel

1 From the home screen, navigate to:

> Paper Menu > Custom Names

2 Select a custom name, and then type a custom paper type name.

3 Touch Submit.

4 Touch Custom Types, and then verify if the new custom paper type name has replaced the custom name.

Using MS812de 161

Page 162 of the Lexmark MS818 user manual — Printing forms
Page 162 · click to enlarge
Page 162

Assigning a custom paper type

Using the Embedded Web Server

Assign a custom paper type name to a tray when linking or unlinking trays.

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Paper Menu > Custom Types.

3 Select a custom paper type name, and then select a paper type.

4 Click Submit.

Using the printer control panel

1 From the home screen, navigate to:

> Paper Menu > Custom Types

2 Select a custom paper type name, and then select a paper type.

3 Touch Submit.

Printing

Printing a document

Printing from a computer

1 From the document that you are trying to print, open the Print dialog.

2 If necessary, adjust the settings.

3 Send the print job.

Printing forms

1 From the home screen, navigate to:

Forms and Favorites > select form > Print

2 If necessary, configure the print settings.

Using MS812de 162

Page 163 of the Lexmark MS818 user manual — Printing from a flash drive
Page 163 · click to enlarge
Page 163

3 Send the print job.

Adjusting toner darkness

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Print Settings > Quality Menu > Toner Darkness.

3 Adjust the toner darkness, and then click Submit.

Using the printer control panel

1 From the home screen, navigate to:

> Settings > Print Settings > Quality Menu > Toner Darkness

2 Adjust the setting, and then touch Submit.

Printing from a flash drive

Printing from a flash drive

  • Before printing an encrypted PDF file, you will be prompted to type the file password from the printer control panel.
  • You cannot print files for which you do not have printing permissions.

1 Insert a flash drive into the USB port.

  • A flash drive icon appears on the printer home screen when a flash drive is inserted.

Using MS812de 163

Page 164 of the Lexmark MS818 user manual — Supported flash drives and file types
Page 164 · click to enlarge
Page 164
  • If you insert the flash drive when the printer requires attention, such as when a jam has occurred, then the printer ignores the flash drive.
  • If you insert the flash drive while the printer is processing other print jobs, then Busy appears. After these print jobs are processed, you may need to view the held jobs list to print documents from the flash drive.

2 From the printer control panel, touch the document you want to print.

3 Touch the arrows to specify the number of copies for printing, and then touch Print.

  • Do not remove the flash drive from the USB port until the document has finished printing.
  • If you leave the flash drive in the printer after leaving the initial USB menu screen, then touch Held Jobs on the home screen to print files from the flash drive.

Supported flash drives and file types

  • High ‑ speed USB flash drives must support the full ‑ speed standard. Low-speed USB devices are not supported.
  • USB flash drives must support the File Allocation Table (FAT) system. Devices formatted with New Technology File System (NTFS) or any other file system are not supported.

Using MS812de 164

Page 165 of the Lexmark MS818 user manual — Printing from a mobile device using AirPrint
Page 165 · click to enlarge
Page 165

Recommended flash drives File type

  • Lexar JumpDrive FireFly (512MB and 1GB)
  • SanDisk Cruzer Micro (512MB and 1GB)
  • Sony Micro Vault Classic (512MB and 1GB)

Documents:

  • .pdf
  • .xps

Images:

  • .dcx
  • .gif
  • .jpeg or .jpg
  • .bmp
  • .pcx
  • .tiff or .tif
  • .png
  • .fls

Printing from a mobile device

Printing from a mobile device using Mopria Print Service

Mopria® Print Service is a mobile printing solution for mobile devices running on Android version 4.4 or later. It allows you to print directly to any Mopria‑certified printer.

1 From the home screen of your mobile device, launch a compatible application.

2 Tap Print, and then select the printer.

3 Send the print job.

Printing from a mobile device using Google Cloud Print

Google Cloud Print is a mobile printing service that allows enabled applications on mobile devices to print to any Google Cloud Print‑ready printer.

1 From the home screen of your mobile device, launch an enabled application.

2 Tap Print, and then select the printer.

3 Send the print job.

Printing from a mobile device using AirPrint

AirPrint is a mobile printing solution that allows you to print directly from Apple devices to an AirPrint‑certified printer.

Using MS812de 165

Page 166 of the Lexmark MS818 user manual — Storing print jobs in the printer
Page 166 · click to enlarge
Page 166

1 From the home screen of your mobile device, launch a compatible application.

2 Select an item to print, and then tap the share icon.

3 Tap Print, and then select the printer.

4 Send the print job.

Printing from a mobile device using Lexmark Print

Lexmark Print allows you to send documents and images directly to a Lexmark device.

1 Open the document, and then send or share the document to Lexmark Print.

2 Select a device.

3 Print the document.

Printing confidential and other held jobs

Storing print jobs in the printer

1 From the printer control panel, navigate to:

> Security > Confidential Print > select the print job type

Max Invalid PIN Limit the number of times an invalid PIN can be entered.

Confidential Job Expiration Hold print jobs in the computer until you enter the PIN from the printer control panel.

Repeat Job Expiration Print and store print jobs in the printer memory.

Verify Job Expiration Print one copy of a print job and hold the remaining copies. It allows you to examine if the first copy is satisfactory. The print job is automatically deleted from the printer memory when all copies are printed.

Reserve Job Expiration Store print jobs for printing at a later time.

Using MS812de 166 · Use To

Page 167 of the Lexmark MS818 user manual — Printing a directory list
Page 167 · click to enlarge
Page 167
  • Confidential, Verify, Reserve, and Repeat print jobs may be deleted if the printer requires extra memory to process additional held jobs.
  • You can set the printer to store print jobs in the printer memory until you start the print job from the printer control panel.
  • All print jobs that can be initiated by the user at the printer are called held jobs .

2 Touch Submit.

Printing held jobs

1 From the document you are trying to print, open the Print dialog.

  • 2 Select the printer, and then do the following:
  • For Windows users, click Properties or Preferences , and then click Print and Hold .
  • For Macintosh users, select Print and Hold .

3 Select the print job type.

4 If necessary, assign a user name.

5 Send the print job.

6 From the printer home screen, touch Held Jobs.

7 Send the print job.

Printing information pages

Printing a font sample list

1 From the home screen, navigate to:

> Reports > Print Fonts

2 Touch PCL Fonts or PostScript Fonts.

Printing a directory list

A directory list shows the resources stored in a flash memory or in the printer hard disk.

From the home screen, navigate to:

> Reports > Print Directory

Using MS812de 167 · Use To

Page 168 of the Lexmark MS818 user manual — Configuring supply notifications from the Embedded Web Server
Page 168 · click to enlarge
Page 168

Canceling a print job

Canceling a print job from the printer control panel

1 From the printer control panel, touch Cancel Job or press

on the keypad.

2 Touch the print job you want to cancel, and then touch Delete Selected Jobs.

on the keypad, then touch Resume to return to the home screen.

Canceling a print job from the computer

For Windows users

1 Open the printers folder, and then select your printer.

2 From the print queue, select the print job you want to cancel, and then delete it.

For Macintosh users

1 From System Preferences in the Apple menu, navigate to your printer.

2 From the print queue, select the print job you want to cancel, and then delete it.

Managing your printer

Finding advanced networking and administrator information

This chapter covers basic administrative support tasks using the Embedded Web Server. For more advanced system support tasks, see the Networking Guide on the Software and Documentation CD or the Embedded Web Server — Security: Administrator's Guide on the Lexmark support Web site at http://support.lexmark.com.

Checking the virtual display

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Check the virtual display that appears in the top left corner of the screen.

The virtual display works as an actual display would work on a printer control panel.

Configuring supply notifications from the Embedded Web Server

You can determine how you would like to be notified when supplies run nearly low, low, very low, or reach their end‑of‑life by setting the selectable alerts.

Using MS812de 168

Page 169 of the Lexmark MS818 user manual — Modifying confidential print settings
Page 169 · click to enlarge
Page 169
  • Selectable alerts can be set on the toner cartridge, imaging unit, and maintenance kit.
  • All selectable alerts can be set for nearly low, low, and very low supply conditions. Not all selectable alerts can be set for the end ‑ of ‑ life supply condition. E ‑ mail selectable alert is available for all supply conditions.
  • The percentage of estimated remaining supply that prompts the alert can be set on some supplies for some supply conditions.

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Print Settings > Supply Notifications.

3 From the drop‑down menu for each supply, select one of the following notification options:

Off The normal printer behavior for all supplies occurs.

E‑mail Only The printer generates an e-mail when the supply condition is reached. The status of the supply will appear on the menus page and status page.

Continuable Stop1 The printer stops processing jobs when the supply condition is reached, and the user needs to press a button to continue printing.

Non Continuable Stop1,2 The printer stops when the supply condition is reached. The supply must be replaced

to continue printing.

1 The printer generates an e-mail about the status of the supply when supply notification is enabled.

2 The printer stops when some supplies become empty to prevent damage.

4 Click Submit.

Modifying confidential print settings

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Security > Confidential Print Setup.

Using MS812de 169 · Notification Description

Page 170 of the Lexmark MS818 user manual — Printing a network setup page
Page 170 · click to enlarge
Page 170
  • 3 Modify the settings:
  • Set a maximum number of PIN entry attempts. When a user exceeds that number, all of the jobs for that user are deleted.
  • Set an expiration time for confidential print jobs. When a user has not printed the jobs within that time, all of the jobs for that user are deleted.

4 Click Submit to save the modified settings.

Copying printer settings to other printers

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Copy Printer Settings.

3 To change the language, select a language from the drop‑down menu, and then click Click here to submit language.

4 Click Printer Settings.

5 Type the IP addresses of the source and target printers.

6 Click Copy Printer Settings.

Printing a menu settings page

From the home screen, navigate to:

> Reports > Menu Settings Page

Printing a network setup page

If the printer is attached to a network, then print a network setup page to verify the network connection. This page also provides important information that aids network printing configuration.

1 From the home screen, navigate to:

> Reports > Network Setup Page

2 Check the first section of the network setup page and confirm that the status is Connected.

If the status is Not Connected, then the LAN drop may not be active, or the network cable may be malfunctioning. Consult your system support person for a solution, and then print another network setup page.

Using MS812de 170

Page 171 of the Lexmark MS818 user manual — Saving energy
Page 171 · click to enlarge
Page 171

Checking the status of parts and supplies

A message appears on the printer display when a replacement supply item is needed or when maintenance is required.

  • Each gauge displays the estimated life left for the supply or part.
  • All page life estimates for supplies assume printing on a single side of letter ‑ or A4 ‑ size plain paper.

Checking the status of parts and supplies on the printer control panel

From the home screen, navigate to:

Status/Supplies > View Supplies

Checking the status of parts and supplies from the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Device Status > More Details.

Saving energy

Using Eco‑Mode

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > General Settings > Eco‑Mode.

3 Select a setting.

Using MS812de 171

Page 172 of the Lexmark MS818 user manual — Reducing printer noise
Page 172 · click to enlarge
Page 172

Off Use the factory default settings for all settings associated with Eco‑Mode.

  • Settings that were changed when other modes were selected are reset to the factory default settings.
  • Off supports the performance specifications of the printer.

Energy Reduce energy use, especially when the printer is idle.

  • Printer engine motors do not start until a document is ready to print. You may notice a short delay before the first page is printed.
  • The printer enters Sleep mode after one minute of inactivity.
  • The printer display is turned off when the printer is in Sleep mode.
  • Lights on the staple finisher and other optional finishers are turned off when the printer is in Sleep mode.

Energy/Paper Use all the settings associated with Energy and Paper modes.

Plain Paper Enable the automatic two‑sided (duplex) printing feature.

4 Click Submit.

Reducing printer noise

Enable Quiet mode to reduce printer noise.

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > General Settings > Quiet Mode.

3 Select a setting.

Using MS812de 172 · Use To

Page 173 of the Lexmark MS818 user manual — Restoring factory default settings
Page 173 · click to enlarge
Page 173

On Reduce printer noise.

  • Print jobs process at a reduced speed.
  • Printer engine motors do not start until a document is ready to print. There is a short delay before the first page is printed.
  • The alarm control and cartridge alarm sounds are turned off.
  • The printer will ignore the Advance Start command.

Off Use factory default settings.

4 Click Submit.

Adjusting Sleep mode

1 From the home screen, navigate to:

> Settings > General Settings > Timeouts > Sleep Mode

2 In the Sleep Mode field, select the number of minutes the printer is idle before it enters Sleep mode.

3 Apply the changes.

Using Hibernate mode

Hibernate is an ultra‑low‑power operating mode.

  • Three days is the default amount of time before the printer enters Hibernate mode.
  • Make sure to wake the printer from Hibernate mode before sending a print job. A hard reset or a long press of the Sleep button wakes the printer from Hibernate mode.
  • If the printer is in Hibernate mode, then the Embedded Web Server is disabled.

1 From the home screen, navigate to:

> Settings > General Settings

2 From the “Press Sleep Button” or “Press and Hold Sleep Button” menu, select Hibernate, and then touch Submit.

Restoring factory default settings

If you want to keep a list of the current menu settings for reference, then print a menu settings page before restoring the factory default settings. For more information, see “Printing a menu settings page” on page 170.

Using MS812de 173 · Use To

Page 174 of the Lexmark MS818 user manual — Statement of Volatility
Page 174 · click to enlarge
Page 174

If you want a more comprehensive method of restoring the printer factory default settings, then perform the Wipe All Settings option. For more information, see “Erasing non‑volatile memory” on page 175.

From the home screen, navigate to:

> Settings > General Settings > Factory Defaults > Restore Now > Submit

Securing the printer

Using the security lock feature

The printer is equipped with a security lock feature. When a lock compatible with most laptop computers is attached, the printer is locked. When locked, the controller board shield and the controller board cannot be removed. Attach a security lock to the printer in the location shown.

Statement of Volatility

Your printer contains various types of memory that can store device and network settings, and user data.

Type of memory Description

Volatile memory Your printer uses standard random access memory (RAM) to temporarily buffer user data during simple print jobs.

Non-volatile memory Your printer may use two forms of non-volatile memory: EEPROM and NAND (flash memory). Both types are used to store the operating system, device settings, network information, bookmark settings, and embedded solutions.

Using MS812de 174

Page 175 of the Lexmark MS818 user manual — Erasing volatile memory
Page 175 · click to enlarge
Page 175

Type of memory Description

Hard disk memory Some printers have a hard disk drive installed. The printer hard disk is designed for device-specific functionality. This lets the device retain buffered user data from complex print jobs, as well as form data, and font data.

Erase the content of any installed printer memory in the following circumstances:

  • The printer is being decommissioned.
  • The printer hard disk is being replaced.
  • The printer is being moved to a different department or location.
  • The printer is being serviced by someone from outside your organization.
  • The printer is being removed from your premises for service.
  • The printer is being sold to another organization.

Disposing of a printer hard disk

In high‑security environments, it may be necessary to take additional steps to make sure that confidential data stored in the printer hard disk cannot be accessed when the printer—or its hard disk—is removed from your premises.

  • Degaussing —Flushes the hard disk with a magnetic field that erases stored data
  • Crushing —Physically compresses the hard disk to break component parts and render them unreadable
  • Milling —Physically shreds the hard disk into small metal bits

Erasing volatile memory

The volatile memory (RAM) installed in your printer requires a power source to retain information. To erase the buffered data, simply turn off the printer.

Erasing non‑volatile memory

Erase individual settings, device and network settings, security settings, and embedded solutions by following these steps:

1 Turn off the printer.

2 Hold down 2 and 6 while turning the printer on. Release the buttons only when the screen with the progress bar appears.

The printer performs a power-on sequence, and then the Configuration menu appears. When the printer is fully turned on, a list of functions appears on the printer display, instead of the standard home screen icons.

3 Touch Wipe All Settings.

The printer restarts several times during this process.

4 Touch Back > Exit Config Menu.

Using MS812de 175

Page 176 of the Lexmark MS818 user manual — Configuring printer hard disk encryption
Page 176 · click to enlarge
Page 176

The printer will perform a power‑on reset, and then return to normal operating mode.

Erasing printer hard disk memory

  • Some printer models may not have a printer hard disk installed.
  • Configuring Erase Temporary Data Files in the printer menus lets you remove residual confidential material left by print jobs by securely overwriting files that have been marked for deletion.

Using the printer control panel

1 Turn off the printer.

2 Hold down 2 and 6 while turning the printer on. Release the buttons only when the screen with the progress bar appears.

The printer performs a power-on sequence, and then the Configuration menu appears. When the printer is fully turned on, the touch screen displays a list of functions.

  • 3 Touch Wipe Disk , and then touch one of the following:
  • Wipe disk (fast) —This lets you overwrite the disk with all zeroes in a single pass.
  • Wipe disk (secure) —This lets you overwrite the disk with random bit patterns several times, followed by a verification pass. A secure overwrite is compliant with the DoD 5220.22 ‑ M standard for securely erasing data from a hard disk. Highly confidential information should be wiped using this method.

4 Touch Yes to proceed with disk wiping.

  • A status bar will indicate the progress of the disk wiping task.
  • Disk wiping can take from several minutes to more than an hour, during which the printer will be unavailable for other user tasks.

5 Touch Back > Exit Config Menu.

The printer will perform a power‑on reset, and then return to normal operating mode.

Configuring printer hard disk encryption

Enable hard disk encryption to prevent loss of sensitive data in the event the printer or its hard disk is stolen.

Using the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.

Using MS812de 176

Page 177 of the Lexmark MS818 user manual — Finding printer security information
Page 177 · click to enlarge
Page 177
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Security > Disk Encryption.

3 From the Disk encryption menu, select Enable.

  • Enabling disk encryption will erase the contents of the printer hard disk.
  • Disk encryption can take from several minutes to more than an hour, during which the printer will be unavailable for other user tasks.

4 Click Submit.

Using the printer control panel

1 Turn off the printer.

2 Hold down 2 and 6 while turning the printer on. Release the buttons only when the screen with the progress bar appears.

The printer performs a power-on sequence, and then the Configuration menu appears. When the printer is fully turned on, a list of functions appears on the printer display.

3 Touch Disk Encryption > Enable.

4 Touch Yes to proceed with disk wiping.

  • Do not turn off the printer during the encryption process. Doing so may result in loss of data.
  • Disk encryption can take from several minutes to more than an hour, during which the printer will be unavailable for other user tasks.
  • A status bar will indicate the progress of the disk wiping task. After the disk has been encrypted, the printer will return to the Enable/Disable screen.

5 Touch Back > Exit Config Menu.

The printer will perform a power‑on reset, and then return to normal operating mode.

Finding printer security information

In high-security environments, it may be necessary to take additional steps to make sure that confidential data stored in the printer cannot be accessed by unauthorized persons. For more information, visit the Lexmark security Web page.

You can also see the Embedded Web Server — Security: Administrator’s Guide for additional information:

1 Go to www.lexmark.com, and then navigate to Support & Downloads > select your printer.

2 Click the Manuals tab, and then select Embedded Web Server — Security: Administrator’s Guide.

Using MS812de 177

Page 178 of the Lexmark MS818 user manual — Tips on using envelopes
Page 178 · click to enlarge
Page 178

Paper and specialty media guide 178

Paper and specialty media guide

  • Make sure that the paper size, type, and weight are set correctly on the computer or control panel.
  • Flex, fan, and straighten specialty media before loading them.
  • The printer may print at a reduced speed to prevent damage to the fuser.
  • For more information on card stock and labels, see the Card Stock & Label Guide at <a href="http://support.lexmark.com" rel="nofollow noopener" target="_blank">http://support.lexmark.com</a> .

Using specialty media

Tips on using card stock

Card stock is heavy, single‑ply specialty media. Many of its variable characteristics, such as moisture content, thickness, and texture, can significantly affect print quality.

  • From the printer control panel, set the paper size, type, texture, and weight in the Paper menu to match the card stock loaded in the tray.
  • Print samples on the card stock being considered for use before buying large quantities.
  • Specify the paper texture and weight from the tray settings to match the paper loaded in the tray.
  • Preprinting, perforation, and creasing may significantly affect the print quality and cause jams or other paper feed problems.
  • Before loading the card stock on the tray, flex and fan the card stock to loosen them. Straighten the edges on a level surface.

Tips on using envelopes

  • From the printer control panel, set the paper size, type, texture, and weight in the Paper menu to match the envelopes loaded in the tray.
  • Print samples on the envelopes being considered for use before buying large quantities.
  • Use envelopes designed specifically for laser printers.
  • For best performance, use envelopes made from 90 ‑ g/m 2 (24 ‑ lb) paper or 25% cotton.
  • Use only new envelopes from undamaged packages.
  • To optimize performance and minimize jams, do not use envelopes that: – Have excessive curl or twist. – Are stuck together or damaged in any way. – Have windows, holes, perforations, cutouts, or embossing. – Have metal clasps, string ties, or folding bars. – Have an interlocking design. – Have postage stamps attached. – Have any exposed adhesive when the flap is in the sealed or closed position.
Page 179 of the Lexmark MS818 user manual — Tips on using transparencies
Page 179 · click to enlarge
Page 179

Paper and specialty media guide 179

  • – Have bent corners. – Have rough, cockle, or laid finishes.
  • Adjust the width guides to fit the width of the envelopes.
  • Before loading the envelopes on the tray, flex the stack of envelopes back and forth to loosen them, and then fan them. Straighten the edges on a level surface.

Tips on using labels

  • From the printer control panel, set the paper size, type, texture, and weight in the Paper menu to match the labels loaded in the tray.
  • Print samples on labels being considered for use before buying large quantities.
  • For more information on label printing, characteristics, and design, see the Card Stock & Label Guide on the Lexmark Web site at <a href="http://support.lexmark.com" rel="nofollow noopener" target="_blank">http://support.lexmark.com</a> .
  • Use labels designed specifically for laser printers.
  • Do not use labels with slick backing material.
  • Do not use labels with exposed adhesive.
  • Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a jam. Partial sheets also contaminate the printer and the cartridge with adhesive, and could void the printer and toner cartridge warranties.
  • Before loading labels on the tray, flex and fan labels to loosen them. Straighten the edges on a level surface.

Tips on using transparencies

  • From the printer control panel, set the paper size, type, texture, and weight in the Paper menu to match the transparencies loaded in the tray.
  • Print a test page on the transparencies being considered for use before buying large quantities.
  • Use transparencies designed specifically for laser printers.
  • Avoid getting fingerprints on the transparencies to prevent print quality problems.
  • Before loading transparencies, flex and fan the sheets to prevent them from sticking together.
  • When printing on large volumes of transparencies, make sure to print by batches of only up to 20 with an interval of at least three minutes between batches, to prevent the transparencies from sticking together in the bin. You can also remove transparencies from the bin by batches of 20.
Page 180 of the Lexmark MS818 user manual — Fiber content
Page 180 · click to enlarge
Page 180

Paper and specialty media guide 180

Paper guidelines

Selecting the correct paper or specialty media reduces printing problems. For the best print quality, try a sample of the paper or specialty media before buying large quantities.

Paper characteristics

The following paper characteristics affect print quality and reliability. Consider these factors before printing on them:

Weight

The printer trays and multipurpose feeder can automatically feed paper weights between 60–176 g/m2 (16– 47‑lb) grain long paper. The 2100‑sheet tray can automatically feed paper weights up to 60–135 g/m2 (16–36‑lb) grain long paper. Paper lighter than 60 g/m2 (16 lb) might not be stiff enough to feed properly, and may cause jams.

Curl

Curl is the tendency for paper to curl at its edges. Excessive curl can cause paper feeding problems. Curl can occur after the paper passes through the printer, where it is exposed to high temperatures. Storing paper unwrapped in hot, humid, cold, or dry conditions, even in the trays, can contribute to paper curling prior to printing and can cause feeding problems.

Smoothness

Paper smoothness directly affects print quality. If paper is too rough, toner cannot fuse to it properly. If paper is too smooth, it can cause paper feeding or print quality issues. Always use paper between 100 and 300 Sheffield points; smoothness between 150 and 250 Sheffield points produces the best print quality.

Moisture content

The amount of moisture in paper affects both print quality and the ability of the printer to feed the paper correctly. Leave paper in its original wrapper until it is time to use it. This limits the exposure of paper to moisture changes that can degrade its performance.

Store paper in its original wrapper in the same environment as the printer for 24 to 48 hours before printing. Extend the time several days if the storage or transportation environment is very different from the printer environment. Thick paper may also require a longer conditioning period.

Grain direction

Grain refers to the alignment of the paper fibers in a sheet of paper. Grain is either grain long, running the length of the paper, or grain short, running the width of the paper.

For 60–176 g/m2 (16–47‑lb) paper, grain long paper is recommended.

Fiber content

Most high‑quality xerographic paper is made from 100% chemically treated pulped wood. This content provides the paper with a high degree of stability, resulting in fewer paper feeding problems and better print quality. Paper containing fibers such as cotton can negatively affect paper handling.

Page 181 of the Lexmark MS818 user manual — Using recycled paper and other office papers
Page 181 · click to enlarge
Page 181

Paper and specialty media guide 181

Selecting paper

Using the appropriate paper prevents jams and helps ensure trouble‑free printing.

To help avoid paper jams and poor print quality:

  • Always use new, undamaged paper.
  • Before loading paper, know the recommended printable side of the paper. This information is usually indicated on the paper package.
  • Do not use paper that has been cut or trimmed by hand.
  • Do not mix paper sizes, types, or weights in the same tray; mixing results in jams.
  • Do not use coated papers unless they are specifically designed for electrophotographic printing.

Selecting preprinted forms and letterhead

  • Use grain long for 60–90 ‑ g/m 2 (16–24 ‑ lb) paper.
  • Use only forms and letterhead printed using an offset lithographic or engraved printing process.
  • Avoid paper with rough or heavily textured surfaces.
  • Use inks that are not affected by the resin in toner. Inks that are oxidation ‑ set or oil ‑ based generally meet these requirements; latex inks might not.
  • Print samples on preprinted forms and letterheads considered for use before buying large quantities. This determines whether or not the ink in the preprinted form or letterhead will affect print quality.
  • When in doubt, contact your paper supplier.

Using recycled paper and other office papers

As an environmentally conscientious company, Lexmark supports the use of recycled paper produced specifically for use in laser (electrophotographic) printers.

While no blanket statement can be made that all recycled paper will feed well, Lexmark consistently tests papers that represent recycled cut size copier papers available on the global market. This scientific testing is conducted with rigor and discipline. Many factors are taken into consideration both separately and as a whole, including the following:

  • Amount of post-consumer waste (Lexmark tests up to 100% post-consumer waste content.)
  • Temperature and humidity conditions (Testing chambers simulate climates from all over the world.)
  • Moisture content (Business papers should have low moisture: 4–5%.)
  • Bending resistance and proper stiffness means optimum feeding through the printer.
  • Thickness (impacts how much can be loaded into a tray)
  • Surface roughness (measured in Sheffield units, impacts print clarity and how well toner fuses to the paper)
  • Surface friction (determines how easily sheets can be separated)
  • Grain and formation (impacts curling, which also influences the mechanics of how the paper behaves as it moves through the printer)
  • Brightness and texture (look and feel)

Recycled papers are better than ever; however, the amount of recycled content in a paper affects the degree of control over foreign matter. And while recycled papers are one good path to printing in an environmentally responsible manner, they are not perfect. The energy required to de-ink and deal with additives such as colorants and “glue” often generates more carbon emissions than does normal paper production. However, using recycled papers enables better resource management overall.

Page 182 of the Lexmark MS818 user manual — Storing paper
Page 182 · click to enlarge
Page 182

Paper and specialty media guide 182

Lexmark concerns itself with the responsible use of paper in general based on life cycle assessments of its products. To gain a better understanding of the impact of printers on the environment, the company commissioned a number of life cycle assessments and found that paper was identified as the primary contributor (up to 80%) of carbon emissions caused throughout the entire life of a device (from design to end-of-life). This is due to the energy-intensive manufacturing processes required to make paper.

Thus, Lexmark seeks to educate customers and partners on minimizing the impact of paper. Using recycled paper is one way. Eliminating excessive and unnecessary paper consumption is another. Lexmark is well- equipped to help customers minimize printing and copying waste. In addition, the company encourages purchasing paper from suppliers who demonstrate their commitment to sustainable forestry practices.

Lexmark does not endorse specific suppliers, although a converter’s product list for special applications is maintained. However, the following paper choice guidelines will help alleviate the environmental impact of printing:

1 Minimize paper consumption.

2 Be selective about the origin of wood fiber. Buy from suppliers who carry certifications such as the Forestry Stewardship Council (FSC) or The Program for the Endorsement of Forest Certification (PEFC). These certifications guarantee that the paper manufacturer uses wood pulp from forestry operators that employ environmentally and socially responsible forest management and restoration practices.

3 Choose the most appropriate paper for printing needs: normal 75 or 80 g/m2 certified paper, lower weight paper, or recycled paper.

Unacceptable paper examples

Test results indicate that the following paper types are at risk for use with laser printers:

  • Chemically treated papers used to make copies without carbon paper, also known as carbonless papers
  • Preprinted papers with chemicals that may contaminate the printer
  • Preprinted papers that can be affected by the temperature in the printer fuser
  • Preprinted papers that require a registration (the precise location on the page) greater than ± 2.3 mm (± 0.9 in.), such as optical character recognition (OCR) forms. In some cases, registration can be adjusted with a software application to successfully print on these forms.)
  • Coated papers (erasable bond), synthetic papers, thermal papers
  • Rough-edged, rough or heavily textured surface papers or curled papers
  • Recycled papers that fail EN12281:2002 (European testing)
  • Paper weighing less than 60 g/m 2 (16 lb)
  • Multiple part forms or documents

For more information about Lexmark, visit www.lexmark.com. General sustainability-related information can be found at the Environmental Sustainability link.

Storing paper

Use these paper storage guidelines to help avoid jams and uneven print quality:

  • For best results, store paper where the temperature is 21°C (70°F) and the relative humidity is 40 percent. Most label manufacturers recommend printing in a temperature range of 18–24°C (65–75°F) with relative humidity between 40 and 60 percent.
  • Store paper in cartons, on a pallet or shelf, rather than on the floor.
  • Store individual packages on a flat surface.
Page 183 of the Lexmark MS818 user manual — Paper sizes supported by the printer
Page 183 · click to enlarge
Page 183

Paper and specialty media guide 183

  • Do not store anything on top of individual paper packages.
  • Take paper out of the carton or wrapper only when you are ready to load it in the printer. The carton and wrapper help keep the paper clean, dry, and flat.

Supported paper sizes, types, and weights

The following tables provide information on standard and optional paper sources and the sizes, types, and weights of paper they support.

Paper types and weights supported by the printer

The printer engine supports 60–176‑g/m2 (16–47‑lb) paper weights.

Lexmark MS818 — Paper types and weights supported by the printer diagram (page 183)
Fig. 172 · Paper types and weights supported by the printer

Paper type 250‑ or 550‑sheet trays

* Print on transparencies by batches of only up to 20 to prevent them from sticking together. For more information, see “Tips on using transparencies” on page 179.

Paper sizes supported by the printer

Page 184 of the Lexmark MS818 user manual — Supported paper sizes, types, and weights
Page 184 · click to enlarge
Page 184

Paper and specialty media guide 184

Paper size1 Dimensions Standard or optional 250‑ or 550‑sheet tray

Optional 2100‑sheet tray Multipurpose feeder

A4 210 x 297 mm (8.3 x 11.7 in.)

A5 148 x 210 mm (5.8 x 8.3 in.)

A6 105 x 148 mm (4.1 x 5.8 in.)

JIS B5 182 x 257 mm (7.2 x 10.1 in.)

Letter 216 x 279 mm (8.5 x 11 in.)

Legal 216 x 356 mm (8.5 x 14 in.)

Executive 184 x 267 mm (7.3 x 10.5 in.)

Oficio 216 x 340 mm (8.5 x 13.4 in.)

Folio 216 x 330 mm (8.5 x 13 in.)

Statement 140 x 216 mm (5.5 x 8.5 in.)

Universal3 105 x 148 mm to 216 x 356 mm (4.13 x 5.83 in. to 8.5 x 14 in.)

70 x 127 mm to 216 x 356 mm (2.76 x 5 to 8.5 x 14 in.)

7 3/4 Envelope (Monarch)

98 x 191 mm (3.9 x 7.5 in.)

9 Envelope 98 x 225 mm (3.9 x 8.9 in.)

1 If your preferred default paper size cannot be set in the printer control panel, then you may select common paper sizes that correspond to the position of the length guide in the tray from the Paper Size/Type menu. If the paper size is not available, then select Universal or turn off tray size sensing. For more information, contact customer support.

2 Paper is supported in long‑edge orientation.

3 Universal is supported in duplex mode only if the width is from 105 mm (4.13 in.) to 216 mm (8.5 in.), and the length is from 148 mm (5.83 in.) to 356 mm (14 in.).

Duplex

Page 185 of the Lexmark MS818 user manual — Supported paper sizes
Page 185 · click to enlarge
Page 185

Paper and specialty media guide 185

Paper size1 Dimensions Standard or optional 250‑ or 550‑sheet tray

Optional 2100‑sheet tray Multipurpose feeder

10 Envelope 105 x 241 mm (4.1 x 9.5 in.)

DL Envelope 110 x 220 mm (4.3 x 8.7 in.)

C5 Envelope 162 x 229 mm (6.38 x 9.01 in.)

B5 Envelope 176 x 250 mm (6.93 x 9.84 in.)

Other Envelope 98 x 162 mm (3.9 x 6.4 in.) to 176 x 250 mm (6.9 x 9.8 in.)

1 If your preferred default paper size cannot be set in the printer control panel, then you may select common paper sizes that correspond to the position of the length guide in the tray from the Paper Size/Type menu. If the paper size is not available, then select Universal or turn off tray size sensing. For more information, contact customer support.

2 Paper is supported in long‑edge orientation.

3 Universal is supported in duplex mode only if the width is from 105 mm (4.13 in.) to 216 mm (8.5 in.), and the length is from 148 mm (5.83 in.) to 356 mm (14 in.).

Paper sizes, types, and weights supported by the output options

Supported paper sizes

Lexmark MS818 — Supported paper sizes diagram (page 185)
Fig. 173 · Supported paper sizes

Paper size 4‑bin mailbox Output expander and high‑capacity

1 The finisher staples the paper if it is loaded long edge first.

2 The finisher stacks the paper but does not staple or punch holes in it.

3 The finisher stacks and staples the paper but does not punch holes in it.

4 The finisher staples the paper if its width is from 210 mm (8.27 in.) to 217 mm (8.54 in.).

Duplex

Page 186 of the Lexmark MS818 user manual — Supported paper types and weights
Page 186 · click to enlarge
Page 186

Paper and specialty media guide 186

Lexmark MS818 — Paper sizes, types, and weights supported by the output options diagram (page 186)
Fig. 174 · Paper sizes, types, and weights supported by the out…

Paper size 4‑bin mailbox Output expander and high‑capacity

1 The finisher staples the paper if it is loaded long edge first.

2 The finisher stacks the paper but does not staple or punch holes in it.

3 The finisher stacks and staples the paper but does not punch holes in it.

4 The finisher staples the paper if its width is from 210 mm (8.27 in.) to 217 mm (8.54 in.).

Supported paper types and weights

Lexmark MS818 — Supported paper types and weights diagram (page 186)
Fig. 175 · Supported paper types and weights

Paper type Paper weight 4‑bin mailbox Output expander and

1 The finisher stacks the paper but does not staple or punch holes in it.

2 Print on transparencies by batches of only up to 20 to prevent them from sticking together. For more information, see “Tips on using transparencies” on page 179.

Page 187 of the Lexmark MS818 user manual — Paper sizes, types, and weights supported by the output options
Page 187 · click to enlarge
Page 187

Paper and specialty media guide 187

Lexmark MS818 — Paper sizes, types, and weights supported by the output options diagram (page 187)
Fig. 176 · Paper sizes, types, and weights supported by the out…

Paper type Paper weight 4‑bin mailbox Output expander and

1 The finisher stacks the paper but does not staple or punch holes in it.

2 Print on transparencies by batches of only up to 20 to prevent them from sticking together. For more information, see “Tips on using transparencies” on page 179.

Page 188 of the Lexmark MS818 user manual — Paper sizes, types, and weights supported by the output options
Page 188 · click to enlarge
Page 188

Paper and specialty media guide 188

Paper type Paper weight 4‑bin mailbox Output expander and

Staple finisher Staple, hole punch finisher

high‑capacity output expander

Rough/cotton 90–176 g/m2

(24–47 lb bond) X X X

Custom type [x] 90–176 g/m2

(24–47 lb bond) X X X

1 The finisher stacks the paper but does not staple or punch holes in it.

2 Print on transparencies by batches of only up to 20 to prevent them from sticking together. For more information, see “Tips on using transparencies” on page 179.

Show 4 more labels / short text on this page
60–90 g/m2 · (16–24 lb bond) · 60–90 g/m2 · (16–24 lb bond)
Page 189 of the Lexmark MS818 user manual — Understanding the printer menus
Page 189 · click to enlarge
Page 189

Understanding the printer menus 189

Understanding the printer menus

Menus list

Paper Menu Reports Network/Ports

Configure MP Substitute Size

Network Setup Page1

Parallel [x] Serial [x]

Custom Bin Names3

Security Settings Help Option Card Menu5

Edit Security Setups4

A list of installed DLEs (Download Emulators) appears.

Flash Drive Menu Print Settings

Print Quality Printing Guide

Miscellaneous Security Settings3

Erase Temporary Data Files

Information Guide Supplies Guide

Security Audit Log Set Date and Time

1 Depending on the printer setup, this menu item appears as Network Setup Page or Network [x] Setup Page.

2 Depending on the printer setup, this menu item appears as Standard Network or Network [x].

3 This menu appears only in touch‑screen printer models.

4 This menu appears only in some touch‑screen printer models.

5 This menu appears only when one or more DLEs are installed.

Show 24 more labels / short text on this page
Default Source · Menu Settings Page · Active NIC · Paper Size/Type · Device Statistics · Standard Network2 · Stapler Test · Standard USB · Paper Texture · Profiles List · Paper Weight · Print Fonts · SMTP Setup · Paper Loading · Print Directory · Custom Types · Asset Report · Custom Names3 · Universal Setup · Bin Setup · General Settings · Print All Guides · Confidential Print · Print Defects Guide
Page 190 of the Lexmark MS818 user manual — Paper Size/Type menu
Page 190 · click to enlarge
Page 190

Understanding the printer menus 190

Paper menu

Vinyl label is supported only in MS710 Series printer models.

Default Source menu

Set a default paper source for all print jobs.

Tray [x] Multipurpose Feeder1

  • Tray 1 (standard tray) is the factory default setting.
  • From the Paper menu, set Configure MP to "Cassette" for Multipurpose Feeder or MP Feeder to appear as a menu setting.
  • If two trays contain paper of the same size and type, and the trays have the same settings, then the trays are automatically linked. When one tray is empty, the print job continues using the linked tray.

Manual Paper Manual Envelope

1 This menu appears only in touch‑screen printer models.

2 This menu appears only in non‑touch‑screen printer models.

Paper Size/Type menu

Specify the paper size loaded in each tray.

A4 A5 A6 JIS‑B5 Letter Legal Executive Oficio (Mexico) Folio Statement Universal 7 3/4 Envelope 9 Envelope 10 Envelope DL Envelope C5 Envelope B5 Envelope Other Envelope

  • Letter is the U.S. factory default setting. A4 is the international factory default setting.
  • If two trays contain paper of the same size and type, and the trays have the same settings, then the trays are automatically linked. The multipurpose feeder may also be linked. When one tray is empty, the print job continues using the linked tray.
  • The A6 paper size is supported only in Tray 1 and in the multipurpose feeder.
Show 5 more labels / short text on this page
Use To · Default Source · MP Feeder2 · Use To · Tray [x] Size
Page 191 of the Lexmark MS818 user manual — Paper menu
Page 191 · click to enlarge
Page 191

Understanding the printer menus 191

Specify the paper type loaded in each tray.

Plain Paper Card Stock Transparency Recycled Labels Bond Envelope Rough Envelope Letterhead Preprinted Colored Paper Light Paper Heavy Paper Rough/Cotton Custom Type [x]

  • Plain Paper is the factory default setting for Tray 1. Custom Type [x] is the factory default setting for all other trays.
  • If available, a user ‑ defined name will appear instead of Custom Type [x].
  • Use this menu to configure automatic tray linking.

Specify the paper size loaded in the multipurpose feeder.

A4 A5 A6 JIS B5 Letter Legal Executive Oficio (Mexico) Folio Statement Universal 7 3/4 Envelope 9 Envelope 10 Envelope DL Envelope C5 Envelope B5 Envelope Other Envelope

  • Letter is the U.S. factory default setting. A4 is the international factory default setting.
  • From the Paper menu, set Configure MP to “Cassette” for MP Feeder Size to appear as a menu.
  • The multipurpose feeder does not automatically detect paper size. Make sure to set the paper size value.

Use To · Tray [x] Type · MP Feeder Size

Page 192 of the Lexmark MS818 user manual — Paper menu
Page 192 · click to enlarge
Page 192

Understanding the printer menus 192

Specify the paper type loaded in the multipurpose feeder.

Plain Paper Card Stock Transparency Recycled Labels Bond Envelope Rough Envelope Letterhead Preprinted Colored Paper Light Paper Heavy Paper Rough/Cotton Custom Type [x]

  • Plain Paper is the factory default setting.
  • From the Paper menu, set Configure to “Cassette” for MP Feeder Type to appear as a menu.

Specify the paper size being manually loaded.

A4 A5 A6 JIS B5 Letter Legal Executive Oficio (Mexico) Folio Statement Universal

Specify the paper type being manually loaded.

Plain Paper Card Stock Transparency Recycled Labels Bond Letterhead Preprinted Colored Paper Light Paper Heavy Paper Rough/Cotton Custom Type [x]

  • Plain Paper is the factory default setting.
  • From the Paper menu, set Configure MP to “Manual” for Manual Paper Type to appear as a menu.
Show 4 more labels / short text on this page
Use To · MP Feeder Type · Manual Paper Size · Manual Paper Type
Page 193 of the Lexmark MS818 user manual — Substitute Size menu
Page 193 · click to enlarge
Page 193

Understanding the printer menus 193

Specify the envelope size being manually loaded.

7 3/4 Envelope 9 Envelope 10 Envelope DL Envelope C5 Envelope B5 Envelope Other Envelope

Specify the envelope type being manually loaded.

Envelope Rough Envelope Custom Type [x]

Configure MP menu

Determine when the printer selects paper from the multipurpose feeder.

  • Cassette is the factory default setting. Cassette configures the multipurpose feeder as the automatic paper source.
  • Manual sets the multipurpose feeder only for manual ‑ feed print jobs.
  • First configures the multipurpose feeder as the primary paper source.

Substitute Size menu

Substitute a specified paper size if the requested paper size is not available.

Off Statement/A5 Letter/A4 All Listed

  • All Listed is the factory default setting. All available substitutions are allowed.
  • Off indicates that no size substitutions are allowed.
  • Setting a size substitution lets the print job continue without Change Paper appearing.
Show 8 more labels / short text on this page
Use To · Manual Envelope Size · Manual Envelope Type · Use To · Configure MP · Cassette Manual First · Use To · Substitute Size
Page 194 of the Lexmark MS818 user manual — Paper Texture menu
Page 194 · click to enlarge
Page 194

Understanding the printer menus 194

Paper Texture menu

Specify the relative texture of the plain paper loaded in a specific tray.

Specify the relative texture of the card stock loaded in a specific tray.

  • Normal is the factory default setting.
  • These options appear only if card stock is supported.

Specify the relative texture of the transparencies loaded in a specific tray.

Specify the relative texture of the recycled paper loaded in a specific tray.

Specify the relative texture of the labels loaded in a specific tray.

Specify the relative texture of the vinyl labels loaded in a specific tray.

Specify the relative texture of the bond paper loaded in a specific tray.

Specify the relative texture of the envelopes loaded in a specific tray.

Specify the relative texture of the rough envelopes loaded in a specific tray.

Specify the relative texture of the letterhead loaded in a specific tray.

Show 21 more labels / short text on this page
Use To · Plain Texture · Smooth Normal Rough · Card Stock Texture · Smooth Normal Rough · Transparency Texture · Smooth Normal Rough · Recycled Texture · Smooth Normal Rough · Labels Texture · Smooth Normal Rough · Vinyl Labels Texture · Smooth Normal Rough · Bond Texture · Smooth Normal Rough · Envelope Texture · Smooth Normal Rough · Rough Envelope Texture · Rough · Letterhead Texture · Smooth Normal Rough
Page 195 of the Lexmark MS818 user manual — Paper Weight menu
Page 195 · click to enlarge
Page 195

Understanding the printer menus 195

Specify the relative texture of the preprinted paper loaded in a specific tray.

Specify the relative texture of the colored paper loaded in a specific tray.

Specify the relative texture of the light paper loaded in a specific tray.

Specify the relative texture of the heavy paper loaded in a specific tray.

Specify the relative texture of the rough or cotton paper loaded in a specific tray.

Specify the relative texture of the custom paper loaded in a specific tray.

Paper Weight menu

Specify the relative weight of the plain paper loaded.

Specify the relative weight of the card stock loaded.

Specify the relative weight of the transparencies loaded.

Specify the relative weight of the recycled paper loaded.

Show 22 more labels / short text on this page
Use To · Preprinted Texture · Smooth Normal Rough · Colored Texture · Smooth Normal Rough · Light Texture · Smooth Normal Rough · Heavy Texture · Smooth Normal Rough · Rough/Cotton Texture · Rough · Custom [x] Texture · Smooth Normal Rough · Use To · Plain Weight · Light Normal Heavy · Card Stock Weight · Light Normal Heavy · Transparency Weight · Light Normal Heavy · Recycled Weight · Light Normal Heavy
Page 196 of the Lexmark MS818 user manual — Paper Weight menu
Page 196 · click to enlarge
Page 196

Understanding the printer menus 196

Specify the relative weight of the labels loaded.

Specify the relative weight of the vinyl labels loaded.

Specify the relative weight of the bond paper loaded.

Specify the relative weight of the envelope loaded.

Specify the relative weight of the rough envelope loaded.

Specify the relative weight of the letterhead loaded.

Specify the relative weight of the preprinted paper loaded.

Specify the relative weight of the colored paper loaded.

Specify that the weight of the paper loaded is light.

Specify that the weight of the paper loaded is heavy.

Specify the relative weight of the cotton or rough paper loaded.

Show 23 more labels / short text on this page
Use To · Labels Weight · Light Normal Heavy · Vinyl Labels Weight · Light Normal Heavy · Bond Weight · Light Normal Heavy · Envelope Weight · Light Normal Heavy · Rough Envelope Weight · Light Normal Heavy · Letterhead Weight · Light Normal Heavy · Preprinted Weight · Light Normal Heavy · Colored Weight · Light Normal Heavy · Light Weight · Light · Heavy Weight · Heavy · Rough/Cotton Weight · Light Normal Heavy
Page 197 of the Lexmark MS818 user manual — Paper Loading menu
Page 197 · click to enlarge
Page 197

Understanding the printer menus 197

Specify the relative weight of the custom paper loaded.

  • Normal is the factory default setting.
  • The options appear only when the custom type is supported.

Paper Loading menu

Determine and set two-sided printing for all print jobs with Card Stock as the paper type.

Determine and set two-sided printing for all print jobs with Recycled as the paper type.

Determine and set two-sided printing for all print jobs with Labels as the paper type.

Determine and set two-sided printing for all print jobs with Vinyl Labels as the paper type.

Determine and set two-sided printing for all print jobs with Bond as the paper type.

Determine and set two-sided printing for all print jobs with Letterhead as the paper type.

Determine and set two-sided printing for all print jobs with Preprinted as the paper type.

Determine and set two-sided printing for all print jobs with Colored as the paper type.

Determine and set two-sided printing for all print jobs with Light as the paper type.

  • Off is the factory default setting for all Paper Loading menu selections.
  • Duplex sets the printer default to two ‑ sided printing for every print job unless one ‑ sided printing is selected from Print Properties or the print dialog, depending on your operating system.
Show 22 more labels / short text on this page
Use To · Custom [x] Weight · Light Normal Heavy · Use To · Card Stock Loading · Duplex Off · Recycled Loading · Duplex Off · Labels Loading · Duplex Off · Vinyl Labels Loading · Duplex Off · Bond Loading · Duplex Off · Letterhead Loading · Duplex Off · Preprinted Loading · Duplex Off · Colored Loading · Duplex Off · Light Loading · Duplex Off
Page 198 of the Lexmark MS818 user manual — Custom Names menu
Page 198 · click to enlarge
Page 198

Understanding the printer menus 198

Determine and set two-sided printing for all print jobs with Heavy as the paper type.

Determine and set two-sided printing for all print jobs with Rough or Cotton as the paper type.

Determine and set two-sided printing for all print jobs with Custom [x] as the paper type.

  • Off is the factory default setting for all Paper Loading menu selections.
  • Duplex sets the printer default to two ‑ sided printing for every print job unless one ‑ sided printing is selected from Print Properties or the print dialog, depending on your operating system.

Custom Types menu

Associate a paper or specialty media type with a factory default custom type name or a user‑defined custom name created from the Embedded Web Server or from MarkVisionTM Professional.

Paper Card Stock Transparency Rough/Cotton Labels Vinyl Labels Envelope

  • Paper is the factory default setting.
  • The custom media type must be supported by the selected tray or multipurpose feeder in order to print from that source.

Specify a paper type when Recycled is selected in other menus.

Paper Card Stock Transparency Rough/Cotton Labels Vinyl Labels Envelope

  • Paper is the factory default setting.
  • The custom media type must be supported by the selected tray or multipurpose feeder in order to print from that source.

Custom Names menu

Custom Name [x] Specify a custom name for a paper type. This name replaces the Custom Type [x] name in the printer menus.

Show 11 more labels / short text on this page
Use To · Heavy Loading · Duplex Off · Rough/Cotton Loading · Duplex Off · Custom [x] Loading · Duplex Off · Use To · Custom Type [x] · Recycled · Use To
Page 199 of the Lexmark MS818 user manual — Universal Setup menu
Page 199 · click to enlarge
Page 199

Understanding the printer menus 199

Custom Bin Names menu

Standard Bin Specify a custom name for the standard bin.

Bin [x] Specify a custom name for Bin [x].

Universal Setup menu

Identify the units of measure.

  • Inches is the U.S. factory default setting.
  • Millimeters is the international factory default setting.

Set the portrait width.

3–14.17 inches 76–360 mm

  • If the width exceeds the maximum, then the printer uses the maximum width allowed.
  • 8.5 inches is the U.S. factory default setting. You can increase the width in 0.01 ‑ inch increments.
  • 216 mm is the international factory default setting. You can increase the width in 1 ‑ mm increments.

Set the portrait height.

3–14.17 inches 76–360 mm

  • If the height exceeds the maximum, then the printer uses the maximum height allowed.
  • 14 inches is the U.S. factory default setting. You can increase the height in 0.01 ‑ inch increments.
  • 356 mm is the international factory default setting. You can increase the height in 1 ‑ mm increments.

Specify the feed direction if the paper can be loaded in either direction.

Short Edge Long Edge

  • Short Edge is the factory default setting.
  • Long Edge appears only when the longest edge is shorter than the maximum width supported in the tray.
Show 7 more labels / short text on this page
Use To · Use To · Units of Measure · Inches Millimeters · Portrait Width · Portrait Height · Feed Direction
Page 200 of the Lexmark MS818 user manual — Bin Setup menu
Page 200 · click to enlarge
Page 200

Understanding the printer menus 200

Bin Setup menu

Specify the default bin.

Standard Bin Bin [x]

  • If multiple bins are assigned the same name, then the name appears only once in the menu.
  • Standard Bin is the factory default setting.

Specify configuration options for bins.

Mailbox Link Mail Overflow Link Optional Type Assignment

  • Mailbox is the factory default setting. This setting treats each bin as a separate mailbox.
  • Link configures all available bins as one large bin.
  • Mail Overflow configures each bin as a separate mailbox.
  • Link Optional links all available bins except the standard bin and only appears when at least two optional bins are installed.
  • Type Assignment assigns each paper type to a bin or linked bin set.
  • Bins assigned the same name are automatically linked unless Link Optional is selected.

Specify an alternative bin when a designated bin is full.

Standard Bin Bin [x]

  • Standard Bin is the factory default setting.
  • If multiple bins are assigned the same name, then the name only appears once in the bin list.
  • [x] can be any number between 1 and 12 if the appropriate optional bins are installed.
Show 4 more labels / short text on this page
Use To · Output Bin · Configure Bins · Overflow Bin
Page 201 of the Lexmark MS818 user manual — Reports menu
Page 201 · click to enlarge
Page 201

Understanding the printer menus 201

Select a bin for each supported paper type.

Plain Paper Bin Card Stock Bin Transparency Bin Recycled Bin Labels Bin Vinyl Labels Bin Bond Bin Envelope Bin Rough Envelope Bin Letterhead Bin Preprinted Bin Colored Bin Light Paper Bin Heavy Paper Bin Rough/Cotton Bin Custom [x] Bin

For each type, select the following options:

Disabled Standard Bin Bin [x]

  • Disabled is the factory default setting.
  • [x] can be any number between 1 and 12 if the appropriate optional bins are installed.
  • If multiple bins are assigned the same name, then the name only appears once in the bin list.

Reports menu

Reports menu

Menu Settings Page Print a report containing information about the paper loaded in trays, installed memory, total page count, alarms, timeouts, printer control panel language, TCP/IP address, status of supplies, status of the network connection, and other information.

Device Statistics Print a report containing printer statistics such as supply information and details about printed pages.

Stapler Test Print a report that confirms that the staple finisher is functioning properly.

Network Setup Page Print a report containing information about the network printer settings, such as the TCP/IP address information.

Network [x] Setup Page Print a report containing information about the network printer settings, such as the TCP/IP address information.

  • This menu item is available only when more than one network option is installed.
  • This menu item appears only in network printers or in printers connected to print servers.

Use To · Assign Type/Bin · Use To

Page 202 of the Lexmark MS818 user manual — Standard Network or Network [x] menu
Page 202 · click to enlarge
Page 202

Understanding the printer menus 202

Profiles List Print a list of profiles stored in the printer.

Print a report of all the fonts available for the printer language currently set in the printer.

PCL Fonts PostScript Fonts

Print Directory Print a list of all the resources stored in an optional flash memory card or printer hard disk.

  • Job Buffer Size must be set to 100%.
  • Make sure the optional flash memory or printer hard disk is installed correctly and working properly.
  • This menu item appears only when an optional flash drive or printer hard disk is installed.

Asset Report Print a report containing printer asset information, such as serial number and model name.

Network/Ports menu

Active NIC menu

Allow the printer to connect to a network.

Auto [list of available network cards]

  • Auto is the factory default setting.
  • This menu item appears only if an optional network adapter is installed.

Standard Network or Network [x] menu

Reduce power consumption when the printer receives no data from the Ethernet network.

Show 7 more labels / short text on this page
Use To · Print Fonts · Use To · Active NIC · Use To · Energy Efficient Ethernet · Enable Disable
Page 203 of the Lexmark MS818 user manual — Network/Ports menu
Page 203 · click to enlarge
Page 203

Understanding the printer menus 203

Set the printer to automatically switch to PCL emulation when a print job requires it, regardless of the default printer language.

  • On is the factory default setting.
  • If PCL SmartSwitch is disabled, then the printer does not examine incoming data and it uses the default printer language specified in the Setup menu.

Set the printer to automatically switch to PS emulation when a print job requires it, regardless of the default printer language.

  • On is the factory default setting.
  • If PS SmartSwitch is disabled, then the printer does not examine incoming data and it uses the default printer language specified in the Setup menu.

Set the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol.

  • Auto is the factory default setting.
  • The printer automatically restarts when the setting is changed from the control panel.

Set the size of the network input buffer.

Auto 3KB to [maximum size allowed]

  • Auto is the factory default setting.
  • The maximum size allowed depends on the amount of memory in the printer, the size of the other link buffers, and whether Resource Save is set to On or Off.
  • To increase the maximum size range for the Network Buffer, disable or reduce the size of the parallel, serial, and USB buffers.
  • The printer automatically restarts when the setting is changed from the control panel.

Temporarily store print jobs in the printer hard disk before printing. This menu only appears when a formatted disk is installed.

  • Off is the factory default setting.
  • The printer automatically restarts when the setting is changed from the control panel. The menu selection is then updated.

Set the printer to process Macintosh binary PostScript print jobs.

Show 12 more labels / short text on this page
Use To · PCL SmartSwitch · On Off · PS SmartSwitch · On Off · NPA Mode · Off Auto · Network Buffer · Job Buffering · Off On Auto · Mac Binary PS · On Off Auto
Page 204 of the Lexmark MS818 user manual — UAA LAA
Page 204 · click to enlarge
Page 204

Understanding the printer menus 204

Standard Network Setup OR Network [x] Setup

Show and set the printer network settings.

Reports Network Card TCP/IP IPv6 Wireless AppleTalk

Reports menu

To access the menu, navigate to either of the following:

  • Network/Ports > Standard Network > Standard Network Setup > Reports
  • Network/Ports > Network [x] > Network [x] Setup > Reports

Print Setup Page Print a report containing information about the network printer settings, such as the TCP/IP

address.

Network Card menu

To access the menu, navigate to either of the following:

  • Network/Ports > Standard Network > Standard Network Setup > Network Card
  • Network/Ports > Network [x] > Network [x] Setup > Network Card

View the connection status of the wireless network adapter.

View Card Speed View the speed of an active wireless network adapter.

View the network addresses.

UAA LAA

Set the amount of time it takes for a network print job to be canceled.

  • “90 seconds” is the factory default setting.
  • A setting value of 0 disables the timeout.
  • If a value between 1 and 9 is selected, then Invalid appears on the display, and the value is not saved.

Allow the printer to print a banner page.

Show 10 more labels / short text on this page
Use To · Use To · Use To · View Card Status · Connected Disconnected · Network Address · Job Timeout · 0, 10–225 seconds · Banner Page · Off On
Page 205 of the Lexmark MS818 user manual — TCP/IP menu
Page 205 · click to enlarge
Page 205

Understanding the printer menus 205

TCP/IP menu

To access the menu, navigate to either of the following:

  • Network/Ports > Standard Network > Standard Network Setup > TCP/IP
  • Network/Ports > Network [x] > Network [x] Setup > TCP/IP

Set Hostname Set the current TCP/IP host name.

IP Address View or change the current TCP/IP address.

Netmask View or change the current TCP/IP netmask.

Gateway View or change the current TCP/IP gateway.

Specify the DHCP address and parameter assignment.

Specify the RARP address assignment setting.

Specify the BOOTP address assignment setting.

Specify the Zero Configuration Networking setting.

Enable the built-in FTP server, which lets you send files to the printer using File Transfer Protocol.

Enable the built-in Web server (Embedded Web Server). When enabled, the printer can be monitored and managed remotely using a Web browser.

WINS Server Address View or change the current WINS server address.

View or change the current DDNS setting.

View or change the current mDNS setting.

DNS Server Address View or change the current DNS server address.

Show 17 more labels / short text on this page
Use To · Enable DHCP · On Off · Enable RARP · On Off · Enable BOOTP · On Off · Enable AutoIP · Yes No · Enable FTP/TFTP · Yes No · Enable HTTP Server · Yes No · Enable DDNS · Yes No · Enable mDNS · Yes No
Page 206 of the Lexmark MS818 user manual — Wireless menu
Page 206 · click to enlarge
Page 206

Understanding the printer menus 206

Backup DNS Server Address View or change the backup DNS server addresses.

Backup DNS Server Address 2

Backup DNS Server Address 3

View or change the current HTTPS setting.

IPv6 menu

To access the menu, navigate to any of the following:

  • Network/Ports menu > Standard Network > Standard Network Setup > IPv6
  • Network/Ports menu > Network [x] > Network [x] Setup > IPv6

Enable IPv6 in the printer.

Specify whether or not the network adapter accepts the automatic IPv6 address configuration entries provided by a router.

Set Hostname Set the host name.

Enable DHCPv6 in the printer.

Wireless menu

To access the menu, navigate to:

Network/Ports > Network [x] > Network [x] Setup > Wireless

Show 11 more labels / short text on this page
Use To · Enable HTTPS · Yes No · Use To · Enable IPv6 · On Off · Auto Configuration · On Off · View Router Address · Enable DHCPv6 · On Off
Page 207 of the Lexmark MS818 user manual — AppleTalk menu
Page 207 · click to enlarge
Page 207

Understanding the printer menus 207

Wi‑Fi Protected Setup

Establish a wireless network and enable network security.

Start Push Button Method Start PIN Method

  • Start Push Button Method connects the printer to a wireless network when buttons on both the printer and the access point (wireless router) are pressed within a given period of time.
  • Start PIN Method connects the printer to a wireless network when a PIN on the printer is entered into the wireless settings of the access point.

Enable/Disable WPS Auto‑detection

Automatically detect the connection method that an access point with WPS uses—Start Push Button Method or Start PIN Method.

Network Mode BSS Type

Specify the network mode.

  • Infrastructure is the factory default setting. This lets the printer access a network using an access point.
  • Ad hoc configures wireless connection directly between the printer and a computer.

Specify the wireless standard for the wireless network.

802.11b/g 802.11b/g/n

Choose Network Select an available network for the printer to use.

View Signal Quality View the quality of the wireless connection.

View Security Mode View the encryption method for the wireless network.

AppleTalk menu

To access the menu, navigate to either of the following:

  • Network/Ports > Standard Network > Standard Network Setup > AppleTalk
  • Network/Ports > Network [x] > Network [x] Setup > AppleTalk

Enable or disable AppleTalk support.

View Name Show the assigned AppleTalk name.

View Address Show the assigned AppleTalk address.

Show 7 more labels / short text on this page
Use To · Enable Disable · Infrastructure Ad hoc · Compatibility · Use To · Activate · Yes No
Page 208 of the Lexmark MS818 user manual — Standard USB menu
Page 208 · click to enlarge
Page 208

Understanding the printer menus 208

Provide a list of AppleTalk zones available on the network.

[list of zones available on the network]

Standard USB menu

Set the printer to automatically switch to PCL emulation when a print job received through a USB port requires it, regardless of the default printer language.

  • On is the factory default setting.
  • When set to Off, the printer does not examine incoming data. The printer uses PostScript emulation if the PS SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if the PS SmartSwitch is set to Off.

Set the printer to automatically switch to PS emulation when a print job received through a USB port requires it, regardless of the default printer language.

  • On is the factory default setting.
  • When set to Off, the printer does not examine incoming data. The printer uses PCL emulation if the PCL SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if the PCL SmartSwitch is set to Off.

Set the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol.

  • Auto is the factory default setting. Auto sets the printer to examine data, determine the format, and then process it appropriately.
  • The printer automatically restarts when changing the setting from the printer control panel. The menu selection is then updated.
Show 9 more labels / short text on this page
Use To · Set Zone · Use To · PCL SmartSwitch · On Off · PS SmartSwitch · On Off · NPA Mode · On Off Auto
Page 209 of the Lexmark MS818 user manual — Parallel [x] menu
Page 209 · click to enlarge
Page 209

Understanding the printer menus 209

Set the size of the USB input buffer.

Disabled Auto 3K to [maximum size allowed]

  • Auto is the factory default setting.
  • Disabled turns off job buffering. Any jobs already buffered on the printer hard disk are printed before normal processing resumes.
  • The USB buffer size value can be changed in 1-K increments.
  • The maximum size allowed depends on the amount of memory in the printer, the size of the other link buffers, and whether Resource Save is set to On or Off.
  • To increase the maximum size range for the USB Buffer, disable or reduce the size of the parallel, serial, and network buffers.
  • The printer automatically restarts when the setting is changed from the printer control panel. The menu selection is then updated.

Temporarily store print jobs in the printer hard disk before printing.

  • Off is the factory default setting.
  • On buffers jobs on the printer hard disk.
  • Auto buffers print jobs only if the printer is busy processing data from another input port.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is then updated.

Set the printer to process Macintosh binary PostScript print jobs.

  • Auto is the factory default setting.
  • On processes raw binary PostScript print jobs.
  • Off filters print jobs using the standard protocol.

Set the network address information for an external print server.

yyy.yyy.yyy.yyy

Set the netmask information for an external print server.

yyy.yyy.yyy.yyy

Set the gateway information for an external print server.

yyy.yyy.yyy.yyy

Parallel [x] menu

Show 9 more labels / short text on this page
Use To · USB Buffer · Job Buffering · Off On Auto · Mac Binary PS · On Off Auto · ENA Address · ENA Netmask · ENA Gateway
Page 210 of the Lexmark MS818 user manual — Parallel [x] menu
Page 210 · click to enlarge
Page 210

Understanding the printer menus 210

Set the printer to automatically switch to PCL emulation when a print job received through a serial port requires it, regardless of the default printer language.

  • On is the factory default setting.
  • When set to Off, the printer does not examine incoming data. The printer uses PostScript emulation if PS SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if PS SmartSwitch is set to Off.

Set the printer to automatically switch to PS emulation when a print job received through a serial port requires it, regardless of the default printer language.

  • On is the factory default setting.
  • When set to Off, the printer does not examine incoming data. The printer uses PCL emulation if PCL SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if PCL SmartSwitch is set to Off.

Set the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol.

  • Auto is the factory default setting.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is then updated.

Set the size of the parallel input buffer.

Disabled Auto 3K to [maximum size allowed]

  • Auto is the factory default setting.
  • Disabled turns off job buffering. Any print jobs already buffered on the printer hard disk are printed before normal processing resumes.
  • The parallel buffer size setting can be changed in 1 ‑ KB increments.
  • The maximum size allowed depends on the amount of memory in the printer, the size of the other link buffers, and whether Resource Save is set to On or Off.
  • To increase the maximum size range for the Parallel Buffer, disable or reduce the size of the USB, serial, and network buffers.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is then updated.
Show 8 more labels / short text on this page
Use To · PCL SmartSwitch · On Off · PS SmartSwitch · On Off · NPA Mode · On Off Auto · Parallel Buffer
Page 211 of the Lexmark MS818 user manual — Parallel [x] menu
Page 211 · click to enlarge
Page 211

Understanding the printer menus 211

Temporarily store print jobs on the printer hard disk before printing.

  • Off is the factory default setting.
  • On buffers print jobs on the printer hard disk.
  • Auto buffers print jobs only if the printer is busy processing data from another input port.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is then updated.

Enable bidirectional communication through the parallel port.

  • On is the factory default setting.
  • Off disables parallel port negotiation.

Specify the parallel port protocol.

  • Fastbytes is the factory default setting. It provides compatibility with most existing parallel ports and is the recommended setting.
  • Standard tries to resolve parallel port communication problems.

Determine if the printer honors printer hardware initialization requests from the computer.

  • Off is the factory default setting.
  • The computer requests initialization by activating the Init signal from the parallel port. Many personal computers activate the Init signal each time the computer is turned on.

Determine if the parallel port data is sampled on the leading or trailing edge of a strobe.

Set the printer to process Macintosh binary PostScript print jobs.

  • Auto is the factory default setting.
  • Off filters print jobs using the standard protocol.
  • On processes raw binary PostScript print jobs.

Set the network address information for an external print server.

yyy.yyy.yyy.yyy

Set the netmask information for an external print server.

yyy.yyy.yyy.yyy

Show 15 more labels / short text on this page
Use To · Job Buffering · Off On Auto · Advanced Status · On Off · Protocol · Standard Fastbytes · Honor Init · On Off · Parallel Mode 2 · On Off · Mac Binary PS · On Off Auto · ENA Address · ENA Netmask
Page 212 of the Lexmark MS818 user manual — Serial [x] menu
Page 212 · click to enlarge
Page 212

Understanding the printer menus 212

Set the gateway information for an external print server.

yyy.yyy.yyy.yyy

Serial [x] menu

Set the printer to automatically switch to PCL emulation when a print job received through a serial port requires it, regardless of the default printer language.

  • On is the factory default setting.
  • When set to Off, the printer does not examine incoming data. The printer uses PostScript emulation if PS SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if PS SmartSwitch is set to Off.

Set the printer to automatically switch to PS emulation when a print job received through a serial port requires it, regardless of the default printer language.

  • On is the factory default setting.
  • When set to Off, the printer does not examine incoming data. The printer uses PCL emulation if PCL SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if PCL SmartSwitch is set to Off.

Set the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol.

  • Auto is the factory default setting. Auto sets the printer to examine data, determine the format, and then processes it appropriately.
  • When set to On, the printer performs NPA processing. If the data is not in NPA format, it is rejected as bad data.
  • When set to Off, the printer does not perform NPA processing.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is then updated.
Show 9 more labels / short text on this page
Use To · ENA Gateway · Use To · PCL SmartSwitch · On Off · PS SmartSwitch · On Off · NPA Mode · On Off Auto
Page 213 of the Lexmark MS818 user manual — DTR DTR/DSR XON/XOFF XON/XOFF/DTR XONXOFF/DTRDSR
Page 213 · click to enlarge
Page 213

Understanding the printer menus 213

Set the size of the serial input buffer.

Disabled Auto 3K to [maximum size allowed]

  • Auto is the factory default setting.
  • Disabled turns off job buffering. Any jobs already buffered on the disk are printed before normal processing is resumed.
  • The serial buffer size setting can be changed in 1 ‑ KB increments.
  • The maximum size allowed depends on the amount of memory in the printer, the size of the other link buffers, and whether Resource Save is set to On or Off.
  • To increase the maximum size range for the Serial Buffer, disable or reduce the size of the parallel, serial, and network buffers.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is then updated.

Temporarily store print jobs on the printer hard disk before printing.

  • Off is the factory default setting. The printer does not buffer print jobs on the printer hard disk.
  • On buffers print jobs on the printer hard disk.
  • Auto buffers print jobs only if the printer is busy processing data from another input port.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is then updated.

Select the hardware and software handshaking settings for the serial port.

DTR DTR/DSR XON/XOFF XON/XOFF/DTR XONXOFF/DTRDSR

  • DTR is the factory default setting.
  • DTR/DSR is a hardware handshaking setting.
  • XON/XOFF is a software handshaking setting.
  • XON/XOFF/DTR and XON/XOFF/DTR/DSR are combined hardware and software handshaking settings.

Determine whether the printer communicates availability to the computer.

  • Off is the factory default setting.
  • This menu item applies only to the serial port if Serial Protocol is set to XON/XOFF.
Show 7 more labels / short text on this page
Use To · Serial Buffer · Job Buffering · Off On Auto · Protocol · Robust XON · On Off
Page 214 of the Lexmark MS818 user manual — SMTP Setup menu
Page 214 · click to enlarge
Page 214

Understanding the printer menus 214

Specify the rate at which data can be received through the serial port.

1200 2400 4800 9600 19200 38400 57600 115200 138200 172800 230400 345600

  • 9600 is the factory default setting.
  • 138200, 172800, 230400, and 345600 baud rates are only displayed in the Standard Serial menu. These settings do not appear in the Serial Option 1, Serial Option 2, or Serial Option 3 menus.

Specify the number of data bits sent in each transmission frame.

Set the parity for serial input and output data frames.

Even Odd None Ignore

Determine whether the printer uses the DSR Signal.

  • Off is the factory default setting.
  • DSR is a handshaking signal used by most serial cables. The serial port uses DSR to distinguish data sent by the computer from data created by electrical noise in the serial cable. The electrical noise can cause stray characters to print. Set this to On to prevent stray characters from printing.

SMTP Setup menu

Primary SMTP Gateway Specify SMTP server gateway and port information.

Secondary SMTP Gateway Port

5–30 Specify the amount of time in seconds before the server stops trying to send an e‑mail.

Reply Address Specify a reply address of up to 128 characters in the e-mail sent by the printer.

Show 9 more labels / short text on this page
Use To · Baud · Data Bits · Parity · Honor DSR · On Off · Use To · Secondary SMTP Gateway · SMTP Timeout
Page 215 of the Lexmark MS818 user manual — Edit Security Setups menu
Page 215 · click to enlarge
Page 215

Understanding the printer menus 215

Set the printer to use SSL for increased security when connecting to the SMTP server.

  • Disabled is the factory default setting.
  • When the Negotiate setting is used, the SMTP server determines if SSL will be used.

Specify the type of user authentication required for printing privileges.

No authentication required Login/Plain CRAM‑MD5 Digest‑MD5 NTLM Kerberos 5

Device‑Initiated E‑mail

Specify what credentials will be used when communicating to the SMTP server. Some SMTP servers require credentials to send an e- mail.

None Use Device SMTP Credentials

User‑Initiated E‑mail

  • None is the factory default setting for Device ‑ Initiated E ‑ mail and User ‑ Initiated E ‑ mail.
  • Device Userid and Device Password are used to log in to the SMTP server when Use Device SMTP Credentials is selected.
  • User ‑ Initiated E ‑ mail, Kerberos 5 Realm, and NTLM Domain appear only in touch ‑ screen printer models.

None Use Device SMTP Credentials Use Session User ID & Password Use Session E‑mail address & Password Prompt User

Security menu

Edit Security Setups menu

Create a backup password.

  • Off
  • On Password
  • Off is the factory default setting for “Use Backup Password.”
  • This menu appears only if a backup password exists.
Show 11 more labels / short text on this page
Use To · Use SSL · Disabled Negotiate Required · SMTP Server Authentication · Device Userid · Device Password · Kerberos 5 Realm · NTLM Domain · Use To · Edit Backup Password · Use Backup Password
Page 216 of the Lexmark MS818 user manual — Miscellaneous Security Settings menu
Page 216 · click to enlarge
Page 216

Understanding the printer menus 216

Edit settings for Internal Accounts, NTLM, Simple Kerberos Setup, Kerberos Setup, Active Directory, LDAP, Password, and PIN.

Internal Accounts NTLM Simple Kerberos Setup Kerberos Setup Active Directory LDAP LDAP+GSSAPI Password PIN

Add or edit a security template.

[list of available templates]

Control access to printer menus, firmware updates, held jobs, and other access points.

Administrative Menus Function Access Management Solutions Cancel jobs at the Device

Miscellaneous Security Settings menu

Limit the number and time frames of failed login attempts from the printer control panel before all users are locked out.

Login failures Failure time frame Lockout time Panel Login Timeout Remote Login Timeout

  • “Login failures” specifies the number of failed login attempts before users are locked out. Settings range from 1 to 10. 3 attempts is the factory default setting.
  • “Failure time frame” specifies the time frame during which failed login attempts can be made before users are locked out. Settings range from 1 to 60 minutes. 5 minutes is the factory default setting.
  • “Lockout time” specifies how long users are locked out after exceeding the login failures limit. Settings range from 1 to 60 minutes. 5 minutes is the factory default setting.
  • Panel Login Timeout specifies how long the printer remains idle on the printer control panel before automatically logging the user off. Settings range from 1 to 900 seconds. 30 seconds is the factory default setting.
  • Remote Login Timeout specifies how long a remote interface remains idle before automatically logging the user off. Settings range from 1 to 120 seconds. 10 minutes is the factory default setting.

1–16 Limit the digit length of the PIN.

Show 7 more labels / short text on this page
Use To · Edit Building Blocks · Edit Security Templates · Edit Access Controls · Use To · Login Restrictions · Minimum PIN Length
Page 217 of the Lexmark MS818 user manual — Erase Temporary Data Files menu
Page 217 · click to enlarge
Page 217

Understanding the printer menus 217

Confidential Print menu

Limit the number of times an invalid PIN can be entered.

  • This menu appears only when a formatted, non-defective printer hard disk is installed.
  • Once the limit is reached, the print jobs for that user name and PIN are deleted.

Limit the amount of time a confidential print job stays in the printer before it is deleted.

Off 1 hour 4 hours 24 hours 1 week

  • If the “Confidential Job Expiration” setting is changed while confidential print jobs reside in the printer RAM or printer hard disk, then the expiration time for those print jobs does not change to the new default value.
  • If the printer is turned off, then all confidential jobs held in the printer RAM are deleted.

Set a time limit on how long the printer stores print jobs.

Off 1 hour 4 hours 24 hours 1 week

Set a time limit on how long the printer stores print jobs needing verification.

Off 1 hour 4 hours 24 hours 1 week

Set a time limit on how long the printer stores print jobs for printing at a later time.

Off 1 hour 4 hours 24 hours 1 week

Erase Temporary Data Files menu

Erase Temporary Data Files deletes only print job data on the printer hard disk that are not currently in use by the file system. All permanent data on the printer hard disk are preserved, such as downloaded fonts, macros, and held jobs.

Show 7 more labels / short text on this page
Use To · Max Invalid PIN · Off 2–10 · Confidential Job Expiration · Repeat Job Expiration · Verify Job Expiration · Reserve Job Expiration
Page 218 of the Lexmark MS818 user manual — Set Date and Time menu
Page 218 · click to enlarge
Page 218

Understanding the printer menus 218

Specify the mode for erasing temporary data files.

Mark all disk space used by a previous print job. This method does not permit the file system to reuse this space until it has been cleared.

Single pass Multiple pass

  • “Single pass” is the factory default setting.
  • Only automatic wiping enables users to erase temporary data files without having to turn off the printer for an extended amount of time.
  • Highly confidential information should be erased using only the Multiple pass method.

Security Audit Log menu

Export Log Let an authorized user export the audit log.

  • To export the audit log from the printer control panel, a flash drive must be attached to the printer.
  • The audit log can be downloaded from the Embedded Web Server and saved on a computer.

Specify whether or not audit logs are deleted.

Specify how and whether or not audit logs are created.

Yes No Enable Remote Syslog

  • Enable Audit determines if events are recorded in the secure audit log and remote syslog. No is the factory default setting.
  • Enable Remote Syslog determines if logs are sent to a remote server. No is the factory default setting.
  • Remote Syslog Facility determines the value used to send logs to the remote syslog server. 4 is the factory default setting.
  • If the security audit log is activated, then the severity value of each event is recorded. 4 is the factory default setting.

No Yes Remote Syslog Facility

0–23 Severity of events to log

Set Date and Time menu

Current Date and Time Show the current date and time settings for the printer.

Show 10 more labels / short text on this page
Use To · Wiping Mode · Auto · Automatic Method · Use To · Delete Log · Yes No · Configure Log · Enable Audit · Use To
Page 219 of the Lexmark MS818 user manual — Security Audit Log menu
Page 219 · click to enlarge
Page 219

Understanding the printer menus 219

Manually Set Date and Time

Enter the date and time.

  • Manually setting the date and time sets Enable NTP to No.
  • The wizard lets you set the date and time in YYYY ‑ MM ‑ DD ‑ HH:MM format.

Select the time zone.

[list of time zones]

Set the printer to use the applicable daylight saving time (DST) start and end times associated with the printer Time Zone setting.

Enable Network Time Protocol, which synchronizes the clocks of devices on a network.

  • On is the factory default setting.
  • The setting is turned off if you manually set the date and time.
Show 7 more labels / short text on this page
Use To · [input date/time] · Time Zone · Automatically observe DST · On Off · Enable NTP · On Off
Page 220 of the Lexmark MS818 user manual — General Settings menu
Page 220 · click to enlarge
Page 220

Understanding the printer menus 220

Settings menu

General Settings menu

Set the language of the text that appears on the display.

English Francais Deutsch Italiano Espanol Dansk Norsk Nederlands Svenska Portuguese Suomi Russian Polski Greek Magyar Turkce Cesky Simplified Chinese Traditional Chinese Korean Japanese

View supply estimates on the control panel, Embedded Web Server, menu settings, and device statistics reports.

Show estimates Do not show estimates

Minimize the use of energy, paper, or specialty media.

Off Energy Energy/Paper Paper

  • Off is the factory default setting.
  • Setting Eco-Mode to Energy or Paper may affect printer performance, but not print quality.

Reduce printer noise.

Run the setup wizard.

Show 8 more labels / short text on this page
Use To · Display Language · Show Supply Estimates · Eco-Mode · Quiet Mode · Off On · Run Initial Setup · Yes No
Page 221 of the Lexmark MS818 user manual — Settings menu
Page 221 · click to enlarge
Page 221

Understanding the printer menus 221

Specify a language and custom key information for the keyboard on the display.

English Francais Francais Canadien Deutsch Italiano Espanol Greek Dansk Norsk Nederlands Svenska Suomi Portuguese Russian Polski Swiss German Swiss French Korean Magyar Turkish Czech Simplified Chinese Traditional Chinese Japanese Custom Key 1 Custom Key 2

  • This menu appears only in touch ‑ screen printer models.
  • Custom Key 2 appears only in some touch ‑ screen printer models.

Specify the unit of measurement for paper sizes.

Show 5 more labels / short text on this page
Use To · Keyboard · Keyboard Type · Paper Sizes · US Metric
Page 222 of the Lexmark MS818 user manual — Settings menu
Page 222 · click to enlarge
Page 222

Understanding the printer menus 222

Specify the display information in the upper corners of the home screen.

Left side Right side

Select from the following options:

None IP Address Hostname Contact Name Location Date/Time mDNS/DDNS Service Name Zero Configuration Name Custom Text [x] Model Name

  • This menu appears only in touch ‑ screen printer models.
  • IP Address is the factory default setting for Left side.
  • Date/Time is the factory default setting for Right side.

Customize the text to display in the upper corners of the home screen.

  • This menu appears only in touch ‑ screen printer models.
  • You can type up to 32 characters.

Specify the display information for Black Toner.

Select from the following options:

Do not display Display Message to Display

  • This menu appears only in touch ‑ screen printer models.
  • Do not display is the factory default setting for When to display.
  • Default is the factory default setting for Message to Display.
Show 10 more labels / short text on this page
Use To · Displayed Information · Displayed Information (continued) · Custom Text [x] · Displayed Information (continued) · Black Toner · When to display · Default Alternate Default · [text entry] Alternate · [text entry]
Page 223 of the Lexmark MS818 user manual — Settings menu
Page 223 · click to enlarge
Page 223

Understanding the printer menus 223

Specify the display information for Paper Jam, Load Paper, and Service Errors.

Paper Jam Load Paper Service Errors

Select from the following options:

Yes No Message to Display

  • This menu appears only in touch ‑ screen printer models.
  • No is the factory default setting for Display.
  • Default is the factory default setting for Message to Display.

Change the icons that appear on the control panel.

Change language Search Held Jobs Held Jobs USB Drive Profiles and Apps Bookmarks Jobs by user

Select from the following options:

Display Do not display

  • Profiles and Apps appears only in touch ‑ screen printer models.
  • Display is the factory default setting for Search Held Jobs, Held jobs, and USB Drive.
  • Do not display is the factory default setting for Change Language, Profiles and Apps, Bookmarks, and Jobs by user.

Change the icons that appear on the control panel.

Forms and Favorites Background and Idle Screen Eco-Settings

Select from the following options:

Display Do not display

  • These settings appear only in touch ‑ screen printer models.
  • Display is the factory default setting.

Format the printer date.

MM‑DD‑YYYY DD‑MM‑YYYY YYYY‑MM‑DD

  • This menu appears only in touch ‑ screen printer models.
  • MM-DD-YYYY is the U.S. factory default setting.
Show 9 more labels / short text on this page
Use To · Displayed Information (continued) · Display · Default Alternate Default · [text entry] Alternate · [text entry] · Home screen customization · Home screen customization · Date Format
Page 224 of the Lexmark MS818 user manual — Settings menu
Page 224 · click to enlarge
Page 224

Understanding the printer menus 224

Format the printer time.

12 hour A.M./P.M. 24 hour clock

  • This menu appears only in touch ‑ screen printer models.
  • 12 hour A.M./P.M. is the factory default setting.

20–100 Specify the brightness of the display.

  • This menu appears only in touch ‑ screen printer models.
  • 100 is the factory default setting.

Set the amount of light from the bin.

  • If Eco-Mode is set to Energy or Energy/Paper, then Dim is the factory default setting.
  • If Eco-Mode is set to Off or Paper, then Bright is the factory default setting.
  • This menu appears only when an indicator light is installed in the bin or an optional bin with an indicator light is added.

Set the button volume and feedback.

  • This menu appears only in touch ‑ screen printer models.
  • On is the factory default setting for Button Feedback.
  • 5 is the factory default setting for Volume.

Specify whether to display bookmarks from the Held Jobs area.

  • This menu appears only in touch ‑ screen printer models.
  • Yes is the factory default setting.

Web Page Refresh Rate

30–300 Specify the time between Embedded Web Server refreshes.

  • This menu appears only in touch ‑ screen printer models.
  • 120 seconds is the factory default setting.

Contact Name Specify a contact name for the printer.

  • This menu appears only in touch ‑ screen printer models.
  • The contact name is stored on the Embedded Web Server.
Show 11 more labels / short text on this page
Use To · Time Format · Screen Brightness · Output Lighting · Normal/Standby Mode · Off Dim Bright · Audio Feedback · Button Feedback · On Off Volume · Show Bookmarks · Yes No
Page 225 of the Lexmark MS818 user manual — Settings menu
Page 225 · click to enlarge
Page 225

Understanding the printer menus 225

Location Specify the printer location.

  • This menu appears only in touch ‑ screen printer models.
  • The location is stored on the Embedded Web Server.

Set an alarm when the printer requires user intervention. Select from the following options:

Alarm Control Cartridge Alarm Staple Alarm Hole Punch Alarm

  • Single is the factory default setting for Alarm Control.
  • Off is the factory default setting for Cartridge Alarm, Staple Alarm, and Hole Punch Alarm.

Set the idle time before the printer enters a lower power state.

  • Standby Mode appears only in touch ‑ screen printer models.
  • 15 minutes is the factory default setting.

Set the idle time before the printer begins operating in Sleep Mode.

  • 20 minutes is the factory default setting.
  • Disabled appears only when Energy Conserve is set to Off.

Print a job with the display turned off.

Print with Display Off

Allow printing with display off Display on when printing

Show 10 more labels / short text on this page
Use To · Alarms · Off Single Continuous · Timeouts · Standby Mode · Disabled 1–240 · Timeouts · Sleep Mode · Disabled 1–120 · Timeouts
Page 226 of the Lexmark MS818 user manual — Settings menu
Page 226 · click to enlarge
Page 226

Understanding the printer menus 226

Set the time before the printer enters Hibernate mode.

Disabled 20 minutes 1 hour 2 hours 3 hours 6 hours 1 day 2 days 3 days 1 week 2 weeks 1 month

Set the printer to Hibernate mode even if there is an active Ethernet or fax connection.

Hibernate Timeout on Connection

Hibernate Do Not Hibernate

Set the idle time before the display automatically returns to Ready state.

Remain in the same location and reset the Screen Timeout timer instead of returning to the home screen.

  • This menu appears only in touch ‑ screen printer models.
  • Off is the factory default setting.

Set the printer to end a print job after it has been idle for the specified amount of time.

  • 90 seconds is the factory default setting.
  • When the timer expires, any partially printed page still in the printer is printed.
  • Print Timeout is available only when using PCL emulation.

Set the time the printer waits to receive for more data before canceling a print job.

  • 40 seconds is the factory default setting.
  • Wait Timeout is available only when the printer is using PostScript emulation.
Show 15 more labels / short text on this page
Use To · Timeouts · Hibernate Timeout · Timeouts · Timeouts · Screen Timeout · Timeouts · Prolong Screen Timeout · Off On · Timeouts · Print Timeout · Disabled 1–255 · Timeouts · Wait Timeout · Disabled 15–65535
Page 227 of the Lexmark MS818 user manual — Settings menu
Page 227 · click to enlarge
Page 227

Understanding the printer menus 227

Set the time the printer waits for user intervention before it holds jobs that require unavailable resources.

  • 30 seconds is the factory default setting.
  • This menu appears only when a hard disk is installed.

Set the printer to restart when an error occurs.

Reboot when idle Reboot always Reboot never

Determine the number of automatic reboots the printer can perform.

Let the printer automatically continue printing from certain offline situations when these are not resolved within the specified time period.

Specify whether the printer reprints jammed pages.

Set the printer to check for jammed paper automatically.

Set the printer to print the correct output for a page.

Remain in the same location and reset the Screen Timeout timer instead of returning to the home screen.

  • This menu appears only in touch ‑ screen printer models.
  • Off is the factory default setting.
Show 22 more labels / short text on this page
Use To · Timeouts · Job Hold Timeout · Error Recovery · Auto Reboot · Error Recovery · Max Auto Reboots · Print Recovery · Auto Continue · Disabled 5–255 · Print Recovery · Jam Recovery · On Off Auto · Print Recovery · Jam Assist · On Off · Print Recovery · Page Protect · Off On · Accessibility Settings · Prolong Screen Timeout · On Off
Page 228 of the Lexmark MS818 user manual — Settings menu
Page 228 · click to enlarge
Page 228

Understanding the printer menus 228

Adjust the Voice Guidance speaking rate.

Very Slow Slow Normal Fast Faster Very Fast Rapid Very Rapid Fastest

Set the headphones volume.

Information Sent to Lexmark

Send anonymous device usage information to Lexmark.

Supplies and Page Usage (Anonymous)

Determine how the printer, while in idle state, reacts to a short press of the Sleep button.

Do Nothing Sleep Hibernate

Press and Hold Sleep Button

Determine how the printer, while in idle state, reacts to a long press of the Sleep button.

Do Nothing Sleep Hibernate

Restore the printer factory default settings.

Do Not Restore Restore Now

  • Do Not Restore is the factory default setting.
  • All downloads stored in the RAM are deleted. Downloads stored in the flash memory or in the printer hard disk are not affected.

Select a custom home message that appears as an alternating display of the printer status.

Off IP Address Hostname Contact Name Location Zero Configuration Name Custom Text 1

Export the configuration package to a flash drive.

Show 11 more labels / short text on this page
Use To · Accessibility Settings · Speech Rate · Accessibility Settings · Headphone Volume · On Off · Press Sleep Button · Factory Defaults · Custom Home Message · Export Configuration Package · Export
Page 229 of the Lexmark MS818 user manual — Print Settings menu
Page 229 · click to enlarge
Page 229

Understanding the printer menus 229

Export Compressed Logs File

Export the compressed logs file to a flash drive.

Flash Drive Menu

Print Settings menu

1–999 Specify a default number of copies for each print job.

Set a default paper source for all print jobs.

Tray [x] Multipurpose Feeder1

Manual Paper Manual Envelope

Stack the pages of a print job in sequence when printing multiple copies.

(1,1,1) (2,2,2) (1,2,3) (1,2,3)

Specify whether prints are on one side or on both sides of the page.

1 sided 2 sided

Specify whether prints are stapled.

  • Off is the factory default setting.
  • On allows the printer to staple print jobs.
  • This menu appears only when a supported staple finisher is installed.

Specify whether prints have holes for binding.

  • Off is the factory default setting.
  • This menu appears only when a supported staple, hole punch finisher is installed.

Specify the number of holes to be made on the prints.

2 holes 3 holes 4 holes

  • “3 holes” is the U.S. factory default setting. “4 holes” is the international factory default setting.
  • This menu appears only when a supported staple, hole punch finisher is installed.

1 This menu appears only in touch‑screen printer models.

2 This menu appears only in non‑touch‑screen printer models.

Show 13 more labels / short text on this page
Use To · Export · Use To · Copies · Paper Source · MP Feeder2 · Collate · Sides (Duplex) · Staple · Off On · Hole Punch · Off On · Hole Punch Mode
Page 230 of the Lexmark MS818 user manual — Flash Drive Menu
Page 230 · click to enlarge
Page 230

Understanding the printer menus 230

Define the way duplexed pages are bound and printed.

Long Edge Short Edge

  • Long Edge assumes binding along the long edge of the page (left edge for portrait and top edge for landscape). This is the factory default setting.
  • Short Edge assumes binding along the short edge of the page (top edge for portrait and left edge for landscape).

Specify the orientation of a multiple‑page document.

  • Auto is the factory default setting.
  • This setting affects jobs if the value of the Paper Saver setting in the same menu is not set to Off.

Specify that multiple‑page images be printed on one side of a paper.

Off 2‑Up 3‑Up 4‑Up 6‑Up 9‑Up 12‑Up 16‑Up

  • Off is the factory default setting.
  • The number selected is the number of page images that will print per side.

Print a border on each page image when using N‑Up (pages per side).

  • None is the factory default setting.
  • This setting affects jobs if the value of the Paper Saver setting in the same menu is not set to Off.

Specify the positioning of multiple‑page images when using N‑Up (pages per side).

Horizontal Reverse Horizontal Reverse Vertical Vertical

  • Horizontal is the factory default setting.
  • Positioning depends on the number of page images and whether they are in portrait or landscape orientation.
  • This setting affects jobs if the value of the Paper Saver setting in the same menu is not set to Off.

1 This menu appears only in touch‑screen printer models.

2 This menu appears only in non‑touch‑screen printer models.

Show 8 more labels / short text on this page
Use To · Duplex Binding · Paper Saver Orientation · Auto Landscape Portrait · Paper Saver · Paper Saver Border · None Solid · Paper Saver Ordering
Page 231 of the Lexmark MS818 user manual — Setup menu
Page 231 · click to enlarge
Page 231

Understanding the printer menus 231

Specify if blank separator sheets are inserted.

Off Between Copies Between Jobs Between Pages

  • Off is the factory default setting.
  • Between Copies inserts a blank sheet between each copy of a print job if Collate is set to “(1,2,3) (1,2,3).” If Collate is set to “(1,1,1) (2,2,2),” then a blank page is inserted between each set of printed pages, such as after all page 1's and after all page 2's.
  • Between Jobs inserts a blank sheet between print jobs.
  • Between Pages inserts a blank sheet between each page of the print job. This setting is useful when printing on transparencies or when inserting blank pages in a document for notes.

Specify the paper source for the separator sheet.

Tray [x] Manual Feeder Multipurpose Feeder1

Specify if blank pages are inserted in a print job.

Do Not Print Print

1 This menu appears only in touch‑screen printer models.

2 This menu appears only in non‑touch‑screen printer models.

Print Settings

Setup menu

Set the default printer language.

PCL Emulation PS Emulation

  • PCL Emulation is the factory default setting.
  • PostScript emulation uses a PostScript interpreter for processing print jobs.
  • PCL Emulation uses a PCL interpreter for processing print jobs.
  • Setting a printer language default does not prevent a software program from sending print jobs that use another printer language.
Show 7 more labels / short text on this page
Use To · Separator Sheets · Separator Sheet Source · MP Feeder2 · Blank Pages · Use To · Printer Language
Page 232 of the Lexmark MS818 user manual — Print Settings
Page 232 · click to enlarge
Page 232

Understanding the printer menus 232

Specify that print jobs be removed from the print queue when they require unavailable printer options or custom settings. They are stored in a separate print queue, so other jobs print normally. When the missing information or options, or both are obtained, the stored jobs print.

  • Off is the factory default setting.
  • This menu appears only when a formatted, working printer hard disk is installed. This requirement ensures that stored jobs are not deleted if the printer loses power.

Set the logical and physical printable area.

Normal Fit to Page Whole Page

  • Normal is the factory default setting. When attempting to print data in the non ‑ printable area defined by the Normal setting, the printer clips the image at the boundary.
  • Fit to Page fits the page content into the selected paper size.
  • Whole Page allows the image to be moved into the non ‑ printable area defined by the Normal setting, but the printer clips the image at the Normal setting boundary. This setting affects only pages printed using a PCL 5e interpreter and has no effect on pages printed using the PCL XL or PostScript interpreter.

Set the storage location for downloads.

  • RAM is the factory default setting. Storing downloads in the RAM is temporary.
  • Storing downloads in a flash memory or in a printer hard disk places them in permanent storage. Downloads remain in the flash memory or printer hard disk even when the printer is turned off.
  • This menu item appears only if an optional flash memory or a formatted, working printer hard disk is installed.
Show 6 more labels / short text on this page
Use To · Job Waiting · On Off · Print Area · Download Target · RAM Flash Disk
Page 233 of the Lexmark MS818 user manual — Finishing menu
Page 233 · click to enlarge
Page 233

Understanding the printer menus 233

Specify how the printer handles temporary downloads, such as fonts and macros stored in the RAM, when the printer receives a print job that requires more than the available memory.

  • Off is the factory default setting. This sets the printer to retain downloads only until memory is needed. Downloads are deleted in order to process print jobs.
  • On sets the printer to retain downloads during language changes and printer resets. If the printer runs out of memory, then Memory Full [38] appears on the printer display, but downloads are not deleted.

Specify the order in which held and confidential jobs are printed when Print All is selected.

Alphabetical Oldest First Newest First

Finishing menu

Specify whether two‑sided (duplex) printing is set as the default for all print jobs.

1 sided 2 sided

  • “1 sided” is the factory default setting.
  • You can set two ‑ sided printing from the printer software. For Windows users: Click File > Print , and then click Properties , Preferences , Options , or Setup . For Macintosh users:

Choose File > Print, and then adjust the settings from the Print dialog and pop‑up menus.

Define the way duplexed pages are bound and printed.

Long Edge Short Edge

  • Long Edge is the factory default setting. Long Edge assumes binding along the long edge of the page (left edge for portrait and top edge for landscape).
  • Short Edge assumes binding along the short edge of the page (top edge for portrait and left edge for landscape).

1–999 Specify the default number of copies for each print job.

1 This menu appears only in touch‑screen printer models.

2 This menu appears only in non‑touch‑screen printer models.

Show 8 more labels / short text on this page
Use To · Resource Save · On Off · Print All Order · Use To · Sides (Duplex) · Duplex Binding · Copies
Page 234 of the Lexmark MS818 user manual — Finishing menu
Page 234 · click to enlarge
Page 234

Understanding the printer menus 234

Specify whether blank pages are inserted in a print job.

Do Not Print Print

Stack the pages of a print job in sequence when printing multiple copies.

(1,1,1) (2,2,2) (1,2,3) (1,2,3)

Specify whether blank separator sheets are inserted.

Off Between Copies Between Jobs Between Pages

  • Off is the factory default setting.
  • Between Copies inserts a blank sheet between each copy of a print job if Collate is set to “(1,2,3) (1,2,3).” If Collate is set to “(1,1,1) (2,2,2),” then a blank page is inserted between each set of printed pages, such as after all page 1's and after all page 2's.
  • Between Jobs inserts a blank sheet between print jobs.
  • Between Pages inserts a blank sheet between each page of a print job. This setting is useful when printing transparencies or when inserting blank pages in a document.

Specify the paper source for the separator sheet.

  • Tray 1 (standard tray) is the factory default setting.
  • From the Paper menu, set Configure MP to "Cassette" for Multipurpose Feeder or MP Feeder to appear as a menu setting.

Print multiple‑page images on one side of a paper.

Off 2‑Up 3‑Up 4‑Up 6‑Up 9‑Up 12‑Up 16‑Up

  • Off is the factory default setting.
  • The number selected is the number of page images that will print per side.

Specify the positioning of multiple‑page images when using Paper Saver.

Horizontal Reverse Horizontal Reverse Vertical Vertical

  • Horizontal is the factory default setting.
  • Positioning depends on the number of page images and whether they are in portrait or landscape orientation.

1 This menu appears only in touch‑screen printer models.

2 This menu appears only in non‑touch‑screen printer models.

Show 10 more labels / short text on this page
Use To · Blank Pages · Collate · Separator Sheets · Separator Source · Tray [x] · Multipurpose Feeder1 · MP Feeder2 · Paper Saver · Paper Saver Ordering
Page 235 of the Lexmark MS818 user manual — Finishing menu
Page 235 · click to enlarge
Page 235

Understanding the printer menus 235

Specify the orientation of a multiple‑page document.

Print a border when using Paper Saver.

Specify whether printed output is stapled.

  • Off is the factory default setting.
  • This menu appears only when a supported staple finisher is installed.

Run Stapler Test Print a report that confirms that the staple finisher is functioning properly.

Specify whether holes will be created on printed outputs for the purpose of collecting the sheets in a binder or folder.

  • Off is the factory default setting.
  • This menu appears only when a supported staple, hole punch finisher is installed.

Specify the number of holes to be created on printed outputs for the purpose of collecting the sheets in a binder or folder.

2 holes 3 holes 4 holes

  • “3 holes” is the U.S. factory default setting. “4 holes” is the international factory default setting.
  • This menu appears only when a supported staple, hole punch finisher is installed.

Offset pages at certain instances.

None Between Copies Between Jobs

  • None is the factory default setting.
  • Between Copies inserts a blank sheet between each copy of a print job if Collate is set to “(1,2,3) (1,2,3).” If Collate is set to “(1,1,1) (2,2,2),” then a blank page is inserted between each set of printed pages, such as after all page 1's and after all page 2's.
  • Between Jobs sets the same offset position for the entire print job regardless of the number of copies printed.
  • This menu appears only when a supported staple finisher is installed.

1 This menu appears only in touch‑screen printer models.

2 This menu appears only in non‑touch‑screen printer models.

Show 11 more labels / short text on this page
Use To · Paper Saver Orientation · Auto Landscape Portrait · Paper Saver Border · None Solid · Staple Job · Off On · Hole Punch · On Off · Hole Punch Mode · Offset Pages
Page 236 of the Lexmark MS818 user manual — Job Accounting menu
Page 236 · click to enlarge
Page 236

Understanding the printer menus 236

Quality menu

Specify the printed output resolution in dots per inch.

300 dpi 600 dpi 1200 dpi 1200 Image Q 2400 Image Q

Enable more pixels to print in clusters for clarity, in order to enhance images horizontally or vertically, or to enhance fonts.

Off Fonts Horizontally Vertically Both directions

1–10 Lighten or darken the printed output.

  • 8 is the factory default setting.
  • Selecting a smaller number can help conserve toner.

Enable a print mode preferable for files such as architectural drawings, maps, electrical circuit diagrams, and flow charts.

  • Off is the factory default setting.
  • To set this option using the Embedded Web Server, type the network printer IP address in the Web browser address field.

Automatically adjust the contrast enhancement applied to images.

Adjust the printed output either by lightening or darkening it. You can conserve toner by lightening the output.

‑6 to 6

0–5 Adjust the contrast of printed objects.

Job Accounting menu

Set if the printer creates a log of the print jobs it receives.

Show 13 more labels / short text on this page
Use To · Print Resolution · Pixel Boost · Toner Darkness · Enhance Fine Lines · On Off · Gray Correction · Auto Off · Brightness · Contrast · Use To · Job Accounting Log · Off On
Page 237 of the Lexmark MS818 user manual — Quality menu
Page 237 · click to enlarge
Page 237

Understanding the printer menus 237

Job Accounting Utilities Print and delete log files or export them to a flash drive.

Set how often a log file is created.

Log Action at End of Frequency

Set how the printer responds when the frequency threshold expires.

None E‑mail Current Log E‑mail & Delete Current Log Post Current Log Post & Delete Current Log

Log Near Full Level

Specify the maximum size of the log file before the printer executes the Log Action at Near Full.

Log Action at Near Full

Set how the printer responds when the hard disk is nearly full.

None E‑mail Current Log E‑mail & Delete Current Log E‑mail & Delete Oldest Log Post Current Log Post & Delete Current Log Post & Delete Oldest Log Delete Current Log Delete Oldest Log Delete All Logs Delete All But Current

  • None is the factory default setting.
  • The value defined in Log Near Full Level determines when this action is triggered.

Log Action at Full

Set how the printer responds when disk usage reaches the maximum limit (100MB).

None E‑mail & Delete Current Log E‑mail & Delete Oldest Log Post & Delete Current Log Post & Delete Oldest Log Delete Current Log Delete Oldest Log Delete All Logs Delete All But Current

URL to Post Logs Set where the printer posts job accounting logs.

E‑mail to Send Logs Specify the e‑mail address to which the device sends job accounting logs.

Log File Prefix Specify the prefix you want for the log file name.

Show 4 more labels / short text on this page
Use To · Accounting Log Frequency · Daily Weekly Monthly · Off 1–99
Page 238 of the Lexmark MS818 user manual — XPS menu
Page 238 · click to enlarge
Page 238

Understanding the printer menus 238

Utilities menu

Delete confidential and held jobs from the printer hard disk.

Confidential Held Not Restored All

  • Selecting a setting affects only print jobs that are stored in the printer hard disk. Bookmarks, print jobs on flash drives, and other types of held jobs are not affected.
  • Not Restored removes all Print and Hold jobs that are not restored from the printer hard disk or printer memory.

Format the flash memory.

  • Yes deletes all data stored in the flash memory.
  • No cancels the format request.
  • Flash memory refers to the memory added by installing a flash memory card in the printer.
  • The flash memory option card must not be read/write ‑ or write ‑ protected.
  • This menu item appears only when a formatted, working flash memory card is installed.

Delete Downloads on Disk

Delete downloads from the printer hard disk, including all held jobs, buffered jobs, and parked jobs.

Delete Now Do Not Delete

  • Delete Now sets the printer to delete the downloads and allows the display to return to the originating screen after the deletion.
  • Do Not Delete sets the printer display to return to the main Utilities menu.

Activate Hex Trace Assist in isolating the source of a print job problem.

  • When activated, all data sent to the printer is printed in hexadecimal and character representation, and control codes are not executed.
  • To exit or deactivate Hex Trace, turn off the printer.

Provide an estimate of the percentage coverage of toner on a page. The estimate is printed on a separate page at the end of each print job.

XPS menu

Print a page containing information on errors, including XML markup errors.

Show 9 more labels / short text on this page
Use To · Remove Held Jobs · Format Flash · Yes No · Coverage Estimator · Off On · Use To · Print Error Pages · Off On
Page 239 of the Lexmark MS818 user manual — PCL Emul menu
Page 239 · click to enlarge
Page 239

Understanding the printer menus 239

PDF menu

Scale page content to fit the selected paper size.

Print annotations in a PDF.

Do Not Print Print

PostScript menu

Print a page containing the PostScript error.

Lock PS Startup Mode

Disable the SysStart file.

Establish the font search order.

  • Resident is the factory default setting.
  • This menu item is available only when a formatted flash memory option card or printer hard disk is installed and operating properly.
  • Make sure the flash memory option or printer hard disk is not read/write ‑ , write ‑ , or password ‑ protected.
  • Job Buffer Size must not be set to 100%.

PCL Emul menu

Specify the set of fonts used by the Font Name menu.

Resident Disk Download Flash All

  • “Resident” is the factory default setting. Resident shows the factory default set of fonts downloaded in the RAM.
  • “Flash” and “Disk” settings show all fonts resident in that option.
  • The flash option must be properly formatted and cannot be read/write ‑ , write ‑ , or password ‑ protected.
  • “Download” shows all the fonts downloaded in the RAM.
  • “All” shows all fonts available to any option.
Show 12 more labels / short text on this page
Use To · Scale to Fit · Yes No · Annotations · Use To · Print PS Error · On Off · On Off · Font Priority · Resident Flash/Disk · Use To · Font Source
Page 240 of the Lexmark MS818 user manual — 10U PC ‑ 8 12U PC ‑ 850
Page 240 · click to enlarge
Page 240

Understanding the printer menus 240

Identify a specific font and the option where it is stored.

Specify the symbol set for each font name.

10U PC ‑ 8 12U PC ‑ 850

  • 10U PC ‑ 8 is the US factory default setting. 12U PC ‑ 850 is the international factory default setting.
  • A symbol set is a set of alphabetic and numeric characters, punctuation, and special symbols. Symbol sets support the different languages or specific programs such as math symbols for scientific text. Only the supported symbol sets are shown.

Change the point size for scalable typographic fonts.

1.00–1008.00

  • 12 is the factory default setting.
  • Point size refers to the height of the characters in the font. One point equals approximately 0.014 inch.
  • Point sizes can be increased or decreased in 0.25 ‑ point increments.

Specify the font pitch for scalable monospaced fonts.

0.08–100

  • 10 is the factory default setting.
  • Pitch refers to the number of fixed ‑ space characters per inch (cpi).
  • Pitch can be increased or decreased in 0.01 ‑ cpi increments.
  • For nonscalable monospaced fonts, the pitch appears on the display but it cannot be changed.

Specify the orientation of text and graphics on the page.

  • Portrait is the factory default setting. Portrait prints text and graphics parallel to the short edge of the page.
  • Landscape prints text and graphics parallel to the long edge of the page.

Specify the number of lines that print on each page.

  • 60 is the US factory default setting. 64 is the international default setting.
  • The printer sets the amount of space between each line based on the Lines per Page, Paper Size, and Orientation settings. Select the Paper Size and Orientation you want before setting Lines per Page.
Show 13 more labels / short text on this page
Use To · Font Name · Courier 10 · Symbol Set · PCL Emulation Settings · Point Size · PCL Emulation Settings · Pitch · PCL Emulation Settings · Orientation · Portrait Landscape · PCL Emulation Settings · Lines per Page
Page 241 of the Lexmark MS818 user manual — PDF menu
Page 241 · click to enlarge
Page 241

Understanding the printer menus 241

Set the printer to print on A4‑size paper.

198 mm 203 mm

  • “198 mm” is the factory default setting.
  • The 203 ‑ mm setting sets the width of the page to allow printing of eighty 10 ‑ pitch characters.

Specify whether the printer automatically performs a carriage return (CR) after a line feed (LF) control command.

Auto CR after LF

Specify whether the printer automatically performs a line feed (LF) after a carriage return (CR) control command.

Auto LF after CR

Configure the printer to work with printer software or programs that use different source assignments for trays and feeders.

Off None 0–199 Assign Tray [x]

  • “Off” is the factory default setting.
  • “None” ignores the Select Paper Feed command. This option appears only when it is selected by the PCL 5 interpreter.
  • “0–199” allows a custom setting to be assigned.

Off None 0–199 Assign Manual Paper

Off None 0–199 Assign Manual Env

Display the factory default setting assigned to each tray or feeder.

MPF Default = 8 T1 Default = 1 T1 Default = 4 T1 Default = 5 T1 Default = 20 T1 Default = 21 Env Default = 6 MPaper Default = 2 MEnv Default = 3

Show 12 more labels / short text on this page
Use To · PCL Emulation Settings · A4 Width · PCL Emulation Settings · On Off · PCL Emulation Settings · On Off · Tray Renumber · Assign MP Feeder · Off None 0–199 · Tray Renumber · View Factory Defaults
Page 242 of the Lexmark MS818 user manual — PPDS menu
Page 242 · click to enlarge
Page 242

Understanding the printer menus 242

Restore all tray and feeder assignments to the factory default settings.

PPDS menu

Sets the orientation of the text and graphics on the page

  • Portrait is the factory default setting.
  • Settings are duplicated in the PCL Emulation menu.

1–255 Sets the number of lines that print on each page

  • 64 is the factory default setting.
  • The printer sets the amount of space between each line based on the Lines per Page, Paper Size, and Orientation settings. Select the desired Paper Size and Orientation before setting Lines per Page.

0.25–30.00 Sets the number of lines that print per inch

  • 6 is the factory default setting.
  • Lines per Inch can be increased or decreased in 0.25 ‑ inch increments

Sets the logical and physical printable area of the page

  • Print is the factory default setting. Print data maintains its position with respect to edge of the paper.
  • When Whole is selected, document margins are calculated from the top left corner of the physical edge of the page.
  • Printing does not occur outside the printable area.

Specifies a default character set for PPDS print jobs

  • 2 is the factory default setting. Character Set 2 is composed of printable characters and symbols used in non ‑ US English languages.
  • When Characters Set 1 is selected, values given to the printer are interpreted as printer commands.

Replaces a missing font with a similar font

Show 14 more labels / short text on this page
Use To · Tray Renumber · Restore Defaults · Yes No · Menu item Description · Orientation · Portrait Landscape · Lines per Page · Lines per Inch · Page Format · Print Whole · Character Set · Best Fit · On Off
Page 243 of the Lexmark MS818 user manual — PPDS menu
Page 243 · click to enlarge
Page 243

Understanding the printer menus 243

Configures the printer to work with printer software or programs that use different source assignments for trays, drawers, and feeders

  • Off is the factory default setting.
  • Tray 2 is displayed only when it is installed.

Auto CR after LF

Specifies whether the printer automatically performs a carriage return (CR) after a line feed (LF) control command

  • Off is the factory default setting.
  • Settings are duplicated in the PCL Emulation menu.

Auto LF after CR

Specifies whether the printer automatically performs a line feed (LF) after a carriage return (CR) control command

  • Off is the factory default setting.
  • Settings are duplicated in the PCL Emulation menu.
Show 5 more labels / short text on this page
Menu item Description · Tray 1 Renumber · Off Tray 2 · On Off · On Off
Page 244 of the Lexmark MS818 user manual — HTML menu
Page 244 · click to enlarge
Page 244

Understanding the printer menus 244

HTML menu

Joanna MT Letter Gothic Lubalin Graph Marigold MonaLisa Recut Monaco New CenturySbk New York Optima Oxford Palatino StempelGaramond Taffy Times TimesNewRoman Univers Zapf Chancery NewSansMTJA NewSansMTCS NewSansMTCT NewSansMTKO

Set the default font for HTML documents.

Albertus MT Antique Olive Apple Chancery Arial MT Avant Garde Bodoni Bookman Chicago Clarendon Cooper Black Copperplate Coronet Courier Eurostile Garamond Geneva Gill Sans Goudy Helvetica Hoefler Text Intl CG Times Intl Courier Intl Univers

1–255 pt Set the default font size for HTML documents.

  • 12 pt is the factory default setting.
  • Font size can be increased in 1 ‑ point increments.

1–400% Scale the default font for HTML documents.

  • 100% is the factory default setting.
  • Scaling can be increased in 1% increments.

Set the page orientation for HTML documents.

8–255 mm Set the page margin for HTML documents.

  • 19 mm is the factory default setting.
  • Margin size can be increased in 1 ‑ mm increments.
Show 8 more labels / short text on this page
Use To · Font Name · Use To · Font Size · Scale · Orientation · Portrait Landscape · Margin Size
Page 245 of the Lexmark MS818 user manual — Help menu
Page 245 · click to enlarge
Page 245

Understanding the printer menus 245

Specify whether to print backgrounds on HTML documents.

Do Not Print Print

Image menu

Select the optimal paper size, scaling, and orientation.

Invert bitonal monochrome images.

  • Off is the factory default setting.
  • This setting does not apply to GIF or JPEG images.

Scale the image to fit the selected paper size.

Anchor Top Left Best Fit Anchor Center Fit Height/Width Fit Height Fit Width

  • Best Fit is the factory default setting.
  • When Auto Fit is set to On, Scaling is automatically set to Best Fit.

Set the image orientation.

Portrait Landscape Reverse Portrait Reverse Landscape

Help menu

Print All Guides Prints all the guides

Print Quality Provides information about solving print quality issues

Printing Guide Provides information about loading paper and other specialty media

Media Guide Provides a list of the paper sizes supported in trays and feeders

Print Defects Guide Provides a template for determining the cause of repeating print quality defects, and lists settings that can be used to adjust print quality

Menu Map Provides a list of the control panel menus and settings

Information Guide Provides help in locating additional information

Connection Guide Provides information about connecting the printer locally (USB) or to a network

Show 10 more labels / short text on this page
Use To · Backgrounds · Use To · Auto Fit · On Off · Invert · On Off · Scaling · Orientation · Menu item Description
Page 246 of the Lexmark MS818 user manual — Image menu
Page 246 · click to enlarge
Page 246

Understanding the printer menus 246

Moving Guide Provides instructions for safely moving the printer

Supplies Guide Provides information about ordering supplies

Menu item Description

Page 247 of the Lexmark MS818 user manual — Using recycled paper
Page 247 · click to enlarge
Page 247

Saving money and the environment 247

Saving money and the environment

Lexmark is committed to environmental sustainability and is continually improving its printers to reduce their impact on the environment. We design with the environment in mind, engineer our packaging to reduce materials, and provide collection and recycling programs. For more information, see:

  • The Notices chapter
  • The Environmental Sustainability section of the Lexmark Web site at <a href="http://www.lexmark.com/environment" rel="nofollow noopener" target="_blank">www.lexmark.com/environment</a>
  • The Lexmark recycling program at <a href="http://www.lexmark.com/recycle" rel="nofollow noopener" target="_blank">www.lexmark.com/recycle</a>

By selecting certain printer settings or tasks, you may be able to reduce your printer's impact even further. This chapter outlines the settings and tasks that may yield a greater environmental benefit.

Adjusting the brightness of the printer display

To save energy, or if you have trouble reading the display, adjust its brightness settings.

Using the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > General Settings.

3 In the Screen Brightness field, enter the brightness percentage you want for the display.

4 Click Submit.

Saving paper and toner

Studies show that as much as 80% of the carbon footprint of a printer is related to paper usage. You can significantly reduce your carbon footprint by using recycled paper and the following printing suggestions, such as printing on both sides of the paper and printing multiple pages on one side of a single sheet of paper.

For information on how you can quickly save paper and energy using one printer setting, see the following:

  • “Using Eco ‑ Mode” on page 75 for non ‑ touch ‑ screen printer models
  • “Using Eco ‑ Mode” on page 123 and “Using Eco ‑ Mode” on page 171 for touch ‑ screen printer models

Using recycled paper

As an environmentally conscious company, Lexmark supports the use of recycled office paper produced specifically for use in laser printers. For more information on recycled papers that work well with your printer, see “Using recycled paper and other office papers” on page 181.

Page 248 of the Lexmark MS818 user manual — Returning Lexmark cartridges for reuse or recycling
Page 248 · click to enlarge
Page 248

Saving money and the environment 248

Conserving supplies

  • Print on both sides of the paper.
  • Note: Two-sided printing is the default setting in the print driver.
  • Print multiple pages on a single sheet of paper.
  • Use the preview feature to see how the document looks like before printing it.
  • Print one copy of the document to check its content and format for accuracy.

Recycling

Lexmark provides collection programs and environmentally progressive approaches to recycling. For more information, see:

  • The Notices chapter
  • The Environmental Sustainability section of the Lexmark Web site at <a href="http://www.lexmark.com/environment" rel="nofollow noopener" target="_blank">www.lexmark.com/environment</a>
  • The Lexmark recycling program at <a href="http://www.lexmark.com/recycle" rel="nofollow noopener" target="_blank">www.lexmark.com/recycle</a>

Recycling Lexmark products

To return Lexmark products for recycling:

1 Go to www.lexmark.com/recycle.

2 Select the product you want to recycle.

Recycling Lexmark packaging

Lexmark continually strives to minimize packaging. Less packaging helps to ensure that Lexmark printers are transported in the most efficient and environmentally sensitive manner and that there is less packaging to dispose of. These efficiencies result in fewer greenhouse emissions, energy savings, and natural resource savings.

Lexmark cartons are 100% recyclable where corrugated recycling facilities exist. Facilities may not exist in your area.

The foam used in Lexmark packaging is recyclable where foam recycling facilities exist. Facilities may not exist in your area.

When you return a cartridge to Lexmark, you can reuse the box that the cartridge came in. Lexmark will recycle the box.

Returning Lexmark cartridges for reuse or recycling

The Lexmark Cartridge Collection Program allows you to return used cartridges for free to Lexmark for reuse or recycling. One hundred percent of the empty cartridges returned to Lexmark are either reused or demanufactured for recycling. The boxes used to return the cartridges are also recycled.

Page 249 of the Lexmark MS818 user manual — Conserving supplies
Page 249 · click to enlarge
Page 249

Saving money and the environment 249

To return Lexmark cartridges for reuse or recycling, do the following:

1 Go to www.lexmark.com/recycle.

2 Select the product that you want to recycle.

Page 250 of the Lexmark MS818 user manual — Ordering toner cartridges
Page 250 · click to enlarge
Page 250

Maintaining the printer 250

Maintaining the printer

Ordering supplies

To order parts and supplies in the U.S., contact Lexmark at 1-800-539-6275 for information about Lexmark authorized supplies dealers in your area. In other countries or regions, go to www.lexmark.com or contact the place where you purchased the printer.

Using genuine Lexmark parts and supplies

Your Lexmark printer is designed to function best with genuine Lexmark supplies and parts. Use of third-party supplies or parts may affect the performance, reliability, or life of the printer and its imaging components. Use of third-party supplies or parts can affect warranty coverage. Damage caused by the use of third-party supplies or parts is not covered by the warranty. All life indicators are designed to function with Lexmark supplies and parts, and may deliver unpredictable results if third-party supplies or parts are used. Imaging component usage beyond the intended life may damage your Lexmark printer or its associated components.

Estimated number of remaining pages

The estimated number of remaining pages is based on the recent printing history of the printer. Its accuracy may vary significantly and is dependent on many factors, such as actual document content, print quality settings, and other printer settings.

The accuracy of the estimated number of remaining pages may decrease when the actual printing consumption is different from the historical printing consumption. Consider the variable level of accuracy before purchasing or replacing supplies based on the estimate. Until an adequate print history is obtained on the printer, the estimated cartridge yield is based on approximately 5% coverage per page.

Ordering toner cartridges

  • Estimated cartridge yield is based on the ISO/IEC 19752 standard.
  • Extremely low print coverage for extended periods of time may negatively affect actual yield.
Page 251 of the Lexmark MS818 user manual — MS817 and MS818 Return program cartridges
Page 251 · click to enlarge
Page 251

Maintaining the printer 251

MS810, MS811, and MS812 Return program cartridges

Lexmark MS818 — MS810, MS811, and MS812 Return program cartridges diagram (page 251)
Fig. 177 · MS810, MS811, and MS812 Return program cartridges

* This supply item is supported only in MS811 and MS812 printer models.

For more information on countries located in each region, go to www.lexmark.com/regions.

MS810, MS811, and MS812 Regular cartridges

Lexmark MS818 — MS810, MS811, and MS812 Regular cartridges diagram (page 251)
Fig. 178 · MS810, MS811, and MS812 Regular cartridges

1 This supply item is supported only in MS810 printer model.

2 This supply item is supported only in MS811 and MS812 printer models.

For more information on countries located in each region, go to www.lexmark.com/regions.

MS817 and MS818 Return program cartridges

Lexmark MS818 — MS817 and MS818 Return program cartridges diagram (page 251)
Fig. 179 · MS817 and MS818 Return program cartridges

* This supply item is supported only in MS818 printer model. For more information on countries located in each region, go to www.lexmark.com/regions.

Page 252 of the Lexmark MS818 user manual — Ordering a maintenance kit
Page 252 · click to enlarge
Page 252

Maintaining the printer 252

MS817 and MS818 Regular cartridges

High yield toner cartridge 53B0HA01

Extra high yield toner cartridge 53B0XA02

1 This supply item is supported only in MS817 printer model.

2 This supply item is supported only in MS818 printer model.

For more information on countries located in each region, go to www.lexmark.com/regions.

Ordering an imaging unit

Extremely low print coverage for extended periods of time may cause imaging unit parts to fail prior to exhaustion of toner.

For more information on replacing the imaging unit, see the instruction sheet that came with the supply.

Part name Lexmark Return Program Regular

Imaging unit 520Z 520ZA

Ordering staple cartridges

Ordering a roller kit

For more information on replacing the roller kit, see the instruction sheet that came with the part.

Lexmark roller kit and part number

Printer engine roller maintenance kit 40X7706

Ordering a maintenance kit

To identify the supported fuser type, view the label on the fuser. Do either of the following:

  • Remove the toner cartridge and the imaging unit. The two-digit fuser type code (such as 00 or 01) can be seen on the front of the fuser.
Show 5 more labels / short text on this page
Item Regular cartridge · Worldwide · Item Part number · Staple cartridges 25A0013 · Type Part number
Page 253 of the Lexmark MS818 user manual — Storing supplies
Page 253 · click to enlarge
Page 253

Maintaining the printer 253

  • Using certain types of paper may require more frequent replacement of the maintenance kit.
  • The separator roller, fuser, pick roller assembly, and transfer roller are all included in the maintenance kit and can be individually ordered and replaced if necessary.
  • For more information on replacing the maintenance kit, see the instruction sheet that came with the supply.

Lexmark Return Program fuser maintenance kits and part numbers

Fuser maintenance kit type Part number

Lexmark regular fuser maintenance kits and part numbers

Fuser maintenance kit type Part number

Storing supplies

Choose a cool, clean storage area for the printer supplies. Store supplies right side up in their original packing until you are ready to use them.

Do not expose supplies to:

  • Direct sunlight
  • Temperatures above 35°C (95°F)
  • High humidity above 80%
  • Salty air
  • Corrosive gases
  • Heavy dust
Show 10 more labels / short text on this page
Type 00 40X8420 · Type 01 40X8421 · Type 02 40X8422 · Type 03 40X8423 · Type 04 40X8424 · Type 05 40X8425 · Type 06 40X8426 · Type 07 40X8427 · Type 08 40X8428 · Type 09 40X8429
Page 254 of the Lexmark MS818 user manual — Replacing the toner cartridge
Page 254 · click to enlarge
Page 254

Maintaining the printer 254

Replacing supplies

Replacing the toner cartridge

1 Lift the front cover, and then pull down the multipurpose feeder door.

Lexmark MS818 — Replacing the toner cartridge diagram (page 254)
Fig. 180 · Replacing the toner cartridge

2 Pull the cartridge out of the printer using the handle.

Lexmark MS818 — Replacing the toner cartridge diagram (page 254)
Fig. 181 · Replacing the toner cartridge
Page 255 of the Lexmark MS818 user manual — Replacing supplies
Page 255 · click to enlarge
Page 255

Maintaining the printer 255

3 Unpack the new toner cartridge, then remove the packing material, and then shake the cartridge to redistribute the toner.

Lexmark MS818 — Replacing supplies diagram (page 255)
Fig. 182 · Replacing supplies

4 Insert the toner cartridge into the printer by aligning the side rails of the cartridge with the arrows on the side rails inside the printer.

Lexmark MS818 — Replacing supplies diagram (page 255)
Fig. 183 · Replacing supplies

5 Close the multipurpose feeder door and the front cover.

Page 256 of the Lexmark MS818 user manual — Replacing the imaging unit
Page 256 · click to enlarge
Page 256

Maintaining the printer 256

Replacing the imaging unit

1 Lift the front cover, and then pull down the multipurpose feeder door.

2 Pull out the toner cartridge from the printer using the handle.

3 Lift the green handle, and then pull out the imaging unit from the printer.

Lexmark MS818 — Replacing the imaging unit diagram (page 256)
Fig. 184 · Replacing the imaging unit
Lexmark MS818 — Replacing the imaging unit diagram (page 256)
Fig. 185 · Replacing the imaging unit
Page 257 of the Lexmark MS818 user manual — Replacing the imaging unit
Page 257 · click to enlarge
Page 257

Maintaining the printer 257

4 Unpack the new imaging unit, and then shake it.

Lexmark MS818 — Replacing the imaging unit diagram (page 257)
Fig. 186 · Replacing the imaging unit

5 Remove all packing material from the imaging unit.

Lexmark MS818 — Replacing the imaging unit diagram (page 257)
Fig. 187 · Replacing the imaging unit

6 Insert the imaging unit into the printer by aligning the arrows on the side rails of the imaging unit with the arrows on the side rails inside the printer.

Lexmark MS818 — Replacing the imaging unit diagram (page 257)
Fig. 188 · Replacing the imaging unit
Page 258 of the Lexmark MS818 user manual — Replacing the imaging unit
Page 258 · click to enlarge
Page 258

Maintaining the printer 258

7 Insert the toner cartridge into the printer by aligning the side rails of the cartridge with the arrows on the side rails inside the printer.

8 Close the multipurpose feeder door and the front cover.

Page 259 of the Lexmark MS818 user manual — Replacing a staple cartridge
Page 259 · click to enlarge
Page 259

Maintaining the printer 259

Replacing a staple cartridge

1 Open the stapler door.

Lexmark MS818 — Replacing a staple cartridge diagram (page 259)
Fig. 189 · Replacing a staple cartridge

2 Pull down the latch of the staple cartridge holder, and then pull the holder out of the finisher.

Lexmark MS818 — Replacing a staple cartridge diagram (page 259)
Fig. 190 · Replacing a staple cartridge
Lexmark MS818 — Replacing a staple cartridge diagram (page 259)
Fig. 191 · Replacing a staple cartridge

3 Squeeze both sides of the empty staple case with your fingers, and then remove the staple case from the cartridge.

Lexmark MS818 — Replacing a staple cartridge diagram (page 259)
Fig. 192 · Replacing a staple cartridge
Page 260 of the Lexmark MS818 user manual — Cleaning the printer
Page 260 · click to enlarge
Page 260

Maintaining the printer 260

4 Insert the front side of the new staple case into the staple cartridge, and then push the rear side into the cartridge.

Lexmark MS818 — Cleaning printer parts diagram (page 260)
Fig. 193 · Cleaning printer parts

5 Push the staple cartridge into the finisher until it clicks into place.

6 Close the stapler door.

Cleaning printer parts

Cleaning the printer

  • Perform this task after every few months.
  • Damage to the printer caused by improper handling is not covered by the printer warranty.

1 Turn off the printer, and then unplug the power cord from the electrical outlet.

2 Remove paper from the standard bin and multipurpose feeder.

3 Remove any dust, lint, and pieces of paper around the printer using a soft brush or vacuum.

4 Wipe the outside of the printer with a damp, soft, lint‑free cloth.

  • Do not use household cleaners or detergents, as they may damage the finish of the printer.
  • Make sure that all areas of the printer are dry after cleaning.

5 Connect the power cord to the electrical outlet, and then turn on the printer.

Page 261 of the Lexmark MS818 user manual — Emptying the hole punch box
Page 261 · click to enlarge
Page 261

Maintaining the printer 261

Emptying the hole punch box

1 Pull out the hole punch box.

Lexmark MS818 — Emptying the hole punch box diagram (page 261)
Fig. 194 · Emptying the hole punch box

2 Empty the container.

Lexmark MS818 — Emptying the hole punch box diagram (page 261)
Fig. 195 · Emptying the hole punch box

3 Insert the emptied hole punch box back into the finisher until it clicks into place.

Lexmark MS818 — Emptying the hole punch box diagram (page 261)
Fig. 196 · Emptying the hole punch box
Lexmark MS818 — Emptying the hole punch box diagram (page 261)
Fig. 197 · Emptying the hole punch box
Page 262 of the Lexmark MS818 user manual — Shipping the printer
Page 262 · click to enlarge
Page 262

Maintaining the printer 262

Moving the printer

Moving the printer to another location

  • CAUTION—POTENTIAL INJURY: When moving the printer, follow these guidelines to avoid personal injury or printer damage:
  • Make sure that all doors and trays are closed.
  • Turn off the printer, and then unplug the power cord from the electrical outlet.
  • Disconnect all cords and cables from the printer.
  • If the printer has a caster base, then carefully roll it to the new location. Use caution when passing over thresholds and breaks in flooring.
  • If the printer does not have a caster base but is configured with optional trays, then lift the printer off the trays. Do not try to lift the printer and the trays at the same time.
  • Always use the handholds on the printer to lift it.
  • Any cart used to move the printer must have a surface able to support the full footprint of the printer.
  • Any cart used to move the hardware options must have a surface able to support the dimensions of the options.
  • Keep the printer in an upright position.
  • Avoid severe jarring movements.
  • Make sure that your fingers are not under the printer when you set it down.
  • Make sure that there is adequate clearance around the printer.

Shipping the printer

When shipping the printer, use the original packaging or call the place of purchase for a relocation kit.

Page 263 of the Lexmark MS818 user manual — Load paper properly
Page 263 · click to enlarge
Page 263

Clearing jams

Carefully select paper and specialty media and load them properly to avoid paper jams. For more information, see “Avoiding jams” on page 263. If jams occur, then follow the steps outlined in this chapter.

Avoiding jams

Load paper properly

  • Make sure paper lies flat in the tray.
Lexmark MS818 — Load paper properly diagram (page 263)
Fig. 198 · Load paper properly
  • Do not remove a tray while the printer is printing.
  • Do not load a tray while the printer is printing. Load it before printing, or wait for a prompt to load it.
  • Do not load too much paper. Make sure the stack height is below the maximum paper fill indicator.

Clearing jams 263

Page 264 of the Lexmark MS818 user manual — Allow the paper to enter the optional mailbox bins properly
Page 264 · click to enlarge
Page 264
  • Do not slide the paper into the tray. Load paper as shown in the illustration.
Lexmark MS818 — Clearing jams diagram (page 264)
Fig. 199 · Clearing jams
  • Make sure the guides in the tray or the multipurpose feeder are properly positioned and are not pressing tightly against the paper or envelopes.
  • Push the tray firmly into the printer after loading paper.
  • If you are loading prepunched paper for use with the staple finisher, then make sure the holes on the long edge of the paper are on the right side of the tray. For more information, see the “Loading paper and specialty media” section of the User’s Guide .

Allow the paper to enter the optional mailbox bins properly

  • Make sure to adjust the bin extender so that the paper size indicators match the size of the paper used.
Lexmark MS818 — Allow the paper to enter the optional mailbox bins properly diagram (page 264)
Fig. 200 · Allow the paper to enter the optional mailbox bins p…

– If the bin extender is shorter than the size of the paper you are printing on, then the paper causes a

jam in the mailbox bin. For example, if you are printing on a legal-size paper and the bin extender is set to letter-size, then a jam occurs. – If the bin extender is longer than the size of the paper you are printing on, then the edges become

uneven and the paper is not stacked properly. For example, if you are printing on a letter-size paper and the bin extender is set to legal-size, then the paper does not stack properly.

Clearing jams 264

Page 265 of the Lexmark MS818 user manual — Identifying jam locations
Page 265 · click to enlarge
Page 265
  • If paper needs to be returned to the mailbox bin, then insert the paper under the bin arm, and then push the paper all the way back.
Lexmark MS818 — Identifying jam locations diagram (page 265)
Fig. 201 · Identifying jam locations

Use recommended paper

  • Use only recommended paper or specialty media.
  • Do not load wrinkled, creased, damp, bent, or curled paper.
  • Flex, fan, and straighten paper or specialty media before loading it.
Lexmark MS818 — Use recommended paper diagram (page 265)
Fig. 202 · Use recommended paper
  • Do not use paper that has been cut or trimmed by hand.
  • Do not mix paper sizes, weights, or types in the same tray.
  • Make sure the paper size and type are set correctly on the computer or printer control panel.
  • Store paper per manufacturer recommendations.

Identifying jam locations

  • When Jam Assist is set to On, the printer flushes blank or pages with partial prints after a jammed page has been cleared. Check your printed output for blank pages.
  • When Jam Recovery is set to On or Auto, the printer reprints jammed pages.

Clearing jams 265

Page 266 of the Lexmark MS818 user manual — Identifying jam locations
Page 266 · click to enlarge
Page 266
Lexmark MS818 — Identifying jam locations diagram (page 266)
Fig. 203 · Identifying jam locations
Lexmark MS818 — Identifying jam locations diagram (page 266)
Fig. 204 · Identifying jam locations
Lexmark MS818 — Identifying jam locations diagram (page 266)
Fig. 205 · Identifying jam locations

10 Staple finisher rear door

Show 11 more labels / short text on this page
Clearing jams 266 · Jam locations · 1 Staple finisher · 2 Standard bin · 3 Front door · 4 Multipurpose feeder · 5 Duplex unit · 6 Trays · 7 Output expander · 8 Rear door · 9 Mailbox
Page 267 of the Lexmark MS818 user manual — Paper jam in the front door
Page 267 · click to enlarge
Page 267

Paper jam in the front door

1 Open the front cover and the multipurpose feeder.

2 Remove the toner cartridge.

3 Remove the imaging unit.

Clearing jams 267

Page 268 of the Lexmark MS818 user manual — Paper jam in the rear door
Page 268 · click to enlarge
Page 268

4 Remove the jammed paper.

Lexmark MS818 — Paper jam in the rear door diagram (page 268)
Fig. 206 · Paper jam in the rear door

5 Insert the imaging unit.

6 Insert the toner cartridge.

7 Close the multipurpose feeder door and the front cover.

8 If necessary, press on the control panel.

Paper jam in the rear door

Clearing jams 268

Page 269 of the Lexmark MS818 user manual — Paper jam in the rear door
Page 269 · click to enlarge
Page 269

1 Open the rear door.

Lexmark MS818 — Paper jam in the rear door diagram (page 269)
Fig. 207 · Paper jam in the rear door

2 Remove the jammed paper.

3 Close the rear door.

Clearing jams 269

Page 270 of the Lexmark MS818 user manual — Paper jam in the rear door
Page 270 · click to enlarge
Page 270

4 Push the back of the standard tray.

Lexmark MS818 — Paper jam in the rear door diagram (page 270)
Fig. 208 · Paper jam in the rear door

5 Remove the jammed paper.

Lexmark MS818 — Paper jam in the rear door diagram (page 270)
Fig. 209 · Paper jam in the rear door
Lexmark MS818 — Paper jam in the rear door diagram (page 270)
Fig. 210 · Paper jam in the rear door

6 Insert the standard tray.

7 If necessary, press on the control panel.

Clearing jams 270

Page 271 of the Lexmark MS818 user manual — Paper jam in the duplex unit
Page 271 · click to enlarge
Page 271

Paper jam in the standard bin

1 Remove the jammed paper.

Lexmark MS818 — Paper jam in the standard bin diagram (page 271)
Fig. 211 · Paper jam in the standard bin

2 If necessary, press on the control panel.

Paper jam in the duplex unit

1 Remove the tray.

Lexmark MS818 — Paper jam in the duplex unit diagram (page 271)
Fig. 212 · Paper jam in the duplex unit
Lexmark MS818 — Paper jam in the duplex unit diagram (page 271)
Fig. 213 · Paper jam in the duplex unit

2 Remove the jammed paper.

Lexmark MS818 — Paper jam in the duplex unit diagram (page 271)
Fig. 214 · Paper jam in the duplex unit

Clearing jams 271

Page 272 of the Lexmark MS818 user manual — Paper jam in trays
Page 272 · click to enlarge
Page 272

3 Insert the tray.

4 If necessary, press on the control panel.

Paper jam in trays

1 Remove the tray.

Lexmark MS818 — Paper jam in trays diagram (page 272)
Fig. 215 · Paper jam in trays

2 Remove the jammed paper.

Clearing jams 272

Page 273 of the Lexmark MS818 user manual — Paper jam in the multipurpose feeder
Page 273 · click to enlarge
Page 273

3 Insert the tray.

4 If necessary, press on the control panel.

Paper jam in the multipurpose feeder

1 Remove paper from the multipurpose feeder.

2 Remove the jammed paper.

Lexmark MS818 — Paper jam in the multipurpose feeder diagram (page 273)
Fig. 216 · Paper jam in the multipurpose feeder

3 Flex, fan, and align the paper edges before loading.

Lexmark MS818 — Paper jam in the multipurpose feeder diagram (page 273)
Fig. 217 · Paper jam in the multipurpose feeder

Clearing jams 273

Page 274 of the Lexmark MS818 user manual — Paper jam in the staple finisher
Page 274 · click to enlarge
Page 274

4 Reload paper, and then adjust the paper guide.

Lexmark MS818 — Paper jam in the staple finisher diagram (page 274)
Fig. 218 · Paper jam in the staple finisher
Lexmark MS818 — Paper jam in the staple finisher diagram (page 274)
Fig. 219 · Paper jam in the staple finisher

5 If necessary, press on the control panel.

Paper jam in the staple finisher

1 Remove the jammed paper.

Lexmark MS818 — Paper jam in the staple finisher diagram (page 274)
Fig. 220 · Paper jam in the staple finisher

Clearing jams 274

Page 275 of the Lexmark MS818 user manual — Paper jam in the staple finisher
Page 275 · click to enlarge
Page 275

2 Open the rear staple finisher door.

Lexmark MS818 — Paper jam in the staple finisher diagram (page 275)
Fig. 221 · Paper jam in the staple finisher

3 Remove the jammed paper.

4 Close the door.

5 If necessary, press on the control panel.

Clearing jams 275

Page 276 of the Lexmark MS818 user manual — Staple jam in the finisher
Page 276 · click to enlarge
Page 276

Staple jam in the finisher

1 Open the staple access door.

2 Remove the staple cartridge holder.

3 Open the staple guard, and then remove the loose staples.

Lexmark MS818 — Staple jam in the finisher diagram (page 276)
Fig. 222 · Staple jam in the finisher

Clearing jams 276

Page 277 of the Lexmark MS818 user manual — Staple jam in the finisher
Page 277 · click to enlarge
Page 277

4 Close the staple guard.

Lexmark MS818 — Staple jam in the finisher diagram (page 277)
Fig. 223 · Staple jam in the finisher

5 Press the staples against the metal bracket.

Lexmark MS818 — Staple jam in the finisher diagram (page 277)
Fig. 224 · Staple jam in the finisher

Clearing jams 277

Page 278 of the Lexmark MS818 user manual — Staple jam in the finisher
Page 278 · click to enlarge
Page 278
Lexmark MS818 — Staple jam in the finisher diagram (page 278)
Fig. 225 · Staple jam in the finisher

6 Insert the staple cartridge holder.

7 Close the staple access door.

8 If necessary, press on the control panel.

Clearing jams 278

Page 279 of the Lexmark MS818 user manual — Paper jam in the output expander
Page 279 · click to enlarge
Page 279

Paper jam in the output expander

1 Open the rear output expander door.

Lexmark MS818 — Paper jam in the output expander diagram (page 279)
Fig. 226 · Paper jam in the output expander

2 Remove the jammed paper.

3 Close the door.

4 If necessary, press on the control panel.

Clearing jams 279

Page 280 of the Lexmark MS818 user manual — Paper jam in the mailbox
Page 280 · click to enlarge
Page 280

Paper jam in the mailbox

1 Open the rear mailbox door.

Lexmark MS818 — Paper jam in the mailbox diagram (page 280)
Fig. 227 · Paper jam in the mailbox

2 Remove the jammed paper.

3 Close the door.

4 If the jam is in the mailbox bin, then remove the jammed paper.

Clearing jams 280

Page 281 of the Lexmark MS818 user manual — Paper jam in the mailbox
Page 281 · click to enlarge
Page 281
Lexmark MS818 — Paper jam in the mailbox diagram (page 281)
Fig. 228 · Paper jam in the mailbox

5 If necessary, press on the control panel.

Clearing jams 281

Page 282 of the Lexmark MS818 user manual — Change [paper source] to [paper type] [paper size] load [orientation]
Page 282 · click to enlarge
Page 282

Troubleshooting

Understanding the printer messages

Cartridge, imaging unit mismatch [41.xy]

Use only a supported toner cartridge and imaging unit.

Change [paper source] to [custom string] load [orientation]

Try one or more of the following:

  • Load the correct paper size and type in the tray, verify the paper size and type settings are specified in the Paper menu on the printer control panel, and then select Finished changing paper . For

non‑touch‑screen printer models, press to confirm. • Touch Cancel job to cancel the print job.

Change [paper source] to [custom type name] load [orientation]

Try one or more of the following

  • Load the correct paper size and type in the tray, verify the paper size and type settings are specified in the Paper menu on the printer control panel, and then select Finished changing paper . For

non‑touch‑screen printer models, press to confirm. • Cancel the print job.

Change [paper source] to [paper size] load [orientation]

Try one or more of the following:

  • Load the correct paper size and type in the tray, verify the paper size and type settings are specified in the Paper menu on the printer control panel, and then select Finished changing paper . For

non‑touch‑screen printer models, press to confirm. • Cancel the print job.

Change [paper source] to [paper type] [paper size] load [orientation]

Try one or more of the following:

  • Load the correct paper size and type in the tray, verify the paper size and type settings are specified in the Paper menu on the printer control panel, and then select Finished changing paper . For

non‑touch‑screen printer models, press to confirm. • Cancel the print job.

Troubleshooting 282

Page 283 of the Lexmark MS818 user manual — Complex page, some data may not have printed [39]
Page 283 · click to enlarge
Page 283

Check tray [x] connection

Try one or more of the following:

  • Turn off the printer, and then turn it back on.

If the error occurs a second time, then:

1 Turn off the printer. 2 Unplug the power cord from the electrical outlet. 3 Remove the specified tray. 4 Reattach the tray. 5 Connect the power cord to a properly grounded electrical outlet. 6 Turn the printer back on.

If the error occurs again, then:

1 Turn off the printer. 2 Unplug the power cord from the electrical outlet. 3 Remove the tray. 4 Contact customer support. • To clear the message and resume the job, select Continue on the printer control panel. For non-touch-

screen printer models, press to confirm.

Close door or insert cartridge

The toner cartridge is missing or not installed properly. Insert the cartridge, and then close all doors and covers.

Close finisher rear door

Close the finisher rear door of the printer.

Close rear door

Close the rear door of the printer.

Complex page, some data may not have printed [39]

Try one or more of the following:

  • From the printer control panel, select Continue to ignore the message and continue printing. For

non‑touch‑screen printer models, press to confirm.

  • Cancel the current print job. For non ‑ touch ‑ screen printer models, press to confirm.
  • Install additional printer memory.

Troubleshooting 283

Page 284 of the Lexmark MS818 user manual — Disk must be formatted for use in this device
Page 284 · click to enlarge
Page 284

Configuration change, some held jobs were not restored [57]

Held jobs are invalidated because of any of the following possible changes in the printer:

  • The printer firmware has been updated.
  • The tray for the print job is removed.
  • The print job is sent from a flash drive that is no longer attached to the USB port.
  • The printer hard disk contains print jobs that were stored when the hard disk was installed in a different printer model.

From the printer control panel, select Continue to clear the message. For non-touch-screen printer models,

press to confirm.

Defective flash detected [51]

Try one or more of the following:

  • Replace the defective flash memory card.
  • From the printer control panel, select Continue to ignore the message and continue printing. For

non‑touch‑screen printer models, press to confirm. • Cancel the current print job.

Disk full [62]

Try one or more of the following:

  • Select Continue to clear the message and continue printing. For non-touch-screen printer models,
  • press to confirm.
  • Delete fonts, macros, and other data stored in the printer hard disk.
  • Install a printer hard disk with larger capacity.

Disk must be formatted for use in this device

From the printer control panel, select Format disk to format the printer hard disk and clear the message.

Disk near full. Securely clearing disk space.

Try one or more of the following:

  • Select Continue to clear the message. For non-touch-screen printer models, press to confirm.
  • Delete fonts, macros, and other data stored in the printer hard disk.
  • Install a hard disk with higher capacity.

Troubleshooting 284

Page 285 of the Lexmark MS818 user manual — Incompatible output bin [x] [59]
Page 285 · click to enlarge
Page 285

Empty the hole punch box

Try one or more of the following:

  • Empty the hole punch box.
  • Select Continue on the printer control panel to clear the message and continue printing.
  • Cancel the print job.

Error reading USB drive. Remove USB.

An unsupported USB device is inserted. Remove the USB device, and then insert a supported one.

Error reading USB hub. Remove hub.

An unsupported USB hub has been inserted. Remove the USB hub, and then install a supported one.

Imaging unit low [84.xy]

You may need to order an imaging unit. If necessary, select Continue on the printer control panel to clear

the message and continue printing. For non‑touch‑screen printer models, press to confirm.

Imaging unit nearly low [84.xy]

If necessary, select Continue on the printer control panel to clear the message and continue printing. For

non‑touch‑screen printer models, press to confirm.

Imaging unit very low, [x] estimated pages remain [84.xy]

You may need to replace the imaging unit very soon. For more information, see the "Replacing supplies" section of the User’s Guide.

If necessary, select Continue on the printer control panel to clear the message and continue printing. For

non‑touch‑screen printer models, press to confirm.

Incompatible output bin [x] [59]

Try one or more of the following:

  • Remove the indicated bin.
  • Select Continue on the printer control panel to clear the message and continue printing without using

the specified bin. For non-touch-screen printer models, press to confirm.

Troubleshooting 285

Page 286 of the Lexmark MS818 user manual — Insert Tray [x]
Page 286 · click to enlarge
Page 286

Incompatible tray [x] [59]

Try one or more of the following:

  • Remove the specified tray.
  • From the printer control panel, select Continue to clear the message and continue printing without

using the specified tray. For non-touch-screen printer models, press to confirm.

Incorrect paper size, open [paper source] [34]

Try one or more of the following:

  • Load the correct size of paper in the paper source.
  • From the printer control panel, select Continue to clear the message and print using a different paper
  • source. For non ‑ touch ‑ screen printer models, press to confirm.
  • Check the length and width guides of the paper source and make sure the paper is loaded properly.
  • Make sure the correct paper size and type are specified in the Printing Preferences or in the Print dialog.
  • Make sure the paper size and type are specified in the Paper menu on the printer control panel.
  • Make sure that the paper size is correctly set. For example, if Multipurpose Feeder Size or MP Feeder Size is set to Universal, then make sure the paper is large enough for the data being printed.
  • Cancel the print job.

Insert hole punch box

Insert the hole punch box into the finisher, and then select Continue on the printer control panel to clear

the message. For non-touch-screen printer models, press to confirm.

Insert staple cartridge

Try one or more of the following:

  • Insert a staple cartridge. For more information, see the instruction sheet that came with the supply.
  • Select Continue to clear the message and print without using the staple finisher. For non-touch-screen

printer models, press to confirm.

Insert Tray [x]

Try one or more of the following:

  • Insert the specified tray into the printer.
  • Cancel the print job.
  • Reset the active bin for a linked set of bins by selecting Reset active bin on the printer control panel.

Troubleshooting 286

Page 287 of the Lexmark MS818 user manual — Insufficient memory, some Held Jobs were deleted [37]
Page 287 · click to enlarge
Page 287

Install bin [x]

Try one or more of the following:

  • Install the specified bin: 1 Turn off the printer. 2 Unplug the power cord from the electrical outlet. 3 Install the specified bin. 4 Connect the power cord to a properly grounded electrical outlet. 5 Turn the printer back on.
  • Cancel the print job.
  • Reset active bin

Install Tray [x]

Try one or more of the following:

  • Install the specified tray: 1 Turn off the printer. 2 Unplug the power cord from the electrical outlet. 3 Install the specified tray. 4 Connect the power cord to a properly grounded electrical outlet. 5 Turn the printer back on.
  • Cancel the print job.
  • Reset the active bin.

Insufficient memory for Flash Memory Defragment operation [37]

Try one or more of the following:

  • From the printer control panel, select Continue to stop the defragmentation and continue printing. For
  • non ‑ touch ‑ screen printer models, press to confirm.
  • Delete fonts, macros, and other data from the printer memory.
  • Install additional printer memory.

Insufficient memory, some Held Jobs were deleted [37]

The printer deleted some held jobs in order to process current jobs.

Select Continue to clear the message. For non-touch-screen printer models, press to confirm.

Troubleshooting 287

Page 288 of the Lexmark MS818 user manual — Load [paper source] with [custom type name] [paper orientation]
Page 288 · click to enlarge
Page 288

Insufficient memory, some held jobs will not be restored [37]

Try one or more of the following:

  • From the printer control panel, select Continue to clear the message. For non-touch-screen printer

models, press to confirm. • Delete other held jobs to free up additional printer memory.

Insufficient memory to collate job [37]

Try one or more of the following:

  • From the printer control panel, select Continue to print the part of the job already stored and begin

collating the rest of the print job. For non‑touch‑screen printer models, press to confirm. • Cancel the current print job.

Insufficient memory to support Resource Save feature [35]

Install additional printer memory or select Continue on the printer control panel to disable Resource Save,

clear the message, and continue printing. For non‑touch‑screen printer models, press to confirm.

Load [paper source] with [custom string] [paper orientation]

Try one or more of the following:

  • Load the tray or feeder with the correct size and type of paper.
  • To use the tray that has the correct size or type of paper, select Finished loading paper on the printer

control panel. For non‑touch‑screen printer models, press to confirm.

Load [paper source] with [custom type name] [paper orientation]

Try one or more of the following:

  • Load the tray or feeder with the correct size and type of paper.
  • To use the tray that has the correct size or type of paper, select Finished loading paper on the printer

control panel. For non‑touch‑screen printer models, press to confirm.

Troubleshooting 288

Page 289 of the Lexmark MS818 user manual — Load multipurpose feeder with [custom type name] [orientation]
Page 289 · click to enlarge
Page 289

Load [paper source] with [paper size] [paper orientation]

Try one or more of the following:

  • Load the tray or feeder with the correct size of paper.
  • To use the tray or feeder that has the correct size of paper, select Finished loading paper on the printer

control panel. For non‑touch‑screen printer models, press to confirm.

Load [paper source] with [paper type] [paper size] [paper orientation]

Try one or more of the following:

  • Load the tray or feeder with the correct size and type of paper.
  • To use the tray or feeder that has the correct size and type of paper, select Finished loading paper on

the printer control panel. For non‑touch‑screen printer models, press to confirm.

Load multipurpose feeder with [custom string] [orientation]

Try one or more of the following:

  • Load the feeder with the correct paper size and type.
  • Depending on your printer model, touch Continue or press to clear the message and continue printing.

Load multipurpose feeder with [custom type name] [orientation]

Try one or more of the following:

  • Load the multipurpose feeder with the correct paper size and type.
  • Depending on your printer model, touch Continue or press to clear the message and continue printing.

Troubleshooting 289

Page 290 of the Lexmark MS818 user manual — Maintenance kit nearly low [80.xy]
Page 290 · click to enlarge
Page 290

Load multipurpose feeder with [paper size] [orientation]

Try one or more of the following:

  • Load the multipurpose feeder with the correct paper size.
  • Depending on your printer model, touch Continue or press to clear the message and continue printing.

Load multipurpose feeder with [paper type] [paper size] [orientation]

Try one or more of the following:

  • Load the multipurpose feeder with the correct paper size and type.
  • Depending on your printer model, touch Continue or press to clear the message and continue printing.

Load staples

Try one or more of the following:

  • Replace or insert the specified staple cartridge in the finisher.
  • Select Continue to clear the message and continue printing.
  • Cancel the print job.

Maintenance kit low [80.xy]

You may need to order a maintenance kit. For more information, visit the Lexmark support Web site at http://support.lexmark.com or contact customer support, and then report the message.

If necessary, select Continue to clear the message and continue printing. For non‑touch‑screen printer

models, press to confirm.

Maintenance kit nearly low [80.xy]

For more information, visit the Lexmark support Web site at http://support.lexmark.com or contact customer support, and then report the message.

If necessary, select Continue to clear the message and continue printing. For non‑touch‑screen printer

models, press to confirm.

Troubleshooting 290

Page 291 of the Lexmark MS818 user manual — Non ‑ Lexmark [supply type], see User’s Guide [33.xy]
Page 291 · click to enlarge
Page 291

Maintenance kit very low [80.xy]

You may need to replace the maintenance kit very soon. For more information, contact customer support at http://support.lexmark.com or your service representative.

If necessary, select Continue on the printer control panel to clear the message and continue printing. For

non‑touch‑screen printer models, press to confirm.

Memory full [38]

Try one or more of the following:

  • From the printer control panel, select Cancel job to clear the message. For non ‑ touch ‑ screen printer

models, press to confirm. • Install additional printer memory.

Misfeed cleared, extra sheets in output bin [24y.xx]

Select Continue on the control panel to clear the message and continue printing. For non‑touch‑screen

printer models, press to confirm.

Network [x] software error [54]

Try one or more of the following:

  • From the printer control panel, select Continue to continue printing. For non ‑ touch ‑ screen printer
  • models, press to confirm.
  • Turn off the printer, wait for about 10 seconds, and then turn the printer back on.
  • Update the network firmware in the printer or print server. For more information, visit the Lexmark support Web site at <a href="http://support.lexmark.com" rel="nofollow noopener" target="_blank">http://support.lexmark.com</a> .

Non ‑ Lexmark [supply type], see User’s Guide [33.xy]

The printer has detected a non‑Lexmark supply or part installed in the printer.

Your Lexmark printer is designed to function best with genuine Lexmark supplies and parts. Use of third- party supplies or parts may affect the performance, reliability, or life of the printer and its imaging components. For more information, see “Using genuine Lexmark parts and supplies” on page 250.

All life indicators are designed to function with Lexmark supplies and parts and may deliver unpredictable results if third-party supplies or parts are used. Imaging component usage beyond the intended life may damage your Lexmark printer or associated components.

To accept any and all of these risks and to proceed with the use of non-genuine supplies or parts in your

printer, press and hold and the # button on the control panel simultaneously for 15 seconds.

Troubleshooting 291

Page 292 of the Lexmark MS818 user manual — Parallel port [x] disabled [56]
Page 292 · click to enlarge
Page 292

For non‑touch‑screen printer models, press and on the control panel simultaneously for 15 seconds to clear the message and continue printing.

If you do not want to accept these risks, then remove the third-party supply or part from your printer and install a genuine Lexmark supply or part.

Not enough free space in flash memory for resources [52]

Try one or more of the following:

  • From the printer control panel, select Continue to clear the message and continue printing. For
  • non ‑ touch ‑ screen printer models, press to confirm.
  • Delete fonts, macros, and other data stored in the flash memory.
  • Upgrade to a larger capacity flash memory card.

Paper changes needed

Try one or more of the following:

  • Select Use current supplies on the printer control panel to clear the message and continue printing.

For non-touch-screen printer models, press to confirm. • Cancel the current print job.

Parallel port [x] disabled [56]

Try one or more of the following:

  • Select Continue to clear the message. For non-touch-screen printer models, press to confirm.

The printer discards any data received through the parallel port. • Select Reset active bin to reset the bin for a linked set of bins.

Printer had to restart. Last job may be incomplete.

Select Continue on the control panel to clear the message and continue printing. For non‑touch‑screen

printer models, press to confirm.

For more information, go to http://support.lexmark.com or contact customer support.

Troubleshooting 292

Page 293 of the Lexmark MS818 user manual — Reattach bins [x] – [y]
Page 293 · click to enlarge
Page 293

Reattach bin [x]

Try one or more of the following:

  • Turn off the printer, and then turn it back on.
  • Reattach the specified bin. 1 Turn off the printer. 2 Unplug the power cord from the electrical outlet. 3 Remove the specified bin. 4 Reattach the bin. 5 Connect the power cord to a properly grounded electrical outlet. 6 Turn the printer back on.
  • Remove the specified bin: 1 Turn off the printer. 2 Unplug the power cord from the electrical outlet. 3 Remove the specified bin. 4 Contact customer support.
  • Select Continue on the printer control panel to clear the message and print without using the specified

bin. For non-touch-screen printer models, press to confirm.

Reattach bins [x] – [y]

Try one or more of the following:

  • Turn off the printer, and then turn it back on.
  • Reattach the specified bins: 1 Turn off the printer. 2 Unplug the power cord from the electrical outlet. 3 Remove the specified bins. 4 Reattach the bins. 5 Connect the power cord to a properly grounded electrical outlet. 6 Turn the printer back on.
  • Remove the specified bins: 1 Turn off the printer. 2 Unplug the power cord from the electrical outlet. 3 Remove the specified bins. 4 Contact customer support.

Select Continue on the printer control panel to clear the message and print without using the specified

bins. For non-touch-screen printer models, press to confirm.

Troubleshooting 293

Page 294 of the Lexmark MS818 user manual — Remove paper from bin [x]
Page 294 · click to enlarge
Page 294

Reinstall missing or unresponsive cartridge [31.xy]

Try one or more of the following:

  • Check if the toner cartridge is missing. If missing, then install the toner cartridge.

For information on installing the toner cartridge, see the “Replacing supplies” section. • If the toner cartridge is installed, then remove and reinstall the unresponsive toner cartridge.

Reinstall missing or unresponsive imaging unit [31.xy]

Try one or more of the following:

  • Check if the imaging unit is missing. If missing, then install the imaging unit.

For information on installing the imaging unit, see the “Replacing supplies” section. • If the imaging unit is installed, then remove and reinstall the unresponsive imaging unit.

Remove defective disk [61]

Remove and replace the defective printer hard disk.

Remove packaging material, [area name]

1 Remove any remaining packaging material from the specified location.

2 Select Continue to clear the message and continue printing. For non‑touch‑screen printer models,

press to confirm.

Remove paper from all bins

Bins have reached their capacity. Remove paper from all bins to clear the message and continue printing.

If removing the paper does not clear the message, then select Continue on the printer control panel. For

non-touch-screen printer models, press to confirm.

Remove paper from bin [x]

Remove paper from the specified bin. The printer automatically detects paper removal and resumes printing.

If removing the paper does not clear the message, then select Continue on the printer control panel. For

non-touch-screen printer models, press to confirm.

Troubleshooting 294

Page 295 of the Lexmark MS818 user manual — Replace defective imaging unit [31.xy]
Page 295 · click to enlarge
Page 295

Remove paper from [linked set bin name]

Remove paper from the specified bin. The printer automatically detects paper removal and resumes printing.

If removing the paper does not clear the message, then select Continue on the printer control panel. For

non-touch-screen printer models, press to confirm.

Remove paper from standard output bin

Remove the paper stack from the standard bin. The printer automatically detects paper removal and resumes printing.

If removing the paper does not clear the message, then select Continue on the printer control panel. For

non-touch-screen printer models, press to confirm.

Replace cartridge, printer region mismatch [42.xy]

Install a toner cartridge that matches the region number of the printer. x indicates the value of the printer region. y indicates the value of the cartridge region. x and y can have the following values:

List of printer and toner cartridge regions

1 United States, Canada

2 European Economic Area (EEA), Switzerland

3 Asia Pacific, Australia, New Zealand

5 Africa, Middle East, rest of Europe

  • The x and y values are the .xy of the error code shown on the printer control panel.
  • The x and y values must match for printing to continue.

Replace defective imaging unit [31.xy]

Replace the defective imaging unit to clear the message. For more information, see the instruction sheet that came with the supply or see the “Replacing supplies” section of the User’s Guide.

Show 5 more labels / short text on this page
Troubleshooting 295 · Region number Region · 0 Global · 4 Latin America · 9 Invalid
Page 296 of the Lexmark MS818 user manual — Replace unsupported cartridge [32.xy]
Page 296 · click to enlarge
Page 296

Replace imaging unit, 0 estimated pages remain [84.xy]

Replace the imaging unit to clear the message and continue printing. For more information, see the instruction sheet that came with the supply or see the “Replacing supplies” section of the User’s Guide.

Replace maintenance kit, recommended life exceeded [80.xyz]

For more information, go to http://support.lexmark.com or contact customer support.

Depending on your printer model, touch Continue or press to clear the message and continue printing.

Replace maintenance kit to resume printing [80.xy]

For more information, go to http://support.lexmark.com or contact customer support, and then report the message.

If necessary, select Continue to clear the message and continue printing. For non‑touch‑screen printer

models, press to confirm.

Replace missing cartridge [31.xy]

Install the missing toner cartridge to clear the message. For more information, see the “Replacing supplies” section of the User’s Guide.

Replace missing fuser [31.xyz]

Install the missing fuser. For more information, see the instruction sheet that came with the replacement part.

Replace missing imaging unit [31.xy]

Install the missing imaging unit to clear the message. For more information, see the “Replacing supplies” section of the User’s Guide.

Replace roller kit [81.xx]

1 Replace the roller kit. For more information, see the instruction sheet that came with the part.

2 Press to clear the message and continue printing.

Replace unsupported cartridge [32.xy]

Remove the toner cartridge, and then install a supported one to clear the message and continue printing. For more information, see the instruction sheet that came with the supply.

Troubleshooting 296

Page 297 of the Lexmark MS818 user manual — Replace wiper
Page 297 · click to enlarge
Page 297

This error can also be caused by installing a genuine Lexmark cartridge, such as a high yield cartridge, that is not intended to be used in this product.

The following error codes indicate that a non‑genuine Lexmark toner cartridge is installed:

32.13 32.16 32.19 32.22 32.25 32.28 32.31 32.34 32.37

For more information, see “Using genuine Lexmark parts and supplies” on page 250.

Replace unsupported imaging unit [32.xy]

Remove the imaging unit, and then install a supported one to clear the message and continue printing. For more information, see the instruction sheet that came with the supply.

This error can also be caused by installing a genuine Lexmark imaging unit, such as a MICR unit, that is not intended to be used in this product.

The following error codes indicate that a non‑genuine Lexmark imaging unit is installed:

32.14 32.17 32.20 32.23 32.26 32.29 32.32 32.35 32.38

For more information, see “Using genuine Lexmark parts and supplies” on page 250.

Replace wiper

1 Replace the fuser wiper. For more information, see the instruction sheet that came with the part.

2 Select Continue on the control panel to clear the message and continue printing. For non‑touch‑screen

printer models, press to confirm.

Troubleshooting 297

Page 298 of the Lexmark MS818 user manual — Standard USB port disabled [56]
Page 298 · click to enlarge
Page 298

Restore held jobs?

Try one or more of the following:

  • Select Restore on the printer control panel to restore all held jobs stored in the printer hard disk. For

non‑touch‑screen printer models, press to confirm. • Select Do not restore if you do not want any print jobs to be restored. For non‑touch‑screen printer

models, press to confirm.

Serial port [x] disabled [56]

Try one or more of the following:

  • Select Continue to clear the message. For non-touch-screen printer models, press to confirm.
  • The printer discards any data received through the specified serial port.
  • Select Reset active bin to reset the active bin for a linked set of bins.
  • Make sure the Serial Buffer menu is set to Enabled.

Some held jobs were not restored

Select Continue to clear the message. For non‑touch‑screen printer models, press to confirm.

Standard network software error [54]

Try one or more of the following:

  • From the printer control panel, select Continue to continue printing. For non ‑ touch ‑ screen printer
  • models, press to confirm.
  • Turn off the printer and then turn it back on.
  • Update the network firmware in the printer or print server. For more information, visit the Lexmark support Web site at <a href="http://support.lexmark.com" rel="nofollow noopener" target="_blank">http://support.lexmark.com</a> .

Standard USB port disabled [56]

From the printer control panel, select Continue to clear the message. For non‑touch‑screen printer models,

press to confirm.

  • The printer discards any data received through the USB port.
  • Make sure the USB Buffer menu is not set to Disabled.

Troubleshooting 298

Page 299 of the Lexmark MS818 user manual — Too many trays attached [58]
Page 299 · click to enlarge
Page 299

Supply needed to complete job

A supply needed to complete the job is missing. Cancel the current job.

The device is operating in Safe Mode. Some print options may be disabled or provide unexpected results.

Select Continue to clear the message. For non‑touch‑screen printer models, press to confirm.

Too many bins attached [58]

1 Turn off the printer.

2 Unplug the power cord from the electrical outlet.

3 Remove the extra bins.

4 Connect the power cord to a properly grounded electrical outlet.

5 Turn the printer back on.

Too many disks installed [58]

1 Turn off the printer.

2 Unplug the power cord from the electrical outlet.

3 Remove the extra printer hard disks.

4 Connect the power cord to a properly grounded electrical outlet.

5 Turn the printer back on.

Too many flash options installed [58]

1 Turn off the printer.

2 Unplug the power cord from the electrical outlet.

3 Remove the extra flash memory.

4 Connect the power cord to a properly grounded electrical outlet.

5 Turn the printer back on.

Too many trays attached [58]

1 Turn off the printer.

2 Unplug the power cord from the electrical outlet.

3 Remove the extra trays.

Troubleshooting 299

Page 300 of the Lexmark MS818 user manual — USB port [x] disabled [56]
Page 300 · click to enlarge
Page 300

4 Connect the power cord to a properly grounded electrical outlet.

5 Turn the printer back on.

Tray [x] paper size unsupported

The paper size in the specified tray is unsupported. Replace it with a supported paper size.

Unformatted flash detected [53]

Try one or more of the following:

  • From the printer control, select Continue to stop the defragmentation and continue printing. For

non‑touch‑screen printer models, press to confirm. • Format the flash memory.

Unsupported disk

1 Remove the unsupported disk, and then install a supported one.

2 Select Continue to clear the message and continue printing. For non‑touch screen printer models,

press to confirm.

Unsupported option in slot [x] [55]

1 Turn off the printer.

2 Unplug the power cord from the wall outlet.

3 Remove the unsupported option card from the printer controller board, and then replace it with a supported card.

4 Connect the power cord to a properly grounded electrical outlet.

5 Turn the printer back on.

USB port [x] disabled [56]

Try one or more of the following:

  • Select Continue to clear the message. For non-touch-screen printer models, press to confirm.
  • The printer discards any data received through the specified serial port.
  • Select Reset active bin to reset the active bin for a linked set of bins.
  • Make sure the USB Buffer menu is enabled.

Troubleshooting 300

Page 301 of the Lexmark MS818 user manual — The printer is not responding
Page 301 · click to enlarge
Page 301

Solving printer problems

  • “Printer does not respond” on page 301
  • “Printing problems” on page 303
  • “Hardware and internal option problems” on page 312
  • “Paper feed problems” on page 316
  • “Print quality problems” on page 318

Printer does not respond

The printer is not responding

Go to step 2. Turn on the printer.

Make sure the printer is turned on.

Is the printer turned on?

Step 2 Check if the printer is in Sleep mode or Hibernate mode.

Press the Sleep button to wake the printer from Sleep mode or Hibernate mode.

Go to step 3.

Is the printer in Sleep mode or Hibernate mode?

Go to step 4. Plug one end of the power cord into the printer and the other to a properly grounded electrical outlet.

Check if one end of the power cord is plugged into the printer and the other to a properly grounded electrical outlet.

Is the power cord plugged into the printer and a properly grounded electrical outlet?

Unplug the other electrical equipment, and then turn on the printer. If the printer does not work, then reconnect the other electrical equipment.

Go to step 5.

Check other electrical equipment plugged into the electrical outlet.

Does other electrical equipment work?

Step 5 Check if the cables connecting the printer and the computer are inserted in the correct ports.

Go to step 6. Make sure to match the following:

  • The USB symbol on the cable with the USB symbol on the printer
  • The appropriate Ethernet cable with the Ethernet port

Are the cables inserted in the correct ports?

Show 5 more labels / short text on this page
Troubleshooting 301 · Action Yes No · Step 1 · Step 3 · Step 4
Page 302 of the Lexmark MS818 user manual — Solving printer problems
Page 302 · click to enlarge
Page 302

Turn on the switch or reset the breaker.

Go to step 7.

Make sure the electrical outlet is not turned off by a switch or breaker.

Is the electrical outlet turned off by a switch or breaker?

Connect the printer power cord directly to a properly grounded electrical outlet.

Go to step 8.

Check if the printer is plugged into any surge protectors, uninterruptible power supplies, or extension cords.

Is the printer plugged into any surge protectors, uninterruptible power supplies, or extension cords?

Go to step 9. Connect the printer cable securely to the printer and the computer, print server, option, or other network device.

Check if one end of the printer cable is plugged into a port on the printer and the other to the computer, print server, option, or other network device.

Is the printer cable securely attached to the printer and the computer, print server, option, or other network device?

Go to step 10. Turn off the printer, remove all packing materials, then reinstall the hardware options, and then turn on the printer.

Make sure to install all hardware options properly and remove any packing material.

Are all hardware options properly installed and all packing material removed?

Go to step 11. Use correct printer driver settings.

Check if you have selected the correct port settings in the printer driver.

Are the port settings correct?

Go to step 12. Install the correct printer driver.

Check the installed printer driver.

Is the correct printer driver installed?

The problem is solved.

Contact customer support.

Turn off the printer, then wait for about 10 seconds, and then turn the printer back on.

Is the printer working?

Show 9 more labels / short text on this page
Troubleshooting 302 · Action Yes No · Step 6 · Step 7 · Step 8 · Step 9 · Step 10 · Step 11 · Step 12
Page 303 of the Lexmark MS818 user manual — Confidential and other held documents do not print
Page 303 · click to enlarge
Page 303

Printer display is blank

The problem is solved.

Go to step 2.

Press the Sleep button on the printer control panel.

Does Ready appear on the printer display?

The problem is solved.

Turn off the printer, and then contact customer support.

Turn off the printer, then wait for about 10 seconds, and then turn the printer back on.

Do Please wait and Ready appear on the printer display?

Printing problems

Confidential and other held documents do not print

The problem is solved.

Go to step 2.

a From the control panel, check if the documents appear in the

Held Jobs list.

Are the documents printed?

The problem is solved.

Go to step 3.

The print job may contain a formatting error or invalid data.

  • Delete the print job, and then send it again.
  • For PDF files, generate a new file, and then print the documents.

Are the documents printed?

Show 7 more labels / short text on this page
Troubleshooting 303 · Action Yes No · Step 1 · Step 2 · Action Yes No · Step 1 · Step 2
Page 304 of the Lexmark MS818 user manual — Envelope seals when printing
Page 304 · click to enlarge
Page 304

The problem is solved.

Go to step 4.

If you are printing from the Internet, then the printer may be reading the multiple job titles as duplicates.

a Open the Printing Preferences dialog. b From the Print and Hold section, select Keep duplicate

documents. c Enter a PIN. d Resend the print job.

a Save and name each job differently. b Send the job individually.

Are the documents printed?

The problem is solved.

Go to step 5.

a Delete some held jobs to free up printer memory. b Resend the print job.

Are the documents printed?

The problem is solved.

Contact customer support.

a Add printer memory. b Resend the print job.

Are the documents printed?

Envelope seals when printing

a Use envelopes that have been stored in a dry environment.

Contact customer support.

The problem is solved.

Does the envelope seal when printing?

Show 8 more labels / short text on this page
Troubleshooting 304 · Action Yes No · Step 3 · For Windows users · For Macintosh users · Step 4 · Step 5 · Action Yes No
Page 305 of the Lexmark MS818 user manual — Error message about reading the flash drive appears
Page 305 · click to enlarge
Page 305

Error message about reading the flash drive appears

Go to step 2. Insert the flash drive into the front USB slot.

Check if the flash drive is inserted into the front USB slot.

Is the flash drive inserted into the front USB slot?

Step 2 Check if the indicator light on the printer control panel is blinking green.

Wait until the printer is ready, then view the held jobs list, and then print the documents.

Go to step 3.

Is the indicator light blinking green?

Go to step 4. The problem is solved.

a Check for an error message on the display. b Clear the message.

Does the error message still appear?

Go to step 5. The problem is solved.

Check if the flash drive is supported.

For more information on tested and approved USB flash drives, see “Supported flash drives and file types” on page 68 for non‑touch‑screen printer models. For touch‑screen printer models, see “Supported flash drives and file types” on page 116 and “Supported flash drives and file types” on page 164.

Does the error message still appear?

Contact customer support.

The problem is solved.

Check if the USB slot is disabled by the system support person.

Does the error message still appear?

Show 6 more labels / short text on this page
Troubleshooting 305 · Action Yes No · Step 1 · Step 3 · Step 4 · Step 5
Page 306 of the Lexmark MS818 user manual — Job prints from the wrong tray or on the wrong paper
Page 306 · click to enlarge
Page 306

Incorrect characters print

Deactivate Hex Trace mode.

Go to step 2.

Make sure the printer is not in Hex Trace mode.

Is the printer in Hex Trace mode?

Contact customer support.

The problem is solved.

a From the printer control panel, select Standard Network or

Network [x], and then set SmartSwitch to On. b Resend the print job.

Do incorrect characters print?

Job prints from the wrong tray or on the wrong paper

The problem is solved.

Go to step 2.

a Check if you are printing on paper that is supported by the tray. b Resend the print job.

Did the job print from the correct tray or on the correct paper?

The problem is solved.

Go to step 3.

a From the Paper menu on the printer control panel, set the paper

size and type to match the paper loaded in the tray. b Resend the print job.

Did the job print from the correct tray or on the correct paper?

The problem is solved.

Go to step 4.

a Depending on your operating system, open Printing

Preferences or the Print dialog, and then specify the paper type. b Resend the print job.

Did the job print from the correct tray or on the correct paper?

The problem is solved.

Contact customer support.

a Check if the trays are not linked. b Resend the print job.

Did the job print from the correct tray or on the correct paper?

Show 9 more labels / short text on this page
Troubleshooting 306 · Action Yes No · Step 1 · Step 2 · Action Yes No · Step 1 · Step 2 · Step 3 · Step 4
Page 307 of the Lexmark MS818 user manual — Large jobs do not collate
Page 307 · click to enlarge
Page 307

Large jobs do not collate

The problem is solved.

Go to step 2.

a From the Finishing menu on the printer control panel, set

Collate to (1,2,3) (1,2,3). b Resend the print job.

Did the job print and collate correctly?

The problem is solved.

Go to step 3.

a From the printer software, set Collate to (1,2,3) (1,2,3).

Did the job print and collate correctly?

The problem is solved.

Contact customer support.

Reduce the complexity of the print job by eliminating the number and size of fonts, the number and complexity of images, and the number of pages in the job.

Did the job print and collate correctly?

Multiple‑language PDF files do not print

The problem is solved.

Go to step 2.

a Check if the print options for the PDF output are set to embed

all fonts. b Generate a new PDF file, and then resend the print job.

Do the files print?

The problem is solved.

Contact customer support.

a Open the document you want to print in Adobe Acrobat. b Click File > Print > Advanced > Print As Image > OK > OK.

Do the files print?

Show 8 more labels / short text on this page
Troubleshooting 307 · Action Yes No · Step 1 · Step 2 · Step 3 · Action Yes No · Step 1 · Step 2
Page 308 of the Lexmark MS818 user manual — Print job takes longer than expected
Page 308 · click to enlarge
Page 308

Print job takes longer than expected

The problem is solved.

Go to step 2.

Change the environmental settings of the printer.

a From the printer control panel, navigate to:

Settings > General Settings b Select Eco‑Mode or Quiet Mode, and then select Off.

Did the job print?

The problem is solved.

Go to step 3.

Reduce the number and size of fonts, the number and complexity of images, and the number of pages in the print job, and then resend the job

Did the job print?

The problem is solved.

Go to step 4.

a Remove held jobs stored in the printer memory. b Resend the print job.

Did the job print?

The problem is solved.

Go to step 5.

a Disable the Page Protect feature.

From the printer control panel, navigate to:

Settings > General Settings > Print Recovery > Page Protect > Off b Resend the print job.

Did the job print?

The problem is solved.

Contact customer support.

Install additional printer memory, and then resend the print job.

Did the job print?

Show 7 more labels / short text on this page
Troubleshooting 308 · Action Yes No · Step 1 · Step 2 · Step 3 · Step 4 · Step 5
Page 309 of the Lexmark MS818 user manual — Print jobs do not print
Page 309 · click to enlarge
Page 309

Print jobs do not print

The problem is solved.

Go to step 2.

a From the document you are trying to print, open the Print dialog

and check if you have selected the correct printer.

Do the jobs print?

The problem is solved.

Go to step 3.

a Check if the printer is plugged in and turned on, and if Ready

appears on the printer display. b Resend the print job.

Do the jobs print?

The problem is solved.

Go to step 4.

If an error message appears on the printer display, then clear the message.

Do the jobs print?

The problem is solved.

Go to step 5.

a Check if the ports (USB, serial, or Ethernet) are working and if

the cables are securely connected to the computer and the printer.

Do the jobs print?

The problem is solved.

Go to step 6.

a Turn off the printer, wait for about 10 seconds, and then turn the

printer back on. b Resend the print job.

Do the jobs print?

The problem is solved.

Contact customer support.

a Remove, and then reinstall the printer software. For more

information, see “Installing the printer software” on page 35.

Do the jobs print?

Show 8 more labels / short text on this page
Troubleshooting 309 · Action Yes No · Step 1 · Step 2 · Step 3 · Step 4 · Step 5 · Step 6
Page 310 of the Lexmark MS818 user manual — Tray linking does not work
Page 310 · click to enlarge
Page 310

Printing slows down

  • When printing using narrow paper, the printer prints at a reduced speed to prevent damage to the fuser.
  • The printer speed may be reduced when printing for long periods of time, or printing at elevated temperatures.

The problem is solved.

Go to step 2.

a Make sure the size of the paper loaded in the tray matches the

fuser type.

Does the print speed increase?

The problem is solved.

Contact customer support.

a Replace the fuser. For more information on installing the fuser,

see the instruction sheet that came with the part. b Resend the print job.

Does the print speed increase?

Tray linking does not work

  • The trays can detect paper length.
  • The multipurpose feeder does not automatically detect the paper size. You must set the size from the Paper Size/Type menu.

The problem is solved.

Go to step 2.

a Open the trays, and then check if they contain paper of the

same size and type.

  • Check if the paper guides are in the correct positions for the size of the paper loaded in each tray.
  • Check if the paper size indicators on the paper guides are aligned with the paper size indicators on the tray. b Resend the print job.

Do the trays link correctly?

Show 6 more labels / short text on this page
Troubleshooting 310 · Action Yes No · Step 1 · Step 2 · Action Yes No · Step 1
Page 311 of the Lexmark MS818 user manual — Unexpected page breaks occur
Page 311 · click to enlarge
Page 311

The problem is solved.

Contact customer support.

a From the printer control panel, set the paper size and type in

the Paper menu to match the paper loaded in the trays to be linked.

Do the trays link correctly?

Unexpected page breaks occur

Step 1 Adjust the print timeout settings.

The problem is solved.

Go to step 2.

a From the printer control panel, navigate to:

Settings > General Settings > Timeouts > Print Timeout b Select a higher setting and then, depending on your printer

model, select or Submit. c Resend the print job.

Did the file print correctly?

The problem is solved.

Contact customer support.

a Check the original file for manual page breaks. b Resend the print job.

Did the file print correctly?

Show 5 more labels / short text on this page
Troubleshooting 311 · Action Yes No · Step 2 · Action Yes No · Step 2
Page 312 of the Lexmark MS818 user manual — 2100-sheet tray problems
Page 312 · click to enlarge
Page 312

Hardware and internal option problems

2100-sheet tray problems

The problem is solved.

Go to step 2.

a Pull out the tray, and then do one or more of the following:

  • Make sure paper lies flat in the tray.
  • Check for paper jams or misfeeds.
  • Check if the paper size indicators on the paper guides are aligned with the paper size indicators on the tray.
  • Check if the paper guides are aligned against the edges of the paper.
  • Make sure the paper is below the maximum paper fill indicator.
  • Check if you are printing on a recommended paper size and type.
  • Check if the paper or specialty media meets specifications and is not damaged. b Insert the tray properly.

Does the tray operate properly?

The problem is solved.

Go to step 3.

Turn off the printer, then wait about 10 seconds, and then turn it back on.

Does the tray operate properly?

Go to step 4. For more information, see the setup sheet that came with the 2100- sheet tray.

Print a menu settings page, and then check if the tray is listed in the Installed Features list.

Is the tray listed in the menu settings page?

Go to step 5. Manually add the tray in the printer driver.

Check if the tray is available in the printer driver.

Is the tray available in the printer driver?

Show 6 more labels / short text on this page
Troubleshooting 312 · Action Yes No · Step 1 · Step 2 · Step 3 · Step 4
Page 313 of the Lexmark MS818 user manual — Cannot detect internal option
Page 313 · click to enlarge
Page 313

The problem is solved.

Contact customer support.

Check if the tray is selected.

From the application you are using, select the tray. If you are using Mac OS X version 9, then make sure the printer is set up in Chooser.

Does the tray operate properly?

Cannot detect internal option

The problem is solved.

Go to step 2.

Turn off the printer, then wait for about 10 seconds, and then turn on the printer.

Does the internal option operate correctly?

Go to step 3. Connect the internal option to the controller board.

Check if the internal option is properly installed in the controller board.

a Turn off the printer using the power switch, and then unplug the

power cord from the electrical outlet. b Make sure the internal option is installed in the appropriate

connector in the controller board. c Connect the power cord to the printer, then to a properly

grounded electrical outlet, and then turn on the printer.

Is the internal option properly installed in the controller board?

Go to step 4. Reinstall the internal option.

Print a menu settings page, and then check to see if the internal option is listed in the Installed Features list.

Is the internal option listed in the menu settings page?

The problem is solved.

Contact customer support.

a Check if the internal option is selected.

It may be necessary to manually add the internal option in the printer driver to make it available for print jobs. For more information, see “Adding available options in the print driver” on page 35. b Resend the print job.

Does the internal option operate correctly?

Show 8 more labels / short text on this page
Troubleshooting 313 · Action Yes No · Step 5 · Action Yes No · Step 1 · Step 2 · Step 3 · Step 4
Page 314 of the Lexmark MS818 user manual — Internal Solutions Port does not operate correctly
Page 314 · click to enlarge
Page 314

Internal print server does not operate correctly

Go to step 2. Check if the internal print server is supported by the printer.

Reinstall the internal print server.

a Remove, and then install the internal print server. For more

information, see “Installing an Internal Solutions Port” on page 17. b Print a menu settings page, and then check if the internal print

server is listed in the Installed Features list.

Is the internal print server listed in the Installed Features list?

Step 2 Check the cable and the internal print server connection.

The problem is solved.

Contact customer support.

Use the correct cable, and then check if it is securely connected to the internal print server.

Does the internal print server operate correctly?

Internal Solutions Port does not operate correctly

Go to step 2. Check if you have a supported ISP.

Make sure the Internal Solutions Port (ISP) is installed.

a Install the ISP. For more information, see “Installing an Internal

Solutions Port” on page 17. b Print a menu settings page, and then check if the ISP is listed

in the Installed Features list.

Is the ISP listed in the Installed Features list?

The problem is solved.

Contact customer support.

Check the cable and the ISP connection.

a Use the correct cable, and then make sure it is securely

connected to the ISP. b Check if the ISP solution interface cable is securely connected

into the receptacle of the controller board.

Does the Internal Solutions Port operate correctly?

Show 6 more labels / short text on this page
Troubleshooting 314 · Action Yes No · Step 1 · Action Yes No · Step 1 · Step 2
Page 315 of the Lexmark MS818 user manual — Tray problems
Page 315 · click to enlarge
Page 315

Tray problems

The problem is solved.

Go to step 2.

a Pull out the tray, and then do one or more of the following:

  • Check for paper jams or misfeeds.
  • Check if the paper size indicators on the paper guides are aligned with the paper size indicators on the tray.
  • If you are printing on custom ‑ size paper, then make sure that the paper guides rest against the edges of the paper.
  • Make sure the paper is below the maximum paper fill indicator.
  • Make sure paper lies flat in the tray. b Check if the tray closes properly.

Is the tray working?

The problem is solved.

Go to step 3.

a Turn off the printer, then wait about 10 seconds, and then turn

the printer back on. b Resend the print job.

Is the tray working?

Go to step 4. Reinstall the tray. For more information, see the setup documentation that came with the tray.

Check if the tray is installed and recognized by the printer.

Print a menu settings page, and then check if the tray is listed in the Installed Features list.

Is the tray listed in the menu settings page?

The problem is solved.

Contact customer support.

Check if the tray is available in the printer driver.

Is the tray available in the printer driver?

Show 6 more labels / short text on this page
Troubleshooting 315 · Action Yes No · Step 1 · Step 2 · Step 3 · Step 4
Page 316 of the Lexmark MS818 user manual — Jammed pages are not reprinted
Page 316 · click to enlarge
Page 316

USB/parallel interface card does not operate correctly

Go to step 2. Check if you have a supported USB or parallel interface card.

Make sure the USB or parallel interface card is installed.

a Install the USB or parallel interface card. For more information,

see “Installing an Internal Solutions Port” on page 17. b Print a menu settings page, and then check if the USB or parallel

interface card is listed in the Installed Features list.

Is the USB or parallel interface card listed in the Installed Features list?

Step 2 Check the cable and the USB or parallel interface card connection.

The problem is solved.

Contact customer support.

Use the correct cable, and then make sure it is securely connected to the USB or parallel interface card.

Does the USB or parallel interface card operate correctly?

Paper feed problems

Jammed pages are not reprinted

a Turn on jam recovery.

The problem is solved.

Contact customer support.

1 From the printer control panel, navigate to:

Settings > General Settings > Print Recovery > Jam Recovery 2 Select On or Auto.

3 Depending on your printer model, press or touch Submit. b Resend the pages that did not print.

Were the jammed pages reprinted?

Show 4 more labels / short text on this page
Troubleshooting 316 · Action Yes No · Step 1 · Action Yes No
Page 317 of the Lexmark MS818 user manual — Paper jam message remains after jam is cleared
Page 317 · click to enlarge
Page 317

Paper frequently jams

Go to step 2. The problem is solved.

a Pull out the tray, and then do one or more of the following:

  • Make sure paper lies flat in the tray.
  • Check if the paper size indicators on the paper guides are aligned with the paper size indicators on the tray.
  • Check if the paper guides are aligned against the edges of the paper.
  • Make sure the paper is below the maximum paper fill indicator.
  • Check if you are printing on a recommended paper size and type. b Insert the tray properly.

If jam recovery is enabled, then the print jobs will reprint automatically.

Do paper jams still occur frequently?

Go to step 3. The problem is solved.

a Load paper from a fresh package.

Do paper jams still occur frequently?

Contact customer support.

The problem is solved.

a Review the tips on avoiding jams. For more information, see

“Avoiding jams” on page 263. b Follow the recommendations, and then resend the print job.

Do paper jams still occur frequently?

Paper jam message remains after jam is cleared

a Do either of the following:

Contact customer support.

The problem is solved.

  • For touch ‑ screen printer models, touch

or Done.

  • For non ‑ touch ‑ screen printer models, select Next > >

Clear the jam, press OK > . b Follow the instructions on the printer display.

Does the paper jam message remain?

Show 6 more labels / short text on this page
Troubleshooting 317 · Action Yes No · Step 1 · Step 2 · Step 3 · Action Yes No
Page 318 of the Lexmark MS818 user manual — Clipped pages or images
Page 318 · click to enlarge
Page 318

Print quality problems

Characters have jagged or uneven edges

Lexmark MS818 — Characters have jagged or uneven edges diagram (page 318)
Fig. 229 · Characters have jagged or uneven edges

Go to step 2. Select a font that is supported by the printer.

a Print a font sample list to check if the fonts you are using are

Menus > Reports > Print Fonts 2 Select PCL Fonts or PostScript Fonts. b Resend the print job.

Are you using fonts that are supported by the printer?

Check if the fonts installed on the computer are supported by the printer.

Are the fonts installed on the computer supported by the printer?

Clipped pages or images

Lexmark MS818 — Clipped pages or images diagram (page 318)
Fig. 230 · Clipped pages or images

a Move the width and length guides in the tray to the correct

positions for the paper loaded. b Resend the print job.

Troubleshooting 318

Page 319 of the Lexmark MS818 user manual — Compressed images appear on prints
Page 319 · click to enlarge
Page 319

Go to step 3. Do one or more of the following:

From the printer control panel, set the paper size and type in the Paper menu to match the paper loaded in the tray.

  • Specify the paper size from the tray settings to match the paper loaded in the tray.
  • Change the paper loaded in the tray to match the paper size specified in the tray settings.

Do the paper size and type match the paper loaded in the tray?

Go to step 4. The problem is solved.

a Depending on your operating system, specify the paper size

from Printing Preferences or from the Print dialog. b Resend the print job.

Is the page or image clipped?

Contact customer support.

The problem is solved.

a Reinstall the imaging unit.

1 Remove the toner cartridge. 2 Remove the imaging unit.

Is the page or image clipped?

Compressed images appear on prints

The problem is solved.

Go to step 2.

a Make sure the size of the paper loaded in the tray matches the

fuser type.

Do compressed images still appear?

Show 7 more labels / short text on this page
Troubleshooting 319 · Action Yes No · Step 2 · Step 3 · Step 4 · Action Yes No · Step 1
Page 320 of the Lexmark MS818 user manual — Gray background on prints
Page 320 · click to enlarge
Page 320
Lexmark MS818 — Gray background on prints diagram (page 320)
Fig. 231 · Gray background on prints

a Replace the fuser. For more information on installing the fuser,

see the instruction sheet that came with the part. b Resend the print job.

Gray background on prints

Lexmark MS818 — Gray background on prints diagram (page 320)
Fig. 232 · Gray background on prints

a From the Quality Menu on the printer control panel, decrease

Step 2 Reinstall the imaging unit and the toner cartridge.

a Remove the toner cartridge. b Remove the imaging unit.

Replace the imaging unit, and then resend the print job.

Troubleshooting 320

Page 321 of the Lexmark MS818 user manual — Horizontal voids appear on prints
Page 321 · click to enlarge
Page 321

Horizontal voids appear on prints

Lexmark MS818 — Horizontal voids appear on prints diagram (page 321)
Fig. 233 · Horizontal voids appear on prints

a Make sure your software program is using a correct fill pattern. b Resend the print job.

a Load the specified tray or feeder with a recommended type of

1 Remove the toner cartridge, and then the imaging unit. 2 Firmly shake the imaging unit.

Replace the imaging unit, and then resend the print job.

Troubleshooting 321

Page 322 of the Lexmark MS818 user manual — Incorrect margins on prints
Page 322 · click to enlarge
Page 322

Incorrect margins on prints

ABC DEF ABC DEF

The problem is solved.

Go to step 2.

a Move the width and length guides in the tray to the correct

positions for the paper size loaded. b Resend the print job.

Are the margins correct?

Go to step 3. Do one or more of the following:

From the printer control panel, set the paper size in the Paper menu to match the paper loaded in the tray.

  • Specify the paper size from the tray settings to match the paper loaded in the tray.
  • Change the paper loaded in the tray to match the paper size specified in the tray settings.

Does the paper size match the paper loaded in the tray?

The problem is solved.

Contact customer support.

a Depending on your operating system, specify the paper size

from Printing Preferences or from the Print dialog. b Resend the print job.

Are the margins correct?

Show 5 more labels / short text on this page
Troubleshooting 322 · Action Yes No · Step 1 · Step 2 · Step 3
Page 323 of the Lexmark MS818 user manual — Print irregularities
Page 323 · click to enlarge
Page 323

Paper curl

Go to step 2. Adjust the width and length guides.

Move the width and length guides in the tray to the correct positions for the size of the paper loaded.

Are the width and length guides positioned correctly?

Go to step 3. Specify the paper type and weight from the tray settings to match the paper loaded in the tray.

From the printer control panel, set the paper type and weight in the Paper menu to match the paper loaded in the tray.

Do the paper type and weight match the type and weight of the paper in the tray?

Go to step 4. The problem is solved.

a Depending on your operating system, specify the paper type

and weight from Printing Preferences or from the Print dialog. b Resend the print job.

Is the paper still curled?

Go to step 5. The problem is solved.

a Remove the paper from the tray, and then turn it over. b Resend the print job.

Is the paper still curled?

Contact customer support.

The problem is solved.

a Load paper from a fresh package.

Is the paper still curled?

Print irregularities

) ) ABCDE

ABCDE ABCDE

Show 9 more labels / short text on this page
Troubleshooting 323 · Action Yes No · Step 1 · Step 2 · Step 3 · Step 4 · Step 5 · Leading edge · Trailing edge
Page 324 of the Lexmark MS818 user manual — Paper curl
Page 324 · click to enlarge
Page 324

Go to step 2. The problem is solved.

a Move the width and length guides in the tray to the correct

positions for the size of the paper loaded in the tray. b Resend the print job.

Do print irregularities still appear?

Go to step 3. Specify the paper size and type from the tray settings to match the paper loaded in the tray.

From the printer control panel, set the paper size and type in the Paper menu to match the paper loaded in the tray.

Do the printer settings match the type and weight of the paper loaded in the tray?

Go to step 4. The problem is solved.

a Depending on your operating system, specify the paper type

and weight from Printing Preferences or from the Print dialog. b Resend the print job.

Do print irregularities still appear?

Step 4 Check if the paper loaded in the tray has texture or rough finishes.

From the printer control panel, set the paper texture in the Paper menu to match the paper loaded in the tray.

Go to step 5.

Are you printing on textured or rough paper?

Go to step 6. The problem is solved.

a Load paper from a fresh package.

Do print irregularities still appear?

Contact customer support at http://support.lexm ark.com or your service representative.

The problem is solved.

Replace the imaging unit, and then resend the print job.

Do print irregularities still appear?

Show 7 more labels / short text on this page
Troubleshooting 324 · Action Yes No · Step 1 · Step 2 · Step 3 · Step 5 · Step 6
Page 325 of the Lexmark MS818 user manual — Print is too dark
Page 325 · click to enlarge
Page 325

Print is too dark

ABC DEF ABC DEF

Go to step 2. The problem is solved.

a From the Quality menu on the printer control panel, reduce the

toner darkness.

Is the print still too dark?

Go to step 3. Do one or more of the following:

a From the printer control panel, set the paper type, texture and

  • Specify the paper type, texture, and weight from the tray settings to match the paper loaded in the tray.
  • Change the paper loaded in the tray to match the paper type, texture and weight specified in the tray settings.

weight in the Paper menu to match the paper loaded in the tray. b Resend the print job.

Is the tray set to the type, texture, and weight of the paper loaded?

Go to step 4. The problem is solved.

a Depending on your operating system, specify the paper type,

texture and weight from Printing Preferences or from the Print dialog. b Resend the print job.

Is the print still too dark?

From the printer control panel, change the texture settings in the Paper Texture menu to match the paper you are printing on.

Go to step 5.

Check if the paper loaded in the tray has texture or rough finishes.

Are you printing on textured or rough paper?

Show 6 more labels / short text on this page
Troubleshooting 325 · Action Yes No · Step 1 · Step 2 · Step 3 · Step 4
Page 326 of the Lexmark MS818 user manual — Print is too light
Page 326 · click to enlarge
Page 326

Go to step 6. The problem is solved.

a Load paper from a fresh package.

Is the print still too dark?

Contact customer support.

The problem is solved.

Replace the imaging unit, and then resend the print job.

Is the print still too dark?

Print is too light

ABC DEF

Go to step 2. The problem is solved.

a From the Quality menu on the printer control panel, increase

the toner darkness.

Is the print still too light?

Go to step 3. Change the paper type, texture, and weight to match the paper loaded in the tray.

From the printer control panel, set the paper type, texture, and weight in the Paper menu to match the paper loaded in the tray.

Is the tray set to the type, texture, and weight of the paper loaded?

Go to step 4. The problem is solved.

a Depending on your operating system, specify the paper type,

texture, and weight from Printing Preferences or from the Print dialog. b Resend the print job.

Is the print still too light?

Show 8 more labels / short text on this page
Troubleshooting 326 · Action Yes No · Step 5 · Step 6 · Action Yes No · Step 1 · Step 2 · Step 3
Page 327 of the Lexmark MS818 user manual — Printer is printing blank pages
Page 327 · click to enlarge
Page 327

From the printer control panel, change the texture settings in the Paper Texture menu to match the paper you are printing on.

Go to step 5.

Make sure that the paper has no texture or rough finishes.

Are you printing on textured or rough paper?

Go to step 6. The problem is solved.

a Load paper from a fresh package.

Is the print still too light?

Go to step 7. The problem is solved.

a Redistribute the toner in the imaging unit.

1 Remove the toner cartridge, and then the imaging unit. 2 Firmly shake the imaging unit.

Is the print still too light?

Contact customer support.

The problem is solved.

Replace the imaging unit, and then resend the print job.

Is the print still too light?

Printer is printing blank pages

Show 6 more labels / short text on this page
Troubleshooting 327 · Action Yes No · Step 4 · Step 5 · Step 6 · Step 7
Page 328 of the Lexmark MS818 user manual — Printer is printing solid black pages
Page 328 · click to enlarge
Page 328

Go to step 2. The problem is solved.

a Check if there is packing material left on the imaging unit.

1 Remove the toner cartridge, and then the imaging unit. 2 Check if the packing material is properly removed from the imaging unit.

Is the printer still printing blank pages?

Go to step 3. The problem is solved.

a Redistribute the toner in the imaging unit.

1 Remove the toner cartridge, and then the imaging unit. 2 Firmly shake the imaging unit.

Is the printer still printing blank pages?

Step 3 Replace the imaging unit, and then resend the print job.

Contact customer support.

The problem is solved.

Is the printer still printing blank pages?

Printer is printing solid black pages

Show 4 more labels / short text on this page
Troubleshooting 328 · Action Yes No · Step 1 · Step 2
Page 329 of the Lexmark MS818 user manual — Repeating defects appear on prints
Page 329 · click to enlarge
Page 329

Go to step 2. The problem is solved.

a Reinstall the imaging unit.

1 Remove the toner cartridge, and then the imaging unit.

Is the printer printing solid black pages?

Contact customer support.

The problem is solved.

Replace the imaging unit, and then resend the print job.

Is the printer printing solid black pages?

Repeating defects appear on prints

Go to step 2. The problem is solved.

a Replace the imaging unit if the distance between the defects is

equal to any of the following:

  • 47.8 mm (1.88 in.)
  • 96.8 mm (3.81 in.)
  • 28.5 mm (1.12 in.) b Resend the print job.

Do repeating defects still appear on prints?

Contact customer support.

The problem is solved.

a Replace the fuser if the distance between the defects is equal

to either of the following:

  • 94.25 mm (3.71 in.)
  • 95.2 mm (3.75 in.) b Resend the print job.

Do repeating defects still appear on prints?

Show 9 more labels / short text on this page
Troubleshooting 329 · Action Yes No · Step 1 · Step 2 · ) ) ) · ) ) ) · Action Yes No · Step 1 · Step 2
Page 330 of the Lexmark MS818 user manual — Skewed print
Page 330 · click to enlarge
Page 330

Shadow images appear on prints

Lexmark MS818 — Shadow images appear on prints diagram (page 330)
Fig. 234 · Shadow images appear on prints

ABCD

Go to step 2. Load paper with the correct paper type and weight in the tray.

Load paper with the correct paper type and weight in the tray.

Is paper with the correct paper type and weight loaded in the tray?

Go to step 3. Change the paper loaded in the tray to match the paper type and weight specified in the tray settings.

From the printer control panel, set the paper type and weight in the Paper menu to match the paper loaded in the tray.

Is the tray set to the type and weight of the paper loaded?

Go to step 4. The problem is solved.

a Depending on your operating system, specify the paper type

and weight from Printing Preferences or from the Print dialog. b Resend the print job.

Do shadow images still appear on prints?

Contact customer support.

The problem is solved.

Replace the imaging unit, and then resend the print job.

Do shadow images still appear on prints?

Skewed print

) ) ABCDE

ABCDE ABCDE

Show 8 more labels / short text on this page
Troubleshooting 330 · Leading edge · Trailing edge · Action Yes No · Step 1 · Step 2 · Step 3 · Step 4
Page 331 of the Lexmark MS818 user manual — Streaked horizontal lines appear on prints
Page 331 · click to enlarge
Page 331

Go to step 2. The problem is solved.

a Move the width and length guides in the tray to the correct

positions for the size of the paper loaded. b Resend the print job.

Is the print still skewed?

Contact customer support.

The problem is solved.

a Check if you are printing on a paper that is supported by the

tray. b Resend the print job.

Is the print still skewed?

Streaked horizontal lines appear on prints

ABCDE ABCDE ABCDE

Go to step 2. The problem is solved.

a Depending on your operating system, specify the tray or feeder

from Printing Preferences or the Print dialog. b Resend the print job.

Do streaked horizontal lines appear on prints?

Go to step 3. Change the paper type and weight to match the paper loaded in the tray.

From the printer control panel, set the paper type and weight in the Paper menu to match the paper loaded in the tray.

Do the paper type and weight match the type and weight of the paper in the tray?

Go to step 4. The problem is solved.

a Load paper from a fresh package.

Do streaked horizontal lines appear on prints?

Show 8 more labels / short text on this page
Troubleshooting 331 · Action Yes No · Step 1 · Step 2 · Action Yes No · Step 1 · Step 2 · Step 3
Page 332 of the Lexmark MS818 user manual — Streaked vertical lines appear on prints
Page 332 · click to enlarge
Page 332
Lexmark MS818 — Streaked vertical lines appear on prints diagram (page 332)
Fig. 235 · Streaked vertical lines appear on prints

1 Remove the toner cartridge, and then the imaging unit.

Replace the imaging unit, and then resend the print job.

Streaked vertical lines appear on prints

Lexmark MS818 — Streaked vertical lines appear on prints diagram (page 332)
Fig. 236 · Streaked vertical lines appear on prints

a Depending on your operating system, specify the paper type,

texture, and weight from Printing Preferences or from the Print dialog. b Resend the print job.

Troubleshooting 332

Page 333 of the Lexmark MS818 user manual — Streaked vertical lines appear on prints
Page 333 · click to enlarge
Page 333

Go to step 3. Do one or more of the following:

From the printer control panel, set the paper texture, type, and weight in the Paper menu to match the paper loaded in the tray.

  • Specify the paper texture, type, and weight from the tray settings to match the paper loaded in the tray.
  • Change the paper loaded in the tray to match the paper texture, type, and weight specified in the tray settings.

Do the paper texture, type, and weight match the paper in the tray?

Go to step 4. The problem is solved.

a Load paper from a fresh package.

Do streaked vertical lines appear on prints?

Go to step 5. The problem is solved.

a Reinstall the imaging unit.

1 Remove the toner cartridge, and then the imaging unit.

Do streaked vertical lines appear on prints?

Step 5 Replace the imaging unit, and then resend the print job.

Contact customer support at http://support.lexm ark.com or your service representative.

The problem is solved.

Do streaked vertical lines appear on prints?

Show 5 more labels / short text on this page
Troubleshooting 333 · Action Yes No · Step 2 · Step 3 · Step 4
Page 334 of the Lexmark MS818 user manual — Toner rubs off
Page 334 · click to enlarge
Page 334

Toner fog or background shading appears on prints

Lexmark MS818 — Toner fog or background shading appears on prints diagram (page 334)
Fig. 237 · Toner fog or background shading appears on prints

1 Remove the toner cartridge, and then the imaging unit.

Did the toner fog or background shading disappear from the prints?

Replace the imaging unit, and then resend the print job.

Did the toner fog or background shading disappear from the prints?

Toner rubs off

ABC DEF

Troubleshooting 334 · Leading edge · Trailing edge

Page 335 of the Lexmark MS818 user manual — Uneven print density
Page 335 · click to enlarge
Page 335

Step 1 From the Paper menu on the printer control panel, check the paper type, texture, and weight.

Go to step 2. Specify the paper type, texture, and weight from the tray settings to match the paper loaded in the tray.

Do the paper type, texture, and weight match the paper loaded in the tray?

Contact customer support.

The problem is solved.

Resend the print job.

Does the toner still rub off?

Toner specks appear on prints

Replace the imaging unit, and then resend the print job.

Contact customer support.

The problem is solved.

Do toner specks appear on prints?

Transparency print quality is poor

Go to step 2. Set the paper type to Transparency.

From the printer control panel, set the paper type in the Paper menu to match the paper loaded in the tray.

Is the paper type for the tray set to Transparency?

Contact customer support.

The problem is solved.

a Check if you are using a recommended type of transparency. b Resend the print job.

Is the print quality still poor?

Uneven print density

Show 7 more labels / short text on this page
Troubleshooting 335 · Action Yes No · Step 2 · Action Yes No · Action Yes No · Step 1 · Step 2
Page 336 of the Lexmark MS818 user manual — Vertical voids appear on prints
Page 336 · click to enlarge
Page 336
Lexmark MS818 — Vertical voids appear on prints diagram (page 336)
Fig. 238 · Vertical voids appear on prints

Replace the imaging unit, and then resend the print job.

Vertical voids appear on prints

Go to step 2. The problem is solved.

a Make sure your software program is using a correct fill pattern. b Resend the print job.

Do vertical voids appear on prints?

Go to step 3. The problem is solved.

a From the printer control panel, set the paper type and weight

in the Paper menu to match the paper loaded in the tray. b Resend the print job.

Do vertical voids appear on prints?

Go to step 4. The problem is solved.

Check if you are using a recommended type of paper.

a Load the specified tray or feeder with a recommended type of

paper. b Resend the print job.

Do vertical voids appear on prints?

Go to step 5. The problem is solved.

a Redistribute the toner in the imaging unit.

1 Remove the toner cartridge, and then the imaging unit. 2 Firmly shake the imaging unit.

Do vertical voids appear on prints?

Show 8 more labels / short text on this page
Troubleshooting 336 · Leading edge · Trailing edge · Action Yes No · Step 1 · Step 2 · Step 3 · Step 4
Page 337 of the Lexmark MS818 user manual — An application error has occurred
Page 337 · click to enlarge
Page 337

Contact customer support.

The problem is solved.

Replace the imaging unit, and then resend the print job.

Do vertical voids appear on prints?

Solving home screen application problems

This troubleshooting section applies only to touch-screen printer models.

An application error has occurred

Go to step 2. Contact customer support.

Check the system log for relevant details.

a Open a Web browser, and then type the printer IP address in

the address field.

If you do not know the IP address of the printer, then you can:

  • View the IP address on the printer home screen.
  • Print a network setup page or the menu settings pages, and then locate the IP address in the TCP/IP section.

Log. c From the Filter menu, select an application status. d From the Application menu, select an application, and then

click Submit. Does an error message appear in the log?

The problem is solved.

Contact customer support.

Resolve the error. Is the application working now?

Show 6 more labels / short text on this page
Troubleshooting 337 · Action Yes No · Step 5 · Action Yes No · Step 1 · Step 2
Page 338 of the Lexmark MS818 user manual — Embedded Web Server does not open
Page 338 · click to enlarge
Page 338

Embedded Web Server does not open

Go to step 2. Type the correct printer IP address in the address field of your Web browser.

Make sure the printer IP address is correct.

View the printer IP address:

  • From the printer home screen
  • From the TCP/IP section in the Network/Ports menu
  • By printing a network setup page or menu settings page, and then finding the TCP/IP section

Is the printer IP address correct?

Go to step 3. Turn on the printer.

Check if the printer is turned on.

Is the printer turned on?

Go to step 4. Contact your system support person.

Check if the network connection is working.

Is the network connection working?

Step 4 Make sure the cable connections to the printer and print server are secure.

Go to step 5. Tighten the cable connection.

For more information, see the setup documentation that came with the printer.

Are the cable connections to the printer and print server secure?

Go to step 6. Contact your system support person.

Temporarily disable the Web proxy servers.

Are the Web proxy servers disabled?

Step 6 Access the Embedded Web Server again by typing the correct IP address in the address field.

The problem is solved.

Contact customer support.

Did the Embedded Web Server open?

Show 6 more labels / short text on this page
Troubleshooting 338 · Action Yes No · Step 1 · Step 2 · Step 3 · Step 5
Page 339 of the Lexmark MS818 user manual — Contacting customer support
Page 339 · click to enlarge
Page 339

Contacting customer support

Before contacting customer support, make sure to have the following information:

  • Printer problem
  • Error message
  • Printer model type and serial number

Go to http://support.lexmark.com to receive e‑mail or chat support, or browse through the library of manuals, support documentation, drivers, and other downloads.

Technical support via telephone is also available. In the U.S. or Canada, call 1-800-539-6275. For other countries or regions, go to http://support.lexmark.com.

Troubleshooting 339

Page 340 of the Lexmark MS818 user manual — GOVERNMENT END USERS
Page 340 · click to enlarge
Page 340

Notices

Product information

Product name:

Lexmark MS810de, MS810dn, MS810n, MS811dn, MS811n, MS812de, MS812dn, MS817dn, MS817n, MS818dn

Machine type:

Model(s):

210, 230, 23E, 410, 430, 630, 63E

Edition notice

The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you.

This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in later editions. Improvements or changes in the products or the programs described may be made at any time.

References in this publication to products, programs, or services do not imply that the manufacturer intends to make these available in all countries in which it operates. Any reference to a product, program, or service is not intended to state or imply that only that product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any existing intellectual property right may be used instead. Evaluation and verification of operation in conjunction with other products, programs, or services, except those expressly designated by the manufacturer, are the user’s responsibility.

For Lexmark technical support, visit http://support.lexmark.com.

For information on supplies and downloads, visit www.lexmark.com.

© 2017 Lexmark International, Inc.

All rights reserved.

GOVERNMENT END USERS

The Software Program and any related documentation are "Commercial Items," as that term is defined in 48 C.F.R. 2.101, "Computer Software" and "Commercial Computer Software Documentation," as such terms are used in 48 C.F.R. 12.212 or 48 C.F.R. 227.7202, as applicable. Consistent with 48 C.F.R. 12.212 or 48 C.F.R. 227.7202-1 through 227.7207-4, as applicable, the Commercial Computer Software and Commercial Software Documentation are licensed to the U.S. Government end users (a) only as Commercial Items and (b) with only those rights as are granted to all other end users pursuant to the terms and conditions herein.

May 2017

Page 341 of the Lexmark MS818 user manual — Trademarks
Page 341 · click to enlarge
Page 341

Trademarks

Lexmark, the Lexmark logo, MarkNet, and MarkVision are trademarks or registered trademarks of Lexmark International, Inc. in the United States and/or other countries.

Google Cloud Print is a trademark of Google Inc.

Mac and the Mac logo are trademarks of Apple Inc., registered in the U.S. and other countries.

Microsoft and Windows are either registered trademarks or trademarks of the Microsoft group of companies in the United States and other countries.

Mopria®, the Mopria® logo, and the Mopria® Alliance logo are registered trademarks and service marks of Mopria Alliance, Inc. in the United States and other countries. Unauthorized use is strictly prohibited.

PCL® is a registered trademark of the Hewlett-Packard Company. PCL is Hewlett-Packard Company’s designation of a set of printer commands (language) and functions included in its printer products. This printer is intended to be compatible with the PCL language. This means the printer recognizes PCL commands used in various application programs, and that the printer emulates the functions corresponding to the commands.

PostScript is a registered trademark of Adobe Systems Incorporated in the United States and/or other countries.

The following terms are trademarks or registered trademarks of these companies:

Albertus The Monotype Corporation plc

Antique Olive Monsieur Marcel OLIVE

Apple-Chancery Apple Computer, Inc.

Arial The Monotype Corporation plc

CG Times Based on Times New Roman under license from The Monotype Corporation plc, is a product of Agfa Corporation

Chicago Apple Computer, Inc.

Clarendon Linotype-Hell AG and/or its subsidiaries

Geneva Apple Computer, Inc.

GillSans The Monotype Corporation plc

Helvetica Linotype-Hell AG and/or its subsidiaries

Hoefler Jonathan Hoefler Type Foundry

ITC Avant Garde Gothic International Typeface Corporation

ITC Bookman International Typeface Corporation

ITC Mona Lisa International Typeface Corporation

ITC Zapf Chancery International Typeface Corporation

Joanna The Monotype Corporation plc

Monaco Apple Computer, Inc.

New York Apple Computer, Inc.

Eurostile Nebiolo · Marigold Arthur Baker · Oxford Arthur Baker

Page 342 of the Lexmark MS818 user manual — Waste from Electrical and Electronic Equipment (WEEE) directive
Page 342 · click to enlarge
Page 342

Palatino Linotype-Hell AG and/or its subsidiaries

Stempel Garamond Linotype-Hell AG and/or its subsidiaries

Times New Roman The Monotype Corporation plc

Univers Linotype-Hell AG and/or its subsidiaries

All other trademarks are the property of their respective owners.

AirPrint and the AirPrint logo are trademarks of Apple, Inc.

Licensing notices

All licensing notices associated with this product can be viewed from the root directory of the installation software CD.

Noise emission levels

The following measurements were made in accordance with ISO 7779 and reported in conformance with ISO 9296.

1-meter average sound pressure, dBA

Printing 57 (MS810n, MS810dn, MS811n, MS811dn, MS812dn, MS817n, MS817dn, and MS818dn); 58 (MS810de and MS812de)

Ready 32 (all models)

Values are subject to change. See www.lexmark.com for current values.

Waste from Electrical and Electronic Equipment (WEEE) directive

The WEEE logo signifies specific recycling programs and procedures for electronic products in countries of the European Union. We encourage the recycling of our products.

If you have further questions about recycling options, visit the Lexmark Web site at www.lexmark.com for your local sales office phone number.

Taffy Agfa Corporation

Page 343 of the Lexmark MS818 user manual — Temperature information
Page 343 · click to enlarge
Page 343

India E-Waste notice

This product complies with the India E-Waste (Management and Handling) Rules, 2011, which prohibit use of lead, mercury, hexavalent chromium, polybrominated biphenyls, or polybrominated diphenyl ethers in concentrations exceeding 0.1% by weight and 0.01% by weight for cadmium, except for the exemption set in Schedule II of the Rules.

Product disposal

Do not dispose of the printer or supplies in the same manner as normal household waste. Consult your local authorities for disposal and recycling options.

Static sensitivity notice

This symbol identifies static-sensitive parts. Do not touch the areas near these symbols without first touching a metal surface in an area away from the symbol.

ENERGY STAR

Any Lexmark product bearing the ENERGY STAR emblem on the product or on a start-up screen is certified to comply with Environmental Protection Agency (EPA) ENERGY STAR requirements as configured when shipped by Lexmark.

Temperature information

Ambient operating temperature 15.6 to 32.2°C (60 to 90°F)

Shipping temperature -40 to 43.3°C (-40 to 110°F)

Storage temperature and relative humidity 1 to 35°C (34 to 95°F)

8 to 80% RH

Page 344 of the Lexmark MS818 user manual — N/A
Page 344 · click to enlarge
Page 344

Laser notice

The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR Chapter I, Subchapter J for Class I (1) laser products, and elsewhere is certified as a Class I laser product conforming to the requirements of IEC 60825-1: 2014.

Class I laser products are not considered to be hazardous. The printer contains internally a Class IIIb (3b) laser that is nominally a 15‑milliwatt gallium arsenide laser operating in the wavelength of 787–800 nanometers. The laser system and printer are designed so there is never any human access to laser radiation above a Class I level during normal operation, user maintenance, or prescribed service condition.

Laser advisory label

A laser notice label may be affixed to this printer as shown:

Opasnost - Nevidljivo lasersko zračenje kada su kasete uklonjene i poništena sigurnosna veza. Izbjegavati izlaganje zracima.

NEBEZPEČÍ - Když jsou vyjmuty kazety a je odblokována pojistka, ze zařízení je vysíláno neviditelné laserové záření. Nevystavujte se působení laserového paprsku. FARE - Usynlig laserstråling, når patroner fjernes, og spærreanordningen er slået fra. Undgå at blive udsat for laserstrålen.

VAARA - Näkymätöntä lasersäteilyä on varottava, kun värikasetit on poistettu ja lukitus on auki. Vältä lasersäteelle altistumista. GEFAHR - Unsichtbare Laserstrahlung beim Herausnehmen von Druckkassetten und offener Sicherheitssperre. Laserstrahl meiden.

ΚΙΝΔΥΝΟΣ - Έκλυση αόρατης ακτινοβολίας laser κατά την αφαίρεση των κασετών και την απασφάλιση της μανδάλωσης. Αποφεύγετε την έκθεση στην ακτινοβολία laser. VESZÉLY – Nem látható lézersugárzás fordulhat elő a patronok eltávolításakor és a zárószerkezet felbontásakor. Kerülje a lézersugárnak való kitettséget.

FARE – Usynlig laserstråling når kassettene tas ut og sperren er satt ut av spill. Unngå eksponering for laserstrålen. NIEBEZPIECZEŃSTWO - niewidzialne promieniowanie laserowe podczas usuwania kaset i blokady. Należy unikać naświetlenia promieniem lasera.

ОПАСНО! Невидимое лазерное излучение при извлеченных картриджах и снятии блокировки. Избегайте воздействия лазерных лучей. Pozor – Nebezpečenstvo neviditeľného laserového žiarenia pri odobratých kazetách a odblokovanej poistke. Nevystavujte sa lúčom.

危险 - 当移除碳粉盒及互锁失效时会产生看不见的激光辐射,请避免暴露在激光光束下。

危險 - 移除碳粉匣與安全連續開關失效時會產生看不見的雷射輻射。請避免曝露在雷射光束下。 危険 - カートリッジが取り外され、内部ロックが無効になると、見えないレーザー光が放射されます。 このレーザー光に当たらないようにしてください。

Power consumption

Product power consumption

The following table documents the power consumption characteristics of the product.

Mode Description Power consumption (Watts)

Printing The product is generating hard‑copy output from electronic inputs.

670 (MS810n, MS810dn, MS817n, and MS817dn); 700 (MS810de); 770 (MS811n, MS811dn, and MS818dn); 830 (MS812dn and MS812de)

Copy The product is generating hard‑copy output from hard‑copy original documents.

N/A

Page 345 of the Lexmark MS818 user manual — Hibernate Mode
Page 345 · click to enlarge
Page 345

Mode Description Power consumption (Watts)

Scan The product is scanning hard‑copy documents. N/A

Ready The product is waiting for a print job. Ready 1: 55 (MS810n, MS810dn, MS811n, MS811dn, MS812dn, MS817n, MS817dn, and MS818dn); 60 (MS810de and MS812de); Ready 2: 30 (All printer models)

Sleep Mode The product is in a high‑level energy‑saving

2.9 (MS810n, MS810dn, MS811n, MS811dn, MS812dn, MS817n, MS817dn, and MS818dn); 3.3 (MS810de); 3.7 (MS812de)

mode.

Hibernate The product is in a low‑level energy‑saving mode.

0.5 (MS810n, MS810dn, MS811n, MS811dn, MS812dn, MS810de, MS817n, MS817dn, and MS818dn); 0.6 (MS812de)

Off The product is plugged into an electrical outlet, but the power switch is turned off.

The power consumption levels listed in the previous table represent time-averaged measurements. Instantaneous power draws may be substantially higher than the average.

Values are subject to change. See www.lexmark.com for current values.

Sleep Mode

This product is designed with an energy-saving mode called Sleep Mode. The Sleep Mode saves energy by lowering power consumption during extended periods of inactivity. The Sleep Mode is automatically engaged after this product is not used for a specified period of time, called the Sleep Mode Timeout.

Factory default Sleep Mode Timeout for this product (in minutes): 20

By using the configuration menus, the Sleep Mode Timeout can be modified between 1 minute and 120 minutes. Setting the Sleep Mode Timeout to a low value reduces energy consumption, but may increase the response time of the product. Setting the Sleep Mode Timeout to a high value maintains a fast response, but uses more energy.

Hibernate Mode

This product is designed with an ultra‑low power operating mode called Hibernate mode. When operating in Hibernate Mode, all other systems and devices are powered down safely.

The Hibernate mode can be entered in any of the following methods:

  • Using the Hibernate Timeout
  • Using the Schedule Power modes
  • Using the Sleep/Hibernate button

Factory default Hibernate Timeout for this product in all countries or regions 3 days

The amount of time the printer waits after a job is printed before it enters Hibernate mode can be modified between one hour and one month.

Page 346 of the Lexmark MS818 user manual — Multiple model information
Page 346 · click to enlarge
Page 346

Off mode

If this product has an off mode which still consumes a small amount of power, then to completely stop product power consumption, disconnect the power supply cord from the electrical outlet.

Total energy usage

It is sometimes helpful to calculate the total product energy usage. Since power consumption claims are provided in power units of Watts, the power consumption should be multiplied by the time the product spends in each mode in order to calculate energy usage. The total product energy usage is the sum of each mode's energy usage.

Patent acknowledgment

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for Elliptic Curve Cryptography (ECC) Cipher Suites for Transport Layer Security (TLS) implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for TLS Elliptic Curve Cipher Suites with SHA-256/382 and AES Galois Counter Mode (GCM) implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for TLS Suite B Profile for Transport Layer Security (TLS) implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for Addition of the Camellia Cipher Suites to Transport Layer Security (TLS) implemented in the product or service.

The use of certain patents in this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for AES-CCM ECC Cipher Suites for TLS implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for IKE and IKEv2 Authentication Using the Eliptic Curve Digital Signature Algorithm (ECDSA) implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for Suite B Cryptographic Suites for IPSec implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for Algorithms for Internet Key Exchange version 1 (IKEv1) implemented in the product or service.

Multiple model information

The following information applies to all MS810, MS811, MS812, MS817, and MS818 printer models except for the MS812de printer model.

Page 347 of the Lexmark MS818 user manual — Limited warranty service
Page 347 · click to enlarge
Page 347

STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUNCTION LASER

PRINTERS

Lexmark International, Inc., Lexington, KY

This limited warranty applies to the United States and Canada. For customers outside the U.S., refer to the country-specific warranty information that came with your product.

This limited warranty applies to this product only if it was originally purchased for your use, and not for resale, from Lexmark or a Lexmark Remarketer, referred to in this statement as “Remarketer.”

Limited warranty

Lexmark warrants that this product:

—Is manufactured from new parts, or new and serviceable used parts, which perform like new parts

—Is, during normal use, free from defects in material and workmanship

If this product does not function as warranted during the warranty period, contact a Remarketer or Lexmark for repair or replacement (at Lexmark's option).

If this product is a feature or option, this statement applies only when that feature or option is used with the product for which it was intended. To obtain warranty service, you may be required to present the feature or option with the product.

If you transfer this product to another user, warranty service under the terms of this statement is available to that user for the remainder of the warranty period. You should transfer proof of original purchase and this statement to that user.

Limited warranty service

The warranty period starts on the date of original purchase as shown on the purchase receipt and ends 12 months later provided that the warranty period for any supplies and for any maintenance items included with the printer shall end earlier if it, or its original contents, are substantially used up, depleted, or consumed. Fuser Units, Transfer/Transport Units, Paper Feed items, if any, and any other items for which a Maintenance Kit is available are substantially consumed when the printer displays a “Life Warning” or “Scheduled Maintenance” message for such item.

To obtain warranty service you may be required to present proof of original purchase. You may be required to deliver your product to the Remarketer or Lexmark, or ship it prepaid and suitably packaged to a Lexmark designated location. You are responsible for loss of, or damage to, a product in transit to the Remarketer or the Lexmark designated location.

When warranty service involves the exchange of a product or part, the item replaced becomes the property of the Remarketer or Lexmark. The replacement may be a new or repaired item.

The replacement item assumes the remaining warranty period of the original product.

Replacement is not available to you if the product you present for exchange is defaced, altered, in need of a repair not included in warranty service, damaged beyond repair, or if the product is not free of all legal obligations, restrictions, liens, and encumbrances.

Page 348 of the Lexmark MS818 user manual — Limitation of liability
Page 348 · click to enlarge
Page 348

As part of your warranty service and/or replacement, Lexmark may update the firmware in your printer to the latest version. Firmware updates may modify printer settings and cause counterfeit and/or unauthorized products, supplies, parts, materials (such as toners and inks), software, or interfaces to stop working. Authorized use of genuine Lexmark products will not be impacted.

Before you present this product for warranty service, remove all print cartridges, programs, data, and removable storage media (unless directed otherwise by Lexmark).

For further explanation of your warranty alternatives and the nearest Lexmark authorized servicer in your area contact Lexmark on the World Wide Web.

Remote technical support is provided for this product throughout its warranty period. For products no longer covered by a Lexmark warranty, technical support may not be available or only be available for a fee.

Extent of limited warranty

Lexmark does not warrant uninterrupted or error-free operation of any product or the durability or longevity of prints produced by any product.

Warranty service does not include repair of failures caused by:

—Modification or unauthorized attachments

—Accidents, misuse, abuse or use inconsistent with Lexmark user’s guides, manuals, instructions or guidance

—Unsuitable physical or operating environment

—Maintenance by anyone other than Lexmark or a Lexmark authorized servicer

—Operation of a product beyond the limit of its duty cycle

—Use of printing media outside of Lexmark specifications

—Refurbishment, repair, refilling or remanufacture by a third party of products, supplies or parts

—Products, supplies, parts, materials (such as toners and inks), software, or interfaces not furnished by Lexmark

TO THE EXTENT PERMITTED BY APPLICABLE LAW, NEITHER LEXMARK NOR ITS THIRD PARTY SUPPLIERS OR REMARKETERS MAKE ANY OTHER WARRANTY OR CONDITION OF ANY KIND, WHETHER EXPRESS OR IMPLIED, WITH RESPECT TO THIS PRODUCT, AND SPECIFICALLY DISCLAIM THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND SATISFACTORY QUALITY. ANY WARRANTIES THAT MAY NOT BE DISCLAIMED UNDER APPLICABLE LAW ARE LIMITED IN DURATION TO THE WARRANTY PERIOD. NO WARRANTIES, EXPRESS OR IMPLIED, WILL APPLY AFTER THIS PERIOD. ALL INFORMATION, SPECIFICATIONS, PRICES, AND SERVICES ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE.

Limitation of liability

Your sole remedy under this limited warranty is set forth in this document. For any claim concerning performance or nonperformance of Lexmark or a Remarketer for this product under this limited warranty, you may recover actual damages up to the limit set forth in the following paragraph.

Lexmark's liability for actual damages from any cause whatsoever will be limited to the amount you paid for the product that caused the damages. This limitation of liability will not apply to claims by you for bodily injury or damage to real property or tangible personal property for which Lexmark is legally liable. IN NO EVENT WILL LEXMARK BE LIABLE FOR ANY LOST PROFITS, LOST SAVINGS, INCIDENTAL DAMAGE, OR OTHER ECONOMIC OR CONSEQUENTIAL DAMAGES. This is true even if you advise Lexmark or a Remarketer of the possibility of such damages. Lexmark is not liable for any claim by you based on a third party claim.

Page 349 of the Lexmark MS818 user manual — Federal Communications Commission (FCC) compliance information statement
Page 349 · click to enlarge
Page 349

This limitation of remedies also applies to claims against any Suppliers and Remarketers of Lexmark. Lexmark's and its Suppliers' and Remarketers' limitations of remedies are not cumulative. Such Suppliers and Remarketers are intended beneficiaries of this limitation.

Additional rights

Some states do not allow limitations on how long an implied warranty lasts, or do not allow the exclusion or limitation of incidental or consequential damages, so the limitations or exclusions contained above may not apply to you.

This limited warranty gives you specific legal rights. You may also have other rights that vary from state to state.

Federal Communications Commission (FCC) compliance information statement

This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The FCC Class B limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult your point of purchase or service representative for additional suggestions.

The manufacturer is not responsible for radio or television interference caused by using other than recommended cables or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void the user's authority to operate this equipment.

Any questions regarding this compliance information statement should be directed to:

Director of Lexmark Technology & Services Lexmark International, Inc. 740 West New Circle Road Lexington, KY 40550 (859) 232–3000

Page 350 of the Lexmark MS818 user manual — Model ‑ specific information
Page 350 · click to enlarge
Page 350

Industry Canada compliance statement

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Standard ICES-003.

Avis de conformité aux normes de l’industrie du Canada

Cet appareil numérique de classe B est conforme aux exigences de la norme canadienne relative aux équipements pouvant causer des interférences NMB-003.

日本の VCCI 規定

製品にこのマークが表示されている場合、次の要件を満たしています。

この装置は、クラス B 情報技術装置です。この装置は、家庭環境で使用することを目的としていますが、この 装置がラジオやテレビジョン受信機に近接して使用されると、受信障害を引き起こすことがあります。

取扱説明書に従って正しい取り扱いをしてください。

VCCI-B

European Community (EC) directives conformity

This product is in conformity with the protection requirements of EC Council directives 2014/30/EU, 2014/35/EU, 2009/125/EC, and 2011/65/EU on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility, safety of electrical equipment designed for use within certain voltage limits, the ecodesign of energy-related products, and on the restrictions of use of certain hazardous substances in electrical and electronic equipment.

The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY. A declaration of conformity to the requirements of the Directives is available upon request from the Authorized Representative or may be obtained at www.lexmark.com/en_us/about/regulatory-compliance/european-union-declaration-of-conformity.html.

This product satisfies the Class B limits of EN 55022 and EN55032 and safety requirements of EN 60950‑1 or EN 62368-1.

Model ‑ specific information

The following information applies only to the MS812de printer model.

Page 351 of the Lexmark MS818 user manual — European Community (EC) directives conformity
Page 351 · click to enlarge
Page 351

Federal Communications Commission (FCC) compliance information statement

This product has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The FCC Class A limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense.

The manufacturer is not responsible for any radio or television interference caused by using other than recommended cables or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void the user's authority to operate this equipment.

Industry Canada compliance statement

This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Standard ICES-003.

Avis de conformité aux normes de l’industrie du Canada

Cet appareil numérique de classe A est conforme aux exigences de la norme canadienne relative aux équipements pouvant causer des interférences NMB-003.

Japanese VCCI notice

Lexmark MS818 — Japanese VCCI notice diagram (page 351)
Fig. 239 · Japanese VCCI notice

European Community (EC) directives conformity

This product is in conformity with the protection requirements of EC Council directives 2014/30/EU, 2014/35/EU, and 2011/65/EU on the approximation and harmonization of the laws of the Member States relating to

Page 352 of the Lexmark MS818 user manual — Radio interference notice
Page 352 · click to enlarge
Page 352

electromagnetic compatibility, safety of electrical equipment designed for use within certain voltage limits, and on the restrictions of use of certain hazardous substances in electrical and electronic equipment.

The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY. A declaration of conformity to the requirements of the Directives is available upon request from the Authorized Representative or may be obtained at www.lexmark.com/en_us/about/regulatory-compliance/european-union-declaration-of-conformity.html.

This product satisfies the Class A limits of EN 55022 and EN55032 and safety requirements of EN 60950‑1 or EN 62368-1.

Radio interference notice

This is a product that complies with the emission requirements of EN55022 and EN55032 Class A limits and immunity requirements of EN55024. This product is not intended to be used in residential/domestic environments.

This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

Page 354 of the Lexmark MS818 user manual — Table of contents
Page 354 · click to enlarge
Page 354

Table of contents

Contentsp.2Safety informationp.5Conventionsp.5Overviewp.8Using this guidep.8Finding information about the printerp.8Selecting a location for the printerp.10Additional printer setupp.12Installing internal optionsp.12Available internal optionsp.12Accessing the controller boardp.12Installing a memory cardp.16Installing an Internal Solutions Portp.17Installing an optional cardp.22Installing a printer hard diskp.23Removing a printer hard diskp.27Installing hardware optionsp.29Order of installationp.29Installing optional traysp.30Attaching cablesp.33Setting up the printer softwarep.35Installing the printer softwarep.35Adding available options in the print driverp.35Networkingp.36Preparing to set up the printer on an Ethernet networkp.36Preparing to set up the printer on a wireless networkp.36Connecting the printer to a network using the Wireless Setup Wizardp.37Connecting the printer to a wireless network using the Wi-Fi Protected Setupp.38Connecting the printer to a wireless network using the Embedded Web Serverp.39Setting up serial printing (Windows only)p.40Verifying printer setupp.40Using MS810n, MS810dn, MS811n, MS811dn, MS812dn, MS817n, MS817dn, MS818dnp.41Learning about the printerp.41Printer configurationsp.41Using the printer control panelp.43Understanding the colors of the Sleep button and indicator lightsp.44Loading paper and specialty mediap.44Setting the paper size and typep.44Configuring Universal paper settingsp.44Loading the 250or 550-sheet trayp.45Loading the 2100-sheet trayp.52Loading the multipurpose feederp.59Linking and unlinking traysp.64Linking and unlinking traysp.64Creating a custom name for a paper typep.64Assigning a custom paper typep.65Printingp.66Printing a documentp.66Printing from a computerp.66Adjusting toner darknessp.66Printing from a flash drivep.67Printing from a flash drivep.67Supported flash drives and file typesp.68Printing from a mobile devicep.69Printing from a mobile device using Mopria Print Servicep.69Printing from a mobile device using Google Cloud Printp.69Printing from a mobile device using AirPrintp.69Printing from a mobile device using Lexmark Mobile Printp.70Printing confidential and other held jobsp.70Storing print jobs in the printerp.70Printing held jobsp.71Printing information pagesp.71Printing a font sample listp.71Printing a directory listp.71Canceling a print jobp.71Canceling a print job from the printer control panelp.71Canceling a print job from the computerp.72Managing your printerp.72Finding advanced networking and administrator informationp.72Accessing the remote control panelp.72Configuring supply notifications from the Embedded Web Serverp.72Modifying confidential print settingsp.73Copying printer settings to other printersp.74Printing a menu settings pagep.74Printing a network setup pagep.75Checking the status of parts and suppliesp.75Checking the status of parts and supplies on the printer control panelp.75Checking the status of parts and supplies from the Embedded Web Serverp.75Saving energyp.75Using Eco-Modep.75Reducing printer noisep.76Adjusting Sleep modep.77Using Hibernate modep.77Restoring factory default settingsp.78Securing the printerp.78Using the security lock featurep.78Statement of Volatilityp.78Erasing volatile memoryp.79Erasing non-volatile memoryp.80Erasing printer hard disk memoryp.80Configuring printer hard disk encryptionp.81Finding printer security informationp.82Using MS810dep.83Learning about the printerp.83Printer configurationsp.83Using the printer control panelp.85Understanding the colors of the Sleep button and indicator lightsp.86Understanding the home screenp.86Using the touch-screen buttonsp.88Setting up and using the home screen applicationsp.89Finding the IP address of the computerp.89Finding the IP address of the printerp.89Accessing the Embedded Web Serverp.89Customizing the home screenp.90Activating the home screen applicationsp.90Finding information about the home screen applicationsp.90Using Background and Idle Screenp.90Setting up Forms and Favoritesp.91Understanding Eco-Settingsp.91Exporting and importing a configurationp.92Setting up Remote Operator Panelp.92Loading paper and specialty mediap.93Setting the paper size and typep.93Configuring Universal paper settingsp.93Loading the 250or 550-sheet trayp.93Loading the 2100-sheet trayp.100Loading the multipurpose feederp.107Linking and unlinking traysp.112Linking and unlinking traysp.112Creating a custom name for a paper typep.112Assigning a custom paper typep.113Printingp.113Printing a documentp.113Printing from a computerp.113Printing formsp.114Adjusting toner darknessp.114Printing from a flash drivep.115Printing from a flash drivep.115Supported flash drives and file typesp.116Printing from a mobile devicep.117Printing from a mobile device using Mopria Print Servicep.117Printing from a mobile device using Google Cloud Printp.117Printing from a mobile device using AirPrintp.117Printing from a mobile device using Lexmark Printp.117Printing confidential and other held jobsp.118Storing print jobs in the printerp.118Printing held jobsp.118Printing information pagesp.119Printing a font sample listp.119Printing a directory listp.119Canceling a print jobp.119Canceling a print job from the printer control panelp.119Canceling a print job from the computerp.119Managing your printerp.120Finding advanced networking and administrator informationp.120Checking the virtual displayp.120Configuring supply notifications from the Embedded Web Serverp.120Modifying confidential print settingsp.121Copying printer settings to other printersp.121Printing a menu settings pagep.122Printing a network setup pagep.122Checking the status of parts and suppliesp.122Checking the status of parts and supplies on the printer control panelp.122Checking the status of parts and supplies from the Embedded Web Serverp.122Saving energyp.123Using Eco-Modep.123Reducing printer noisep.123Adjusting Sleep modep.124Using Hibernate modep.124Restoring factory default settingsp.124Securing the printerp.125Using the security lock featurep.125Statement of Volatilityp.125Erasing volatile memoryp.126Erasing non-volatile memoryp.127Erasing printer hard disk memoryp.127Configuring printer hard disk encryptionp.128Finding printer security informationp.129Using MS812dep.130Learning about the printerp.130Printer configurationsp.130Using the printer control panelp.132Understanding the colors of the Sleep button and indicator lightsp.133Understanding the home screenp.133Using the touch-screen buttonsp.134Setting up and using the home screen applicationsp.137Finding the IP address of the computerp.137Finding the IP address of the printerp.137Accessing the Embedded Web Serverp.137Customizing the home screenp.138Activating the home screen applicationsp.138Finding information about the home screen applicationsp.138Using Background and Idle Screenp.138Setting up Forms and Favoritesp.139Understanding Eco-Settingsp.139Exporting and importing a configurationp.140Setting up Remote Operator Panelp.140Loading paper and specialty mediap.141Setting the paper size and typep.141Configuring Universal paper settingsp.141Loading the 250or 550-sheet trayp.142Loading the 2100-sheet trayp.149Loading the multipurpose feederp.156Linking and unlinking traysp.161Linking and unlinking traysp.161Creating a custom name for a paper typep.161Assigning a custom paper typep.162Printingp.162Printing a documentp.162Printing from a computerp.162Printing formsp.162Adjusting toner darknessp.163Printing from a flash drivep.163Printing from a flash drivep.163Supported flash drives and file typesp.164Printing from a mobile devicep.165Printing from a mobile device using Mopria Print Servicep.165Printing from a mobile device using Google Cloud Printp.165Printing from a mobile device using AirPrintp.165Printing from a mobile device using Lexmark Printp.166Printing confidential and other held jobsp.166Storing print jobs in the printerp.166Printing held jobsp.167Printing information pagesp.167Printing a font sample listp.167Printing a directory listp.167Canceling a print jobp.168Canceling a print job from the printer control panelp.168Canceling a print job from the computerp.168Managing your printerp.168Finding advanced networking and administrator informationp.168Checking the virtual displayp.168Configuring supply notifications from the Embedded Web Serverp.168Modifying confidential print settingsp.169Copying printer settings to other printersp.170Printing a menu settings pagep.170Printing a network setup pagep.170Checking the status of parts and suppliesp.171Checking the status of parts and supplies on the printer control panelp.171Checking the status of parts and supplies from the Embedded Web Serverp.171Saving energyp.171Using Eco-Modep.171Reducing printer noisep.172Adjusting Sleep modep.173Using Hibernate modep.173Restoring factory default settingsp.173Securing the printerp.174Using the security lock featurep.174Statement of Volatilityp.174Erasing volatile memoryp.175Erasing non-volatile memoryp.175Erasing printer hard disk memoryp.176Configuring printer hard disk encryptionp.176Finding printer security informationp.177Paper and specialty media guidep.178Using specialty mediap.178Tips on using card stockp.178Tips on using envelopesp.178Tips on using labelsp.179Tips on using transparenciesp.179Paper guidelinesp.180Paper characteristicsp.180Selecting paperp.181Selecting preprinted forms and letterheadp.181Using recycled paper and other office papersp.181Storing paperp.182Supported paper sizes, types, and weightsp.183Paper types and weights supported by the printerp.183Paper sizes supported by the printerp.183Paper sizes, types, and weights supported by the output optionsp.185Understanding the printer menusp.189Menus listp.189Paper menup.190Default Source menup.190Paper Size/Type menup.190Configure MP menup.193Substitute Size menup.193Paper Texture menup.194Paper Weight menup.195Paper Loading menup.197Custom Types menup.198Custom Names menup.198Custom Bin Names menup.199Universal Setup menup.199Bin Setup menup.200Reports menup.201Reports menup.201Network/Ports menup.202Active NIC menup.202Standard Network or Network [x] menup.202Reports menup.204Network Card menup.204TCP/IP menup.205IPv6 menup.206Wireless menup.206AppleTalk menup.207Standard USB menup.208Parallel [x] menup.209Serial [x] menup.212SMTP Setup menup.214Security menup.215Edit Security Setups menup.215Miscellaneous Security Settings menup.216Confidential Print menup.217Erase Temporary Data Files menup.217Security Audit Log menup.218Set Date and Time menup.218Settings menup.220General Settings menup.220Flash Drive Menup.229Print Settings menup.229Print Settingsp.231Setup menup.231Finishing menup.233Quality menup.236Job Accounting menup.236Utilities menup.238XPS menup.238PDF menup.239PostScript menup.239PCL Emul menup.239PPDS menup.242HTML menup.244Image menup.245Help menup.245Saving money and the environmentp.247Adjusting the brightness of the printer displayp.247Saving paper and tonerp.247Using recycled paperp.247Conserving suppliesp.248Recyclingp.248Recycling Lexmark productsp.248Recycling Lexmark packagingp.248Returning Lexmark cartridges for reuse or recyclingp.248Maintaining the printerp.250Ordering suppliesp.250Using genuine Lexmark parts and suppliesp.250Estimated number of remaining pagesp.250Ordering toner cartridgesp.250Ordering an imaging unitp.252Ordering staple cartridgesp.252Ordering a roller kitp.252Ordering a maintenance kitp.252Storing suppliesp.253Replacing suppliesp.254Replacing the toner cartridgep.254Replacing the imaging unitp.256Replacing a staple cartridgep.259Cleaning printer partsp.260Cleaning the printerp.260Emptying the hole punch boxp.261Moving the printerp.262Moving the printer to another locationp.262Shipping the printerp.262Clearing jamsp.263Avoiding jamsp.263Identifying jam locationsp.265Paper jam in the front doorp.267Paper jam in the rear doorp.268Paper jam in the standard binp.271Paper jam in the duplex unitp.271Paper jam in traysp.272Paper jam in the multipurpose feederp.273Paper jam in the staple finisherp.274Staple jam in the finisherp.276Paper jam in the output expanderp.279Paper jam in the mailboxp.280Troubleshootingp.282Understanding the printer messagesp.282Cartridge, imaging unit mismatch [41.xy]p.282Change [paper source] to [custom string] load [orientation]p.282Change [paper source] to [custom type name] load [orientation]p.282Change [paper source] to [paper size] load [orientation]p.282Change [paper source] to [paper type] [paper size] load [orientation]p.282Check tray [x] connectionp.283Close door or insert cartridgep.283Close finisher rear doorp.283Close rear doorp.283Complex page, some data may not have printed [39]p.283Configuration change, some held jobs were not restored [57]p.284Defective flash detected [51]p.284Disk full [62]p.284Disk must be formatted for use in this devicep.284Disk near full. Securely clearing disk space.p.284Empty the hole punch boxp.285Error reading USB drive. Remove USB.p.285Error reading USB hub. Remove hub.p.285Imaging unit low [84.xy]p.285Imaging unit nearly low [84.xy]p.285Imaging unit very low, [x] estimated pages remain [84.xy]p.285Incompatible output bin [x] [59]p.285Incompatible tray [x] [59]p.286Incorrect paper size, open [paper source] [34]p.286Insert hole punch boxp.286Insert staple cartridgep.286Insert Tray [x]p.286Install bin [x]p.287Install Tray [x]p.287Insufficient memory for Flash Memory Defragment operation [37]p.287Insufficient memory, some Held Jobs were deleted [37]p.287Insufficient memory, some held jobs will not be restored [37]p.288Insufficient memory to collate job [37]p.288Insufficient memory to support Resource Save feature [35]p.288Load [paper source] with [custom string] [paper orientation]p.288Load [paper source] with [custom type name] [paper orientation]p.288Load [paper source] with [paper size] [paper orientation]p.289Load [paper source] with [paper type] [paper size] [paper orientation]p.289Load multipurpose feeder with [custom string] [orientation]p.289Load multipurpose feeder with [custom type name] [orientation]p.289Load multipurpose feeder with [paper size] [orientation]p.290Load multipurpose feeder with [paper type] [paper size] [orientation]p.290Load staplesp.290Maintenance kit low [80.xy]p.290Maintenance kit nearly low [80.xy]p.290Maintenance kit very low [80.xy]p.291Memory full [38]p.291Misfeed cleared, extra sheets in output bin [24y.xx]p.291Network [x] software error [54]p.291Non-Lexmark [supply type], see User’s Guide [33.xy]p.291Not enough free space in flash memory for resources [52]p.292Paper changes neededp.292Parallel port [x] disabled [56]p.292Printer had to restart. Last job may be incomplete.p.292Reattach bin [x]p.293Reattach bins [x] – [y]p.293Reinstall missing or unresponsive cartridge [31.xy]p.294Reinstall missing or unresponsive imaging unit [31.xy]p.294Remove defective disk [61]p.294Remove packaging material, [area name]p.294Remove paper from all binsp.294Remove paper from bin [x]p.294Remove paper from [linked set bin name]p.295Remove paper from standard output binp.295Replace cartridge, printer region mismatch [42.xy]p.295Replace defective imaging unit [31.xy]p.295Replace imaging unit, 0 estimated pages remain [84.xy]p.296Replace maintenance kit, recommended life exceeded [80.xyz]p.296Replace maintenance kit to resume printing [80.xy]p.296Replace missing cartridge [31.xy]p.296Replace missing fuser [31.xyz]p.296Replace missing imaging unit [31.xy]p.296Replace roller kit [81.xx]p.296Replace unsupported cartridge [32.xy]p.296Replace unsupported imaging unit [32.xy]p.297Replace wiperp.297Restore held jobs?p.298Serial port [x] disabled [56]p.298Some held jobs were not restoredp.298Standard network software error [54]p.298Standard USB port disabled [56]p.298Supply needed to complete jobp.299The device is operating in Safe Mode. Some print options may be disabled or provide unexpected results.p.299Too many bins attached [58]p.299Too many disks installed [58]p.299Too many flash options installed [58]p.299Too many trays attached [58]p.299Tray [x] paper size unsupportedp.300Unformatted flash detected [53]p.300Unsupported diskp.300Unsupported option in slot [x] [55]p.300USB port [x] disabled [56]p.300Solving printer problemsp.301Printer does not respondp.301The printer is not respondingp.301Printer display is blankp.303Printing problemsp.303Confidential and other held documents do not printp.303Envelope seals when printingp.304Error message about reading the flash drive appearsp.305Incorrect characters printp.306Job prints from the wrong tray or on the wrong paperp.306Large jobs do not collatep.307Multiple-language PDF files do not printp.307Print job takes longer than expectedp.308Print jobs do not printp.309Printing slows downp.310Tray linking does not workp.310Unexpected page breaks occurp.311Hardware and internal option problemsp.3122100-sheet tray problemsp.312Cannot detect internal optionp.313Internal print server does not operate correctlyp.314Internal Solutions Port does not operate correctlyp.314Tray problemsp.315USB/parallel interface card does not operate correctlyp.316Paper feed problemsp.316Jammed pages are not reprintedp.316Paper frequently jamsp.317Paper jam message remains after jam is clearedp.317Print quality problemsp.318Characters have jagged or uneven edgesp.318Clipped pages or imagesp.318Compressed images appear on printsp.319Gray background on printsp.320Horizontal voids appear on printsp.321Incorrect margins on printsp.322Paper curlp.323Print irregularitiesp.323Print is too darkp.325Print is too lightp.326Printer is printing blank pagesp.327Printer is printing solid black pagesp.328Repeating defects appear on printsp.329Shadow images appear on printsp.330Skewed printp.330Streaked horizontal lines appear on printsp.331Streaked vertical lines appear on printsp.332Toner fog or background shading appears on printsp.334Toner rubs offp.334Toner specks appear on printsp.335Transparency print quality is poorp.335Uneven print densityp.335Vertical voids appear on printsp.336Solving home screen application problemsp.337An application error has occurredp.337Embedded Web Server does not openp.338Contacting customer supportp.339Noticesp.340Product informationp.340Edition noticep.340GOVERNMENT END USERSp.340Trademarksp.341Licensing noticesp.342Noise emission levelsp.342Waste from Electrical and Electronic Equipment (WEEE) directivep.342India E-Waste noticep.343Product disposalp.343Static sensitivity noticep.343ENERGY STARp.343Temperature informationp.343Laser noticep.344Laser advisory labelp.344Power consumptionp.344Product power consumptionp.344Sleep Modep.345Hibernate Modep.345Off modep.346Total energy usagep.346Patent acknowledgmentp.346Multiple model informationp.346STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.347Federal Communications Commission (FCC) compliance information statementp.349日本の VCCI 規定p.350European Community (EC) directives conformityp.350Model-specific informationp.350Federal Communications Commission (FCC) compliance information statementp.351Japanese VCCI noticep.351European Community (EC) directives conformityp.351Radio interference noticep.352Indexp.353
Page 355 of the Lexmark MS818 user manual — Table of contents
Page 355 · click to enlarge
Page 355

Table of contents

Contentsp.2Safety informationp.5Conventionsp.5Overviewp.8Using this guidep.8Finding information about the printerp.8Selecting a location for the printerp.10Additional printer setupp.12Installing internal optionsp.12Available internal optionsp.12Accessing the controller boardp.12Installing a memory cardp.16Installing an Internal Solutions Portp.17Installing an optional cardp.22Installing a printer hard diskp.23Removing a printer hard diskp.27Installing hardware optionsp.29Order of installationp.29Installing optional traysp.30Attaching cablesp.33Setting up the printer softwarep.35Installing the printer softwarep.35Adding available options in the print driverp.35Networkingp.36Preparing to set up the printer on an Ethernet networkp.36Preparing to set up the printer on a wireless networkp.36Connecting the printer to a network using the Wireless Setup Wizardp.37Connecting the printer to a wireless network using the Wi-Fi Protected Setupp.38Connecting the printer to a wireless network using the Embedded Web Serverp.39Setting up serial printing (Windows only)p.40Verifying printer setupp.40Using MS810n, MS810dn, MS811n, MS811dn, MS812dn, MS817n, MS817dn, MS818dnp.41Learning about the printerp.41Printer configurationsp.41Using the printer control panelp.43Understanding the colors of the Sleep button and indicator lightsp.44Loading paper and specialty mediap.44Setting the paper size and typep.44Configuring Universal paper settingsp.44Loading the 250or 550-sheet trayp.45Loading the 2100-sheet trayp.52Loading the multipurpose feederp.59Linking and unlinking traysp.64Linking and unlinking traysp.64Creating a custom name for a paper typep.64Assigning a custom paper typep.65Printingp.66Printing a documentp.66Printing from a computerp.66Adjusting toner darknessp.66Printing from a flash drivep.67Printing from a flash drivep.67Supported flash drives and file typesp.68Printing from a mobile devicep.69Printing from a mobile device using Mopria Print Servicep.69Printing from a mobile device using Google Cloud Printp.69Printing from a mobile device using AirPrintp.69Printing from a mobile device using Lexmark Mobile Printp.70Printing confidential and other held jobsp.70Storing print jobs in the printerp.70Printing held jobsp.71Printing information pagesp.71Printing a font sample listp.71Printing a directory listp.71Canceling a print jobp.71Canceling a print job from the printer control panelp.71Canceling a print job from the computerp.72Managing your printerp.72Finding advanced networking and administrator informationp.72Accessing the remote control panelp.72Configuring supply notifications from the Embedded Web Serverp.72Modifying confidential print settingsp.73Copying printer settings to other printersp.74Printing a menu settings pagep.74Printing a network setup pagep.75Checking the status of parts and suppliesp.75Checking the status of parts and supplies on the printer control panelp.75Checking the status of parts and supplies from the Embedded Web Serverp.75Saving energyp.75Using Eco-Modep.75Reducing printer noisep.76Adjusting Sleep modep.77Using Hibernate modep.77Restoring factory default settingsp.78Securing the printerp.78Using the security lock featurep.78Statement of Volatilityp.78Erasing volatile memoryp.79Erasing non-volatile memoryp.80Erasing printer hard disk memoryp.80Configuring printer hard disk encryptionp.81Finding printer security informationp.82Using MS810dep.83Learning about the printerp.83Printer configurationsp.83Using the printer control panelp.85Understanding the colors of the Sleep button and indicator lightsp.86Understanding the home screenp.86Using the touch-screen buttonsp.88Setting up and using the home screen applicationsp.89Finding the IP address of the computerp.89Finding the IP address of the printerp.89Accessing the Embedded Web Serverp.89Customizing the home screenp.90Activating the home screen applicationsp.90Finding information about the home screen applicationsp.90Using Background and Idle Screenp.90Setting up Forms and Favoritesp.91Understanding Eco-Settingsp.91Exporting and importing a configurationp.92Setting up Remote Operator Panelp.92Loading paper and specialty mediap.93Setting the paper size and typep.93Configuring Universal paper settingsp.93Loading the 250or 550-sheet trayp.93Loading the 2100-sheet trayp.100Loading the multipurpose feederp.107Linking and unlinking traysp.112Linking and unlinking traysp.112Creating a custom name for a paper typep.112Assigning a custom paper typep.113Printingp.113Printing a documentp.113Printing from a computerp.113Printing formsp.114Adjusting toner darknessp.114Printing from a flash drivep.115Printing from a flash drivep.115Supported flash drives and file typesp.116Printing from a mobile devicep.117Printing from a mobile device using Mopria Print Servicep.117Printing from a mobile device using Google Cloud Printp.117Printing from a mobile device using AirPrintp.117Printing from a mobile device using Lexmark Printp.117Printing confidential and other held jobsp.118Storing print jobs in the printerp.118Printing held jobsp.118Printing information pagesp.119Printing a font sample listp.119Printing a directory listp.119Canceling a print jobp.119Canceling a print job from the printer control panelp.119Canceling a print job from the computerp.119Managing your printerp.120Finding advanced networking and administrator informationp.120Checking the virtual displayp.120Configuring supply notifications from the Embedded Web Serverp.120Modifying confidential print settingsp.121Copying printer settings to other printersp.121Printing a menu settings pagep.122Printing a network setup pagep.122Checking the status of parts and suppliesp.122Checking the status of parts and supplies on the printer control panelp.122Checking the status of parts and supplies from the Embedded Web Serverp.122Saving energyp.123Using Eco-Modep.123Reducing printer noisep.123Adjusting Sleep modep.124Using Hibernate modep.124Restoring factory default settingsp.124Securing the printerp.125Using the security lock featurep.125Statement of Volatilityp.125Erasing volatile memoryp.126Erasing non-volatile memoryp.127Erasing printer hard disk memoryp.127Configuring printer hard disk encryptionp.128Finding printer security informationp.129Using MS812dep.130Learning about the printerp.130Printer configurationsp.130Using the printer control panelp.132Understanding the colors of the Sleep button and indicator lightsp.133Understanding the home screenp.133Using the touch-screen buttonsp.134Setting up and using the home screen applicationsp.137Finding the IP address of the computerp.137Finding the IP address of the printerp.137Accessing the Embedded Web Serverp.137Customizing the home screenp.138Activating the home screen applicationsp.138Finding information about the home screen applicationsp.138Using Background and Idle Screenp.138Setting up Forms and Favoritesp.139Understanding Eco-Settingsp.139Exporting and importing a configurationp.140Setting up Remote Operator Panelp.140Loading paper and specialty mediap.141Setting the paper size and typep.141Configuring Universal paper settingsp.141Loading the 250or 550-sheet trayp.142Loading the 2100-sheet trayp.149Loading the multipurpose feederp.156Linking and unlinking traysp.161Linking and unlinking traysp.161Creating a custom name for a paper typep.161Assigning a custom paper typep.162Printingp.162Printing a documentp.162Printing from a computerp.162Printing formsp.162Adjusting toner darknessp.163Printing from a flash drivep.163Printing from a flash drivep.163Supported flash drives and file typesp.164Printing from a mobile devicep.165Printing from a mobile device using Mopria Print Servicep.165Printing from a mobile device using Google Cloud Printp.165Printing from a mobile device using AirPrintp.165Printing from a mobile device using Lexmark Printp.166Printing confidential and other held jobsp.166Storing print jobs in the printerp.166Printing held jobsp.167Printing information pagesp.167Printing a font sample listp.167Printing a directory listp.167Canceling a print jobp.168Canceling a print job from the printer control panelp.168Canceling a print job from the computerp.168Managing your printerp.168Finding advanced networking and administrator informationp.168Checking the virtual displayp.168Configuring supply notifications from the Embedded Web Serverp.168Modifying confidential print settingsp.169Copying printer settings to other printersp.170Printing a menu settings pagep.170Printing a network setup pagep.170Checking the status of parts and suppliesp.171Checking the status of parts and supplies on the printer control panelp.171Checking the status of parts and supplies from the Embedded Web Serverp.171Saving energyp.171Using Eco-Modep.171Reducing printer noisep.172Adjusting Sleep modep.173Using Hibernate modep.173Restoring factory default settingsp.173Securing the printerp.174Using the security lock featurep.174Statement of Volatilityp.174Erasing volatile memoryp.175Erasing non-volatile memoryp.175Erasing printer hard disk memoryp.176Configuring printer hard disk encryptionp.176Finding printer security informationp.177Paper and specialty media guidep.178Using specialty mediap.178Tips on using card stockp.178Tips on using envelopesp.178Tips on using labelsp.179Tips on using transparenciesp.179Paper guidelinesp.180Paper characteristicsp.180Selecting paperp.181Selecting preprinted forms and letterheadp.181Using recycled paper and other office papersp.181Storing paperp.182Supported paper sizes, types, and weightsp.183Paper types and weights supported by the printerp.183Paper sizes supported by the printerp.183Paper sizes, types, and weights supported by the output optionsp.185Understanding the printer menusp.189Menus listp.189Paper menup.190Default Source menup.190Paper Size/Type menup.190Configure MP menup.193Substitute Size menup.193Paper Texture menup.194Paper Weight menup.195Paper Loading menup.197Custom Types menup.198Custom Names menup.198Custom Bin Names menup.199Universal Setup menup.199Bin Setup menup.200Reports menup.201Reports menup.201Network/Ports menup.202Active NIC menup.202Standard Network or Network [x] menup.202Reports menup.204Network Card menup.204TCP/IP menup.205IPv6 menup.206Wireless menup.206AppleTalk menup.207Standard USB menup.208Parallel [x] menup.209Serial [x] menup.212SMTP Setup menup.214Security menup.215Edit Security Setups menup.215Miscellaneous Security Settings menup.216Confidential Print menup.217Erase Temporary Data Files menup.217Security Audit Log menup.218Set Date and Time menup.218Settings menup.220General Settings menup.220Flash Drive Menup.229Print Settings menup.229Print Settingsp.231Setup menup.231Finishing menup.233Quality menup.236Job Accounting menup.236Utilities menup.238XPS menup.238PDF menup.239PostScript menup.239PCL Emul menup.239PPDS menup.242HTML menup.244Image menup.245Help menup.245Saving money and the environmentp.247Adjusting the brightness of the printer displayp.247Saving paper and tonerp.247Using recycled paperp.247Conserving suppliesp.248Recyclingp.248Recycling Lexmark productsp.248Recycling Lexmark packagingp.248Returning Lexmark cartridges for reuse or recyclingp.248Maintaining the printerp.250Ordering suppliesp.250Using genuine Lexmark parts and suppliesp.250Estimated number of remaining pagesp.250Ordering toner cartridgesp.250Ordering an imaging unitp.252Ordering staple cartridgesp.252Ordering a roller kitp.252Ordering a maintenance kitp.252Storing suppliesp.253Replacing suppliesp.254Replacing the toner cartridgep.254Replacing the imaging unitp.256Replacing a staple cartridgep.259Cleaning printer partsp.260Cleaning the printerp.260Emptying the hole punch boxp.261Moving the printerp.262Moving the printer to another locationp.262Shipping the printerp.262Clearing jamsp.263Avoiding jamsp.263Identifying jam locationsp.265Paper jam in the front doorp.267Paper jam in the rear doorp.268Paper jam in the standard binp.271Paper jam in the duplex unitp.271Paper jam in traysp.272Paper jam in the multipurpose feederp.273Paper jam in the staple finisherp.274Staple jam in the finisherp.276Paper jam in the output expanderp.279Paper jam in the mailboxp.280Troubleshootingp.282Understanding the printer messagesp.282Cartridge, imaging unit mismatch [41.xy]p.282Change [paper source] to [custom string] load [orientation]p.282Change [paper source] to [custom type name] load [orientation]p.282Change [paper source] to [paper size] load [orientation]p.282Change [paper source] to [paper type] [paper size] load [orientation]p.282Check tray [x] connectionp.283Close door or insert cartridgep.283Close finisher rear doorp.283Close rear doorp.283Complex page, some data may not have printed [39]p.283Configuration change, some held jobs were not restored [57]p.284Defective flash detected [51]p.284Disk full [62]p.284Disk must be formatted for use in this devicep.284Disk near full. Securely clearing disk space.p.284Empty the hole punch boxp.285Error reading USB drive. Remove USB.p.285Error reading USB hub. Remove hub.p.285Imaging unit low [84.xy]p.285Imaging unit nearly low [84.xy]p.285Imaging unit very low, [x] estimated pages remain [84.xy]p.285Incompatible output bin [x] [59]p.285Incompatible tray [x] [59]p.286Incorrect paper size, open [paper source] [34]p.286Insert hole punch boxp.286Insert staple cartridgep.286Insert Tray [x]p.286Install bin [x]p.287Install Tray [x]p.287Insufficient memory for Flash Memory Defragment operation [37]p.287Insufficient memory, some Held Jobs were deleted [37]p.287Insufficient memory, some held jobs will not be restored [37]p.288Insufficient memory to collate job [37]p.288Insufficient memory to support Resource Save feature [35]p.288Load [paper source] with [custom string] [paper orientation]p.288Load [paper source] with [custom type name] [paper orientation]p.288Load [paper source] with [paper size] [paper orientation]p.289Load [paper source] with [paper type] [paper size] [paper orientation]p.289Load multipurpose feeder with [custom string] [orientation]p.289Load multipurpose feeder with [custom type name] [orientation]p.289Load multipurpose feeder with [paper size] [orientation]p.290Load multipurpose feeder with [paper type] [paper size] [orientation]p.290Load staplesp.290Maintenance kit low [80.xy]p.290Maintenance kit nearly low [80.xy]p.290Maintenance kit very low [80.xy]p.291Memory full [38]p.291Misfeed cleared, extra sheets in output bin [24y.xx]p.291Network [x] software error [54]p.291Non-Lexmark [supply type], see User’s Guide [33.xy]p.291Not enough free space in flash memory for resources [52]p.292Paper changes neededp.292Parallel port [x] disabled [56]p.292Printer had to restart. Last job may be incomplete.p.292Reattach bin [x]p.293Reattach bins [x] – [y]p.293Reinstall missing or unresponsive cartridge [31.xy]p.294Reinstall missing or unresponsive imaging unit [31.xy]p.294Remove defective disk [61]p.294Remove packaging material, [area name]p.294Remove paper from all binsp.294Remove paper from bin [x]p.294Remove paper from [linked set bin name]p.295Remove paper from standard output binp.295Replace cartridge, printer region mismatch [42.xy]p.295Replace defective imaging unit [31.xy]p.295Replace imaging unit, 0 estimated pages remain [84.xy]p.296Replace maintenance kit, recommended life exceeded [80.xyz]p.296Replace maintenance kit to resume printing [80.xy]p.296Replace missing cartridge [31.xy]p.296Replace missing fuser [31.xyz]p.296Replace missing imaging unit [31.xy]p.296Replace roller kit [81.xx]p.296Replace unsupported cartridge [32.xy]p.296Replace unsupported imaging unit [32.xy]p.297Replace wiperp.297Restore held jobs?p.298Serial port [x] disabled [56]p.298Some held jobs were not restoredp.298Standard network software error [54]p.298Standard USB port disabled [56]p.298Supply needed to complete jobp.299The device is operating in Safe Mode. Some print options may be disabled or provide unexpected results.p.299Too many bins attached [58]p.299Too many disks installed [58]p.299Too many flash options installed [58]p.299Too many trays attached [58]p.299Tray [x] paper size unsupportedp.300Unformatted flash detected [53]p.300Unsupported diskp.300Unsupported option in slot [x] [55]p.300USB port [x] disabled [56]p.300Solving printer problemsp.301Printer does not respondp.301The printer is not respondingp.301Printer display is blankp.303Printing problemsp.303Confidential and other held documents do not printp.303Envelope seals when printingp.304Error message about reading the flash drive appearsp.305Incorrect characters printp.306Job prints from the wrong tray or on the wrong paperp.306Large jobs do not collatep.307Multiple-language PDF files do not printp.307Print job takes longer than expectedp.308Print jobs do not printp.309Printing slows downp.310Tray linking does not workp.310Unexpected page breaks occurp.311Hardware and internal option problemsp.3122100-sheet tray problemsp.312Cannot detect internal optionp.313Internal print server does not operate correctlyp.314Internal Solutions Port does not operate correctlyp.314Tray problemsp.315USB/parallel interface card does not operate correctlyp.316Paper feed problemsp.316Jammed pages are not reprintedp.316Paper frequently jamsp.317Paper jam message remains after jam is clearedp.317Print quality problemsp.318Characters have jagged or uneven edgesp.318Clipped pages or imagesp.318Compressed images appear on printsp.319Gray background on printsp.320Horizontal voids appear on printsp.321Incorrect margins on printsp.322Paper curlp.323Print irregularitiesp.323Print is too darkp.325Print is too lightp.326Printer is printing blank pagesp.327Printer is printing solid black pagesp.328Repeating defects appear on printsp.329Shadow images appear on printsp.330Skewed printp.330Streaked horizontal lines appear on printsp.331Streaked vertical lines appear on printsp.332Toner fog or background shading appears on printsp.334Toner rubs offp.334Toner specks appear on printsp.335Transparency print quality is poorp.335Uneven print densityp.335Vertical voids appear on printsp.336Solving home screen application problemsp.337An application error has occurredp.337Embedded Web Server does not openp.338Contacting customer supportp.339Noticesp.340Product informationp.340Edition noticep.340GOVERNMENT END USERSp.340Trademarksp.341Licensing noticesp.342Noise emission levelsp.342Waste from Electrical and Electronic Equipment (WEEE) directivep.342India E-Waste noticep.343Product disposalp.343Static sensitivity noticep.343ENERGY STARp.343Temperature informationp.343Laser noticep.344Laser advisory labelp.344Power consumptionp.344Product power consumptionp.344Sleep Modep.345Hibernate Modep.345Off modep.346Total energy usagep.346Patent acknowledgmentp.346Multiple model informationp.346STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.347Federal Communications Commission (FCC) compliance information statementp.349日本の VCCI 規定p.350European Community (EC) directives conformityp.350Model-specific informationp.350Federal Communications Commission (FCC) compliance information statementp.351Japanese VCCI noticep.351European Community (EC) directives conformityp.351Radio interference noticep.352Indexp.353
Page 356 of the Lexmark MS818 user manual — Table of contents
Page 356 · click to enlarge
Page 356

Table of contents

Contentsp.2Safety informationp.5Conventionsp.5Overviewp.8Using this guidep.8Finding information about the printerp.8Selecting a location for the printerp.10Additional printer setupp.12Installing internal optionsp.12Available internal optionsp.12Accessing the controller boardp.12Installing a memory cardp.16Installing an Internal Solutions Portp.17Installing an optional cardp.22Installing a printer hard diskp.23Removing a printer hard diskp.27Installing hardware optionsp.29Order of installationp.29Installing optional traysp.30Attaching cablesp.33Setting up the printer softwarep.35Installing the printer softwarep.35Adding available options in the print driverp.35Networkingp.36Preparing to set up the printer on an Ethernet networkp.36Preparing to set up the printer on a wireless networkp.36Connecting the printer to a network using the Wireless Setup Wizardp.37Connecting the printer to a wireless network using the Wi-Fi Protected Setupp.38Connecting the printer to a wireless network using the Embedded Web Serverp.39Setting up serial printing (Windows only)p.40Verifying printer setupp.40Using MS810n, MS810dn, MS811n, MS811dn, MS812dn, MS817n, MS817dn, MS818dnp.41Learning about the printerp.41Printer configurationsp.41Using the printer control panelp.43Understanding the colors of the Sleep button and indicator lightsp.44Loading paper and specialty mediap.44Setting the paper size and typep.44Configuring Universal paper settingsp.44Loading the 250or 550-sheet trayp.45Loading the 2100-sheet trayp.52Loading the multipurpose feederp.59Linking and unlinking traysp.64Linking and unlinking traysp.64Creating a custom name for a paper typep.64Assigning a custom paper typep.65Printingp.66Printing a documentp.66Printing from a computerp.66Adjusting toner darknessp.66Printing from a flash drivep.67Printing from a flash drivep.67Supported flash drives and file typesp.68Printing from a mobile devicep.69Printing from a mobile device using Mopria Print Servicep.69Printing from a mobile device using Google Cloud Printp.69Printing from a mobile device using AirPrintp.69Printing from a mobile device using Lexmark Mobile Printp.70Printing confidential and other held jobsp.70Storing print jobs in the printerp.70Printing held jobsp.71Printing information pagesp.71Printing a font sample listp.71Printing a directory listp.71Canceling a print jobp.71Canceling a print job from the printer control panelp.71Canceling a print job from the computerp.72Managing your printerp.72Finding advanced networking and administrator informationp.72Accessing the remote control panelp.72Configuring supply notifications from the Embedded Web Serverp.72Modifying confidential print settingsp.73Copying printer settings to other printersp.74Printing a menu settings pagep.74Printing a network setup pagep.75Checking the status of parts and suppliesp.75Checking the status of parts and supplies on the printer control panelp.75Checking the status of parts and supplies from the Embedded Web Serverp.75Saving energyp.75Using Eco-Modep.75Reducing printer noisep.76Adjusting Sleep modep.77Using Hibernate modep.77Restoring factory default settingsp.78Securing the printerp.78Using the security lock featurep.78Statement of Volatilityp.78Erasing volatile memoryp.79Erasing non-volatile memoryp.80Erasing printer hard disk memoryp.80Configuring printer hard disk encryptionp.81Finding printer security informationp.82Using MS810dep.83Learning about the printerp.83Printer configurationsp.83Using the printer control panelp.85Understanding the colors of the Sleep button and indicator lightsp.86Understanding the home screenp.86Using the touch-screen buttonsp.88Setting up and using the home screen applicationsp.89Finding the IP address of the computerp.89Finding the IP address of the printerp.89Accessing the Embedded Web Serverp.89Customizing the home screenp.90Activating the home screen applicationsp.90Finding information about the home screen applicationsp.90Using Background and Idle Screenp.90Setting up Forms and Favoritesp.91Understanding Eco-Settingsp.91Exporting and importing a configurationp.92Setting up Remote Operator Panelp.92Loading paper and specialty mediap.93Setting the paper size and typep.93Configuring Universal paper settingsp.93Loading the 250or 550-sheet trayp.93Loading the 2100-sheet trayp.100Loading the multipurpose feederp.107Linking and unlinking traysp.112Linking and unlinking traysp.112Creating a custom name for a paper typep.112Assigning a custom paper typep.113Printingp.113Printing a documentp.113Printing from a computerp.113Printing formsp.114Adjusting toner darknessp.114Printing from a flash drivep.115Printing from a flash drivep.115Supported flash drives and file typesp.116Printing from a mobile devicep.117Printing from a mobile device using Mopria Print Servicep.117Printing from a mobile device using Google Cloud Printp.117Printing from a mobile device using AirPrintp.117Printing from a mobile device using Lexmark Printp.117Printing confidential and other held jobsp.118Storing print jobs in the printerp.118Printing held jobsp.118Printing information pagesp.119Printing a font sample listp.119Printing a directory listp.119Canceling a print jobp.119Canceling a print job from the printer control panelp.119Canceling a print job from the computerp.119Managing your printerp.120Finding advanced networking and administrator informationp.120Checking the virtual displayp.120Configuring supply notifications from the Embedded Web Serverp.120Modifying confidential print settingsp.121Copying printer settings to other printersp.121Printing a menu settings pagep.122Printing a network setup pagep.122Checking the status of parts and suppliesp.122Checking the status of parts and supplies on the printer control panelp.122Checking the status of parts and supplies from the Embedded Web Serverp.122Saving energyp.123Using Eco-Modep.123Reducing printer noisep.123Adjusting Sleep modep.124Using Hibernate modep.124Restoring factory default settingsp.124Securing the printerp.125Using the security lock featurep.125Statement of Volatilityp.125Erasing volatile memoryp.126Erasing non-volatile memoryp.127Erasing printer hard disk memoryp.127Configuring printer hard disk encryptionp.128Finding printer security informationp.129Using MS812dep.130Learning about the printerp.130Printer configurationsp.130Using the printer control panelp.132Understanding the colors of the Sleep button and indicator lightsp.133Understanding the home screenp.133Using the touch-screen buttonsp.134Setting up and using the home screen applicationsp.137Finding the IP address of the computerp.137Finding the IP address of the printerp.137Accessing the Embedded Web Serverp.137Customizing the home screenp.138Activating the home screen applicationsp.138Finding information about the home screen applicationsp.138Using Background and Idle Screenp.138Setting up Forms and Favoritesp.139Understanding Eco-Settingsp.139Exporting and importing a configurationp.140Setting up Remote Operator Panelp.140Loading paper and specialty mediap.141Setting the paper size and typep.141Configuring Universal paper settingsp.141Loading the 250or 550-sheet trayp.142Loading the 2100-sheet trayp.149Loading the multipurpose feederp.156Linking and unlinking traysp.161Linking and unlinking traysp.161Creating a custom name for a paper typep.161Assigning a custom paper typep.162Printingp.162Printing a documentp.162Printing from a computerp.162Printing formsp.162Adjusting toner darknessp.163Printing from a flash drivep.163Printing from a flash drivep.163Supported flash drives and file typesp.164Printing from a mobile devicep.165Printing from a mobile device using Mopria Print Servicep.165Printing from a mobile device using Google Cloud Printp.165Printing from a mobile device using AirPrintp.165Printing from a mobile device using Lexmark Printp.166Printing confidential and other held jobsp.166Storing print jobs in the printerp.166Printing held jobsp.167Printing information pagesp.167Printing a font sample listp.167Printing a directory listp.167Canceling a print jobp.168Canceling a print job from the printer control panelp.168Canceling a print job from the computerp.168Managing your printerp.168Finding advanced networking and administrator informationp.168Checking the virtual displayp.168Configuring supply notifications from the Embedded Web Serverp.168Modifying confidential print settingsp.169Copying printer settings to other printersp.170Printing a menu settings pagep.170Printing a network setup pagep.170Checking the status of parts and suppliesp.171Checking the status of parts and supplies on the printer control panelp.171Checking the status of parts and supplies from the Embedded Web Serverp.171Saving energyp.171Using Eco-Modep.171Reducing printer noisep.172Adjusting Sleep modep.173Using Hibernate modep.173Restoring factory default settingsp.173Securing the printerp.174Using the security lock featurep.174Statement of Volatilityp.174Erasing volatile memoryp.175Erasing non-volatile memoryp.175Erasing printer hard disk memoryp.176Configuring printer hard disk encryptionp.176Finding printer security informationp.177Paper and specialty media guidep.178Using specialty mediap.178Tips on using card stockp.178Tips on using envelopesp.178Tips on using labelsp.179Tips on using transparenciesp.179Paper guidelinesp.180Paper characteristicsp.180Selecting paperp.181Selecting preprinted forms and letterheadp.181Using recycled paper and other office papersp.181Storing paperp.182Supported paper sizes, types, and weightsp.183Paper types and weights supported by the printerp.183Paper sizes supported by the printerp.183Paper sizes, types, and weights supported by the output optionsp.185Understanding the printer menusp.189Menus listp.189Paper menup.190Default Source menup.190Paper Size/Type menup.190Configure MP menup.193Substitute Size menup.193Paper Texture menup.194Paper Weight menup.195Paper Loading menup.197Custom Types menup.198Custom Names menup.198Custom Bin Names menup.199Universal Setup menup.199Bin Setup menup.200Reports menup.201Reports menup.201Network/Ports menup.202Active NIC menup.202Standard Network or Network [x] menup.202Reports menup.204Network Card menup.204TCP/IP menup.205IPv6 menup.206Wireless menup.206AppleTalk menup.207Standard USB menup.208Parallel [x] menup.209Serial [x] menup.212SMTP Setup menup.214Security menup.215Edit Security Setups menup.215Miscellaneous Security Settings menup.216Confidential Print menup.217Erase Temporary Data Files menup.217Security Audit Log menup.218Set Date and Time menup.218Settings menup.220General Settings menup.220Flash Drive Menup.229Print Settings menup.229Print Settingsp.231Setup menup.231Finishing menup.233Quality menup.236Job Accounting menup.236Utilities menup.238XPS menup.238PDF menup.239PostScript menup.239PCL Emul menup.239PPDS menup.242HTML menup.244Image menup.245Help menup.245Saving money and the environmentp.247Adjusting the brightness of the printer displayp.247Saving paper and tonerp.247Using recycled paperp.247Conserving suppliesp.248Recyclingp.248Recycling Lexmark productsp.248Recycling Lexmark packagingp.248Returning Lexmark cartridges for reuse or recyclingp.248Maintaining the printerp.250Ordering suppliesp.250Using genuine Lexmark parts and suppliesp.250Estimated number of remaining pagesp.250Ordering toner cartridgesp.250Ordering an imaging unitp.252Ordering staple cartridgesp.252Ordering a roller kitp.252Ordering a maintenance kitp.252Storing suppliesp.253Replacing suppliesp.254Replacing the toner cartridgep.254Replacing the imaging unitp.256Replacing a staple cartridgep.259Cleaning printer partsp.260Cleaning the printerp.260Emptying the hole punch boxp.261Moving the printerp.262Moving the printer to another locationp.262Shipping the printerp.262Clearing jamsp.263Avoiding jamsp.263Identifying jam locationsp.265Paper jam in the front doorp.267Paper jam in the rear doorp.268Paper jam in the standard binp.271Paper jam in the duplex unitp.271Paper jam in traysp.272Paper jam in the multipurpose feederp.273Paper jam in the staple finisherp.274Staple jam in the finisherp.276Paper jam in the output expanderp.279Paper jam in the mailboxp.280Troubleshootingp.282Understanding the printer messagesp.282Cartridge, imaging unit mismatch [41.xy]p.282Change [paper source] to [custom string] load [orientation]p.282Change [paper source] to [custom type name] load [orientation]p.282Change [paper source] to [paper size] load [orientation]p.282Change [paper source] to [paper type] [paper size] load [orientation]p.282Check tray [x] connectionp.283Close door or insert cartridgep.283Close finisher rear doorp.283Close rear doorp.283Complex page, some data may not have printed [39]p.283Configuration change, some held jobs were not restored [57]p.284Defective flash detected [51]p.284Disk full [62]p.284Disk must be formatted for use in this devicep.284Disk near full. Securely clearing disk space.p.284Empty the hole punch boxp.285Error reading USB drive. Remove USB.p.285Error reading USB hub. Remove hub.p.285Imaging unit low [84.xy]p.285Imaging unit nearly low [84.xy]p.285Imaging unit very low, [x] estimated pages remain [84.xy]p.285Incompatible output bin [x] [59]p.285Incompatible tray [x] [59]p.286Incorrect paper size, open [paper source] [34]p.286Insert hole punch boxp.286Insert staple cartridgep.286Insert Tray [x]p.286Install bin [x]p.287Install Tray [x]p.287Insufficient memory for Flash Memory Defragment operation [37]p.287Insufficient memory, some Held Jobs were deleted [37]p.287Insufficient memory, some held jobs will not be restored [37]p.288Insufficient memory to collate job [37]p.288Insufficient memory to support Resource Save feature [35]p.288Load [paper source] with [custom string] [paper orientation]p.288Load [paper source] with [custom type name] [paper orientation]p.288Load [paper source] with [paper size] [paper orientation]p.289Load [paper source] with [paper type] [paper size] [paper orientation]p.289Load multipurpose feeder with [custom string] [orientation]p.289Load multipurpose feeder with [custom type name] [orientation]p.289Load multipurpose feeder with [paper size] [orientation]p.290Load multipurpose feeder with [paper type] [paper size] [orientation]p.290Load staplesp.290Maintenance kit low [80.xy]p.290Maintenance kit nearly low [80.xy]p.290Maintenance kit very low [80.xy]p.291Memory full [38]p.291Misfeed cleared, extra sheets in output bin [24y.xx]p.291Network [x] software error [54]p.291Non-Lexmark [supply type], see User’s Guide [33.xy]p.291Not enough free space in flash memory for resources [52]p.292Paper changes neededp.292Parallel port [x] disabled [56]p.292Printer had to restart. Last job may be incomplete.p.292Reattach bin [x]p.293Reattach bins [x] – [y]p.293Reinstall missing or unresponsive cartridge [31.xy]p.294Reinstall missing or unresponsive imaging unit [31.xy]p.294Remove defective disk [61]p.294Remove packaging material, [area name]p.294Remove paper from all binsp.294Remove paper from bin [x]p.294Remove paper from [linked set bin name]p.295Remove paper from standard output binp.295Replace cartridge, printer region mismatch [42.xy]p.295Replace defective imaging unit [31.xy]p.295Replace imaging unit, 0 estimated pages remain [84.xy]p.296Replace maintenance kit, recommended life exceeded [80.xyz]p.296Replace maintenance kit to resume printing [80.xy]p.296Replace missing cartridge [31.xy]p.296Replace missing fuser [31.xyz]p.296Replace missing imaging unit [31.xy]p.296Replace roller kit [81.xx]p.296Replace unsupported cartridge [32.xy]p.296Replace unsupported imaging unit [32.xy]p.297Replace wiperp.297Restore held jobs?p.298Serial port [x] disabled [56]p.298Some held jobs were not restoredp.298Standard network software error [54]p.298Standard USB port disabled [56]p.298Supply needed to complete jobp.299The device is operating in Safe Mode. Some print options may be disabled or provide unexpected results.p.299Too many bins attached [58]p.299Too many disks installed [58]p.299Too many flash options installed [58]p.299Too many trays attached [58]p.299Tray [x] paper size unsupportedp.300Unformatted flash detected [53]p.300Unsupported diskp.300Unsupported option in slot [x] [55]p.300USB port [x] disabled [56]p.300Solving printer problemsp.301Printer does not respondp.301The printer is not respondingp.301Printer display is blankp.303Printing problemsp.303Confidential and other held documents do not printp.303Envelope seals when printingp.304Error message about reading the flash drive appearsp.305Incorrect characters printp.306Job prints from the wrong tray or on the wrong paperp.306Large jobs do not collatep.307Multiple-language PDF files do not printp.307Print job takes longer than expectedp.308Print jobs do not printp.309Printing slows downp.310Tray linking does not workp.310Unexpected page breaks occurp.311Hardware and internal option problemsp.3122100-sheet tray problemsp.312Cannot detect internal optionp.313Internal print server does not operate correctlyp.314Internal Solutions Port does not operate correctlyp.314Tray problemsp.315USB/parallel interface card does not operate correctlyp.316Paper feed problemsp.316Jammed pages are not reprintedp.316Paper frequently jamsp.317Paper jam message remains after jam is clearedp.317Print quality problemsp.318Characters have jagged or uneven edgesp.318Clipped pages or imagesp.318Compressed images appear on printsp.319Gray background on printsp.320Horizontal voids appear on printsp.321Incorrect margins on printsp.322Paper curlp.323Print irregularitiesp.323Print is too darkp.325Print is too lightp.326Printer is printing blank pagesp.327Printer is printing solid black pagesp.328Repeating defects appear on printsp.329Shadow images appear on printsp.330Skewed printp.330Streaked horizontal lines appear on printsp.331Streaked vertical lines appear on printsp.332Toner fog or background shading appears on printsp.334Toner rubs offp.334Toner specks appear on printsp.335Transparency print quality is poorp.335Uneven print densityp.335Vertical voids appear on printsp.336Solving home screen application problemsp.337An application error has occurredp.337Embedded Web Server does not openp.338Contacting customer supportp.339Noticesp.340Product informationp.340Edition noticep.340GOVERNMENT END USERSp.340Trademarksp.341Licensing noticesp.342Noise emission levelsp.342Waste from Electrical and Electronic Equipment (WEEE) directivep.342India E-Waste noticep.343Product disposalp.343Static sensitivity noticep.343ENERGY STARp.343Temperature informationp.343Laser noticep.344Laser advisory labelp.344Power consumptionp.344Product power consumptionp.344Sleep Modep.345Hibernate Modep.345Off modep.346Total energy usagep.346Patent acknowledgmentp.346Multiple model informationp.346STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.347Federal Communications Commission (FCC) compliance information statementp.349日本の VCCI 規定p.350European Community (EC) directives conformityp.350Model-specific informationp.350Federal Communications Commission (FCC) compliance information statementp.351Japanese VCCI noticep.351European Community (EC) directives conformityp.351Radio interference noticep.352Indexp.353
Page 357 of the Lexmark MS818 user manual — Table of contents
Page 357 · click to enlarge
Page 357

Table of contents

Contentsp.2Safety informationp.5Conventionsp.5Overviewp.8Using this guidep.8Finding information about the printerp.8Selecting a location for the printerp.10Additional printer setupp.12Installing internal optionsp.12Available internal optionsp.12Accessing the controller boardp.12Installing a memory cardp.16Installing an Internal Solutions Portp.17Installing an optional cardp.22Installing a printer hard diskp.23Removing a printer hard diskp.27Installing hardware optionsp.29Order of installationp.29Installing optional traysp.30Attaching cablesp.33Setting up the printer softwarep.35Installing the printer softwarep.35Adding available options in the print driverp.35Networkingp.36Preparing to set up the printer on an Ethernet networkp.36Preparing to set up the printer on a wireless networkp.36Connecting the printer to a network using the Wireless Setup Wizardp.37Connecting the printer to a wireless network using the Wi-Fi Protected Setupp.38Connecting the printer to a wireless network using the Embedded Web Serverp.39Setting up serial printing (Windows only)p.40Verifying printer setupp.40Using MS810n, MS810dn, MS811n, MS811dn, MS812dn, MS817n, MS817dn, MS818dnp.41Learning about the printerp.41Printer configurationsp.41Using the printer control panelp.43Understanding the colors of the Sleep button and indicator lightsp.44Loading paper and specialty mediap.44Setting the paper size and typep.44Configuring Universal paper settingsp.44Loading the 250or 550-sheet trayp.45Loading the 2100-sheet trayp.52Loading the multipurpose feederp.59Linking and unlinking traysp.64Linking and unlinking traysp.64Creating a custom name for a paper typep.64Assigning a custom paper typep.65Printingp.66Printing a documentp.66Printing from a computerp.66Adjusting toner darknessp.66Printing from a flash drivep.67Printing from a flash drivep.67Supported flash drives and file typesp.68Printing from a mobile devicep.69Printing from a mobile device using Mopria Print Servicep.69Printing from a mobile device using Google Cloud Printp.69Printing from a mobile device using AirPrintp.69Printing from a mobile device using Lexmark Mobile Printp.70Printing confidential and other held jobsp.70Storing print jobs in the printerp.70Printing held jobsp.71Printing information pagesp.71Printing a font sample listp.71Printing a directory listp.71Canceling a print jobp.71Canceling a print job from the printer control panelp.71Canceling a print job from the computerp.72Managing your printerp.72Finding advanced networking and administrator informationp.72Accessing the remote control panelp.72Configuring supply notifications from the Embedded Web Serverp.72Modifying confidential print settingsp.73Copying printer settings to other printersp.74Printing a menu settings pagep.74Printing a network setup pagep.75Checking the status of parts and suppliesp.75Checking the status of parts and supplies on the printer control panelp.75Checking the status of parts and supplies from the Embedded Web Serverp.75Saving energyp.75Using Eco-Modep.75Reducing printer noisep.76Adjusting Sleep modep.77Using Hibernate modep.77Restoring factory default settingsp.78Securing the printerp.78Using the security lock featurep.78Statement of Volatilityp.78Erasing volatile memoryp.79Erasing non-volatile memoryp.80Erasing printer hard disk memoryp.80Configuring printer hard disk encryptionp.81Finding printer security informationp.82Using MS810dep.83Learning about the printerp.83Printer configurationsp.83Using the printer control panelp.85Understanding the colors of the Sleep button and indicator lightsp.86Understanding the home screenp.86Using the touch-screen buttonsp.88Setting up and using the home screen applicationsp.89Finding the IP address of the computerp.89Finding the IP address of the printerp.89Accessing the Embedded Web Serverp.89Customizing the home screenp.90Activating the home screen applicationsp.90Finding information about the home screen applicationsp.90Using Background and Idle Screenp.90Setting up Forms and Favoritesp.91Understanding Eco-Settingsp.91Exporting and importing a configurationp.92Setting up Remote Operator Panelp.92Loading paper and specialty mediap.93Setting the paper size and typep.93Configuring Universal paper settingsp.93Loading the 250or 550-sheet trayp.93Loading the 2100-sheet trayp.100Loading the multipurpose feederp.107Linking and unlinking traysp.112Linking and unlinking traysp.112Creating a custom name for a paper typep.112Assigning a custom paper typep.113Printingp.113Printing a documentp.113Printing from a computerp.113Printing formsp.114Adjusting toner darknessp.114Printing from a flash drivep.115Printing from a flash drivep.115Supported flash drives and file typesp.116Printing from a mobile devicep.117Printing from a mobile device using Mopria Print Servicep.117Printing from a mobile device using Google Cloud Printp.117Printing from a mobile device using AirPrintp.117Printing from a mobile device using Lexmark Printp.117Printing confidential and other held jobsp.118Storing print jobs in the printerp.118Printing held jobsp.118Printing information pagesp.119Printing a font sample listp.119Printing a directory listp.119Canceling a print jobp.119Canceling a print job from the printer control panelp.119Canceling a print job from the computerp.119Managing your printerp.120Finding advanced networking and administrator informationp.120Checking the virtual displayp.120Configuring supply notifications from the Embedded Web Serverp.120Modifying confidential print settingsp.121Copying printer settings to other printersp.121Printing a menu settings pagep.122Printing a network setup pagep.122Checking the status of parts and suppliesp.122Checking the status of parts and supplies on the printer control panelp.122Checking the status of parts and supplies from the Embedded Web Serverp.122Saving energyp.123Using Eco-Modep.123Reducing printer noisep.123Adjusting Sleep modep.124Using Hibernate modep.124Restoring factory default settingsp.124Securing the printerp.125Using the security lock featurep.125Statement of Volatilityp.125Erasing volatile memoryp.126Erasing non-volatile memoryp.127Erasing printer hard disk memoryp.127Configuring printer hard disk encryptionp.128Finding printer security informationp.129Using MS812dep.130Learning about the printerp.130Printer configurationsp.130Using the printer control panelp.132Understanding the colors of the Sleep button and indicator lightsp.133Understanding the home screenp.133Using the touch-screen buttonsp.134Setting up and using the home screen applicationsp.137Finding the IP address of the computerp.137Finding the IP address of the printerp.137Accessing the Embedded Web Serverp.137Customizing the home screenp.138Activating the home screen applicationsp.138Finding information about the home screen applicationsp.138Using Background and Idle Screenp.138Setting up Forms and Favoritesp.139Understanding Eco-Settingsp.139Exporting and importing a configurationp.140Setting up Remote Operator Panelp.140Loading paper and specialty mediap.141Setting the paper size and typep.141Configuring Universal paper settingsp.141Loading the 250or 550-sheet trayp.142Loading the 2100-sheet trayp.149Loading the multipurpose feederp.156Linking and unlinking traysp.161Linking and unlinking traysp.161Creating a custom name for a paper typep.161Assigning a custom paper typep.162Printingp.162Printing a documentp.162Printing from a computerp.162Printing formsp.162Adjusting toner darknessp.163Printing from a flash drivep.163Printing from a flash drivep.163Supported flash drives and file typesp.164Printing from a mobile devicep.165Printing from a mobile device using Mopria Print Servicep.165Printing from a mobile device using Google Cloud Printp.165Printing from a mobile device using AirPrintp.165Printing from a mobile device using Lexmark Printp.166Printing confidential and other held jobsp.166Storing print jobs in the printerp.166Printing held jobsp.167Printing information pagesp.167Printing a font sample listp.167Printing a directory listp.167Canceling a print jobp.168Canceling a print job from the printer control panelp.168Canceling a print job from the computerp.168Managing your printerp.168Finding advanced networking and administrator informationp.168Checking the virtual displayp.168Configuring supply notifications from the Embedded Web Serverp.168Modifying confidential print settingsp.169Copying printer settings to other printersp.170Printing a menu settings pagep.170Printing a network setup pagep.170Checking the status of parts and suppliesp.171Checking the status of parts and supplies on the printer control panelp.171Checking the status of parts and supplies from the Embedded Web Serverp.171Saving energyp.171Using Eco-Modep.171Reducing printer noisep.172Adjusting Sleep modep.173Using Hibernate modep.173Restoring factory default settingsp.173Securing the printerp.174Using the security lock featurep.174Statement of Volatilityp.174Erasing volatile memoryp.175Erasing non-volatile memoryp.175Erasing printer hard disk memoryp.176Configuring printer hard disk encryptionp.176Finding printer security informationp.177Paper and specialty media guidep.178Using specialty mediap.178Tips on using card stockp.178Tips on using envelopesp.178Tips on using labelsp.179Tips on using transparenciesp.179Paper guidelinesp.180Paper characteristicsp.180Selecting paperp.181Selecting preprinted forms and letterheadp.181Using recycled paper and other office papersp.181Storing paperp.182Supported paper sizes, types, and weightsp.183Paper types and weights supported by the printerp.183Paper sizes supported by the printerp.183Paper sizes, types, and weights supported by the output optionsp.185Understanding the printer menusp.189Menus listp.189Paper menup.190Default Source menup.190Paper Size/Type menup.190Configure MP menup.193Substitute Size menup.193Paper Texture menup.194Paper Weight menup.195Paper Loading menup.197Custom Types menup.198Custom Names menup.198Custom Bin Names menup.199Universal Setup menup.199Bin Setup menup.200Reports menup.201Reports menup.201Network/Ports menup.202Active NIC menup.202Standard Network or Network [x] menup.202Reports menup.204Network Card menup.204TCP/IP menup.205IPv6 menup.206Wireless menup.206AppleTalk menup.207Standard USB menup.208Parallel [x] menup.209Serial [x] menup.212SMTP Setup menup.214Security menup.215Edit Security Setups menup.215Miscellaneous Security Settings menup.216Confidential Print menup.217Erase Temporary Data Files menup.217Security Audit Log menup.218Set Date and Time menup.218Settings menup.220General Settings menup.220Flash Drive Menup.229Print Settings menup.229Print Settingsp.231Setup menup.231Finishing menup.233Quality menup.236Job Accounting menup.236Utilities menup.238XPS menup.238PDF menup.239PostScript menup.239PCL Emul menup.239PPDS menup.242HTML menup.244Image menup.245Help menup.245Saving money and the environmentp.247Adjusting the brightness of the printer displayp.247Saving paper and tonerp.247Using recycled paperp.247Conserving suppliesp.248Recyclingp.248Recycling Lexmark productsp.248Recycling Lexmark packagingp.248Returning Lexmark cartridges for reuse or recyclingp.248Maintaining the printerp.250Ordering suppliesp.250Using genuine Lexmark parts and suppliesp.250Estimated number of remaining pagesp.250Ordering toner cartridgesp.250Ordering an imaging unitp.252Ordering staple cartridgesp.252Ordering a roller kitp.252Ordering a maintenance kitp.252Storing suppliesp.253Replacing suppliesp.254Replacing the toner cartridgep.254Replacing the imaging unitp.256Replacing a staple cartridgep.259Cleaning printer partsp.260Cleaning the printerp.260Emptying the hole punch boxp.261Moving the printerp.262Moving the printer to another locationp.262Shipping the printerp.262Clearing jamsp.263Avoiding jamsp.263Identifying jam locationsp.265Paper jam in the front doorp.267Paper jam in the rear doorp.268Paper jam in the standard binp.271Paper jam in the duplex unitp.271Paper jam in traysp.272Paper jam in the multipurpose feederp.273Paper jam in the staple finisherp.274Staple jam in the finisherp.276Paper jam in the output expanderp.279Paper jam in the mailboxp.280Troubleshootingp.282Understanding the printer messagesp.282Cartridge, imaging unit mismatch [41.xy]p.282Change [paper source] to [custom string] load [orientation]p.282Change [paper source] to [custom type name] load [orientation]p.282Change [paper source] to [paper size] load [orientation]p.282Change [paper source] to [paper type] [paper size] load [orientation]p.282Check tray [x] connectionp.283Close door or insert cartridgep.283Close finisher rear doorp.283Close rear doorp.283Complex page, some data may not have printed [39]p.283Configuration change, some held jobs were not restored [57]p.284Defective flash detected [51]p.284Disk full [62]p.284Disk must be formatted for use in this devicep.284Disk near full. Securely clearing disk space.p.284Empty the hole punch boxp.285Error reading USB drive. Remove USB.p.285Error reading USB hub. Remove hub.p.285Imaging unit low [84.xy]p.285Imaging unit nearly low [84.xy]p.285Imaging unit very low, [x] estimated pages remain [84.xy]p.285Incompatible output bin [x] [59]p.285Incompatible tray [x] [59]p.286Incorrect paper size, open [paper source] [34]p.286Insert hole punch boxp.286Insert staple cartridgep.286Insert Tray [x]p.286Install bin [x]p.287Install Tray [x]p.287Insufficient memory for Flash Memory Defragment operation [37]p.287Insufficient memory, some Held Jobs were deleted [37]p.287Insufficient memory, some held jobs will not be restored [37]p.288Insufficient memory to collate job [37]p.288Insufficient memory to support Resource Save feature [35]p.288Load [paper source] with [custom string] [paper orientation]p.288Load [paper source] with [custom type name] [paper orientation]p.288Load [paper source] with [paper size] [paper orientation]p.289Load [paper source] with [paper type] [paper size] [paper orientation]p.289Load multipurpose feeder with [custom string] [orientation]p.289Load multipurpose feeder with [custom type name] [orientation]p.289Load multipurpose feeder with [paper size] [orientation]p.290Load multipurpose feeder with [paper type] [paper size] [orientation]p.290Load staplesp.290Maintenance kit low [80.xy]p.290Maintenance kit nearly low [80.xy]p.290Maintenance kit very low [80.xy]p.291Memory full [38]p.291Misfeed cleared, extra sheets in output bin [24y.xx]p.291Network [x] software error [54]p.291Non-Lexmark [supply type], see User’s Guide [33.xy]p.291Not enough free space in flash memory for resources [52]p.292Paper changes neededp.292Parallel port [x] disabled [56]p.292Printer had to restart. Last job may be incomplete.p.292Reattach bin [x]p.293Reattach bins [x] – [y]p.293Reinstall missing or unresponsive cartridge [31.xy]p.294Reinstall missing or unresponsive imaging unit [31.xy]p.294Remove defective disk [61]p.294Remove packaging material, [area name]p.294Remove paper from all binsp.294Remove paper from bin [x]p.294Remove paper from [linked set bin name]p.295Remove paper from standard output binp.295Replace cartridge, printer region mismatch [42.xy]p.295Replace defective imaging unit [31.xy]p.295Replace imaging unit, 0 estimated pages remain [84.xy]p.296Replace maintenance kit, recommended life exceeded [80.xyz]p.296Replace maintenance kit to resume printing [80.xy]p.296Replace missing cartridge [31.xy]p.296Replace missing fuser [31.xyz]p.296Replace missing imaging unit [31.xy]p.296Replace roller kit [81.xx]p.296Replace unsupported cartridge [32.xy]p.296Replace unsupported imaging unit [32.xy]p.297Replace wiperp.297Restore held jobs?p.298Serial port [x] disabled [56]p.298Some held jobs were not restoredp.298Standard network software error [54]p.298Standard USB port disabled [56]p.298Supply needed to complete jobp.299The device is operating in Safe Mode. Some print options may be disabled or provide unexpected results.p.299Too many bins attached [58]p.299Too many disks installed [58]p.299Too many flash options installed [58]p.299Too many trays attached [58]p.299Tray [x] paper size unsupportedp.300Unformatted flash detected [53]p.300Unsupported diskp.300Unsupported option in slot [x] [55]p.300USB port [x] disabled [56]p.300Solving printer problemsp.301Printer does not respondp.301The printer is not respondingp.301Printer display is blankp.303Printing problemsp.303Confidential and other held documents do not printp.303Envelope seals when printingp.304Error message about reading the flash drive appearsp.305Incorrect characters printp.306Job prints from the wrong tray or on the wrong paperp.306Large jobs do not collatep.307Multiple-language PDF files do not printp.307Print job takes longer than expectedp.308Print jobs do not printp.309Printing slows downp.310Tray linking does not workp.310Unexpected page breaks occurp.311Hardware and internal option problemsp.3122100-sheet tray problemsp.312Cannot detect internal optionp.313Internal print server does not operate correctlyp.314Internal Solutions Port does not operate correctlyp.314Tray problemsp.315USB/parallel interface card does not operate correctlyp.316Paper feed problemsp.316Jammed pages are not reprintedp.316Paper frequently jamsp.317Paper jam message remains after jam is clearedp.317Print quality problemsp.318Characters have jagged or uneven edgesp.318Clipped pages or imagesp.318Compressed images appear on printsp.319Gray background on printsp.320Horizontal voids appear on printsp.321Incorrect margins on printsp.322Paper curlp.323Print irregularitiesp.323Print is too darkp.325Print is too lightp.326Printer is printing blank pagesp.327Printer is printing solid black pagesp.328Repeating defects appear on printsp.329Shadow images appear on printsp.330Skewed printp.330Streaked horizontal lines appear on printsp.331Streaked vertical lines appear on printsp.332Toner fog or background shading appears on printsp.334Toner rubs offp.334Toner specks appear on printsp.335Transparency print quality is poorp.335Uneven print densityp.335Vertical voids appear on printsp.336Solving home screen application problemsp.337An application error has occurredp.337Embedded Web Server does not openp.338Contacting customer supportp.339Noticesp.340Product informationp.340Edition noticep.340GOVERNMENT END USERSp.340Trademarksp.341Licensing noticesp.342Noise emission levelsp.342Waste from Electrical and Electronic Equipment (WEEE) directivep.342India E-Waste noticep.343Product disposalp.343Static sensitivity noticep.343ENERGY STARp.343Temperature informationp.343Laser noticep.344Laser advisory labelp.344Power consumptionp.344Product power consumptionp.344Sleep Modep.345Hibernate Modep.345Off modep.346Total energy usagep.346Patent acknowledgmentp.346Multiple model informationp.346STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.347Federal Communications Commission (FCC) compliance information statementp.349日本の VCCI 規定p.350European Community (EC) directives conformityp.350Model-specific informationp.350Federal Communications Commission (FCC) compliance information statementp.351Japanese VCCI noticep.351European Community (EC) directives conformityp.351Radio interference noticep.352Indexp.353
Page 358 of the Lexmark MS818 user manual — Index
Page 358 · click to enlarge
Page 358

Change [paper source] to

Insufficient memory, some held

configurations 41, 83, 130 finishing features 185 minimum clearances 10, 11 models 41, 83, 130 moving 10, 11, 262 selecting a location 10, 11 shipping 262 printer control panel

[paper type] [paper size] load [orientation] 282 Check tray [x] connection 283 Close door or insert

jobs will not be restored [37] 288 Load [paper source] with

[custom string] [paper orientation] 288 Load [paper source] with

cartridge 283 Close finisher rear door 283 Close rear door 283 Complex page, some data may

[custom type name] [paper orientation] 288 Load [paper source] with [paper

adjusting brightness 247 factory defaults,

not have printed [39] 283 Configuration change, some

size] [paper orientation] 289 Load [paper source] with [paper

restoring 78, 124, 173 indicator light 44, 86, 133 parts 43, 85, 132 Sleep button light 44, 86, 133 using 43, 85, 132 printer control panel, virtual display

held jobs were not restored [57] 284 Defective flash detected

type] [paper size] [paper orientation] 289 Load multipurpose feeder with

[51] 284 Disk full [62] 284 Disk must be formatted for use

[custom type name] [orientation] 289 Load multipurpose feeder with

in this device 284 Disk near full. Securely clearing

using the Embedded Web

[paper size] [orientation] 290 Load multipurpose feeder with

Server 120 Printer had to restart. Last job may be incomplete. 292 printer hard disk

disk space. 284 Empty the hole punch box 285 Error reading USB drive.

[paper type] [paper size] [orientation] 290 Load multipurpose feeder with

Remove USB. 285 Error reading USB hub. Remove

disposing of 78, 125, 174 encrypting 81, 128, 176 installing 23 removing 27 wiping 80, 127, 176 printer hard disk encryption 81, 128, 176 printer hard disk memory

custom string] [orientation] 289 Load staples 290 Maintenance kit low

hub. 285 Imaging unit low [84.xy] 285 Imaging unit nearly low

[84.xy] 285 Imaging unit very low, [x]

[80.xy] 290 Maintenance kit nearly low

estimated pages remain [84.xy] 285 Incompatible output bin [x]

[80.xy] 290 Maintenance kit very low

erasing 80, 127, 176 printer information

[80.xy] 291 Memory full [38] 291 Misfeed cleared, extra sheets in

[59] 285 Incompatible tray [x] [59] 286 Incorrect paper size, open

where to find 8 printer IP address

output bin [24y.xx] 291 Network [x] software error

finding 89, 137 printer is printing blank pages 327 printer messages

[paper source] [34] 286 Insert hole punch box 286 Insert staple cartridge 286 Insert Tray [x] 286 Install bin [x] 287 Install Tray [x] 287 Insufficient memory for Flash

[54] 291 Non‑Lexmark [supply type], see

User’s Guide [33.xy] 291 Not enough free space in flash

memory for resources [52] 292 Paper changes needed 292 Parallel port [x] disabled

mismatch [41.xy] 282 Change [paper source] to

[custom string] load [orientation] 282 Change [paper source] to

Memory Defragment operation [37] 287 Insufficient memory to collate

[56] 292 Printer had to restart. Last job

[custom type name] load [orientation] 282 Change [paper source] to

job [37] 288 Insufficient memory to support

may be incomplete. 292 Reattach bin [x] 293 Reattach bins [x] – [y] 293 Reinstall missing or

Resource Save feature [35] 288 Insufficient memory, some Held

[paper size] load [orientation] 282

Jobs were deleted [37] 287

unresponsive cartridge [31.xy] 294

Index 358 · printer · Cartridge, imaging unit

Page 359 of the Lexmark MS818 user manual — Table of contents
Page 359 · click to enlarge
Page 359

Table of contents

Contentsp.2Safety informationp.5Conventionsp.5Overviewp.8Using this guidep.8Finding information about the printerp.8Selecting a location for the printerp.10Additional printer setupp.12Installing internal optionsp.12Available internal optionsp.12Accessing the controller boardp.12Installing a memory cardp.16Installing an Internal Solutions Portp.17Installing an optional cardp.22Installing a printer hard diskp.23Removing a printer hard diskp.27Installing hardware optionsp.29Order of installationp.29Installing optional traysp.30Attaching cablesp.33Setting up the printer softwarep.35Installing the printer softwarep.35Adding available options in the print driverp.35Networkingp.36Preparing to set up the printer on an Ethernet networkp.36Preparing to set up the printer on a wireless networkp.36Connecting the printer to a network using the Wireless Setup Wizardp.37Connecting the printer to a wireless network using the Wi-Fi Protected Setupp.38Connecting the printer to a wireless network using the Embedded Web Serverp.39Setting up serial printing (Windows only)p.40Verifying printer setupp.40Using MS810n, MS810dn, MS811n, MS811dn, MS812dn, MS817n, MS817dn, MS818dnp.41Learning about the printerp.41Printer configurationsp.41Using the printer control panelp.43Understanding the colors of the Sleep button and indicator lightsp.44Loading paper and specialty mediap.44Setting the paper size and typep.44Configuring Universal paper settingsp.44Loading the 250or 550-sheet trayp.45Loading the 2100-sheet trayp.52Loading the multipurpose feederp.59Linking and unlinking traysp.64Linking and unlinking traysp.64Creating a custom name for a paper typep.64Assigning a custom paper typep.65Printingp.66Printing a documentp.66Printing from a computerp.66Adjusting toner darknessp.66Printing from a flash drivep.67Printing from a flash drivep.67Supported flash drives and file typesp.68Printing from a mobile devicep.69Printing from a mobile device using Mopria Print Servicep.69Printing from a mobile device using Google Cloud Printp.69Printing from a mobile device using AirPrintp.69Printing from a mobile device using Lexmark Mobile Printp.70Printing confidential and other held jobsp.70Storing print jobs in the printerp.70Printing held jobsp.71Printing information pagesp.71Printing a font sample listp.71Printing a directory listp.71Canceling a print jobp.71Canceling a print job from the printer control panelp.71Canceling a print job from the computerp.72Managing your printerp.72Finding advanced networking and administrator informationp.72Accessing the remote control panelp.72Configuring supply notifications from the Embedded Web Serverp.72Modifying confidential print settingsp.73Copying printer settings to other printersp.74Printing a menu settings pagep.74Printing a network setup pagep.75Checking the status of parts and suppliesp.75Checking the status of parts and supplies on the printer control panelp.75Checking the status of parts and supplies from the Embedded Web Serverp.75Saving energyp.75Using Eco-Modep.75Reducing printer noisep.76Adjusting Sleep modep.77Using Hibernate modep.77Restoring factory default settingsp.78Securing the printerp.78Using the security lock featurep.78Statement of Volatilityp.78Erasing volatile memoryp.79Erasing non-volatile memoryp.80Erasing printer hard disk memoryp.80Configuring printer hard disk encryptionp.81Finding printer security informationp.82Using MS810dep.83Learning about the printerp.83Printer configurationsp.83Using the printer control panelp.85Understanding the colors of the Sleep button and indicator lightsp.86Understanding the home screenp.86Using the touch-screen buttonsp.88Setting up and using the home screen applicationsp.89Finding the IP address of the computerp.89Finding the IP address of the printerp.89Accessing the Embedded Web Serverp.89Customizing the home screenp.90Activating the home screen applicationsp.90Finding information about the home screen applicationsp.90Using Background and Idle Screenp.90Setting up Forms and Favoritesp.91Understanding Eco-Settingsp.91Exporting and importing a configurationp.92Setting up Remote Operator Panelp.92Loading paper and specialty mediap.93Setting the paper size and typep.93Configuring Universal paper settingsp.93Loading the 250or 550-sheet trayp.93Loading the 2100-sheet trayp.100Loading the multipurpose feederp.107Linking and unlinking traysp.112Linking and unlinking traysp.112Creating a custom name for a paper typep.112Assigning a custom paper typep.113Printingp.113Printing a documentp.113Printing from a computerp.113Printing formsp.114Adjusting toner darknessp.114Printing from a flash drivep.115Printing from a flash drivep.115Supported flash drives and file typesp.116Printing from a mobile devicep.117Printing from a mobile device using Mopria Print Servicep.117Printing from a mobile device using Google Cloud Printp.117Printing from a mobile device using AirPrintp.117Printing from a mobile device using Lexmark Printp.117Printing confidential and other held jobsp.118Storing print jobs in the printerp.118Printing held jobsp.118Printing information pagesp.119Printing a font sample listp.119Printing a directory listp.119Canceling a print jobp.119Canceling a print job from the printer control panelp.119Canceling a print job from the computerp.119Managing your printerp.120Finding advanced networking and administrator informationp.120Checking the virtual displayp.120Configuring supply notifications from the Embedded Web Serverp.120Modifying confidential print settingsp.121Copying printer settings to other printersp.121Printing a menu settings pagep.122Printing a network setup pagep.122Checking the status of parts and suppliesp.122Checking the status of parts and supplies on the printer control panelp.122Checking the status of parts and supplies from the Embedded Web Serverp.122Saving energyp.123Using Eco-Modep.123Reducing printer noisep.123Adjusting Sleep modep.124Using Hibernate modep.124Restoring factory default settingsp.124Securing the printerp.125Using the security lock featurep.125Statement of Volatilityp.125Erasing volatile memoryp.126Erasing non-volatile memoryp.127Erasing printer hard disk memoryp.127Configuring printer hard disk encryptionp.128Finding printer security informationp.129Using MS812dep.130Learning about the printerp.130Printer configurationsp.130Using the printer control panelp.132Understanding the colors of the Sleep button and indicator lightsp.133Understanding the home screenp.133Using the touch-screen buttonsp.134Setting up and using the home screen applicationsp.137Finding the IP address of the computerp.137Finding the IP address of the printerp.137Accessing the Embedded Web Serverp.137Customizing the home screenp.138Activating the home screen applicationsp.138Finding information about the home screen applicationsp.138Using Background and Idle Screenp.138Setting up Forms and Favoritesp.139Understanding Eco-Settingsp.139Exporting and importing a configurationp.140Setting up Remote Operator Panelp.140Loading paper and specialty mediap.141Setting the paper size and typep.141Configuring Universal paper settingsp.141Loading the 250or 550-sheet trayp.142Loading the 2100-sheet trayp.149Loading the multipurpose feederp.156Linking and unlinking traysp.161Linking and unlinking traysp.161Creating a custom name for a paper typep.161Assigning a custom paper typep.162Printingp.162Printing a documentp.162Printing from a computerp.162Printing formsp.162Adjusting toner darknessp.163Printing from a flash drivep.163Printing from a flash drivep.163Supported flash drives and file typesp.164Printing from a mobile devicep.165Printing from a mobile device using Mopria Print Servicep.165Printing from a mobile device using Google Cloud Printp.165Printing from a mobile device using AirPrintp.165Printing from a mobile device using Lexmark Printp.166Printing confidential and other held jobsp.166Storing print jobs in the printerp.166Printing held jobsp.167Printing information pagesp.167Printing a font sample listp.167Printing a directory listp.167Canceling a print jobp.168Canceling a print job from the printer control panelp.168Canceling a print job from the computerp.168Managing your printerp.168Finding advanced networking and administrator informationp.168Checking the virtual displayp.168Configuring supply notifications from the Embedded Web Serverp.168Modifying confidential print settingsp.169Copying printer settings to other printersp.170Printing a menu settings pagep.170Printing a network setup pagep.170Checking the status of parts and suppliesp.171Checking the status of parts and supplies on the printer control panelp.171Checking the status of parts and supplies from the Embedded Web Serverp.171Saving energyp.171Using Eco-Modep.171Reducing printer noisep.172Adjusting Sleep modep.173Using Hibernate modep.173Restoring factory default settingsp.173Securing the printerp.174Using the security lock featurep.174Statement of Volatilityp.174Erasing volatile memoryp.175Erasing non-volatile memoryp.175Erasing printer hard disk memoryp.176Configuring printer hard disk encryptionp.176Finding printer security informationp.177Paper and specialty media guidep.178Using specialty mediap.178Tips on using card stockp.178Tips on using envelopesp.178Tips on using labelsp.179Tips on using transparenciesp.179Paper guidelinesp.180Paper characteristicsp.180Selecting paperp.181Selecting preprinted forms and letterheadp.181Using recycled paper and other office papersp.181Storing paperp.182Supported paper sizes, types, and weightsp.183Paper types and weights supported by the printerp.183Paper sizes supported by the printerp.183Paper sizes, types, and weights supported by the output optionsp.185Understanding the printer menusp.189Menus listp.189Paper menup.190Default Source menup.190Paper Size/Type menup.190Configure MP menup.193Substitute Size menup.193Paper Texture menup.194Paper Weight menup.195Paper Loading menup.197Custom Types menup.198Custom Names menup.198Custom Bin Names menup.199Universal Setup menup.199Bin Setup menup.200Reports menup.201Reports menup.201Network/Ports menup.202Active NIC menup.202Standard Network or Network [x] menup.202Reports menup.204Network Card menup.204TCP/IP menup.205IPv6 menup.206Wireless menup.206AppleTalk menup.207Standard USB menup.208Parallel [x] menup.209Serial [x] menup.212SMTP Setup menup.214Security menup.215Edit Security Setups menup.215Miscellaneous Security Settings menup.216Confidential Print menup.217Erase Temporary Data Files menup.217Security Audit Log menup.218Set Date and Time menup.218Settings menup.220General Settings menup.220Flash Drive Menup.229Print Settings menup.229Print Settingsp.231Setup menup.231Finishing menup.233Quality menup.236Job Accounting menup.236Utilities menup.238XPS menup.238PDF menup.239PostScript menup.239PCL Emul menup.239PPDS menup.242HTML menup.244Image menup.245Help menup.245Saving money and the environmentp.247Adjusting the brightness of the printer displayp.247Saving paper and tonerp.247Using recycled paperp.247Conserving suppliesp.248Recyclingp.248Recycling Lexmark productsp.248Recycling Lexmark packagingp.248Returning Lexmark cartridges for reuse or recyclingp.248Maintaining the printerp.250Ordering suppliesp.250Using genuine Lexmark parts and suppliesp.250Estimated number of remaining pagesp.250Ordering toner cartridgesp.250Ordering an imaging unitp.252Ordering staple cartridgesp.252Ordering a roller kitp.252Ordering a maintenance kitp.252Storing suppliesp.253Replacing suppliesp.254Replacing the toner cartridgep.254Replacing the imaging unitp.256Replacing a staple cartridgep.259Cleaning printer partsp.260Cleaning the printerp.260Emptying the hole punch boxp.261Moving the printerp.262Moving the printer to another locationp.262Shipping the printerp.262Clearing jamsp.263Avoiding jamsp.263Identifying jam locationsp.265Paper jam in the front doorp.267Paper jam in the rear doorp.268Paper jam in the standard binp.271Paper jam in the duplex unitp.271Paper jam in traysp.272Paper jam in the multipurpose feederp.273Paper jam in the staple finisherp.274Staple jam in the finisherp.276Paper jam in the output expanderp.279Paper jam in the mailboxp.280Troubleshootingp.282Understanding the printer messagesp.282Cartridge, imaging unit mismatch [41.xy]p.282Change [paper source] to [custom string] load [orientation]p.282Change [paper source] to [custom type name] load [orientation]p.282Change [paper source] to [paper size] load [orientation]p.282Change [paper source] to [paper type] [paper size] load [orientation]p.282Check tray [x] connectionp.283Close door or insert cartridgep.283Close finisher rear doorp.283Close rear doorp.283Complex page, some data may not have printed [39]p.283Configuration change, some held jobs were not restored [57]p.284Defective flash detected [51]p.284Disk full [62]p.284Disk must be formatted for use in this devicep.284Disk near full. Securely clearing disk space.p.284Empty the hole punch boxp.285Error reading USB drive. Remove USB.p.285Error reading USB hub. Remove hub.p.285Imaging unit low [84.xy]p.285Imaging unit nearly low [84.xy]p.285Imaging unit very low, [x] estimated pages remain [84.xy]p.285Incompatible output bin [x] [59]p.285Incompatible tray [x] [59]p.286Incorrect paper size, open [paper source] [34]p.286Insert hole punch boxp.286Insert staple cartridgep.286Insert Tray [x]p.286Install bin [x]p.287Install Tray [x]p.287Insufficient memory for Flash Memory Defragment operation [37]p.287Insufficient memory, some Held Jobs were deleted [37]p.287Insufficient memory, some held jobs will not be restored [37]p.288Insufficient memory to collate job [37]p.288Insufficient memory to support Resource Save feature [35]p.288Load [paper source] with [custom string] [paper orientation]p.288Load [paper source] with [custom type name] [paper orientation]p.288Load [paper source] with [paper size] [paper orientation]p.289Load [paper source] with [paper type] [paper size] [paper orientation]p.289Load multipurpose feeder with [custom string] [orientation]p.289Load multipurpose feeder with [custom type name] [orientation]p.289Load multipurpose feeder with [paper size] [orientation]p.290Load multipurpose feeder with [paper type] [paper size] [orientation]p.290Load staplesp.290Maintenance kit low [80.xy]p.290Maintenance kit nearly low [80.xy]p.290Maintenance kit very low [80.xy]p.291Memory full [38]p.291Misfeed cleared, extra sheets in output bin [24y.xx]p.291Network [x] software error [54]p.291Non-Lexmark [supply type], see User’s Guide [33.xy]p.291Not enough free space in flash memory for resources [52]p.292Paper changes neededp.292Parallel port [x] disabled [56]p.292Printer had to restart. Last job may be incomplete.p.292Reattach bin [x]p.293Reattach bins [x] – [y]p.293Reinstall missing or unresponsive cartridge [31.xy]p.294Reinstall missing or unresponsive imaging unit [31.xy]p.294Remove defective disk [61]p.294Remove packaging material, [area name]p.294Remove paper from all binsp.294Remove paper from bin [x]p.294Remove paper from [linked set bin name]p.295Remove paper from standard output binp.295Replace cartridge, printer region mismatch [42.xy]p.295Replace defective imaging unit [31.xy]p.295Replace imaging unit, 0 estimated pages remain [84.xy]p.296Replace maintenance kit, recommended life exceeded [80.xyz]p.296Replace maintenance kit to resume printing [80.xy]p.296Replace missing cartridge [31.xy]p.296Replace missing fuser [31.xyz]p.296Replace missing imaging unit [31.xy]p.296Replace roller kit [81.xx]p.296Replace unsupported cartridge [32.xy]p.296Replace unsupported imaging unit [32.xy]p.297Replace wiperp.297Restore held jobs?p.298Serial port [x] disabled [56]p.298Some held jobs were not restoredp.298Standard network software error [54]p.298Standard USB port disabled [56]p.298Supply needed to complete jobp.299The device is operating in Safe Mode. Some print options may be disabled or provide unexpected results.p.299Too many bins attached [58]p.299Too many disks installed [58]p.299Too many flash options installed [58]p.299Too many trays attached [58]p.299Tray [x] paper size unsupportedp.300Unformatted flash detected [53]p.300Unsupported diskp.300Unsupported option in slot [x] [55]p.300USB port [x] disabled [56]p.300Solving printer problemsp.301Printer does not respondp.301The printer is not respondingp.301Printer display is blankp.303Printing problemsp.303Confidential and other held documents do not printp.303Envelope seals when printingp.304Error message about reading the flash drive appearsp.305Incorrect characters printp.306Job prints from the wrong tray or on the wrong paperp.306Large jobs do not collatep.307Multiple-language PDF files do not printp.307Print job takes longer than expectedp.308Print jobs do not printp.309Printing slows downp.310Tray linking does not workp.310Unexpected page breaks occurp.311Hardware and internal option problemsp.3122100-sheet tray problemsp.312Cannot detect internal optionp.313Internal print server does not operate correctlyp.314Internal Solutions Port does not operate correctlyp.314Tray problemsp.315USB/parallel interface card does not operate correctlyp.316Paper feed problemsp.316Jammed pages are not reprintedp.316Paper frequently jamsp.317Paper jam message remains after jam is clearedp.317Print quality problemsp.318Characters have jagged or uneven edgesp.318Clipped pages or imagesp.318Compressed images appear on printsp.319Gray background on printsp.320Horizontal voids appear on printsp.321Incorrect margins on printsp.322Paper curlp.323Print irregularitiesp.323Print is too darkp.325Print is too lightp.326Printer is printing blank pagesp.327Printer is printing solid black pagesp.328Repeating defects appear on printsp.329Shadow images appear on printsp.330Skewed printp.330Streaked horizontal lines appear on printsp.331Streaked vertical lines appear on printsp.332Toner fog or background shading appears on printsp.334Toner rubs offp.334Toner specks appear on printsp.335Transparency print quality is poorp.335Uneven print densityp.335Vertical voids appear on printsp.336Solving home screen application problemsp.337An application error has occurredp.337Embedded Web Server does not openp.338Contacting customer supportp.339Noticesp.340Product informationp.340Edition noticep.340GOVERNMENT END USERSp.340Trademarksp.341Licensing noticesp.342Noise emission levelsp.342Waste from Electrical and Electronic Equipment (WEEE) directivep.342India E-Waste noticep.343Product disposalp.343Static sensitivity noticep.343ENERGY STARp.343Temperature informationp.343Laser noticep.344Laser advisory labelp.344Power consumptionp.344Product power consumptionp.344Sleep Modep.345Hibernate Modep.345Off modep.346Total energy usagep.346Patent acknowledgmentp.346Multiple model informationp.346STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.347Federal Communications Commission (FCC) compliance information statementp.349日本の VCCI 規定p.350European Community (EC) directives conformityp.350Model-specific informationp.350Federal Communications Commission (FCC) compliance information statementp.351Japanese VCCI noticep.351European Community (EC) directives conformityp.351Radio interference noticep.352Indexp.353
Page 360 of the Lexmark MS818 user manual — Table of contents
Page 360 · click to enlarge
Page 360

Table of contents

Contentsp.2Safety informationp.5Conventionsp.5Overviewp.8Using this guidep.8Finding information about the printerp.8Selecting a location for the printerp.10Additional printer setupp.12Installing internal optionsp.12Available internal optionsp.12Accessing the controller boardp.12Installing a memory cardp.16Installing an Internal Solutions Portp.17Installing an optional cardp.22Installing a printer hard diskp.23Removing a printer hard diskp.27Installing hardware optionsp.29Order of installationp.29Installing optional traysp.30Attaching cablesp.33Setting up the printer softwarep.35Installing the printer softwarep.35Adding available options in the print driverp.35Networkingp.36Preparing to set up the printer on an Ethernet networkp.36Preparing to set up the printer on a wireless networkp.36Connecting the printer to a network using the Wireless Setup Wizardp.37Connecting the printer to a wireless network using the Wi-Fi Protected Setupp.38Connecting the printer to a wireless network using the Embedded Web Serverp.39Setting up serial printing (Windows only)p.40Verifying printer setupp.40Using MS810n, MS810dn, MS811n, MS811dn, MS812dn, MS817n, MS817dn, MS818dnp.41Learning about the printerp.41Printer configurationsp.41Using the printer control panelp.43Understanding the colors of the Sleep button and indicator lightsp.44Loading paper and specialty mediap.44Setting the paper size and typep.44Configuring Universal paper settingsp.44Loading the 250or 550-sheet trayp.45Loading the 2100-sheet trayp.52Loading the multipurpose feederp.59Linking and unlinking traysp.64Linking and unlinking traysp.64Creating a custom name for a paper typep.64Assigning a custom paper typep.65Printingp.66Printing a documentp.66Printing from a computerp.66Adjusting toner darknessp.66Printing from a flash drivep.67Printing from a flash drivep.67Supported flash drives and file typesp.68Printing from a mobile devicep.69Printing from a mobile device using Mopria Print Servicep.69Printing from a mobile device using Google Cloud Printp.69Printing from a mobile device using AirPrintp.69Printing from a mobile device using Lexmark Mobile Printp.70Printing confidential and other held jobsp.70Storing print jobs in the printerp.70Printing held jobsp.71Printing information pagesp.71Printing a font sample listp.71Printing a directory listp.71Canceling a print jobp.71Canceling a print job from the printer control panelp.71Canceling a print job from the computerp.72Managing your printerp.72Finding advanced networking and administrator informationp.72Accessing the remote control panelp.72Configuring supply notifications from the Embedded Web Serverp.72Modifying confidential print settingsp.73Copying printer settings to other printersp.74Printing a menu settings pagep.74Printing a network setup pagep.75Checking the status of parts and suppliesp.75Checking the status of parts and supplies on the printer control panelp.75Checking the status of parts and supplies from the Embedded Web Serverp.75Saving energyp.75Using Eco-Modep.75Reducing printer noisep.76Adjusting Sleep modep.77Using Hibernate modep.77Restoring factory default settingsp.78Securing the printerp.78Using the security lock featurep.78Statement of Volatilityp.78Erasing volatile memoryp.79Erasing non-volatile memoryp.80Erasing printer hard disk memoryp.80Configuring printer hard disk encryptionp.81Finding printer security informationp.82Using MS810dep.83Learning about the printerp.83Printer configurationsp.83Using the printer control panelp.85Understanding the colors of the Sleep button and indicator lightsp.86Understanding the home screenp.86Using the touch-screen buttonsp.88Setting up and using the home screen applicationsp.89Finding the IP address of the computerp.89Finding the IP address of the printerp.89Accessing the Embedded Web Serverp.89Customizing the home screenp.90Activating the home screen applicationsp.90Finding information about the home screen applicationsp.90Using Background and Idle Screenp.90Setting up Forms and Favoritesp.91Understanding Eco-Settingsp.91Exporting and importing a configurationp.92Setting up Remote Operator Panelp.92Loading paper and specialty mediap.93Setting the paper size and typep.93Configuring Universal paper settingsp.93Loading the 250or 550-sheet trayp.93Loading the 2100-sheet trayp.100Loading the multipurpose feederp.107Linking and unlinking traysp.112Linking and unlinking traysp.112Creating a custom name for a paper typep.112Assigning a custom paper typep.113Printingp.113Printing a documentp.113Printing from a computerp.113Printing formsp.114Adjusting toner darknessp.114Printing from a flash drivep.115Printing from a flash drivep.115Supported flash drives and file typesp.116Printing from a mobile devicep.117Printing from a mobile device using Mopria Print Servicep.117Printing from a mobile device using Google Cloud Printp.117Printing from a mobile device using AirPrintp.117Printing from a mobile device using Lexmark Printp.117Printing confidential and other held jobsp.118Storing print jobs in the printerp.118Printing held jobsp.118Printing information pagesp.119Printing a font sample listp.119Printing a directory listp.119Canceling a print jobp.119Canceling a print job from the printer control panelp.119Canceling a print job from the computerp.119Managing your printerp.120Finding advanced networking and administrator informationp.120Checking the virtual displayp.120Configuring supply notifications from the Embedded Web Serverp.120Modifying confidential print settingsp.121Copying printer settings to other printersp.121Printing a menu settings pagep.122Printing a network setup pagep.122Checking the status of parts and suppliesp.122Checking the status of parts and supplies on the printer control panelp.122Checking the status of parts and supplies from the Embedded Web Serverp.122Saving energyp.123Using Eco-Modep.123Reducing printer noisep.123Adjusting Sleep modep.124Using Hibernate modep.124Restoring factory default settingsp.124Securing the printerp.125Using the security lock featurep.125Statement of Volatilityp.125Erasing volatile memoryp.126Erasing non-volatile memoryp.127Erasing printer hard disk memoryp.127Configuring printer hard disk encryptionp.128Finding printer security informationp.129Using MS812dep.130Learning about the printerp.130Printer configurationsp.130Using the printer control panelp.132Understanding the colors of the Sleep button and indicator lightsp.133Understanding the home screenp.133Using the touch-screen buttonsp.134Setting up and using the home screen applicationsp.137Finding the IP address of the computerp.137Finding the IP address of the printerp.137Accessing the Embedded Web Serverp.137Customizing the home screenp.138Activating the home screen applicationsp.138Finding information about the home screen applicationsp.138Using Background and Idle Screenp.138Setting up Forms and Favoritesp.139Understanding Eco-Settingsp.139Exporting and importing a configurationp.140Setting up Remote Operator Panelp.140Loading paper and specialty mediap.141Setting the paper size and typep.141Configuring Universal paper settingsp.141Loading the 250or 550-sheet trayp.142Loading the 2100-sheet trayp.149Loading the multipurpose feederp.156Linking and unlinking traysp.161Linking and unlinking traysp.161Creating a custom name for a paper typep.161Assigning a custom paper typep.162Printingp.162Printing a documentp.162Printing from a computerp.162Printing formsp.162Adjusting toner darknessp.163Printing from a flash drivep.163Printing from a flash drivep.163Supported flash drives and file typesp.164Printing from a mobile devicep.165Printing from a mobile device using Mopria Print Servicep.165Printing from a mobile device using Google Cloud Printp.165Printing from a mobile device using AirPrintp.165Printing from a mobile device using Lexmark Printp.166Printing confidential and other held jobsp.166Storing print jobs in the printerp.166Printing held jobsp.167Printing information pagesp.167Printing a font sample listp.167Printing a directory listp.167Canceling a print jobp.168Canceling a print job from the printer control panelp.168Canceling a print job from the computerp.168Managing your printerp.168Finding advanced networking and administrator informationp.168Checking the virtual displayp.168Configuring supply notifications from the Embedded Web Serverp.168Modifying confidential print settingsp.169Copying printer settings to other printersp.170Printing a menu settings pagep.170Printing a network setup pagep.170Checking the status of parts and suppliesp.171Checking the status of parts and supplies on the printer control panelp.171Checking the status of parts and supplies from the Embedded Web Serverp.171Saving energyp.171Using Eco-Modep.171Reducing printer noisep.172Adjusting Sleep modep.173Using Hibernate modep.173Restoring factory default settingsp.173Securing the printerp.174Using the security lock featurep.174Statement of Volatilityp.174Erasing volatile memoryp.175Erasing non-volatile memoryp.175Erasing printer hard disk memoryp.176Configuring printer hard disk encryptionp.176Finding printer security informationp.177Paper and specialty media guidep.178Using specialty mediap.178Tips on using card stockp.178Tips on using envelopesp.178Tips on using labelsp.179Tips on using transparenciesp.179Paper guidelinesp.180Paper characteristicsp.180Selecting paperp.181Selecting preprinted forms and letterheadp.181Using recycled paper and other office papersp.181Storing paperp.182Supported paper sizes, types, and weightsp.183Paper types and weights supported by the printerp.183Paper sizes supported by the printerp.183Paper sizes, types, and weights supported by the output optionsp.185Understanding the printer menusp.189Menus listp.189Paper menup.190Default Source menup.190Paper Size/Type menup.190Configure MP menup.193Substitute Size menup.193Paper Texture menup.194Paper Weight menup.195Paper Loading menup.197Custom Types menup.198Custom Names menup.198Custom Bin Names menup.199Universal Setup menup.199Bin Setup menup.200Reports menup.201Reports menup.201Network/Ports menup.202Active NIC menup.202Standard Network or Network [x] menup.202Reports menup.204Network Card menup.204TCP/IP menup.205IPv6 menup.206Wireless menup.206AppleTalk menup.207Standard USB menup.208Parallel [x] menup.209Serial [x] menup.212SMTP Setup menup.214Security menup.215Edit Security Setups menup.215Miscellaneous Security Settings menup.216Confidential Print menup.217Erase Temporary Data Files menup.217Security Audit Log menup.218Set Date and Time menup.218Settings menup.220General Settings menup.220Flash Drive Menup.229Print Settings menup.229Print Settingsp.231Setup menup.231Finishing menup.233Quality menup.236Job Accounting menup.236Utilities menup.238XPS menup.238PDF menup.239PostScript menup.239PCL Emul menup.239PPDS menup.242HTML menup.244Image menup.245Help menup.245Saving money and the environmentp.247Adjusting the brightness of the printer displayp.247Saving paper and tonerp.247Using recycled paperp.247Conserving suppliesp.248Recyclingp.248Recycling Lexmark productsp.248Recycling Lexmark packagingp.248Returning Lexmark cartridges for reuse or recyclingp.248Maintaining the printerp.250Ordering suppliesp.250Using genuine Lexmark parts and suppliesp.250Estimated number of remaining pagesp.250Ordering toner cartridgesp.250Ordering an imaging unitp.252Ordering staple cartridgesp.252Ordering a roller kitp.252Ordering a maintenance kitp.252Storing suppliesp.253Replacing suppliesp.254Replacing the toner cartridgep.254Replacing the imaging unitp.256Replacing a staple cartridgep.259Cleaning printer partsp.260Cleaning the printerp.260Emptying the hole punch boxp.261Moving the printerp.262Moving the printer to another locationp.262Shipping the printerp.262Clearing jamsp.263Avoiding jamsp.263Identifying jam locationsp.265Paper jam in the front doorp.267Paper jam in the rear doorp.268Paper jam in the standard binp.271Paper jam in the duplex unitp.271Paper jam in traysp.272Paper jam in the multipurpose feederp.273Paper jam in the staple finisherp.274Staple jam in the finisherp.276Paper jam in the output expanderp.279Paper jam in the mailboxp.280Troubleshootingp.282Understanding the printer messagesp.282Cartridge, imaging unit mismatch [41.xy]p.282Change [paper source] to [custom string] load [orientation]p.282Change [paper source] to [custom type name] load [orientation]p.282Change [paper source] to [paper size] load [orientation]p.282Change [paper source] to [paper type] [paper size] load [orientation]p.282Check tray [x] connectionp.283Close door or insert cartridgep.283Close finisher rear doorp.283Close rear doorp.283Complex page, some data may not have printed [39]p.283Configuration change, some held jobs were not restored [57]p.284Defective flash detected [51]p.284Disk full [62]p.284Disk must be formatted for use in this devicep.284Disk near full. Securely clearing disk space.p.284Empty the hole punch boxp.285Error reading USB drive. Remove USB.p.285Error reading USB hub. Remove hub.p.285Imaging unit low [84.xy]p.285Imaging unit nearly low [84.xy]p.285Imaging unit very low, [x] estimated pages remain [84.xy]p.285Incompatible output bin [x] [59]p.285Incompatible tray [x] [59]p.286Incorrect paper size, open [paper source] [34]p.286Insert hole punch boxp.286Insert staple cartridgep.286Insert Tray [x]p.286Install bin [x]p.287Install Tray [x]p.287Insufficient memory for Flash Memory Defragment operation [37]p.287Insufficient memory, some Held Jobs were deleted [37]p.287Insufficient memory, some held jobs will not be restored [37]p.288Insufficient memory to collate job [37]p.288Insufficient memory to support Resource Save feature [35]p.288Load [paper source] with [custom string] [paper orientation]p.288Load [paper source] with [custom type name] [paper orientation]p.288Load [paper source] with [paper size] [paper orientation]p.289Load [paper source] with [paper type] [paper size] [paper orientation]p.289Load multipurpose feeder with [custom string] [orientation]p.289Load multipurpose feeder with [custom type name] [orientation]p.289Load multipurpose feeder with [paper size] [orientation]p.290Load multipurpose feeder with [paper type] [paper size] [orientation]p.290Load staplesp.290Maintenance kit low [80.xy]p.290Maintenance kit nearly low [80.xy]p.290Maintenance kit very low [80.xy]p.291Memory full [38]p.291Misfeed cleared, extra sheets in output bin [24y.xx]p.291Network [x] software error [54]p.291Non-Lexmark [supply type], see User’s Guide [33.xy]p.291Not enough free space in flash memory for resources [52]p.292Paper changes neededp.292Parallel port [x] disabled [56]p.292Printer had to restart. Last job may be incomplete.p.292Reattach bin [x]p.293Reattach bins [x] – [y]p.293Reinstall missing or unresponsive cartridge [31.xy]p.294Reinstall missing or unresponsive imaging unit [31.xy]p.294Remove defective disk [61]p.294Remove packaging material, [area name]p.294Remove paper from all binsp.294Remove paper from bin [x]p.294Remove paper from [linked set bin name]p.295Remove paper from standard output binp.295Replace cartridge, printer region mismatch [42.xy]p.295Replace defective imaging unit [31.xy]p.295Replace imaging unit, 0 estimated pages remain [84.xy]p.296Replace maintenance kit, recommended life exceeded [80.xyz]p.296Replace maintenance kit to resume printing [80.xy]p.296Replace missing cartridge [31.xy]p.296Replace missing fuser [31.xyz]p.296Replace missing imaging unit [31.xy]p.296Replace roller kit [81.xx]p.296Replace unsupported cartridge [32.xy]p.296Replace unsupported imaging unit [32.xy]p.297Replace wiperp.297Restore held jobs?p.298Serial port [x] disabled [56]p.298Some held jobs were not restoredp.298Standard network software error [54]p.298Standard USB port disabled [56]p.298Supply needed to complete jobp.299The device is operating in Safe Mode. Some print options may be disabled or provide unexpected results.p.299Too many bins attached [58]p.299Too many disks installed [58]p.299Too many flash options installed [58]p.299Too many trays attached [58]p.299Tray [x] paper size unsupportedp.300Unformatted flash detected [53]p.300Unsupported diskp.300Unsupported option in slot [x] [55]p.300USB port [x] disabled [56]p.300Solving printer problemsp.301Printer does not respondp.301The printer is not respondingp.301Printer display is blankp.303Printing problemsp.303Confidential and other held documents do not printp.303Envelope seals when printingp.304Error message about reading the flash drive appearsp.305Incorrect characters printp.306Job prints from the wrong tray or on the wrong paperp.306Large jobs do not collatep.307Multiple-language PDF files do not printp.307Print job takes longer than expectedp.308Print jobs do not printp.309Printing slows downp.310Tray linking does not workp.310Unexpected page breaks occurp.311Hardware and internal option problemsp.3122100-sheet tray problemsp.312Cannot detect internal optionp.313Internal print server does not operate correctlyp.314Internal Solutions Port does not operate correctlyp.314Tray problemsp.315USB/parallel interface card does not operate correctlyp.316Paper feed problemsp.316Jammed pages are not reprintedp.316Paper frequently jamsp.317Paper jam message remains after jam is clearedp.317Print quality problemsp.318Characters have jagged or uneven edgesp.318Clipped pages or imagesp.318Compressed images appear on printsp.319Gray background on printsp.320Horizontal voids appear on printsp.321Incorrect margins on printsp.322Paper curlp.323Print irregularitiesp.323Print is too darkp.325Print is too lightp.326Printer is printing blank pagesp.327Printer is printing solid black pagesp.328Repeating defects appear on printsp.329Shadow images appear on printsp.330Skewed printp.330Streaked horizontal lines appear on printsp.331Streaked vertical lines appear on printsp.332Toner fog or background shading appears on printsp.334Toner rubs offp.334Toner specks appear on printsp.335Transparency print quality is poorp.335Uneven print densityp.335Vertical voids appear on printsp.336Solving home screen application problemsp.337An application error has occurredp.337Embedded Web Server does not openp.338Contacting customer supportp.339Noticesp.340Product informationp.340Edition noticep.340GOVERNMENT END USERSp.340Trademarksp.341Licensing noticesp.342Noise emission levelsp.342Waste from Electrical and Electronic Equipment (WEEE) directivep.342India E-Waste noticep.343Product disposalp.343Static sensitivity noticep.343ENERGY STARp.343Temperature informationp.343Laser noticep.344Laser advisory labelp.344Power consumptionp.344Product power consumptionp.344Sleep Modep.345Hibernate Modep.345Off modep.346Total energy usagep.346Patent acknowledgmentp.346Multiple model informationp.346STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.347Federal Communications Commission (FCC) compliance information statementp.349日本の VCCI 規定p.350European Community (EC) directives conformityp.350Model-specific informationp.350Federal Communications Commission (FCC) compliance information statementp.351Japanese VCCI noticep.351European Community (EC) directives conformityp.351Radio interference noticep.352Indexp.353
Page 361 of the Lexmark MS818 user manual — Table of contents
Page 361 · click to enlarge
Page 361

Table of contents

Contentsp.2Safety informationp.5Conventionsp.5Overviewp.8Using this guidep.8Finding information about the printerp.8Selecting a location for the printerp.10Additional printer setupp.12Installing internal optionsp.12Available internal optionsp.12Accessing the controller boardp.12Installing a memory cardp.16Installing an Internal Solutions Portp.17Installing an optional cardp.22Installing a printer hard diskp.23Removing a printer hard diskp.27Installing hardware optionsp.29Order of installationp.29Installing optional traysp.30Attaching cablesp.33Setting up the printer softwarep.35Installing the printer softwarep.35Adding available options in the print driverp.35Networkingp.36Preparing to set up the printer on an Ethernet networkp.36Preparing to set up the printer on a wireless networkp.36Connecting the printer to a network using the Wireless Setup Wizardp.37Connecting the printer to a wireless network using the Wi-Fi Protected Setupp.38Connecting the printer to a wireless network using the Embedded Web Serverp.39Setting up serial printing (Windows only)p.40Verifying printer setupp.40Using MS810n, MS810dn, MS811n, MS811dn, MS812dn, MS817n, MS817dn, MS818dnp.41Learning about the printerp.41Printer configurationsp.41Using the printer control panelp.43Understanding the colors of the Sleep button and indicator lightsp.44Loading paper and specialty mediap.44Setting the paper size and typep.44Configuring Universal paper settingsp.44Loading the 250or 550-sheet trayp.45Loading the 2100-sheet trayp.52Loading the multipurpose feederp.59Linking and unlinking traysp.64Linking and unlinking traysp.64Creating a custom name for a paper typep.64Assigning a custom paper typep.65Printingp.66Printing a documentp.66Printing from a computerp.66Adjusting toner darknessp.66Printing from a flash drivep.67Printing from a flash drivep.67Supported flash drives and file typesp.68Printing from a mobile devicep.69Printing from a mobile device using Mopria Print Servicep.69Printing from a mobile device using Google Cloud Printp.69Printing from a mobile device using AirPrintp.69Printing from a mobile device using Lexmark Mobile Printp.70Printing confidential and other held jobsp.70Storing print jobs in the printerp.70Printing held jobsp.71Printing information pagesp.71Printing a font sample listp.71Printing a directory listp.71Canceling a print jobp.71Canceling a print job from the printer control panelp.71Canceling a print job from the computerp.72Managing your printerp.72Finding advanced networking and administrator informationp.72Accessing the remote control panelp.72Configuring supply notifications from the Embedded Web Serverp.72Modifying confidential print settingsp.73Copying printer settings to other printersp.74Printing a menu settings pagep.74Printing a network setup pagep.75Checking the status of parts and suppliesp.75Checking the status of parts and supplies on the printer control panelp.75Checking the status of parts and supplies from the Embedded Web Serverp.75Saving energyp.75Using Eco-Modep.75Reducing printer noisep.76Adjusting Sleep modep.77Using Hibernate modep.77Restoring factory default settingsp.78Securing the printerp.78Using the security lock featurep.78Statement of Volatilityp.78Erasing volatile memoryp.79Erasing non-volatile memoryp.80Erasing printer hard disk memoryp.80Configuring printer hard disk encryptionp.81Finding printer security informationp.82Using MS810dep.83Learning about the printerp.83Printer configurationsp.83Using the printer control panelp.85Understanding the colors of the Sleep button and indicator lightsp.86Understanding the home screenp.86Using the touch-screen buttonsp.88Setting up and using the home screen applicationsp.89Finding the IP address of the computerp.89Finding the IP address of the printerp.89Accessing the Embedded Web Serverp.89Customizing the home screenp.90Activating the home screen applicationsp.90Finding information about the home screen applicationsp.90Using Background and Idle Screenp.90Setting up Forms and Favoritesp.91Understanding Eco-Settingsp.91Exporting and importing a configurationp.92Setting up Remote Operator Panelp.92Loading paper and specialty mediap.93Setting the paper size and typep.93Configuring Universal paper settingsp.93Loading the 250or 550-sheet trayp.93Loading the 2100-sheet trayp.100Loading the multipurpose feederp.107Linking and unlinking traysp.112Linking and unlinking traysp.112Creating a custom name for a paper typep.112Assigning a custom paper typep.113Printingp.113Printing a documentp.113Printing from a computerp.113Printing formsp.114Adjusting toner darknessp.114Printing from a flash drivep.115Printing from a flash drivep.115Supported flash drives and file typesp.116Printing from a mobile devicep.117Printing from a mobile device using Mopria Print Servicep.117Printing from a mobile device using Google Cloud Printp.117Printing from a mobile device using AirPrintp.117Printing from a mobile device using Lexmark Printp.117Printing confidential and other held jobsp.118Storing print jobs in the printerp.118Printing held jobsp.118Printing information pagesp.119Printing a font sample listp.119Printing a directory listp.119Canceling a print jobp.119Canceling a print job from the printer control panelp.119Canceling a print job from the computerp.119Managing your printerp.120Finding advanced networking and administrator informationp.120Checking the virtual displayp.120Configuring supply notifications from the Embedded Web Serverp.120Modifying confidential print settingsp.121Copying printer settings to other printersp.121Printing a menu settings pagep.122Printing a network setup pagep.122Checking the status of parts and suppliesp.122Checking the status of parts and supplies on the printer control panelp.122Checking the status of parts and supplies from the Embedded Web Serverp.122Saving energyp.123Using Eco-Modep.123Reducing printer noisep.123Adjusting Sleep modep.124Using Hibernate modep.124Restoring factory default settingsp.124Securing the printerp.125Using the security lock featurep.125Statement of Volatilityp.125Erasing volatile memoryp.126Erasing non-volatile memoryp.127Erasing printer hard disk memoryp.127Configuring printer hard disk encryptionp.128Finding printer security informationp.129Using MS812dep.130Learning about the printerp.130Printer configurationsp.130Using the printer control panelp.132Understanding the colors of the Sleep button and indicator lightsp.133Understanding the home screenp.133Using the touch-screen buttonsp.134Setting up and using the home screen applicationsp.137Finding the IP address of the computerp.137Finding the IP address of the printerp.137Accessing the Embedded Web Serverp.137Customizing the home screenp.138Activating the home screen applicationsp.138Finding information about the home screen applicationsp.138Using Background and Idle Screenp.138Setting up Forms and Favoritesp.139Understanding Eco-Settingsp.139Exporting and importing a configurationp.140Setting up Remote Operator Panelp.140Loading paper and specialty mediap.141Setting the paper size and typep.141Configuring Universal paper settingsp.141Loading the 250or 550-sheet trayp.142Loading the 2100-sheet trayp.149Loading the multipurpose feederp.156Linking and unlinking traysp.161Linking and unlinking traysp.161Creating a custom name for a paper typep.161Assigning a custom paper typep.162Printingp.162Printing a documentp.162Printing from a computerp.162Printing formsp.162Adjusting toner darknessp.163Printing from a flash drivep.163Printing from a flash drivep.163Supported flash drives and file typesp.164Printing from a mobile devicep.165Printing from a mobile device using Mopria Print Servicep.165Printing from a mobile device using Google Cloud Printp.165Printing from a mobile device using AirPrintp.165Printing from a mobile device using Lexmark Printp.166Printing confidential and other held jobsp.166Storing print jobs in the printerp.166Printing held jobsp.167Printing information pagesp.167Printing a font sample listp.167Printing a directory listp.167Canceling a print jobp.168Canceling a print job from the printer control panelp.168Canceling a print job from the computerp.168Managing your printerp.168Finding advanced networking and administrator informationp.168Checking the virtual displayp.168Configuring supply notifications from the Embedded Web Serverp.168Modifying confidential print settingsp.169Copying printer settings to other printersp.170Printing a menu settings pagep.170Printing a network setup pagep.170Checking the status of parts and suppliesp.171Checking the status of parts and supplies on the printer control panelp.171Checking the status of parts and supplies from the Embedded Web Serverp.171Saving energyp.171Using Eco-Modep.171Reducing printer noisep.172Adjusting Sleep modep.173Using Hibernate modep.173Restoring factory default settingsp.173Securing the printerp.174Using the security lock featurep.174Statement of Volatilityp.174Erasing volatile memoryp.175Erasing non-volatile memoryp.175Erasing printer hard disk memoryp.176Configuring printer hard disk encryptionp.176Finding printer security informationp.177Paper and specialty media guidep.178Using specialty mediap.178Tips on using card stockp.178Tips on using envelopesp.178Tips on using labelsp.179Tips on using transparenciesp.179Paper guidelinesp.180Paper characteristicsp.180Selecting paperp.181Selecting preprinted forms and letterheadp.181Using recycled paper and other office papersp.181Storing paperp.182Supported paper sizes, types, and weightsp.183Paper types and weights supported by the printerp.183Paper sizes supported by the printerp.183Paper sizes, types, and weights supported by the output optionsp.185Understanding the printer menusp.189Menus listp.189Paper menup.190Default Source menup.190Paper Size/Type menup.190Configure MP menup.193Substitute Size menup.193Paper Texture menup.194Paper Weight menup.195Paper Loading menup.197Custom Types menup.198Custom Names menup.198Custom Bin Names menup.199Universal Setup menup.199Bin Setup menup.200Reports menup.201Reports menup.201Network/Ports menup.202Active NIC menup.202Standard Network or Network [x] menup.202Reports menup.204Network Card menup.204TCP/IP menup.205IPv6 menup.206Wireless menup.206AppleTalk menup.207Standard USB menup.208Parallel [x] menup.209Serial [x] menup.212SMTP Setup menup.214Security menup.215Edit Security Setups menup.215Miscellaneous Security Settings menup.216Confidential Print menup.217Erase Temporary Data Files menup.217Security Audit Log menup.218Set Date and Time menup.218Settings menup.220General Settings menup.220Flash Drive Menup.229Print Settings menup.229Print Settingsp.231Setup menup.231Finishing menup.233Quality menup.236Job Accounting menup.236Utilities menup.238XPS menup.238PDF menup.239PostScript menup.239PCL Emul menup.239PPDS menup.242HTML menup.244Image menup.245Help menup.245Saving money and the environmentp.247Adjusting the brightness of the printer displayp.247Saving paper and tonerp.247Using recycled paperp.247Conserving suppliesp.248Recyclingp.248Recycling Lexmark productsp.248Recycling Lexmark packagingp.248Returning Lexmark cartridges for reuse or recyclingp.248Maintaining the printerp.250Ordering suppliesp.250Using genuine Lexmark parts and suppliesp.250Estimated number of remaining pagesp.250Ordering toner cartridgesp.250Ordering an imaging unitp.252Ordering staple cartridgesp.252Ordering a roller kitp.252Ordering a maintenance kitp.252Storing suppliesp.253Replacing suppliesp.254Replacing the toner cartridgep.254Replacing the imaging unitp.256Replacing a staple cartridgep.259Cleaning printer partsp.260Cleaning the printerp.260Emptying the hole punch boxp.261Moving the printerp.262Moving the printer to another locationp.262Shipping the printerp.262Clearing jamsp.263Avoiding jamsp.263Identifying jam locationsp.265Paper jam in the front doorp.267Paper jam in the rear doorp.268Paper jam in the standard binp.271Paper jam in the duplex unitp.271Paper jam in traysp.272Paper jam in the multipurpose feederp.273Paper jam in the staple finisherp.274Staple jam in the finisherp.276Paper jam in the output expanderp.279Paper jam in the mailboxp.280Troubleshootingp.282Understanding the printer messagesp.282Cartridge, imaging unit mismatch [41.xy]p.282Change [paper source] to [custom string] load [orientation]p.282Change [paper source] to [custom type name] load [orientation]p.282Change [paper source] to [paper size] load [orientation]p.282Change [paper source] to [paper type] [paper size] load [orientation]p.282Check tray [x] connectionp.283Close door or insert cartridgep.283Close finisher rear doorp.283Close rear doorp.283Complex page, some data may not have printed [39]p.283Configuration change, some held jobs were not restored [57]p.284Defective flash detected [51]p.284Disk full [62]p.284Disk must be formatted for use in this devicep.284Disk near full. Securely clearing disk space.p.284Empty the hole punch boxp.285Error reading USB drive. Remove USB.p.285Error reading USB hub. Remove hub.p.285Imaging unit low [84.xy]p.285Imaging unit nearly low [84.xy]p.285Imaging unit very low, [x] estimated pages remain [84.xy]p.285Incompatible output bin [x] [59]p.285Incompatible tray [x] [59]p.286Incorrect paper size, open [paper source] [34]p.286Insert hole punch boxp.286Insert staple cartridgep.286Insert Tray [x]p.286Install bin [x]p.287Install Tray [x]p.287Insufficient memory for Flash Memory Defragment operation [37]p.287Insufficient memory, some Held Jobs were deleted [37]p.287Insufficient memory, some held jobs will not be restored [37]p.288Insufficient memory to collate job [37]p.288Insufficient memory to support Resource Save feature [35]p.288Load [paper source] with [custom string] [paper orientation]p.288Load [paper source] with [custom type name] [paper orientation]p.288Load [paper source] with [paper size] [paper orientation]p.289Load [paper source] with [paper type] [paper size] [paper orientation]p.289Load multipurpose feeder with [custom string] [orientation]p.289Load multipurpose feeder with [custom type name] [orientation]p.289Load multipurpose feeder with [paper size] [orientation]p.290Load multipurpose feeder with [paper type] [paper size] [orientation]p.290Load staplesp.290Maintenance kit low [80.xy]p.290Maintenance kit nearly low [80.xy]p.290Maintenance kit very low [80.xy]p.291Memory full [38]p.291Misfeed cleared, extra sheets in output bin [24y.xx]p.291Network [x] software error [54]p.291Non-Lexmark [supply type], see User’s Guide [33.xy]p.291Not enough free space in flash memory for resources [52]p.292Paper changes neededp.292Parallel port [x] disabled [56]p.292Printer had to restart. Last job may be incomplete.p.292Reattach bin [x]p.293Reattach bins [x] – [y]p.293Reinstall missing or unresponsive cartridge [31.xy]p.294Reinstall missing or unresponsive imaging unit [31.xy]p.294Remove defective disk [61]p.294Remove packaging material, [area name]p.294Remove paper from all binsp.294Remove paper from bin [x]p.294Remove paper from [linked set bin name]p.295Remove paper from standard output binp.295Replace cartridge, printer region mismatch [42.xy]p.295Replace defective imaging unit [31.xy]p.295Replace imaging unit, 0 estimated pages remain [84.xy]p.296Replace maintenance kit, recommended life exceeded [80.xyz]p.296Replace maintenance kit to resume printing [80.xy]p.296Replace missing cartridge [31.xy]p.296Replace missing fuser [31.xyz]p.296Replace missing imaging unit [31.xy]p.296Replace roller kit [81.xx]p.296Replace unsupported cartridge [32.xy]p.296Replace unsupported imaging unit [32.xy]p.297Replace wiperp.297Restore held jobs?p.298Serial port [x] disabled [56]p.298Some held jobs were not restoredp.298Standard network software error [54]p.298Standard USB port disabled [56]p.298Supply needed to complete jobp.299The device is operating in Safe Mode. Some print options may be disabled or provide unexpected results.p.299Too many bins attached [58]p.299Too many disks installed [58]p.299Too many flash options installed [58]p.299Too many trays attached [58]p.299Tray [x] paper size unsupportedp.300Unformatted flash detected [53]p.300Unsupported diskp.300Unsupported option in slot [x] [55]p.300USB port [x] disabled [56]p.300Solving printer problemsp.301Printer does not respondp.301The printer is not respondingp.301Printer display is blankp.303Printing problemsp.303Confidential and other held documents do not printp.303Envelope seals when printingp.304Error message about reading the flash drive appearsp.305Incorrect characters printp.306Job prints from the wrong tray or on the wrong paperp.306Large jobs do not collatep.307Multiple-language PDF files do not printp.307Print job takes longer than expectedp.308Print jobs do not printp.309Printing slows downp.310Tray linking does not workp.310Unexpected page breaks occurp.311Hardware and internal option problemsp.3122100-sheet tray problemsp.312Cannot detect internal optionp.313Internal print server does not operate correctlyp.314Internal Solutions Port does not operate correctlyp.314Tray problemsp.315USB/parallel interface card does not operate correctlyp.316Paper feed problemsp.316Jammed pages are not reprintedp.316Paper frequently jamsp.317Paper jam message remains after jam is clearedp.317Print quality problemsp.318Characters have jagged or uneven edgesp.318Clipped pages or imagesp.318Compressed images appear on printsp.319Gray background on printsp.320Horizontal voids appear on printsp.321Incorrect margins on printsp.322Paper curlp.323Print irregularitiesp.323Print is too darkp.325Print is too lightp.326Printer is printing blank pagesp.327Printer is printing solid black pagesp.328Repeating defects appear on printsp.329Shadow images appear on printsp.330Skewed printp.330Streaked horizontal lines appear on printsp.331Streaked vertical lines appear on printsp.332Toner fog or background shading appears on printsp.334Toner rubs offp.334Toner specks appear on printsp.335Transparency print quality is poorp.335Uneven print densityp.335Vertical voids appear on printsp.336Solving home screen application problemsp.337An application error has occurredp.337Embedded Web Server does not openp.338Contacting customer supportp.339Noticesp.340Product informationp.340Edition noticep.340GOVERNMENT END USERSp.340Trademarksp.341Licensing noticesp.342Noise emission levelsp.342Waste from Electrical and Electronic Equipment (WEEE) directivep.342India E-Waste noticep.343Product disposalp.343Static sensitivity noticep.343ENERGY STARp.343Temperature informationp.343Laser noticep.344Laser advisory labelp.344Power consumptionp.344Product power consumptionp.344Sleep Modep.345Hibernate Modep.345Off modep.346Total energy usagep.346Patent acknowledgmentp.346Multiple model informationp.346STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.347Federal Communications Commission (FCC) compliance information statementp.349日本の VCCI 規定p.350European Community (EC) directives conformityp.350Model-specific informationp.350Federal Communications Commission (FCC) compliance information statementp.351Japanese VCCI noticep.351European Community (EC) directives conformityp.351Radio interference noticep.352Indexp.353
Page 362 of the Lexmark MS818 user manual — X XPS menu 238
Page 362 · click to enlarge
Page 362

V verify print jobs 70, 118, 166

printing from a Macintosh

computer 167 printing from Windows 167 verifying printer setup 40 vertical voids appear 336 virtual display

checking, using Embedded Web

Server 120, 168 voids appear 336 volatile memory 78, 125, 174

erasing 79, 126, 175 volatility

statement of 78, 125, 174

W wiping printer hard disk 80 wiping the printer hard disk 127, 176 Wireless menu 206 wireless network

configuration information 36 wireless network setup

using the Embedded Web

Server 39 wireless setup wizard

X XPS menu 238

Index 362 · using 37

Sources

References & links

Pages referenced in this manual — manufacturer, support and downloads.

Ask about the Lexmark MS818

Owners and our team usually reply within a day — and your question helps the next person too.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
No questions yet about the Lexmark MS818

Be the first to ask — other owners or our team will answer.

Original document

Lexmark MS818 manual PDF

362 pages·17.8 MB·Printer·PDF
Click any page above to open it here
Page 1 / …
100%
Loading pages…