EN
Lexmark logo
Official user manual

Lexmark CS725

129 pages·5.3 MB·Printer·PDF·ENDEFRITNLJA
Lexmark CS725
Table of Contents 183 sections Contents · Safety information · Conventions · Product statements · … ShowHide
Contentsp.2Safety informationp.5Conventionsp.5Product statementsp.5Learning about the printerp.8Finding information about the printerp.8Selecting a location for the printerp.9Printer configurationsp.10Attaching cablesp.11Using the control panelp.12Understanding the status of the power button and indicator lightp.13Using the home screenp.13Menu mapp.15Printing a menu settings pagep.16Setting up and using the home screen applicationsp.17Customizing the home screenp.17Using Display Customizationp.17Setting up Forms and Favoritesp.17Configuring Eco-Settingsp.18Managing contactsp.18Adding contactsp.18Adding groupsp.18Editing contacts or groupsp.19Deleting contacts or groupsp.19Setting up and using the accessibility featuresp.20Enabling Magnification modep.20Activating Voice Guidancep.20Adjusting the Voice Guidance speech ratep.20Enabling spoken passwords or personal identification numbersp.20Navigating the screen using gesturesp.21Using the keyboard on the displayp.21Loading paper and specialty mediap.22Setting the size and type of the specialty mediap.22Configuring Universal paper settingsp.22Loading traysp.22Loading the multipurpose feederp.24Linking traysp.25Printingp.27Printing from a computerp.27Printing formsp.27Printing from a mobile devicep.27Printing from a mobile device using Lexmark Mobile Printp.27Printing from a mobile device using Google Cloud Printp.27Printing from a mobile device using Mopria Print Servicep.28Printing from a mobile device using AirPrintp.28Printing from a flash drivep.28Supported flash drives and file typesp.29Configuring confidential jobsp.30Printing held jobsp.30Printing a font sample listp.31Canceling a print jobp.31Securing the printerp.32Erasing printer memoryp.32Erasing printer hard disk memoryp.32Configuring printer hard disk encryptionp.32Restoring factory default settingsp.32Statement of Volatilityp.33Maintaining the printerp.34Adjusting the speaker volumep.34Adjusting the default internal speaker volumep.34Adjusting the default headphones volumep.34Networkingp.34Connecting the printer to a wireless network using Wi-Fi Protected Setup (WPS)p.34Changing port settings after installing an internal solutions portp.35Setting up serial printing (Windows only)p.35Cleaning the printerp.36Ordering suppliesp.37Checking the status of parts and suppliesp.37Using genuine Lexmark parts and suppliesp.37Ordering toner cartridgesp.37Ordering imaging unit or imaging kitp.39Ordering a waste toner bottlep.39Ordering a fuser maintenance kitp.39Ordering a transfer modulep.40Replacing parts and suppliesp.40Replacing the imaging unitp.40Replacing the imaging kitp.44Replacing a toner cartridgep.48Replacing the waste toner bottlep.50Replacing the fuserp.51Replacing the pick rollerp.52Replacing the separator padp.55Replacing the transfer modulep.57Resetting the maintenance counterp.61Moving the printerp.61Moving the printer to another locationp.61Shipping the printerp.61Saving energy and paperp.62Setting up power saver modesp.62Adjusting the brightness of the printer displayp.62Conserving suppliesp.62Recyclingp.62Recycling Lexmark productsp.62Recycling Lexmark packagingp.63Returning Lexmark cartridges for reuse or recyclingp.63Clearing jamsp.64Avoiding jamsp.64Identifying jam locationsp.65Paper jam in traysp.66Paper jam in the multipurpose feederp.67Paper jam in the standard binp.67Paper jam in door Ap.68Troubleshootingp.72Network connection problemsp.72Cannot open Embedded Web Serverp.72Unable to read flash drivep.73Enabling the USB portp.73Checking the printer connectivityp.73Hardware options problemsp.74Cannot detect internal optionp.74Internal solutions port does not operate correctlyp.75Parallel or serial interface card does not operate correctlyp.75Defective flash detectedp.76Not enough free space in flash memory for resourcesp.76Unformatted flash detectedp.76Issues with suppliesp.76Replace cartridge, printer region mismatchp.76Non-Lexmark supplyp.77Paper feed problemsp.77Envelope seals when printingp.77Collated printing does not workp.78Paper curlp.78Tray linking does not workp.79Check tray connectionp.79Paper frequently jamsp.80Jammed pages are not reprintedp.81Printing problemsp.81Confidential and other held documents do not printp.81Slow printingp.82Print jobs do not printp.83Print quality is poorp.84Blank or white pagesp.84Dark printp.85Ghost imagesp.87Gray backgroundp.87Horizontal dark linesp.88Horizontal white linesp.89Incorrect marginsp.90Jagged or uneven charactersp.91Light printp.92Mottled print and dotsp.93Print crooked or skewedp.94Repeating defectsp.95Solid color or black imagesp.96Text or images cut offp.97Toner easily rubs offp.98Uneven print densityp.98Vertical dark lines or streaksp.99Vertical white linesp.99The printer is not respondingp.100Job prints from the wrong tray or on the wrong paperp.101Color quality problemsp.102Adjusting toner darknessp.102Modifying the colors in printed outputp.102FAQ about color printingp.102The print appears tintedp.104Contacting customer supportp.104Upgrading and migratingp.105Hardwarep.105Available internal optionsp.105Installing a memory cardp.105Installing an internal solutions portp.107Installing an optional cardp.112Installing a printer hard diskp.114Installing optional traysp.118Softwarep.119Installing the printer softwarep.119Adding available options in the print driverp.119Firmwarep.119Exporting or importing a configuration filep.119Updating firmwarep.120Noticesp.121Product informationp.121Edition noticep.121GOVERNMENT END USERSp.121Licensing noticesp.122Trademarksp.122Noise emission levelsp.122Static sensitivity noticep.123Temperature informationp.123Laser noticep.123Laser advisory labelp.123Indexp.125
Page 1 of the Lexmark CS725 user manual — June 2017 www.lexmark.com
Page 1 · click to enlarge
Page 1

CS720, CS725, CS727, CS728

User's Guide

June 2017 www.lexmark.com

Machine type(s):

Model(s):

5028, 7528 · 135, 630, 576

Page 2 of the Lexmark CS725 user manual — Table of Contents
Page 2 · Contents
Contents

Contents

Contentsp.2Safety informationp.5Conventionsp.5Product statementsp.5Learning about the printerp.8Finding information about the printerp.8Selecting a location for the printerp.9Printer configurationsp.10Attaching cablesp.11Using the control panelp.12Understanding the status of the power button and indicator lightp.13Using the home screenp.13Menu mapp.15Printing a menu settings pagep.16Setting up and using the home screen applicationsp.17Customizing the home screenp.17Using Display Customizationp.17Setting up Forms and Favoritesp.17Configuring Eco-Settingsp.18Managing contactsp.18Adding contactsp.18Adding groupsp.18Editing contacts or groupsp.19Deleting contacts or groupsp.19Setting up and using the accessibility featuresp.20Enabling Magnification modep.20Activating Voice Guidancep.20Adjusting the Voice Guidance speech ratep.20Enabling spoken passwords or personal identification numbersp.20Navigating the screen using gesturesp.21Using the keyboard on the displayp.21Loading paper and specialty mediap.22Setting the size and type of the specialty mediap.22Configuring Universal paper settingsp.22Loading traysp.22Loading the multipurpose feederp.24Linking traysp.25Printingp.27Printing from a computerp.27Printing formsp.27Printing from a mobile devicep.27Printing from a mobile device using Lexmark Mobile Printp.27Printing from a mobile device using Google Cloud Printp.27Printing from a mobile device using Mopria Print Servicep.28Printing from a mobile device using AirPrintp.28Printing from a flash drivep.28Supported flash drives and file typesp.29Configuring confidential jobsp.30Printing held jobsp.30Printing a font sample listp.31Canceling a print jobp.31Securing the printerp.32Erasing printer memoryp.32Erasing printer hard disk memoryp.32Configuring printer hard disk encryptionp.32Restoring factory default settingsp.32Statement of Volatilityp.33Maintaining the printerp.34Adjusting the speaker volumep.34Adjusting the default internal speaker volumep.34Adjusting the default headphones volumep.34Networkingp.34Connecting the printer to a wireless network using Wi-Fi Protected Setup (WPS)p.34Changing port settings after installing an internal solutions portp.35Setting up serial printing (Windows only)p.35Cleaning the printerp.36Ordering suppliesp.37Checking the status of parts and suppliesp.37Using genuine Lexmark parts and suppliesp.37Ordering toner cartridgesp.37Ordering imaging unit or imaging kitp.39Ordering a waste toner bottlep.39Ordering a fuser maintenance kitp.39Ordering a transfer modulep.40Replacing parts and suppliesp.40Replacing the imaging unitp.40Replacing the imaging kitp.44Replacing a toner cartridgep.48Replacing the waste toner bottlep.50Replacing the fuserp.51Replacing the pick rollerp.52Replacing the separator padp.55Replacing the transfer modulep.57Resetting the maintenance counterp.61Moving the printerp.61Moving the printer to another locationp.61Shipping the printerp.61Saving energy and paperp.62Setting up power saver modesp.62Adjusting the brightness of the printer displayp.62Conserving suppliesp.62Recyclingp.62Recycling Lexmark productsp.62Recycling Lexmark packagingp.63Returning Lexmark cartridges for reuse or recyclingp.63Clearing jamsp.64Avoiding jamsp.64Identifying jam locationsp.65Paper jam in traysp.66Paper jam in the multipurpose feederp.67Paper jam in the standard binp.67Paper jam in door Ap.68Troubleshootingp.72Network connection problemsp.72Cannot open Embedded Web Serverp.72Unable to read flash drivep.73Enabling the USB portp.73Checking the printer connectivityp.73Hardware options problemsp.74Cannot detect internal optionp.74Internal solutions port does not operate correctlyp.75Parallel or serial interface card does not operate correctlyp.75Defective flash detectedp.76Not enough free space in flash memory for resourcesp.76Unformatted flash detectedp.76Issues with suppliesp.76Replace cartridge, printer region mismatchp.76Non-Lexmark supplyp.77Paper feed problemsp.77Envelope seals when printingp.77Collated printing does not workp.78Paper curlp.78Tray linking does not workp.79Check tray connectionp.79Paper frequently jamsp.80Jammed pages are not reprintedp.81Printing problemsp.81Confidential and other held documents do not printp.81Slow printingp.82Print jobs do not printp.83Print quality is poorp.84Blank or white pagesp.84Dark printp.85Ghost imagesp.87Gray backgroundp.87Horizontal dark linesp.88Horizontal white linesp.89Incorrect marginsp.90Jagged or uneven charactersp.91Light printp.92Mottled print and dotsp.93Print crooked or skewedp.94Repeating defectsp.95Solid color or black imagesp.96Text or images cut offp.97Toner easily rubs offp.98Uneven print densityp.98Vertical dark lines or streaksp.99Vertical white linesp.99The printer is not respondingp.100Job prints from the wrong tray or on the wrong paperp.101Color quality problemsp.102Adjusting toner darknessp.102Modifying the colors in printed outputp.102FAQ about color printingp.102The print appears tintedp.104Contacting customer supportp.104Upgrading and migratingp.105Hardwarep.105Available internal optionsp.105Installing a memory cardp.105Installing an internal solutions portp.107Installing an optional cardp.112Installing a printer hard diskp.114Installing optional traysp.118Softwarep.119Installing the printer softwarep.119Adding available options in the print driverp.119Firmwarep.119Exporting or importing a configuration filep.119Updating firmwarep.120Noticesp.121Product informationp.121Edition noticep.121GOVERNMENT END USERSp.121Licensing noticesp.122Trademarksp.122Noise emission levelsp.122Static sensitivity noticep.123Temperature informationp.123Laser noticep.123Laser advisory labelp.123Indexp.125
Page 5 of the Lexmark CS725 user manual — Product statements
Page 5 · click to enlarge
Page 5

Safety information

Conventions

Different types of caution statements include:

Product statements

Safety information 5

Page 6 of the Lexmark CS725 user manual — Safety information
Page 6 · click to enlarge
Page 6

CAUTION—POTENTIAL INJURY: Do not cut, twist, bind, crush, or place heavy objects on the power cord. Do not subject the power cord to abrasion or stress. Do not pinch the power cord between objects such as furniture and walls. If any of these things happen, a risk of fire or electrical shock results. Inspect the power cord regularly for signs of such problems. Remove the power cord from the electrical outlet before inspecting it.

CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock, if you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

  • CAUTION—POTENTIAL INJURY: When moving the printer, follow these guidelines to avoid personal injury or printer damage:
  • Make sure that all doors and trays are closed.
  • Turn off the printer, and then unplug the power cord from the electrical outlet.
  • Disconnect all cords and cables from the printer.
  • If the printer has separate floor-standing optional trays or output options attached to it, then disconnect them before moving the printer.
  • If the printer has a caster base, then carefully roll it to the new location. Use caution when passing over thresholds and breaks in flooring.
  • If the printer does not have a caster base but is configured with optional trays or output options, then remove the output options and lift the printer off the trays. Do not try to lift the printer and any options at the same time.
  • Always use the handholds on the printer to lift it.
  • Any cart used to move the printer must have a surface able to support the full footprint of the printer.
  • Any cart used to move the hardware options must have a surface able to support the dimensions of the options.
  • Keep the printer in an upright position.
  • Avoid severe jarring movements.
  • Make sure that your fingers are not under the printer when you set it down.
  • Make sure that there is adequate clearance around the printer.

Safety information 6

Page 7 of the Lexmark CS725 user manual — Safety information
Page 7 · click to enlarge
Page 7

This product is designed, tested, and approved to meet strict global safety standards with the use of specific manufacturer's components. The safety features of some parts may not always be obvious. The manufacturer is not responsible for the use of other replacement parts.

Refer service or repairs, other than those described in the user documentation, to a service representative.

This product uses a printing process that heats the print media, and the heat may cause the media to release emissions. You must understand the section in your operating instructions that discusses the guidelines for selecting print media to avoid the possibility of harmful emissions.

This product may produce small amounts of ozone during normal operation, and may be equipped with a filter designed to limit ozone concentrations to levels well below the recommended exposure limits. To avoid high ozone concentration levels during extensive usage, install this product in a well-ventilated area and replace the ozone and exhaust filters if instructed to do so in the product maintenance instructions. If there are no references to filters in the product maintenance instructions, then there are no filters requiring replacement for this product.

SAVE THESE INSTRUCTIONS.

Safety information 7

Page 8 of the Lexmark CS725 user manual — Learning about the printer
Page 8 · click to enlarge
Page 8

Learning about the printer 8

Learning about the printer

Finding information about the printer

What are you looking for?Find it here Initial setup instructions: • Connecting the printer • Installing the printer softwareSee the setup documentation that came with the printer or go to http://support.lexmark.com. More setup and instructions for using the printer: • Selecting and storing paper and specialty media • Loading paper • Configuring printer settings • Viewing and printing documents and photos • Setting up and using the printer software • Configuring the printer on a network • Caring for and maintaining the printer • Troubleshooting and solving problemsInformation Center—Go to http://infoserve.lexmark.com. Help Menu Pages—Access the guides on the printer firmware or go to http://support.lexmark.com. Touch Screen Guide—Go to http://support.lexmark.com. Product videos—Go to http://infoserve.lexmark.com/idv/. Information on setting up and configuring the accessibility features of your printerLexmark Accessibility Guide—Go to http://support.lexmark.com. Help using the printer softwareHelp for Microsoft® Windows® or Macintosh operating systems—Open a printer software program or application, and then click Help. ? Click to view context‑sensitive information. Notes: • Help is automatically installed with the printer software. • Depending on the operating system, the printer software is located in the printer program folder or on the desktop.
Page 9 of the Lexmark CS725 user manual — Selecting a location for the printer
Page 9 · click to enlarge
Page 9

Learning about the printer 9

What are you looking for?Find it here The latest supplemental information, updates, and customer support: • Documentation • Driver downloads • Live chat support • E‑mail support • Voice supportGo to http://support.lexmark.com. Note: Select your country or region, and then select your product to view the appropriate support site. Support contact information for your country or region can be found on the website or on the printed warranty that came with the printer. Have the following information ready when you contact customer support: • Place and date of purchase • Machine type and serial number • Safety information • Regulatory information • Warranty information • Environmental informationWarranty information varies by country or region: • In the U.S.—See the Statement of Limited Warranty included with the printer, or go to http://support.lexmark.com. • In other countries and regions—See the printed warranty that came with the printer. Product Information Guide—See the documentation that came with the printer or go to http://support.lexmark.com.
Lexmark CS725 — Selecting a location for the printer diagram (page 9)
Fig. 1 · Selecting a location for the printer

Selecting a location for the printer

When selecting a location for the printer, leave enough room to open trays, covers, and doors and to install hardware options.

  • Set up the printer near an electrical outlet.
  • CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock, do not place or use this product near water or wet locations.
  • Make sure that airflow in the room meets the latest revision of the ASHRAE 62 standard or the CEN Technical Committee 156 standard.
  • Provide a flat, sturdy, and stable surface.
Page 10 of the Lexmark CS725 user manual — Printer configurations
Page 10 · click to enlarge
Page 10

Learning about the printer 10

  • Keep the printer: – Clean, dry, and free of dust. – Away from stray staples and paper clips. – Away from the direct airflow of air conditioners, heaters, or ventilators. – Free from direct sunlight and humidity extremes.
  • Observe the recommended temperatures and avoid fluctuations:
Ambient temperature10 to 32.2°C (50 to 90°F) Storage temperature-40 to 43°C (-40 to 110°F)
  • Allow the following recommended amount of space around the printer for proper ventilation:
Lexmark CS725 — Printer configurations diagram (page 10)
Fig. 2 · Printer configurations
Top 2Right side127 mm (5 in.) 3Front508 mm (20 in.) 4Left side127 mm (5 in.) Rear

Printer configurations

You can configure your printer by adding three optional 550‑sheet trays.

Page 11 of the Lexmark CS725 user manual — Attaching cables
Page 11 · click to enlarge
Page 11

Learning about the printer 11

Lexmark CS725 — Attaching cables diagram (page 11)
Fig. 3 · Attaching cables
2650-sheet duo tray 3Optional 550‑sheet trays

Attaching cables

1 Standard bin · 4 Control panel

Page 12 of the Lexmark CS725 user manual — Using the control panel
Page 12 · click to enlarge
Page 12

Learning about the printer 12

Lexmark CS725 — Using the control panel diagram (page 12)
Fig. 4 · Using the control panel
Use theTo 1Ethernet portConnect the printer to a network. 2USB portAttach a keyboard or any compatible option. 3USB printer portConnect the printer to a computer. 4Printer power cord socketConnect the printer to a properly grounded electrical outlet.

Using the control panel

Lexmark CS725 — Using the control panel diagram (page 12)
Fig. 5 · Using the control panel
  • 1 Display
  • View the printer messages and supply status.
  • Set up and operate the printer.
Page 13 of the Lexmark CS725 user manual — Using the home screen
Page 13 · click to enlarge
Page 13

Learning about the printer 13

2 Home button Go to the home screen.

3 Keypad Enter numbers or symbols in an input field.

4 Power button • Turn on or turn off the printer.

  • Note: To turn off the printer, press and hold the power button for five seconds.
  • Set the printer to Sleep or Hibernate mode.
  • Wake the printer from Sleep or Hibernate mode.

5 Stop or Cancel button Stop the current job.

6 Indicator light Check the status of the printer.

7 Volume buttons Adjust the volume of the headset or speaker.

8 Headset or speaker port Attach a headset or speaker.

9 Backspace button Move the cursor backward and delete a character in an input field.

Understanding the status of the power button and indicator light

Indicator light Printer status

Off The printer is off or in Hibernate mode.

Blue The printer is ready or processing data.

Red The printer requires user intervention.

Power button light Printer status

Off The printer is off, ready, or processing data.

Solid amber The printer is in sleep mode.

Blinking amber The printer is in hibernate mode.

Using the home screen

When the printer is turned on, the display shows the home screen. Use the home screen buttons and icons to initiate an action.

Use the To

Page 14 of the Lexmark CS725 user manual — These settings may also appear on the home screen
Page 14 · click to enlarge
Page 14

Learning about the printer 14

Lexmark CS725 — Understanding the status of the power button and indicator light diagram (page 14)
Fig. 6 · Understanding the status of the power button and ind…
  • 1 Status/Supplies
  • Show a printer warning or error message whenever the printer requires intervention to continue processing.
  • View more information on the printer warning or message, and on how to clear it.

2 Job Queue Show all the current print jobs.

3 Change Language Change the language on the printer display.

5 USB Drive View, select, or print photos and documents from a flash drive.

6 Held Jobs Show all the current held print jobs.

These settings may also appear on the home screen

Lexmark CS725 — These settings may also appear on the home screen diagram (page 14)
Fig. 7 · These settings may also appear on the home screen

Lock Device Prevent users from accessing any printer functions from the home screen.

Page 15 of the Lexmark CS725 user manual — USB Drive
Page 15 · click to enlarge
Page 15

Learning about the printer 15

Menu map

Device

  • Preferences
  • Remote Operator Panel
  • Notifications
  • Power Management
  • Information Sent to Lexmark
  • Accessibility
  • Restore Factory Defaults
  • Maintenance
  • Visible Home Screen Icons
  • About This Printer

Print

  • Layout
  • Finishing
  • Setup
  • Quality
  • Job Accounting
  • XPS
  • PDF
  • PostScript
  • PCL
  • HTML
  • Image
  • PPDS

Paper

  • Tray Configuration
  • Media Configuration
  • Bin Configuration

Network/Ports

  • Network Overview
  • Wireless
  • AirPrint
  • Ethernet
  • TCP/IP
  • IPv6
  • SNMP
  • IPSec
  • LPD Configuration
  • HTTP/FTP Settings
  • ThinPrint
  • USB
  • Parallel [x]
  • Serial
  • Google Cloud Print
  • Wi-Fi Direct

USB Drive

Security

  • Login Methods
  • Schedule USB Devices
  • Security Audit Log
  • Login Restrictions
  • Confidential Print Setup
  • Disk Encryption
  • Erase Temporary Data Files
  • Solutions LDAP Settings
  • Miscellaneous

Flash Drive Print

Page 16 of the Lexmark CS725 user manual — Printing a menu settings page
Page 16 · click to enlarge
Page 16

Learning about the printer 16

Option Card Menu

Reports

  • Menu Settings Page
  • Device
  • Print
  • Shortcuts
  • Network

Help

  • Print All Guides
  • Color Quality Guide
  • Connection Guide
  • Information Guide
  • Media Guide
  • Moving Guide
  • Print Quality Guide
  • Supplies Guide

Troubleshooting

  • Basic Print Quality Samples
  • Advanced Print Quality Samples

Printing a menu settings page

From the home screen, touch Settings > Reports > Menu Settings Page.

Page 17 of the Lexmark CS725 user manual — Setting up Forms and Favorites
Page 17 · click to enlarge
Page 17

Setting up and using the home screen applications 17

Setting up and using the home screen applications

Customizing the home screen

1 Open a web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the web page correctly.

2 Click Settings > Device > Visible Home Screen Icons.

3 Select the icons that you want to appear on the home screen.

4 Apply the changes.

Using Display Customization

Changing the wallpaper

1 From the home screen, touch Change Wallpaper.

2 Select an image to use.

3 Apply the changes.

Creating a slide show

Before you begin, make sure to configure the slide show settings. For more information, see the documentation that came with the solution.

1 Insert a flash drive into the USB port.

2 From the home screen, touch Slideshow.

Setting up Forms and Favorites

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Apps > Forms and Favorites > Configure.

3 Click Add, and then customize the settings.

Page 18 of the Lexmark CS725 user manual — Adding groups
Page 18 · click to enlarge
Page 18

Setting up and using the home screen applications 18

  • To make sure that the location settings of the bookmark are correct, type the IP address of the host computer where the bookmark is located.
  • Make sure that the printer has access rights to the folder where the bookmark is located.

4 Apply the changes.

Configuring Eco ‑ Settings

1 From the home screen, touch Eco‑Settings.

2 Configure the Eco‑Mode settings or schedule a power-saving mode.

3 Apply the changes.

Managing contacts

Adding contacts

1 Open a web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the web page correctly.

2 Click Address Book.

3 From the Contacts section, add a contact.

4 If necessary, specify a login method to allow application access.

5 Apply the changes.

Adding groups

1 Open a web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the web page correctly.

2 Click Address Book.

3 From the Contact Groups section, add a group name.

4 Apply the changes.

Page 19 of the Lexmark CS725 user manual — Deleting contacts or groups
Page 19 · click to enlarge
Page 19

Setting up and using the home screen applications 19

Editing contacts or groups

1 Open a web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the web page correctly.

2 Click Address Book.

  • 3 Do either of the following:
  • From the Contacts section, click a contact name, and then edit the information.
  • From the Contact Groups section, click a group name, and then edit the information.

4 Apply the changes.

Deleting contacts or groups

1 Open a web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the web page correctly.

2 Click Address Book.

  • 3 Do either of the following:
  • From the Contacts section, select a contact that you want to delete.
  • From the Contact Groups section, select a group name that you want to delete.
Page 20 of the Lexmark CS725 user manual — Enabling spoken passwords or personal identification numbers
Page 20 · click to enlarge
Page 20

Setting up and using the accessibility features 20

Setting up and using the accessibility features

Enabling Magnification mode

1 From the control panel, press and hold the 5 key until you hear a voice message.

2 Select Magnification.

3 Select OK.

For more information on navigating a magnified screen, see “Navigating the screen using gestures” on page 21.

Activating Voice Guidance

From the control panel

1 Press and hold the 5 key until a voice message is heard.

2 Select OK.

From the keyboard

1 Press and hold the 5 key until a voice message is heard.

2 Press Tab to navigate the focus cursor to the OK button, and then press Enter.

  • Voice Guidance is also activated by inserting the headphones into the headphone jack.
  • To adjust the volume, use the volume buttons at the bottom part of the control panel.

Adjusting the Voice Guidance speech rate

1 From the home screen, select Settings > Device > Accessibility > Speech Rate.

2 Select the speech rate.

Enabling spoken passwords or personal identification numbers

1 From the home screen, select Settings > Device > Accessibility > Speak Passwords/PINs.

2 Enable the setting.

Page 21 of the Lexmark CS725 user manual — Using the keyboard on the display
Page 21 · click to enlarge
Page 21

Setting up and using the accessibility features 21

Navigating the screen using gestures

  • The gestures are applicable only when Voice Guidance is activated.
  • A physical keyboard is required for typing characters and adjusting certain settings.

Double‑tap Select an option or item on the screen.

Triple‑tap Zoom in or zoom out text and images.

Swipe right or swipe down Move to the next item on the screen.

Swipe left or swipe up Move to the previous item on the screen.

Pan Access parts of the zoomed image that are beyond the limits of the screen.

Swipe up then left Exit an application and return to the home screen.

  • Swipe down then left
  • Cancel a job.
  • Go back to the previous setting.
  • Exit the screen that appears without changing any setting or value.

Swipe up then down Repeat a spoken prompt.

Using the keyboard on the display

Do one or more of the following:

  • Drag a finger over the key to announce the character.
  • Lift the finger to enter or type the character in the field.
  • Press Backspace to delete characters.
  • To hear the content in the input field, press Tab , and then press Shift + Tab .

Gesture Function

Page 22 of the Lexmark CS725 user manual — Loading trays
Page 22 · click to enlarge
Page 22

Loading paper and specialty media 22

Loading paper and specialty media

Setting the size and type of the specialty media

The trays automatically detect the size of plain paper. For specialty media like labels, card stock, or envelopes, do the following:

1 From the home screen, navigate to:

Settings > Paper > Tray Configuration > Paper Size/Type > select a paper source

2 Set the size and type of the specialty media.

Configuring Universal paper settings

1 From the home screen, touch Settings > Paper > Media Configuration > Universal Setup.

2 Configure the settings.

Loading trays

1 Remove the tray.

Lexmark CS725 — Loading trays diagram (page 22)
Fig. 8 · Loading trays
Lexmark CS725 — Loading trays diagram (page 22)
Fig. 9 · Loading trays
Lexmark CS725 — Loading trays diagram (page 22)
Fig. 10 · Loading trays
Lexmark CS725 — Loading trays diagram (page 22)
Fig. 11 · Loading trays

2 Adjust the guides to match the size of the paper you are loading.

Page 23 of the Lexmark CS725 user manual — Loading paper and specialty media
Page 23 · click to enlarge
Page 23

Loading paper and specialty media 23

Lexmark CS725 — Loading paper and specialty media diagram (page 23)
Fig. 12 · Loading paper and specialty media

3 Flex, fan, and align the paper edges before loading.

Lexmark CS725 — Loading paper and specialty media diagram (page 23)
Fig. 13 · Loading paper and specialty media

4 Load the paper stack with the printable side faceup.

  • For one ‑ sided printing, load letterhead faceup with the header toward the front of the tray.
  • For two ‑ sided printing, load letterhead facedown with the header toward the back of the tray.
  • Do not slide paper into the tray.
  • Make sure that the stack height is below the maximum paper fill indicator. Overfilling may cause paper jams.
Lexmark CS725 — Loading paper and specialty media diagram (page 23)
Fig. 14 · Loading paper and specialty media

5 Insert the tray.

If necessary, set the paper size and type to match the paper loaded in the tray.

Page 24 of the Lexmark CS725 user manual — Loading the multipurpose feeder
Page 24 · click to enlarge
Page 24

Loading paper and specialty media 24

Loading the multipurpose feeder

1 Open the multipurpose feeder.

Lexmark CS725 — Loading the multipurpose feeder diagram (page 24)
Fig. 15 · Loading the multipurpose feeder

2 Adjust the guide to match the size of the paper you are loading.

Lexmark CS725 — Loading the multipurpose feeder diagram (page 24)
Fig. 16 · Loading the multipurpose feeder

3 Flex, fan, and align the paper edges before loading.

Lexmark CS725 — Loading the multipurpose feeder diagram (page 24)
Fig. 17 · Loading the multipurpose feeder
Page 25 of the Lexmark CS725 user manual — Linking trays
Page 25 · click to enlarge
Page 25

Loading paper and specialty media 25

4 Load the paper. • Load paper and card stock with the printable side facedown and the top edge entering the printer first.

Lexmark CS725 — Linking trays diagram (page 25)
Fig. 18 · Linking trays
Lexmark CS725 — Linking trays diagram (page 25)
Fig. 19 · Linking trays
  • Load envelopes with the flap side up and against the right side of the paper guide. Load European envelopes with the flap entering the printer first.
Lexmark CS725 — Linking trays diagram (page 25)
Fig. 20 · Linking trays

5 From the Paper Menu in the control panel, set the paper size and type to match the paper loaded in the tray.

Linking trays

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Paper.

Page 26 of the Lexmark CS725 user manual — Linking trays
Page 26 · click to enlarge
Page 26

Loading paper and specialty media 26

3 Match the paper size and type for the trays you are linking.

4 Save the settings.

Page 27 of the Lexmark CS725 user manual — Printing from a mobile device using Google Cloud Print
Page 27 · click to enlarge
Page 27

Printing

Printing from a computer

1 From the document that you are trying to print, open the Print dialog.

2 If necessary, adjust the settings.

3 Print the document.

Printing forms

1 From the home screen, navigate to:

Forms and Favorites > select form > Print

2 If necessary, configure the print settings.

3 Send the print job.

Printing from a mobile device

Printing from a mobile device using Lexmark Mobile Print

LexmarkTM Mobile Print allows you to send documents and images directly to a supported Lexmark printer.

1 Open the document, and then send or share the document to Lexmark Mobile Print.

2 Select a printer.

3 Print the document.

Printing from a mobile device using Google Cloud Print

Google Cloud PrintTM is a mobile printing service that allows enabled applications on mobile devices to print to any Google Cloud Print‑ready printer.

1 From the home screen of your mobile device, launch an enabled application.

2 Tap Print, and then select the printer.

3 Send the print job.

Printing 27

Page 28 of the Lexmark CS725 user manual — Printing from a flash drive
Page 28 · click to enlarge
Page 28

Printing from a mobile device using Mopria Print Service

Mopria® Print Service is a mobile printing solution for mobile devices running on Android version 4.4 or later. It allows you to print directly to any Mopria‑certified printer.

1 From the home screen of your mobile device, launch a compatible application.

2 Tap Print, and then select the printer.

3 Send the print job.

Printing from a mobile device using AirPrint

AirPrint is a mobile printing solution that allows you to print directly from Apple devices to an AirPrint‑certified printer.

  • This application is supported only in some Apple devices.
  • This application is supported only in some printer models.

1 From the home screen of your mobile device, launch a compatible application.

2 Select an item to print, and then tap the share icon.

3 Tap Print, and then select a printer.

4 Print the document.

Printing from a flash drive

1 Insert a flash drive into the USB port.

Lexmark CS725 — Printing from a flash drive diagram (page 28)
Fig. 21 · Printing from a flash drive
  • If you insert the flash drive when an error message appears, then the printer ignores the flash drive.

Printing 28

Page 29 of the Lexmark CS725 user manual — File types
Page 29 · click to enlarge
Page 29
  • If you insert the flash drive while the printer is processing other print jobs, then Busy appears on the display.

2 From the display, touch the document that you want to print.

If necessary, configure other print settings.

3 Send the print job.

To print another document, touch USB Drive.

Lexmark CS725 — Supported flash drives and file types diagram (page 29)
Fig. 22 · Supported flash drives and file types

Supported flash drives and file types

Flash drives

  • Lexar JumpDrive S70 (16GB and 32GB)
  • SanDisk Cruzer (16GB and 32GB)
  • PNY Attaché (16GB and 32GB)

– The printer supports high‑speed USB flash drives with full‑speed standard. – USB flash drives must support the File Allocation Table (FAT) system.

File types

Documents:

  • .doc or .docx
  • .xls or .xlsx
  • .ppt or .pptx
  • .pdf
  • .xps

Printing 29

Page 30 of the Lexmark CS725 user manual — Printing held jobs
Page 30 · click to enlarge
Page 30

Images:

  • .dcx
  • .gif
  • .jpeg or .jpg
  • .bmp
  • .pcx
  • .tiff or .tif
  • .png

Configuring confidential jobs

1 From the home screen, touch Settings > Security > Confidential Print Setup.

2 Configure the settings.

Max Invalid PIN Limit the number of times an invalid PIN can be entered.

Set the amount of time before confidential jobs are automatically deleted from the printer memory.

Set the amount of time before repeat jobs are deleted from the printer memory.

Verify Job Expiration Set the amount of time before verify jobs are deleted from the printer memory.

Set the amount of time before reserved jobs are deleted without being printed.

Printing held jobs

1 From the document you are trying to print, open the Print dialog.

  • 2 Select the printer, and then do the following:
  • For Windows users, click Properties or Preferences , and then click Print and Hold .
  • For Macintosh users, select Print and Hold .

3 Select the print job type.

4 If necessary, assign a user name.

5 Send the print job.

6 From the printer home screen, touch Held Jobs.

7 Send the print job.

Show 5 more labels / short text on this page
Printing 30 · Use To · Confidential Job Expiration · Repeat Job Expiration · Reserve Job Expiration
Page 31 of the Lexmark CS725 user manual — From the computer
Page 31 · click to enlarge
Page 31

Printing a font sample list

1 From the home screen, touch Settings > Reports > Print > Print Fonts.

2 Touch PCL Fonts or PostScript Fonts.

Canceling a print job

From the printer control panel

1 From the home screen, touch Job Queue.

2 Select the job to cancel.

From the computer

  • 1 Depending on the operating system, do either of the following:
  • Open the printers folder, and then select your printer.
  • From the System Preferences in the Apple menu, navigate to your printer.

2 Select the job to cancel.

Printing 31

Page 32 of the Lexmark CS725 user manual — Restoring factory default settings
Page 32 · click to enlarge
Page 32

Securing the printer 32

Securing the printer

Erasing printer memory

To erase volatile memory or buffered data in your printer, turn off the printer.

To erase non‑volatile memory or individual settings, device and network settings, security settings, and embedded solutions, do the following:

1 From the home screen, touch Settings > Device > Maintenance > Out of Service Erase.

2 Select the Sanitize all information on nonvolatile memory check box, and then touch ERASE.

3 Follow the instructions on the display.

Erasing printer hard disk memory

1 From the home screen, touch Settings > Device > Maintenance > Out of Service Erase.

2 Select the Sanitize all information on hard disk check box, and then touch ERASE.

3 Follow the instructions on the display.

Configuring printer hard disk encryption

1 From the home screen, touch Settings > Security > Disk Encryption > Start Encryption.

2 Follow the instructions on the display.

  • Do not turn off the printer during the encryption process. Loss of data can occur.
  • Disk encryption can take from several minutes to more than an hour, making the printer unavailable for other tasks.
  • After encryption, the printer returns to the home screen.

Restoring factory default settings

From the home screen, touch Settings > Device > Restore Factory Defaults > Restore Settings > Restore all settings > RESTORE > Start.

For more information, see “Erasing printer memory” on page 32.

Page 33 of the Lexmark CS725 user manual — Disposing of a printer hard disk
Page 33 · click to enlarge
Page 33

Securing the printer 33

Statement of Volatility

Your printer contains various types of memory that can store device and network settings, and user data.

Type of memory Description

Volatile memory Your printer uses standard random access memory (RAM) to temporarily buffer user data during simple print jobs.

Non-volatile memory Your printer may use two forms of non-volatile memory: EEPROM and NAND (flash memory). Both types are used to store the operating system, device settings, network information and bookmark settings, and embedded solutions.

Hard disk memory Some printers have a hard disk drive installed. The printer hard disk is designed for printer-specific functionality. This lets the printer retain buffered user data from complex print jobs, as well as form data, and font data.

Erase the content of any installed printer memory in the following circumstances:

  • The printer is being decommissioned.
  • The printer hard disk is being replaced.
  • The printer is being moved to a different department or location.
  • The printer is being serviced by someone from outside your organization.
  • The printer is being removed from your premises for service.
  • The printer is being sold to another organization.

Disposing of a printer hard disk

In high‑security environments, it may be necessary to take additional steps to make sure that confidential data stored in the printer hard disk cannot be accessed when the printer—or its hard disk—is removed from your premises.

  • Degaussing —Flushes the hard disk with a magnetic field that erases stored data
  • Crushing —Physically compresses the hard disk to break component parts and render them unreadable
  • Milling —Physically shreds the hard disk into small metal bits
Page 34 of the Lexmark CS725 user manual — Using the Push Button method
Page 34 · click to enlarge
Page 34

Maintaining the printer 34

Maintaining the printer

Adjusting the speaker volume

Adjusting the default internal speaker volume

The speaker volume will reset to default value after the session is logged out, when the printer wakes from Sleep or Hibernate mode, or after a power‑on reset.

1 From the control panel, navigate to:

Settings > Device > Preferences > Audio Feedback

2 Select the volume.

Adjusting the default headphones volume

Headphones volume will reset to default value after the session is logged out, when the printer wakes from Sleep or Hibernate mode, or after a power‑on reset.

1 From the control panel, select Settings > Device > Accessibility > Headphone Volume.

2 Select the volume.

Networking

Connecting the printer to a wireless network using Wi‑Fi Protected Setup (WPS)

Before you begin, make sure that:

  • The access point (wireless router) is WPS ‑ certified or WPS ‑ compatible. For more information, see the documentation that came with your access point.
  • A wireless network adapter is installed in your printer. For more information, see the instructions that came with the adapter.

Using the Push Button method

1 From the control panel, navigate to:

Settings > Network/Ports > Wireless > Wi‑Fi Protected Setup > Start Push Button Method

2 Follow the instructions on the display.

Page 35 of the Lexmark CS725 user manual — Setting up serial printing (Windows only)
Page 35 · click to enlarge
Page 35

Maintaining the printer 35

Using the personal identification number (PIN) method

1 From the control panel, navigate to:

Settings > Network/Ports > Wireless > Wi‑Fi Protected Setup > Start PIN Method

2 Copy the eight‑digit WPS PIN.

3 Open a Web browser, and then type the IP address of your access point in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

4 Access the WPS settings. For more information, see the documentation that came with your access point.

5 Enter the eight‑digit PIN, and then save the changes.

Changing port settings after installing an internal solutions port

  • If the printer has a static IP address, then do not change the configuration.
  • If the computers are configured to use the network name instead of an IP address, then do not change the configuration.
  • If you are adding a wireless internal solutions port (ISP) to a printer previously configured for an Ethernet connection, then disconnect the printer from the Ethernet network.

For Windows users

1 Open the printers folder.

2 From the shortcut menu of the printer with the new ISP, open the printer properties.

3 Configure the port from the list.

4 Update the IP address.

5 Apply the changes.

For Macintosh users

1 From System Preferences in the Apple menu, navigate to the list of printers, and then select + > IP.

2 Type the IP address in the address field.

3 Apply the changes.

Setting up serial printing (Windows only)

1 Set the parameters in the printer. a From the control panel, navigate to the menu for the port settings. b Locate the menu for the serial port settings, and then adjust the settings, if necessary.

Page 36 of the Lexmark CS725 user manual — Cleaning the printer
Page 36 · click to enlarge
Page 36

Maintaining the printer 36

c Apply the changes.

2 From your computer, open the printers folder, and then select your printer.

3 Open the printer properties, and then select the COM port from the list.

4 Set the COM port parameters in Device Manager.

  • Serial printing reduces printing speed.
  • Make sure that the serial cable is connected to the serial port on your printer.

Cleaning the printer

  • Perform this task after every few months.
  • Damage to the printer caused by improper handling is not covered by the printer warranty.

1 Turn off the printer, and then unplug the power cord from the electrical outlet.

2 Remove paper from the standard bin and multipurpose feeder.

3 Remove any dust, lint, and pieces of paper around the printer using a soft brush or vacuum.

4 Wipe the outside of the printer with a damp, soft, lint‑free cloth.

  • Do not use household cleaners or detergents, as they may damage the finish of the printer.
  • Make sure that all areas of the printer are dry after cleaning.

5 Connect the power cord to the electrical outlet, and then turn on the printer.

Page 37 of the Lexmark CS725 user manual — (LAD)
Page 37 · click to enlarge
Page 37

Maintaining the printer 37

Ordering supplies

To order supplies in the U.S., contact Lexmark at 1-800-539-6275 for information about Lexmark authorized supplies dealers in your area. In other countries or regions, go to www.lexmark.com or contact the place where you purchased the printer.

Checking the status of parts and supplies

1 From the home screen, touch Status/Supplies.

2 Select the parts or supplies that you want to check.

Using genuine Lexmark parts and supplies

Your Lexmark printer is designed to function best with genuine Lexmark parts and supplies. Use of third-party supplies or parts may affect the performance, reliability, or life of the printer and its imaging components. It can also affect warranty coverage. Damage caused by the use of third-party parts and supplies is not covered by the warranty. All life indicators are designed to function with Lexmark parts and supplies, and may deliver unpredictable results if third-party parts and supplies are used. Imaging component usage beyond the intended life may damage your Lexmark printer or its associated components.

Ordering toner cartridges

  • The estimated cartridge yield is based on the ISO/IEC 19798 standard.
  • Extremely low print coverage for extended periods of time may negatively affect actual yield and may cause cartridge parts to fail before exhaustion of toner.

CS720 and CS725 Return Program cartridges

European Economic Area (EEA+)

Rest of Asia Pacific (RoAP)

Rest of Europe, Middle East,

Australia and New Zealand

(LAD)

(ANZ)

Return Program toner cartridges1

Black 74C10K0 74C20K0 74C30K0 74C40K0 74C50K0 74C60K0

Cyan 74C10C0 74C20C0 74C30C0 74C40C0 74C50C0 74C60C0

Magenta 74C10M0 74C20M0 74C30M0 74C40M0 74C50M0 74C60M0

Yellow 74C10Y0 74C20Y0 74C30Y0 74C40Y0 74C50Y0 74C60Y0

High Yield Return Program toner cartridges

1 These Return Program toner cartridges are supported in CS720 and CS725.

2 These High Yield Return Program toner cartridges are supported only in CS725.

Show 6 more labels / short text on this page
Item United States · Latin America · and Canada · Distribution · and Africa · (RoEMEA)
Page 38 of the Lexmark CS725 user manual — CS727 and CS728 Return Program cartridges
Page 38 · click to enlarge
Page 38

Maintaining the printer 38

Lexmark CS725 — Ordering supplies diagram (page 38)
Fig. 23 · Ordering supplies

1 These Return Program toner cartridges are supported in CS720 and CS725.

2 These High Yield Return Program toner cartridges are supported only in CS725.

Regular toner cartridges

Lexmark CS725 — Regular toner cartridges diagram (page 38)
Fig. 24 · Regular toner cartridges

* This toner cartridge is also supported in CS720.

CS727 and CS728 Return Program cartridges

Lexmark CS725 — CS727 and CS728 Return Program cartridges diagram (page 38)
Fig. 25 · CS727 and CS728 Return Program cartridges
Page 39 of the Lexmark CS725 user manual — Ordering a fuser maintenance kit
Page 39 · click to enlarge
Page 39

Maintaining the printer 39

Lexmark CS725 — Ordering imaging unit or imaging kit diagram (page 39)
Fig. 26 · Ordering imaging unit or imaging kit

CS727 and CS728 Regular cartridges

Lexmark CS725 — CS727 and CS728 Regular cartridges diagram (page 39)
Fig. 27 · CS727 and CS728 Regular cartridges

Ordering imaging unit or imaging kit

Lexmark CS725 — Ordering imaging unit or imaging kit diagram (page 39)
Fig. 28 · Ordering imaging unit or imaging kit

Ordering a waste toner bottle

Waste toner bottle 74C0W00

Ordering a fuser maintenance kit

Lexmark CS725 — Ordering a fuser maintenance kit diagram (page 39)
Fig. 29 · Ordering a fuser maintenance kit

CS72x fuser maintenance kit, type 00, 110–120 V 41X0554

CS72x fuser maintenance kit, type 01, 220–240 V 41X0556

CS72x fuser maintenance kit, type 02, 100 V 41X0552

Item Part number

Page 40 of the Lexmark CS725 user manual — Ordering a transfer module
Page 40 · click to enlarge
Page 40

Maintaining the printer 40

Ordering a transfer module

Replacing parts and supplies

Replacing the imaging unit

1 Open door B.

Lexmark CS725 — Ordering a transfer module diagram (page 40)
Fig. 30 · Ordering a transfer module
Lexmark CS725 — Ordering a transfer module diagram (page 40)
Fig. 31 · Ordering a transfer module
Lexmark CS725 — Ordering a transfer module diagram (page 40)
Fig. 32 · Ordering a transfer module
Lexmark CS725 — Ordering a transfer module diagram (page 40)
Fig. 33 · Ordering a transfer module

Item Part number · Transfer module 40X9929

Page 41 of the Lexmark CS725 user manual — Ordering a transfer module
Page 41 · click to enlarge
Page 41

Maintaining the printer 41

2 Remove the waste toner bottle.

Lexmark CS725 — Ordering a transfer module diagram (page 41)
Fig. 34 · Ordering a transfer module

3 Remove the imaging kit.

Lexmark CS725 — Ordering a transfer module diagram (page 41)
Fig. 35 · Ordering a transfer module
Page 42 of the Lexmark CS725 user manual — Ordering a transfer module
Page 42 · click to enlarge
Page 42

Maintaining the printer 42

4 Remove the black toner cartridge.

Lexmark CS725 — Ordering a transfer module diagram (page 42)
Fig. 36 · Ordering a transfer module
Lexmark CS725 — Ordering a transfer module diagram (page 42)
Fig. 37 · Ordering a transfer module

5 Remove the imaging unit.

Lexmark CS725 — Ordering a transfer module diagram (page 42)
Fig. 38 · Ordering a transfer module
Lexmark CS725 — Ordering a transfer module diagram (page 42)
Fig. 39 · Ordering a transfer module
Lexmark CS725 — Ordering a transfer module diagram (page 42)
Fig. 40 · Ordering a transfer module
Lexmark CS725 — Ordering a transfer module diagram (page 42)
Fig. 41 · Ordering a transfer module

6 Unpack the new imaging unit.

7 Insert the new imaging unit.

Lexmark CS725 — Ordering a transfer module diagram (page 42)
Fig. 42 · Ordering a transfer module
Lexmark CS725 — Ordering a transfer module diagram (page 42)
Fig. 43 · Ordering a transfer module
Page 43 of the Lexmark CS725 user manual — Ordering a transfer module
Page 43 · click to enlarge
Page 43

Maintaining the printer 43

8 Insert the black toner cartridge.

Lexmark CS725 — Ordering a transfer module diagram (page 43)
Fig. 44 · Ordering a transfer module
Lexmark CS725 — Ordering a transfer module diagram (page 43)
Fig. 45 · Ordering a transfer module

9 Insert the imaging kit.

Lexmark CS725 — Ordering a transfer module diagram (page 43)
Fig. 46 · Ordering a transfer module
Lexmark CS725 — Ordering a transfer module diagram (page 43)
Fig. 47 · Ordering a transfer module
Lexmark CS725 — Ordering a transfer module diagram (page 43)
Fig. 48 · Ordering a transfer module
Lexmark CS725 — Ordering a transfer module diagram (page 43)
Fig. 49 · Ordering a transfer module
Lexmark CS725 — Ordering a transfer module diagram (page 43)
Fig. 50 · Ordering a transfer module
Lexmark CS725 — Ordering a transfer module diagram (page 43)
Fig. 51 · Ordering a transfer module
Lexmark CS725 — Ordering a transfer module diagram (page 43)
Fig. 52 · Ordering a transfer module
Page 44 of the Lexmark CS725 user manual — Replacing the imaging kit
Page 44 · click to enlarge
Page 44

Maintaining the printer 44

10 Insert the waste toner bottle.

Lexmark CS725 — Replacing the imaging kit diagram (page 44)
Fig. 53 · Replacing the imaging kit
Lexmark CS725 — Replacing the imaging kit diagram (page 44)
Fig. 54 · Replacing the imaging kit
Lexmark CS725 — Replacing the imaging kit diagram (page 44)
Fig. 55 · Replacing the imaging kit
Lexmark CS725 — Replacing the imaging kit diagram (page 44)
Fig. 56 · Replacing the imaging kit

11 Close door B.

Replacing the imaging kit

1 Open door B.

Page 45 of the Lexmark CS725 user manual — Replacing the imaging kit
Page 45 · click to enlarge
Page 45

Maintaining the printer 45

2 Remove the waste toner bottle.

Lexmark CS725 — Replacing the imaging kit diagram (page 45)
Fig. 57 · Replacing the imaging kit

3 Remove the imaging kit.

Lexmark CS725 — Replacing the imaging kit diagram (page 45)
Fig. 58 · Replacing the imaging kit
Page 46 of the Lexmark CS725 user manual — Replacing the imaging kit
Page 46 · click to enlarge
Page 46

Maintaining the printer 46

4 Remove the toner cartridges.

Lexmark CS725 — Replacing the imaging kit diagram (page 46)
Fig. 59 · Replacing the imaging kit
Lexmark CS725 — Replacing the imaging kit diagram (page 46)
Fig. 60 · Replacing the imaging kit
Lexmark CS725 — Replacing the imaging kit diagram (page 46)
Fig. 61 · Replacing the imaging kit
Lexmark CS725 — Replacing the imaging kit diagram (page 46)
Fig. 62 · Replacing the imaging kit

5 Unpack the new imaging kit, and then remove the packing material.

6 Remove the black imaging unit.

Lexmark CS725 — Replacing the imaging kit diagram (page 46)
Fig. 63 · Replacing the imaging kit
Lexmark CS725 — Replacing the imaging kit diagram (page 46)
Fig. 64 · Replacing the imaging kit

7 Insert the black imaging unit into the new imaging kit.

Lexmark CS725 — Replacing the imaging kit diagram (page 46)
Fig. 65 · Replacing the imaging kit
Lexmark CS725 — Replacing the imaging kit diagram (page 46)
Fig. 66 · Replacing the imaging kit
Lexmark CS725 — Replacing the imaging kit diagram (page 46)
Fig. 67 · Replacing the imaging kit
Page 47 of the Lexmark CS725 user manual — Replacing the imaging kit
Page 47 · click to enlarge
Page 47

Maintaining the printer 47

8 Insert the toner cartridges.

Lexmark CS725 — Replacing the imaging kit diagram (page 47)
Fig. 68 · Replacing the imaging kit
Lexmark CS725 — Replacing the imaging kit diagram (page 47)
Fig. 69 · Replacing the imaging kit
Lexmark CS725 — Replacing the imaging kit diagram (page 47)
Fig. 70 · Replacing the imaging kit
Lexmark CS725 — Replacing the imaging kit diagram (page 47)
Fig. 71 · Replacing the imaging kit

9 Insert the new imaging kit.

Page 48 of the Lexmark CS725 user manual — Replacing a toner cartridge
Page 48 · click to enlarge
Page 48

Maintaining the printer 48

10 Insert the waste toner bottle.

11 Close door B.

Replacing a toner cartridge

1 Open door B.

Page 49 of the Lexmark CS725 user manual — Replacing a toner cartridge
Page 49 · click to enlarge
Page 49

Maintaining the printer 49

2 Remove the toner cartridge.

Lexmark CS725 — Replacing a toner cartridge diagram (page 49)
Fig. 72 · Replacing a toner cartridge
Lexmark CS725 — Replacing a toner cartridge diagram (page 49)
Fig. 73 · Replacing a toner cartridge
Lexmark CS725 — Replacing a toner cartridge diagram (page 49)
Fig. 74 · Replacing a toner cartridge

3 Unpack the new toner cartridge.

4 Insert the new toner cartridge.

Lexmark CS725 — Replacing a toner cartridge diagram (page 49)
Fig. 75 · Replacing a toner cartridge
Lexmark CS725 — Replacing a toner cartridge diagram (page 49)
Fig. 76 · Replacing a toner cartridge

5 Close door B.

Page 50 of the Lexmark CS725 user manual — Replacing the waste toner bottle
Page 50 · click to enlarge
Page 50

Maintaining the printer 50

Replacing the waste toner bottle

1 Open door B.

2 Remove the waste toner bottle.

Lexmark CS725 — Replacing the waste toner bottle diagram (page 50)
Fig. 77 · Replacing the waste toner bottle
Lexmark CS725 — Replacing the waste toner bottle diagram (page 50)
Fig. 78 · Replacing the waste toner bottle
Lexmark CS725 — Replacing the waste toner bottle diagram (page 50)
Fig. 79 · Replacing the waste toner bottle
Lexmark CS725 — Replacing the waste toner bottle diagram (page 50)
Fig. 80 · Replacing the waste toner bottle
Lexmark CS725 — Replacing the waste toner bottle diagram (page 50)
Fig. 81 · Replacing the waste toner bottle
Lexmark CS725 — Replacing the waste toner bottle diagram (page 50)
Fig. 82 · Replacing the waste toner bottle

3 Unpack the new waste toner bottle.

Page 51 of the Lexmark CS725 user manual — Replacing the fuser
Page 51 · click to enlarge
Page 51

Maintaining the printer 51

4 Insert the new waste toner bottle.

5 Close door B.

Replacing the fuser

1 Turn off the printer, and then unplug the power cord from the electrical outlet.

2 Open doors A and D.

Lexmark CS725 — Replacing the fuser diagram (page 51)
Fig. 83 · Replacing the fuser
Lexmark CS725 — Replacing the fuser diagram (page 51)
Fig. 84 · Replacing the fuser

3 Remove the fuser.

Lexmark CS725 — Replacing the fuser diagram (page 51)
Fig. 85 · Replacing the fuser
Lexmark CS725 — Replacing the fuser diagram (page 51)
Fig. 86 · Replacing the fuser
Lexmark CS725 — Replacing the fuser diagram (page 51)
Fig. 87 · Replacing the fuser

4 Unpack the new fuser.

Page 52 of the Lexmark CS725 user manual — Replacing the pick roller
Page 52 · click to enlarge
Page 52

Maintaining the printer 52

5 Insert the new fuser.

Lexmark CS725 — Replacing the pick roller diagram (page 52)
Fig. 88 · Replacing the pick roller
Lexmark CS725 — Replacing the pick roller diagram (page 52)
Fig. 89 · Replacing the pick roller
Lexmark CS725 — Replacing the pick roller diagram (page 52)
Fig. 90 · Replacing the pick roller

6 Close doors D and A.

7 Connect the power cord to the electrical outlet, and then turn on the printer.

8 Reset the fuser maintenance counter.

For more information, see “Resetting the maintenance counter” on page 61.

Replacing the pick roller

Replacing the pick roller in the 550‑sheet tray

1 Turn off the printer, and then unplug the power cord from the electrical outlet.

2 Remove the tray.

Page 53 of the Lexmark CS725 user manual — Replacing the pick roller
Page 53 · click to enlarge
Page 53

Maintaining the printer 53

3 Remove the pick roller.

Lexmark CS725 — Replacing the pick roller diagram (page 53)
Fig. 91 · Replacing the pick roller
Lexmark CS725 — Replacing the pick roller diagram (page 53)
Fig. 92 · Replacing the pick roller
Lexmark CS725 — Replacing the pick roller diagram (page 53)
Fig. 93 · Replacing the pick roller
Lexmark CS725 — Replacing the pick roller diagram (page 53)
Fig. 94 · Replacing the pick roller

4 Unpack the new pick roller.

Page 54 of the Lexmark CS725 user manual — Replacing the pick roller in the multipurpose feeder
Page 54 · click to enlarge
Page 54

Maintaining the printer 54

5 Insert the new pick roller until it clicks into place.

Lexmark CS725 — Replacing the pick roller diagram (page 54)
Fig. 95 · Replacing the pick roller
Lexmark CS725 — Replacing the pick roller diagram (page 54)
Fig. 96 · Replacing the pick roller
Lexmark CS725 — Replacing the pick roller diagram (page 54)
Fig. 97 · Replacing the pick roller

6 Insert the tray.

7 Connect the power cord to the electrical outlet, and then turn on the printer.

Replacing the pick roller in the multipurpose feeder

1 Turn off the printer, and then unplug the power cord from the electrical outlet.

2 Open the multipurpose feeder.

Lexmark CS725 — Replacing the pick roller in the multipurpose feeder diagram (page 54)
Fig. 98 · Replacing the pick roller in the multipurpose feeder
Lexmark CS725 — Replacing the pick roller in the multipurpose feeder diagram (page 54)
Fig. 99 · Replacing the pick roller in the multipurpose feeder
Page 55 of the Lexmark CS725 user manual — Replacing the separator pad
Page 55 · click to enlarge
Page 55

Maintaining the printer 55

3 Remove the pick roller.

Lexmark CS725 — Replacing the separator pad diagram (page 55)
Fig. 100 · Replacing the separator pad
Lexmark CS725 — Replacing the separator pad diagram (page 55)
Fig. 101 · Replacing the separator pad
Lexmark CS725 — Replacing the separator pad diagram (page 55)
Fig. 102 · Replacing the separator pad
Lexmark CS725 — Replacing the separator pad diagram (page 55)
Fig. 103 · Replacing the separator pad

4 Unpack the new pick roller.

5 Insert the new pick roller until it clicks into place.

Lexmark CS725 — Replacing the separator pad diagram (page 55)
Fig. 104 · Replacing the separator pad
Lexmark CS725 — Replacing the separator pad diagram (page 55)
Fig. 105 · Replacing the separator pad
Lexmark CS725 — Replacing the separator pad diagram (page 55)
Fig. 106 · Replacing the separator pad
Lexmark CS725 — Replacing the separator pad diagram (page 55)
Fig. 107 · Replacing the separator pad

6 Close the multipurpose feeder.

7 Connect the power cord to the electrical outlet, and then turn on the printer.

Replacing the separator pad

1 Pull out the tray.

Lexmark CS725 — Replacing the separator pad diagram (page 55)
Fig. 108 · Replacing the separator pad
Lexmark CS725 — Replacing the separator pad diagram (page 55)
Fig. 109 · Replacing the separator pad
Page 56 of the Lexmark CS725 user manual — Replacing the separator pad
Page 56 · click to enlarge
Page 56

Maintaining the printer 56

2 Remove the separator pad.

Lexmark CS725 — Replacing the separator pad diagram (page 56)
Fig. 110 · Replacing the separator pad
Lexmark CS725 — Replacing the separator pad diagram (page 56)
Fig. 111 · Replacing the separator pad
Lexmark CS725 — Replacing the separator pad diagram (page 56)
Fig. 112 · Replacing the separator pad
Lexmark CS725 — Replacing the separator pad diagram (page 56)
Fig. 113 · Replacing the separator pad

3 Unpack the new separator pad.

4 Insert the new separator pad until it clicks into place.

Lexmark CS725 — Replacing the separator pad diagram (page 56)
Fig. 114 · Replacing the separator pad
Lexmark CS725 — Replacing the separator pad diagram (page 56)
Fig. 115 · Replacing the separator pad
Lexmark CS725 — Replacing the separator pad diagram (page 56)
Fig. 116 · Replacing the separator pad

5 Insert the tray.

Page 57 of the Lexmark CS725 user manual — Replacing the transfer module
Page 57 · click to enlarge
Page 57

Maintaining the printer 57

Replacing the transfer module

1 Turn off the printer, and then unplug the power cord from the electrical outlet.

2 Open door B.

3 Remove the waste toner bottle.

Lexmark CS725 — Replacing the transfer module diagram (page 57)
Fig. 117 · Replacing the transfer module
Lexmark CS725 — Replacing the transfer module diagram (page 57)
Fig. 118 · Replacing the transfer module
Lexmark CS725 — Replacing the transfer module diagram (page 57)
Fig. 119 · Replacing the transfer module
Lexmark CS725 — Replacing the transfer module diagram (page 57)
Fig. 120 · Replacing the transfer module
Page 58 of the Lexmark CS725 user manual — Replacing the transfer module
Page 58 · click to enlarge
Page 58

Maintaining the printer 58

4 Remove the imaging kit.

Lexmark CS725 — Replacing the transfer module diagram (page 58)
Fig. 121 · Replacing the transfer module
Lexmark CS725 — Replacing the transfer module diagram (page 58)
Fig. 122 · Replacing the transfer module
Lexmark CS725 — Replacing the transfer module diagram (page 58)
Fig. 123 · Replacing the transfer module
Lexmark CS725 — Replacing the transfer module diagram (page 58)
Fig. 124 · Replacing the transfer module
Lexmark CS725 — Replacing the transfer module diagram (page 58)
Fig. 125 · Replacing the transfer module
Lexmark CS725 — Replacing the transfer module diagram (page 58)
Fig. 126 · Replacing the transfer module

5 Open door A.

Lexmark CS725 — Replacing the transfer module diagram (page 58)
Fig. 127 · Replacing the transfer module
Lexmark CS725 — Replacing the transfer module diagram (page 58)
Fig. 128 · Replacing the transfer module
Page 59 of the Lexmark CS725 user manual — Replacing the transfer module
Page 59 · click to enlarge
Page 59

Maintaining the printer 59

6 Remove the transfer module.

Lexmark CS725 — Replacing the transfer module diagram (page 59)
Fig. 129 · Replacing the transfer module
Lexmark CS725 — Replacing the transfer module diagram (page 59)
Fig. 130 · Replacing the transfer module
Lexmark CS725 — Replacing the transfer module diagram (page 59)
Fig. 131 · Replacing the transfer module
Lexmark CS725 — Replacing the transfer module diagram (page 59)
Fig. 132 · Replacing the transfer module

7 Unpack the new transfer module, and then remove the packing material.

8 Insert the new transfer module.

Lexmark CS725 — Replacing the transfer module diagram (page 59)
Fig. 133 · Replacing the transfer module
Lexmark CS725 — Replacing the transfer module diagram (page 59)
Fig. 134 · Replacing the transfer module
Lexmark CS725 — Replacing the transfer module diagram (page 59)
Fig. 135 · Replacing the transfer module
Lexmark CS725 — Replacing the transfer module diagram (page 59)
Fig. 136 · Replacing the transfer module

9 Close door A.

Page 60 of the Lexmark CS725 user manual — Replacing the transfer module
Page 60 · click to enlarge
Page 60

Maintaining the printer 60

10 Insert the imaging kit.

11 Insert the waste toner bottle.

12 Close door B.

13 Connect the power cord to the electrical outlet, and then turn on the printer.

14 Reset the maintenance counter. For more information, see “Resetting the maintenance counter” on page 61.

Page 61 of the Lexmark CS725 user manual — Shipping the printer
Page 61 · click to enlarge
Page 61

Maintaining the printer 61

Resetting the maintenance counter

1 From the home screen, touch Settings > Device > Maintenance > Configuration Menu > Supply Usage And Counters.

2 Select Fuser Reset or ITM Reset.

Moving the printer

Moving the printer to another location

  • CAUTION—POTENTIAL INJURY: When moving the printer, follow these guidelines to avoid personal injury or printer damage:
  • Make sure that all doors and trays are closed.
  • Turn off the printer, and then unplug the power cord from the electrical outlet.
  • Disconnect all cords and cables from the printer.
  • If the printer has separate floor-standing optional trays or output options attached to it, then disconnect them before moving the printer.
  • If the printer has a caster base, then carefully roll it to the new location. Use caution when passing over thresholds and breaks in flooring.
  • If the printer does not have a caster base but is configured with optional trays or output options, then remove the output options and lift the printer off the trays. Do not try to lift the printer and any options at the same time.
  • Always use the handholds on the printer to lift it.
  • Any cart used to move the printer must have a surface able to support the full footprint of the printer.
  • Any cart used to move the hardware options must have a surface able to support the dimensions of the options.
  • Keep the printer in an upright position.
  • Avoid severe jarring movements.
  • Make sure that your fingers are not under the printer when you set it down.
  • Make sure that there is adequate clearance around the printer.

Shipping the printer

For shipping instructions, go to http://support.lexmark.com or contact customer support.

Page 62 of the Lexmark CS725 user manual — Recycling Lexmark products
Page 62 · click to enlarge
Page 62

Maintaining the printer 62

Saving energy and paper

Setting up power saver modes

1 From the home screen, touch Settings > Device > Power Management > Eco‑Mode.

2 Select a setting.

Sleep mode

1 From the home screen, touch Settings > Device > Power Management > Timeouts > Sleep Mode.

2 Enter the number of minutes the printer stays idle before it enters Sleep mode.

Hibernate mode

1 From the home screen, touch Settings > Device > Power Management > Timeouts > Hibernate Timeout.

2 Select the amount of time before the printer enters hibernate mode.

  • Make sure to wake the printer from hibernate mode before sending a print job.
  • The Embedded Web Server is disabled when the printer is in hibernate mode.

Adjusting the brightness of the printer display

1 From the home screen, touch Settings > Device > Preferences > Screen Brightness.

2 Adjust the setting.

Conserving supplies

  • Print on both sides of the paper.
  • Note: Two-sided printing is the default setting in the print driver.
  • Print multiple pages on a single sheet of paper.
  • Use the preview feature to see how the document looks like before printing it.
  • Print one copy of the document to check its content and format for accuracy.

Recycling

Recycling Lexmark products

To return Lexmark products for recycling:

1 Go to www.lexmark.com/recycle.

2 Select the product you want to recycle.

Eco‑Mode

Page 63 of the Lexmark CS725 user manual — Returning Lexmark cartridges for reuse or recycling
Page 63 · click to enlarge
Page 63

Maintaining the printer 63

Recycling Lexmark packaging

Lexmark continually strives to minimize packaging. Less packaging helps to ensure that Lexmark printers are transported in the most efficient and environmentally sensitive manner and that there is less packaging to dispose of. These efficiencies result in fewer greenhouse emissions, energy savings, and natural resource savings. Lexmark also offers recycling of packaging components in some countries or regions. For more information, go to www.lexmark.com/recycle, and then choose your country or region. Information on available packaging recycling programs is included with the information on product recycling.

Lexmark cartons are 100% recyclable where corrugated recycling facilities exist. Facilities may not exist in your area.

The foam used in Lexmark packaging is recyclable where foam recycling facilities exist. Facilities may not exist in your area.

When you return a cartridge to Lexmark, you can reuse the box that the cartridge came in. Lexmark recycles the box.

Returning Lexmark cartridges for reuse or recycling

The Lexmark Cartridge Collection Program allows you to return used cartridges for free to Lexmark for reuse or recycling. One hundred percent of the empty cartridges returned to Lexmark are either reused or demanufactured for recycling. The boxes used to return the cartridges are also recycled.

To return Lexmark cartridges for reuse or recycling, do the following:

1 Go to www.lexmark.com/recycle.

2 Select the product that you want to recycle.

Page 64 of the Lexmark CS725 user manual — Use recommended paper
Page 64 · click to enlarge
Page 64

Clearing jams

Avoiding jams

Load paper properly

  • Make sure that the paper lies flat in the tray.

Correct loading of paper Incorrect loading of paper

Lexmark CS725 — Load paper properly diagram (page 64)
Fig. 137 · Load paper properly
  • Do not load or remove a tray while the printer is printing.
  • Do not load too much paper. Make sure that the stack height is below the maximum paper fill indicator.
  • Do not slide paper into the tray. Load paper as shown in the illustration.
Lexmark CS725 — Load paper properly diagram (page 64)
Fig. 138 · Load paper properly
  • Make sure that the paper guides are positioned correctly and are not pressing tightly against the paper or envelopes.
  • Push the tray firmly into the printer after loading paper.

Use recommended paper

  • Use only recommended paper or specialty media.
  • Do not load paper that is wrinkled, creased, damp, bent, or curled.

Clearing jams 64

Page 65 of the Lexmark CS725 user manual — Identifying jam locations
Page 65 · click to enlarge
Page 65
  • Flex, fan, and align the paper edges before loading.
Lexmark CS725 — Identifying jam locations diagram (page 65)
Fig. 139 · Identifying jam locations
  • Do not use paper that has been cut or trimmed by hand.
  • Do not mix paper sizes, weights, or types in the same tray.
  • Make sure that the paper size and type are set correctly on the computer or printer control panel.
  • Store paper according to manufacturer recommendations.

Identifying jam locations

  • When Jam Assist is set to On, the printer flushes blank pages or pages with partial prints after a jammed page has been cleared. Check your printed output for blank pages.
  • When Jam Recovery is set to On or Auto, the printer reprints jammed pages.
Lexmark CS725 — Identifying jam locations diagram (page 65)
Fig. 140 · Identifying jam locations

Clearing jams 65

Page 66 of the Lexmark CS725 user manual — Paper jam in trays
Page 66 · click to enlarge
Page 66

Paper jam in trays

1 Pull out the tray.

Lexmark CS725 — Paper jam in trays diagram (page 66)
Fig. 141 · Paper jam in trays
Lexmark CS725 — Paper jam in trays diagram (page 66)
Fig. 142 · Paper jam in trays

2 Remove the jammed paper.

Lexmark CS725 — Paper jam in trays diagram (page 66)
Fig. 143 · Paper jam in trays
Lexmark CS725 — Paper jam in trays diagram (page 66)
Fig. 144 · Paper jam in trays

3 Insert the tray.

Clearing jams 66

Page 67 of the Lexmark CS725 user manual — Paper jam in the standard bin
Page 67 · click to enlarge
Page 67

Paper jam in the multipurpose feeder

1 Remove paper from the multipurpose feeder.

2 Pull out the tray.

3 Remove the jammed paper.

Lexmark CS725 — Paper jam in the multipurpose feeder diagram (page 67)
Fig. 145 · Paper jam in the multipurpose feeder

4 Insert the tray.

Paper jam in the standard bin

1 Remove the jammed paper.

Lexmark CS725 — Paper jam in the standard bin diagram (page 67)
Fig. 146 · Paper jam in the standard bin
Lexmark CS725 — Paper jam in the standard bin diagram (page 67)
Fig. 147 · Paper jam in the standard bin

2 Open doors A and D, and then remove any paper fragments.

Clearing jams 67

Page 68 of the Lexmark CS725 user manual — Paper jam in the fuser
Page 68 · click to enlarge
Page 68
Lexmark CS725 — Paper jam in door A diagram (page 68)
Fig. 148 · Paper jam in door A
Lexmark CS725 — Paper jam in door A diagram (page 68)
Fig. 149 · Paper jam in door A
Lexmark CS725 — Paper jam in door A diagram (page 68)
Fig. 150 · Paper jam in door A

3 Close doors D and A.

Paper jam in door A

Paper jam in the fuser

1 Open door A.

Lexmark CS725 — Paper jam in the fuser diagram (page 68)
Fig. 151 · Paper jam in the fuser
Lexmark CS725 — Paper jam in the fuser diagram (page 68)
Fig. 152 · Paper jam in the fuser

2 Remove the jammed paper.

Clearing jams 68

Page 69 of the Lexmark CS725 user manual — Paper jam in door A
Page 69 · click to enlarge
Page 69
Lexmark CS725 — Paper jam in door A diagram (page 69)
Fig. 153 · Paper jam in door A
Lexmark CS725 — Paper jam in door A diagram (page 69)
Fig. 154 · Paper jam in door A

3 Open the fuser access door.

Lexmark CS725 — Paper jam in door A diagram (page 69)
Fig. 155 · Paper jam in door A
Lexmark CS725 — Paper jam in door A diagram (page 69)
Fig. 156 · Paper jam in door A

4 Remove the jammed paper.

Clearing jams 69

Page 70 of the Lexmark CS725 user manual — Paper jam in the duplex unit
Page 70 · click to enlarge
Page 70
Lexmark CS725 — Paper jam in door A diagram (page 70)
Fig. 157 · Paper jam in door A
Lexmark CS725 — Paper jam in door A diagram (page 70)
Fig. 158 · Paper jam in door A

5 Close door A.

Paper jam in the duplex unit

1 Open door A.

Clearing jams 70

Page 71 of the Lexmark CS725 user manual — Paper jam in door A
Page 71 · click to enlarge
Page 71

2 Open the duplex cover.

Lexmark CS725 — Paper jam in door A diagram (page 71)
Fig. 159 · Paper jam in door A
Lexmark CS725 — Paper jam in door A diagram (page 71)
Fig. 160 · Paper jam in door A
Lexmark CS725 — Paper jam in door A diagram (page 71)
Fig. 161 · Paper jam in door A

3 Remove the jammed paper.

Lexmark CS725 — Paper jam in door A diagram (page 71)
Fig. 162 · Paper jam in door A
Lexmark CS725 — Paper jam in door A diagram (page 71)
Fig. 163 · Paper jam in door A

4 Close the duplex cover and door A.

Clearing jams 71

Page 72 of the Lexmark CS725 user manual — Cannot open Embedded Web Server
Page 72 · click to enlarge
Page 72

Troubleshooting

Network connection problems

Cannot open Embedded Web Server

Step 1 Check if you are using a supported browser:

Go to step 2. Install a supported browser.

  • Internet Explorer® version 9 or later
  • Safari version 8.0.3 or later
  • Google Chrome TM
  • Mozilla Firefox

Is your browser supported?

Go to step 3. Type the correct printer IP address in the address field.

Make sure that the printer IP address is correct.

View the printer IP address:

  • From the home screen
  • From the TCP/IP section in the Network/Ports menu
  • By printing a network setup page or menu settings page, and then finding the TCP/IP section

Is the printer IP address correct?

Go to step 4. Turn on the printer.

Check if the printer is on.

Is the printer on?

Go to step 5. Contact your administrator.

Check if the network connection is working.

Is the network connection working?

Go to step 6. Secure the cable connections.

Make sure that the cable connections to the printer and print server are secure.

For more information, see the setup documentation that came with the printer.

Are the cable connections secure?

Show 6 more labels / short text on this page
Troubleshooting 72 · Action Yes No · Step 2 · Step 3 · Step 4 · Step 5
Page 73 of the Lexmark CS725 user manual — Checking the printer connectivity
Page 73 · click to enlarge
Page 73

Go to step 7. Contact your administrator.

Check if the web proxy servers are disabled.

Are the web proxy servers disabled?

Step 7 Access the Embedded Web Server.

The problem is solved.

Contact customer support.

Did the Embedded Web Server open?

Unable to read flash drive

Go to step 2. The problem is solved.

Check if the flash drive is inserted into the front USB port.

Is the flash drive inserted into the front USB port?

Go to step 3. The problem is solved.

Check if the flash drive is supported. For more information, see “Supported flash drives and file types” on page 29

Does the error message still appear?

Contact customer support.

The problem is solved.

Check if the front USB port is disabled. For more information, see “Enabling the USB port” on page 73.

Does the error message still appear?

Enabling the USB port

From the home screen, touch Settings > Network/Ports > USB > Enable USB Port.

Checking the printer connectivity

1 From the home screen, touch Settings > Reports > Network > Network Setup Page.

2 Check the first section of the network setup page, and confirm that the status is connected.

If the status is not connected, then the LAN drop may be inactive, or the network cable may be unplugged or malfunctioning. Contact your administrator for assistance.

Show 7 more labels / short text on this page
Troubleshooting 73 · Action Yes No · Step 6 · Action Yes No · Step 1 · Step 2 · Step 3
Page 74 of the Lexmark CS725 user manual — Cannot detect internal option
Page 74 · click to enlarge
Page 74

Hardware options problems

Cannot detect internal option

The problem is solved.

Go to step 2.

Turn off the printer, wait for about 10 seconds, and then turn it back on.

Does the internal option operate correctly?

Go to step 4. Go to step 3.

Print a menu settings page, and then check if the internal option appears in the Installed Features list.

Is the internal option listed in the menu settings page?

The problem is solved.

Go to step 4.

Check if the internal option is properly installed in the controller board.

a Turn off the printer, and then unplug the power cord from the

electrical outlet. b Make sure that the internal option is installed in the appropriate

connector in the controller board. c Connect the power cord to the electrical outlet, and then turn

on the printer.

Does the internal option operate correctly?

The problem is solved.

Contact customer support.

a Check if the internal option is available in the print driver.

Does the internal option operate correctly?

Show 6 more labels / short text on this page
Troubleshooting 74 · Action Yes No · Step 1 · Step 2 · Step 3 · Step 4
Page 75 of the Lexmark CS725 user manual — Parallel or serial interface card does not operate correctly
Page 75 · click to enlarge
Page 75

Internal solutions port does not operate correctly

Go to step 3. Go to step 2.

Print a menu settings page, and then check if the internal solutions port (ISP) appears in the Installed Features list.

Is the ISP listed in the Installed Features list?

The problem is solved.

Go to step 3.

Remove, and then install the ISP. For more information, see “Installing an internal solutions port” on page 107.

Does the ISP operate correctly?

The problem is solved.

Contact customer support.

Check the cable and the ISP connection.

a Use the correct cable, and then make sure that it is securely

connected to the ISP. b Check if the ISP solution interface cable is securely connected

into the receptacle of the controller board.

Does the ISP operate correctly?

Parallel or serial interface card does not operate correctly

Go to step 3. Go to step 2.

Print a menu settings page, and then check if the parallel or serial interface card appears in the Installed Features list.

Is the parallel or serial interface card listed in the Installed Features list?

The problem is solved.

Go to step 3.

Remove, and then install the parallel or serial interface card. For more information, see “Installing an internal solutions port” on page 107.

Does the parallel or serial interface card operate correctly?

The problem is solved.

Contact customer support.

Check the connection between the cable and the parallel or serial interface card.

Does the parallel or serial interface card operate correctly?

Show 9 more labels / short text on this page
Troubleshooting 75 · Action Yes No · Step 1 · Step 2 · Step 3 · Action Yes No · Step 1 · Step 2 · Step 3
Page 76 of the Lexmark CS725 user manual — Printer and toner cartridge regions
Page 76 · click to enlarge
Page 76

Defective flash detected

Try one or more of the following:

  • Replace the defective flash memory.
  • From the printer control panel, select Continue to ignore the message and continue printing.
  • Cancel the current print job.

Not enough free space in flash memory for resources

Try one or more of the following:

  • From the printer control panel, select Continue to clear the message and continue printing.
  • Delete fonts, macros, and other data stored in the flash memory.
  • Install flash memory with larger capacity.

Unformatted flash detected

Try one or more of the following:

  • From the control panel, select Continue to stop the defragmentation and continue printing.
  • Format the flash memory.

Issues with supplies

Replace cartridge, printer region mismatch

To correct this problem, purchase a cartridge with the correct region that matches the printer region, or purchase a worldwide cartridge.

  • The first number in the message after 42 indicates the region of the printer.
  • The second number in the message after 42 indicates the region of the cartridge.

Printer and toner cartridge regions

Worldwide or Undefined region 0

North America (United States, Canada) 1

European Economic Area, Western Europe, Nordic countries, Switzerland 2

Rest of Europe, Middle East, Africa 5

Australia, New Zealand 6

Show 4 more labels / short text on this page
Troubleshooting 76 · Region Numeric code · Asia Pacific 3 · Latin America 4
Page 77 of the Lexmark CS725 user manual — Envelope seals when printing
Page 77 · click to enlarge
Page 77

Non ‑ Lexmark supply

The printer has detected a non‑Lexmark supply or part installed in the printer.

Your Lexmark printer is designed to function best with genuine Lexmark supplies and parts. Use of third- party supplies or parts may affect the performance, reliability, or life of the printer and its imaging components.

All life indicators are designed to function with Lexmark supplies and parts and may deliver unpredictable results if third-party supplies or parts are used. Imaging component usage beyond the intended life may damage your Lexmark printer or associated components.

To accept any and all of these risks and to proceed with the use of non-genuine supplies or parts in your printer, from the control panel, press and hold X and # simultaneously for 15 seconds.

If you do not want to accept these risks, then remove the third-party supply or part from your printer and install a genuine Lexmark supply or part. For more information, see “Using genuine Lexmark parts and supplies” on page 37.

If the printer does not print after pressing and holding X and # simultaneously for 15 seconds, then reset the supply usage counter.

1 From the control panel, navigate to:

Settings > Device > Maintenance > Configuration Menu > Supply Usage And Counters

2 Select the part or supply that you want to reset, and then select Start.

3 Read the warning message, and then select Continue.

4 Press and hold X and # simultaneously for 15 seconds to clear the message.

Paper feed problems

Envelope seals when printing

1 Use envelopes that have been stored in a dry environment.

Contact customer support.

The problem is solved.

Does the envelope seal when printing?

Show 4 more labels / short text on this page
Troubleshooting 77 · Region Numeric code · Invalid region 9 · Action Yes No
Page 78 of the Lexmark CS725 user manual — Paper curl
Page 78 · click to enlarge
Page 78

Collated printing does not work

The problem is solved.

Go to step 2.

a From the home screen, touch Settings > Print > Layout >

Collate. b Set Collate to On.

c Print the document.

Are the pages collated correctly?

The problem is solved.

Go to step 3.

a From the document that you are trying to print, open the Print

dialog, and then select Collate. b Print the document.

Are the pages collated correctly?

The problem is solved.

Contact customer support.

a Reduce the number of pages to print. b Print the document.

Are the pages collated correctly?

Paper curl

Go to step 2. The problem is solved.

Move the paper guides in the tray to the correct position for the paper loaded.

Is the paper still curled?

Go to step 3. The problem is solved.

a Depending on your operating system, specify the paper type

and weight from the Printing Preferences or Print dialog.

  • Make sure that the settings match the paper loaded in the tray.
  • You can also change the settings on the printer control panel. b Resend the print job.

Is the paper still curled?

Show 8 more labels / short text on this page
Troubleshooting 78 · Action Yes No · Step 1 · Step 2 · Step 3 · Action Yes No · Step 1 · Step 2
Page 79 of the Lexmark CS725 user manual — Check tray connection
Page 79 · click to enlarge
Page 79

Go to step 4. The problem is solved.

a Remove paper from the tray, and then turn it over. b Resend the print job.

Is the paper still curled?

Contact customer support.

The problem is solved.

a Load paper from a fresh package.

Is the paper still curled?

Tray linking does not work

The problem is solved.

Go to step 2.

a Check if the trays contain paper of the same size and type. b Check if the paper guides are positioned correctly.

c Print the document.

Do the trays link correctly?

The problem is solved.

Contact customer support.

a From the home screen, touch Settings > Paper > Tray

Configuration > Paper Size/Type. b Set the paper size and type to match the paper loaded in the

linked trays. c Print the document.

Do the trays link correctly?

Check tray connection

Try one or more of the following:

  • Turn off the printer, wait for about 10 seconds, and then turn it back on.

If the error occurs a second time, then:

1 Turn off the printer. 2 Unplug the power cord from the electrical outlet. 3 Remove the indicated tray. 4 Insert the tray.

Show 7 more labels / short text on this page
Troubleshooting 79 · Action Yes No · Step 3 · Step 4 · Action Yes No · Step 1 · Step 2
Page 80 of the Lexmark CS725 user manual — Paper frequently jams
Page 80 · click to enlarge
Page 80

5 Connect the power cord to the electrical outlet.

If the error occurs again, then:

1 Turn off the printer. 2 Unplug the power cord from the electrical outlet. 3 Remove the indicated tray. 4 Contact customer support. • From the control panel, select Continue to clear the message and resume printing.

Paper frequently jams

Go to step 2. The problem is solved.

a Pull out the tray. b Check if the paper is loaded correctly.

  • Make sure that the paper guides are positioned correctly.
  • Make sure that the stack height is below the maximum paper fill indicator.
  • Make sure to print on recommended paper size and type. c Insert the tray. d Print the document.

Do paper jams still occur frequently?

Go to step 3. The problem is solved.

a From the Paper menu on the control panel, check if the printer

is detecting the correct paper size. b Resend the print job.

Do paper jams still occur frequently?

Contact customer support.

The problem is solved.

a Load paper from a fresh package. b Print the document.

Do paper jams still occur frequently?

Show 5 more labels / short text on this page
Troubleshooting 80 · Action Yes No · Step 1 · Step 2 · Step 3
Page 81 of the Lexmark CS725 user manual — Confidential and other held documents do not print
Page 81 · click to enlarge
Page 81

Jammed pages are not reprinted

1 From the home screen, touch Settings > Device > Notifications > Jam Content Recovery. 2 Select On or Auto. 3 Apply the changes.

The problem is solved.

Contact customer support.

Are the jammed pages reprinted?

Printing problems

Confidential and other held documents do not print

The problem is solved.

Go to step 2.

a From the control panel, check if the documents appear in the

Held Jobs list.

Are the documents printed?

The problem is solved.

Go to step 3.

The print job may contain a formatting error or invalid data.

  • Delete the print job, and then send it again.
  • For PDF files, generate a new file, and then print the documents.

Are the documents printed?

The problem is solved.

Go to step 4.

If you are printing from the Internet, then the printer may be reading the multiple job titles as duplicates.

a Open the Printing Preferences dialog. b From the Print and Hold section, select Keep duplicate

documents. c Enter a PIN. d Resend the print job.

a Save and name each job differently. b Send the job individually.

Are the documents printed?

Show 8 more labels / short text on this page
Troubleshooting 81 · Action Yes No · Action Yes No · Step 1 · Step 2 · Step 3 · For Windows users · For Macintosh users
Page 82 of the Lexmark CS725 user manual — Slow printing
Page 82 · click to enlarge
Page 82

The problem is solved.

Go to step 5.

a Delete some held jobs to free up printer memory. b Resend the print job.

Are the documents printed?

The problem is solved.

Contact customer support.

a Add printer memory. b Resend the print job.

Are the documents printed?

Slow printing

Go to step 2. The problem is solved.

a Make sure that the printer is not in Eco‑Mode and Quiet Mode. b Print the document.

Is the printer printing slow?

Go to step 3. The problem is solved.

a Depending on your operating system, specify the paper type

from the Printing Preferences or Print dialog.

  • Make sure that the setting matches the paper loaded in the tray.
  • You can also change the setting on the printer control panel. b Print the document.

Is the printer printing slow?

Go to step 4. The problem is solved.

a Reduce the number of pages to print. b Print the document.

Is the printer printing slow?

Go to step 5. The problem is solved.

a Remove held jobs. b Print the document.

Is the printer printing slow?

Show 9 more labels / short text on this page
Troubleshooting 82 · Action Yes No · Step 4 · Step 5 · Action Yes No · Step 1 · Step 2 · Step 3 · Step 4
Page 83 of the Lexmark CS725 user manual — Print jobs do not print
Page 83 · click to enlarge
Page 83

Go to step 6. The problem is solved.

a Connect the printer cable securely to the printer and the

computer, print server, option, or other network device. b Print the document.

Is the printer printing slow?

Go to step 7. The problem is solved.

a From the Quality menu on the control panel, set the Print

Resolution to 4800CQ. b Print the document.

Is the printer printing slow?

Go to step 8. The problem is solved.

a Make sure that the printer is not overheating.

  • Allow the printer to cool down after a long print job.
  • Observe the recommended ambient temperature for the printer. For more information, see “Selecting a location for the printer” on page 9 . b Print the document.

Is the printer printing slow?

Contact customer support.

The problem is solved.

a Add more printer memory. b Print the document.

Is the printer printing slow?

Print jobs do not print

The problem is solved.

Go to step 2.

a From the document you are trying to print, open the Print

dialog, and then check if you have selected the correct printer. b Resend the print job.

Is the document printed?

The problem is solved.

Go to step 3.

a Check if the printer is on. b Resolve any error messages that appear on the display.

c Resend the print job.

Is the document printed?

Show 9 more labels / short text on this page
Troubleshooting 83 · Action Yes No · Step 5 · Step 6 · Step 7 · Step 8 · Action Yes No · Step 1 · Step 2
Page 84 of the Lexmark CS725 user manual — Blank or white pages
Page 84 · click to enlarge
Page 84

The problem is solved.

Go to step 4.

a Check if the ports are working and if the cables are securely

connected to the computer and the printer.

For more information, see the setup documentation that came with the printer. b Resend the print job.

Is the document printed?

The problem is solved.

Go to step 5.

a Turn off the printer, wait for about 10 seconds, and then turn it

back on. b Resend the print job.

Is the document printed?

The problem is solved.

Contact customer support.

a Remove, and then reinstall the printer software.

Is the document printed?

Print quality is poor

Blank or white pages

Lexmark CS725 — Blank or white pages diagram (page 84)
Fig. 164 · Blank or white pages
Show 5 more labels / short text on this page
Troubleshooting 84 · Action Yes No · Step 3 · Step 4 · Step 5
Page 85 of the Lexmark CS725 user manual — Dark print
Page 85 · click to enlarge
Page 85

Go to step 2. The problem is solved.

a Remove, and then reinstall the imaging unit or imaging kit.

Is the printer still printing blank or white pages?

Contact customer support.

The problem is solved.

a Replace the imaging unit or imaging kit.

Is the printer still printing blank or white pages?

Dark print

Go to step 2. The problem is solved.

a From the Quality menu on the control panel, select Color

Adjust. b Resend the print job.

Is the print still too dark?

Show 6 more labels / short text on this page
Troubleshooting 85 · Action Yes No · Step 1 · Step 2 · Action Yes No · Step 1
Page 86 of the Lexmark CS725 user manual — Dark print
Page 86 · click to enlarge
Page 86

Go to step 3. The problem is solved.

a Depending on your operating system, reduce the toner

darkness from the Printing Preferences or Print dialog.

Is the print still too dark?

Go to step 4. The problem is solved.

a Depending on your operating system, specify the paper type,

texture, and weight from the Printing Preferences or Print dialog.

  • Make sure that the settings match the paper loaded in the tray.
  • You can also change the settings on the printer control panel. b Resend the print job.

Is the print still too dark?

Step 4 Make sure that the paper has no texture or rough finishes.

Change the texture settings to match the paper you are printing on.

Go to step 5.

Are you printing on textured or rough paper?

Go to step 6. The problem is solved.

a Load paper from a fresh package.

Is the print still too dark?

Contact customer support.

The problem is solved.

a Remove, and then reinstall the waste toner bottle. b From the Quality menu on the control panel, select Color

Adjust. c Resend the print job.

Is the print still too dark?

Show 6 more labels / short text on this page
Troubleshooting 86 · Action Yes No · Step 2 · Step 3 · Step 5 · Step 6
Page 87 of the Lexmark CS725 user manual — Gray background
Page 87 · click to enlarge
Page 87

Ghost images

Lexmark CS725 — Ghost images diagram (page 87)
Fig. 165 · Ghost images

a Load the tray with the correct paper type and weight. b Resend the print job.

a Depending on your operating system, specify the paper type

and weight from the Printing Preferences or Print dialog.

  • Make sure that the settings match the paper loaded in the tray.
  • You can also change the settings on the printer control panel. b Resend the print job.

a From the Quality menu on the control panel, select Color

Gray background

ABCDE

ABCDE ABCDE

Troubleshooting 87 · Leading edge · Trailing edge

Page 88 of the Lexmark CS725 user manual — Horizontal dark lines
Page 88 · click to enlarge
Page 88

Go to step 2. The problem is solved.

a From the home screen, touch Settings > Print > Quality. b Adjust the toner darkness.

c Print the document.

Does gray background still appear on prints?

Go to step 3. The problem is solved.

a From the home screen, touch Settings > Print > Quality >

Advanced Imaging > Color Adjust. b Start the process.

c Print the document.

Does gray background still appear on prints?

Contact customer support.

The problem is solved.

a Remove, and then reinstall the imaging unit or imaging kit.

Does gray background still appear on prints?

Horizontal dark lines

ABCDE ABCDE ABCDE

Go to step 2. The problem is solved.

a Depending on your operating system, specify the tray or feeder

from the Printing Preferences or Print dialog. b Resend the print job.

Do horizontal dark lines still appear on prints?

Show 7 more labels / short text on this page
Troubleshooting 88 · Action Yes No · Step 1 · Step 2 · Step 3 · Action Yes No · Step 1
Page 89 of the Lexmark CS725 user manual — Horizontal white lines
Page 89 · click to enlarge
Page 89

Go to step 3. The problem is solved.

a Depending on your operating system, specify the paper type

and weight from the Printing Preferences or from Print dialog.

  • Make sure that the settings match the paper loaded in the tray.
  • You can also change the settings on the printer control panel. b Resend the print job.

Do horizontal dark lines still appear on prints?

Go to step 4. The problem is solved.

a Load paper from a fresh package.

Do horizontal dark lines still appear on prints?

Contact customer support.

The problem is solved.

a Remove, and then reinstall the imaging unit or imaging kit.

Do horizontal dark lines still appear on prints?

Horizontal white lines

Show 7 more labels / short text on this page
Troubleshooting 89 · Action Yes No · Step 2 · Step 3 · Step 4 · Leading edge · Trailing edge
Page 90 of the Lexmark CS725 user manual — Incorrect margins
Page 90 · click to enlarge
Page 90

Go to step 2. The problem is solved.

a Depending on your operating system, specify the paper type

and weight from the Printing Preferences or Print dialog.

  • Make sure that the settings match the paper loaded in the tray.
  • You can also change the settings on the printer control panel. b Resend the print job.

Do horizontal white lines still appear on prints?

Go to step 3. The problem is solved.

a Load the specified tray or feeder with the recommended paper

type. b Resend the print job.

Do horizontal white lines still appear on prints?

Contact customer support.

The problem is solved.

a Remove, and then reinstall the imaging unit or imaging kit.

Do horizontal white lines still appear on prints?

Incorrect margins

ABCD ABCD ABCD

Show 5 more labels / short text on this page
Troubleshooting 90 · Action Yes No · Step 1 · Step 2 · Step 3
Page 91 of the Lexmark CS725 user manual — Jagged or uneven characters
Page 91 · click to enlarge
Page 91

The problem is solved.

Go to step 2.

a Squeeze and slide the paper guides to the correct position for

the size of the paper you are loading. b Resend the print job.

Are the margins correct?

The problem is solved.

Go to step 3.

a From the Paper menu on the control panel, check if the printer

is detecting the correct paper size. b Resend the print job.

Are the margins correct?

The problem is solved.

Contact customer support.

a Depending on your operating system, specify the paper size

from the Printing Preferences or Print dialog.

  • Make sure that the settings match the paper loaded in the tray.
  • You can also change the settings on the printer control panel. b Resend the print job.

Are the margins correct?

Jagged or uneven characters

Show 5 more labels / short text on this page
Troubleshooting 91 · Action Yes No · Step 1 · Step 2 · Step 3
Page 92 of the Lexmark CS725 user manual — Light print
Page 92 · click to enlarge
Page 92

a Check if the printer supports the fonts that are installed on your

Contact customer support.

The problem is solved.

computer.

1 From the control panel, touch: Settings > Reports > Print > Print Fonts 2 Select PCL Fonts or PS Fonts. b If the font is not supported, then install a supported font. For

more information, contact your administrator. c Resend the print job.

Do prints still contain jagged or uneven characters?

Light print

Go to step 2. The problem is solved.

a From the Quality menu on the control panel, select Color

Adjust. b Resend the print job.

Is the print still too light?

Go to step 3. The problem is solved.

a Depending on your operating system, increase the toner

darkness from the Printing Preferences or Print dialog.

Is the print still too light?

Show 5 more labels / short text on this page
Troubleshooting 92 · Action Yes No · Action Yes No · Step 1 · Step 2
Page 93 of the Lexmark CS725 user manual — Mottled print and dots
Page 93 · click to enlarge
Page 93

Go to step 4. The problem is solved.

a Depending on your operating system, specify the paper type,

texture, and weight from the Printing Preferences or Print dialog.

  • Make sure that the settings match the paper loaded in the tray.
  • You can also change the settings on the printer control panel. b Resend the print job.

Is the print still too light?

Change the texture settings to match the paper you are printing on.

Go to step 5.

Make sure that the paper has no texture or rough finishes.

Are you printing on textured or rough paper?

Go to step 6. The problem is solved.

a Load paper from a fresh package.

Is the print still too light?

Go to step 7. The problem is solved.

a Remove, and then reinstall the waste toner bottle. b From the Quality menu on the control panel, select Color

Adjust.

Is the print still too light?

Contact customer support.

The problem is solved.

Remove, and then reinstall the imaging kit.

Is the print still too light?

Mottled print and dots

ABC DEF

Show 7 more labels / short text on this page
Troubleshooting 93 · Action Yes No · Step 3 · Step 4 · Step 5 · Step 6 · Step 7
Page 94 of the Lexmark CS725 user manual — Print crooked or skewed
Page 94 · click to enlarge
Page 94

Step 1 Check the printer for leaked toner contamination.

Go to step 2. Contact customer support.

Is the printer free of leaked toner?

Go to step 4. Go to step 3.

a From the home screen, touch Settings > Device > Preferences. b Check if the paper type and size settings match the paper type

and size set in the tray.

Do the settings match?

Go to step 4. The problem is solved.

a Change the paper size and type in the Paper menu or adjust

the size settings in the tray. b Print the document.

Is the print still mottled?

Go to step 5. The problem is solved.

a Replace the textured or rough paper loaded in the tray with

plain paper. b Print the document.

Is the print still mottled?

Contact customer support.

The problem is solved.

a Replace the imaging unit or imaging kit.

Is the print still mottled?

Print crooked or skewed

) ) ABCDE

ABCDE ABCDE

Show 6 more labels / short text on this page
Troubleshooting 94 · Action Yes No · Step 2 · Step 3 · Step 4 · Step 5
Page 95 of the Lexmark CS725 user manual — Repeating defects
Page 95 · click to enlarge
Page 95

Go to step 2. The problem is solved.

a Remove the tray. b Remove the paper, and then load paper from a fresh package.

the size of the paper you are loading. d Insert the tray. e Resend the print job.

Is the print still crooked or skewed?

Contact customer support.

The problem is solved.

a Check if you are printing on a supported paper. b Resend the print job.

Is the print still crooked or skewed?

Repeating defects

Go to step 2. Go to step 3.

a Print the quality sample pages.

From the home screen, touch Settings > Troubleshooting > Basic Print Quality Samples. b Determine how many colors have defects.

Is only one color affected?

Show 9 more labels / short text on this page
Troubleshooting 95 · Action Yes No · Step 1 · Step 2 · ) · ) · ) · Action Yes No · Step 1
Page 96 of the Lexmark CS725 user manual — Solid color or black images
Page 96 · click to enlarge
Page 96

Take note of the distance, and then contact customer support or your service representative.

The problem is solved.

a Using the Maintenance Defect Ruler, measure the distance

between the repeating defects on the affected color page. b Replace the supply item that matches the measurement on the

affected color page.

Imaging kit or imaging unit

  • 94.20 mm (3.70 in.)
  • 29.80 mm (1.17 in.)
  • 25.10 mm (0.99 in.)
  • 43.90 mm (1.73 in.)
  • 45.50 mm (1.79 in.) c Print the quality sample pages.

Do the defects still appear?

Take note of the distance, and then contact customer support or your service representative.

The problem is solved.

a Using the Maintenance Defect Ruler, measure the distance

between the defects on the affected color page. b Replace the supply item that matches the measurement on the

affected color page.

  • 37.70 mm (1.48 in.)
  • 78.50 mm (3.09 in.)
  • 55 mm (2.17 in.)
  • 95 mm (3.74 in.)
  • 110 mm (4.33 in.)
  • 34.60 mm (1.36 in.) c Print the quality sample pages.

Do the defects still appear?

Solid color or black images

Lexmark CS725 — Solid color or black images diagram (page 96)
Fig. 166 · Solid color or black images
Show 7 more labels / short text on this page
Troubleshooting 96 · Action Yes No · Step 2 · Developer unit · Step 3 · Transfer module · Fuser
Page 97 of the Lexmark CS725 user manual — Text or images cut off
Page 97 · click to enlarge
Page 97
Lexmark CS725 — Text or images cut off diagram (page 97)
Fig. 167 · Text or images cut off

a Remove, and then reinstall the imaging unit or imaging kit.

Is the printer still printing solid color or black images?

Text or images cut off

Lexmark CS725 — Text or images cut off diagram (page 97)
Fig. 168 · Text or images cut off

a Move the paper guides in the tray to the correct position for the

a Depending on your operating system, specify the paper size

  • Make sure that the settings match the paper loaded in the tray.
  • You can also change the settings on the printer control panel. b Resend the print job.

Troubleshooting 97

Page 98 of the Lexmark CS725 user manual — Uneven print density
Page 98 · click to enlarge
Page 98
Lexmark CS725 — Toner easily rubs off diagram (page 98)
Fig. 169 · Toner easily rubs off

a Remove, and then reinstall the imaging unit or imaging kit.

Toner easily rubs off

Lexmark CS725 — Toner easily rubs off diagram (page 98)
Fig. 170 · Toner easily rubs off

1 Depending on your operating system, specify the paper type, texture, and weight from the Printing Preferences or Print dialog.

  • Make sure that the settings match the paper loaded in the tray.
  • You can also change the settings on the printer control panel. 2 Resend the print job.

Uneven print density

Troubleshooting 98

Page 99 of the Lexmark CS725 user manual — Vertical white lines
Page 99 · click to enlarge
Page 99
Lexmark CS725 — Vertical dark lines or streaks diagram (page 99)
Fig. 171 · Vertical dark lines or streaks

Replace the imaging unit or imaging kit, and then resend the print job.

Vertical dark lines or streaks

Lexmark CS725 — Vertical dark lines or streaks diagram (page 99)
Fig. 172 · Vertical dark lines or streaks

a Remove, and then reinstall the imaging unit or imaging kit.

Do vertical dark lines or streaks still appear on prints?

Vertical white lines

Troubleshooting 99 · Leading edge · Trailing edge

Page 100 of the Lexmark CS725 user manual — The printer is not responding
Page 100 · click to enlarge
Page 100

a Remove, and then reinstall the imaging unit or imaging kit.

Contact customer support.

The problem is solved.

Do vertical white lines still appear on prints?

The printer is not responding

The problem is solved.

Go to step 2.

Connect the power cord to the electrical outlet.

Is the printer responding?

Turn on the switch or reset the breaker.

Go to step 3.

Check if the electrical outlet is turned off by a switch or breaker.

Is the electrical outlet turned off by a switch or breaker?

Go to step 4. Turn on the printer.

Check if the printer is on.

Is the printer on?

Press the power button to wake the printer.

Go to step 5.

Check if the printer is in sleep or hibernate mode.

Is the printer in sleep or hibernate mode?

Step 5 Check if the cables connecting the printer and the computer are inserted in the correct ports.

Go to step 6. Make sure to match the following:

  • The USB cable with the USB port on the printer
  • The Ethernet cable with the Ethernet port on the printer

Are the cables inserted in the correct ports?

Show 7 more labels / short text on this page
Troubleshooting 100 · Action Yes No · Action Yes No · Step 1 · Step 2 · Step 3 · Step 4
Page 101 of the Lexmark CS725 user manual — Job prints from the wrong tray or on the wrong paper
Page 101 · click to enlarge
Page 101

The problem is solved

Go to step 7.

Turn off the printer, reinstall the hardware options, and then turn it back on.

For more information, see the documentation that came with the option.

Is the printer responding?

The problem is solved

Go to step 8.

Install the correct print driver.

Is the printer responding?

The problem is solved.

Contact customer support.

Turn off the printer, wait for about 10 seconds, and then turn it back on.

Is the printer responding?

Job prints from the wrong tray or on the wrong paper

Go to step 2. Load the correct paper size and paper type.

a Check if you are printing on the correct paper. b Print the document.

Is the document printed on the correct paper?

The problem is solved.

Go to step 3.

a Depending on your operating system, specify the paper size

and paper type from the Printing Preferences or Print dialog.

  • Make sure that the settings match the paper loaded in the tray.
  • You can also change the settings on the printer control panel. b Print the document.

Is the document printed from the correct tray or on the correct paper?

The problem is solved.

Contact customer support.

a Check if the trays are not linked.

For more information, see “Linking trays” on page 25. b Print the document.

Is the document printed from the correct tray?

Show 9 more labels / short text on this page
Troubleshooting 101 · Action Yes No · Step 6 · Step 7 · Step 8 · Action Yes No · Step 1 · Step 2 · Step 3
Page 102 of the Lexmark CS725 user manual — FAQ about color printing
Page 102 · click to enlarge
Page 102

Color quality problems

Adjusting toner darkness

1 From the home screen, touch Settings > Print > Quality.

2 Adjust the toner darkness.

3 Apply the changes.

Modifying the colors in printed output

1 From the home screen, touch Settings > Print > Quality > Advanced Imaging > Color Correction > Manual.

2 From the Advanced Imaging menu, select Color Correction Content.

3 Choose the appropriate color conversion setting.

Object type Color conversion tables

  • Vivid —Produces brighter, more saturated colors and may be applied to all incoming color formats.
  • sRGB Display —Produces an output that approximates the colors displayed on a computer monitor. Black toner usage is optimized for printing photographs.
  • Display ‑ True Black —Produces an output that approximates the colors displayed on a computer monitor. This setting uses only black toner to create all levels of neutral gray.
  • sRGB Vivid —Provides an increased color saturation for the sRGB Display color correction. Black toner usage is optimized for printing business graphics.
  • Off

RGB Text RGB Graphics

  • US CMYK —Applies color correction to approximate the Specifications for Web Offset Publishing (SWOP) color output.
  • Euro CMYK —Applies color correction to approximate Euroscale color output.
  • Vivid CMYK —Increases the color saturation of the US CMYK color correction setting.
  • Off

FAQ about color printing

What is RGB color?

RGB color is a method of describing colors by indicating the amount of red, green, or blue used to produce a certain color. Red, green, and blue light can be added in various amounts to produce a large range of colors observed in nature. Computer screens, scanners, and digital cameras use this method to display colors.

Show 5 more labels / short text on this page
Troubleshooting 102 · RGB Image · CMYK Image · CMYK Text · CMYK Graphics
Page 103 of the Lexmark CS725 user manual — Color quality problems
Page 103 · click to enlarge
Page 103

What is CMYK color?

CMYK color is a method of describing colors by indicating the amount of cyan, magenta, yellow, and black used to reproduce a particular color. Cyan, magenta, yellow, and black inks or toners can be printed in various amounts to produce a large range of colors observed in nature. Printing presses, inkjet printers, and color laser printers create colors in this manner.

How is color specified in a document to be printed?

Software programs are used to specify and modify the document color using RGB or CMYK color combinations. For more information, see the software program Help topics.

How does the printer know what color to print?

When printing a document, information describing the type and color of each object is sent to the printer and is passed through color conversion tables. Color is translated into the appropriate amounts of cyan, magenta, yellow, and black toner used to produce the color you want. The object information determines the application of color conversion tables. For example, it is possible to apply one type of color conversion table to text while applying a different color conversion table to photographic images.

What is manual color correction?

When manual color correction is enabled, the printer employs user‑selected color conversion tables to process objects. Manual color correction settings are specific to the type of object being printed (text, graphics, or images). It is also specific to how the color of the object is specified in the software program (RGB or CMYK combinations). To apply a different color conversion table manually, see “Modifying the colors in printed output” on page 102.

If the software program does not specify colors with RGB or CMYK combinations, then manual color correction is not useful. It is also not effective if the software program or the computer operating system controls the adjustment of colors. In most situations, setting the Color Correction to Auto generates preferred colors for the documents.

How can I match a particular color (such as a corporate logo)?

From the printer Quality menu, nine types of Color Samples sets are available. These sets are also available from the Color Samples page of the Embedded Web Server. Selecting any sample set generates multiple‑page prints consisting of hundreds of colored boxes. Each box contains a CMYK or RGB combination, depending on the table selected. The observed color of each box is obtained by passing the CMYK or RGB combination labeled on the box through the selected color conversion table.

By examining Color Samples sets, you can identify the box with color closest to the color being matched. The color combination labeled on the box can then be used for modifying the color of the object in a software program. For more information, see the software program Help topics. Manual color correction may be necessary to use the selected color conversion table for the particular object.

Selecting which Color Samples set to use for a particular color‑matching problem depends on:

  • The Color Correction setting being used (Auto, Off, or Manual)
  • The type of object being printed (text, graphics, or images)
  • How the color of the object is specified in the software program (RGB or CMYK combinations)

If the software program does not specify colors with RGB or CMYK combinations, then the Color Samples pages are not useful. Additionally, some software programs adjust the RGB or CMYK combinations specified in the program through color management. In these situations, the printed color may not be an exact match of the Color Samples pages.

Troubleshooting 103

Page 104 of the Lexmark CS725 user manual — Contacting customer support
Page 104 · click to enlarge
Page 104

The print appears tinted

Adjust the color balance.

The problem is solved.

Contact customer support.

a From the home screen, touch Settings > Print > Quality >

Advanced Imaging > Color Balance. b Adjust the setting.

c Resend the print job.

Does the print still appear tinted?

Contacting customer support

Before contacting customer support, make sure to have the following information:

  • Printer problem
  • Error message
  • Printer model type and serial number

Go to http://support.lexmark.com to receive e‑mail or chat support, or browse through the library of manuals, support documentation, drivers, and other downloads.

Technical support via telephone is also available. In the U.S. or Canada, call 1-800-539-6275. For other countries or regions, go to http://support.lexmark.com.

Troubleshooting 104 · Action No Yes

Page 105 of the Lexmark CS725 user manual — Installing a memory card
Page 105 · click to enlarge
Page 105

Upgrading and migrating 105

Upgrading and migrating

Hardware

Available internal options

  • Memory card – DDR3 DIMM – Flash memory
  • Fonts – Application cards
  • Forms and Bar Code
  • PRESCRIBE
  • IPDS
  • Lexmark Internal Solutions Port (ISP) – MarkNet TM N8360 (802.11 b/g/n/a wireless print server bundled with LEX ‑ M06 ‑ 001 Mobile Solutions

Module) – IEEE 1284‑B Parallel Card – RS‑232C Serial Card

Installing a memory card

CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock, if you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

1 Turn off the printer, and then unplug the power cord from the electrical outlet.

2 Using a flat‑head screwdriver, remove the controller board access cover.

Page 106 of the Lexmark CS725 user manual — Upgrading and migrating
Page 106 · click to enlarge
Page 106

Upgrading and migrating 106

Lexmark CS725 — Upgrading and migrating diagram (page 106)
Fig. 173 · Upgrading and migrating
Lexmark CS725 — Upgrading and migrating diagram (page 106)
Fig. 174 · Upgrading and migrating
Lexmark CS725 — Upgrading and migrating diagram (page 106)
Fig. 175 · Upgrading and migrating
Lexmark CS725 — Upgrading and migrating diagram (page 106)
Fig. 176 · Upgrading and migrating
Lexmark CS725 — Upgrading and migrating diagram (page 106)
Fig. 177 · Upgrading and migrating

3 Unpack the memory card.

4 Insert the memory card until it clicks into place.

Lexmark CS725 — Upgrading and migrating diagram (page 106)
Fig. 178 · Upgrading and migrating
Lexmark CS725 — Upgrading and migrating diagram (page 106)
Fig. 179 · Upgrading and migrating
Page 107 of the Lexmark CS725 user manual — Installing an internal solutions port
Page 107 · click to enlarge
Page 107

Upgrading and migrating 107

5 Reattach the access cover.

Lexmark CS725 — Installing an internal solutions port diagram (page 107)
Fig. 180 · Installing an internal solutions port
Lexmark CS725 — Installing an internal solutions port diagram (page 107)
Fig. 181 · Installing an internal solutions port
Lexmark CS725 — Installing an internal solutions port diagram (page 107)
Fig. 182 · Installing an internal solutions port
Lexmark CS725 — Installing an internal solutions port diagram (page 107)
Fig. 183 · Installing an internal solutions port

6 Connect the power cord to the electrical outlet, and then turn on the printer.

Installing an internal solutions port

CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock, if you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

1 Turn off the printer, and then unplug the power cord from the electrical outlet.

2 Using a flat‑head screwdriver, remove the controller board access cover.

Page 108 of the Lexmark CS725 user manual — 1 ISP
Page 108 · click to enlarge
Page 108

Upgrading and migrating 108

3 Unpack the internal solutions port (ISP) kit.

Lexmark CS725 — Installing an internal solutions port diagram (page 108)
Fig. 184 · Installing an internal solutions port
Lexmark CS725 — Installing an internal solutions port diagram (page 108)
Fig. 185 · Installing an internal solutions port

1 ISP

2 Mounting bracket · 3 Thumbscrews · 4 Housing

Page 109 of the Lexmark CS725 user manual — Installing an internal solutions port
Page 109 · click to enlarge
Page 109

Upgrading and migrating 109

5 ISP extended cable

4 Install the ISP into its housing.

Lexmark CS725 — Installing an internal solutions port diagram (page 109)
Fig. 186 · Installing an internal solutions port
Lexmark CS725 — Installing an internal solutions port diagram (page 109)
Fig. 187 · Installing an internal solutions port
Lexmark CS725 — Installing an internal solutions port diagram (page 109)
Fig. 188 · Installing an internal solutions port
Lexmark CS725 — Installing an internal solutions port diagram (page 109)
Fig. 189 · Installing an internal solutions port
Page 110 of the Lexmark CS725 user manual — Installing an internal solutions port
Page 110 · click to enlarge
Page 110

Upgrading and migrating 110

5 Attach the housing to the controller board access cover.

Lexmark CS725 — Installing an internal solutions port diagram (page 110)
Fig. 190 · Installing an internal solutions port
Lexmark CS725 — Installing an internal solutions port diagram (page 110)
Fig. 191 · Installing an internal solutions port
Lexmark CS725 — Installing an internal solutions port diagram (page 110)
Fig. 192 · Installing an internal solutions port
Lexmark CS725 — Installing an internal solutions port diagram (page 110)
Fig. 193 · Installing an internal solutions port
Lexmark CS725 — Installing an internal solutions port diagram (page 110)
Fig. 194 · Installing an internal solutions port
Page 111 of the Lexmark CS725 user manual — Installing an internal solutions port
Page 111 · click to enlarge
Page 111

Upgrading and migrating 111

6 Connect the ISP extended cable to the ISP connector in the controller board.

Lexmark CS725 — Installing an internal solutions port diagram (page 111)
Fig. 195 · Installing an internal solutions port

7 Reattach the controller board access cover.

Lexmark CS725 — Installing an internal solutions port diagram (page 111)
Fig. 196 · Installing an internal solutions port

8 Connect the power cord to the electrical outlet, and then turn on the printer.

Page 112 of the Lexmark CS725 user manual — Installing an optional card
Page 112 · click to enlarge
Page 112

Upgrading and migrating 112

Installing an optional card

CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock, if you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

1 Turn off the printer, and then unplug the power cord from the electrical outlet.

2 Using a flat‑head screwdriver, remove the controller board access cover.

3 Unpack the optional card.

Page 113 of the Lexmark CS725 user manual — Installing an optional card
Page 113 · click to enlarge
Page 113

Upgrading and migrating 113

4 Push the card firmly into place.

Lexmark CS725 — Installing an optional card diagram (page 113)
Fig. 197 · Installing an optional card
Lexmark CS725 — Installing an optional card diagram (page 113)
Fig. 198 · Installing an optional card
Lexmark CS725 — Installing an optional card diagram (page 113)
Fig. 199 · Installing an optional card
Lexmark CS725 — Installing an optional card diagram (page 113)
Fig. 200 · Installing an optional card
Page 114 of the Lexmark CS725 user manual — Installing a printer hard disk
Page 114 · click to enlarge
Page 114

Upgrading and migrating 114

5 Reattach the access cover.

6 Connect the power cord to the electrical outlet, and then turn on the printer.

Installing a printer hard disk

CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock, if you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

1 Turn off the printer, and then unplug the power cord from the electrical outlet.

2 Using a flat‑head screwdriver, remove the controller board access cover.

Page 115 of the Lexmark CS725 user manual — Installing a printer hard disk
Page 115 · click to enlarge
Page 115

Upgrading and migrating 115

3 Unpack the hard disk.

4 Attach the hard disk to the controller board.

Lexmark CS725 — Installing a printer hard disk diagram (page 115)
Fig. 201 · Installing a printer hard disk
Lexmark CS725 — Installing a printer hard disk diagram (page 115)
Fig. 202 · Installing a printer hard disk
Lexmark CS725 — Installing a printer hard disk diagram (page 115)
Fig. 203 · Installing a printer hard disk
Lexmark CS725 — Installing a printer hard disk diagram (page 115)
Fig. 204 · Installing a printer hard disk
Lexmark CS725 — Installing a printer hard disk diagram (page 115)
Fig. 205 · Installing a printer hard disk
Page 116 of the Lexmark CS725 user manual — Installing a printer hard disk
Page 116 · click to enlarge
Page 116

Upgrading and migrating 116

5 Open door B.

6 Open door C.

Lexmark CS725 — Installing a printer hard disk diagram (page 116)
Fig. 206 · Installing a printer hard disk
Lexmark CS725 — Installing a printer hard disk diagram (page 116)
Fig. 207 · Installing a printer hard disk
Lexmark CS725 — Installing a printer hard disk diagram (page 116)
Fig. 208 · Installing a printer hard disk
Page 117 of the Lexmark CS725 user manual — Installing a printer hard disk
Page 117 · click to enlarge
Page 117

Upgrading and migrating 117

7 Secure the hard disk to the printer using the thumbscrews.

Lexmark CS725 — Installing a printer hard disk diagram (page 117)
Fig. 209 · Installing a printer hard disk
Lexmark CS725 — Installing a printer hard disk diagram (page 117)
Fig. 210 · Installing a printer hard disk

8 Close doors C and B.

9 Reattach the controller board access cover.

Lexmark CS725 — Installing a printer hard disk diagram (page 117)
Fig. 211 · Installing a printer hard disk

10 Connect the power cord to the electrical outlet, and then turn on the printer.

Page 118 of the Lexmark CS725 user manual — Installing optional trays
Page 118 · click to enlarge
Page 118

Upgrading and migrating 118

Installing optional trays

CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock, if you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

1 Turn off the printer.

2 Unplug the power cord from the electrical outlet, and then from the printer.

3 Unpack the optional tray, and then remove all packing material.

4 Align the printer with the optional tray, and then lower the printer until it clicks into place.

Lexmark CS725 — Installing optional trays diagram (page 118)
Fig. 212 · Installing optional trays
Lexmark CS725 — Installing optional trays diagram (page 118)
Fig. 213 · Installing optional trays
Lexmark CS725 — Installing optional trays diagram (page 118)
Fig. 214 · Installing optional trays

5 Connect the power cord to the printer, and then to the electrical outlet.

6 Turn on the printer.

Add the tray in the print driver to make it available for print jobs. For more information, see “Adding available options in the print driver” on page 119.

Page 119 of the Lexmark CS725 user manual — Exporting or importing a configuration file
Page 119 · click to enlarge
Page 119

Upgrading and migrating 119

Software

Installing the printer software

  • 1 Obtain a copy of the software installer package.
  • From the software CD that came with your printer.
  • Go to <a href="http://support.lexmark.com" rel="nofollow noopener" target="_blank">http://support.lexmark.com</a> , and then select your printer and operating system.

2 Run the installer, and then follow the instructions on the computer screen.

3 For Macintosh users, add the printer.

Adding available options in the print driver

For Windows users

1 Open the printers folder.

  • 2 Select the printer you want to update, and then do either of the following:
  • For Windows 7 or later, select Printer properties .
  • For earlier versions, select Properties .

3 Navigate to the Configuration tab, and then select Update Now ‑ Ask Printer.

4 Apply the changes.

For Macintosh users

1 From System Preferences in the Apple menu, navigate to your printer, and then select Options & Supplies.

2 Navigate to the list of hardware options, and then add any installed options.

3 Apply the changes.

Firmware

Exporting or importing a configuration file

You can export the configuration settings of your printer into a text file, and then import the file to apply the settings to other printers.

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Export or import a configuration file for one or multiple applications.

Page 120 of the Lexmark CS725 user manual — Updating firmware
Page 120 · click to enlarge
Page 120

Upgrading and migrating 120

For one application

a From the Embedded Web Server, click Apps > the application that you want > Configure. b Click Export or Import.

For multiple applications

a From the Embedded Web Server, click Export Configuration or Import Configuration. b Follow the instructions on the screen.

Updating firmware

Some applications require a minimum device firmware level to operate correctly.

For more information on updating the device firmware, contact your Lexmark representative.

1 From the Embedded Web Server, click Settings > Device > Update Firmware.

2 Browse to locate the required flash file.

3 Apply the changes.

Page 121 of the Lexmark CS725 user manual — GOVERNMENT END USERS
Page 121 · click to enlarge
Page 121

Notices

Product information

Product name:

Lexmark CS720de, CS720dte, CS725de, CS725dte, CS727de, CS728de

Machine type:

Model(s):

Edition notice

The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you.

This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in later editions. Improvements or changes in the products or the programs described may be made at any time.

References in this publication to products, programs, or services do not imply that the manufacturer intends to make these available in all countries in which it operates. Any reference to a product, program, or service is not intended to state or imply that only that product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any existing intellectual property right may be used instead. Evaluation and verification of operation in conjunction with other products, programs, or services, except those expressly designated by the manufacturer, are the user’s responsibility.

For Lexmark technical support, visit http://support.lexmark.com.

For information on supplies and downloads, visit www.lexmark.com.

© 2017 Lexmark International, Inc.

All rights reserved.

GOVERNMENT END USERS

The Software Program and any related documentation are "Commercial Items," as that term is defined in 48 C.F.R. 2.101, "Computer Software" and "Commercial Computer Software Documentation," as such terms are used in 48 C.F.R. 12.212 or 48 C.F.R. 227.7202, as applicable. Consistent with 48 C.F.R. 12.212 or 48 C.F.R. 227.7202-1 through 227.7207-4, as applicable, the Commercial Computer Software and Commercial Software Documentation are licensed to the U.S. Government end users (a) only as Commercial Items and (b) with only those rights as are granted to all other end users pursuant to the terms and conditions herein.

5028, 7528 · 135, 630, 576 · June 2017

Page 122 of the Lexmark CS725 user manual — Noise emission levels
Page 122 · click to enlarge
Page 122

Licensing notices

All licensing notices associated with this product can be viewed from the CD:\NOTICES directory of the installation software CD.

Trademarks

Lexmark, the Lexmark logo, and MarkNet are trademarks or registered trademarks of Lexmark International, Inc. in the United States and/or other countries.

Google Cloud Print and Google Chrome are trademarks of Google Inc.

Macintosh, the Mac logo, and Safari are trademarks of Apple Inc.

Microsoft, Windows, and Internet Explorer are either registered trademarks or trademarks of the Microsoft group of companies in the United States and other countries.

Mopria®, the Mopria® logo, and the Mopria® Alliance logo are registered trademarks and service marks of Mopria Alliance, Inc. in the United States and other countries. Unauthorized use is strictly prohibited.

PCL® is a registered trademark of the Hewlett-Packard Company. PCL is Hewlett-Packard Company’s designation of a set of printer commands (language) and functions included in its printer products. This printer is intended to be compatible with the PCL language. This means the printer recognizes PCL commands used in various application programs, and that the printer emulates the functions corresponding to the commands.

PostScript is a registered trademark of Adobe Systems Incorporated in the United States and/or other countries.

All other trademarks are the property of their respective owners.

AirPrint and the AirPrint logo are trademarks of Apple, Inc.

Noise emission levels

The following measurements were made in accordance with ISO 7779 and reported in conformance with ISO 9296.

1-meter average sound pressure, dBA

Printing One-sided: 51 (CS720, CS727); 53 (CS725, CS728) Two‑sided: 53 (CS720, CS727); 55 (CS725, CS728)

Values are subject to change. See www.lexmark.com for current values.

Ready 15

Page 123 of the Lexmark CS725 user manual — Laser advisory label
Page 123 · click to enlarge
Page 123

Static sensitivity notice

This symbol identifies static-sensitive parts. Do not touch the areas near these symbols without first touching a metal surface in an area away from the symbol.

Temperature information

Operating temperature and relative humidity 10 to 32.2°C (50 to 90°F) and 15 to 80% RH 15.3 to 32.2°C (60 to 90°F) and 8 to 15% RH Maximum wet bulb temperature: 22.8°C (73°F)

Shipping temperature -40 to 43.3°C (-40 to 110°F)

Storage temperature and relative humidity 1 to 35°C (34 to 95°F)

8 to 80% RH

Laser notice

The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR, Chapter I, Subchapter J for Class I (1) laser products, and elsewhere is certified as a Class I laser product conforming to the requirements of IEC 60825-1: 2014.

Class I laser products are not considered to be hazardous. The printer contains internally a Class IIIb (3b) AlGaInP laser that is nominally 15 milliwatts operating in the wavelength region of 650–670 nanometers and enclosed in a non-serviceable printhead assembly. The laser system and printer are designed so there is never any human access to laser radiation above a Class I level during normal operation, user maintenance, or prescribed service conditions.

Laser advisory label

A laser notice label may be affixed to this printer as shown:

Page 124 of the Lexmark CS725 user manual — Static sensitivity notice
Page 124 · click to enlarge
Page 124

NEBEZPEČÍ - Když jsou vyjmuty kazety a je odblokována pojistka, ze zařízení je vysíláno neviditelné laserové záření. Nevystavujte se působení laserového paprsku. FARE - Usynlig laserstråling, når patroner fjernes, og spærreanordningen er slået fra. Undgå at blive udsat for laserstrålen.

VAARA - Näkymätöntä lasersäteilyä on varottava, kun värikasetit on poistettu ja lukitus on auki. Vältä lasersäteelle altistumista.

VESZÉLY – Nem látható lézersugárzás fordulhat elő a patronok eltávolításakor és a zárószerkezet felbontásakor. Kerülje a lézersugárnak való kitettséget. PERICOLO - Emissione di radiazioni laser invisibili durante la rimozione delle cartucce e del blocco. Evitare l´esposizione al raggio laser.

FARE – Usynlig laserstråling når kassettene tas ut og sperren er satt ut av spill. Unngå eksponering for laserstrålen. NIEBEZPIECZEŃSTWO - niewidzialne promieniowanie laserowe podczas usuwania kaset i blokady. Należy unikać naświetlenia promieniem lasera.

ОПАСНО! Невидимое лазерное излучение при извлеченных картриджах и снятии блокировки. Избегайте воздействия лазерных лучей. Pozor – Nebezpečenstvo neviditeľného laserového žiarenia pri odobratých kazetách a odblokovanej poistke. Nevystavujte sa lúčom.

FARA – Osynlig laserstrålning när patroner tas ur och spärrmekanismen är upphävd. Undvik exponering för laserstrålen. 危险 - 当移除碳粉盒及互锁失效时会产生看不见的激光辐射,请避免暴露在激光光束下。

危險 - 移除碳粉匣與安全連續開關失效時會產生看不見的雷射輻射。請避免曝露在雷射光束下。 危険 - カートリッジが取り外され、内部ロックが無効になると、見えないレーザー光が放射されます。 このレーザー光に当たらないようにしてください。

Page 126 of the Lexmark CS725 user manual — Table of contents
Page 126 · click to enlarge
Page 126

Table of contents

Contentsp.2Safety informationp.5Conventionsp.5Product statementsp.5Learning about the printerp.8Finding information about the printerp.8Selecting a location for the printerp.9Printer configurationsp.10Attaching cablesp.11Using the control panelp.12Understanding the status of the power button and indicator lightp.13Using the home screenp.13Menu mapp.15Printing a menu settings pagep.16Setting up and using the home screen applicationsp.17Customizing the home screenp.17Using Display Customizationp.17Setting up Forms and Favoritesp.17Configuring Eco-Settingsp.18Managing contactsp.18Adding contactsp.18Adding groupsp.18Editing contacts or groupsp.19Deleting contacts or groupsp.19Setting up and using the accessibility featuresp.20Enabling Magnification modep.20Activating Voice Guidancep.20Adjusting the Voice Guidance speech ratep.20Enabling spoken passwords or personal identification numbersp.20Navigating the screen using gesturesp.21Using the keyboard on the displayp.21Loading paper and specialty mediap.22Setting the size and type of the specialty mediap.22Configuring Universal paper settingsp.22Loading traysp.22Loading the multipurpose feederp.24Linking traysp.25Printingp.27Printing from a computerp.27Printing formsp.27Printing from a mobile devicep.27Printing from a mobile device using Lexmark Mobile Printp.27Printing from a mobile device using Google Cloud Printp.27Printing from a mobile device using Mopria Print Servicep.28Printing from a mobile device using AirPrintp.28Printing from a flash drivep.28Supported flash drives and file typesp.29Configuring confidential jobsp.30Printing held jobsp.30Printing a font sample listp.31Canceling a print jobp.31Securing the printerp.32Erasing printer memoryp.32Erasing printer hard disk memoryp.32Configuring printer hard disk encryptionp.32Restoring factory default settingsp.32Statement of Volatilityp.33Maintaining the printerp.34Adjusting the speaker volumep.34Adjusting the default internal speaker volumep.34Adjusting the default headphones volumep.34Networkingp.34Connecting the printer to a wireless network using Wi-Fi Protected Setup (WPS)p.34Changing port settings after installing an internal solutions portp.35Setting up serial printing (Windows only)p.35Cleaning the printerp.36Ordering suppliesp.37Checking the status of parts and suppliesp.37Using genuine Lexmark parts and suppliesp.37Ordering toner cartridgesp.37Ordering imaging unit or imaging kitp.39Ordering a waste toner bottlep.39Ordering a fuser maintenance kitp.39Ordering a transfer modulep.40Replacing parts and suppliesp.40Replacing the imaging unitp.40Replacing the imaging kitp.44Replacing a toner cartridgep.48Replacing the waste toner bottlep.50Replacing the fuserp.51Replacing the pick rollerp.52Replacing the separator padp.55Replacing the transfer modulep.57Resetting the maintenance counterp.61Moving the printerp.61Moving the printer to another locationp.61Shipping the printerp.61Saving energy and paperp.62Setting up power saver modesp.62Adjusting the brightness of the printer displayp.62Conserving suppliesp.62Recyclingp.62Recycling Lexmark productsp.62Recycling Lexmark packagingp.63Returning Lexmark cartridges for reuse or recyclingp.63Clearing jamsp.64Avoiding jamsp.64Identifying jam locationsp.65Paper jam in traysp.66Paper jam in the multipurpose feederp.67Paper jam in the standard binp.67Paper jam in door Ap.68Troubleshootingp.72Network connection problemsp.72Cannot open Embedded Web Serverp.72Unable to read flash drivep.73Enabling the USB portp.73Checking the printer connectivityp.73Hardware options problemsp.74Cannot detect internal optionp.74Internal solutions port does not operate correctlyp.75Parallel or serial interface card does not operate correctlyp.75Defective flash detectedp.76Not enough free space in flash memory for resourcesp.76Unformatted flash detectedp.76Issues with suppliesp.76Replace cartridge, printer region mismatchp.76Non-Lexmark supplyp.77Paper feed problemsp.77Envelope seals when printingp.77Collated printing does not workp.78Paper curlp.78Tray linking does not workp.79Check tray connectionp.79Paper frequently jamsp.80Jammed pages are not reprintedp.81Printing problemsp.81Confidential and other held documents do not printp.81Slow printingp.82Print jobs do not printp.83Print quality is poorp.84Blank or white pagesp.84Dark printp.85Ghost imagesp.87Gray backgroundp.87Horizontal dark linesp.88Horizontal white linesp.89Incorrect marginsp.90Jagged or uneven charactersp.91Light printp.92Mottled print and dotsp.93Print crooked or skewedp.94Repeating defectsp.95Solid color or black imagesp.96Text or images cut offp.97Toner easily rubs offp.98Uneven print densityp.98Vertical dark lines or streaksp.99Vertical white linesp.99The printer is not respondingp.100Job prints from the wrong tray or on the wrong paperp.101Color quality problemsp.102Adjusting toner darknessp.102Modifying the colors in printed outputp.102FAQ about color printingp.102The print appears tintedp.104Contacting customer supportp.104Upgrading and migratingp.105Hardwarep.105Available internal optionsp.105Installing a memory cardp.105Installing an internal solutions portp.107Installing an optional cardp.112Installing a printer hard diskp.114Installing optional traysp.118Softwarep.119Installing the printer softwarep.119Adding available options in the print driverp.119Firmwarep.119Exporting or importing a configuration filep.119Updating firmwarep.120Noticesp.121Product informationp.121Edition noticep.121GOVERNMENT END USERSp.121Licensing noticesp.122Trademarksp.122Noise emission levelsp.122Static sensitivity noticep.123Temperature informationp.123Laser noticep.123Laser advisory labelp.123Indexp.125
Page 127 of the Lexmark CS725 user manual — Table of contents
Page 127 · click to enlarge
Page 127

Table of contents

Contentsp.2Safety informationp.5Conventionsp.5Product statementsp.5Learning about the printerp.8Finding information about the printerp.8Selecting a location for the printerp.9Printer configurationsp.10Attaching cablesp.11Using the control panelp.12Understanding the status of the power button and indicator lightp.13Using the home screenp.13Menu mapp.15Printing a menu settings pagep.16Setting up and using the home screen applicationsp.17Customizing the home screenp.17Using Display Customizationp.17Setting up Forms and Favoritesp.17Configuring Eco-Settingsp.18Managing contactsp.18Adding contactsp.18Adding groupsp.18Editing contacts or groupsp.19Deleting contacts or groupsp.19Setting up and using the accessibility featuresp.20Enabling Magnification modep.20Activating Voice Guidancep.20Adjusting the Voice Guidance speech ratep.20Enabling spoken passwords or personal identification numbersp.20Navigating the screen using gesturesp.21Using the keyboard on the displayp.21Loading paper and specialty mediap.22Setting the size and type of the specialty mediap.22Configuring Universal paper settingsp.22Loading traysp.22Loading the multipurpose feederp.24Linking traysp.25Printingp.27Printing from a computerp.27Printing formsp.27Printing from a mobile devicep.27Printing from a mobile device using Lexmark Mobile Printp.27Printing from a mobile device using Google Cloud Printp.27Printing from a mobile device using Mopria Print Servicep.28Printing from a mobile device using AirPrintp.28Printing from a flash drivep.28Supported flash drives and file typesp.29Configuring confidential jobsp.30Printing held jobsp.30Printing a font sample listp.31Canceling a print jobp.31Securing the printerp.32Erasing printer memoryp.32Erasing printer hard disk memoryp.32Configuring printer hard disk encryptionp.32Restoring factory default settingsp.32Statement of Volatilityp.33Maintaining the printerp.34Adjusting the speaker volumep.34Adjusting the default internal speaker volumep.34Adjusting the default headphones volumep.34Networkingp.34Connecting the printer to a wireless network using Wi-Fi Protected Setup (WPS)p.34Changing port settings after installing an internal solutions portp.35Setting up serial printing (Windows only)p.35Cleaning the printerp.36Ordering suppliesp.37Checking the status of parts and suppliesp.37Using genuine Lexmark parts and suppliesp.37Ordering toner cartridgesp.37Ordering imaging unit or imaging kitp.39Ordering a waste toner bottlep.39Ordering a fuser maintenance kitp.39Ordering a transfer modulep.40Replacing parts and suppliesp.40Replacing the imaging unitp.40Replacing the imaging kitp.44Replacing a toner cartridgep.48Replacing the waste toner bottlep.50Replacing the fuserp.51Replacing the pick rollerp.52Replacing the separator padp.55Replacing the transfer modulep.57Resetting the maintenance counterp.61Moving the printerp.61Moving the printer to another locationp.61Shipping the printerp.61Saving energy and paperp.62Setting up power saver modesp.62Adjusting the brightness of the printer displayp.62Conserving suppliesp.62Recyclingp.62Recycling Lexmark productsp.62Recycling Lexmark packagingp.63Returning Lexmark cartridges for reuse or recyclingp.63Clearing jamsp.64Avoiding jamsp.64Identifying jam locationsp.65Paper jam in traysp.66Paper jam in the multipurpose feederp.67Paper jam in the standard binp.67Paper jam in door Ap.68Troubleshootingp.72Network connection problemsp.72Cannot open Embedded Web Serverp.72Unable to read flash drivep.73Enabling the USB portp.73Checking the printer connectivityp.73Hardware options problemsp.74Cannot detect internal optionp.74Internal solutions port does not operate correctlyp.75Parallel or serial interface card does not operate correctlyp.75Defective flash detectedp.76Not enough free space in flash memory for resourcesp.76Unformatted flash detectedp.76Issues with suppliesp.76Replace cartridge, printer region mismatchp.76Non-Lexmark supplyp.77Paper feed problemsp.77Envelope seals when printingp.77Collated printing does not workp.78Paper curlp.78Tray linking does not workp.79Check tray connectionp.79Paper frequently jamsp.80Jammed pages are not reprintedp.81Printing problemsp.81Confidential and other held documents do not printp.81Slow printingp.82Print jobs do not printp.83Print quality is poorp.84Blank or white pagesp.84Dark printp.85Ghost imagesp.87Gray backgroundp.87Horizontal dark linesp.88Horizontal white linesp.89Incorrect marginsp.90Jagged or uneven charactersp.91Light printp.92Mottled print and dotsp.93Print crooked or skewedp.94Repeating defectsp.95Solid color or black imagesp.96Text or images cut offp.97Toner easily rubs offp.98Uneven print densityp.98Vertical dark lines or streaksp.99Vertical white linesp.99The printer is not respondingp.100Job prints from the wrong tray or on the wrong paperp.101Color quality problemsp.102Adjusting toner darknessp.102Modifying the colors in printed outputp.102FAQ about color printingp.102The print appears tintedp.104Contacting customer supportp.104Upgrading and migratingp.105Hardwarep.105Available internal optionsp.105Installing a memory cardp.105Installing an internal solutions portp.107Installing an optional cardp.112Installing a printer hard diskp.114Installing optional traysp.118Softwarep.119Installing the printer softwarep.119Adding available options in the print driverp.119Firmwarep.119Exporting or importing a configuration filep.119Updating firmwarep.120Noticesp.121Product informationp.121Edition noticep.121GOVERNMENT END USERSp.121Licensing noticesp.122Trademarksp.122Noise emission levelsp.122Static sensitivity noticep.123Temperature informationp.123Laser noticep.123Laser advisory labelp.123Indexp.125
Page 128 of the Lexmark CS725 user manual — Table of contents
Page 128 · click to enlarge
Page 128

Table of contents

Contentsp.2Safety informationp.5Conventionsp.5Product statementsp.5Learning about the printerp.8Finding information about the printerp.8Selecting a location for the printerp.9Printer configurationsp.10Attaching cablesp.11Using the control panelp.12Understanding the status of the power button and indicator lightp.13Using the home screenp.13Menu mapp.15Printing a menu settings pagep.16Setting up and using the home screen applicationsp.17Customizing the home screenp.17Using Display Customizationp.17Setting up Forms and Favoritesp.17Configuring Eco-Settingsp.18Managing contactsp.18Adding contactsp.18Adding groupsp.18Editing contacts or groupsp.19Deleting contacts or groupsp.19Setting up and using the accessibility featuresp.20Enabling Magnification modep.20Activating Voice Guidancep.20Adjusting the Voice Guidance speech ratep.20Enabling spoken passwords or personal identification numbersp.20Navigating the screen using gesturesp.21Using the keyboard on the displayp.21Loading paper and specialty mediap.22Setting the size and type of the specialty mediap.22Configuring Universal paper settingsp.22Loading traysp.22Loading the multipurpose feederp.24Linking traysp.25Printingp.27Printing from a computerp.27Printing formsp.27Printing from a mobile devicep.27Printing from a mobile device using Lexmark Mobile Printp.27Printing from a mobile device using Google Cloud Printp.27Printing from a mobile device using Mopria Print Servicep.28Printing from a mobile device using AirPrintp.28Printing from a flash drivep.28Supported flash drives and file typesp.29Configuring confidential jobsp.30Printing held jobsp.30Printing a font sample listp.31Canceling a print jobp.31Securing the printerp.32Erasing printer memoryp.32Erasing printer hard disk memoryp.32Configuring printer hard disk encryptionp.32Restoring factory default settingsp.32Statement of Volatilityp.33Maintaining the printerp.34Adjusting the speaker volumep.34Adjusting the default internal speaker volumep.34Adjusting the default headphones volumep.34Networkingp.34Connecting the printer to a wireless network using Wi-Fi Protected Setup (WPS)p.34Changing port settings after installing an internal solutions portp.35Setting up serial printing (Windows only)p.35Cleaning the printerp.36Ordering suppliesp.37Checking the status of parts and suppliesp.37Using genuine Lexmark parts and suppliesp.37Ordering toner cartridgesp.37Ordering imaging unit or imaging kitp.39Ordering a waste toner bottlep.39Ordering a fuser maintenance kitp.39Ordering a transfer modulep.40Replacing parts and suppliesp.40Replacing the imaging unitp.40Replacing the imaging kitp.44Replacing a toner cartridgep.48Replacing the waste toner bottlep.50Replacing the fuserp.51Replacing the pick rollerp.52Replacing the separator padp.55Replacing the transfer modulep.57Resetting the maintenance counterp.61Moving the printerp.61Moving the printer to another locationp.61Shipping the printerp.61Saving energy and paperp.62Setting up power saver modesp.62Adjusting the brightness of the printer displayp.62Conserving suppliesp.62Recyclingp.62Recycling Lexmark productsp.62Recycling Lexmark packagingp.63Returning Lexmark cartridges for reuse or recyclingp.63Clearing jamsp.64Avoiding jamsp.64Identifying jam locationsp.65Paper jam in traysp.66Paper jam in the multipurpose feederp.67Paper jam in the standard binp.67Paper jam in door Ap.68Troubleshootingp.72Network connection problemsp.72Cannot open Embedded Web Serverp.72Unable to read flash drivep.73Enabling the USB portp.73Checking the printer connectivityp.73Hardware options problemsp.74Cannot detect internal optionp.74Internal solutions port does not operate correctlyp.75Parallel or serial interface card does not operate correctlyp.75Defective flash detectedp.76Not enough free space in flash memory for resourcesp.76Unformatted flash detectedp.76Issues with suppliesp.76Replace cartridge, printer region mismatchp.76Non-Lexmark supplyp.77Paper feed problemsp.77Envelope seals when printingp.77Collated printing does not workp.78Paper curlp.78Tray linking does not workp.79Check tray connectionp.79Paper frequently jamsp.80Jammed pages are not reprintedp.81Printing problemsp.81Confidential and other held documents do not printp.81Slow printingp.82Print jobs do not printp.83Print quality is poorp.84Blank or white pagesp.84Dark printp.85Ghost imagesp.87Gray backgroundp.87Horizontal dark linesp.88Horizontal white linesp.89Incorrect marginsp.90Jagged or uneven charactersp.91Light printp.92Mottled print and dotsp.93Print crooked or skewedp.94Repeating defectsp.95Solid color or black imagesp.96Text or images cut offp.97Toner easily rubs offp.98Uneven print densityp.98Vertical dark lines or streaksp.99Vertical white linesp.99The printer is not respondingp.100Job prints from the wrong tray or on the wrong paperp.101Color quality problemsp.102Adjusting toner darknessp.102Modifying the colors in printed outputp.102FAQ about color printingp.102The print appears tintedp.104Contacting customer supportp.104Upgrading and migratingp.105Hardwarep.105Available internal optionsp.105Installing a memory cardp.105Installing an internal solutions portp.107Installing an optional cardp.112Installing a printer hard diskp.114Installing optional traysp.118Softwarep.119Installing the printer softwarep.119Adding available options in the print driverp.119Firmwarep.119Exporting or importing a configuration filep.119Updating firmwarep.120Noticesp.121Product informationp.121Edition noticep.121GOVERNMENT END USERSp.121Licensing noticesp.122Trademarksp.122Noise emission levelsp.122Static sensitivity noticep.123Temperature informationp.123Laser noticep.123Laser advisory labelp.123Indexp.125
Page 129 of the Lexmark CS725 user manual — Table of contents
Page 129 · click to enlarge
Page 129

Table of contents

Contentsp.2Safety informationp.5Conventionsp.5Product statementsp.5Learning about the printerp.8Finding information about the printerp.8Selecting a location for the printerp.9Printer configurationsp.10Attaching cablesp.11Using the control panelp.12Understanding the status of the power button and indicator lightp.13Using the home screenp.13Menu mapp.15Printing a menu settings pagep.16Setting up and using the home screen applicationsp.17Customizing the home screenp.17Using Display Customizationp.17Setting up Forms and Favoritesp.17Configuring Eco-Settingsp.18Managing contactsp.18Adding contactsp.18Adding groupsp.18Editing contacts or groupsp.19Deleting contacts or groupsp.19Setting up and using the accessibility featuresp.20Enabling Magnification modep.20Activating Voice Guidancep.20Adjusting the Voice Guidance speech ratep.20Enabling spoken passwords or personal identification numbersp.20Navigating the screen using gesturesp.21Using the keyboard on the displayp.21Loading paper and specialty mediap.22Setting the size and type of the specialty mediap.22Configuring Universal paper settingsp.22Loading traysp.22Loading the multipurpose feederp.24Linking traysp.25Printingp.27Printing from a computerp.27Printing formsp.27Printing from a mobile devicep.27Printing from a mobile device using Lexmark Mobile Printp.27Printing from a mobile device using Google Cloud Printp.27Printing from a mobile device using Mopria Print Servicep.28Printing from a mobile device using AirPrintp.28Printing from a flash drivep.28Supported flash drives and file typesp.29Configuring confidential jobsp.30Printing held jobsp.30Printing a font sample listp.31Canceling a print jobp.31Securing the printerp.32Erasing printer memoryp.32Erasing printer hard disk memoryp.32Configuring printer hard disk encryptionp.32Restoring factory default settingsp.32Statement of Volatilityp.33Maintaining the printerp.34Adjusting the speaker volumep.34Adjusting the default internal speaker volumep.34Adjusting the default headphones volumep.34Networkingp.34Connecting the printer to a wireless network using Wi-Fi Protected Setup (WPS)p.34Changing port settings after installing an internal solutions portp.35Setting up serial printing (Windows only)p.35Cleaning the printerp.36Ordering suppliesp.37Checking the status of parts and suppliesp.37Using genuine Lexmark parts and suppliesp.37Ordering toner cartridgesp.37Ordering imaging unit or imaging kitp.39Ordering a waste toner bottlep.39Ordering a fuser maintenance kitp.39Ordering a transfer modulep.40Replacing parts and suppliesp.40Replacing the imaging unitp.40Replacing the imaging kitp.44Replacing a toner cartridgep.48Replacing the waste toner bottlep.50Replacing the fuserp.51Replacing the pick rollerp.52Replacing the separator padp.55Replacing the transfer modulep.57Resetting the maintenance counterp.61Moving the printerp.61Moving the printer to another locationp.61Shipping the printerp.61Saving energy and paperp.62Setting up power saver modesp.62Adjusting the brightness of the printer displayp.62Conserving suppliesp.62Recyclingp.62Recycling Lexmark productsp.62Recycling Lexmark packagingp.63Returning Lexmark cartridges for reuse or recyclingp.63Clearing jamsp.64Avoiding jamsp.64Identifying jam locationsp.65Paper jam in traysp.66Paper jam in the multipurpose feederp.67Paper jam in the standard binp.67Paper jam in door Ap.68Troubleshootingp.72Network connection problemsp.72Cannot open Embedded Web Serverp.72Unable to read flash drivep.73Enabling the USB portp.73Checking the printer connectivityp.73Hardware options problemsp.74Cannot detect internal optionp.74Internal solutions port does not operate correctlyp.75Parallel or serial interface card does not operate correctlyp.75Defective flash detectedp.76Not enough free space in flash memory for resourcesp.76Unformatted flash detectedp.76Issues with suppliesp.76Replace cartridge, printer region mismatchp.76Non-Lexmark supplyp.77Paper feed problemsp.77Envelope seals when printingp.77Collated printing does not workp.78Paper curlp.78Tray linking does not workp.79Check tray connectionp.79Paper frequently jamsp.80Jammed pages are not reprintedp.81Printing problemsp.81Confidential and other held documents do not printp.81Slow printingp.82Print jobs do not printp.83Print quality is poorp.84Blank or white pagesp.84Dark printp.85Ghost imagesp.87Gray backgroundp.87Horizontal dark linesp.88Horizontal white linesp.89Incorrect marginsp.90Jagged or uneven charactersp.91Light printp.92Mottled print and dotsp.93Print crooked or skewedp.94Repeating defectsp.95Solid color or black imagesp.96Text or images cut offp.97Toner easily rubs offp.98Uneven print densityp.98Vertical dark lines or streaksp.99Vertical white linesp.99The printer is not respondingp.100Job prints from the wrong tray or on the wrong paperp.101Color quality problemsp.102Adjusting toner darknessp.102Modifying the colors in printed outputp.102FAQ about color printingp.102The print appears tintedp.104Contacting customer supportp.104Upgrading and migratingp.105Hardwarep.105Available internal optionsp.105Installing a memory cardp.105Installing an internal solutions portp.107Installing an optional cardp.112Installing a printer hard diskp.114Installing optional traysp.118Softwarep.119Installing the printer softwarep.119Adding available options in the print driverp.119Firmwarep.119Exporting or importing a configuration filep.119Updating firmwarep.120Noticesp.121Product informationp.121Edition noticep.121GOVERNMENT END USERSp.121Licensing noticesp.122Trademarksp.122Noise emission levelsp.122Static sensitivity noticep.123Temperature informationp.123Laser noticep.123Laser advisory labelp.123Indexp.125
Sources

References & links

Pages referenced in this manual — manufacturer, support and downloads.

Ask about the Lexmark CS725

Owners and our team usually reply within a day — and your question helps the next person too.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
No questions yet about the Lexmark CS725

Be the first to ask — other owners or our team will answer.

Original document

Lexmark CS725 manual PDF

129 pages·5.3 MB·Printer·PDF
Click any page above to open it here
Page 1 / …
100%
Loading pages…