
User manual
Type(s) of equipment:
Models:
285, 485, 685





Conventions
Various precautions:
Precautionary Statements 6

CAUTION – POSSIBLE RISK OF INJURY The power cord shall not be cut, distorted, pinched or squeezed. In addition, no heavy objects may be placed on it. Do not expose the cable to wear or other stress. Do not clamp the power cord between objects such as B. furniture or walls. If one of these hazards is present, there is a danger of fire and electric shock. Check the power cord regularly for these dangers. Unplug the power plug from the socket before checking the power cord.
CAUTION – ELECTRIC SHOCK HAZARD: If you want to access the control board after setting up the printer or install optional hardware or storage media, first turn off the printers and unplug the power cord from the outlet to avoid the risk of an electric shock. If there are other devices connected to the printer, turn them off as well and unplug all cables on the printers.
Precautionary Statement 7

This device and its associated components have been designed and tested for use in compliance with global safety requirements. The safety-relevant functions of the components and options are not always obvious. If parts are used that do not originate from the manufacturer, he assumes no responsibility or liability for this product.
Have all maintenance and repair work not described in the user documentation done exclusively by a customer service representative.
This product uses a printing process in which the print media are heated. This warming can lead to emissions from the printing media. It is therefore important that you read carefully in the user manual the section dealing with selecting suitable print media and follow the guidelines listed therein to prevent harmful emissions.
This product may produce small amounts of ozone in normal operation and can be equipped with a filter that reduces the concentration of ozoan to well below recommended exposure limits. To avoid high ozone concentrations during intensive use, you should place this product in a well-ventilated environment and replace the ozonate and exhaust filters according to product maintenance instructions. If the product maintenance instructions do not contain any information about filters, this product does not have filters that need to be replaced.
Precautionary Statements 8

KEEP THESE INSTRUCTIONS.
Precautionary Statements 9

Information about the printer 10
Determining Printer Information

Information about the printer 11


Information about the printer 12


1 Scanner · 5 Control panel

Information about the printer 13
1 Automatic Document Feeder (ADZ)

1 Power button turn the printer on or off.
2 Home button Return to the home screen.
3 Return button return to the previous screen.
4 Start button Launches an order depending on the selected mode.
5 Tell-tale Indicates the printer status.
1 Tap the input field.
2 Hold the voice key on your keyboard.

Information about the printer 14
3 Select a language.
The printer is switched off or in sleep mode.
Blue The printer is ready or processing data.
Red flashing The printer is waiting for an action from the user.
Constant yellow The printer is in energy-saving mode.
Use the appropriate paper to avoid jams and ensure trouble-free printing.
The following paper properties affect the print quality and reliability of the printer. Take these factors into account before printing.
The compartments are designed for paper with vertical fiber direction weighing 60 to 176 g/m2. Paper below 60 g/m2 may not be strong enough to be properly drawn in, causing paper jams.
The term “corrugated” is understood to mean the tendency of paper to wave at its edges. Excessive wavering can cause problems with paper feed. The corrugation can occur after the paper has passed through the printer, where it was exposed to high temperatures. If you keep paper unpacked in a hot, damp, cold or dry environment, then it can waviness before printing and cause pull-in problems.
Printer status tell-tale

Information about the printer 15
The smoothness of paper directly affects the printing quality. If paper is too rough, the toner cannot be fixed properly on the paper. If the paper is too smooth, indentation problems or print quality issues may be caused. We recommend using paper with 50 Sheffield points.
The moisture content of the paper affects print quality and the ability of the printer to properly draw in the paper. Keep paper in the original packaging until you use it. Exposing the paper to moisture fluctuations can have a negative impact on the quality of the paper.
Store the paper in its original packaging 24 to 48 hours, in the same environment as the printer. Extend the time to several days if the storage or transport environment is very different from the printer environment. For thick paper, a longer processing period may also be required.
The fiber direction relates to the alignment of the paper fibers in a sheet of paper. The fiber direction is either vertical, i.e. h the fibers run in longitudinal direction of the paper, or horizontally, i.e. h the fibers run in transverse direction of the paper.
For paper weighing between 60 and 176 g/m2, vertical fibre direction is recommended.
Most high-quality xerographic papers are made of 100% chemically defibered wood. This content gives the paper a high stability, so that fewer problems occur during paper feed and higher print quality is achieved. paper which contains fibers such as e.g. B. cotton, can have a negative effect on paper handling.
The following types of paper should not be used for the printer:

Information about the printer 16
Follow the following paper storage guidelines to avoid jams and ensure consistent print quality:

Information about the printer 17
Paper format 250 sheet tray Manual feed Two-sided printing ADZ scanner glass
A4 210 x 297 mm (8,27 x 11,7 Zoll)
148 x 210 mm (5,83 x 8,27 Zoll)
105 x 148 mm (4,13 x 5,83 Zoll)
JIS B5 182 x 257 mm (7,17 x 10,1 Zoll) X
Oficio (Mexico) 215,9 x 340,4 mm (8,5 x 13,4 Zoll) X
100 x 148 mm (3,94 x 5,83 Zoll)
Statement 139,7 x 215,9 mm (5,5 x 8,5 Zoll) X
184,2 x 266,7 mm (7,25 x 10,5 Zoll)
Letters 215,9 x 279,4 mm (8,5 x 11 Zoll)
Legal legal 215,9 x 355,6 mm (8,5 x 14 Zoll) X
215,9 x 330,2 mm (8,5 x 13 Zoll)
98 x 148 mm (3.86 x 5.83 inches) to 215.9 x 355,6 mm (8.5 x 14 inches).
7 3/4 envelope 98,4 x 190,5 mm (3,875 x 7,5 Zoll) 5 X X
98,4 x 225,4 mm (3,875 x 8,9 Zoll)
10 Envelope 104,8 x 241,3 mm (4,12 x 9,5 Zoll) 5 X X
1 By default, the indentation with the long edge is supported. When the short edge is drawn in, A5 is treated as a narrow paper.
2 This paper source only supports paper sizes up to 216 x 297 mm (8.5 x 11.7 inches).
3 When selecting "Universal", the page is formatted to 215.90 x 355.60 mm (8.5 x 14 inches), unless otherwise specified in the software application.
4 Insert narrow paper so that the short edge page is first drawn into the printer.
Up to 5 envelopes can be inserted at the same time.

Information about the printer 18
Paper format 250 sheet tray Manual feed Two-sided printing ADZ scanner glass
110 x 220 mm (4,33 x 8,66 Zoll) 5 X X
C5 Envelope 162 x 229 mm (6,38 x 9,01 Zoll) 5 X X
B5 Envelope 176 x 250 mm (6,93 x 9,84 Zoll) 5 X X
98.4 x 162 mm (3.87 x 6.38 inches) to 176 x 250 mm (6.93 x 9.84 inches).
1 By default, the indentation with the long edge is supported. When the short edge is drawn in, A5 is treated as a narrow paper.
2 This paper source only supports paper sizes up to 216 x 297 mm (8.5 x 11.7 inches).
3 When selecting "Universal", the page is formatted to 215.90 x 355.60 mm (8.5 x 14 inches), unless otherwise specified in the software application.
4 Insert narrow paper so that the short edge page is first drawn into the printer.
Up to 5 envelopes can be inserted at the same time.


DL envelope · Other envelope3

Information about the printer 19
Paper grade and weight 250-sheet compartment Manual feed Two-sided printing
75–90,3 g/m2 vertical fibre direction
90,3-105 g/m2 vertical fibre direction
105-162 g/m2 vertical fibre direction X
105.1-200 g/m2 vertical fibre direction
131 g/m2 X
60–105 g/m2 X

Setting up, installing and configuring 20
Selection of a printer location
Operating temperature 10 to 32.2 °C

1 Top 305 mm (12 inches)
2 Rear 102 mm

Setting up, installing and configuring 21
3 Right side 76 mm
4 Front 508 mm
5 Left side 76 mm


Setting up, installing and configuring 22
1 LINE port Connect the printer to an active telephone line via a standard phone jack (RJ-11), DSL filter or VoIP adaptor, or other adapter that allows you to access the telephone line for sending and receiving fax messages.
2 Ethernet port Connect the printer to a network.
3 USB printer port Connect the printer to a computer.
4 Power cord socket Connect the printer to a properly grounded power outlet.

1 Navigate to the control panel:
Settlements > Equipment > Settlements > Carry out initial equipment
2 Turn the printer off, wait for about 10 seconds and then turn it back on.
Printer port function

Setting up, installing and configuring 23
3 Configure the settings on the "Fax Facility" tab.
4 Complete the device.
1 Open a web browser and enter the printer’s IP address in the address field.
2 Click on it Settlements > Fax > Analogue fax configuration > General fax settings.
3 In the Faxname field, enter the name that should be printed on all outgoing fax messages.
4 In the field Fax number, enter the printer's fax number.
5 Apply the changes.

Setting up, installing and configuring 24

1 Connect one end of the phone cable to the printer's line port.
2 Connect the other end of the cable to an active analog telephone socket.

Setting up, installing and configuring 25

1 Connect one end of the phone cable to the printer's line port.
2 Connect the other end of the cable to an active analog telephone socket.

Setting up, installing and configuring 26
By default, the RJ11 telephone jack is used in most countries or regions. If the phone jacks or devices in your telephone system are not compatible with this type of connection, use a phone adapter. An adapter for your country or region may not be included with printers and must be purchased separately.
An adapter plug may be connected to the printer's telephone connection. Do not remove the adapter plug from the printer’s phone port if you are using a cascaded or serial telephone system.

Parts Description Parts Lexmark adapter plug 40X8519

Setting up, installing and configuring 27

1 Connect one end of the phone cable to the printer's line port.
2 Connect the other end of the cable to the RJ11 adapter, and connect the adaptor to the phone jack.
3 If you connect another device with an RJ11 port to the same phone jack, connect it directly to the telephone adapter.

Setting up, installing and configuring 28
German telephone jacks have two types of connections. N-connections are suitable for fax machines, modems and answering machines. The F-connector is designed for telephones. Connect the printer to any N port.

1 Connect one end of the phone cable to the printer's line port.
2 Connect the other end of the cable to the RJ11 adapter and connect the adaptor to the N port.
3 If you want to connect a phone and answering machine to the same telephone jack, plug in devices as shown.

Setting up, installing and configuring 29
With different call signals, you can assign multiple phone numbers to a telephone line. Each telephone number is assigned a different call sign pattern.
1 In the Home screen, press the option Settlements > Fax > Analogue faxing equipment > Fax reception settings > Admin control > Response activated.
2 Select the call sign pattern.
3 Apply the changes.
1 Touch the option on the home screen Settlements > Equipment > Preset settings > Time and date > Configuration.
2 Configure the settings.
1 Touch the option on the home screen Settlements > Equipment > Preset settings > Date and time > Configuration.
2 Select Time Zone in the menu (UTC+User) User Defined Off.
3 Tap on the Configure menu UTC shift.
4 Configure the settings.
1 Touch the option on the home screen Settlements > Fax > Analogue faxing equipment > Loudspeaker settings.
1 Navigate from the home screen to:
Settlements > Paper > Subject configuration > Paper size/grade > Select a paper feeder
2 Set the paper size and type of paper.

Setting up, installing and configuring 30
1 Touch the option on the home screen Settlements > Paper > Media configuration > Configuration Universal.
2 Configure the settings.
1 Pull the tray out.

2 Before inserting, bend the paper in both directions, fan it up and level out the edges.

3 Place the paper stack with your print page up.


Setting up, installing and configuring 31

4 Adjust the guides so that they match the format of the inserted paper.

5 Push the tray into the printer.
If necessary, set the paper size and type on the printer control panel according to the inserted paper.

Setting up, installing and configuring 32
1 Adjust the paper guide to match the format of the inserted paper.

2 Place a sheet of paper with the print side up. • For one-sided printing, insert sheets of letter with the print side up and front edge first into the printer.



Setting up, installing and configuring 33

3 Place paper until the guide edge is pulled in.
2 Run the installer and follow the instructions on your computer screen.
3 Add the printer for Macintosh users.
Some applications require a minimum version of the device firmware to function properly.
More information about updating the device firmware can be obtained from your Lexmark merchant.
1 Click on the Embedded Web Server Settlements > Equipment > Firmware Update.
2 Navigate to the required flash file.
3 Apply the changes.
You can export your printer’s configuration settings to a text file, which can then be imported to apply the settings on other printers.
1 Open a web browser and enter the printer’s IP address in the address field.

Setting up, installing and configuring 34
2 Click on the Embedded Web Server Exporting configuration or Importing configuration.
3 Then follow the instructions on screen.
4 If the printer supports applications, do this: a Click on it Apps > and select the application > Configuration. b Click on it Exporting or Import.
1 Switch to the home screen:
Settlements > Network/connections > Wireless
2 Select Device device on printer control panel Then follow the instructions on display.
1 Depending on your mobile device, download the Lexmark Mobile Assistant application from either Google PlayTM Store or online app store.
2 Navigate to the control panel:
Settlements > Network/connections > Wireless > Installation with mobile app > Continue to the printer ID
3 Start the application from your mobile device and accept the terms of use.
5 Tap them Starting the WLAN installationAnd select the printer.
6 Select a Wi-Fi network and enter your login information.
7 Tap them Completing the WLAN device.
4 Granting of permissions

Setting up, installing and configuring 35
At the beginning, make sure you are:
1 Navigate to the control panel:
Settlements > Network/connections > Wireless > Wid‑Fi Protected Setup > Start the keystroke method
2 Follow the instructions on display.
1 Navigate to the control panel:
Settlements > Network/connections > Wireless > Wid‑Fi Protected Setup > Starting the PIN method
2 Copy the eight-digit WPS PIN.
3 Open a web browser and enter the IP address of your access point in the address field.
4 Go to the WPS settings. More information can be found in the manual for the access point.
5 Enter the eight-digit PIN and save the change.
1 Activate Wi-Fi Direct® in the printer. Touch the option on the home screen Settlements > Network/connections > WLAN > Activate Wi-Fi Direct.
2 Connect your mobile device to the printer’s Wi-Fi.

Setting up, installing and configuring 36
1 Touch on the home screen Settlements > Network/connections > Network overview > Active adapter > Standard network.
2 Follow the instructions on display.
1 Touch the option on the home screen Settlements > Reports > Network > Network configuration page.
2 In the first section of the network configuration page, check if it has a status called "Connected".
If the status is “Not connected”, the LAN drop may not be active or the network cable might be faulty. Contact the administrator to resolve the issue.
Touch the option on the home screen Settlements > Reports > Menu settings page.

securing the printer 37
Erasing the printer memory
To delete volatile memory or cached data in your printer, turn the printer off.
To delete non-volatile memory or individual settings, device and network settings and security settings as well as embedded solutions, do the following:
1 Touch the option on the home screen Settlements > Equipment > Maintenance > Unloading from operation.
2 Activate the check box Clean up all information in the permanent storageand then touch them. OK.
3 Follow the instructions on display.
1 Touch on the home screen Settlements > Equipment > Restore factory specifications.
2 In the "Restore Settings" menu, select the settings you want to restore.
3 Touch them RESTORE.
4 Follow the instructions on display.
Your printer is equipped with various types of storage that are able to store device and network settings, as well as user data.
Flush memory Your printer uses a standard random access memory (RAM) to temporarily store user data on simple printing jobs.
Your printer can use two types of non-volatile memory: EEPROM and NAND (flash storage). Both types are used to store information about the operating system, device settings and network information.
In the following circumstances, the contents of the installed printer memory should be deleted:
Memory type Description · Non-volatile storage

Printing from a computer
1 In the document you want to print, open the Print dialog box.
2 Adjust the settings as needed.
3 Print the document.
With Mobile Print, you can send documents and images directly to a supported Lexmark device.
1 First open the document, and then send it to Lexmark Mobile Print or share it with Lex mark Mobile Print.
2 Select a printer.
3 Print the document.
Google Cloud PrintTM is a print service that allows you to print on any Google Cloud print-enabled printer.
At the beginning, make sure you are:
1 On your mobile device, open a document or select a document from the File Manager.
2 Tap them
> Printing.
3 Select the bookmark, and tap on it.
Mopria® Printing service is a mobile printing solution for mobile devices running AndroidTM version 4.4 or higher. This allows you to print directly on any Mopria certified printer.
Printing 38

1 Open a compatible application on your mobile Android device, or select a document from the File Manager.
2 Tap them
> Printing.
3 Select a printer and adjust the settings if necessary. an.
4 Tap on .
AirPrint is a mobile printing solution that allows you to print directly from Apple devices on an airprint certified printer.
1 Launch a compatible application from the home screen of your mobile device.
2 Select the item to print, and then tap on the share icon.
3 Tap them PrintingAnd select a printer.
4 Print the document.
Wi-Fi Direct is a printing service that allows you to print on any Wi-FI Direct enabled printer.
1 Open a compatible application on your mobile device, or select a document from the File Manager.
2 Depending on your mobile device, follow one of the following steps:
> Printing.
> Printing.
3 Select a printer and adjust the settings if necessary. an.
4 Print the document.
Print 39

1 Install the flash drive.

2 Select the document to print.
If necessary, configure the pressure settings.
3 Print the document.
Select USB driveto print another document.

Print 40

– The printer supports high-speed USB flash drives with full speed standard. – USB flash drives must support the FAT file system (File Allocation Tables).
PDF (Version 1.7 or earlier) Images
.JPEG or .jpg
1 Navigate to the control panel:
Settlements > Security > Settings for confidential printing.
2 Configure the settings.
Max. Invalid PINs Limit the number of invalid PINE inputs.
Expiry date for confidential contracts
Set the expiration period for confidential printing.
Set the expiration period for a repeat print job.
Expiry date for contracts to be reviewed
Set the expiration period so that the printer will print a copy before printing any remaining copies.
Expiry date for reserved printing
Set the time limit for storing print jobs in the printer.
Requirement to hold all orders
Set the printer to stop all printing jobs.
Set the printer to print all documents with the same filename.

1 Click on an open document File > Printing.
2 Click on it Characteristics, Preset settings, Options or Establishment.
3 Click on it Printing and retention.
4 Select Printing and retention Then, assign a username.
5 Select the print job type (confidential, repeated, reserved or confirmed).
If the print job is confidential, enter a four-digit PIN.
6 Click on it OK or Printing.
1 Select when the document is open File > Printing Off.
If necessary, click the triangle to display more options.
2 Select the option in the dialog box with print options or in the "Copies & Pages" menu Order routing.
3 Select the print job type (confidential, repeated, reserved or confirmed).
If the print job is confidential, assign a username and four-digit PIN.
4 Click on it OK or Printing.
Printing 42

1 Touch the option on the home screen Settlements > Reports > Printing > Printing typefaces.
2 Press PCL fonts or PostScript fonts.
1 Tap on the home screen Settlements > Printing > Layout > Separation sides > Between Copies.
2 Print the document.
1 Touch the option in the home screen Order queue.
2 Select the job to be cancelled.
2 Select the job to be cancelled.
1 Touch the option on the home screen Settlements > Printing > Quality.
2 Adjust the toner order.
3 Apply the changes.
Printing 43

Use of the automatic document feeder (ADZ) and scanner glass
Automatic document feeder (ADZ) scanner glass


1 Place an original document in the ADZ compartment or on the scanner glass.
2 Tap the option on the Home screen Copy, and then enter the number of copies.
Please adjust if necessary. the copy settings.
3 Copy the document.
1 Place a photo on the scanner glass.
2 Navigate to the control panel:
Copying > Content type > Photo
3 Copy the document.
Copy 44

1 Place an original document in the ADZ compartment or on the scanner glass.
2 Tap the option on the Home screen Copying > Copying of > , and select the format of the original document.
3 Tap them Copying on, and then select the paper source with the letter sheet.
After inserting the letter sheet into the manual feed, switch to:
Copying after > Manual feeding > Select paper format > Letters
4 Copy the document.
1 Place an original document in the ADZ compartment or on the scanner glass.
2 Touch on the home screen Copying > Sides.
3 Adjust the settings.
4 Copy the document.
1 Place an original document in the ADZ compartment or on the scanner glass.
2 Switch to the home screen:
Copying > Scaling > Enter the desired value
3 Copy the document.
1 Place an original document in the ADZ compartment or on the scanner glass.
2 Touch on the home screen Copying > Sorting > Ein [1,2,1,2,1,2].
3 Copy the document.
1 Open a web browser and enter the printer’s IP address in the address field.
Copying 45

2 Click on it Short dialling numbers > Add a short dial number.
3 Select from the menu "Short number type" Copy Then, set the settings.
4 Apply the changes.
Copy 46

Use of the automatic document feeder (ADZ) and scanner glass
Automatic document feeder (ADZ) scanner glass
1 Open a web browser and enter the printer’s IP address in the address field.
2 Click on it Settlements > E-mail > E-mail establishment.
3 Configure the settings.
4 Apply the changes.
1 Open a web browser and enter the printer’s IP address in the address field.
Email 47

2 Click on it Settlements > E-mail.
3 Enter the required information.
4 Apply the changes.
1 Place an original document in the ADZ compartment or on the scanner glass.
2 Select the option on the control panel E-mail, and then enter the necessary information.
Press on printer models without a touchscreen #, and then enter the shortcode number via the keyboard.
3 If necessary, configure the settings for the output file type.
4 Send the email.
1 Open a web browser and enter the printer’s IP address in the address field.
2 Click on it Short dialling numbers > Add a short dial number.
3 Select from the menu "Short number type" E-mail Then, set the settings.
4 Apply the changes.
E-mail 48

Use of the automatic document feeder (ADZ) and scanner glass
Automatic document feeder (ADZ) scanner glass
1 Place the original document in the automatic document feeder (ADZ) or on the scanner glass.
2 Select the option on the control panel Faxes, and then enter the necessary information.
3 If necessary, configure further fax settings.
4 Fax the document.
1 In the document you want to fax, open the Print dialog box.
2 Select the printer, and click on it. Characteristics, Preset settings, Options or Equipment..
3 Click on it Faxes > Fax activation, and enter the recipient's number.
Faxes 49

4 If necessary, configure further fax settings.
5 Fax the document.
1 Select when the document is open File > Printing Off.
2 Select the printer, and then enter the recipient’s number.
3 If necessary, configure further fax settings.
4 Fax the document.
1 Open a web browser and enter the printer’s IP address in the address field.
2 Click on it Short orders > Add a short command.
3 Select from the "Short Command Type" menu Fax Then, set the settings.
4 Apply the changes.
1 Place an original document in the ADZ compartment or on the scanner glass.
2 Select the option on the control panel Faxes, and then enter the necessary information.
3 Select a setting in the "Resolution" menu.
4 Send the fax order.
1 Place an original document in the ADZ compartment or on the scanner glass.
2 Select the option on the control panel Faxes, and then enter the necessary information.
3 In the menu "Toner order" adjust the setting.
4 Fax the document.
Faxes 50

1 Open a web browser and enter the printer’s IP address in the address field.
2 Click on it Settlements > Reports > Fax.
3 Click on it Fax order protocol or Fax call protocol.
1 In the Home screen, press the option Settlements > Fax > Analogue faxing equipment > Fax reception settings > Admin control > Block Fax without a Name.
2 Apply the changes.
1 Open a web browser and enter the printer’s IP address in the address field.
2 Click on it Settlements > Faxes > Analogue fax configuration > Fax receiving settings > Retaining faxes.
3 Select a mode.
4 Apply the changes.
1 In the Home screen, press the option Settlements > Fax > Analog fax configuration > Fax reception settings > Admin control.
2 Configure the shortcuts for "Fax Forwarding", "Forward to" and "forward to Short-Dial Settings".
3 Apply the changes.
Faxes 51

Use of the automatic document feeder (ADZ) and scanner glass
Automatic document feeder (ADZ) scanner glass
1 Open a web browser and enter the printer’s IP address in the address field.
2 Click on it Short orders > Add a short command.
3 Select from the "Short Command Type" menu FTP Then, set the settings.
4 Apply the changes.
Scan 52

1 Place an original document in the ADZ compartment or on the scanner glass.
2 Install the flash drive.
3 Touch them Scan to USB And adjust the settings if necessary.
4 Scan the document.
Scanning 53

1 Place an original document in the ADZ compartment or on the scanner glass.
2 On the Home screen, press the option Scanning profiles > Scanning on computer.
3 Select the scan profile for which you want to save the document.
Scan 54

Menu allocation

* These menu options are only displayed in the Embedded Web Server.
Printer menus use 55

Specifies in which language the text is displayed on the display.
Identify the country or region in which in which the printer has been configured for operation.
[List of countries or regions]
Executing the configuration assistant.
Select a language as the keyboard type.
Select the information to display on the Home screen.
Display text 1 [IP address*] Display text 2 [date/time*] Custom text 1 User-defined text 2
Configure printer date and time.
Current date/time Date & time manually set date format [MM-DD YYYY*] Time format [12 hours AM/PM*]Time zone [GMT*] UTC (GMT) shift start of DST end daylight savings time shift to DST
Configure the settings for Network Time Protocol (NTP).
Network Time Protocol (NTP)
Activate NTP [A*] Enable NTP Server Authentication
Specifies the unit of measurement for paper formats.
U.S.* Metrics
20-100% (100*) Adjust the display brightness.

Access to the flash drive
Allow access to the flash drive.
Sets that only one side of the scanner glass is copied at a time.
5-300 (60*) Set the inactive time of the printer within seconds, which must pass before the display shows the home screen or the printers automatically log out from a user account.
Connect an external Virtual Network Computing (VNC) client to the remote control panel.
Set the authentication type when accessing the VNC client server.
VNC password Enter the password for connecting to the VNC client server.
Activate a sound for the infeed of paper into ADZ.
Specify how often the warning signal will sound when the printer requires user intervention.
Displays the estimated status of consumables.
Show estimates*Don't show estimates

Set how often the warning signal will sound when the cassette is almost empty.
Configure the notification settings if user intervention is required.
Enter the primary SMTP gateway or hostname of the primary smtp server for email delivery.
Enter the connection number of the primary SMTP server.
Enter the server IP address or hostname of your secondary or backup SMTP server.
Enter the connection number of your secondary or backup SMTP server.
Set the time before the printer's time limit expires if the SMTP server does not respond.
In the e-mail, provide a reply address.
Use the SMTP default response address.
Send an email via an encrypted link.

Request a trusted certificate when accessing the SMTP server.
Set the authentication type for SMTP server.
No authentication required* Registration/Normal NTLM CRAM‐MD5 Digest–MD5 Kerberos 5
Set whether device-initiated emails require authentication information.
Device-initiated email
Do not use * SMTP login information of the device
Enter the user ID for connection to SMTP server.
Enter the password for connecting to SMTP server.
Enter the domain name for the NTLM security protocol.
Deactivate the display of an error message about SMTP setup on the display.
Error "SMTP Server not set up" deactivate
Set the printer to automatically output blank pages or partially printed pages once a jammed page has been removed.
Have the printer continue to process or print jobs automatically after certain printer conditions requiring user intervention have been fixed automatically.
Deactivated Activated* (5 seconds) Continue automatically – Time

Set the printer to restart when an error occurs.
Start again when inactive Always restart* Never restart
Set the number of automatic restarts that the printer can perform.
Set the number of seconds that must pass before the printer performs an automatic restart.
Display the read-only status of the restart counter.
Automatic restart counters
Set the printer to display a message if there is an error "Paper is too short".
Error "Paper is too short"
Set the printer to slide the entire page into memory before printing it.
Set the printer to reprint jammed pages.
Specify how a scan job will restart after fixing a paper jam.
Continue after traffic jam - scanner

Energy-saving profile
Set the printer to remain in Ready mode after printing or switch back into Energy Saving Mode.
After printing, remain on Energy Saving Mode after printing
Sets the idle time before the printer switches to energy-efficient mode.
1–120 Min. (15*)
Set the time before the printer is turned off.
Deactivated 1 hour 2 hours 3 hours 6 hours 1 day 2 days 3 days* 1 week 2 weeks 1 month
Set Sleep Mode Time Lock to turn the printer off while an active Ethernet connection is present.
Enable sleep mode Do not switch to sleep mode*
Minimizes the consumption of energy, paper or specialty printing media.
From * Energy energy / paper paper

Information sent to Lexmark
Send printer consumption and printer performance information to Lexmark.
Use of consumables and equipment performance No*
Restore the printer's factory specifications.
Reset all Printer Settings Reset Network settings Revert Fax settings
Configuration menu
Change the USB driver mode of your printer to improve its compatibility with a PC.
Specify whether the USB device driver is specified as a simple USB (simple interface) or a combination USB (multi-interface) device.
Set the USB port to work with full speed and disable its Hi-Speed function.
The notification shall: Specialist insert is displayed.
From Only for Unknown Paper Sizes* Always

Specify the page orientation for infeeding paper in A5 format.
Short edge Long edge*
Set the paper feeder that the user fills when asked to insert paper.
Set the paper feeder that the user fills when asked to insert envelopes.
Set up the printer to provide prompts related to paper or The cover is to be changed.
Ask users to continue using current
Print reports on the printer's menu settings, status and event logs.
Menu settings (page) Event log
Reset the history of consumable, such as number of remaining pages and days, to factory condition.
Delete the history of consumable
Reset the counter after inserting a new consumable.
Reset Fixing station reset ITM Cartridge counter Black reset cartridge count Cyan reset Cartton counter Magenta resetcartridge clock Yellow
Set the fax to switch to "Energy Saving Mode" as soon as the printer specifies it.
Fax at the bottom. Power management mode
Power-saving mode deactivate power-save mode allow for car*
Print color content in grayscale.

Improve the print output and compensate for false color registrations in the printer.
Aus 1 2* 3 4 5
Set a maximum value for the point size of text under which high-frequency screens are used when printing font data.
For example, if you set the value 24, all point sized fonts or less will use high-frequency screens.
Set the printer to work in silent mode.
Allow access to the menus of the control panel.
Delete custom strings for standardized or alternative user-defined messages.
Deletes messages that have been installed remotely from the printer.
Delete all remotely installed messages
Display existing error messages on the display after the printer is inactive on the home screen for a time equivalent to that of the Display Time Lock setting.
Set the default calibration frequency.
Disabled Least Color Adjustments Lower Colour Adjustment Normal* Better Color Fidelity Best Color Facilities
Perform the full color calibration.

Print a diagnostic page that outputs the calibration of the toner density sensor.
Print out a quick test landing page.
Register flatbed and automatic document feeder (ADZ) manually after the ADZ, scanner glass or control board has been replaced.
Registration front ADZ flatbed registration
Set the size in millimeters of the non-printing area around a scan job with ADZ or flat bed.
Flat bed - delete edge
0-6 (3*) ADZ – Delete the edge
Deactivate the scanner if it is not working properly.
Activated* Deactivated ADZ deactivates
Set the byte order of a TIFF-formatted scan output.
Determine the RowsPerStrip tag value for a TIFF-formatted scan output.
Exact Tiff Rows by Strip
Clean up all information in the permanent storage
Delete all settings and applications that are stored in the printer.
Delete all printer and network settings Delete All shortcode numbers and Shortcode Settings

Set which icons should be displayed on the Home screen.
Device number Describe the printer. The maximum length is 32 characters.
Location of the printer Identifies the printer location. The maximum length is 63 characters.
Contact details Personalize the printer name. The maximum length is 63 characters.
Export configuration file to USB* Exports configuration files to a flash drive.
Export compressed log files to USB*
Exports compressed log files to a flash drive.
Send diagnostic information to Lexmark.
* This menu option only appears on some printer models.

Indicate whether the paper is to be printed on one or two sides.
Determines which side of the paper (long edge or short edge) is bound when printed on two sides.
Long edge* Short edge
Print blank pages in a print job.
Maintain the order of pages in a print job, especially when printing multiple copies of a print task.
Aus [1,1,1,2,2,2] An [1,2,1,2,1,2]*
When printing, insert several empty separating pages.
No * Between Copies between Orders Between Pages
Determines from which paper feed the separating side is supplied.
Print multipage images on a sheet of paper.
From* 2 sheets per page 3 leaves per side 4 sheetsper page 6 sheetsPer page 9 sheets Per page 12 sheets/page 16 sheets
Pages per page (arrangement)
When multipage printing, set the position of page images if you use pages per page.
Horizontal* Reverse horizontally vertically
Pages per page (orientation)
When multipage printing, set the orientation of documents if you use pages per page.

Pages per page (edge)
Print a frame around each page image when using pages per page.
1–9999 (1*) Specify the number of copies for each print job.
Set the printable area on a sheet of paper.
Normal* Adjust to side Full page
Set the printer language.
Determine how the color cartridges should work during printing.
Maximum speed maximum capacity*
Sets the order in which confidential and paused print jobs are printed when the All Print option has been selected.
Alphabetical* Latest First Elders first
Set the printing mode.
4800 CQ* Set the resolution for print output.

Then, determine the brightness or Darkness of text images.
Improves the print output with softer lines with sharper edge.
Control brightness, contrast and saturation for color prints.
-6 bis 6 (0*)
0 bis 5 (0*)
0 bis 5 (0*)
Adjust the amount of toner used for each color.
−5 to 5 (0*) Magenta
−5 to 5 (0*) Yellow
−5 to 5 (0*) Black
−5 to 5 (0*) Restore default settings
Change the color settings for printing documents.
Adjust the colour Calibrate the printer to adjust color variations in expression.

Print a page describing the PostScript® error.
1–30 (2*) Set the minimum line width.
Deactivates the SysStart file.
Improve the contrast and sharpness of low-resolution images.
Specifies that the printer waits for further data to be received before cancelling a printing job.
15–65535 (40*) Sets the time period in seconds for how long a printer waits to receive additional data before cancelling the printing job.
Select a font from the specified font source.
[List of available fonts] (Courier*)
Determine the character set for each typeface name.
[List of available character set] (10U PC-8*)
0,08–100 (10*) Specify the division of fonts with fixed or uniform character spacing.
Set the orientation of text and graphics on the page.

1-255 Set the number of lines for each page, printed via PCL®
Data stream.
1–30 (2*) Set the original minimum line width.
Set the width of the logical page for A4 format.
198 mm* 203 mm
Auto WR to ZV
Set the printer to automatically perform a cart return after a line feed control command.
Auto ZV to WR
Set the printer to automatically perform a line feed after a control command for the cart return.
Enable the option that the printer ends a printing job after it has been in energy-efficient mode for the specified time (in seconds).
1-255 (90*) Set the time (in seconds) when the printer will finish a printing job after it has been in energy-efficient mode.
Autom. Adapted
Select the best available paper format and desired orientation for an image.
Inverts black and white images.

Adjust the image optimally to the print area.
Top left anchor Best Adjustment* Center Anchor Height/Adapt width adjust height
Set the orientation of text and graphics on the page.
Portrait* Reverse portrait/Reverse portaint
Set the paper feeder for all print jobs.
Box [x] (1*) Manually supplying envelope manual
Specify the paper size or type of paper that will be inserted into the relevant source.
Box [x] (1*) Manually supplying envelope manual
Set the printer to replace one specified paper format with another if the requested paper size is not inserted in any of the paper feeders.
From Letter/A4 All Listed*

Configuration Universal
Enter the unit of measurement for the paper format "Universal".
Adjusting the portrait width of the paper format "Universal".
3,00 bis 14,17 Zoll (8,50*) 76-360 mm (216*)
Adjusting the portrait height of the paper format "Universal".
3,00 bis 14,17 Zoll (14*) 76-360 mm (356*)
Set the printer to pull in paper over either the short edge or long edge.
K. Edge* Long edge
Assign a name to the scan size and configure the scanning settings.
1 to 8.5 inches (8.50*) 25-216 mm (216*) height
1 to 14 inches (14*) 25-356 mm (297*) alignment
Portrait format* landscape 2 scans per page Off* On

Normal paper Cards Recycled Paper Glove Labels Fine Post envelope Letter sheet Pre-printed Colour Paper Light Paper Heavy Paper Rough/Cotton
Indicate the structure, weight and orientation of the inserted paper.
Improve the output result based on the contents of the original document.
Text/Photo* Photo Graphics
Set the scanning behavior based on the original document.
One-sided – one-side - two-side
Indicates whether copies are printed in color.
Specify the number of images to be printed on a page of one sheet of paper.
From* 2 pages portrait format 4 pages portation format 2 pages landscape format 4 sides
When printing multiple pages on a sheet, place a frame around each individual image.

Print multiple copies in a row.
Aus [1,1,1,2,2,2] An [1,2,1,2,1,2]*
"Copying" of size [List of paper formats]
Set the paper format of the original document.
Enter the paper feed for the copy job.
Manual feeding of the product
1 to 9 (5*) Adjust the coverage of the scanned image.
1–9999 (1*) Determine the number of copies.
Adjust the color intensity when scanning.
-4 to 4 (0*) magenta for green
-4 to 4 (0*) Yellow to Blue
-4 bis 4 (0*)
Set the amount of color that the printer recognizes on the original document.
Indicates the contrast of the output document.
Adjusts the visible background on a scanned image.
‑4 bis 4 (0*)
Scan from edge to edge
Allows scanning the original document from edge to edge.

Print copies in color.
Allow storage as a short dial
Saves custom copy settings as shortcuts.
Select a fax mode.
General fax settings
Fax name Identify your Fax Device.
Fax number Identify your Fax Number.
Notify fax recipients of your fax name or number.
Assign a certain amount of internal printer memory to the fax function.
Mainly received to the same extent*Mainly sent Only for sending
Cancel outgoing faxes before they are sent, or cancel incoming faxs before the printing process is complete.

Let the phone number of the fax sender be displayed.
Set the format for encrypting an outgoing fax number.
From the left to the right
0-58 (0*) Specifies the number of digits to be encrypted in an outgoing fax.
Activate detection for connected line
Determine if a phone line is connected to the printer.
Optimising fax compatibility Configure the printer fax function for optimum compatibility with other fax machines.
Set the resolution of the scanned image.
Fine Superfine Ultra Fine
Specify the size of the original document.
Improve the output result based on the contents of the original document.
Text* Text/Photo Photo Graphics
1–9 (5*) Adjust the coverage of the scanned image.
Set up the printer to dial the fax number without waiting for the dial.

Specify the dial mode for incoming or outgoing faxes.
Adjust the color intensity when scanning.
-4 to 4 (0*) magenta for green
-4 to 4 (0*) Yellow to Blue
-4 bis 4 (0*)
Specify the contrast of output.
Adjusts the visible background on a scanned image.
‑4 bis 4 (0*)
Scan from edge to edge
Allows scanning the original document from edge to edge.
0–9 (5*) Adjust the number of dial repetition attempts based on activity levels of receiving fax machines.
1–8 (3*) Increase the time between election repetition attempts and thus also the chance for successful fax shipping.
Activate error correction mode for fax jobs.

Fax files that have been scanned on the printer.
Allow the printer driver to send fax jobs.
Allow storage as a short dial
Saves fax numbers as shortcodes in the printer.
Set the maximum speed for fax shipping.
33600* 14400 9600 4800 2400
Activate color scanning for faxing.
Default Deactivated*Default Activated Never Use Always Use
Colour faxes autom. Convert to S/W fax
Converts all outgoing colored faxes to black and white.
Confirm the fax number
Ask the user to confirm the fax number.
Pre-selection Enter a prefix.
1–25 (3*) Set the number of call signs for incoming faxes.
Adjust the size of incoming faxes to the side.
Specify the paper feeder for printing incoming faxes.

Printing paper on both sides.
Set whether to insert empty separators.
No * Before the order After the order
Determines from which paper feed the separating side is supplied.
Prints the transmission information of an incoming fax at the end of each page.
Print the timestamp at the end of each page of an incoming fax.
Configure the printer for receiving faxes.
Set the printer to receive fax messages in color.
Have the number from which incoming fax is sent appear.
Lock incoming faxes from devices without specifying the Station ID or Fax ID.
Set a unique ring tune for incoming fax messages.
All call tones* Single ring sound only Double ring tone Only triple ring signs Just single or double ring tone Only Single or triple calls
Autom. Response
Configure the printer for automatic fax reception.

0–9 (9*) Manually enter a code via the phone keyboard to accept faxes.
Specify whether received faxes should be forwarded.
Print and forward Forward*
Specify where received faxes should be forwarded.
Objective 1 Objective 2
Set the maximum speed for fax transmission.
33600* 14400 9600 4800 2400
Set how often the printer should create a transfer protocol.
Always* Never Only for Mistakes
Print or send a protocol for successful fax transmissions. Transmission error.
Print a log for errors when receiving faxes.
Never print* When errors are made
Print all fax activities.

Specify the paper feeder used for printing protocols.
Identify the sender by remote fax name or fax number.
Show a summary of all fax jobs.
Show a summary of the fax dial-up history.
Set the mode for fax speaker.
Always from always one to connected*
Adjust the volume of your fax speaker.
Activate the ringing volume.
Primary SMTP gateway Enter the primary SMTP gateway or hostname of the primary smtp server for email delivery.
1-65535 (25*) Enter the connection number of the primary SMTP server.
Secondary SMTP gateway Enter the server IP address or hostname of your secondary or backup SMTP server.

1-65535 (25*) Enter the connection number of your secondary or backup SMTP server.
5-30 seconds (30*) Set the time before the printer's time limit expires if the SMTP server does not respond.
Reply to In the e-mail, provide a reply address.
Always use the default response address in the "SMTP server" field.
Specify whether the email should be sent via an encrypted link.
Request a trusted certificate when accessing the SMTP server.
Set the authentication type for SMTP server.
No authentication required* Sign-up/Normal NTLM CRAM‐MD5 Digest–MD5
Device-initiated email
Specify whether device-initiated emails require authentication information.
Do not use * SMTP login information of the device
Device user ID Enter the user ID and password for connecting to SMTP server. Device password
NTLM domain Enter the domain name for the NTLM security protocol.
Error "SMTP Server not set up" deactivate
Hide the error message SMTP server not set up Off.
Subject Enter the email subject and message.
File name Enter the file name for the scanned image.

Enter the output format for the scanned image.
PDF (.pdf)* TIFF (.tif) JPEG (.jpg)
Set the PDF format of the scanned image.
1.3 1.4 1.5* 1.6 1.7 Archiving version
A-1a*A-1b Secure
From * An Archival (PDF/A)
Improve the output result based on the contents of the original document.
Text/Photo* Photo Graphics
Set the color when scanning an image.
Black and white grey color* car
Set the resolution of the scanned image.
75 dpi 150 dpi* 200 dpi 300 dpi 400 dpi 600 dpi
1–9 (5*) Adjust the coverage of the scanned image.
Set the paper format of the original document.

Adjust the color intensity when scanning.
-4 to 4 (0*) Magenta – Green
-4 to 4 (0*) Yellow – Blue
-4 bis 4 (0*)
Set the amount of color that the printer recognizes on the original document.
1 bit* 8 bits*
Indicates the contrast of the output document.
Best setting for content* 0 1 2 3 4 5
Adjusts the visible background on a scanned image.
‑4 bis 4 (0*)
Scan from edge to edge
Allows scanning the original document from edge to edge.
Max. Email size
0–65535 (0*) Set the maximum allowed file size for each email.
Size error message Set an error message that the printer sends when an email exceeds the allowed file size.

Send a copy of the email to yourself.
Never displayed* By default to Always enabled by default
5–95 (75*) Set the quality of text on a scanned image.
5–95 (75*) Set the quality of text or photos on a scanned image.
5–95 (50*) Set the quality of photos on a scanned image.
Print a protocol for successful email transmission.
Print protocol* Don't print log Only if you have an error
Specify the paper feeder used for printing protocols.
Allow storage as a short dial
Saves email addresses as shortcodes.
Reset email information after sending
Recover the standard email information after you send an email.
Enter the output format for the scanned image.
PDF (.pdf)* TIFF (.tif) JPEG (.jpg)

Set the PDF format for the scanned image.
1.3 1.4 1.5* 1.6 1.7 Archiving version
A-1a*A-1b Secure
From * An Archival (PDF/A)
Improve the output result based on the contents of the original document.
Text/Photo* Graphics Photo
Set the color when scanning an image.
Black and white grey color* car
Set the resolution of the scanned image.
75 dpi 150 dpi* 200 dpi 300 dpi 400 dpi 600 dpi
1–9 (5*) Adjust the coverage of the scanned image.
Set the paper format of the original document.
File name Enter the file name of the scanned image.

Adjust the color intensity when scanning.
-4 to 4 (0*) Magenta – Green
-4 to 4 (0*) Yellow – Blue
-4 bis 4 (0*)
Set the amount of color that the printer recognizes on the original document.
1 bit* 8 bits*
Indicates the contrast of the output document.
Best setting for content* 0 1 2 3 4 5
Adjusts the visible background on a scanned image.
‑4 bis 4 (0*)
Scan from edge to edge
Allows scanning the original document from edge to edge.
5–95 (75*) Set the quality of text on a scanned image.
5–95 (75*) Set the quality of text or photos on a scanned image.
5–95 (50*) Set the quality of photos on a scanned image.

Print a protocol for successful FTP scan transmission.
Print protocol* Don't print log Only if you have an error
Specify the paper feeder used for printing FTP protocols.
Enter the output format for the scanned image.
PDF (.pdf)* TIFF (.tif) JPEG (.jpg)
Set the PDF format for the scanned image.
1.3 1.4 1.5* 1.6 1.7 Archiving version
A-1a*A-1b Secure
From * An Archival (PDF/A)
Improve the output result based on the contents of the original document.
Text/Photo* Graphics Photo

Set the color when scanning an image.
Black and white grey color* car
Set the resolution of the scanned image.
75 dpi 150 dpi* 200 dpi 300 dpi 400 dpi 600 dpi
1–9 (5*) Adjust the coverage of the scanned image.
Set the orientation of text and graphics on the page.
Set the paper format of the original document.
File name Enter the file name of the scanned image.
Adjust the color intensity when scanning.
-4 to 4 (0*) magenta for green
-4 to 4 (0*) Yellow to Blue
-4 bis 4 (0*)
Set the amount of color that the printer recognizes on the original document.
1 bit* 8 bits*

Indicates the contrast of the output document.
Best setting for content* 0 1 2 3 4 5
Adjusts the visible background on a scanned image.
‑4 bis 4 (0*)
Scan from edge to edge
Allows scanning the original document from edge to edge.
5–95 (75*) Set the quality of text on a scanned image.
5–95 (75*) Set the quality of text or photos on a scanned image.
5–95 (50*) Set the quality of photos on a scanned image.
1–9999 (1*) Specify the number of copies.
Enter the paper feed for the print job.
Box [x] (1*) Paper manual envelope manual
Print in color.
Print multiple copies in a row.
(1,1,1) (2,2,2) (1,2,3) (1,2,3)*

Indicate whether the paper is to be printed on one or two sides.
Determines which side of the paper (long edge or short edge) is bound when printed on two sides.
Long edge* Short edge
Print multipage images on a sheet of paper.
From* 2 sheets per page 3 leaves per side 4 sheetsper page 6 sheetsPer page 9 sheets Per page 12 sheets/page 16 sheets
Pages per page (arrangement)
When multipage printing, set the position of page images if you use pages per page.
Horizontal* Reverse horizontally Inverted vertically
Pages per page (orientation)
When multipage printing, set the orientation of documents if you use pages per page.
Pages per page (edge)
Print a frame around each page image when using pages per page.
Set whether to insert empty separators.
From* Between Copies between Orders Between Pages
Determines from which paper feed the separating side is supplied.
Specify whether blank pages should be printed into a print job.

Indication of the type of network connection.
Auto* [List of Network Cards]
Network status View the printer's network status and connectivity settings.
Displaying the network status on the printer
Display the network status on display.
Speed, duplex Display the speed of the currently active network card.
IPv4 Displaying the IPv4 address.
All IPv6 addresses View all IPv6 addresses.
Reset all active network connections on the printer.
Set the time period before the printer cancels a network printing job.
From On (90 seconds)
Printing a cover page.
Connection area for scanning to PC
9751:12000* Specify a valid connection area for printers protected by firewalls that block ports.
Activate or deactivate all network connections.

Installation with mobile app Configure the Wi-Fi connection with Lexmark Mobile Assistant.
Specify which WLAN the printer should be connected to.
Select network Add Wi-Fi network
Wid‑Fi Protected Setup
Set up a WLAN and activate network security.
Press-button method starts by entering a PIN
Select this setting if you want the printer to connect directly with Wi-Fi devices.
802.11b/g/n (2.4 GHz)* Specify the WLAN standard for the Wi-Fi.
Select the security type to connect the printer with wireless devices.
Deactivated* WEP WPA2/WPA personnel WPA2-Person 802.1x - RADIUS
Set which type of Wireless Encryption Protocol (WEP) the printer should use.
Determine WFP keys Set a WEP password for a secure WLAN connection.
Activate WLAN security using WPA2.

Determination of PSK Set the password for a secure WLAN connection.
Activate WLAN security using the WPA2/WPA.
802.1x encryption mode WPA+ WPA2*
Activate WLAN security with the standard option 802.1x.
Dynamic Host Configuration Protocol (DHCP).
Enter the static IP address of the printer.
Activates IPv6 in the printer.
Activates DHCPv6 in the printer.
Using this option, set the network adapter to accept the automatic IPv6 address configuration entries provided by a router.
Enter the DNS server address.
Assign the IPv6 address.
Assign the address of the IPv6 router.
Enter the address code.
View all IPv6 addresses.

Allow all IPv6 router addresses to be displayed.
Displays the network addresses.
Configure the printer to automatically switch to PCL emulation regardless of the standard language used by the printers if a printing job requires it.
Configure the printer to automatically switch to PS emulation regardless of the default language of the printers if a printing job requires it.
Configures the printer for processing binary Macintosh PostScript printing jobs.
Network speed Have the speed of an active Wi-Fi adapter displayed.
Dynamic Host Configuration Protocol (DHCP).
Enter the static IP address of the printer.
Activates IPv6 in the printer.

Activates DHCPv6 in the printer.
Using this option, set the network adapter to accept the automatic IPv6 address configuration entries provided by a router.
Enter the DNS server address.
Assign the IPv6 address.
Assign the address of the IPv6 router.
Enter the address code.
Allow all IPv6 addresses to be displayed.
Allow all IPv6 router addresses to be displayed.
Have the printer's Media Access Control (MAC) addresses displayed: The Locally Administered Address, LAA and Universally Administrated Address (UAA).
Configure the printer to automatically switch to PCL emulation regardless of the standard language used by the printers if a printing job requires it.
Configure the printer to automatically switch to PS emulation regardless of the default language of the printers if a printing job requires it.

Configures the printer for processing binary Macintosh PostScript printing jobs.
Reduce power consumption if the printer does not receive data from the Ethernet network.
Setting up hostnames Set the current TCP/IP hostname.
Domain axes Set the domain name.
Allow NTP server to be updated by DHCP/BOOTP
Allow the DHCP/BOOTP clients to update the printer’s NTP settings.
Name for configuration-free solution Enter a service name for the Zeroconf network.
Automatically assign an IP address.
DNS address Enter the server address of the current domain name system (DNS).
Replacement DNS address Enter the replacement DNS server addresses.
Domain search sequence Enter a list of domain names to find the printer and its resources that are in different domains on the network.

Update the dynamic DNS settings.
DDNS-TTL Specify the current DDNS settings.
Update the multicast DNS settings.
WINS address Enter a server address for the Windows Internet Name Service (WINS).
Have the BOOTP assign a printer IP address.
Limited server list Enter an IP address for the TCP connections.
Options for the restricted server list
Set how the IP addresses in the list can access the printer function.
Block all ports* Lock Print only, and lock HTTP
MTU Set a Maximum Transmission Unit (MTU) parameter for TCP connections.
1-65535 (9100*) Enter a Raw port number for printers on a network.
Outbound traffic – maximum speed
Activate the maximum transfer rate of the printer.
Activate TLSv1.0
Activate the TLSv1.0 protocol.
Activate TLSv1.1
Activate the TLSv1.1 protocol.
SSL digit list Set the encryption algorithms that you want to use for SSL or TLS connections.

SNMP versions 1 and 2c
Configure versions 1 and 2c of the Simple Network Management Protocol (SNMP) for installing printer drivers and applications.
Allow from on* SNMP setting
Activate from an AÜP-MIB
Configure version 3 of the SNMP to install and update printer security.
Set from One* login information with read/write protected
Username Password Set login information with read access
No authentication, no data protection authentication and no privacy authentication*

Activate the IP Security Protocol (IPSec).
Set up the IPSec basic configuration.
Set the IPSec encryption.
modp2048 (14)* modp3072 (15) modp4069 (16) modp6144 (17)
1 2 4 8 24*
Duration IPSec SA (hours)
1 2 4 8* 24
Specify the encryption and authentication methods to establish a secure connection.
IPSec Device Certificate Provide an IPSec certificate.

Intermediate common key authenticated links
Configure the authenticated connections of the printer.
Certificate-Authenticated Connections
Allow the printer to connect to networks that require authentication before access.
0-65535 seconds (90*) Set an automatic shutdown value so that the LPD program does not wait unlimited time for hanging or invalid print jobs.
Print out a cover page for all LPD print jobs.
Print a following page for all LPD print jobs.
Activate "Wagon Return Conversion".

Access the embedded web server to monitor and manage the printer.
Configure the settings for HyperText Transfer Protocol Secure (HTTPS) protocol.
Set the printer to use HTTPS connections.
Send files with FTP.
Local domains Enter domain names for HTTP and FTP servers.
IP address - HTTP proxy Configure the HTTP and FTP server settings.
1-299 (30*) Set the time period before the server stops connection.
Set the number of dial-up attempts on the HTTP/FTP server.
Configures the printer to switch to PCL emulation regardless of the standard language of the printers when a printing job received via USB port requires it.

Configures the printer to switch to PS emulation regardless of the standard language of the printers when a printing job received via USB port requires it.
Configures the printer for processing binary Macintosh PostScript printing jobs.
Activate the standard USB port.
Restrict access to network sites
External network address Enter the network addresses with restricted access.
Email address for notification Provide an email address for sending logged events.
1-300 (10*) Specify the network query interval in seconds.
Register the printer on Google Cloud Print Server.
Print directly from your Google account.
Google Cloud Print Activation

Allow the registered user and other users to locally send print jobs to the printer on the same subnet.
Check the authenticity of your peer certificate for a connection to your Google account.
Set the printer to process files as an image so it will print faster.
Always print as a picture
SSID Enter the service set identifier (SSID) of the Wi‐Fi network.
Setting pre-shared keys For the pre-shared key, set authentication and validation of users over a Wi-Fi connection.
PSK a. Installations NB
Display the pre-shared key on a network configuration page.
IP address of the group owner Enter the IP address of the group owner.
Pressing button requirements autom. Best.
Accept requests to automatically connect to the network.

Public
Control access to the printer functions.
Access to stopped print jobs Canceling orders on device language change Internet Printing Protocol (IPP) S/W printing color
Control access to printer menus.
"Security" menu "Network/connections" Menu "Paper" Menue "Reports" Functional configuration menus Menu “Consumption material” SE-Menu device menu
Control access to the printer’s management options.
Remote Management Firmware Updates All Settings Import/Export Delete from Operation
Create local accounts to manage access to the printer functions.
Username/password username password PIN

Control the access of groups or users to printer functions, applications and security settings.
Function access Management menus Device management All users
Function access Management menus Device management admin
Set the default values for generated certificates.
Common name Name of the organization Departmental name Land/Region Federal State Place Alternative name
Generate, delete or display device certificates.
Manage CA certificates Load, delete or display CA certificate.
1–10 (3*) Set the number of failed login attempts before the user is locked.
1–60 min. (5*) Set the time period between failed login attempts before the user is locked.
1–60 min. (5*) Set the duration of the block.
1–120 min. (10*) Set the delay for a remote login before automatically signing out of the user.

Max. Invalid PINs
2–10 (0*) Limit the number of invalid PIN inputs.
Expiry date for confidential contracts
Set the expiration period for confidential printing.
1 hour 4 hours 24 hours 1 week
Set the time limit for a print job that you want to repeat.
1 hour 4 hours 24 hours 1 week
Time limit for orders to be reviewed
Set the expiration period so that the printer will print a copy for the user to check quality before printing any remaining copies.
1 hour 4 hours 24 hours 1 week
Time limit for stored orders
Set the time limit for storing print jobs that can only be printed later.
1 hour 4 hours 24 hours 1 week
Requirement to hold all orders
Set the printer to stop all printing jobs.
Allow the storage of documents with the same filename.

Delete all files in the printer memory.
Ensure that the user must log in before printing.
Application for standard printing range Set the default application for print permission.
0–32 (0*) Enter the minimum number of characters allowed for a password.
Menu settings page Print a report that includes the printer menus.
Device information Print a report that contains information about the printer.
Equipment statistics Print a report that contains information about the use of the printer and consumable status.
Profile list Print a list of profiles stored in the printer.
Stock report Print a report with inventory information such as the printer serial number and model name.
printing patterns and font information available in any printer language.

All shortcode numbers Print a report that lists the shortcode numbers stored in the printer. Fax short numbers
Fax order protocol Print a report on the 200 last completed fax orders.
Fax call protocol Prints a report on the last 100 unanswered, received and blocked calls.
Print a page that shows the configured network and Wi-Fi settings on the printer.
Wi-Fi Direct Connected Clients
Print a page that lists all devices connected to the printer via Wi-Fi Direct.
Print pages for the quality test Print test pages to identify and fix print quality defects.
Cleaning the scanner Print out the instructions for cleaning the scanner.

Maintenance of the printer 111
Checking the status of printer consumable materials and parts
1 Touch on the home screen Status/Material.
2 Select the part or consumable you want to inspect.
1 Open a web browser and enter the printer’s IP address in the address field.
2 Click Settlements > Equipment > Notifications.
3 From the menu "Material" on Custom material notifications Click.
4 Select a notification for each consumable.
5 Apply the changes.
Set up the printer to send email notifications when consumables are almost used up or paper is replaced, re-inserted and/or reloaded. The paper must be removed.
1 Open a web browser and enter the printer’s IP address in the address field.
2 Click on it Settlements > Equipment > Notifications > E‑Mail alarm deviceThen configure the settings.

Maintenance of the printer 112
3 Click on it Set up email lists and alertsThen configure the settings.
4 Apply the changes.
Reports can be viewed via the embedded web server. These reports provide helpful information about the printer status, network and consumables.
1 Open a web browser and enter the printer’s IP address in the address field.
2 Click on it Reports, and then to the report type you want to view.
In the United States, you can find information about Lexmark consumable authorized dealers in your area at 1-800-539-6275. Information for other countries or regions can be found under www.lexmark.com Or, contact the dealer from whom you purchased the printer.
Optimal operation of your Lexmark printer can only be guaranteed with original parts and consumable materials from Lex mark. The use of consumables or third-party parts could affect the performance, reliability or lifetime of the printer and its image components. In addition, the guarantee cover is affected. Damage caused by the use of consumable materials or third party parts will not be covered by the warranty. All lifetime indicators are designed to use Lexmark consumables and parts. Using consumables or third-party parts can lead to unpredictable results. If image components are used longer than intended, the Lexmark printer or corresponding components can be damaged as a result.
Warning—Possible damage: Consumable materials and parts without conditions of the return program can be reset and reprocessed. However, the manufacturer’s warranty does not cover damage caused by non-original consumable materials or parts. Back to it. the counter to the verbr.mat. or part without proper order. Aufber. It can become a besh. of the printer. After the return. d. Verbr.mat. or part, the printer may have errors to the presence d. back. Display elements.

Maintenance of the printer 113

Further information on individual countries in the respective region can be found at www.lexmark.com/regions.
Lexmark MC3224 and MC3326 return cartridges


Maintenance of the printer 114

Lexmark MC3326 standard high-capacity cartridges
Ordering a residual toner container

Maintenance of the printer 115
1 Open the front flap, and then slide it down tightly.

2 Pull out the compartment of the print cartridge.


Maintenance of the printer 116
3 Take out the used-up ink cartridge.

4 Unpack a new cartridge.


Maintenance of the printer 117
5 Insert the new printing cartridge.

6 Insert the compartment of the cartridge and close the flap.
1 Take out the old residual toner container.

2 Take the new residual toner container out of the packaging.

Maintenance of the printer 118
3 Insert the new residual toner container.

1 Remove the used compartment.

2 Take the new compartment out of packaging.
3 Put the new subject in.


Maintenance of the printer 119
1 Pull the tray out.

2 Take out the used manual feed.

3 Take the new manual feed out of packaging.
4 Use the new manual feed.

5 Push the tray into the printer.

Maintenance of the printer 120
1 Open the ADZ cover.


Maintenance of the printer 121
2 Remove the used ADZ tray.

3 Take the new ADZ compartment out of its packaging.

Maintenance of the printer 122
4 Use the new ADZ tray until it latches audibly.

5 Close the ADZ cover.
1 Turn off the printer.
2 Remove the power cord from the socket and subsequently from the printer.

Maintenance of the printer 123
3 Open the front flap, and then slide it down tightly.
4 Pull out the compartment of the print cartridge.
5 To avoid toner contamination, place a sheet of paper on top of the compartment of the cartridge and then insert it.

6 Close the front flap.

Maintenance of the printer 124
7 Pull the tray out.
8 Put the printer on the side.


Maintenance of the printer 125
9 Take out the used intake rollers.

10 Take the new intake rollers out of the packaging.

Maintenance of the printer 126
11 Use the new intake rollers.

12 Place the printer properly, and then slide in the tray.
13 Open the front flap, and then slide it down tightly.
14 Pull out the compartment of the print cartridge.
15 Remove the paper, and subsequently insert the compartment of the cartridge.
16 Close the front flap.
17 Connect the power cord to the printer and then connect it to a socket.
18 Turn on the printer.

Maintenance of the printer 127
1 Open the ADZ cover.
2 Remove the used ADZ separating pad.

3 Take the new ADZ scan edition out of its packaging.

Maintenance of the printer 128
4 Insert the new separating pad until it latches audibly.

5 Close the ADZ cover.

Maintenance of the printer 129
1 Navigate to the control panel:
Settlements > Equipment > Maintenance > Config. menu > Consumables and meters
2 Select the consumable meter that you want to reset.
Warning—Possible damage: Consumable materials and parts without conditions of the return program can be reset and reprocessed. However, the manufacturer’s warranty does not cover damage caused by non-original consumable materials or parts. Resetting the counters to the consumable or part without proper preparation may cause damage to the printer. After the consumable or part counter is reset, the printer can indicate errors about the presence of the reset element.
1 Turn off the printer and unplug the power cord from the socket.
2 Remove paper from the standard filing.
3 Remove dust, lint and paper pieces on the printer with a soft brush or vacuum cleaner.
4 Wipe the outside of the printer with a damp, soft, floss-free cloth.
5 Connect the power cord to the socket and turn on the printer.

Maintenance of the printer 130
1 Open the scanner cover.

2 Clean the following areas with a moistened soft, lint-free cloth: • ADZ glass



Maintenance of the printer 131


3 Close the scanner cover.
1 Tap on the home screen Settlements > Equipment > Energy management > Eco-mode.
2 Select a setting.
1 Tap on the home screen Settlements > Equipment > Energy management > Time-barriers > Eco-mode.
2 Select a time period that the printer should wait until energy-saving mode is activated.

Maintenance of the printer 132
1 Tap on the home screen Settlements > Equipment > Energy management > Time-barriers > Sleep mode time-off.
2 Select a time period that the printer should wait until activation of sleep mode.
1 On the Home screen, press on the option Settlements > Equipment > Preset settings > Screen brightness.
2 Adjust the setting.

Maintenance of the printer 133
Instructions for transport can be found at http://support.lexmark.com, or contact the responsible customer service.

Fixing an issue 134
The printer does not respond
Step 1 Check if the power cable is connected to the source of electricity.
The problem has been resolved.
Go to step 2.
Step 2 Check if the power supply is interrupted by a circuit breaker or another switch.
Turn on the power button or reset the circuit breaker.
Go to step 3.
Is the power supply interrupted by a circuit breaker or another switch?
Go to step 4.
Turn on the printer.
Check if the printer is on.
Is the printer on?
Press the power button to turn on the printer again.
Go to step 5.
Check if the printer is in sleep or energy-saving mode.
Is the printer in sleep or energy-saving mode?
Go to step 6.
Plug the cables into the right connections.
Check that the cables connecting the printer and computer are plugged into the correct ports.
Are the cables plugged into the right connections?
Step 6 Install the correct printer driver.
The problem has been resolved.
Go to step 7.
Step 7 Turn the printer off, wait for about 10 seconds and then turn it back on.
The problem has been resolved.
Contact them. Customer service.

Fixing an issue 135
Step 1 Check if the printer is on.
Go to step 2.
Turn on the printer.
Is the printer on?
Step 2 Make sure the printer’s IP address is correct.
Go to step 3.
Enter the correct IP address of the printer in the address field.
Find the printer’s IP address:
Is the printer's IP address correct?
Go to step 4.
Install a supported browser.
Check if you have a supported browser:
Is your browser supported?
Step 4 The network connection must be active.
Go to step 5.
Contact the system administrator.
Is the network connection active?
Step 5 Make sure that the cable connections to the printer and printing server are properly connected. Further information can be found in the documentation for your printer.
Go to step 6.
Check the cable connections.
Are the cables permanently connected?
Go to step 7.
Contact the system administrator.
Check if the web proxy servers are disabled.
Are the Webproxyservers deactivated?
Action Yes No · Step 3 · Step 6

Fixing an issue 136
The problem has been resolved.
Contact them. Customer service.
Access the embedded web server.
Is access to the Embedded Web Server successful?
Buy a cassette with the region matching your printer area or buy a worldwide valid casing to fix this problem.
Worldwide or undefined region 0
North America (USA, Canada) 1
European Economic Area, Western Europe, Nordic Countries, Switzerland 2
Asia and Pacific 3
Rest of Europe, Middle East and Africa 5
The printer has determined that consumable materials or parts are used which do not come from Lexmark.
Your Lexmark printer works best when using original consumable materials and original parts from LexMark. The use of consumables or third-party parts could affect the performance, reliability or lifetime of the printer and its image components.
All lifetime indicators are designed to use Lexmark consumables and parts. Using consumables or third-party parts can lead to unpredictable results. If image components are used longer than intended, the Lexmark printer or corresponding components can be damaged as a result.

Fixing an issue 137
If you take these risks and want to continue using consumables or parts in the printer that are not original, do one of the following:
Press twice for printer models with Tochscreen
Keep on printer models without a touchscreen X and pressed simultaneously for 15 seconds.
If you do not wish to accept these risks, remove consumables or third-party parts from the printer and place them on your computer. use original consumable materials or Lexmark parts. For more information, see "Using Lexmark Original Accessories and Consumption Materials" on page 112.
twice pressed, you press
twice, and reset the consumable meter.
For printer models without touch screen: If the printer is not printing after you X and hold for 15 seconds at the same time, reset the consumable counter.
1 Navigate to the control panel:
Settlements > Equipment > Maintenance > Configuration menu > Consumable and meters
For printer models without a touchscreen, press to navigate through the settings.
2 Select the part or the consumable, which is or Then you want to reset it, and then choose Start.
3 Read the warning message and select Continuation.
4 To delete the message, press twice for printer models with touchscreen
. Keep on printer models without a touchscreen X and pressed simultaneously for 15 seconds.
and then twice ·and after that twice

Fixing an issue 138
Properly insert paper Wrongly inserting paper




Fixing a problem 139

1 Automatic Document Feeder (ADZ)

Fixing an issue 140
1 Remove the compartment and manual feed.

2 Remove the jammed paper.

3 Use the manual feed and tray.
4 Open the rear flap.

Fixing an issue 141

5 Remove the jammed paper.

6 Close the door.

Fixing an issue 142
1 Remove the compartment and manual feed.
2 Remove the jammed paper.

3 Use the manual feed and tray.
1 Open the rear flap.

Fixing an issue 143
2 Remove the jammed paper from one of the following areas:


Fixing an issue 144


3 Close the door.

Fixing an issue 145
1 Remove all original documents from the ADZ tray.
2 Open the ADZ cover.
3 Remove the jammed paper.

4 Close the ADZ cover.

Fixing an issue 146
Go to step 2.
The problem has been resolved.
a Use an envelope that is in a dry environment
was stored.
Do the envelopes stick to each other when printing?
Contact them. Customer service.
The problem has been resolved.
a Make sure that the option "Paper grade" to "Envelope"
is set. Navigate to the control panel:
Settlements > Paper > Subject configuration > Paper size/grade b Send the print job.
Do the envelopes stick to each other when printing?
The problem has been resolved.
Go to step 2.
a Touch the option on the home screen Settlements >
Printing > Layout > Sorting. b Option "Sort".
c Print the document.
The pages sorted correctly printed?
The problem has been resolved.
Go to step 3.
a In the document you want to print, open the dialog box
"Printing." b Print the document.
The pages sorted correctly printed?
The problem has been resolved.
Contact them. Customer service.
a Reduce the number of pages to print. b Print the document.
The pages sorted correctly printed?

Fixing an issue 147
Paper jams are often involved.
Go to step 2.
The problem has been resolved.
a Pull the tray out. b Check that the paper is inserted correctly.
Do paper jams often occur?
Go to step 3.
The problem has been resolved.
a Navigate to the control panel:
Settlements > Paper > Subject configuration > Paper size/grade b Set the appropriate paper format and type of paper.
c Print the document.
Do paper jams often occur?
Contact them. Customer service.
The problem has been resolved.
a Insert paper from a new package.
Do paper jams often occur?
a Touch the option on the home screen Settlements >
The problem has been resolved.
Contact them. Customer service.
Equipment > Notifications > Restoring the dammed pages b Select One or Automatic.
c Apply the changes.
Are the jammed pages reprinted?

Fixing a problem 148
The problem has been resolved.
Go to step 2.
a Select the dialog window in the document to be printed
"Printing" and check if you have selected the correct printer. b Print the document.
Is the document printed?
The problem has been resolved.
Go to step 3.
a Check if the printer is on. b Fix any error messages that appear on the display
will become. c Print the document.
Is the document printed?
The problem has been resolved.
Go to step 4.
a Check if the connections are working and whether the cables
are properly connected to the computer and printer.
Further information can be found in the installation manual included with the printer. b Print the document.
Is the document printed?
The problem has been resolved.
Go to step 5.
a Turn off the printer, wait for about 10 seconds
Then turn the printer back on. b Print the document.
Is the document printed?
The problem has been resolved.
Contact them. Customer service.
a Remove the printer driver and reinstall it. b Print the document.
Is the document printed?

Fixing a problem 149
The problem has been resolved.
Go to step 2.
a Check on the control panel whether the documents in the list
suspended orders are listed.
Are the documents printed?
The problem has been resolved.
Go to step 3.
The print job may contain a formatting error or invalid data. Delete the print job and send it again.
Are the documents printed?
The problem has been resolved.
Contact them. Customer service.
a Delete some stopped jobs to printer memory
release. b Send the print job again.
Are the documents printed?
Step 1 Make sure the printer cable is securely connected to the printers and computer, printing servers, options or other networking device.
Go to step 2.
The problem has been resolved.
Does the printer print slowly?
Go to step 3.
The problem has been resolved.
a Make sure the printer is not in Eco mode or
silent mode.
Does the printer print slowly?

Fixing an issue 150
Go to step 4.
The problem has been resolved.
a Enter the print resolution depending on the operating system in
The "Print Settings" or "Printing" dialog box. b Set the resolution to 4800 CQ.
c Print the document.
Does the printer print slowly?
Go to step 5.
The problem has been resolved.
a Touch the option on the home screen Settlements >
Printing > Quality > Dissolution. b Set the resolution to 4800 CQ.
c Print the document.
Does the printer print slowly?
Go to step 6.
The problem has been resolved.
a Enter the paper type depending on operating system in the dialog box
"Printing Settings" or "Print".
Does the printer print slowly?
Go to step 7.
The problem has been resolved.
a Make sure that the printer settings are to paper structure
and paper weight are consistent with the properties of the loaded paper. Touch the option on the home screen Settlements > Paper > Media configuration > Printing media.
Does the printer print slowly?
Go to step 8.
The problem has been resolved.
Remove stopped orders.
Does the printer print slowly?

Fixing an issue 151
Contact them. Customer service.
The problem has been resolved.
a Make sure the printer is not overheating.
Does the printer print slowly?
Print quality is bad
Look for the image that matches your print quality issue, and then click on the link below to get instructions about how to solve it.




"Ghost Images" on page 155
"Empty or white pages" on page 152
"Only dark print" on page 153
"Gray or Colored Background" on page 156




"Miscellaneous Colors" on page 160
"False Edges" on page 157
"Too bright pressure" on page 158
"Specific Prints and Points" on page 161
Action Yes No · Step 8

Fixing an issue 152




"Paper is Waving" on page 163
"Shale or Distorted Expression" on page 164
"Full-surfaced color or black pictures" on page 165
"Cut text or pictures" on page 166




"Uneven coverage" on page 168
"Horizontal, Dark Lines" on page 169
"Toner is easy to wipe" on page 167
"Vertical, Dark Lines" on page 171



"Horizontal, White Lines" on page 172
"Vertical White Lines" on page 173
"Repetitive errors" on page 175


Fixing an issue 153
Printer models without touchscreen to navigate through the settings.
a Open the front door, and then push it tightly.
Contact them. Customer service.
The problem has been resolved.
Below. b Pull out the compartment of the pressure cassette.
c Remove the cartridges and insert them again.

d Insert the box of the printing cassette and close it.
the flap. e Print the document.
Does the printer output blank or white pages?

For printer models without a touchscreen, press to navigate through the settings.
Action Yes No

Fixing an issue 154
Go to step 2.
The problem has been resolved.
a Perform color adjustment.
Navigate to the control panel:
Settlements > Pressure > Quality > Extended image functions > Colour adaptation b Print the document.
Is the expression too dark?
Go to step 3.
The problem has been resolved.
a Reduce the toner job depending on the operating system in
The "Print Settings" or "Printing" dialog box.
Settlements > Printing > Quality > Toner deposition b Print the document.
Is the expression too dark?
Go to step 4.
The problem has been resolved.
a Enter the paper type depending on operating system in the dialog box
"Printing Settings" or "Print".
Is the expression too dark?
Go to step 5.
Continue with step 6.
Check if the paper has a textured or rough surface.
Do you print on structured or rough paper?
Go to step 6.
The problem has been resolved.
a Replace the structured or rough paper by
Standard paper. b Print the document.
Is the expression too dark?

Fixing an issue 155
Contact them. Customer service.
The problem has been resolved.
a Insert paper from a new package.
Is the expression too dark?

Printer models without touchscreen to navigate through the settings.
Go to step 2.
The problem has been resolved.
a Place the correct type of paper in the tray. b Print the document.
Do ghost images appear on the expression?
Go to step 3.
The problem has been resolved.
a Enter the paper type depending on operating system in the dialog box
"Printing Settings" or "Print".
Do ghost images appear on the expression?

Fixing an issue 156
Go to step 4.
The problem has been resolved.
a Make a color adjustment.
Navigate to the control panel: Settlements > Pressure > Quality > Extended image functions > Colour adjustment. b Print the document.
Do ghost images appear on the expression?
Contact them. Customer service.
The problem has been resolved.
a Open the front door, and then push it tightly.
Below. b Pull out the compartment of the print cartridge.
c Remove the cartridges and insert them again.
d Insert the cartridge compartment and close it.
the flap. e Print the document.
Do ghost images appear on the expression?

Printer models without touchscreen to navigate through the settings.
Action Yes No · Step 3 · Step 4

Fixing an issue 157
Go to step 2.
The problem has been resolved.
a Make a color adjustment.
Navigate to the control panel:
Settlements > Pressure > Quality > Extended image functions > Colour adjustment. b Print the document.
Is there a gray or colored background on the printouts?
Contact them. Customer service.
The problem has been resolved.
a Open the front door, and then push it tightly.
Below. b Pull out the compartment of the print cartridge.
c Remove the cartridges and insert them again.
d Insert the cartridge compartment and close it.
the flap. e Print the document.
Is there a gray or colored background on the printouts?

The problem has been resolved.
Go to step 2.
a Slide the paper guides into the one for the inserted paper
intended position. b Print the document.
Are the edges right?

Fixing an issue 158
The problem has been resolved.
Go to step 3.
a Set the paper size from the control panel. Change them
to: Settlements > Paper > Subject configuration > Paper size/grade b Print the document.
Are the edges right?
The problem has been resolved.
Contact them. Customer service.
a Enter the paper size depending on operating system in the dialog box
"Printing Settings" or "Print".
Are the edges right?

Printer models without touchscreen to navigate through the settings.
Go to step 2.
The problem has been resolved.
a Perform color adjustment.
Navigate to the control panel: Settlements > Pressure > Quality > Extended image functions > Colour adjustment. b Print the document.
Is the expression pale?

Fixing an issue 159
Go to step 3.
The problem has been resolved.
a Increase the toner order depending on the operating system in
The "Print Settings" or "Printing" dialog box.
Is the expression pale?
Go to step 4.
The problem has been resolved.
a Deactivate the color saving mode.
Navigate to the control panel:
Settlements > Printing > Quality > Colour saving mode. b Print the document.
Is the expression pale?
Go to step 5.
The problem has been resolved.
a Enter the paper type depending on operating system in the dialog box
"Printing Settings" or "Print".
Is the expression pale?
Go to step 6.
Continue with step 7.
Check if the paper has a textured or rough surface.
Do you print on structured or rough paper?
Continue with step 7.
The problem has been resolved.
a Replace the structured or rough paper by
Standard paper. b Print the document.
Is the expression pale?

Fixing an issue 160
Go to step 8.
The problem has been resolved.
a Insert paper from a new package.
Is the expression pale?
Contact them. Customer service.
The problem has been resolved.
a Open the front door, and then push it tightly.
Below. b Pull out the compartment of the print cartridge.
c Remove the cartridges and insert them again.
d Insert the cartridge compartment and close it.
the flap. e Print the document.
Is the expression pale?

Printer models without touchscreen to navigate through the settings.
Action Yes No · Step 7 · Step 8

Fixing an issue 161
a Open the front door, and then push it tightly.
Contact them. Customer service.
The problem has been resolved.
Below. b Pull out the compartment of the print cartridge.
c Remove the empty cartridge and put it
Then a new one for the missing color.
d Insert the cartridge compartment and close it.
the flap. e Print the document.
Are there any colors missing from the printout?

Printer models without touchscreen to navigate through the settings.
Action Yes No

Fixing an issue 162
Step 1 Check the printer for leaked toner contamination.
Go to step 2.
Contact them. Customer service.
Is the printer free of leaked toner?
Continue with step 4.
Go to step 3.
a Navigate to the control panel:
Settlements > Paper > Subject configuration > Paper format/grade b Check if the settings for paper format and
the type of paper corresponds to that inlaid.
Do the attitudes match?
Go to step 4.
The problem has been resolved.
a Enter paper format and type of paper depending on the operating system
in the "Print Settings" or "Printing" dialog box.
Is the expression blotchy?
Go to step 5.
The problem has been resolved.
a Insert paper from a new package.
Is the expression blotchy?

Fixing an issue 163
Contact them. Customer service.
The problem has been resolved.
a Open the front door, and then push it tightly.
Below. b Pull out the compartment of the print cartridge.
c Remove the cartridges and insert them again.
d Insert the cartridge compartment and close it.
the flap. e Print the document.
Is the expression blotchy?

Go to step 2.
The problem has been resolved.
a Bring the guides in the tray for the inserted paper into
The correct position. b Print the document.
Is the paper corrugated?

Fixing an issue 164
Go to step 3.
The problem has been resolved.
a Enter the paper type depending on operating system in the dialog box
"Printing Settings" or "Print".
Is the paper corrugated?
Go to step 4.
The problem has been resolved.
Print on the other side of the paper.
a Remove the paper, turn it over and put it
Then return to it. b Print the document.
Is the paper corrugated?
Contact them. Customer service.
The problem has been resolved.
a Insert paper from a new package.
Is the paper corrugated?

For printer models without a touchscreen, press to navigate through the settings.

Fixing an issue 165
Go to step 2.
The problem has been resolved.
a Bring the paper guides in the tray for the inserted paper
into the right position. b Print the document.
Is the expression skewed or distorted?
Go to step 3.
The problem has been resolved.
a Insert paper from a new package.
Is the expression skewed or distorted?
Contact them. Customer service.
The problem has been resolved.
a Check if the inserted paper is supported.
Is the expression skewed or distorted?

Printer models without touchscreen to navigate through the settings.

Fixing an issue 166
a Open the front door, and then push it tightly.
Contact them. Customer service.
The problem has been resolved.
Below. b Pull out the compartment of the print cartridge.
c Remove the cartridges and insert them again.
d Insert the cartridge compartment and close it.
the flap. e Print the document.
Does the printer output full-surface color or black images?

Printer models without touchscreen to navigate through the settings.
Go to step 2.
The problem has been resolved.
a Bring the paper guides in the tray for the inserted paper
into the right position. b Print the document.
Are text or pictures cut off?
Action Yes No · Action Yes No · Step 1

Fixing an issue 167
Go to step 3.
The problem has been resolved.
a Enter the paper format depending on the operating system in the dialog box
"Printing Settings" or "Print".
Are text or pictures cut off?
Contact them. Customer service.
The problem has been resolved.
a Open the front door, and then push it tightly.
Below. b Pull out the compartment of the pressure cassette.
c Remove the cartridges and insert them again.
d Insert the box of the printing cassette and close it.
the flap. e Print the document.
Are text or pictures cut off?

For printer models without a touchscreen, press to navigate through the settings.
Action Yes No · Step 2 · Step 3

Fixing an issue 168
Go to step 2.
The problem has been resolved.
a Enter the paper type depending on operating system in the dialog box
"Printing Settings" or "Print".
Does the toner rub off easily?
Go to step 3.
The problem has been resolved.
a Check if the paper weight is supported.
Does the toner rub off easily?
Contact them. Customer service.
The problem has been resolved.
a Insert paper from a new package.
Does the toner rub off easily?

Printer models without touchscreen to navigate through the settings.

Fixing a problem 169
a Open the front door, and then push it tightly.
Contact them. Customer service.
The problem has been resolved.
Below. b Pull out the compartment of the print cartridge.
c Remove the cartridges and insert them again.
d Insert the cartridge compartment and close it.
the flap. e Print the document.
Is the coverage uneven?

Printer models without touchscreen to navigate through the settings. • If horizontal, dark lines are seen on the expression, read the topic “Repetitive Errors”.
Action Yes No

Fixing an issue 170
Go to step 2.
The problem has been resolved.
a Enter the paper type depending on operating system in the dialog box
"Printing Settings" or "Print".
Do dark lines appear on the expressions?
Go to step 3.
The problem has been resolved.
a Insert paper from a new package.
Do dark lines appear on the expressions?
Contact them. Customer service.
The problem has been resolved.
a Open the front door, and then push it tightly.
Below. b Pull out the compartment of the print cartridge.
c Remove the cartridges and insert them again.
d Insert the cartridge compartment and close it.
the flap. e Print the document.
Do dark lines appear on the expressions?

Fixing an issue 171

Printer models without touchscreen to navigate through the settings.
Go to step 2.
The problem has been resolved.
a Enter the paper type depending on operating system in the dialog box
"Printing Settings" or "Print".
Does the expression have vertical, dark lines?
Go to step 3.
The problem has been resolved.
a Insert paper from a new package.
Does the expression have vertical, dark lines?
Action Yes No · Step 1 · Step 2

Fixing an issue 172
Contact them. Customer service.
The problem has been resolved.
a Open the front door, and then push it tightly.
Below. b Pull out the compartment of the print cartridge.
c Remove the cartridges and insert them again.
d Insert the cartridge compartment and close it.
the flap. e Print the document.
Does the expression have vertical, dark lines?

Printer models without touchscreen to navigate through the settings. • If horizontal, white lines are visible on your expression, read the topic of “Repetitive Errors”.
Action Yes No · Step 3

Fixing an issue 173
Go to step 2.
The problem has been resolved.
a Enter the paper type depending on operating system in the dialog box
"Printing Settings" or "Print".
Does the expression have horizontal, white lines?
Contact them. Customer service.
The problem has been resolved.
a Open the front door, and then push it tightly.
Below. b Pull out the compartment of the print cartridge.
c Remove the cartridges and insert them again.
d Insert the cartridge compartment and close it.
the flap. e Print the document.
Does the expression have horizontal, white lines?

Printer models without touchscreen to navigate through the settings.
Action Yes No · Step 1 · Step 2

Fixing an issue 174
Go to step 2.
The problem has been resolved.
a Enter the paper type depending on operating system in the dialog box
"Printing Settings" or "Print".
Does the expression have vertical white lines?
Step 2 Check to see if you are using the recommended paper type.
Go to step 3.
The problem has been resolved.
a Place the recommended paper grade in the paper feeder. b Print the document.
Does the expression have vertical white lines?
Contact them. Customer service.
The problem has been resolved.
a Open the front door, and then push it tightly.
Below. b Pull out the compartment of the print cartridge.
c Remove the cartridges and insert them again.
d Insert the cartridge compartment and close it.
the flap. e Print the document.
Does the expression have vertical white lines?
Action Yes No · Step 1 · Step 3

Fixing an issue 175

Printer models without touchscreen to navigate through the settings.
a With test pages for print quality, measure the distance between
Measure the distance, and contact them. Customer service.
Measure the distance, and contact them. Customer service.
the repeat errors in the relevant color pages. b Check if the repetitive errors are
The following measurements apply:
Do the repeating errors apply to the following measurements?
1 Touch the option on the home screen Settlements > Printing > Quality > Extended image functions > Colour adjustment.
2 Select the option in the color adjustment menu Manual > Colour adjustment content Off.
3 Select the appropriate color conversion setting.

Fixing an issue 176
RGB color representation is a method of describing colours by the intensity of red, green and blue light used to produce a particular colour. Red, green and blue light can be superimposed at varying intensity to create a wide range of colors found in nature. Computer screens, scanners and digital cameras use this method to display color.
CMYK colour representation is a method of describing colors by the proportion of cyan, magenta, yellow and black used to render a given colour. Inks or toners in cyan, magenta, yellow and black can be printed in varying quantities to represent a wide range of colors found in nature. Inkjet printers, printing presses and color laser printers produce inks in this manner.
Software programs are used to color the document over RGB or CMYK colour combinations and to modify them. Further information can be found in the help of the software program.
When you print a document, information about the type and color of each object is sent to the printer and passed through color conversion tables. The ink is then converted into the corresponding amount of cyano, magenta, yellow and black toner which is necessary for producing the desired color. The respective application of the color conversion tables is determined by the object information. For example, a particular color conversion table can be applied to text while another color transformation table is applied to photos.

Fixing a problem 177
If manual color adjustment is enabled, the printer uses custom color conversion tables for object processing. Manual color correction settings depend on the type of object to be printed (text, graphics or images). They are also specific depending on the color specification of the object in the software program (RGB or CMYK combinations). How to apply another color conversion table manually can be found under "Change the Colors in Expression" on page 175.
If the software program does not use colors with RGB- or CMYK combinations are specified, activation of manual color adjustment is not recommended. It is not recommended even if the color adjustment by the software program or the chrominances are required. the operating system is controlled. Most documents will produce the preferred color when "Automatic Color Adjustment" is selected.
How do I get a certain color (e.g.) B. A color in a company logo?
The "Quality" printer menu can be used to select from nine different color sample templates. These templates are also accessible via the color sample page of the embedded web server. Selecting a template creates multi-page printouts consisting of hundreds of color fields. Each field contains a CMYK- or RGB combination, depending on the selected table. The color of the individual fields is determined by passing through the CMYK or chromosome values indicated on the field. RGB combination is generated by the selected color conversion table.
You can identify the field on the color pattern templates whose colour is most closely matched to the desired color. The color combination specified on the field can then be used to change object color in a software program. Further information can be found in the help of the software program. Manual color adjustment may be required to use the selected color conversion table for specific objects.
The choice of the color sample template for a particular color match problem depends on:
If the software program does not use colors with RGB- or CMYK combinations are specified, activation of manual color adjustment is not recommended. Some software programs match the RGB or . CMYK combinations by means of color management. In these cases, the printed ink may not correspond exactly to that on the sample colour pages.
Go to step 2.
The problem has been resolved.
Perform color adjustment.
a Touch the option on the home screen Settlements >
Printing > Quality > Extended image functions > Colour adjustment. b Print the document.
Does the expression appear discolored?
Action Yes No · Step 1

Fixing a problem 178
Contact them. Customer service.
The problem has been resolved.
Make a color balance.
a Touch the option on the home screen Settlements >
Printing > Quality > Extended image functions > Colour adjustment. b Adjust the settings.
c Print the document.
Does the expression appear discolored?
Contact your phone company and make sure that your telephone connection has a number identification.
The problem has been resolved.
Then they turn to him. Customer service.
Is the caller ID displayed?
Action Yes No · Step 2 · Action Yes No

Fixing a problem 179
Step 1 Fix any error messages that appear on the display.
The problem has been resolved.
Go to step 2.
Can you send or receive a fax?
The problem has been resolved.
Go to step 3.
Make sure the cable connections of the following devices are properly connected:
Can you send or receive a fax?
Step 3 Check if a dial is heard.
Go to step 5.
Go to step 4.
Do you hear a dial-up?
The problem has been resolved.
Go to step 5.
Check the phone jack on the wall.
a Connect the analog phone directly to the telephone jack. b Wait for the dial.
c If you do not hear the message, use another
Telephone cable. d If you still don't hear a dial, connect that.
Telephone cable with another telephone jack. e When you hear a sign, connect the printer to
this telephone socket.
Can you send or receive a fax?
Action Yes No · Step 2 · Step 4

Fixing an issue 180
The problem has been resolved.
Go to step 6.
Check if the printer is connected to an analog telephone service or with the correct digital connection.
Can you send or receive a fax?
Step 6 Temporarily disconnect other devices and deactivate other phone services.
The problem has been resolved.
Go to step 7.
a Disconnect other devices (such as answering machines, computer with
Modems or telephone cable splitters located between the printer and the phone line. b Deactivate the knock-on function and voicemail. Other
You can get information from your telephone company.
Can you send or receive a fax?
Step 7 Scan each page of the original document individually.
The problem has been resolved.
Contact them. Customer service.
a Select the fax number. b Scan the document.
Can you send or receive a fax?
Action Yes No · Step 5

Fixing an issue 181
Step 1 Place the original document properly in the automatic document feeder (ADZ) or on the scanner glass.
The problem has been resolved.
Go to step 2.
Can you send fax messages?
The problem has been resolved.
Contact them. Customer service.
Set up the short number properly.
Can you send fax messages?
Step 1 Make sure that paper is in the paper indent.
The problem has been resolved.
Go to step 2.
Can you receive fax messages?
Step 2 Check the settings of ringing delay.
The problem has been resolved.
Go to step 3.
Navigate from the control panel to:
Settlements > Fax > Fax standards > Analogue fax configuration > Fax receiving settings > Ringing sign
Can you receive fax messages?
Step 3 If the printer is printing blank pages, read "Empty or white pages" on page 152.
The problem has been resolved.
Contact them. Customer service.
Can you receive fax messages?
Action Yes No · Step 2 · Action Yes No

Fixing an issue 182
Step 1 Make sure the print quality has not deteriorated.
The problem has been resolved.
Go to step 2.
a Go to the operator console Settlements >
Detection of errors > Print pages for print quality tests. b Correct any defects in the print quality. Other
For information, see "Print Quality Issues" on page 151.
Is the fax print quality satisfactory?
Step 2 Reduce the fax speed.
The problem has been resolved.
Contact them. Customer service.
a Navigate to the control panel:
Settlements > Faxes > Analog fax equipment > Fax-receive settings > Admin control b Select "Max" in the menu. "Speed" is a lower
Transmission speed off.
Is the fax print quality satisfactory?
The problem has been resolved.
Go to step 2.
a Turn off the printer, wait about 10 seconds and
Turn it back on. b Send the scan job again.
Can you send the scan job?
The problem has been resolved.
Contact them. Customer service.
a Make sure that the cables between the printer and
Print servers are properly connected.
Further information can be found in the installation manual included with the printer. b Send the scan job again.
Can you send the scan job?

Fixing an issue 183
The problem has been resolved.
Go to step 2.
a Make sure that the document or photo with
The upper left corner of the scanner glass is located on the side facing downwards. b Copy the document or photo.
Is the document or photo copied properly?
The problem has been resolved.
Contact them. Customer service.
a Make sure that the selected paper format corresponds to the one in the tray
the inserted paper. b Copy the document or photo.
Is the document or photo copied properly?
Step 1 Check the cable connections.
The problem has been resolved.
Go to step 2.
a Make sure that the Ethernet or USB cable
is properly connected to the computer and printer. b Send the scan job again.
Is the scan job successful?
Step 2 Check the file you want to scan.
The problem has been resolved.
Go to step 3.
a Make sure that the filename is not already in the destination folder
is used. b Make sure the document or photo you are scanning
If you wish, it is not open in another application. c Send the scan job again.
Is the scan job successful?
The problem has been resolved.
Contact them. Customer service.
a Make sure that in the settings for
Target configuration either the check box Attach time stamps or the check box Overwrite existing file is activated. b Send the scan job again.
Is the scan job successful?

Fixing an issue 184

a Wipe the scanner glass and ADZ glass with a
moistened, soft and lint-free cloth. b Make sure that the document or photo with
The upper left corner of the scanner glass is located on the side facing downwards. c Copy the document or photo.
a Check the quality of the original document or photo. b Adjust the settings of scan quality.

a Open the scanner cover. b Wipe the ADF glass and ADZ glasspad with one
moistened, soft and lint-free cloth. c Close the scanner cover. d Scan the document.

Remove the disturbing objects that prevent closing of the cover.

Fixing an issue 185
Close any other applications that hinder the scanning process.
Contact them. Customer service.
The problem has been resolved.
Does it still take too long to scan, or does the computer crash?
Try one or more of the following methods:
Make sure the email address is correct.
For more information, see "Check the printer connection" on page 36.
1 Navigate to the control panel:
Settlements > Equipment > Maintenance > Config. menu > Scanner configuration > Manual scanner registration
2 Press Rapid pressure test.
3 Place the fast-test side on the scanner glass, and touch it Flat bed registration.
4 Press Quick copy test.
5 Compare the copy quick test page with the original document.
6 Repeat step 4 and step 5 until the edges of the copy quick test page match those of the original document.
1 Navigate to the control panel:
Settlements > Equipment > Maintenance > Config. menu > Scanner configuration > Manual scanner registration
2 Press Rapid pressure test.
3 Place the quick-pressure test page in the ADZ compartment.
4 Press on Registration front ADZ or Rear ADZ registration.
Action Yes No

Fixing an issue 186
5 Press Quick copy test.
6 Compare the copy quick test page with the original document.
7 Repeat step 5 and step 6 until the edges of the copy quick test page match those of the original document.
Before contacting Customer Service, make sure you have the following information:
Go to http://support.lexmark.com For support by email or chat, or search the library for a solution with manuals, support documentation, drivers and other downloads.
Technical customer service over the phone is also available. In the U.S.A. or Canada, contact customer service at 1-800-539-6275. In other countries or regions, you can go to http://support.lexmark.com.

Recycling and Disposal 187
Recycling of Lexmark products
How to return products for recycling to Lexmark:
1 Visit www.lexmark.com/recycle.
2 Select the device you want to dispose of.
Lexmark’s goal is to minimize packaging. Less packaging means that Lexmark printers are transported in the most effective and environmentally friendly way possible, with less packaging to be disposed of. This leads to a reduction in the greenhouse effect, greater energy savings and protection of natural resources. Lexmark also offers recycling of packaging components in some countries or regions. For more information, call www.lexmark.com/recycle Then select your country or region. Information on available packaging recycling programmes is included in the product recycling information.
Wherever there are facilities for recycling corrugated board, the cartons used by Lexmark can be fully recycled. These facilities may not exist in your area.
Wherever facilities are available for recycling foam, foam is used in the packaging used by Lexmark. These facilities may not exist in your area.
If you return a cassette to Lexmark, you can use the packaging in which it was delivered. Lexmark also recycles the packaging.
With the Lexmark Print Cartridge Return Program, you can return used cassettes to LexMark for reuse or recycling free of charge. All empty cassettes returned to Lexmark are either reused or dismantled for recycling. The packaging for returning the cassette is also recycled.
To return Lexmark cassette for reuse or recycling, proceed as follows:
1 Visit www.lexmark.com/recycle.
2 Select the device you want to dispose of.

Product name:
Lexmark CX331adwe, Lex mark MC3224dwe; Lex Mark MC 3224adwe Lexport MC3326adwe MFPs
Type of equipment:
Models:
The following section does not apply to countries where these provisions are incompatible with the law applicable therein: LEXMARK INTERNATIONAL, INC. PROVIDES THIS PUBLICATION WITHOUT DEFECT AND DOES NOT ASSUME ANY WARRANTY WHATSOEVER, EXPRESSLY OR IMPLICITLY, INCLUDING BUT NOT LIMITED TO THE LEGAL GUARANTEE OF MARKETABILITY OF A PRODUCT OR ITS SUITABILITY FOR ANY PARTICULAR PURPOSE. In some countries, the exclusion of express or tacit guarantees is not permitted in certain transactions. Therefore, this statement may not be valid for you.
This publication may contain technical inaccuracies or typographical errors. The information contained herein is periodically changed; these changes are included in higher versions. Improvements or changes to the described products or programs can be made at any time.
The references in this software documentation to products, programs and services do not mean that the manufacturer intends to make them available in all countries where such software documentation is offered. No reference to a product, program or service states or implies that only this product, programme or service may be used. Any product, program or service with the same features that does not violate any intellectual property restrictions may be used instead. When using products, programs and services other than those expressly recommended by the manufacturer, the user is responsible for assessing and testing their functionality.
Technical Support from Lexmark is available at http://support.lexmark.com.
Information about the Lexmark Privacy Policy for using this product can be found at www.lexmark.com/privacy.
Underground www.lexmark.com Get information about accessories and downloads.
© 2019 Lexmark International, Inc.
All rights reserved.
285, 485, 685 · Juli 2019

Lexmark and the Lex mark logo are trademarks or registered trademark of Lex Mark International, Inc., registered in the United States and/or other countries.
Google Cloud Print, Google Chrome and Android are trademarks of Google LLC.
Macintosh, the Mac logo and Safari are trademarks of Apple Inc. AirPrint and the AirPrint logo are trademarks of Apple Inc.
Mopria®, the Moprian® logo and the MoPria Alliance logo are registered trademarks of Mopriarian Alliance, Inc. in the United States and other countries. Unauthorised use is strictly prohibited.
PCL® is a registered trademark of Hewlett-Packard Company. PCL is the Hewlett-Packard Company's designation for a set of printer commands (language) and functions contained in the Printer Products. This printer was developed with regard to compatibility with the PCL language. The printer thus recognizes PCL commands used in various application programs and emulates the functions corresponding to the commands.
Wi-Fi Direct is a registered trademark of the Wi-FI Alliance®.
All other brands are the property of their respective owners.
All license notices for this product can be found in the CD:\NOTICES directory of installation software CD.
Model 285, 485, 685
Postal address Lexmark Deutschland GmbH
Post office 1560 63115 Dietzenbach
Addresse Lexmark Deutschland GmbH Max Planck Street 12 63128 Dietzenbach
Phone 0180 - 564 56 44 (product information)
Telephone 01805- 00 01 15 (Technical customer service)
E-mail [email protected]
The following measurements were carried out in accordance with ISO 7779 and reported according to ISO 9296.
Type of equipment 3500

Average sound pressure level within 1 metre in dBA
Copy 49 (MC3224dwe), 49 (MD3224adwe), 50 (MC3326adwe, CX331adwe)
Change of values reserved. Underground www.lexmark.com Get the current values.
The WEEE logo identifies certain recycling programs and processes for electronic products in countries of the European Union. We promote the recycling of our products.
For questions about recycling opportunities, visit the Lexmark website at www.lexmark.com the telephone number of your local sales office.
Do not dispose of the printer and consumables like normal household waste. Contact local authorities for information on disposal and recycling.
This symbol identifies parts that are sensitive to static charges. Touch the areas around these icons only after you have touched a metal object in a remote area to the symbol.
To prevent damage caused by electrostatic discharge when performing maintenance work, such as removing paper jams or replacing consumables, contact the
Scan 44 · Ready 14

The printer's exposed metal frame before accessing or touching the interior of the printer, even if it does not display the icon.
All Lexmark products with the ENERGY STAR® icon on the product or start screen are certified and meet the Energy STAR requirements of the Environmental Protection Agency (EPA) in their configuration.
Ambient temperature 10 to 32.2 °C
Shipping temperature -40 to 40 °C
Storage temperature and relative humidity -40 to 40 °C
8 to 80% relative humidity
The printer is certified in the USA and complies with DHHS 21 CFR Chapter I requirements for Class I (1) laser products, but elsewhere it is certified as a class I laser product that meets the requirements of IEC 60825-1: 2014.
Laser products of Class I are not considered dangerous. The laser system and printer are designed so that under normal operating conditions, user maintenance or prescribed service conditions humans will not be exposed to laser radiation exceeding the values of Class I. The printer has a printing head unit that cannot be maintained and is equipped with a laser of the following specifications.
The following table shows the energy consumption of the product.

Mode Description Power consumption (Watt)
The product generates a printed output based on electronic input.
Unilateral: 385 (MC3224dwe, MC3224adwe); 395 (MC3326adwe, CX331adwe) Bilateral: 260 (MC 3224dwwe,MC3223dwe); 275 (MC 3326adw, Cx331Adwe)
The product generates a printed output of original printed documents.
Scanning The product scans printed documents. 14,5
Ready The product is waiting for a print job. 17
Energy saving mode The product is in a high energy saving mode. 1.1.1
Sleep mode The product is in a low energy savings mode. N/V
From The product is connected to a power outlet, but the mains switch is off.
The electricity consumption listed in the previous table represents average time measurements. The spontaneous power consumption can be significantly higher than the average.
Change of values reserved. Underground www.lexmark.com Get the current values.
This product has an energy saving mode, which is called the energy savings mode. In sleep mode, energy is saved by reducing the amount of power consumed during prolonged inactivity. The energy saving mode is automatically activated if the product has not been used over a specified period of time, also known as the time limit for the energy savings mode.
Factory sets the product sleep time limit as follows (in minutes): 15
The configuration menus can set the time limit for sleep mode to a value between 1 minute and 120 minutes. If the A4 printing speed is 30 pages per minute or less, you can set the time limit to just 60 minutes. Setting the sleep time limit to a low value will reduce energy consumption, but it can increase product response times. At a high value for the time limit, although the reaction time is short, at the same time more energy is consumed.
This product has a very low power mode called sleep mode. In sleep mode, all other systems and devices are safely switched off.
Sleep mode may be activated by one of the following methods:
Factory sleep time lock for this product in all countries or regions. 3 days
The time the printer waits after an order is printed and before it goes to sleep mode can be set to a period between one hour and one month.
0,1

If this printer consumes a small amount of power even when turned off, you will need to unplug the plug from the socket in order to completely eliminate energy consumption.
Sometimes it makes sense to estimate the total energy consumption of the product. Since the energy consumption values are given in the unit of watts, it is necessary to multiply the power consumption by the time spent on each mode. In this way, the total energy consumption can be calculated. The total energy consumption of the printer is the sum of the power consumption values for each mode.
This section provides legal notices about products equipped with analog fax cards.
Lexmark Legal Notices Type/Model:
Use of this product in Germany
For this product, a German billing tone filter for count character transmission (Lexmark part number 80D1888) must be installed for each line via which time control clocks are transmitted in Germany. Time control clocks may not be available in analog lines in Germany. The subscriber can arrange for time control clocks to be provided or request the German network provider to deactivate them by telephone. As a rule, time control clocks are only provided if this is expressly desired by the subscriber during installation.
This section contains legal information that applies only to Wi-Fi models.
Information on whether your device is a WLAN model can be found at http://support.lexmark.com.
WLAN models contain the following modular components:
Lexmark Legal notices Type/Model number LEX-M08-001, FCC ID:IYLLEXM08001; IC:2376A- LEXM07001
The labels of your product tell you which modular components are installed.
The output current radiation of this device is well below the limits for radio frequency radiation set by FCC and other regulatory authorities. Between the antenna and

The minimum distance of 20 cm must be maintained by operators to meet the requirements of FCC and other regulatory authorities on radio frequency radiation.
This product is approved for use in Singapore.

This printer complies with the protection provisions set out in EC Directive 2014/53/EU on the approximation and harmonisation of Member States’ legislation regarding radio equipment.
The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorised representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest, Hungary. A declaration of conformity with the requirements of the Directives shall be provided by an authorised representative or may be made available at: www.lexmark.com /en us/via/Regulatory-compliance/european-union-declaration-of-conformity.html are called up.
Conformity is indicated by the CE mark:
This radio system transmits in the frequency range 2.4 GHz (2412 – 2,472 GHz) in the EU. The maximum e.i.r.p output power, including antenna gain, is ≤ 20 dBm.
This product meets the protection requirements of EC Directives 2014/30/EU, 2014/35/EU, 2009/125/EC and 2011/65/EU on approximation and harmonisation of Member States’ laws (electromagnetic compatibility, safety of electrical components for use within certain voltage limits, radio- and telecommunication baseline equipment and ecodesign of energy-using products and restrictions on the use of certain hazardous substances in electrical and electronic devices).

The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorised representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest, Hungary. A declaration of conformity with the requirements of the Directives shall be provided by an authorised representative or may be made available at: www.lexmark.com /en us/via/Regulatory-compliance/european-union-declaration-of-conformity.html are called up.
This product meets the limits of EN 55022 and EN55032 for Class B equipment, as well as safety requirements according to EN 60950-1 or EN 62368-1.



Finding additional information about the printer 10 firmware
Document feeder (ADZ) 49 Using the
Scanner glass 49 Forwarding faxes 51 Retaining AXES 51 Fax configuration
Printing 40 scans after 53 Spot printing 161 Volatile memory 37
Congruence 168 Vertical, dark lines 171 Vertical and white lines 173 Distorted printout 164 Full-surface color or
Display 51 FCC Notes 193 Missing Colors 160 Troubleshooting
Creating short commands 52
black images 165 white pages 152 troubleshooting, color quality
The scanned card cannot
Expression appears discolored 177 troubleshooting, fax
185 printers are not responding 134 embedded web servers can
181 fax messages are sent by printer
Use 38 Gray background on printouts 156
135 Frequently Asked Questions (FAQ)
send and receive not possible 179 phone number will not
for color printing 176 troubleshooting, printing
H Frequently Asked Questions (FAQ) about color printing 176 Bright Print 158 Connect to WLAN
178 troubleshooting, copying
148 Faulty margins 157 jammed pages are not printed
Documents or photos will be
183 scanners cannot be copied incompletely
Reprinted 147 Frequent Paper Jams 147 Slow Printing 149 Ordered Printing Works
Close 184 Poor Print Quality 184 Troubleshooting, Scanning
Method 35 Using the
do not stick 146 envelopes when
Documents or photos will be
Keystroke method 35 Notes 189, 190, 191, 192, 193 Note on volatile memory 37 Horizontal dark lines 169 horizontal white lines 172
incompletely copied 183 scanning with computer not
Printing on each other 146 Confidential and others
182 scanners cannot be used
paused documents are not printed 149 troubleshooting, print quality
close 184 scanning process was not
183 Poor print quality 184 Vertical dark stripes on
Images 166 Dark print 153 Missing colors 160 Stainless prints and
Output during scanning from the ADZ 184 Setting of paper grade 29 Setting the paper format 29 Settling the paper size "Universal" 30
161 Ghosts on the
About the Embedded Web


Original accessories and consumables from Lexmark 112
Cleaning the scanner 110, 130 residual toner container
Short dial number 48 About the address book 48 about the printer 48 Using automatic
Order 114 Replace 117 Guidelines for Paper 14 RJ-11 Adapter 25 Sleep Mode
Document feeder (ADZ) 47 Using the
Select 14 Letter Sheets 16 Universal
Scanner glass 47 Safety instructions 7, 8, 9 Repeated errors on the expression 175 Daylight saving time
(Format setting) 30 Inadmissible 15 Pre-printed forms 16 Paper properties 14 Paper formats
Documents or photos will be
183 scanning takes too long 185 scanning lets the computer
Configure 29 Sort Copies 45 Sort Multiple Copiers 45 Printed Sort does not work 146 Savings mode
185 scanning with computer does not crash
182 scanning process was not possible
183 Poor print quality 184 Vertical dark stripes on
In the tray 140 paper jam, eliminate
Output when scanning from the ADZ 184 Scanning
Memory Types 37 Saving Print jobs 41 Language, Change of the
Document feeder 145 Paper jam in automatic document feeder 142 Paper jamming in rear flap 142 paper jams in manual feeder
Document feeder (ADZ) 52 Using the
Keyboard on the display 13 traffic jams
Avoid 137 traffic jams, fix
Scanner glass 52 scanning to computer
Setting up 54 scanning to a computer 54 scanning on a flash drive 53 scanner
Document feeder (ADZ) 145 power-saving modes
Area 139 Avoidance 137 cartridges
Recycling 187 Personal identification number method 35 space requirements to printer 20 problems with scan quality 184 points on the printout 161
Using 44, 47, 49, 52 scanners cannot close 184 scanner registration
Change the language 13 Keystroke method 35 Part status
Customize 185 Black Images 165 Send an Email 48 Send a Fax Message
Check 111 telecommunication notes 193 Temperature around the printer 20 test page printing 110 text on printouts cut off 166 toner job
Using the computer 49 to send e-mails
Lexmark products 187 cartridges 187 packaging of Lex mark 187 Cleaning the printer 129

Pages referenced in this manual — manufacturer, support and downloads.
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.