
User Manual
Machine type(s):
Models:
230, 238, 430, 438, 490


Safety information 5
Conventions
LET OP: Note indicates a potentially dangerous situation that can cause personal injury.
Examples of such warnings are:
PLEASE NOTE: RISK OF INJURY: Danger of injury.
NOTE: DANGER OF ELECTRIC SHOCKS: Risk of electric shock.
NOTE: HOT SURFACE: Risk of burning in contact.
NOTE: TILT RISK: - Smell danger.
PLEASE NOTE: RISK OF INJURY: To avoid the risk of electric shocks or fire, you need to connect the power cord directly to a grounded outlet close to the product and which is easily accessible.
PLEASE NOTE: RISK OF INJURY: Use only the power cord supplied with this product or a replacement component approved by the manufacturer to prevent fire or electric shocks.
PLEASE NOTE: RISK OF INJURY: You must not use this product with extension cords, plug boxes, distributors or UPS devices. The power capacity of this type of accessories can easily be exceeded by a laser printer, which can lead to poor printer performance, property damage or fire.
PLEASE NOTE: RISK OF INJURY: For this product, only use a Lexmark overvoltage protection that is correctly connected between the printer and the supplied power cord. Using non-Lexmark span protections can lead to poor printer performance, property damage or fire.
NOTE: DANGER OF ELECTRIC SHOCKS: To avoid the risk of electric shocks, do not place or use this product near water or damp locations.
NOTE: DANGER OF ELECTRIC SHOCKS: To avoid the risk of electric shocks, you should not enable this product during thunderstorm and do not connect electrical cables or power cables such as a fax cord, mains cable or telephone cable.

Safety information 6
PLEASE NOTE: RISK OF INJURY: You should not cut, rotate, tie, pinch or place heavy objects on the cord. Make sure that no abrasions can occur on the power cord or pressure is placed on the cable. Make sure the power cord doesn't get entangled between two objects, like a piece of furniture and a wall. If any of these things happen, there's a chance of fire or electric shocks. Check the power cord regularly for such problems. Pull the power cord plug out of the socket before checking the power cable.
NOTE: DANGER OF ELECTRIC SHOCKS: To avoid the risk of electric shocks, make sure that all external connections (such as Ethernet and telephone system connections) are correctly placed in marked ports.
NOTE: DANGER OF ELECTRIC SHOCKS: If you want access to the controller card or install optional hardware or memory devices after setting up the printer, turn off the printer and pull the plug before continuing in order to avoid risk of electric shocks. If you have connected other devices to the printer, disable them and unplug the cables from the printer.
NOTE: DANGER OF ELECTRIC SHOCKS: To avoid the risk of electric shocks, pull the power cord plug out and unplug all cables connected to the printer before cleaning the outside of the printer.
PLEASE NOTE: RISK OF INJURY: If the printer weighs more than 18 kg (40 lb), it must be moved by two or more trained staff.
PLEASE NOTE: RISK OF INJURY: Follow these guidelines when moving the printer to prevent injury or damage of your printer:
NOTE: TILT RISK: When installing one or more options on your printer or MFP, a chassis with swivel wheels, printer cabinet or other device may be required to prevent instability that can cause injury. More information on supported layouts can be found at www.lexmark.com/multifunctionprinters.

Safety information 7
NOTE: TILT RISK: Make sure to place paper separately in each tray to prevent equipment instability. Keep all other drawers closed until you need them.
NOTE: HOT SURFACE: The inside of the printer can be hot. To avoid injury, you should cool a hot surface before touching it.
PLEASE NOTE: DANGER OF TROUBLE: Be careful when using parts with this label to avoid getting stuck between moving parts. The danger of a problem can occur near moving parts, such as gears, doors, drawers and covers.
PLEASE NOTE: RISK OF INJURY: This product uses a laser. The use of other modes, methods or procedures than those mentioned in the User's Manual may result in exposure to hazardous radiation.
PLEASE NOTE: RISK OF INJURY: The lithium battery in this product should not be replaced. If the lithium battery is not properly replaced, there is an explosion risk. A lithium battery shall not be recharged, disassembled or incinerated. Dispose of used lithium batteries as instructed by the manufacturer and keep in mind local regulations.
This product has been developed, tested and approved together with specific components of the manufacturer according to strict safety standards applicable worldwide. The safety features of certain components are not always clearly visible. The manufacturer shall not be responsible for the use of other replacement parts.
Have maintenance and repair operations not described in the user documentation carried out by a service representative.
This product uses a printing process that heats the print material. The heat can cause the printing material to release certain substances. Study the section in the operating instructions that discuss guidelines for selecting printing materials to prevent harmful emissions.
This product produces small amounts of ozone during normal use and may be equipped with a filter to keep ozone concentrations well below the recommended exposure limits. To prevent high ozone concentrations during intensive use, place this product in a well ventilated area and replace the ozone and exhaust filters if specified in the maintenance instructions of the product. If filters are not referred to in the maintenance instructions of the product, this product does not contain any filters that need to be replaced.
KEEP THESE INSTRUCTIONS.

Dealing with the printer 8
Find information about the printer

Dealing with the printer 9

PLEASE NOTE: RISK OF INJURY: To avoid the risk of electric shocks or fire, you need to connect the power cord directly to a grounded outlet close to the product and which is easily accessible.

Dealing with the printer 10

NOTE: TILT RISK: When installing one or more options on your printer or MFP, a chassis with swivel wheels, printer cabinet or other device may be required to prevent instability that can cause injury. More information on supported layouts can be found at www.lexmark.com/multifunctionprinters.

Dealing with the printer 11
NOTE: TILT RISK: Make sure to place paper separately in each tray to prevent equipment instability. Keep all other drawers closed until you need them.
You can customize the printer by adding optional drawers for 250 or 550 sheets. See 'Install optional charging' on page 122 for more information.

NOTE: DANGER OF ELECTRIC SHOCKS: Do not turn this product on during thunderstorm or make electrical or wired connections, such as faxes, power cords or telephone cables, to prevent electric shocks.
PLEASE NOTE: RISK OF INJURY: To avoid the risk of electric shocks or fire, you need to connect the power cord directly to a grounded outlet close to the product and which is easily accessible.
PLEASE NOTE: RISK OF INJURY: Use only the power cord supplied with this product or a replacement component approved by the manufacturer to prevent fire or electric shocks.
1 Control Panel · 7 Valve A

Dealing with the printer 12



Dealing with the printer 13
6 Button Back (Back) This lets you go back to the previous screen.
The printer is disabled or the printer's slumber mode is active.
Blue The printer is ready or processed data.
Red The printer requires intervention by the user.
The printer is disabled or processed data.
Brandt orange The printer is in sleep mode.
Flick orange The slumber mode of the printer is active.
Front Component · Printer status indicator lamp · Light on-off button Printer status

Place paper and special printing material 14
Set the size and type of paper for special material
1 In the start screen, browse for:
> Paper > > Load Configuration > > Paper Size/Species >
2 Select a paper source and then set the size and type of paper for the special material.
1 Browse the control panel to:
> Paper > > Media Configuration > > Universal Setting >
2 Select Standing width or Standing height and press on.
3 Adjust the settings and press .
NOTE: TILT RISK: Make sure to place paper separately in each tray to prevent equipment instability. Keep all other drawers closed until you need them.
1 Remove the drawer.


Place paper and special printing material 15
2 Set the paper guides to the size of your paper you want to place.

3 Bend the paper, fan it out and align the edges before inserting it into the printer.

4 Place the stack of paper with the print side down and make sure that the side guides are firmly against the paper.

5 Put the drawer back.
If necessary, set the paper size and type of paper via the control panel on the basis of the paper placed.

Place paper and special printing material 16
1 Open the multifunction input.

2 Set the guide to the paper size you want to place.

3 Bend the paper, fan it out and align the edges before inserting it into the printer.

4 Place paper with the print side to top in the printer.

Place paper and special printing material 17
5 Set the paper size and type of paper on the control panel.
1 Open a web browser and type the printer IP address in the address bar.
2 Click on Institutions > Paper > Load Configuration.
3 Set a paper size and type of paper that match the drawers you want to link.
4 Save the settings.
5 Click on Institutions > Device > Maintenance > Configuration Menu > Load Configuration.
6 Set the load link Automatic.
7 Save the settings.
To disconnect loading, make sure there are no two drawers with the same paper size or type of paper settings.

Supported paper formats

A5 210 x 148 mm (5.8 x 8.3 inches) X
A6* 105 x 148 mm (4,1 x 5,8 inch) X
Hagaki 100 x 148 mm (3.9 x 5.8 inches) X X
Folio 216 x 330 mm (8,5 x 13 inches)
Of 76.2 x 127 mm (3 x 5 inches) 216 x 356 mm (8.5 x 14 inches).
9-envelope 98 x 225 mm (3.9 x 8.9 inches) X X
* This paper format is not supported in the optional tray.
Paper support 18


B5 Envelope 176 x 250 mm (6.9 x 9.8 inches) X X
Other Envelope Of 76.2 x 127 mm (3 x 5 inches) 216 x 356 mm (8.5 x 14 inches).
* This paper format is not supported in the optional tray.

1 The printer supports occasional use of single sided paper labels designed for laser printers. You are advised not to print more than 20 pages of paper labels per month. Vinyleti-kets, labels for pharmacies and double sided labels are not supported.
2 Bank note and heavy paper are supported in double-sided mode up to a paper weight of 90 g/m2.
Paper support 19

Tray Multifunction input Double-sided printing
Paper weight 60-120 g/m2 (16-32 lb) 60-216 g/ m2 (16-58 lb), 60.0390 g/M2 (16.0.224 lb).
Paper support 20

Print from a computer
1 Open the Print dialog from the document you want to print.
2 Adjust the settings if necessary.
3 Print the document.
LexmarkTM Mobile Print allows you to send documents and images directly to a supported Lex mark printer.
1 Open the document and send or share it to Lexmark Mobile Print.
2 Select a printer.
3 Print the document.
Google Cloud PrintTM is a mobile printing solution that allows you to print on printers compatible with Gooley Cloud printer using enabled applications on mobile devices.
1 Launch a enabled application from the home screen of your mobile device.
2 Tap Print and select a printer.
3 Print the document.
Mopria® Print Service is a mobile printing solution intended for AndroidTM mobile devices
4.4 or later. You can directly print on any printer that is compatible with Mopra.
1 Launch a compatible application from the home screen of your mobile device.
2 Tap Print and select the printer.
3 Send the print job.
Print 21

AirPrint is a mobile printing solution that allows you to print directly from Apple devices on printers compatible with AirPrint.
1 Launch a compatible application from the home screen of your mobile device.
2 Select an item to print and then tap the Share icon.
3 Tap Print and select a printer.
4 Print the document.
1 Browse the control panel to:
> Reports > > Print > > Print fonts
2 Select PCL fonts or PostScript Fonts and then press .
Print 22

Printer Menu Information 23
Menu Overview
Troubleshooting • Test page
Select the language of the text on the display.
Specifies the country or region in which the printer is set to work.
Run the installation wizard.

Printer Menu Information 24
Specify what information is displayed in the home screen.
Show Text 1 Show text 2
Adjust the time and date of the printer.
Current date and time Manual Date & Time Set Date & Time [MM-DD-YYYY*] Time notation [12 hours AM/PM*] time zone [GMT*] Network time protocol
This will specify the size units for paper formats.
U.S.* Metric
10-300 (60*) Set the inactivity time in seconds before the screen displays the start screen or before the printer automatically unsubscribes a user.
Connect to an external VNC client (Virtual Network Computing) to run the remote control panel.
Set the authentication type when accessing the VNC client server.
Password VNC Specify the password for connection to the VNC client server.
Display the estimated status information of the supplies.
Show estimates* Do not show estimates

Printer Menu Information 25
This sets the unit that the printer uses to estimate supply consumption and activate custom notifications when intervention is required by the user.
Set the number of times that alarm goes off when toner cartridge is almost empty.
From One Time* Continuous
This configures the notification settings that indicate when user intervention is required.
Custom supply notifications
Set the printer to automatically check if paper is stuck.
Allow the printer to continue processing or printing a task automatically after certain types of intervention have been corrected.
Set the printer to restart if an error occurs.
Always restart* Never restart Restart at inactive mode
This will set the number of times that the printer automatically restarts.
Auto Restart Limit
Set the number of seconds before automatically restarting the printer.
Window Auto Restart
Show read-only information about restart the counter.
Teller Auto Restart
Set the printer to display a message when a short paper error occurs.
Show paper error too short

Printer Menu Information 26
Set the printer to send the entire page to memory before printing the task.
Restore content after failure
Set the printer to reprint pages that have been blocked.
Allow printing when the display is disabled.
Print while the display is off
Print while the display is off* Enable Display during printing
Set after how much time to be inactive the printer switches to sleep mode.
This will set up the printer after how much time it switches to slumber mode.
Disabled 1 hour 2 hours 3 hours 6 hours 1 day 2 days 3 days* 1 week 2 weeks 1 month
Set the printer to slumber mode even if there is an active Ethernet connection.
Snooze timeout on connection
Do not enable sleep mode*
Minimize the use of energy, paper or special printing material.
Out* Energy Energy/paper Paper

Printer Menu Information 27
Information sent to Lexmark
Send information about printer usage and performance to Lexmark.
Save Use of supplies and pages (anonymous) Device performance (anonimal) None of the above*
Restore the printer's default settings.
Restore All Settings Recover Printer settings Restore Networking Settings
Configuration Menu
Change the printer's USB driver mode to improve compatibility with a PC.
Set the USB port to run at full speed and disable its high-speed functions.
Set the printer to have the same settings for paper type and paper size.
The message Input tray placed Show.
Show message entry tray placed
Out Only for Unknown Formats* Always

Printer Menu Information 28
Specify the page's print position while placing A5 paper.
Short side Long side*
Set the paper source to be filled when a message is displayed in order to place paper.
Set the paper source to be filled when a message is displayed in order to place envelopes.
Auto* U-loader Handm. input envelope
Set the printer to resolve notifications about changing paper or envelopes.
User Questions* Continue Using Current
Print reports about printer settings, printing events and event logs.
Page Menu Settings Event Log Summary eventlog HealthCheck statistics
Consumption and counters of supplies
Restore supply usage history or supply page counters after replacing the toner cartridge and image processing unit.
Reset the history of supply usage Teller black cartridge Teller Black image processing unit Reset maintenance counter
Set the printer to recognize and use the PPDS data stream.
Set a value for the text size under which high frequency displays are used when printing font data.
For example, if the value is 24, all high frequency fonts of 24 points or fewer screens are used.
Adjust the toner density for printing documents.

Printer Menu Information 29
Set the amount of sound that the printer produces.
Access the control panel menus.
Set the printer to work in a special mode, where it tries to provide as much functionality as possible despite known problems. If this option is turned on and the duplex engine does not work, for example, the printer will print one-sidedly even if double-sided printing is enabled for that task.
Clear user-defined strings for default or alternative custom messages.
Clear messages that are installed externally.
Clear all remotely installed messages
Show when the printer memory was last cleaned up.
Clear all settings and applications stored in the printer's memory.
Clean all data in non-volatile memory
Clear all the settings and applications that are stored on your printer and network.
Clear all printer and network settings
Feature tag Displays the printer serial number.
Printer Location Identifys the printer's location. The maximum length is 63 characters.
Contact Adjust the printer name. The maximum length is 63 characters.

Printer Menu Information 30
This will determine whether to print on one side or two sides of the paper.
Determine which side of the paper (long side or short side) is bound when printing double-sided.
Long side* Short side
Blank pages prints that are included in a printing job.
This will stack the pages of a print job in order if you print multiple copies of the task.
Uit [1,1,1,2,2,2] Aan [1,2,1,2,1,2]*
Insert empty separation sheets while printing.
None* Between copies Between tasks Between pages
Specify the source of paper for the separation sheet.
Tray [x] (1*) U-loader
Print multiple page binders on one side of the paper.
Out* 2 pages per side 3 pages per silk 4 pages per page 6 pages per face 9 pages per sides 12 pages per lace 16 pages per edge
Pages by side - sorting
Specify multiple page positioning when using Pages per side.
Horizontal* Reverse horizon. Vertical Conversely Vertical
Pages per side - Print Mode
Specify the print position of a multi-page document when using Pages per side.

Printer Menu Information 31
Pages per side - border
Print a border around each page when using Pages per side.
1-9999 (1*) This gives the number of copies for individual printing tasks.
Set the printable area of a sheet of paper.
Configure the printer language.
Set the printer to process temporary downloads when receiving a task that requires more memory than is available.
Print order for everything
Specify the order in which held and confidential tasks are printed when All Prints is selected.
Alphabetical* Oldest task as first Newest task
Set the resolution for text and images to the printed output.
600 dpi* Image quality 1200 Image quality 2400 1200 dpi 300 dpi

Printer Menu Information 32
Allow more pixels to be printed as cluster in order to improve text and images.
Off* Fonts Horizontal Vertical Both directions
1.1.310 (8*) Determining the brightness or darkness of images with text.
Improve printing, so that these smoother lines have sharper edges.
Adjust the brightness of the printed output.
‑6 tot 6 (0*)
0 to 5 (0*) Adjust the contrast of the printed output.
Adjust the contrast enhancement applied to images.
Set the printer to log in for the received print jobs.
Specify how often the printer makes a log.
Action log file at end of frequency
Set how the printer reacts at the end of the specified frequency.
None* E-mail current log file Email and delete Current log file Place and remove Current logfile
Log level almost full
Specify how large the log file can be before running action at Actionlog at almost full.

Printer Menu Information 33
Action log at almost full
Specify how the printer reacts when hard drive is almost full.
None* E-mail Current Log File Email and Remove Oldest Log File emails & Delete Place Current Log file Post and Remove Newest Log file Place and delete Past Log File Delete Oldest log file Delete All except current log file Remove all log files
Specify how the printer reacts when maximum disk usage is reached (100 MB).
None* E-mail and delete current log file E-Mailing and Remove Oldest log file Post and Delete Current log file Place and remove oldest logfile Delete existing log file Delete all except present log file Remove all log files
URL to log Verst. Specify where the logs are placed.
Email address for sending log files Enter the email address to which the task admin log files are sent.
Prefix logfile Specify the prefix for log name.
Error pages after
Print a test page with error information, including XML markup errors.
1-30 (2*) Set the minimum width of a linepiece to a task that is printed in 1200 dpi.

Printer Menu Information 34
Scale page contents so that it fits the selected paper size.
Specify whether to print annotations in the PDF file.
Print a test page with the PostScript error.
1-30 (2*) Set the minimum width of a linepiece to a task that is printed in 1200 dpi.
Disable the SysStart file.
Set how long the printer waits for further data before a print job is cancelled.
Choose the source that contains the default font selection.
Select a font from the given font source.
[List with available letter types]
Display the symbol set for each font name.
[List with available symbol sets]

Printer Menu Information 35
0.08-100 (10*) Set font pitch for scalable fixed character size fonts (monospaced).
Set the print mode of text and images on the page.
1.1.7255 Specify the number of text lines for each page printed via PCL® data stream.
1-30 (2*) Set the first minimum line width.
This sets the width of the logical page for A4 paper.
198 mm* 203 mm
Automatic HR after NR
Set the printer to perform a hard return after command for a new line.
Automatic NR after HR
The printer executes a new line after the command for a hard return.

Printer Menu Information 36
Tray No modify
This configures the printer to work with printing control programs or applications that other source settings have for the paper source.
Out* No 0-201 Value tray [x]
Out* No 0-201 Value handm. import
Off* No 0-201 Value envelope (handm.)
Tray No modify
Display the factory setting for each paper source.
Tray No modify
Reset all drawer assignments to factory values.
Set the printer to stop a job after it is inactive for a certain time (in seconds).
Set the font to use for HTML documents.
[List with fonts] (Times*)
1-255 (12*) Set the font size to be used for HTML documents.
1.0.3400% (100*) Scale HTML documents.
Set the print mode for HTML documents.
8.0.7255 mm (19*) Set the page margin for HTML documents.

Information about the printer menus 37
Print background information or images for HTML documents.
Autom. customize
Select the best available options for paper size and image print mode.
Turn two-colored black and white images.
Adjust the image so it fits into the printable area.
Most similar* Anchor Left top corner Center anchor Hgte/width matching Adjust height Adjust width
Set the print mode of text and images on the page.
Standing* Facing facing facing facing standing in reverse
Set the paper source for all printing tasks.
Loader [x] (1*) U-loader Manual paper input Manual envelope entry

Printer Menu Information 38
Specify the paper size or type of paper loaded into each source.
Loader [x] U-loader Manual paper input Manual envelope entry
Set the printer to replace a specified paper format when the desired size is not placed in the paper source.
From Statement/A5 Letter/A4 Everything in list*
Set when the printer enters paper that is placed in multifunctional input.
Universal Setting
Specify the units of measurement for Universal paper.
Set the width of standing Universal paper.
Set the height of standing Universal paper.

Information about the printer menus 39
Set the printer to enter it from the short side or long side.
Short side* Long side
Normal Paper Cardboard Transparency Circuit Labels Linking Envelope Raw Envelopes Headlight Preprinted Coloured Paper Light Heavy Raw/cotton Customized [x]
Specify the texture and weight of the paper placed.
Choose from the following settings:
Smooth Normal* Raw Paper Weight
Specify how a network is connected.
Network status Displays the connection status of the printer network.
Display network status on printer
Displays network status on screen.
Speed, duplex Displays the speed of currently active network card.
IPv4 Displays the IPv4 address.
All IPv6 Addresses Displays all IPv6 addresses.

Printer Menu Information 40
Restore Print Server Reset all active network connections to the printer.
This allows you to set up after how much time a network print job is canceled.
Off On* (90 seconds)
Print a front page.
Configuration via the mobile app Configure the Wi-Fi connection using Lexmark Mobile Assistant.
Set up on the printer's control panel
Configure the Wi-Fi connection via the control panel.
Choose Network Add Wi-Fi network
Infrastructure Security mode for wireless
Disabled* WEP WPA2/WPA - Personal WPA2 - Personal 802.1x - RADIUS
Wi‑Fi Protected Setup
Set up a Wi-Fi network and enable network security.
WPS autom. detect
Off On* Start a pushbutton method Starting with PIN
Specify network mode.

Printer Menu Information 41
Wi‑Enable Fi Direct
Set Wi-Fi Direct devices to connect directly to the printer.
Please specify the standard Wi-Fi network usage for the wireless network.
802.11b/g/n (2.4 GHz) * 802.11.a/b/w/n/ac (2.4GHHH) 802.10a/n-ac (5 GHz)
Set the security mode to connect the printer to Wi-Fi devices.
Disabled* WEP WPA2/WPA - Personal WPA2-Personal 802.1x - RADIUS
Set the type Wireless Encryption Protocol (WEP) for the printer.
Set WEP Key Please enter a WEP password for secure Wi-Fi connection.
Set Wi-Fi connection via Wi-fi Protected Access (WPA).
Set pre-share key Set the password for a secure Wi-Fi connection.
Set up Wi-Fi connection via WPA2.
802.1x Encoding Mode WPA+ WPA2*
Set Wi-Fi connection via the standard 802.1x.
Enable and configure the IPv4 settings in the printer.
To* Set from Static IP Addresses

Printer Menu Information 42
Enable and configure the IPv6 settings in the printer.
Enable * From DHCPv6
On Out* Stateless Address Autoconfiguration
To* From DNS server address Manually assigned IPv6 address Manual allocated IPv6-router Address prefix All IPv4 addresses All IP v6 routers
Show the network addresses.
Set the printer to automatically switch to PCL emulation if required by a printing job, regardless of default printer language.
Set the printer to automatically switch to PS emulation if required by a printing job, regardless of default printer language.
Temporaryly save print jobs to the printer's hard drive before printing.
Set printer to process binary PostScript printing tasks for Macintosh.

Printer Menu Information 43
Display the speed of an active network adapter.
Enable Dynamic Host Configuration Protocol (DHCP).
Enter the static IP address of your printer.
Configure IPv6 on the printer.
Run DHCPv6 in an IPv6 network.
Set the network adapter to accept IPv6 addresses automatically configured by a router.
DNS Address Specify the DNS server address, IP address and router for the IPv6 network.
All IPv6 Addresses Display all IP and router addresses used in an IPv6 network.
Display the printer's MAC (Media Access Control) addresses: Locally Administrator- tered Address (LAA) and Universally Administered Address.
Set the printer to automatically switch to PCL emulation if required by a printing job, regardless of default printer language.

Printer Menu Information 44
Set the printer to automatically switch to PS emulation if required by a printing job, regardless of default printer language.
Set printer to process binary PostScript printing tasks for Macintosh.
This limits power consumption if the printer does not receive data from the Ethernet network.
Set host name Set the current TCP/IP hostname.
Domain Name Set the domain name.
Allow DHCP/BOOTP to update the NTP server
Allow DHCP and BOOTP clients to update the printer's NTP settings.
Configuration-free program name Specify a service name for the configurationless network.
Autom. Enable IP
Automatically assign an IP address.
DNS Server Address Specify the current DNS server address (Domain Name System).
Backup DNS address Specify the backup DNS server addresses.
Domain search order Specify a list of domain names to search for the printer and sources that are located in different domains on the network.
Update the dynamic DNS settings.

Printer Menu Information 45
Update multicast DNS settings.
WINS Address Specify a server address for Windows Internet Name Service (WINS).
Allow the BOOTP to assign an IP address of the printer.
Limited Server List Specify an IP address for the TCP connections.
Limited Server List Options
Specify how IP addresses in the list can access printer functions.
Block all ports* Block only prints Only print and block HTTP
1-65535 (9100*) Specify a raw port number for printers connected to a network.
Maximum speed of outgoing traffic
Set the printer to maximum transfer speed.
Enable the SSLv2 protocol.
Enable the SSLv3 protocol.
Enable TLSv1.0
Enable the TLSv1.0 protocol.
Enable TLSv1.1
Enable the TLSv1.1 protocol.

Printer Menu Information 46
SSL Encoding List Specify cipher algorithms for use in SSL or TLS bin-things.
SNMP versions 1 and 2c
Configure SNMP versions 1 and 2c (Simple Network Management Protocol) for installing printer drivers and applications.
Allow off* Setup SNMP
Enable Out* PPM MIB
Configure SNMP version 3 for installing and updating the printerbe- security.
Off To* Set Read/Write References
User Name Password Set Read-only References
User Name (Username) Password Verification hash
MD5 SHA1* Minimum level of verification
No verification, no privacy Verification, no Privacy Verification, privacy* Privacy algorithm

Printer Menu Information 47
Enable Internet Protocol Security (IPSec).
Specify the IPsec base configuration.
IPSec Device Certificate Specify an IPsec certificate.
Verified connections with pre-shared key
Configure the verified connections of the printer.
Verified links of certificate
Allow the printer to access networks that require verification.

Printer Menu Information 48
0.77.65535 seconds (90*) Set the time-out value to stop the LPD server (Line Printer Daemon) from waiting infinitely for blocked or invalid printing tasks.
Print a front page for all LPD print jobs.
Print an info page for all LPD print jobs.
Enable LPD line rundown conversion.
Go to the Embedded Web Server to monitor and manage the printer.
Configure the HTTPS settings (HyperText Transfer Protocol Secure).
Send files via FTP.
1-65535 (80*) Configure the settings for the HTTP and FTP server.
1-299 (30*) Specify the time in seconds before the server connection is terminated.
Nwe pog. for HTTP/FTP requests
1-299 (3*) Set the number of new attempts to connect to the HTTP/FTP server.

Printer Menu Information 49
Set the printer to switch to PCL emulation if required by a print job on the USB port, regardless of default printer language.
Set the printer to switch to PS emulation if required by a print job on the USB port, regardless of default printer language.
Set printer to process binary PostScript printing tasks for Macintosh.
Enable the default USB port.
Print from ThinPrint.
4000-4999 (4000*) Set the port number for ThinPrint server.
Specify the speed at which data is transmitted in a ThinPrint environment.
0-64000 (0*) Set the data transfer package size.
Register the printer on Google Cloud Print server.

Printer Menu Information 50
Print directly from your Google account.
Provide the registered user and other users on the same subnet to send locally tasks to the printer.
Check the authenticity of peer certificate to connect with your Google account.
Set the printer to process PDF files as an image for faster printing.
Always print as an image.
SSID Specify the service set identifier (SSID) of the Wi-Fi network.
Set pre-share key Set the pre-shared key (PSK) for verifying and validating users on a Wi-Fi connection.
Show PSK on Settings Page
Show the PSK on the network settings page.
Group owner IP address Specify the group owner's IP address.
Automatically accept requests to connect to the network.
Page Menu Settings Print a report with printer preferences, settings and configurations.

Printer Menu Information 51
Device Data Print a report with information about the printer.
Device statistics Print a report on printer usage and supply status.
Profile List Print a list of profiles stored on the printer.
Assets report Print a report with the serial number and model name of the printer.
Print examples and information about the fonts available in each printer language.
Pag. Network in-stell.
Print a page with the network settings and wireless network confi-gured on the printer.
Test page Print sample pages to identify and correct defects in the print quality.
1 Browse the control panel to:
2 Select Page with menu settings and then press .

Find the security slot
The printer has a locking function. At the specified location, confirm a security lock compatible with most laptops to lock the printer in place.

To erase volatile memory or buffered data, you need to disable the printer.
To erase non-volatile memory or individual settings, device and network settings and security settings as well as embedded solutions, do the following:
1 Browse the control panel to:
> Device > > Maintenance > > Clear Old Device >
2 Select Clean up all information about non-volatile memory and then press .
3 Select Continue and then press to start the task.
4 Follow the instructions on the display.
Secure printer 52

1 Browse the control panel to:
> Device > > Reset Factory Settings > > Restore Settings >
2 Select Restore All Settings and then press .
3 Browse to start the process to:
RECOVER > > Start >
See 'Clear Printer Memory' on page 52 for a more extensive method of restoring factory settings.
The printer uses standard RAM (Random Access Memory) to buffer user data during simple printing and copying tasks.
The printer may use two types of non-volatile memory: EEPROM and NAND (flash-remember). Both types are used for the storage of operating system, printer settings, network information, scanner and bookmarking settings and embedded solutions.
Hard drive In some printers a hard disk may be installed. The printer's hard drive is designed for printer-specific functions. With the hard disk, printer can store buffered user data for complex printing tasks and form and font data.
In the following cases, you must delete the contents of your printer memory:

1 Browse the control panel to:
> Network/Ports > > Wireless > > Setup on the printer control panel >
2 Follow the instructions on the display.
1 Depending on your mobile device, you download the Lexmark Mobile Assistant application from Google PlayTM store or App Store online store.
2 Browse the control panel to:
> Network/Ports > > Wireless > > Configuration via mobile app > > Continue for
3 Start the application from your mobile device and then accept the terms of use.
4 Granting permissions.
5 Tap Start Wi-Fi Configuration and select the printer.
6 Select a Wi-Fi network and then enter your login data.
7 Tap Complete Wi-Fi Configuration.
Check the following before you start:
Maintaining printer 54 · printer ID >

1 Browse the control panel to:
> Network/Ports > > Wireless >
2 Select Wi-Fi Protected Setup and then press .
3 Select Start a push-button method and then press .
4 Follow the instructions on the display.
1 Browse the control panel to:
> Network/Ports > > Wireless >
2 Select Wi-Fi Protected Setup > > Start PIN method > .
3 Copy the eight-digit WPS PIN.
4 Open a web browser and type the IP address of the access point in the address bar.
5 Open the WPS settings. For more information, please refer to the documentation provided at the access point.
6 Enter the eight-digit PIN and save changes.
1 Browse the printer's control panel to:
> Network/Ports > > Network Overview > > Active adapter > > Standard network
2 Follow the instructions on the display.
Maintaining printer 55 · >

NOTE: DANGER OF ELECTRIC SHOCKS: To avoid the risk of electric shocks, pull the power cord plug out and unplug all cables connected to the printer before cleaning the outside of the printer.
1 Turn off the printer and pull the plug on the power cord of the printer from the socket.
2 Remove all the paper from the standard tray and multifunctional input.
3 Clean the printer with a soft brush or vacuum cleaner to remove dust, ink ribbon and pieces of paper in and around the printer.
4 Wipe the outside of the printer with a damp, soft, lint-free cloth.
5 Connect the power cord plug to the socket and turn on the printer.
PLEASE NOTE: RISK OF INJURY: To avoid the risk of electric shocks or fire, you need to connect the power cord directly to a grounded outlet close to the product and which is easily accessible.
If you want to order parts and supplies in the US, call Lexmark on 1-800-539-6275 for information about authorized dealers of Lexmarket supplies around you. In other countries or regions you will go to www.lexmark.com, or contact the store where you bought the printer.
Browse the control panel to:
> Status/Supplies > > Supplies >
Maintaining printer 56

Your Lexmark printer works best with original Lex Mark parts and supplies. When you use supplies or parts from other manufacturers, this may have a negative impact on the performance, reliability or lifetime of the printer and image processing components of the device. It may also affect your guarantee. Damage caused by the use of parts or supplies from other manufacturers is not covered by the warranty. All life indicators are designed to function with Lexmark components and supplies. If you use parts or supplies from other manufacturers, this may lead to unpredictable results. The use of image processing components longer than the intended life span can damage your Lexmark printer or its parts.
Rest of Europe, the
Return pro-gram tonercar tridge with high efficiency
Return pro-gram tonercar tridge with extra high efficiency1
Business return- program toner- cartridge with high efficiency2
Business return- program toner- cartridge with extra high efficiency1, 2
1 Only supported in the Lexmark MS421 printer model.
2 Only available for contract-managed printers. Please contact your Lexmark representative or system administrator for more information.





Extremely low print coverage over longer periods can cause parts of the image processing unit to break before the toner runs out.
Printer maintenance 58

Image processing unit from return program 56F0Z00
Image processing unit from business return program* 56F0Z0E
* This image processing unit is only available for contract-managed printers. Please contact your Lexmark representative or system administrator for more information.
1 Open a web browser and type the printer IP address in the address bar.
2 Click on Institutions > Device > Notifications.
3 In the Supply menu, click on Custom supply notifications.
4 Select a notification for each component.
5 Apply the changes.
1 Open valve A.

Maintaining printer 59 · Item Article number · Normal image processing unit 56F0ZA0

2 Remove the used toner cartridge.

3 Remove the new toner cartridge from the package and shake it three times to distribute the toner.

4 Place new toner cartridge

5 Close valve A.
Printer maintenance 60

1 Open valve A.
2 Remove the toner cartridge.

3 Remove the used image processing unit.

Printer maintenance 61

4 Remove the new image processing unit from the packaging and shake it three times to distribute the toner.


5 Place the new image processing unit.

6 Place the toner cartridge.
Maintaining printer 62

7 Close valve A.
1 Turn off the printer.
2 Pull the plug from the power cord and remove the power cable from the printer.
3 Remove the drawer.
Printer maintenance 63

4 Remove the used packing straps piece by piece.

5 Remove the new packing tapes from the package.
Printer maintenance 64

6 Place the new packing tapes.

7 Put the drawer back.
8 Connect the power cord to the printer and then connect it to an outlet.
PLEASE NOTE: RISK OF INJURY: Connect the power cord to a grounded outlet close to the product and easily accessible to prevent fire or electric shocks.
9 Turn on the printer.
1 Turn off the printer.
2 Pull the plug from the power cord and remove the power cable from the printer.
3 Remove the optional drawer.
PLEASE NOTE: RISK OF INJURY: If the printer weighs more than 18 kg (40 lb), it must be moved by two or more trained staff.
Maintaining printer 65


4 Remove the housing and then turn over the paper holder.

Maintaining printer 66

5 Remove the used grab roller mechanism.

6 Remove the new grab roller mechanism from the package.
Printer maintenance 67

7 Place the new grab roller mechanism.

8 Turn the paper holder and then place the housing.
Maintaining printer 68

9 Adjust the printer with the optional tray and lower the printer until it clicks.

10 Connect the power cord to the printer and then connect it to an outlet.
PLEASE NOTE: RISK OF INJURY: Connect the power cord to a grounded outlet close to the product and easily accessible to prevent fire or electric shocks.
11 Turn on the printer.
PLEASE NOTE: RISK OF INJURY: If the printer weighs more than 18 kg (40 lb), it must be moved by two or more trained staff.
PLEASE NOTE: RISK OF INJURY: Use only the power cord supplied with this product or a replacement component approved by the manufacturer to prevent fire or electric shocks.
PLEASE NOTE: RISK OF INJURY: Follow these guidelines when moving the printer to prevent injury or damage of your printer:
Printer maintenance 69

Transport the printer.
For shipping instructions, go to http://support.lexmark.com or contact customer support.
1 Browse the control panel to:
> Device > > Energy management > > Ecomode >
2 Pick an institution.
1 Browse the control panel to:
> Device > > Energy management > > Time-outs > > Sleep Mode >
2 Enter the amount of time that should pass before the printer switches to sleep mode.
1 Browse the control panel to:
> Device > > Energy management > > Time-outs > > Sleep timeout >
2 After how much time the printer switches to slumber mode, select.
Maintaining printer 70 · Eco‑mode

1 Browse the control panel to:
> Device > > Preferences >
2 Select Brightness of the screen and then press .
3 Adjust the setting and press .
You return Lexmark products for reuse as follows:
1 Go www.lexmark.com/recycle.
2 Select the product you want to recycle.
Lexmark is constantly aiming to minimise packaging material. Less packaging helps to transport Lexmark printers in the most efficient and environmentally friendly way, and reduces the need for waste. This results in less greenhouse gas emissions and savings of energy and natural resources. Lexmark offers recycling of packaging material in some countries and regions. For more information, please visit www.lexmark.com/recycle and then choose your country or region. Information on available recycling programmes of packaging material is included in the product recycling information.
Lexmark boxes are 100% recyclable when facilities for recycling cardboard are available. Such facilities may not exist in your area.
Printer maintenance 71

The Styrofoam used in Lexmark packaging material is recyclable when facilities are available. Such facilities may not exist in your area.
When you return a cartridge to Lexmark, use the box in which the cartridge was originally delivered. This box is recycled by Lexmark.
With the Lexmark Cartridge Collection Program, you can return used cartridges to Lex Mark for free for reuse or recycling. One hundred percent of empty cartridges returned to Lexmark are reused or processed for recycling. The boxes used to return the cartridges are also recycled.
Lexmark cartridges can be returned for reuse or recycling as follows:
1 Go www.lexmark.com/recycle.
2 Select the product you want to recycle.
Maintaining printer 72

Preventing paper failures
Paper is correctly placed Paper is not correctly placed



Resolving paper failures 73




1 Remove the drawer.

2 Open valve A.

3 Remove the toner cartridge.

Resolve paper failures 75

4 Remove the image processing unit.


5 Remove the stuck paper.
NOTE: HOT SURFACE: The inside of the printer can be hot. To avoid injury, you should cool a hot surface before touching it.
Resolve paper failures 76


6 Place the image processing unit.

7 Place the toner cartridge.
Resolve paper failures 77


8 Close valve A.
9 Put the drawer back.
1 Open the tailgate.
NOTE: HOT SURFACE: The inside of the printer can be hot. To avoid injury, you should cool a hot surface before touching it.

2 Remove the stuck paper.
Paper failures remedy 78


3 Close the tailgate.
Remove the stuck paper.

Resolve paper failures 79

1 Remove the drawer.
2 Remove the stuck paper.

3 Place the drawer.
Resolve paper failures 80

1 Remove the drawer.
2 Remove the stuck paper.

3 Put the drawer back.
1 Remove the paper from multifunctional input.
2 Remove the stuck paper.
Resolving Paper Failures 81


3 Bend the paper, fan it out and align the edges before inserting it into the printer.

4 Reload paper and then adjust the paper guide.

Resolve paper failures 82

Network connection problems
Go to step 2. Turn on the printer.
Check that the printer is enabled.
- Is the printer enabled?
Go to step 3. Type the correct IP address of the printer in the address bar.
Make sure the printer's IP address is correct.
Display the printer's IP address:
Is the printer's IP address correct?
Go to step 4. Install a under-supported browser.
Check if you are using a supported browser:
Is your browser supported?
Go to step 5. Contact your administrator.
Check that the network connection is active.
Is the network connection active?
Go to step 6. Fix the cable connection.
Make sure that the cable connections to the printer and print server are securely attached. Please refer to the documentation provided with the printer for more information.
- Are the cables secure?

Go to step 7. Contact your administrator.
Check that the web proxy servers are disabled.
Have the web proxy servers been disabled?
The problem is solved.
Contact Customer support.
Get access to the Embedded Web Server.
Is the Embedded Web Server being opened?
1 Browse the control panel to:
> Reports > > Network >
2 Select Network Settings Page and then press
3 Check the first part of the page with network settings to see if Status indicates that the printer is connected.
If Status indicates that the printer is not connected, it may be that the LAN connection point is not active or that the network cable is not plugged in or not working properly. Contact your administrator for support.
You can solve this problem by buying a cartridge with the region that matches the printer region, or buy a universal cartridge.
Universal or undefined region 0
North America (United States, Canada) 1
European Economic Area, Western Europe, Scandinavian countries, Switzerland 2
Asia and the Pacific 3
Other European countries, Middle East, Africa 5

The printer has detected that a supply or part of a brand other than Lexmark is installed in the printer.
Your Lexmark printer works best with original Lex Mark supplies and parts. When you use supplies or parts from other manufacturers, this may have a negative impact on the performance, reliability or lifetime of the printer and image processing components of the device.
All life indicators are designed to function with the supplies and parts Lexmark. If you use supplies or parts from other manufacturers, this may lead to unpredictable results. The use of image processing components longer than the intended lifetime can damage your Lexmark printer or its parts.
If you want to accept these risks and continue using non-original supplies or
parts in your printer, then keep X and pressed on the control panel 15 seconds at a time.
If you do not want to accept these risks, remove the supply or part of other manufacturers from your printer and replace it with an original supply or component of Lexmark. See 'Use Official Lexmark parts and supplies' on page 57 for more information.
If you: X and press 15 seconds at the same time, and still cannot print the printer, you need to reset the user of the supplies.
1 Browse the control panel to:
> Device > > Maintenance > > Configuration Menu > > Consumption and counters of
2 Select the component or supply you want to set up and then select Start > .
3 Read the warning message and then select Continue > .
4 Hold X and press 15 seconds simultaneously to delete the message.
Solution of problems 85 · supplies >

Go to step 2. The problem is solved.
a Use an envelope that is stored in a dry environment.
Is the envelope taped up while printing?
Contact Customer support.
The problem is solved.
a Make sure the paper type is set to Envelope.
Browse the control panel to:
> Paper > > Load Configuration > > Paper Size/-
species > b Send the print job.
Is the envelope taped up while printing?
The problem is solved.
Go to step 2.
a Browse the control panel to:
> Print > > Classification >
b Select Sort and then press .
c Enable Sort on On and then press . d Print the document.
Is the document sorted correctly?
The problem is solved.
Go to step 3.
a Open the dialog from the document you want to print
Print and select Sort. b Print the document.
Is the document sorted correctly?

The problem is solved.
Contact Customer support.
a Reduce the number of pages to print. b Print the document.
Are the pages sorted correctly?
The problem is solved.
Go to step 2.
a Check that the loading paper of the same size and the same
contain species. b Check that the paper guides are correctly placed.
c Print the document.
Are the drawers properly coupled?
The problem is solved.
Go to step 3.
a Browse the control panel to:
> Paper > > Load Configuration > > Paper Size/-
species > b Set the paper size and type of paper in the
Linked drawers. c Print the document.
Are the drawers properly coupled?
The problem is solved.
Contact Customer support.
a Make sure that Lade link is set to Automatic. See
Link Loading on page 17 for more information. b Print the document.
Are the drawers properly coupled?

Go to step 2. The problem is solved.
a Remove the drawer. b Check that the paper is correctly placed.
Do paper failures keep on happening regularly?
Go to step 3. The problem is solved.
a Browse the control panel to:
> Paper > > Load Configuration > > Paper Size/-
species > b Set the correct paper size and type of paper.
c Print the document.
Do paper failures keep on happening regularly?
Contact Customer support.
The problem is solved.
a Replace the paper. Use paper from a new suit.
Do paper failures keep on happening regularly?
1 Browse the control panel to:
The problem is solved.
Contact Customer support.
> Messages > 2 Select from the printer repair menu after malfunction To or Auto and pressure
then on .
- Are the pages that have been blocked printed?

Empty or white pages

print quality. For printer models without touchscreen, press to navigate through the settings.
Go to step 2. The problem is solved.
a Check if the printer has an original and supported Lexmark-
toner cartridge used.
Is the printer printing empty or white pages?
Solution problems 89 · Action Yes No · Step 1

Go to step 3. The problem is solved.
a Remove any remaining packaging from the
Image processing unit.
1 Remove the toner cartridge and then remove the image unit.
Is the printer printing empty or white pages?
Step 3. Check the toner cartridge status and replace it if necessary.
Contact Customer support.
The problem is solved.
a Browse the control panel to:
Status/Supplies > Supplies b Print the document.
Is the printer printing empty or white pages?

print quality. For printer models without touchscreen, press to navigate through the settings.
Troubleshooting 90 · Action Yes No · Step 2

Go to step 2. The problem is solved.
a Check if the printer has an original and supported Lexmark-
toner cartridge used.
Is the print dark?
Go to step 3. The problem is solved.
a Disable the printer and then switch off the printer
About 10 seconds back in. b Lower the set value for toner intensity. Browse on the
Control panel to: Institutions > Print > Quality c Print the document.
Is the print dark?
Go to step 4. The problem is solved.
a Specify the paper type in Print Preferences or
in the Print dialog, depending on your operating system.
Is the print dark?
Go to step 5. Go to step 6.
Check whether the paper has structure or rough finish.
Do you print on paper with structure or rough finish?
Go to step 6. The problem is solved.
a Replace paper with structure by normal paper. b Print the document.
Is the print dark?
Go to step 7. The problem is solved.
a Replace the paper. Use paper from a new suit.
Is the print dark?

Go to step 8. The problem is solved.
a Remove the image processing unit and then place it
Again.
Is the print dark?
Contact Customer support.
The problem is solved.
a Replace the image processing unit. b Print the document.
Is the print dark?

print quality. For printer models without touchscreen, press to navigate through the settings.
Go to step 2. The problem is solved.
a Check if the printer has an original and supported Lexmark-
toner cartridge used.
Are accurate details not printed correctly?

Contact Customer support.
The problem is solved.
a Adjust the print quality settings.
1 Browse the control panel to: Institutions > Print > Quality > Pixel reinforcement > Fonts 2 Set toner intensity to 7. Browse the control panel to: Institutions > Print > Quality b Print the document.
Are accurate details not printed correctly?

print quality. For printer models without touchscreen, press to navigate through the settings.
Go to step 2. The problem is solved.
a Check if the printer has an original and supported Lexmark-
toner cartridge used.
Is the paper folded or wrinkled?
Go to step 3. The problem is solved.
a Replace the paper. Use paper from a new suit.
Is the paper folded or wrinkled?

Contact Customer support.
The problem is solved.
a Specify the paper type in Print Preferences or
in the Print dialog, depending on your operating system.
Is the paper folded or wrinkled?

print quality. For printer models without touchscreen, press to navigate through the settings.
Go to step 2. The problem is solved.
a Turn off the printer, wait about 10 seconds and switch on
printer back in. b Adjust toner intensity.
Browse the control panel to:
Institutions > Print > Quality c Print the document.
Do printing contain a grey background?
Go to step 3. The problem is solved.
a Check if the printer has an original and supported Lexmark-
toner cartridge used.
Do printing contain a grey background?

Go to step 4. The problem is solved.
a Specify the paper type in Print Preferences or
in the Print dialog, depending on your operating system.
Do printing contain a grey background?
Step 4. Check the toner cartridge status and replace it if necessary.
Go to step 5. The problem is solved.
a Browse the control panel to:
Status/Supplies > Supplies b Print the document.
Do printing contain a grey background?
Go to step 6. The problem is solved.
a Remove the image processing unit.
Image processing unit.

Do printing contain a grey background?
Contact Customer support.
The problem is solved.
a Replace the image processing unit. b Print the document.
Do printing contain a grey background?


print quality. For printer models without touchscreen, press to navigate through the settings.
a Check if the printer has an original and supported Lexmark-
Contact Customer support.
The problem is solved.
toner cartridge used.
Do printing contain horizontal light stripes?

The problem is solved.
Go to step 2.
a Move the guides into the right position for the relevant
paper format. b Print the document.
Are the margins correct?

The problem is solved.
Contact Customer support.
a Specify the paper format via the Preference Settings dialog
print or print dialog depending on the operating system.
Are the margins correct?

print quality. For printer models without touchscreen, press to navigate through the settings.
Go to step 2. The problem is solved.
a Check if the printer has an original and supported Lexmark-
toner cartridge used.
Is the print light?
Go to step 3. The problem is solved.
a Disable the printer and then switch off the printer
About 10 seconds back in. b Adjust toner intensity. Browse the control panel to:
Institutions > Print > Quality c Print the document.
Is the print light?

Go to step 4. The problem is solved.
a Specify the paper type in Print Preferences or
in the Print dialog, depending on your operating system.
Is the print light?
Step 4. Check the toner cartridge status and replace it if necessary.
Go to step 5. The problem is solved.
a Browse the control panel to:
Status/Supplies > Supplies b Print the document.
Is the print light?
Troubleshooting 98 · Action Yes No · Step 3.

Go to step 6. The problem is solved.
a Remove the toner cartridge and then remove the image processing device
Unit.
The king unit is sitting, to check that it is pressed and returns to the place.
NOTE: HOT SURFACE: The inside of the printer can be hot. To avoid injury, you should cool a hot surface before touching it. c If the transfer role is not pressed and returned to its
The Commission has already made a number of proposals.
1 Pull up one end of the transfer roller and press it down until it clicks. 2 Repeat the step for the other end if necessary. d Shake the image processing unit so that toner becomes equal
divided and put it back. e Place the toner cartridge.
f Turn off the printer, wait about 10 seconds and switch on
printer back in. g Print the document.
Is the print light?
Go to step 7. The problem is solved.
a If the problem arises after installing a new one
Maintenance kit, then check that the transfer roller included in the kit is installed.
Is the print light?
Step 7. This allows you to check the status of the image processing unit. Browse the control panel to:
Go to step 8. Contact Customer support.
Is the image processing unit almost worn out?

Contact Customer support.
The problem is solved.
a Replace the image processing unit. b Print the document.
Is the print light?

print quality. For printer models without touchscreen, press to navigate through the settings.
Go to step 2. The problem is solved.
a Check if the printer has an original and supported Lexmark-
toner cartridge used.
Go to step 4. Go to step 3.
Check the printer for leakage of toners.
Isn't there a leak of toners in the printer?
Go to step 4. The problem is solved.
a Replace the toner cartridge. b Print the document.
Step 4. This allows you to check the status of the image processing unit. Browse the control panel to:
Go to step 5. Contact Customer support.
Is the image processing unit almost worn out?

Contact Customer support.
The problem is solved.
a Replace the image processing unit. b Print the document.

print quality. For printer models without touchscreen, press to navigate through the settings.
Go to step 2. The problem is solved.
a Check if the printer has an original and supported Lexmark-
toner cartridge used.
Is the paper curled over?
Go to step 3. The problem is solved.
a Slide the guides in the drawer to the right position for paper
In the drawer. b Print the document.
Is the paper curled over?

Go to step 4. The problem is solved.
a Specify the paper type and format settings in the dialog-
Preferred Print or Printing Settings window, depending on the operating system.
Is the paper curled over?
Go to step 5. The problem is solved.
a Remove the paper from the drawer and turn it around. b Print the document.
Is the paper curled over?
Go to step 6. The problem is solved.
a Replace the paper. Use paper from a new suit.
Is the paper curled over?
Contact Customer support.
The problem is solved.
a Check that the paper entered is supported.
Is the paper curled over?


print quality. For printer models without touchscreen, press to navigate through the settings.
Go to step 2. The problem is solved.
a Slide the guides in the drawer to the right position for paper
In the drawer. b Print the document.
Is the print oblique or crooked?
Go to step 3. The problem is solved.
a Check that the paper entered is supported.
Is the print oblique or crooked?
Contact Customer support.
The problem is solved.
a Check the dial in the input tray for damage and replace
This one if necessary. b Print the document.
Is the print oblique or crooked?

print quality. For printer models without touchscreen, press to navigate through the settings.

Step 1 Using the print quality test pages, you can check whether the distance between recurring failures is equal to one of the following:
Go to step 2. Note the distance and contact Customer support.
Does the distance between recurring failures correspond to any of the dimensions?
Contact Customer support.
The problem is solved.
a Replace the image processing unit. b Print the document.
Do printing contain repeated malfunctions?

print quality. For printer models without touchscreen, press to navigate through the settings.
Go to step 2. The problem is solved.
a Check if the printer has an original and supported Lexmark-
toner cartridge used.
Is the printer printing plain black pages?

Go to step 3. The problem is solved.
a Remove the image processing unit and then place it
Again.
Is the printer printing plain black pages?
Go to step 4. The problem is solved.
a Remove the image processing unit.
Image processing unit.
Is the printer printing plain black pages?
Contact Customer support.
Go to step 5.
Check the image processing unit for damage.
Isn't the image processing unit damaged?
Contact Customer support.
The problem is solved.
a Replace the image processing unit. b Print the document.
Is the printer printing plain black pages?


print quality. For printer models without touchscreen, press to navigate through the settings.
Go to step 2. The problem is solved.
a Check if the printer has an original and supported Lexmark-
toner cartridge used.
Are text or images cut off?
Go to step 3. The problem is solved.
a Remove the image processing unit and then place it
Again.
Are text or images cut off?

Go to step 4. The problem is solved.
a Remove the image processing unit.
Image processing unit.
Are text or images cut off?
Contact Customer support.
The problem is solved.
a Replace the image processing unit. b Print the document.
Are text or images cut off?

print quality. For printer models without touchscreen, press to navigate through the settings.

Go to step 2. The problem is solved.
a Check if the printer has an original and supported Lexmark-
toner cartridge used.
Easy to let go of the toner?
Contact Customer support.
The problem is solved.
a Specify the paper type in Print Preferences or
in the Print dialog, depending on your operating system.
Easy to let go of the toner?

print quality. For printer models without touchscreen, press to navigate through the settings.
Go to step 2. The problem is solved.
a Check if the printer has an original and supported Lexmark-
toner cartridge used.
Are prints still containing vertical dark stripes?

Go to step 3. The problem is solved.
a Remove the toner cartridge and then remove the image processing device
Unit.
c Print the document.
Are prints still containing vertical dark stripes?
Go to step 4. The problem is solved.
a Remove the image processing unit.
Image processing unit.
Are prints still containing vertical dark stripes?
Contact Customer support.
The problem is solved.
a Check if bright light enters the right side of the printer
and move the printer if necessary. b Print the document.
Are prints still containing vertical dark stripes?


print quality. For printer models without touchscreen, press to navigate through the settings.
Go to step 2. The problem is solved.
a Check if the printer has an original and supported Lexmark-
toner cartridge used.
Do vertical dark lines or stripes appear in prints?
Go to step 3. The problem is solved.
a Remove the image processing unit and install it
then again.
Do vertical dark lines or stripes appear in prints?
Contact Customer support.
The problem is solved.
a Replace the image processing unit. b Print the document.
Do vertical dark lines or stripes appear in prints?


print quality. For printer models without touchscreen, press to navigate through the settings.
Go to step 2. The problem is solved.
a Remove the image processing unit.
Image processing unit.
Do printing still contain vertical dark lines and missing images?
Contact Customer support.
The problem is solved.
a Check if the printer has an original and supported Lexmark-
toner cartridge used.
Do printing still contain vertical dark lines and missing images?


print quality. For printer models without touchscreen, press to navigate through the settings.
a Check if the printer has an original and supported Lexmark-
Contact Customer support.
The problem is solved.
toner cartridge used.
Are printing still containing vertical light stripes?

print quality. For printer models without touchscreen, press to navigate through the settings.
Go to step 2. The problem is solved.
a Check if the printer has an original and supported Lexmark-
toner cartridge used.
Do printing contain vertical white lines?

Contact Customer support.
The problem is solved.
a Specify the paper type in Print Preferences or
in the Print dialog, depending on your operating system.
Do printing contain vertical white lines?
Go to step 2. The problem is solved.
a Make sure the printer is not in Ecomode or Silent Mode
The first step is to reduce the risk of infection. b Print the document.
Is the printer still that slow with prints?
Go to step 3. The problem is solved.
a Specify the paper type in Print Preferences or
in the Print dialog, depending on your operating system.
Is the printer still that slow with prints?
Go to step 4. The problem is solved.
a Reduce the number of pages to print. b Print the document.
Is the printer still that slow with prints?
Go to step 5. The problem is solved.
a Connect the printer cable firmly to the printer and computer,
print server, option or other network device. b Print the document.
Is the printer still that slow with prints?

Go to step 6. The problem is solved.
a Set the print resolution to 600 dpi in the Quality menu on the
Control panel. b Print the document.
Is the printer still that slow with prints?
Go to step 7. The problem is solved.
a Check that the printer does not overheat.
Is the printer still that slow with prints?
Contact Customer support.
The problem is solved.
a Add more printer memory. b Print the document.
Is the printer still that slow with prints?
The problem is solved.
Go to step 2.
a Open the dialog from the document you want to print
Print and check that you have selected the correct printer. b Print the document.
Is the document printed?
The problem is solved.
Go to step 3.
a Check that the printer is enabled. b Fix the error messages that appear on the display.
c Print the document.
Is the document printed?
The problem is solved.
Go to step 4.
a Check that the gates are working and that the cables are securely mounted.
Locks on the computer and printer.
For more information, please refer to the printer installation documentation provided. b Print the document.
Is the document printed?

The problem is solved.
Go to step 5.
a Disable the printer and then switch off the printer
About 10 seconds back in. b Print the document.
Is the document printed?
The problem is solved.
Contact Customer support.
a Remove the printer driver and reinstall it. b Print the document.
Is the document printed?
Step 1 Check that the power cord is connected to the socket.
The problem is solved.
Go to step 2.
PLEASE NOTE: RISK OF INJURY: To avoid the risk of electric shocks or fire, you need to connect the power cord directly to a grounded outlet close to the product and which is easily accessible.
Turn on the switch or reset the circuit breaker.
Go to step 3.
Check that the power outlet is switched off using a switch or circuit breaker.
Is the power outlet switched off using a switch or circuit breaker?
Go to step 4. Turn on the printer.
Check that the printer is enabled.
- Is the printer enabled?
Step 4. Check that the printer is in sleep or slumber mode.
Press the On/Off button to turn on the printer.
Go to step 5.
Is the printer in sleep or slumber mode?
Step 5. Check that the cables with which the printer is connected are in correct ports.
Go to step 6. Place the cables in the correct ports.
Are the cables in the correct ports?

The problem is solved.
Go to step 7.
Turn off the printer, install hardware options and turn on the printer. Please refer to the documentation provided by the printer for more information.
The problem is solved.
Go to step 8.
Install the correct printer driver.
The problem is solved.
Contact Customer support.
Turn off the printer and then turn on the printer after about 10 seconds.
1 Browse the control panel to:
> Print > > Quality >
2 Select Toner intensity and then press .
3 Adjust the setting and press .
Go to step 2. Place the right paper size and type of paper.
a Check that you print on the right paper. b Print the document.
Is the document printed on the right paper?

The problem is solved.
Go to step 3.
a Specify the paper type and format settings in the dialog-
Preferred Print or Printing Settings window, depending on the operating system.
> Paper > > Load Configuration > > Paper Size/-
species > b Make sure the settings match the paper that is
Placed. c Print the document.
Is the document printed on the right paper?
The problem is solved.
Contact Customer support.
a Check that the drawers are connected.
See 'Link Loading' on page 17 for more information. b Print the document.
Is the document printed from the correct drawer?
Before contacting customer support, make sure you have the following information:
Go http://support.lexmark.com for support by email or via chat, or browse the library of manuals, supporting documentation, drivers and other downloads.
Technical support via the phone is also available. In the US or Canada, call 1-800-539-6275. Go to other countries or regions http://support.lexmark.com.

Upgrade and Migrate 118
Hardware
Access the controller card.
NOTE: DANGER OF ELECTRIC SHOCKS: If you want access to the controller card or install optional hardware or memory devices after setting up the printer, turn off the printer and pull the plug before continuing in order to avoid risk of electric shocks. If you have connected other devices to the printer, disable them and unplug the cables from the printer.
1 Turn off the printer.
2 Pull the plug from the power cord and remove the power cable from the printer.
3 Open the controller card access valve using a flat-head screwdriver.

Upgrade and migrate 119

4 Close the access valve.
5 Connect the power cord to the printer and then connect it to an outlet.
PLEASE NOTE: RISK OF INJURY: Connect the power cord to a grounded outlet close to the product and easily accessible to prevent fire or electric shocks.
6 Turn on the printer.
NOTE: DANGER OF ELECTRIC SHOCKS: If you want access to the controller card or install optional hardware or memory devices after setting up the printer, turn off the printer and pull the plug before continuing in order to avoid risk of electric shocks. If you have connected other devices to the printer, disable them and unplug the cables from the printer.
1 Turn off the printer.
2 Pull the plug from the power cord and remove the power cable from the printer.
3 Open the access valve of the controller card.

Upgrade and migrate 120
4 Remove the memory card from the package.
5 Place the memory card until it clicks.


6 Close the access valve to the controller card.
7 Connect the power cord to the printer and then connect it to an outlet.
PLEASE NOTE: RISK OF INJURY: Connect the power cord to a grounded outlet close to the product and easily accessible to prevent fire or electric shocks.
8 Turn on the printer.

Upgrade and migrate 121
NOTE: DANGER OF ELECTRIC SHOCKS: If you want access to the controller card or install optional hardware or memory devices after setting up the printer, turn off the printer and pull the plug before continuing in order to avoid risk of electric shocks. If you have connected other devices to the printer, disable them and unplug the cables from the printer.
1 Turn off the printer.
2 Pull the plug from the power cord and remove the power cable from the printer.
3 Open the access valve of the controller card.
4 Remove the optional card from the package.

Upgrade and migrate 122
5 Press the card firmly in place.

6 Close the access valve.
7 Connect the power cord to the printer and then connect it to an outlet.
PLEASE NOTE: RISK OF INJURY: Connect the power cord to a grounded outlet close to the product and easily accessible to prevent fire or electric shocks.
8 Turn on the printer.
NOTE: DANGER OF ELECTRIC SHOCKS: If you want access to the controller card or install optional hardware or memory devices after setting up the printer, turn off the printer and pull the plug before continuing in order to avoid risk of electric shocks. If you have connected other devices to the printer, disable them and unplug the cables from the printer.
1 Turn off the printer.
2 Pull the plug from the power cord and remove the power cable from the printer.

Upgrade and migrate 123
3 Unpack the optional tray and remove all packaging material.
4 Adjust the printer with the optional tray and lower the printer until it clicks.
PLEASE NOTE: RISK OF INJURY: If the printer weighs more than 18 kg (40 lb), it must be moved by two or more trained staff.
5 Connect the power cord to the printer and then connect it to an outlet.
PLEASE NOTE: RISK OF INJURY: To avoid the risk of electric shocks or fire, you need to connect the power cord directly to a grounded outlet close to the product and which is easily accessible.
6 Turn on the printer.
Add the drawer to the printer driver to make it available for printing tasks. See 'Add available options of the printer driver' on page 124 for more information.
2 Run the installer and follow the instructions on the computer display.

Upgrade and migrate 124
3 For Macintosh users: add the printer.
For Windows users
1 Open the printer folder.
3 Navigate to the Configuration tab and then select Update now - Printer questions.
4 Apply the changes.
1 Navigate via System Preferences in the Apple menu to your printer and then select Options and supplies.
2 Navigate to the list of hardware options and then add any installed options.
3 Apply the changes.
You can export the configuration settings of your printer to a text file and then import this file to apply the settings on other printers.
1 Open a web browser and type the printer IP address in the address bar.
2 Export or import a configuration file for one or more applications.
a Click on the Embedded Web Server Apps > the application you want > Configure. b Click on Export or Import.

Upgrade and migrate 125
a Click on Embedded Web Server Export Configuration or Import Configuration. b Follow the on-screen instructions.
Some applications require a minimum level of device firmware to make the device work properly.
Contact your Lexmark supplier for more information about updating the device firmware.
1 Click on the Embedded Web Server Institutions > Device > Update firmware.
2 Browse for the desired flash file.
3 Apply the changes.

Product information
Product name:
Lexmark B2338dw, Lexmarket B2442dw Lex Mark M1242, LexMark MS321dn; Lexmark MS421dn, Lxmark MS422dw printers
Device type:
Models:
230, 238, 430, 438, 490
The following paragraph shall not apply to countries where the conditions are contrary to national law: LEXMARK INTERNATIONAL, INC., THIS PUBLICATION AS SUCH PROVIDES WITHOUT ANY FORM OF GUARANTEE, NEITHER IMPLIED NOR EXPLICIT, INCLUDING BUT NOT LIMITED TO THE IMPLICIT GUARANTEES OF MERCHANTABILITY OR SUITABILITY FOR A PARTICULAR PURPOSE. In some jurisdictions, rejection of explicit or implied guarantees is not permitted in certain transactions, so this statement may not apply to you.
This publication may contain technical inaccuracies or typographical errors. The information contained in this publication is regularly reviewed, changes will be included in subsequent expenditure. The products or programmes described may be improved or modified at any time.
References in this publication to products, programmes or services do not imply that the manufacturer intends to place these products on the market in all countries where the manufacturer is active. A reference to a product, program or service does not mean that only that product, that program or that service can be used. Instead, all functionally equivalent products, programmes or services, which do not infringe existing intellectual property rights, may be used. The user shall be responsible for the evaluation and control of operation in conjunction with other products, programmes or services, except those products, programs or services specified by the manufacturer.
Go http://support.lexmark.com for technical support of Lexmark.
Go www.lexmark.com for information on supplies and downloads.
© 2018 Lexmark International, Inc.
All rights reserved.
Lexmark and the Lex mark logo are trademarks of Lex Mark International, Inc., filed in the United States and/or other countries.
Notifications 126 · September 2018

Google Cloud Print and Googel Chrome are trademarks of Goobook Inc. Android and Google Play are trademarks of Goobook LLC.
Macintosh, Mac App Store and Safari are trademarks of Apple Inc. AirPrint and the AirPrint logo are trademarks of Apple, Inc.
Microsoft, Windows and Internet Explorer are registered trademarks or trademarks of the Microsoft business group in the United States and other countries.
Mopria®, the Mopria® logo and the Mapria® Alliance logo are registered trademarks and service marks of Mopia Alliance, Inc. in the United States and other countries. Unauthorized use is strictly prohibited.
PCL® is a registered trademark of Hewlett-Packard Company. PCL is an indication of Hewlett- Packard Company for a collection of printer assignments (printer language) and functions in its products. This printer is designed to support the PCL language. The printer recognizes PCL commands used in various applications and emulates the functions corresponding to these commands.
PostScript is a registered trademark of Adobe Systems Incorporated in the United States and other countries.
Other trademarks are the property of their respective owners.
You can read all license notifications associated with this product from the CD:\KNOWINGS directory of the installation software CD.
The following measurements are made in accordance with ISO 7779 and reported according to ISO 9296.
Noise pressure on average 1 m, dBA
Scanning N/A
Copying N/A
Values can be changed. Go www.lexmark.com for current values.
Notifications 127 · Completed 14

The WEEE logo indicates that there are specific recycling programmes and procedures for electronic products in the countries of the European Union. We ask you to recycle our products.
If you have further questions about recycling options, please visit Lexmark's website at www.lexmark.com for the phone number of your local supplier.
Do not throw away the printer or components with household waste. Contact your municipality for disposal and recycling options.
This symbol indicates components sensitive to static electricity discharge. Touch parts in the areas listed below only after touching a metal surface outside of the area with the symbol.
To prevent damage caused by electrostatic discharge when performing maintenance tasks such as solving paper failures or replacing supplies, touch a exposed metal frame of the printer before doing anything with the inside of the printers even if there is no symbol.
All Lexmark products with the ENERGY STAR logo on the product or on a home screen are certified in accordance with EPA's ENERGY STAR requirements, if the configuration set by Lex Mark still applies.
Notifications 128

Ambient temperature 10 to 32°C
Temperature for transport -20 to 40 °C
Temperature for storage and relative humidity 0 to 40 °C
8 to 80% RH
The printer is certified in the United States as a product that meets the requirements of DHHS 21 CFR Chapter 1, Subpart J for Class I (1) laser products. Elsewhere, the printer is certified as a class I laser product that meets the requirements of IEC 60825-1: 2014.
Class I laser products shall be considered as not presenting any danger. The printer contains an internal class IIIb laser (3b) AlGaInP with a rated power of 15 milliwatts in a wavelength range of 650-670 nanometers in a non-usable print head unit. The laser system and printer are designed to ensure that users never have exposure to laser radiation higher than the permitted level for Class I devices, during normal use, maintenance by the user or prescribed service activities.
The following table describes the printer's energy consumption characteristics.
Mode Description Power consumption (Watt)
Printing
Paper copies of electronic imports shall be made with the product.
Single sided: 520 (MS321, B2338), 570 (MS421, M1242, B2442); double sided; 315 (MS321, B23 38, 345 (MS41, M1242 and B2442)
Copying Paper copies of paper originals are made with the product.
NA
Scan Paper originals are scanned with the product. NA
Ready The product is waiting for a printing job. 7 (MS321, B2338), 7.5 (MS421, M1242, B2442)
Sleep Mode The normal device save mode is activated. 1.8 (MS321, B2338), 1.6 (MS421, M1242, B2442)
Snooze mode The optimal saving mode of the device is activated. 0.1
The product is connected to an outlet, but the device is switched off.
The energy consumption levels shown in the previous table indicate measurements of average times. Immediate energy reductions can be substantially higher than the average.
Notifications 129 · 0.1

Values can be changed. Go www.lexmark.com for current values.
This product has an energy-saving mode called sleep mode. In sleep mode, energy is saved by reducing power consumption during longer periods of time when the device is not active. The sleep mode is automatically switched on when the product is not used for a pre-set period (timeout for sleep mode).
Standard setting for the time-out of this product (in minutes): 15
You can set the time-out for sleep mode from configuration menus between 1 minute and 120 minutes. If you set the sleep timeout to a low value, energy consumption will decrease but product response times may increase. When you set the time-out for sleep mode to a high value, the printer reacts quickly but more energy is consumed.
This product has a mode in which it consumes very little energy called slumber mode. If the printer's slumber mode is active, other systems and devices will be switched off safely.
You can use the following methods to enable slumber mode:
The standard slumber mode time-out for this product in all countries or regions 3 days
You can set the time period that the printer waits for before the slumber mode is enabled after a task has been printed between one hour and one month.
If this product has a power-off mode but still consumes a small amount of energy and you want to stop the product's electricity consumption completely, pull the plug on the product from the socket.
It is sometimes useful to calculate the total energy consumption of the product. As the power consumption is indicated in watts, the current consumption should be multiplied by the time that each mode is active on the product. This way you can calculate the energy consumption. The total energy consumption of the product is the sum of the energy consumption for all modes.
This section contains information on regulation that applies only to wireless models.
If you have doubts as to whether your model is a wireless model, please go http://support.lexmark.com.
Notifications 130

Wireless models contain one of the following modular components:
Lexmark regulated type/model number LEX-M07-001; FCC ID:IYLLEXM07001; Industry Canada IC:2376A- LEXM07001 Lex mark regulated type /model number LEX-M08-001, FCC id:IylLEXM08001; IC:2376A-LEXM080001
To determine which modular components are installed in your specific product, please refer to the labels on the product.
The amount of high frequency energy emitted by this wireless device is well below the limits for high frequency power set by the FCC and other regulatory authorities. There shall be a minimum of 20 cm (8 inch) space between the antenna and any person to meet the high frequency energy requirements of the FCC and other regulatory authorities.
This product complies with the safety requirements of Directives 2014/30/EU, 2014/35/EU, 2009/125/EC and 2011/65/EU of the Council of the European Community concerning harmonisation of Member States' laws on electromagnetic compatibility and safety of electrical equipment designed for use within certain voltage limits, energy efficiency of products consuming energy and restriction of the use of certain hazardous substances in electrical and electronic equipment.
The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550, United States. The recognised representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY. A declaration of conformity to the requirements of the regulations may be obtained on request from the approved representative or www.lexmark.com/en us/about/regulatory-compliance/european-union-declaration-of-conformity.html.
This product meets the requirements of EN55022 and EN55032 with regard to Class B products and the safety requirements of either EN 60950-1 or EN 62368-1.
This product complies with the safety requirements of Council Directive 2014/53/EU on the approximation of Member States' laws relating to radio equipment.
The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550, United States. The recognised representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY. A declaration of conformity to the requirements of the regulations may be obtained on request from the approved representative or www.lexmark.com/en us/about/regulatory-compliance/european-union-declaration-of-conformity.html.
Notifications 131

The CE sign indicates that a device complies with the safety requirements:
radio frequency capability
This radio product emits in the 2.4 GHz (2.412 - 2,472 GHz band) across the EU. The maximum output power of the transmitter, including antenna reinforcement, is ≤ 20 dBm.
Notifications 132



Pages referenced in this manual — manufacturer, support and downloads.
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.