EN
Lexmark logo
Official user manual

Lexmark C 790

222 pages·6 MB·Printer·PDF·ENDEFRITNLJA
Lexmark C 790
Table of Contents 486 sections Contents · Safety information · Learning about the printer · Finding information about the printer · … ShowHide
Contentsp.2Safety informationp.6Learning about the printerp.8Finding information about the printerp.8Selecting a location for the printerp.9Printer configurationsp.10Understanding the printer control panelp.11Understanding the home screenp.13Understanding the home screenp.13Using the touch-screen buttonsp.14Setting up and using the home screen applicationsp.17Finding the IP address of the printerp.17Finding the IP address of the computerp.17Accessing the Embedded Web Serverp.17Activating the home screen applicationsp.18Exporting and importing a configurationp.20Additional printer setupp.21Installing internal optionsp.21Available internal optionsp.21Using the security lock featurep.22Accessing the system boardp.22Installing a memory cardp.26Installing a flash memory or firmware cardp.28Installing an Internal Solutions Portp.29Installing a printer hard diskp.33Removing a printer hard diskp.37Order of installationp.39Installing optional traysp.39Supported finishing featuresp.40Attaching cablesp.42Verifying printer setupp.43Printing a menu settings pagep.43Printing a network setup pagep.44Setting up the printer softwarep.44Installing the printerp.44Adding available options in the print driverp.44Setting up wireless printingp.45Preparing to set up the printer on a wireless networkp.45Installing the printer on a wireless network (Windows)p.46Installing the printer on a wireless network (Macintosh)p.47Changing port settings after installing a new network ISPp.50Setting up serial printing (Windows only)p.51Minimizing your printer's environmental impactp.52Saving paper and tonerp.52Using recycled paperp.52Conserving suppliesp.52Saving energyp.53Using Hibernate modep.53Using Eco-Modep.53Reducing printer noisep.54Adjusting Sleep modep.54Adjusting the brightness of the printer displayp.54Recyclingp.55Recycling Lexmark productsp.55Recycling Lexmark packagingp.55Returning Lexmark cartridges for reuse or recyclingp.55Loading paper and specialty mediap.57Setting the paper size and typep.57Configuring Universal paper settingsp.57Loading the standard or optional 550-sheet trayp.57Loading the 2000-sheet high-capacity feederp.60Loading the multipurpose feederp.63Linking and unlinking traysp.65Linking and unlinking traysp.65Linking exit binsp.66Creating a custom name for a paper typep.66Assigning a custom paper typep.66Paper and specialty media guidep.68Paper guidelinesp.68Paper characteristicsp.68Unacceptable paperp.69Selecting paperp.69Selecting preprinted forms and letterheadp.69Using recycled paper and other office papersp.70Storing paperp.70Supported paper sizes, types, and weightsp.71Supported paper sizesp.71Supported paper types and weightsp.72Printingp.74Printing a documentp.74Printing a documentp.74Printing in black and whitep.74Adjusting toner darknessp.74Printing from a flash drive or mobile devicep.75Printing from a flash drivep.75Supported flash drives and file typesp.76Printing from a mobile devicep.76Printing specialty documentsp.76Tips on using letterheadp.76Tips on using transparenciesp.77Tips on using envelopesp.77Tips on using labelsp.78Tips on using card stockp.78Printing confidential and other held jobsp.79Storing print jobs in the printerp.79Printing confidential and other held jobsp.79Printing information pagesp.80Printing a font sample listp.80Printing a directory listp.80Canceling a print jobp.81Canceling a print job from the printer control panelp.81Canceling a print job from the computerp.81Understanding the printer menusp.82Menus listp.82Supplies menup.83Paper menup.84Default Source menup.84Paper Size/Type menup.85Configure MP menup.88Substitute Size menup.88Paper Texture menup.88Paper Weight menup.90Paper Loading menup.92Custom Types menup.93Custom Names menup.94Custom Bin Names menup.94Universal Setup menup.94Bin Setup menup.95Reports menup.96Reports menup.96Network/Ports menup.97Active NIC menup.97Standard Network or Network [x] menusp.97Network Reports menup.99Network Card menup.99TCP/IP menup.99IPv6 menup.100Wireless menup.101AppleTalk menup.102Standard USB menup.102Parallel [x] menup.104Serial [x] menup.106SMTP Setup menup.108Security menup.110Miscellaneous Security Settings menup.110Confidential Print menup.110Erase Temporary Data Files menup.111Security Audit Log menup.112Set Date and Time menup.112Settings menup.113General Settings menup.113Flash Drive menup.119Setup menup.121Job Accounting menup.121Finishing menup.123Quality menup.125Utilities menup.128XPS menup.128PDF menup.128PostScript menup.129PCL Emul menup.129HTML menup.132Image menup.133Help menup.133Securing the memory before moving the printerp.135Statement of Volatilityp.135Erasing volatile memoryp.135Erasing non-volatile memoryp.135Erasing printer hard disk memoryp.136Configuring printer hard disk encryptionp.136Maintaining the printerp.138Cleaning the exterior of the printerp.138Cleaning the printhead lensesp.138Storing suppliesp.139Checking the status of suppliesp.140Checking the status of supplies from the printer control panelp.140Checking the status of supplies from a network computerp.140Ordering suppliesp.140Ordering a print cartridgep.140Ordering a fuser or a transfer modulep.141Ordering a waste toner bottlep.141Ordering staple cartridgesp.141Ordering a cleaning kitp.142Replacing suppliesp.142Replacing a print cartridgep.142Replacing the waste toner bottlep.145Moving the printerp.146Before moving the printerp.146Moving the printer to another locationp.147Shipping the printerp.147Administrative supportp.148Finding advanced networking and administrator informationp.148Using the Embedded Web Serverp.148Checking the virtual displayp.148Checking the status of the printerp.148Setting up e-mail alertsp.149Viewing reportsp.149Restoring factory default settingsp.149Clearing jamsp.151Avoiding jamsp.151Understanding jam numbers and locationsp.151200 paper jamp.153201 paper jamp.153202–203 paper jamsp.154230 paper jamp.155231–239 paper jamsp.15624x paper jamp.156250 paper jamp.157400–403 and 460–461 paper jamsp.158431–454, and 456–458 paper jamsp.159455 staple jamp.159Troubleshootingp.162Checking an unresponsive printerp.162Understanding the printer messagesp.162Adjusting colorp.162An error has occurred with the USB drive. Please remove and reinsert drive.p.162Change [paper source] to [custom type name]p.162Change [paper source] to [custom type name] load [orientation]p.162Change [paper source] to [custom string]p.163Change [paper source] to [custom string] load [orientation]p.163Change [paper source] to [paper size] [paper type]p.163Change [paper source] to [paper size] [paper type] load [orientation]p.163Close paper transport coverp.163Close left side doorp.163Close [tray] doorp.164Close finisher side doorp.164Close finisher top coverp.164Close front doorp.164Disk corruptedp.164Disk near full. Securely clearing disk space.p.164Disk problemp.164Empty the hole punch boxp.164Error reading USB drive. Remove USB.p.165Insert staple cartridgep.165Insert Tray [x]p.165Insert the hole punch boxp.165Install bin [x]p.165Install envelope feederp.165Install Tray [x]p.166Load [src] with [custom type name]p.166Load [src] with [custom string]p.166Load [src] with [size]p.166Load [src] with [type] [size]p.167Load Manual Feeder with [custom type name]p.167Load Manual Feeder with [custom string]p.167Load Manual Feeder with [paper type] [paper size]p.167Load staplesp.167Paper changes neededp.168Reattach bin [x]p.168Reattach bin [x] – [y]p.168Remove paper from standard output binp.169Remove paper from bin [x]p.169Remove paper from all binsp.169Remove paper from [linked set bin name]p.169Remove packaging material, [area name]p.169Restore held jobs?p.169Slide finisher to the leftp.169Some held jobs were not restoredp.169Supply needed to complete jobp.169Unsupported diskp.16931.xx Missing or defective [color] cartridgep.17032.xx [color] cartridge part number unsupported by devicep.17034 Incorrect paper size, open [src]p.17035 Insufficient memory to support Resource Save featurep.17036 Printer service requiredp.17037 Insufficient memory to collate jobp.17137 Insufficient memory for Flash Memory Defragment operationp.17137 Insufficient memory, some Held Jobs were deletedp.17137 Insufficient memory, some held jobs will not be restoredp.17138 Memory fullp.17139 Complex page, some data may not have printedp.17140 [color] invalid refill, change cartridgep.17151 Defective flash detectedp.17252 Not enough free space in flash memory for resourcesp.17253 Unformatted flash detectedp.17254 Serial option [x] errorp.17254 Standard network software errorp.17254 Network [x] software errorp.17255 Unsupported option in slot [x]p.17356 Parallel port [x] disabledp.17356 Serial port [x] disabledp.17356 Standard USB port disabledp.17356 Standard parallel port disabledp.17356 USB port [x] disabledp.17357 Configuration change, some held jobs were not restoredp.17458 Input config errorp.17458 Too many bins attachedp.17458 Too many disks installedp.17458 Too many flash options installedp.17458 Too many trays attachedp.17559 Incompatible output bin [x]p.17561 Remove defective diskp.17562 Disk fullp.17580.xx Fuser near life warningp.17580.xx Fuser life warningp.17580.xx Replace fuserp.17680.xx Fuser missingp.17682.xx Waste toner bottle nearly fullp.17682.xx Replace waste toner bottlep.17682.xx Waste toner bottle missingp.17683.xx Transfer module life warningp.17683.xx Transfer module missingp.17683.xx Replace transfer modulep.17688.xx [color] cartridge nearly lowp.17688.xx [color] cartridge lowp.17788.xx [Color] cartridge very lowp.17788.xx [Color] cartridge critically lowp.1771565 Emulation error, load emulation optionp.177Solving printing problemsp.177Multiple-language PDF files do not printp.177Printer control panel display is blank or displays only diamondsp.178Error message about reading USB drive appearsp.178Print jobs do not printp.178Make sure there is no problem with your printerp.178Make sure the printer is ready to printp.178Check if a supply is missing or needs replacementp.178Check if the standard exit bin is fullp.178Check if the paper tray is emptyp.178Make sure the correct printer software is installedp.178Make sure the internal print server is working properlyp.178Make sure you are using a recommended USB, serial, or Ethernet cablep.179Make sure printer cables are securely connectedp.179Confidential and other held jobs do not printp.179Partial job, no job, or blank page printsp.179Make sure the printer has sufficient memoryp.179Print job takes longer than expectedp.179Reduce the complexity of the print jobp.179Turn off the Page Protect settingp.179Change the environmental settingsp.179Job prints from the wrong tray or on the wrong paperp.180Check the paper type and paper size settingsp.180Incorrect characters printp.180Tray linking does not workp.180Load the same size and type of paperp.180Use the same Paper Size and Paper Type settingsp.180Large jobs do not collatep.180Make sure Collate is set to Onp.180Reduce the complexity of the print jobp.180Make sure the printer has enough memoryp.181Unexpected page breaksp.181Increase the Print Timeout valuep.181Solving home screen application problemsp.181An application error has occurredp.181Check the system log for relevant detailsp.181Contact customer supportp.181Solving option problemsp.181Option does not operate correctly or quits after it is installedp.181Reset the printerp.181Check to see if the option is connected to the printerp.182Make sure the option is installedp.182Make sure the option is available in the printer driverp.182Make sure the option is selectedp.182Paper tray problemsp.182Make sure the paper is loaded correctlyp.182Reset the printerp.182Make sure the paper tray is installed correctlyp.1822,000-sheet drawer problemsp.182Check the drawer connectionp.182Load paperp.183Clear any jamsp.183Avoid paper jamsp.183Cannot detect flash memory cardp.183Cannot detect printer hard diskp.183Internal Solutions Port does not operate correctlyp.183Check the Internal Solutions Port (ISP) connectionsp.183Check the cablep.183Make sure the network software is configured correctlyp.183Internal print server does not operate correctlyp.184Check the print server connectionsp.184Make sure the network software is configured correctlyp.184Memory cardp.184USB/parallel interface card does not operate correctlyp.184Check the USB/parallel interface card connectionp.184Check the cablep.184Solving paper feed problemsp.184Paper frequently jamsp.184Check the paperp.184Make sure there is not too much paper in the paper trayp.184Check the paper guidesp.185The paper may have absorbed moisture due to high humidityp.185Paper jam message remains after jam is clearedp.185Check the paper pathp.185Jammed pages are not reprintedp.185Turn on Jam Recoveryp.185Solving print quality problemsp.185Printer is printing blank pagesp.185Make sure there is no packing material left on the toner or print cartridgep.185Make sure the toner or print cartridge is not low on tonerp.186Characters have jagged or uneven edgesp.186Clipped imagesp.186Check the guidesp.186Check the paper size settingp.186Fine horizontal lines appear on color pagesp.187Shadow images appear on printsp.187Check the paper type and weight settingsp.187Make sure the print cartridge is not low on tonerp.187Gray background on printsp.188Make sure there is no worn or defective print cartridgep.188Incorrect marginsp.188Check the paper guidesp.188Check the paper size settingp.188Light colored line, white line, or incorrectly colored line appears on printsp.189Make sure there is no defective print cartridgep.189Make sure the transfer belt is not defectivep.189Paper curlp.189Check the paper type and weight settingsp.189Load paper from a fresh packagep.189Print irregularitiesp.189Load paper from a fresh packagep.190Check the paper type and weight settingsp.190Avoid textured paper with rough finishesp.190Make sure there is no defective print cartridgep.190Make sure the transfer belt is not defectivep.190Make sure the fuser is not defectivep.190Print is too darkp.190Load paper from a fresh packagep.190Avoid textured paper with rough finishesp.190Check the Paper Type settingp.191Make sure there is no defective print cartridgep.191Print is too lightp.191Load paper from a fresh packagep.191Avoid textured paper with rough finishesp.191Check the Paper Type settingp.191Make sure the print cartridge is not low on tonerp.191Make sure there is no defective print cartridgep.192Repeating defects appear on printsp.192Replace the print cartridgep.192Replace the fuserp.192Skewed printp.192Check the paper guidesp.192Check the paperp.193Solid color or black pages appear on printsp.193Make sure the print cartridges are installed correctly, are not defective and not low on tonerp.193Black or white streaks appear on transparencies or paperp.193Ensure that the fill pattern is correctp.193Check the paper typep.193Make sure the print cartridge is not low on tonerp.194Streaked horizontal lines appear on printsp.194Select another tray or feederp.194Make sure there is no worn, defective, or empty print cartridgep.194Toner fog or background shading appears on a pagep.194Make sure print cartridges are installed correctly and are not defectivep.194Make sure the transfer belt is not worn or defectivep.194Make sure the fuser is not worn or defectivep.195Make sure there is no toner in the paper pathp.195Recalibrate the printerp.195Check the software program or applicationp.195Toner rubs offp.195Check the paper type and weight settingsp.195Check the paper texture settingp.195Make sure the fuser is not worn or defectivep.195Transparency print quality is poorp.196Check the transparenciesp.196Check the paper type settingp.196Uneven print densityp.196Make sure there is no defective or worn print cartridgep.196Solving color quality problemsp.196FAQ about color printingp.196Embedded Web Server does not openp.199Check the network connectionp.199Check the address entered in the Web browserp.199Temporarily disable Web proxy serversp.199Contacting customer supportp.199Noticesp.201Product informationp.201Edition noticep.201GOVERNMENT END USERSp.201Trademarksp.202Federal Communications Commission (FCC) compliance information statementp.203Modular component noticep.203Licensing noticesp.203Noise emission levelsp.203Waste from Electrical and Electronic Equipment (WEEE) directivep.204India E-Waste noticep.204Battery noticep.204Static sensitivity noticep.204ENERGY STARp.205Temperature informationp.205Laser noticep.205Laser advisory labelp.205Power consumptionp.206Product power consumptionp.206Sleep Modep.206Hibernate Modep.206Off modep.207Total energy usagep.207Japanese VCCI noticep.207European Community (EC) directives conformityp.207Radio interference noticep.208Regulatory notices for wireless productsp.208Exposure to radio frequency radiationp.208Industry Canada (Canada)p.208Notice to users in the European Unionp.209STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.211Patent acknowledgmentp.213Indexp.215
Page 1 of the Lexmark C 790 user manual — October 2014 www.lexmark.com
Page 1 · click to enlarge
Page 1

C790 Series

User's Guide

October 2014 www.lexmark.com

Machine type(s):

Model(s):

210, 230, 235

Page 2 of the Lexmark C 790 user manual — Table of Contents
Page 2 · Contents
Contents

Contents

Contentsp.2Safety informationp.6Learning about the printerp.8Finding information about the printerp.8Selecting a location for the printerp.9Printer configurationsp.10Understanding the printer control panelp.11Understanding the home screenp.13Understanding the home screenp.13Using the touch-screen buttonsp.14Setting up and using the home screen applicationsp.17Finding the IP address of the printerp.17Finding the IP address of the computerp.17Accessing the Embedded Web Serverp.17Activating the home screen applicationsp.18Exporting and importing a configurationp.20Additional printer setupp.21Installing internal optionsp.21Available internal optionsp.21Using the security lock featurep.22Accessing the system boardp.22Installing a memory cardp.26Installing a flash memory or firmware cardp.28Installing an Internal Solutions Portp.29Installing a printer hard diskp.33Removing a printer hard diskp.37Order of installationp.39Installing optional traysp.39Supported finishing featuresp.40Attaching cablesp.42Verifying printer setupp.43Printing a menu settings pagep.43Printing a network setup pagep.44Setting up the printer softwarep.44Installing the printerp.44Adding available options in the print driverp.44Setting up wireless printingp.45Preparing to set up the printer on a wireless networkp.45Installing the printer on a wireless network (Windows)p.46Installing the printer on a wireless network (Macintosh)p.47Changing port settings after installing a new network ISPp.50Setting up serial printing (Windows only)p.51Minimizing your printer's environmental impactp.52Saving paper and tonerp.52Using recycled paperp.52Conserving suppliesp.52Saving energyp.53Using Hibernate modep.53Using Eco-Modep.53Reducing printer noisep.54Adjusting Sleep modep.54Adjusting the brightness of the printer displayp.54Recyclingp.55Recycling Lexmark productsp.55Recycling Lexmark packagingp.55Returning Lexmark cartridges for reuse or recyclingp.55Loading paper and specialty mediap.57Setting the paper size and typep.57Configuring Universal paper settingsp.57Loading the standard or optional 550-sheet trayp.57Loading the 2000-sheet high-capacity feederp.60Loading the multipurpose feederp.63Linking and unlinking traysp.65Linking and unlinking traysp.65Linking exit binsp.66Creating a custom name for a paper typep.66Assigning a custom paper typep.66Paper and specialty media guidep.68Paper guidelinesp.68Paper characteristicsp.68Unacceptable paperp.69Selecting paperp.69Selecting preprinted forms and letterheadp.69Using recycled paper and other office papersp.70Storing paperp.70Supported paper sizes, types, and weightsp.71Supported paper sizesp.71Supported paper types and weightsp.72Printingp.74Printing a documentp.74Printing a documentp.74Printing in black and whitep.74Adjusting toner darknessp.74Printing from a flash drive or mobile devicep.75Printing from a flash drivep.75Supported flash drives and file typesp.76Printing from a mobile devicep.76Printing specialty documentsp.76Tips on using letterheadp.76Tips on using transparenciesp.77Tips on using envelopesp.77Tips on using labelsp.78Tips on using card stockp.78Printing confidential and other held jobsp.79Storing print jobs in the printerp.79Printing confidential and other held jobsp.79Printing information pagesp.80Printing a font sample listp.80Printing a directory listp.80Canceling a print jobp.81Canceling a print job from the printer control panelp.81Canceling a print job from the computerp.81Understanding the printer menusp.82Menus listp.82Supplies menup.83Paper menup.84Default Source menup.84Paper Size/Type menup.85Configure MP menup.88Substitute Size menup.88Paper Texture menup.88Paper Weight menup.90Paper Loading menup.92Custom Types menup.93Custom Names menup.94Custom Bin Names menup.94Universal Setup menup.94Bin Setup menup.95Reports menup.96Reports menup.96Network/Ports menup.97Active NIC menup.97Standard Network or Network [x] menusp.97Network Reports menup.99Network Card menup.99TCP/IP menup.99IPv6 menup.100Wireless menup.101AppleTalk menup.102Standard USB menup.102Parallel [x] menup.104Serial [x] menup.106SMTP Setup menup.108Security menup.110Miscellaneous Security Settings menup.110Confidential Print menup.110Erase Temporary Data Files menup.111Security Audit Log menup.112Set Date and Time menup.112Settings menup.113General Settings menup.113Flash Drive menup.119Setup menup.121Job Accounting menup.121Finishing menup.123Quality menup.125Utilities menup.128XPS menup.128PDF menup.128PostScript menup.129PCL Emul menup.129HTML menup.132Image menup.133Help menup.133Securing the memory before moving the printerp.135Statement of Volatilityp.135Erasing volatile memoryp.135Erasing non-volatile memoryp.135Erasing printer hard disk memoryp.136Configuring printer hard disk encryptionp.136Maintaining the printerp.138Cleaning the exterior of the printerp.138Cleaning the printhead lensesp.138Storing suppliesp.139Checking the status of suppliesp.140Checking the status of supplies from the printer control panelp.140Checking the status of supplies from a network computerp.140Ordering suppliesp.140Ordering a print cartridgep.140Ordering a fuser or a transfer modulep.141Ordering a waste toner bottlep.141Ordering staple cartridgesp.141Ordering a cleaning kitp.142Replacing suppliesp.142Replacing a print cartridgep.142Replacing the waste toner bottlep.145Moving the printerp.146Before moving the printerp.146Moving the printer to another locationp.147Shipping the printerp.147Administrative supportp.148Finding advanced networking and administrator informationp.148Using the Embedded Web Serverp.148Checking the virtual displayp.148Checking the status of the printerp.148Setting up e-mail alertsp.149Viewing reportsp.149Restoring factory default settingsp.149Clearing jamsp.151Avoiding jamsp.151Understanding jam numbers and locationsp.151200 paper jamp.153201 paper jamp.153202–203 paper jamsp.154230 paper jamp.155231–239 paper jamsp.15624x paper jamp.156250 paper jamp.157400–403 and 460–461 paper jamsp.158431–454, and 456–458 paper jamsp.159455 staple jamp.159Troubleshootingp.162Checking an unresponsive printerp.162Understanding the printer messagesp.162Adjusting colorp.162An error has occurred with the USB drive. Please remove and reinsert drive.p.162Change [paper source] to [custom type name]p.162Change [paper source] to [custom type name] load [orientation]p.162Change [paper source] to [custom string]p.163Change [paper source] to [custom string] load [orientation]p.163Change [paper source] to [paper size] [paper type]p.163Change [paper source] to [paper size] [paper type] load [orientation]p.163Close paper transport coverp.163Close left side doorp.163Close [tray] doorp.164Close finisher side doorp.164Close finisher top coverp.164Close front doorp.164Disk corruptedp.164Disk near full. Securely clearing disk space.p.164Disk problemp.164Empty the hole punch boxp.164Error reading USB drive. Remove USB.p.165Insert staple cartridgep.165Insert Tray [x]p.165Insert the hole punch boxp.165Install bin [x]p.165Install envelope feederp.165Install Tray [x]p.166Load [src] with [custom type name]p.166Load [src] with [custom string]p.166Load [src] with [size]p.166Load [src] with [type] [size]p.167Load Manual Feeder with [custom type name]p.167Load Manual Feeder with [custom string]p.167Load Manual Feeder with [paper type] [paper size]p.167Load staplesp.167Paper changes neededp.168Reattach bin [x]p.168Reattach bin [x] – [y]p.168Remove paper from standard output binp.169Remove paper from bin [x]p.169Remove paper from all binsp.169Remove paper from [linked set bin name]p.169Remove packaging material, [area name]p.169Restore held jobs?p.169Slide finisher to the leftp.169Some held jobs were not restoredp.169Supply needed to complete jobp.169Unsupported diskp.16931.xx Missing or defective [color] cartridgep.17032.xx [color] cartridge part number unsupported by devicep.17034 Incorrect paper size, open [src]p.17035 Insufficient memory to support Resource Save featurep.17036 Printer service requiredp.17037 Insufficient memory to collate jobp.17137 Insufficient memory for Flash Memory Defragment operationp.17137 Insufficient memory, some Held Jobs were deletedp.17137 Insufficient memory, some held jobs will not be restoredp.17138 Memory fullp.17139 Complex page, some data may not have printedp.17140 [color] invalid refill, change cartridgep.17151 Defective flash detectedp.17252 Not enough free space in flash memory for resourcesp.17253 Unformatted flash detectedp.17254 Serial option [x] errorp.17254 Standard network software errorp.17254 Network [x] software errorp.17255 Unsupported option in slot [x]p.17356 Parallel port [x] disabledp.17356 Serial port [x] disabledp.17356 Standard USB port disabledp.17356 Standard parallel port disabledp.17356 USB port [x] disabledp.17357 Configuration change, some held jobs were not restoredp.17458 Input config errorp.17458 Too many bins attachedp.17458 Too many disks installedp.17458 Too many flash options installedp.17458 Too many trays attachedp.17559 Incompatible output bin [x]p.17561 Remove defective diskp.17562 Disk fullp.17580.xx Fuser near life warningp.17580.xx Fuser life warningp.17580.xx Replace fuserp.17680.xx Fuser missingp.17682.xx Waste toner bottle nearly fullp.17682.xx Replace waste toner bottlep.17682.xx Waste toner bottle missingp.17683.xx Transfer module life warningp.17683.xx Transfer module missingp.17683.xx Replace transfer modulep.17688.xx [color] cartridge nearly lowp.17688.xx [color] cartridge lowp.17788.xx [Color] cartridge very lowp.17788.xx [Color] cartridge critically lowp.1771565 Emulation error, load emulation optionp.177Solving printing problemsp.177Multiple-language PDF files do not printp.177Printer control panel display is blank or displays only diamondsp.178Error message about reading USB drive appearsp.178Print jobs do not printp.178Make sure there is no problem with your printerp.178Make sure the printer is ready to printp.178Check if a supply is missing or needs replacementp.178Check if the standard exit bin is fullp.178Check if the paper tray is emptyp.178Make sure the correct printer software is installedp.178Make sure the internal print server is working properlyp.178Make sure you are using a recommended USB, serial, or Ethernet cablep.179Make sure printer cables are securely connectedp.179Confidential and other held jobs do not printp.179Partial job, no job, or blank page printsp.179Make sure the printer has sufficient memoryp.179Print job takes longer than expectedp.179Reduce the complexity of the print jobp.179Turn off the Page Protect settingp.179Change the environmental settingsp.179Job prints from the wrong tray or on the wrong paperp.180Check the paper type and paper size settingsp.180Incorrect characters printp.180Tray linking does not workp.180Load the same size and type of paperp.180Use the same Paper Size and Paper Type settingsp.180Large jobs do not collatep.180Make sure Collate is set to Onp.180Reduce the complexity of the print jobp.180Make sure the printer has enough memoryp.181Unexpected page breaksp.181Increase the Print Timeout valuep.181Solving home screen application problemsp.181An application error has occurredp.181Check the system log for relevant detailsp.181Contact customer supportp.181Solving option problemsp.181Option does not operate correctly or quits after it is installedp.181Reset the printerp.181Check to see if the option is connected to the printerp.182Make sure the option is installedp.182Make sure the option is available in the printer driverp.182Make sure the option is selectedp.182Paper tray problemsp.182Make sure the paper is loaded correctlyp.182Reset the printerp.182Make sure the paper tray is installed correctlyp.1822,000-sheet drawer problemsp.182Check the drawer connectionp.182Load paperp.183Clear any jamsp.183Avoid paper jamsp.183Cannot detect flash memory cardp.183Cannot detect printer hard diskp.183Internal Solutions Port does not operate correctlyp.183Check the Internal Solutions Port (ISP) connectionsp.183Check the cablep.183Make sure the network software is configured correctlyp.183Internal print server does not operate correctlyp.184Check the print server connectionsp.184Make sure the network software is configured correctlyp.184Memory cardp.184USB/parallel interface card does not operate correctlyp.184Check the USB/parallel interface card connectionp.184Check the cablep.184Solving paper feed problemsp.184Paper frequently jamsp.184Check the paperp.184Make sure there is not too much paper in the paper trayp.184Check the paper guidesp.185The paper may have absorbed moisture due to high humidityp.185Paper jam message remains after jam is clearedp.185Check the paper pathp.185Jammed pages are not reprintedp.185Turn on Jam Recoveryp.185Solving print quality problemsp.185Printer is printing blank pagesp.185Make sure there is no packing material left on the toner or print cartridgep.185Make sure the toner or print cartridge is not low on tonerp.186Characters have jagged or uneven edgesp.186Clipped imagesp.186Check the guidesp.186Check the paper size settingp.186Fine horizontal lines appear on color pagesp.187Shadow images appear on printsp.187Check the paper type and weight settingsp.187Make sure the print cartridge is not low on tonerp.187Gray background on printsp.188Make sure there is no worn or defective print cartridgep.188Incorrect marginsp.188Check the paper guidesp.188Check the paper size settingp.188Light colored line, white line, or incorrectly colored line appears on printsp.189Make sure there is no defective print cartridgep.189Make sure the transfer belt is not defectivep.189Paper curlp.189Check the paper type and weight settingsp.189Load paper from a fresh packagep.189Print irregularitiesp.189Load paper from a fresh packagep.190Check the paper type and weight settingsp.190Avoid textured paper with rough finishesp.190Make sure there is no defective print cartridgep.190Make sure the transfer belt is not defectivep.190Make sure the fuser is not defectivep.190Print is too darkp.190Load paper from a fresh packagep.190Avoid textured paper with rough finishesp.190Check the Paper Type settingp.191Make sure there is no defective print cartridgep.191Print is too lightp.191Load paper from a fresh packagep.191Avoid textured paper with rough finishesp.191Check the Paper Type settingp.191Make sure the print cartridge is not low on tonerp.191Make sure there is no defective print cartridgep.192Repeating defects appear on printsp.192Replace the print cartridgep.192Replace the fuserp.192Skewed printp.192Check the paper guidesp.192Check the paperp.193Solid color or black pages appear on printsp.193Make sure the print cartridges are installed correctly, are not defective and not low on tonerp.193Black or white streaks appear on transparencies or paperp.193Ensure that the fill pattern is correctp.193Check the paper typep.193Make sure the print cartridge is not low on tonerp.194Streaked horizontal lines appear on printsp.194Select another tray or feederp.194Make sure there is no worn, defective, or empty print cartridgep.194Toner fog or background shading appears on a pagep.194Make sure print cartridges are installed correctly and are not defectivep.194Make sure the transfer belt is not worn or defectivep.194Make sure the fuser is not worn or defectivep.195Make sure there is no toner in the paper pathp.195Recalibrate the printerp.195Check the software program or applicationp.195Toner rubs offp.195Check the paper type and weight settingsp.195Check the paper texture settingp.195Make sure the fuser is not worn or defectivep.195Transparency print quality is poorp.196Check the transparenciesp.196Check the paper type settingp.196Uneven print densityp.196Make sure there is no defective or worn print cartridgep.196Solving color quality problemsp.196FAQ about color printingp.196Embedded Web Server does not openp.199Check the network connectionp.199Check the address entered in the Web browserp.199Temporarily disable Web proxy serversp.199Contacting customer supportp.199Noticesp.201Product informationp.201Edition noticep.201GOVERNMENT END USERSp.201Trademarksp.202Federal Communications Commission (FCC) compliance information statementp.203Modular component noticep.203Licensing noticesp.203Noise emission levelsp.203Waste from Electrical and Electronic Equipment (WEEE) directivep.204India E-Waste noticep.204Battery noticep.204Static sensitivity noticep.204ENERGY STARp.205Temperature informationp.205Laser noticep.205Laser advisory labelp.205Power consumptionp.206Product power consumptionp.206Sleep Modep.206Hibernate Modep.206Off modep.207Total energy usagep.207Japanese VCCI noticep.207European Community (EC) directives conformityp.207Radio interference noticep.208Regulatory notices for wireless productsp.208Exposure to radio frequency radiationp.208Industry Canada (Canada)p.208Notice to users in the European Unionp.209STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.211Patent acknowledgmentp.213Indexp.215
Page 6 of the Lexmark C 790 user manual — Safety information
Page 6 · click to enlarge
Page 6

Safety information

Connect the power cord directly to an appropriately rated and properly grounded electrical outlet that is near the product and easily accessible.

Do not place or use this product near water or wet locations.

This product uses a printing process that heats the print media, and the heat may cause the media to release emissions. You must understand the section in your operating instructions that discusses the guidelines for selecting print media to avoid the possibility of harmful emissions.

  • CAUTION—POTENTIAL INJURY: Before moving the printer, follow these guidelines to avoid personal injury or printer damage:
  • Turn the printer off using the power switch, and then unplug the power cord from the wall outlet.
  • Disconnect all cords and cables from the printer before moving it.
  • Lift the printer off the optional drawer, and set it aside instead of trying to lift the drawer and printer at the same time.

Use only the power cord provided with this product or the manufacturer's authorized replacement.

CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

This product is designed, tested, and approved to meet strict global safety standards with the use of specific manufacturer's components. The safety features of some parts may not always be obvious. The manufacturer is not responsible for the use of other replacement parts.

Safety information 6

Page 7 of the Lexmark C 790 user manual — Safety information
Page 7 · click to enlarge
Page 7

CAUTION—POTENTIAL INJURY: Do not cut, twist, bind, crush, or place heavy objects on the power cord. Do not subject the power cord to abrasion or stress. Do not pinch the power cord between objects such as furniture and walls. If any of these things happen, a risk of fire or electrical shock results. Inspect the power cord regularly for signs of such problems. Remove the power cord from the electrical outlet before inspecting it.

Refer service or repairs, other than those described in the user documentation, to a service representative.

CAUTION—TIPPING HAZARD: Floor-mounted configurations require additional furniture for stability. You must use either a printer stand or printer base if you are using a high-capacity input tray, a duplex unit and an input option, or more than one input option. If you purchased a multifunction printer (MFP) that scans, copies, and faxes, you may need additional furniture. For more information, see www.lexmark.com/multifunctionprinters.

SAVE THESE INSTRUCTIONS.

Safety information 7

Page 8 of the Lexmark C 790 user manual — Learning about the printer
Page 8 · click to enlarge
Page 8

Learning about the printer 8

Learning about the printer

Finding information about the printer

What are you looking for?Find it here Initial setup instructions: • Connecting the printer • Installing the printer softwareSetup documentation—The setup documentation came with the printer and is also available at http://support.lexmark.com. Additional setup and instructions for using the printer: • Selecting and storing paper and specialty media • Loading paper • Configuring printer settings • Viewing and printing documents and photos • Setting up and using the printer software • Configuring the printer on a network • Caring for and maintaining the printer • Troubleshooting and solving problemsUser's Guide and Quick Reference Guide—The guides are available at http://support.lexmark.com. Note: These guides are also available in other languages. Information on setting up and configuring the accessibility features of your printerLexmark Accessibility Guide—This guide is available at http://support.lexmark.com. Help using the printer softwareWindows or Mac Help—Open a printer software program or application, and then click Help. ? Click to view context‑sensitive information. Notes: • Help is automatically installed with the printer software. • The printer software is located in the printer program folder or on the desktop, depending on your operating system.
Page 9 of the Lexmark C 790 user manual — Selecting a location for the printer
Page 9 · click to enlarge
Page 9

Learning about the printer 9

What are you looking for?Find it here The latest supplemental information, updates, and customer support: • Documentation • Driver downloads • Live chat support • E‑mail support • Voice supportLexmark support Web site— http://support.lexmark.com Note: Select your country or region, and then select your product to view the appropriate support site. Support telephone numbers and hours of operation for your country or region can be found on the support Web site or on the printed warranty that came with your printer. Record the following information (located on the store receipt and at the back of the printer), and have it ready when you contact customer support so that they may serve you faster: • Machine Type number • Serial number • Date purchased • Store where purchased Warranty informationWarranty information varies by country or region: • In the U.S.—See the Statement of Limited Warranty included with this printer, or go to http://support.lexmark.com. • In other countries and regions—See the printed warranty that came with this printer.

Selecting a location for the printer

When selecting a location for the printer, leave enough room to open trays, covers, and doors. If you plan to install any options, leave enough room for them too. It is important to:

  • Make sure airflow in the room meets the latest revision of the ASHRAE 62 standard or the CEN Technical Committee 156 standard.
  • Provide a flat, sturdy, and stable surface.
  • Keep the printer: – Away from the direct airflow of air conditioners, heaters, or ventilators – Free from direct sunlight, humidity extremes, or temperature fluctuations – Clean, dry, and free of dust
  • Allow the following recommended amount of space around the printer for proper ventilation:
Page 10 of the Lexmark C 790 user manual — Printer configurations
Page 10 · click to enlarge
Page 10

Learning about the printer 10

Lexmark C 790 — Printer configurations diagram (page 10)
Fig. 1 · Printer configurations

1 152.4 mm (6.0 in.)

2 101.6 mm (4.0 in.)

3 609.6 mm (24.0 in.)

4 381 mm (15.0 in.)

5 304.8 mm (12.0 in.)

Printer configurations

CAUTION—TIPPING HAZARD: Floor‑mounted configurations require additional furniture for stability. You must use either a printer stand or printer base if you are using a high‑capacity input tray, a duplex unit and an input option, or more than one input option. If you purchased a multifunction printer (MFP) that scans, copies, and faxes, you may need additional furniture. For more information, see www.lexmark.com/multifunctionprinters.

You can configure your basic printer by adding optional trays.

Lexmark C 790 — Printer configurations diagram (page 10)
Fig. 2 · Printer configurations
Page 11 of the Lexmark C 790 user manual — Understanding the printer control panel
Page 11 · click to enlarge
Page 11

Learning about the printer 11

1Standard exit bin 2Wire bail 3Printer control panel 4Standard 550‑sheet tray 5Optional 550‑sheet tray 6Optional 2000‑sheet high‑capacity feeder 7Multipurpose feeder
Lexmark C 790 — Understanding the printer control panel diagram (page 11)
Fig. 3 · Understanding the printer control panel

Understanding the printer control panel

1 2 3 4

Lexmark C 790 — Understanding the printer control panel diagram (page 11)
Fig. 4 · Understanding the printer control panel
ItemDescription 1DisplayShows the status of the printer 2HomeLets you navigate back to the home screen 3KeypadAllows you to enter numbers, letters, or symbols on the printer 4SleepEnables Sleep Mode or Hibernate Mode The following are the statuses of the indicator light and the Sleep button: • Entering or waking from Sleep Mode—The indicator light is illuminated solid green, Sleep button is unilluminated. • Operating in Sleep Mode—The indicator light is illuminated solid green, Sleep button is illuminated solid amber. • Entering or waking from Hibernate Mode—The indicator light is illuminated solid green, Sleep button is illuminated blinking amber. • Operating in Hibernate Mode—The indicator light is unilluminated, Sleep button is blinking amber for 1/10 of a second, then go completely unilluminated for 1.9 seconds in pulsing pattern. The following actions wake the printer from Sleep Mode: • Touching the screen or any hard button presses. • Opening an input tray, cover, or door. • Sending a print job from the computer. • Performing a Power On Reset (POR) with the main power switch.
Page 12 of the Lexmark C 790 user manual — Understanding the printer control panel
Page 12 · click to enlarge
Page 12

Learning about the printer 12

ItemDescription 5Indicator lightOff—The printer is off. Blinking green—The printer is warming up, processing data, or printing. Solid green—The printer is on, but idle. Solid red—Operator intervention is needed. 6Stop/CancelStops all printer activity Note: A list of options is displayed once Stopped appears on the display. USB port
Page 13 of the Lexmark C 790 user manual — Understanding the home screen
Page 13 · click to enlarge
Page 13

Understanding the home screen 13

Understanding the home screen

Understanding the home screen

When the printer is turned on, the display shows a basic screen, referred to as the home screen. Use the home screen buttons and icons to initiate an action.

1 2 3 4

Lexmark C 790 — Understanding the home screen diagram (page 13)
Fig. 5 · Understanding the home screen
Lexmark C 790 — Understanding the home screen diagram (page 13)
Fig. 6 · Understanding the home screen

5 6 7 8

1 Change Language Change the primary language of the printer.

2 Bookmarks Create, organize, and save a set of bookmarks (URLs) into a tree view of folders and file links.

3 Held Jobs Display all current held jobs.

4 USB or USB Thumbdrive

View, select, or print photos and documents from a flash drive.

5 Menus Access printer menus.

  • 6 Status message bar
  • Show the current printer status such as Ready or Busy .
  • Show printer conditions such as Fuser missing or Cartridge Low .
  • Show intervention messages and the instructions on how to clear them.
  • 7 Status/Supplies
  • Display a warning or error message whenever the printer requires intervention to continue processing.
  • Access the messages screen for more information on the message, and how to clear it.

8 Tips Open a context‑sensitive Help information on the touch screen.

Touch To

Page 14 of the Lexmark C 790 user manual — Sample touch screen
Page 14 · click to enlarge
Page 14

Understanding the home screen 14

This may also appear on the home screen:

Search Held Jobs Search current held jobs.

Using the touch-screen buttons

Sample touch screen

1 2 3 4

Lexmark C 790 — Sample touch screen diagram (page 14)
Fig. 7 · Sample touch screen
Lexmark C 790 — Sample touch screen diagram (page 14)
Fig. 8 · Sample touch screen
Lexmark C 790 — Sample touch screen diagram (page 14)
Fig. 9 · Sample touch screen
Lexmark C 790 — Sample touch screen diagram (page 14)
Fig. 10 · Sample touch screen

5 6 7 8 9 10

Scroll up.

Delete the file you selected.

Scroll to the left.

Scroll to the right.

5 Right scroll increase

Scroll to another value in increasing order.

Show 6 more labels / short text on this page
Touch To · Touch To · 1 Up arrow · 2 Delete folder · 3 Left arrow · 4 Right arrow
Page 15 of the Lexmark C 790 user manual — Other touch-screen buttons
Page 15 · click to enlarge
Page 15

Understanding the home screen 15

6 Left scroll decrease

Scroll to another value in decreasing order.

Scroll down.

Save a setting.

  • Cancel an action or a selection.
  • Cancel out a screen and return to the previous screen.

Navigate back to the previous screen.

Other touch-screen buttons

Exit from the current screen to the home screen.

Select or clear an item.

Show 8 more labels / short text on this page
Touch To · 7 Down arrow · 8 Accept · 9 Cancel · 10 Back · Touch To · Exit · Radio button
Page 16 of the Lexmark C 790 user manual — Features
Page 16 · click to enlarge
Page 16

Understanding the home screen 16

Features

Menu trail line:

A menu trail line is located at the top of each menu screen. This feature acts as a trail, showing the path taken to arrive at the current menu. It gives the exact location within the menus.

Menus > Settings > Print Settings > Number of Copies

Number of Copies is not underlined since this is the current screen. If you touch an underlined word on the Number of Copies screen before the Number of Copies is set and saved, then the selection is not saved, and does not become the default setting.

If an attendance message affects a function, then this icon appears and the red indicator light blinks.

Feature Description · Attendance message alert

Page 17 of the Lexmark C 790 user manual — Accessing the Embedded Web Server
Page 17 · click to enlarge
Page 17

Setting up and using the home screen applications 17

Setting up and using the home screen applications

  • Your home screen may vary depending on your home screen customization settings, administrative setup, and active embedded applications. Some applications are supported only in some printer models.
  • There may be additional solutions and applications available for purchase. For more information, go to <a href="http://www.lexmark.com" rel="nofollow noopener" target="_blank">www.lexmark.com</a> or contact the place where you purchased the printer.

Finding the IP address of the printer

You can find the printer IP address:

  • From the top left corner of the printer home screen.
  • From the TCP/IP section in the Network/Ports menu.
  • By printing a network setup page or menu settings page, and then finding the TCP/IP section.

Finding the IP address of the computer

For Windows users

1 In the Run dialog box, type cmd to open the command prompt.

2 Type ipconfig, and then look for the IP address.

For Macintosh users

1 From System Preferences in the Apple menu, select Network.

2 Select your connection type, and then click Advanced > TCP/IP.

3 Look for the IP address.

Accessing the Embedded Web Server

The Embedded Web Server is the printer Web page that lets you view and remotely configure printer settings even when you are not physically near the printer.

  • 1 Obtain the printer IP address:
  • From the printer control panel home screen
  • From the TCP/IP section in the Network/Ports menu
  • By printing a network setup page or menu settings page, and then finding the TCP/IP section

2 Open a Web browser, and then type the printer IP address in the address field.

Page 18 of the Lexmark C 790 user manual — Forms and Favorites
Page 18 · click to enlarge
Page 18

Setting up and using the home screen applications 18

3 Press Enter.

1 From the Embedded Web Server, click Settings > General Settings > Home screen customization.

A list of basic printer functions appears.

2 Select the check boxes to specify which icons appear on the printer home screen.

Cleared check box items are hidden.

3 Click Submit.

Activating the home screen applications

For detailed information about configuring and using home screen applications, visit the Lexmark Web site at http://support.lexmark.com.

Background and Idle Screen

The application lets you customize the background and idle screen of your printer home screen.

Lexmark C 790 — Background and Idle Screen diagram (page 18)
Fig. 11 · Background and Idle Screen

To change the background of the printer home screen using the printer control panel, do the following:

1 From the home screen, navigate to:

Change Background > select background to use

Forms and Favorites

Lexmark C 790 — Forms and Favorites diagram (page 18)
Fig. 12 · Forms and Favorites

The application helps you simplify and streamline work processes by letting you quickly find and print frequently used online forms directly from the home screen. For example, you can print the latest version of a form exactly when you need it. This eliminates inventories of printed forms that can easily become outdated.

Icon Description · 2 Touch · Icon Description

Page 19 of the Lexmark C 790 user manual — Remote Operator Panel
Page 19 · click to enlarge
Page 19

Setting up and using the home screen applications 19

To configure Forms and Favorites, do the following:

1 From the Embedded Web Server, click Settings > Device Solutions > Solutions (eSF) > Forms and Favorites.

2 Define the bookmarks, and then customize the settings.

3 Click Apply.

To use the application, touch Forms and Favorites on the home screen, and then navigate through form categories, or search for forms based on a form number, name, or description.

Eco ‑ Settings

The application lets you easily manage energy consumption, noise, toner, and paper usage settings to help reduce the environmental impact of your printer.

Showroom

The application lets you create and display a customized slide show on the touch screen of your printer. You can specify how long each slide is displayed, and images can be loaded either from a flash drive or through the printer Embedded Web Server.

Remote Operator Panel

This application shows the printer control panel on your computer screen and lets you interact with the printer control panel, even when you are not physically near the printer. From your computer screen, you can view the printer status, release held print jobs, create bookmarks, and do other print-related tasks you might normally do while standing at the printer.

To activate Remote Operator Panel, do the following:

1 From the Embedded Web Server, click Settings > Device Solutions > Solutions (eSF) > Remote Operator Panel.

2 Select the Enabled check box, and then customize the settings.

3 Click Apply.

To use Remote Operator Panel, from the Embedded Web Server, click Applications > Remote Operator Panel > Launch VNC Applet.

Icon Description · Icon Description

Page 20 of the Lexmark C 790 user manual — For multiple applications
Page 20 · click to enlarge
Page 20

Setting up and using the home screen applications 20

Exporting and importing a configuration

You can export configuration settings into a text file, and then import the file to apply the settings to other printers.

1 Open a Web browser, and then type the printer IP address in the address field.

2 Export or import a configuration file for one or multiple applications.

For one application

a Navigate to:

Settings > Apps > Apps Management > select an application > Configure b Export or import the configuration file.

  • If a JVM Out of Memory error occurs, then repeat the export process until the configuration file is saved.
  • If a timeout occurs and a blank screen appears, then refresh the Web browser, and then click Apply .

For multiple applications

a Click Settings > Import/Export. b Export or import a configuration file.

Page 21 of the Lexmark C 790 user manual — Available internal options
Page 21 · click to enlarge
Page 21

Additional printer setup 21

Additional printer setup

Installing internal options

CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

You can customize your printer connectivity and memory capacity by adding optional cards.

Available internal options

  • Memory cards – Printer memory – Flash memory – Fonts
  • Firmware cards – Bar Code – PrintCryption TM
  • Printer hard disk
  • Lexmark TM Internal Solutions Ports (ISP) – RS ‑ 232 ‑ C Serial ISP – Parallel 1284 ‑ B ISP – MarkNet TM N8250 802.11 b/g/n Wireless ISP – MarkNet N8130 10/100 Fiber ISP – MarkNet N8120 10/100/1000 Ethernet ISP
Page 22 of the Lexmark C 790 user manual — Accessing the system board
Page 22 · click to enlarge
Page 22

Additional printer setup 22

Using the security lock feature

The printer is equipped with a security lock feature. When a lock compatible with most laptop computers is attached, the printer is locked. Once locked, the metal plate and the system board cannot be removed. Attach a security lock to the printer in the location shown.

Lexmark C 790 — Using the security lock feature diagram (page 22)
Fig. 13 · Using the security lock feature

Accessing the system board

CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

Page 23 of the Lexmark C 790 user manual — Using the security lock feature
Page 23 · click to enlarge
Page 23

Additional printer setup 23

1 Open the cover.

2 Remove the metal panel. a Turn the screws on the panel counterclockwise to remove them.

Lexmark C 790 — Using the security lock feature diagram (page 23)
Fig. 14 · Using the security lock feature

b Shift the metal panel to the left to disengage the hooks, then pull forward to remove it.

Lexmark C 790 — Using the security lock feature diagram (page 23)
Fig. 15 · Using the security lock feature

3 Use the following illustration to locate the appropriate connectors.

Page 24 of the Lexmark C 790 user manual — Using the security lock feature
Page 24 · click to enlarge
Page 24

Additional printer setup 24

Lexmark C 790 — Using the security lock feature diagram (page 24)
Fig. 16 · Using the security lock feature
Lexmark C 790 — Using the security lock feature diagram (page 24)
Fig. 17 · Using the security lock feature

4 Reattach the system board cover.

Page 25 of the Lexmark C 790 user manual — Using the security lock feature
Page 25 · click to enlarge
Page 25

Additional printer setup 25

to the right.

Lexmark C 790 — Using the security lock feature diagram (page 25)
Fig. 18 · Using the security lock feature

b Align and then turn each screw clockwise to tighten.

Lexmark C 790 — Using the security lock feature diagram (page 25)
Fig. 19 · Using the security lock feature

c Close the cover.

Page 26 of the Lexmark C 790 user manual — Installing a memory card
Page 26 · click to enlarge
Page 26

Additional printer setup 26

Installing a memory card

CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

An optional memory card can be purchased separately and attached to the system board.

1 Access the system board.

For more information, see “Accessing the system board” on page 22.

2 Unpack the memory card.

3 On the system board, open the memory card connector latches.

Page 27 of the Lexmark C 790 user manual — Installing a memory card
Page 27 · click to enlarge
Page 27

Additional printer setup 27

4 Align the notches on the memory card to the ridges on the connector.

Lexmark C 790 — Installing a memory card diagram (page 27)
Fig. 20 · Installing a memory card

5 Push the memory card straight into the connector until it clicks into place.

Lexmark C 790 — Installing a memory card diagram (page 27)
Fig. 21 · Installing a memory card

6 Reattach the system board cover.

1 Notch · 2 Ridge

Page 28 of the Lexmark C 790 user manual — Installing a flash memory or firmware card
Page 28 · click to enlarge
Page 28

Additional printer setup 28

Installing a flash memory or firmware card

The system board has two connections for an optional flash memory or firmware card. Only one of each may be installed, but the connectors are interchangeable.

CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

1 Access the system board.

2 Unpack the card.

3 Holding the card by its sides, align the plastic pins on the card with the holes on the system board.

Lexmark C 790 — Installing a flash memory or firmware card diagram (page 28)
Fig. 22 · Installing a flash memory or firmware card

4 Push the card firmly into place.

Lexmark C 790 — Installing a flash memory or firmware card diagram (page 28)
Fig. 23 · Installing a flash memory or firmware card
  • The entire length of the connector on the card must touch and be flush against the system board.

1 Plastic pins · 2 Metal pins

Page 29 of the Lexmark C 790 user manual — Installing an Internal Solutions Port
Page 29 · click to enlarge
Page 29

Additional printer setup 29

  • Be careful not to damage the connectors.

5 Reattach the system board cover.

Installing an Internal Solutions Port

The system board supports one optional Lexmark Internal Solutions Port (ISP).

CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

1 Access the system board.

For more information, see “Accessing the system board” on page 22.

2 Unpack the ISP and plastic tee.

3 Locate the appropriate connector on the system board.

Lexmark C 790 — Installing an Internal Solutions Port diagram (page 29)
Fig. 24 · Installing an Internal Solutions Port

4 Remove the printer hard disk.

For more information, see “Removing a printer hard disk” on page 37.

Page 30 of the Lexmark C 790 user manual — Installing an Internal Solutions Port
Page 30 · click to enlarge
Page 30

Additional printer setup 30

5 Remove the metal cover from the ISP opening.

Lexmark C 790 — Installing an Internal Solutions Port diagram (page 30)
Fig. 25 · Installing an Internal Solutions Port

6 Align the posts of the plastic tee to the holes on the system board, and press down until the tee clicks into place. Be sure each post of the tee has latched completely, and the tee is seated firmly on the system board.

Lexmark C 790 — Installing an Internal Solutions Port diagram (page 30)
Fig. 26 · Installing an Internal Solutions Port
Page 31 of the Lexmark C 790 user manual — Installing an Internal Solutions Port
Page 31 · click to enlarge
Page 31

Additional printer setup 31

7 Install the ISP on the plastic tee. Angle the ISP over the plastic tee, and then slant it toward the plastic tee so that any overhanging connectors will pass through the ISP opening in the system board cage.

Lexmark C 790 — Installing an Internal Solutions Port diagram (page 31)
Fig. 27 · Installing an Internal Solutions Port

8 Lower the ISP toward the plastic tee until the ISP is seated between the guides of the plastic tee.

Lexmark C 790 — Installing an Internal Solutions Port diagram (page 31)
Fig. 28 · Installing an Internal Solutions Port
Page 32 of the Lexmark C 790 user manual — Installing an Internal Solutions Port
Page 32 · click to enlarge
Page 32

Additional printer setup 32

9 Insert the long thumbscrew and turn it clockwise, enough to hold the ISP in place, but do not yet tighten the thumbscrew.

Lexmark C 790 — Installing an Internal Solutions Port diagram (page 32)
Fig. 29 · Installing an Internal Solutions Port

10 Attach the two provided screws to secure the ISP mounting bracket to the system board cage.

Lexmark C 790 — Installing an Internal Solutions Port diagram (page 32)
Fig. 30 · Installing an Internal Solutions Port

11 Tighten the long thumbscrew.

12 Insert the plug of the ISP interface cable into the receptacle of the system board.

Page 33 of the Lexmark C 790 user manual — Installing a printer hard disk
Page 33 · click to enlarge
Page 33

Additional printer setup 33

13 Reattach the system board cover.

Installing a printer hard disk

CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

1 Access the system board.

For more information, see “Accessing the system board” on page 22.

2 Unpack the printer hard disk.

Page 34 of the Lexmark C 790 user manual — Installing a printer hard disk
Page 34 · click to enlarge
Page 34

Additional printer setup 34

3 Locate the appropriate connector on the system board.

Lexmark C 790 — Installing a printer hard disk diagram (page 34)
Fig. 31 · Installing a printer hard disk

To install a printer hard disk onto the ISP:

a Using a flathead screwdriver, loosen the screws.

Lexmark C 790 — Installing a printer hard disk diagram (page 34)
Fig. 32 · Installing a printer hard disk

b Remove the screws attached to the printer hard disk mounting bracket, and then remove the bracket.

Page 35 of the Lexmark C 790 user manual — Installing a printer hard disk
Page 35 · click to enlarge
Page 35

Additional printer setup 35

c Align the standoffs of the printer hard disk to the holes in the ISP, and then press down on the printer hard disk until the standoffs are in place.

Lexmark C 790 — Installing a printer hard disk diagram (page 35)
Fig. 33 · Installing a printer hard disk

d Insert the plug of the printer hard disk interface cable into the receptacle of the ISP.

Lexmark C 790 — Installing a printer hard disk diagram (page 35)
Fig. 34 · Installing a printer hard disk
Page 36 of the Lexmark C 790 user manual — Installing a printer hard disk
Page 36 · click to enlarge
Page 36

Additional printer setup 36

To install a printer hard disk directly on the system board:

a Align the standoffs of the printer hard disk to the holes in the system board, and then press down on the printer

hard disk until the standoffs are in place.

Lexmark C 790 — Installing a printer hard disk diagram (page 36)
Fig. 35 · Installing a printer hard disk

b Use the two provided screws to attach the printer hard disk mounting bracket.

Lexmark C 790 — Installing a printer hard disk diagram (page 36)
Fig. 36 · Installing a printer hard disk

c Insert the plug of the printer hard disk interface cable into the receptacle of the system board.

Page 37 of the Lexmark C 790 user manual — Removing a printer hard disk
Page 37 · click to enlarge
Page 37

Additional printer setup 37

4 Reattach the system board cover.

Removing a printer hard disk

Page 38 of the Lexmark C 790 user manual — Removing a printer hard disk
Page 38 · click to enlarge
Page 38

Additional printer setup 38

1 Access the system board.

For more information, see “Accessing the system board” on page 22.

2 Unplug the printer hard disk interface cable from the system board, leaving the cable attached to the printer hard disk. To unplug the cable, squeeze the paddle at the plug of the interface cable to disengage the latch before pulling the cable out.

Lexmark C 790 — Removing a printer hard disk diagram (page 38)
Fig. 37 · Removing a printer hard disk

3 Remove the screws while holding the printer hard disk in place, and then remove the printer hard disk.

Lexmark C 790 — Removing a printer hard disk diagram (page 38)
Fig. 38 · Removing a printer hard disk

4 Set the printer hard disk aside.

5 Reattach the system board cover.

Page 39 of the Lexmark C 790 user manual — Installing optional trays
Page 39 · click to enlarge
Page 39

Additional printer setup 39

Order of installation

CAUTION—TIPPING HAZARD: Floor-mounted configurations require additional furniture for stability. You must use either a printer stand or printer base if you are using a high-capacity input tray, a duplex unit and an input option, or more than one input option. If you purchased a multifunction printer (MFP) that scans, copies, and faxes, you may need additional furniture. For more information, see www.lexmark.com/multifunctionprinters.

CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

Install the printer and any options you have purchased in the following order:

  • Caster base
  • Optional spacer
  • Optional 550 ‑ sheet trays or 2,000 ‑ sheet high ‑ capacity feeder
  • Standard 550 ‑ sheet trays
  • Printer

For information on installing a caster base, a 550‑ or 2,000‑sheet optional tray, spacer, or any of the finishers, see the setup documentation that came with the option.

Installing optional trays

The printer supports the following optional input sources:

  • 550 ‑ sheet tray
  • 2,000 ‑ sheet high ‑ capacity feeder

CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

CAUTION—TIPPING HAZARD: Floor-mounted configurations require additional furniture for stability. You must use either a printer stand or printer base if you are using a high-capacity input tray, a duplex unit and an input option, or more than one input option. If you purchased a multifunction printer (MFP) that scans, copies, and faxes, then you may need additional furniture. For more information, see www.lexmark.com/multifunctionprinters.

1 Unpack the optional tray, and then remove all packing material.

2 Place the tray near the printer.

3 Turn the printer off.

4 Align the printer with the tray, and then lower the printer into place.

Page 40 of the Lexmark C 790 user manual — Supported finishing features
Page 40 · click to enlarge
Page 40

Additional printer setup 40

Lexmark C 790 — Supported finishing features diagram (page 40)
Fig. 39 · Supported finishing features

1 Standard 550-sheet tray (Tray 1)

2 Optional 550-sheet trays

5 Turn the printer back on.

6 Set the printer software to recognize the optional input source.

For more information, see “Adding available options in the print driver” on page 44.

Supported finishing features

The printer supports the following finishing features:

  • 500 ‑ Sheet Offset Stacker
  • 500-Sheet Staple Finisher
  • 500-Sheet Staple, Hole Punch Finisher
  • 5 ‑ bin mailbox
Page 41 of the Lexmark C 790 user manual — Finisher bin
Page 41 · click to enlarge
Page 41

Additional printer setup 41

Lexmark C 790 — Supported finishing features diagram (page 41)
Fig. 40 · Supported finishing features

Standard bin

  • The paper capacity is 500 sheets.
  • Finishing options are not supported in this bin.
  • Envelopes are routed here.

Finisher bin

  • The paper capacity is 500 sheets.
  • Envelopes, A5, A6 and statement paper sizes are not supported in this bin.
Lexmark C 790 — Finisher bin diagram (page 41)
Fig. 41 · Finisher bin

Paper size Two‑hole punch Three‑ or four‑hole punch

1 Standard bin · 2 Finisher bin

Page 42 of the Lexmark C 790 user manual — Attaching cables
Page 42 · click to enlarge
Page 42

Additional printer setup 42

Lexmark C 790 — Attaching cables diagram (page 42)
Fig. 42 · Attaching cables

Paper size Two‑hole punch Three‑ or four‑hole punch

Attaching cables

Connect the printer to the computer using a USB cable or Ethernet cable.

Be sure to match the following:

  • The USB symbol on the cable with the USB symbol on the printer
  • The appropriate Ethernet cable to the Ethernet port
Page 43 of the Lexmark C 790 user manual — Printing a menu settings page
Page 43 · click to enlarge
Page 43

Additional printer setup 43

Lexmark C 790 — Verifying printer setup diagram (page 43)
Fig. 43 · Verifying printer setup
Lexmark C 790 — Verifying printer setup diagram (page 43)
Fig. 44 · Verifying printer setup

Verifying printer setup

When all hardware and software options are installed and the printer is turned on, verify that the printer is set up correctly by printing the following:

  • Menu settings page —Use this page to verify that all printer options are installed correctly. A list of installed options appears toward the bottom of the page. If an option you installed is not listed, then it is not installed correctly. Remove the option, and then install it again.
  • Network setup page —If your printer has Ethernet or wireless capability and is attached to a network, then print a network setup page to verify the network connection. This page also provides important information that aids network printing configuration.

Printing a menu settings page

From the home screen, navigate to:

> Reports > Menu Settings Page

Page 44 of the Lexmark C 790 user manual — For Windows users
Page 44 · click to enlarge
Page 44

Additional printer setup 44

Printing a network setup page

If the printer is attached to a network, then print a network setup page to verify the network connection. This page also provides important information that aids network printing configuration.

1 From the home screen, navigate to:

> Reports > Network Setup Page

2 Check the first section of the network setup page, and confirm that the status is Connected.

If the status is Not Connected, then the LAN drop may not be active, or the network cable may be malfunctioning. Consult a system support person for a solution, and then print another network setup page.

Setting up the printer software

Installing the printer

1 Obtain a copy of the software installer package.

2 Run the installer, and then follow the instructions on the computer screen.

3 For Macintosh users, add the printer.

Adding available options in the print driver

For Windows users

1 Open the printers folder.

From the Search charm, type run, and then navigate to:

Run > type control printers > OK

In Windows 7 or earlier

, or click Start and then click Run. b Type control printers.

c Press Enter, or click OK.

  • 2 Select the printer you want to update, and then do either of the following:
  • For Windows 7 or later, select Printer properties .
  • For earlier versions, select Properties .

3 Navigate to the Configuration tab, and then select Update Now ‑ Ask Printer.

4 Apply the changes.

In Windows 8 · a Click

Page 45 of the Lexmark C 790 user manual — Preparing to set up the printer on a wireless network
Page 45 · click to enlarge
Page 45

Additional printer setup 45

For Macintosh users

1 From System Preferences in the Apple menu, navigate to your printer, and then select Options & Supplies.

2 Navigate to the list of hardware options, and then add any installed options.

3 Apply the changes.

Setting up wireless printing

Preparing to set up the printer on a wireless network

  • Make sure your access point (wireless router) is turned on and is working properly.
  • Do not connect the installation or network cables until prompted to do so by the setup software.

Make sure you have the following information before setting up the printer on a wireless network:

  • SSID —The SSID is also referred to as the network name.
  • Wireless Mode (or Network Mode) —The mode is either infrastructure or ad hoc.
  • Channel (for ad hoc networks) —The channel defaults to automatic for infrastructure networks.

Some ad hoc networks will also require the automatic setting. Check with your system support person if you are not sure which channel to select. • Security Method—There are four basic options for Security Method: – WEP key

If your network uses more than one WEP key, then enter up to four in the provided spaces. Select the key currently in use on the network by selecting the default WEP transmit key. – WPA or WPA2 preshared key or passphrase

WPA includes encryption as an additional layer of security. The choices are AES or TKIP. Encryption must be set for the same type on the router and on the printer, or the printer will not be able to communicate on the network. – 802.1X–RADIUS

If you are installing the printer on an 802.1X network, then you may need the following:

  • Authentication type
  • Inner authentication type
  • 802.1X user name and password
  • Certificates – No security

If your wireless network does not use any type of security, then you will not have any security information.

Page 46 of the Lexmark C 790 user manual — Installing the printer on a wireless network (Windows)
Page 46 · click to enlarge
Page 46

Additional printer setup 46

– If you do not know the SSID of the network that your computer is connected to, then launch the wireless utility

of the computer network adapter, and then look for the network name. If you cannot find the SSID or the security information for your network, then see the documentation that came with the access point or contact your system support person. – To find the WPA/WPA2 preshared key or passphrase for the wireless network, see the documentation that

came with the access point, see the Embedded Web Server associated with the access point, or consult your system support person.

Installing the printer on a wireless network (Windows)

Before installing the printer on a wireless network, make sure:

  • Your wireless network is set up and is working properly.
  • The computer you are using is connected to the same wireless network where you want to set up the printer.

1 Connect the power cord to the printer, then to a properly grounded electrical outlet, and then turn on the printer.

Lexmark C 790 — Installing the printer on a wireless network (Windows) diagram (page 46)
Fig. 45 · Installing the printer on a wireless network (Window…
Lexmark C 790 — Installing the printer on a wireless network (Windows) diagram (page 46)
Fig. 46 · Installing the printer on a wireless network (Window…
  • 2 Obtain a copy of the software installer package.
  • From the Software and Documentation CD that came with your printer.
  • From our Web site: Go to <a href="http://support.lexmark.com" rel="nofollow noopener" target="_blank">http://support.lexmark.com</a> , and then navigate to: SUPPORT & DOWNLOAD > select your printer > select your operating system

3 Double‑click the software installer package.

Wait for the installation dialog to appear.

Page 47 of the Lexmark C 790 user manual — Prepare to configure the printer
Page 47 · click to enlarge
Page 47

Additional printer setup 47

If you are using the Software and Documentation CD and the installation dialog does not appear, then do the following:

In Windows 8

From the Search charm, type run, and then navigate to:

Apps list > Run > type D:\setup.exe > OK

In Windows 7 or earlier

or click Start, and then click Run. b In the Start Search or Run dialog, type D:\setup.exe.

c Press Enter or click OK.

4 Click Install, and then follow the instructions on the computer screen.

5 Select Wireless connection when asked to choose a connection type.

6 From the Wireless Configuration dialog, select Guided Setup (Recommended).

7 Temporarily connect a USB cable between the computer on the wireless network and the printer.

Lexmark C 790 — In Windows 7 or earlier diagram (page 47)
Fig. 47 · In Windows 7 or earlier

8 Follow the instructions on the computer screen.

Installing the printer on a wireless network (Macintosh)

Prepare to configure the printer

1 Connect the power cord to the printer, then to a properly grounded electrical outlet, and then turn on the printer.

a Click

Page 48 of the Lexmark C 790 user manual — Enter the printer information
Page 48 · click to enlarge
Page 48

Additional printer setup 48

Lexmark C 790 — Installing the printer on a wireless network (Macintosh) diagram (page 48)
Fig. 48 · Installing the printer on a wireless network (Macint…
Lexmark C 790 — Installing the printer on a wireless network (Macintosh) diagram (page 48)
Fig. 49 · Installing the printer on a wireless network (Macint…

2 Locate the printer MAC address. a From the printer control panel, navigate to:

> Reports > > Network Setup Page > or

> Reports > Network Setup Page b In the Standard Network Card section, look for UAA (MAC).

Enter the printer information

1 Access the AirPort options:

In Mac OS X version 10.5 or later

From the Apple menu, navigate to either of the following:

  • System Preferences > Network > Wi ‑ Fi
  • System Preferences > Network > AirPort

In Mac OS X version 10.4

From the Finder, navigate to:

Applications > Internet Connect > AirPort

2 From the Network Name pop‑up menu, select print server [yyyyyy], where the y’s are the last six digits of the MAC address located on the MAC address sheet.

3 Open a Web browser.

4 From the Bookmarks menu, select Show or Show All Bookmarks.

5 Under COLLECTIONS, select Bonjour or Rendezvous, and then double‑click the printer name.

6 From the Embedded Web Server, navigate to the location of the wireless settings information.

Page 49 of the Lexmark C 790 user manual — Configure your computer to use the printer wirelessly
Page 49 · click to enlarge
Page 49

Additional printer setup 49

Configure the printer for wireless access

1 Type the network name (SSID) in the appropriate field.

2 Select Infrastructure as your Network Mode setting if you are using an access point (wireless router).

3 Select the type of security you want to use to protect the wireless network.

4 Enter the security information necessary for the printer to connect to the wireless network.

5 Click Submit.

6 Open the AirPort application on the computer:

In Mac OS X version 10.5 or later

From the Apple menu, navigate to either of the following:

  • System Preferences > Network > Wi ‑ Fi
  • System Preferences > Network > AirPort

In Mac OS X version 10.4

From the Finder, navigate to:

Applications > Internet Connect > AirPort

7 From the Network pop‑up menu, select the name of the wireless network.

Configure your computer to use the printer wirelessly

To print on a network printer, each Macintosh user must install a custom printer driver file and create a print queue in the Printer Setup Utility or Print Center.

1 Install a printer driver file on the computer: a Obtain a copy of the software installer package.

  • From the Software and Documentation CD that came with your printer.
  • From our Web site: Go to <a href="http://support.lexmark.com" rel="nofollow noopener" target="_blank">http://support.lexmark.com</a> , and then navigate to: SUPPORT & DOWNLOAD > select your printer > select your operating system b Double ‑ click the installer package for the printer.

c Follow the instructions on the computer screen. d Select a destination, and then click Continue. e From the Easy Install screen, click Install.

f Type the user password, and then click OK. All necessary applications are installed in the computer. g Click Close when the installation is complete.

2 Add the printera For IP printing:

In Mac OS X version 10.5 or later

  • 1 From the Apple menu, navigate to either of the following:
  • System Preferences > Print & Scan
  • System Preferences > Print & Fax
Page 50 of the Lexmark C 790 user manual — For Windows users
Page 50 · click to enlarge
Page 50

Additional printer setup 50

2 Click +. 3 If necessary, click Add Printer or Scanner or Add Other Printer or Scanner. 4 Click the IP tab. 5 Type the IP address of the printer in the address field, and then click Add.

In Mac OS X version 10.4

1 From the Finder, navigate to: Applications > Utilities 2 Double‑click Printer Setup Utility or Print Center. 3 From the Printer List, choose Add, and then click IP Printer. 4 Type the IP address of the printer in the address field, and then click Add. b For AppleTalk printing:

  • Make sure AppleTalk is activated on your printer.
  • This feature is supported only in Mac OS X version 10.5 or earlier.

In Mac OS X version 10.5

1 From the Apple menu, navigate to: System Preferences > Print & Fax 2 Click +, and then navigate to: AppleTalk > select the printer from the list > Add

In Mac OS X version 10.4

1 From the Finder, navigate to: Applications > Utilities 2 Double‑click Printer Setup Utility or Print Center. 3 From the Printer List, click Add. 4 Click Default Browser tab > More Printers. 5 From the first pop‑up menu, select AppleTalk. 6 From the second pop‑up menu, select Local AppleTalk Zone. 7 Select the printer from the list, and then click Add.

Changing port settings after installing a new network ISP

  • If the printer has a static IP address, then you do not need to make any changes.
  • If the computers are configured to use the network name, instead of an IP address, then you do not need to make any changes.
  • If you are adding a wireless ISP to a printer previously configured for an Ethernet connection, then make sure the printer is disconnected from the Ethernet network.

For Windows users

1 Open the printers folder.

2 From the shortcut menu of the printer with the new ISP, open the printer properties.

Page 51 of the Lexmark C 790 user manual — Setting up serial printing (Windows only)
Page 51 · click to enlarge
Page 51

Additional printer setup 51

3 Configure the port from the list.

4 Update the IP address.

5 Apply the changes.

For Macintosh users

1 From System Preferences in the Apple menu, navigate to the list of printers, and then select + > IP.

2 Type the IP address in the address field.

3 Apply the changes.

Setting up serial printing (Windows only)

After installing the serial or communication (COM) port, configure the printer and the computer.

1 Set the parameters in the printer. a From the control panel, navigate to the menu for the port settings. b Locate the menu for the serial port settings, and then adjust the settings, if necessary.

c Save the settings.

2 From your computer, open the printers folder, and then select your printer.

3 Open the printer properties, and then select the COM port from the list.

4 Set the COM port parameters in Device Manager.

Use the Run dialog box to open the command prompt, and then type devmgmt.msc.

Page 52 of the Lexmark C 790 user manual — Check your first draft for accuracy
Page 52 · click to enlarge
Page 52

Minimizing your printer's environmental impact 52

Minimizing your printer's environmental impact

Lexmark is committed to environmental sustainability and is continually improving its printers to reduce their impact on the environment. We design with the environment in mind, engineer our packaging to reduce materials, and provide collection and recycling programs. For more information, see:

  • The Notices chapter
  • The Environmental Sustainability section of the Lexmark Web site at <a href="http://www.lexmark.com/environment" rel="nofollow noopener" target="_blank">www.lexmark.com/environment</a>
  • The Lexmark recycling program at <a href="http://www.lexmark.com/recycle" rel="nofollow noopener" target="_blank">www.lexmark.com/recycle</a>

By selecting certain printer settings or tasks, you may be able to reduce your printer's impact even further. This chapter outlines the settings and tasks that may yield a greater environmental benefit.

Saving paper and toner

Studies show that as much as 80% of the carbon footprint of a printer is related to paper usage. You can significantly reduce your carbon footprint by using recycled paper and the following printing suggestions, such as printing on both sides of the paper and printing multiple pages on one side of a single sheet of paper.

Using recycled paper

As an environmentally conscious company, Lexmark supports the use of recycled office paper produced specifically for use in laser printers. For more information on recycled papers that work well with your printer, see “Using recycled paper and other office papers” on page 70.

Conserving supplies

Use both sides of the paper

If your printer model supports two‑sided printing, then you can control whether print appears on one or two sides of the paper.

  • Two-sided printing is the default setting in the print driver.
  • For a complete list of supported products and countries, go to <a href="http://support.lexmark.com" rel="nofollow noopener" target="_blank">http://support.lexmark.com</a> .

Place multiple pages on one sheet of paper

You can print up to 16 consecutive pages of a multiple‑page document onto one side of a single sheet of paper by setting multiple page printing (N‑Up) for the print job.

Check your first draft for accuracy

Before printing or making multiple copies of a document:

  • Use the preview feature to see how the document looks like before you print it.
  • Print one copy of the document to check its content and format for accuracy.
Page 53 of the Lexmark C 790 user manual — Using Eco ‑ Mode
Page 53 · click to enlarge
Page 53

Minimizing your printer's environmental impact 53

Avoid paper jams

Correctly set the paper type and size to avoid paper jams. For more information, see “Avoiding jams” on page 151.

Saving energy

Using Hibernate mode

Hibernate is an ultra‑low‑power saving mode.

  • Three days is the default amount of time before the printer enters Hibernate mode.
  • Make sure to wake the printer from Hibernate mode before sending a print job. A hard reset or a long press of the Sleep button wakes the printer from Hibernate mode.
  • If the printer is in Hibernate mode, then the Embedded Web Server is disabled.

1 From the home screen, navigate to:

> Settings > General Settings

2 Touch Press Sleep Button or Press and Hold Sleep Button.

3 Touch Hibernate >

Using Eco ‑ Mode

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > General Settings > Eco‑Mode > select a setting

Off Use the factory default settings for all settings associated with Eco‑Mode. Off supports the performance specifications of the printer.

Energy Reduce energy use, especially when the printer is idle.

  • Printer engine motors do not start until it is ready to print. You may notice a short delay before the first page is printed.
  • The printer enters Sleep mode after one minute of inactivity.

Energy/Paper Use all the settings associated with Energy and Paper modes.

  • Plain Paper
  • Enable the automatic two ‑ sided (duplex) feature.
  • Turn off print log features.

3 Click Submit.

Use To

Page 54 of the Lexmark C 790 user manual — Using the Embedded Web Server
Page 54 · click to enlarge
Page 54

Minimizing your printer's environmental impact 54

Reducing printer noise

Enable Quiet Mode to reduce printer noise.

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > General Settings > Quiet Mode > select a setting

On Reduce printer noise.

  • Print jobs are processed at a reduced speed.
  • Printer engine motors do not start until a document is ready to print. There will be a short delay before the first page is printed.

Off Use factory default settings.

3 Click Submit.

Adjusting Sleep mode

1 From the home screen, navigate to:

> Settings > General Settings > Timeouts > Sleep Mode

2 In the Sleep Mode field, select the number of minutes the printer is idle before it enters Sleep mode.

3 Apply the changes.

Adjusting the brightness of the printer display

To save energy, or if you have trouble reading the display, adjust its brightness settings.

Using the Embedded Web Server

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > General Settings.

Use To

Page 55 of the Lexmark C 790 user manual — Returning Lexmark cartridges for reuse or recycling
Page 55 · click to enlarge
Page 55

Minimizing your printer's environmental impact 55

3 In the Screen Brightness field, enter the brightness percentage you want for the display.

4 Click Submit.

Recycling

Lexmark provides collection programs and environmentally progressive approaches to recycling. For more information, see:

  • The Notices chapter
  • The Environmental Sustainability section of the Lexmark Web site at <a href="http://www.lexmark.com/environment" rel="nofollow noopener" target="_blank">www.lexmark.com/environment</a>
  • The Lexmark recycling program at <a href="http://www.lexmark.com/recycle" rel="nofollow noopener" target="_blank">www.lexmark.com/recycle</a>

Recycling Lexmark products

To return Lexmark products for recycling:

1 Go to www.lexmark.com/recycle.

2 Find the product type you want to recycle, and then select your country or region from the list.

3 Follow the instructions on the computer screen.

Recycling Lexmark packaging

Lexmark continually strives to minimize packaging. Less packaging helps to ensure that Lexmark printers are transported in the most efficient and environmentally sensitive manner and that there is less packaging to dispose of. These efficiencies result in fewer greenhouse emissions, energy savings, and natural resource savings.

Lexmark cartons are 100% recyclable where corrugated recycling facilities exist. Facilities may not exist in your area.

The foam used in Lexmark packaging is recyclable where foam recycling facilities exist. Facilities may not exist in your area.

When you return a cartridge to Lexmark, you can reuse the box that the cartridge came in. Lexmark will recycle the box.

Returning Lexmark cartridges for reuse or recycling

Lexmark Cartridge Collection Program diverts millions of Lexmark cartridges from landfills annually by making it both easy and free for Lexmark customers to return used cartridges to Lexmark for reuse or recycling. One hundred percent of the empty cartridges returned to Lexmark are either reused or demanufactured for recycling. Boxes used to return the cartridges are also recycled.

To return Lexmark cartridges for reuse or recycling, follow the instructions that came with your printer or cartridge and use the prepaid shipping label. You can also do the following:

1 Go to www.lexmark.com/recycle.

2 From the Toner Cartridges section, select your country or region.

Page 56 of the Lexmark C 790 user manual — Recycling
Page 56 · click to enlarge
Page 56

Minimizing your printer's environmental impact 56

3 Follow the instructions on the computer screen.

Page 57 of the Lexmark C 790 user manual — Loading the standard or optional 550 ‑ sheet tray
Page 57 · click to enlarge
Page 57

Loading paper and specialty media 57

Loading paper and specialty media

The selection and handling of paper and specialty media can affect how reliably documents print. For more information, see “Avoiding jams” on page 151 and “Storing paper” on page 70.

Setting the paper size and type

The Paper Size setting is automatically sensed according to the position of the paper guides in each tray except the multipurpose feeder. The Paper Size setting for the multipurpose feeder must be set manually from the Paper Size menu. The Paper Type setting must be set manually for all trays that do not contain plain paper.

From the home screen navigate to:

> Paper Menu > Paper Size/Type > select a tray > select the paper size or type >

The factory default Paper Type setting is Plain Paper.

Configuring Universal paper settings

The Universal Paper Size is a user‑defined setting that lets you print on paper sizes that are not preset in the printer menus. Set the Paper Size for the specified tray to Universal when the size you want is not available from the Paper Size menu. Then, specify all of the following Universal size settings for your paper:

  • Units of Measure
  • Portrait Width
  • Portrait Height
  • The largest supported Universal size is 216 x 1219 mm (8.5 x 48 in.).
  • The smallest supported Universal size is 76 x 127 mm (3 x 5 in.) and loaded in the multipurpose feeder only.

From the home screen, navigate to:

> Paper Menu > Universal Setup > Units of Measure > select unit of measure > Portrait Width or Portrait

Height > select width or height >

Loading the standard or optional 550 ‑ sheet tray

The printer has one standard 550‑sheet tray (Tray 1), and may have one or more optional 550‑sheet trays. All 550‑sheet trays support the same paper sizes and types.

Page 58 of the Lexmark C 790 user manual — Loading paper and specialty media
Page 58 · click to enlarge
Page 58

Loading paper and specialty media 58

1 Pull the tray out.

Lexmark C 790 — Loading paper and specialty media diagram (page 58)
Fig. 50 · Loading paper and specialty media
Lexmark C 790 — Loading paper and specialty media diagram (page 58)
Fig. 51 · Loading paper and specialty media
Page 59 of the Lexmark C 790 user manual — Loading paper and specialty media
Page 59 · click to enlarge
Page 59

Loading paper and specialty media 59

2 Squeeze and then slide the width guide to the correct position for the paper size you are loading.

Lexmark C 790 — Loading paper and specialty media diagram (page 59)
Fig. 52 · Loading paper and specialty media

3 Squeeze and then slide the length guide to the correct position for the paper size you are loading.

Lexmark C 790 — Loading paper and specialty media diagram (page 59)
Fig. 53 · Loading paper and specialty media

4 Flex the sheets back and forth to loosen them. Do not fold or crease the paper. Straighten the edges on a level surface.

5 Load the paper stack with the recommended print side faceup.

  • Place the print side facedown for duplex printing.
Page 60 of the Lexmark C 790 user manual — Loading the 2000 ‑ sheet high ‑ capacity feeder
Page 60 · click to enlarge
Page 60

Loading paper and specialty media 60

  • Place pre-punched paper with the holes toward the front of the tray.
  • Place letterheads faceup with the header on the left side of the tray.
  • Place letterheads facedown with the header on the right side of the tray for duplex printing.
  • Make sure the paper is below the maximum fill line located on the edge of the paper tray. Overloading the tray can cause paper jams and possible printer damage.
Lexmark C 790 — Loading the 2000-sheet high-capacity feeder diagram (page 60)
Fig. 54 · Loading the 2000-sheet high-capacity feeder

6 Insert the tray.

Lexmark C 790 — Loading the 2000-sheet high-capacity feeder diagram (page 60)
Fig. 55 · Loading the 2000-sheet high-capacity feeder

7 From the printer control panel, verify the Paper Size and Paper Type for the tray based on the paper you loaded.

Loading the 2000 ‑ sheet high ‑ capacity feeder

The high‑capacity feeder can hold up to 2,000 sheets of A4‑, letter‑, or legal‑size paper (80 g/m2 or 20 lb).

Page 61 of the Lexmark C 790 user manual — Loading the 2000-sheet high-capacity feeder
Page 61 · click to enlarge
Page 61

Loading paper and specialty media 61

1 Pull the tray out.

Lexmark C 790 — Loading the 2000-sheet high-capacity feeder diagram (page 61)
Fig. 56 · Loading the 2000-sheet high-capacity feeder

2 Adjust the width guide as necessary.

Lexmark C 790 — Loading the 2000-sheet high-capacity feeder diagram (page 61)
Fig. 57 · Loading the 2000-sheet high-capacity feeder

3 Flex the sheets back and forth to loosen them. Do not fold or crease the paper. Straighten the edges on a level surface.

Page 62 of the Lexmark C 790 user manual — Loading the 2000-sheet high-capacity feeder
Page 62 · click to enlarge
Page 62

Loading paper and specialty media 62

4 Load paper into the tray with the print side faceup.

Lexmark C 790 — Loading the 2000-sheet high-capacity feeder diagram (page 62)
Fig. 58 · Loading the 2000-sheet high-capacity feeder
Lexmark C 790 — Loading the 2000-sheet high-capacity feeder diagram (page 62)
Fig. 59 · Loading the 2000-sheet high-capacity feeder
  • Place pre-punched paper with the holes toward the front of the tray.
  • Place letterheads faceup with the header on the left side of the tray.
  • Place letterheads facedown with the header on the right side of the tray for duplex printing.

5 Insert the tray.

Page 63 of the Lexmark C 790 user manual — Loading the multipurpose feeder
Page 63 · click to enlarge
Page 63

Loading paper and specialty media 63

Loading the multipurpose feeder

The multipurpose feeder can hold several sizes and types of print media, such as transparencies, labels, card stock, and envelopes. It can be used for single-page or manual printing, or as an additional tray.

The multipurpose feeder can hold approximately:

  • 100 sheets of 75 ‑ g/m 2 (20 ‑ lb) paper
  • 10 envelopes
  • 75 transparencies

The multipurpose feeder accepts paper or specialty media within the following dimensions:

  • Width—89 mm (3.5 in.) to 229 mm (9.02 in.)
  • Length—127 mm (5 in.) to 1270 mm (50 in.)

1 Pull down the multipurpose feeder door.

Lexmark C 790 — Loading the multipurpose feeder diagram (page 63)
Fig. 60 · Loading the multipurpose feeder

2 For paper or specialty media that is longer than letter-size paper, gently pull the extension until it is fully extended.

Lexmark C 790 — Loading the multipurpose feeder diagram (page 63)
Fig. 61 · Loading the multipurpose feeder

3 Flex the sheets of paper or specialty media back and forth to loosen them. Do not fold or crease them. Straighten the edges on a level surface.

Page 64 of the Lexmark C 790 user manual — Loading the multipurpose feeder
Page 64 · click to enlarge
Page 64

Loading paper and specialty media 64

Lexmark C 790 — Loading the multipurpose feeder diagram (page 64)
Fig. 62 · Loading the multipurpose feeder

4 Push the paper pick tab, and then load the paper or specialty media. Slide the stack gently into the multipurpose feeder until it comes to a stop, and then release the paper pick tab.

Lexmark C 790 — Loading the multipurpose feeder diagram (page 64)
Fig. 63 · Loading the multipurpose feeder
  • Load paper and transparencies with the recommended print side facedown and the short edge entering the printer first.
  • For duplex letterhead printing, place the letterhead faceup and the header entering the printer last.
Page 65 of the Lexmark C 790 user manual — Linking and unlinking trays
Page 65 · click to enlarge
Page 65

Loading paper and specialty media 65

  • Load envelopes with the flap side up and to the right.
Lexmark C 790 — Linking and unlinking trays diagram (page 65)
Fig. 64 · Linking and unlinking trays
  • Do not exceed the maximum stack height by forcing paper or transparencies under the stack height limiter.
  • Load only one size and type of paper at a time.

5 Adjust the width guide to lightly touch the edge of the stack. Make sure the paper or specialty media fits loosely in the multipurpose feeder, lies flat, and is not bent or wrinkled.

Lexmark C 790 — Linking and unlinking trays diagram (page 65)
Fig. 65 · Linking and unlinking trays

6 From the printer control panel, set the Paper Size and Paper Type for the multipurpose feeder (MP Feeder Size and MP Feeder Type) based on the paper or specialty media loaded.

Linking and unlinking trays

The printer links trays when the specified paper size and type are the same. When a linked tray becomes empty, paper feeds from the next linked tray. To prevent trays from linking, assign a unique custom paper type name.

Linking and unlinking trays

1 Open a Web browser, and then type the printer IP address in the address field.

Page 66 of the Lexmark C 790 user manual — Using the Embedded Web Server
Page 66 · click to enlarge
Page 66

Loading paper and specialty media 66

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Paper Menu.

  • 3 Change the paper size and type settings for the trays you are linking.
  • To link trays, make sure the paper size and type for the tray match that of the other tray.
  • To unlink trays, make sure the paper size or type for the tray does not match that of the other tray.

4 Click Submit.

Linking exit bins

Link exit bins to create a single output source. The printer automatically uses the next available bin as the output source.

The standard exit bin holds up to 550 sheets of 20‑lb paper. If you need additional output capacity, you can purchase other optional exit bins.

1 From the home screen, navigate to:

> Paper Menu > Bin Setup

2 Touch the bin or bins you want to link, and then touch Configure Bins > Link.

Creating a custom name for a paper type

1 From the home screen, navigate to:

> Paper Menu > Custom Names

2 Type a custom paper type name, and then apply the changes.

3 Touch Custom Types, and then verify if the new custom paper type name has replaced the custom name.

Assigning a custom paper type

Using the Embedded Web Server

Assign a custom paper type name to a tray when linking or unlinking trays.

1 Open a Web browser, and then type the printer IP address in the address field.

Page 67 of the Lexmark C 790 user manual — Using the printer control panel
Page 67 · click to enlarge
Page 67

Loading paper and specialty media 67

  • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Settings > Paper Menu > Custom Types.

3 Select a custom paper type name, and then select a paper type.

4 Click Submit.

Using the printer control panel

1 From the home screen, navigate to:

> Paper Menu > Custom Types

2 Select a custom paper type name, and then select a paper type.

3 Touch Submit.

Page 68 of the Lexmark C 790 user manual — Grain direction
Page 68 · click to enlarge
Page 68

Paper and specialty media guide 68

Paper and specialty media guide

Paper guidelines

Paper characteristics

The following paper characteristics affect print quality and reliability. Consider these characteristics when evaluating new paper stock.

Weight

The printer can automatically feed paper weights from 60 to 176‑g/m2 (16 to 47‑lb) bond grain long. Paper lighter than 60 g/m2 (16 lb) might not be stiff enough to feed properly, causing jams. For best performance, use 75‑g/m2 (20‑lb) bond grain long paper. For paper smaller than 182 x 257 mm (7 x 10 in.), we recommend 90‑g/m2 (24‑lb) or heavier paper.

Curl

Curl is the tendency for paper to curl at its edges. Excessive curl can cause paper feeding problems. Curl can occur after the paper passes through the printer, where it is exposed to high temperatures. Storing paper unwrapped in hot, humid, cold, or dry conditions, even in the trays, can contribute to paper curling prior to printing and can cause feeding problems.

Smoothness

Paper smoothness directly affects print quality. If paper is too rough, the toner cannot fuse to it properly. If paper is too smooth, it can cause paper feeding or print quality issues. Always use paper between 100 and 300 Sheffield points; however, smoothness between 150 and 200 Sheffield points produces the best print quality.

Moisture content

The amount of moisture in paper affects both print quality and the ability of the printer to feed the paper correctly. Leave paper in its original wrapper until it is time to use it. This limits the exposure of paper to moisture changes that can degrade its performance.

Condition paper before printing by storing it in its original wrapper in the same environment as the printer for 24 to 48 hours before printing. Extend the time several days if the storage or transportation environment is very different from the printer environment. Thick paper may also require a longer conditioning period.

Grain direction

Grain refers to the alignment of the paper fibers in a sheet of paper. Grain is either grain long, running the length of the paper, or grain short, running the width of the paper.

For 60–135‑g/m2 (16–36‑lb) bond paper, grain long paper is recommended. For papers heavier than 135 g/m2, grain short is recommended.

Page 69 of the Lexmark C 790 user manual — Selecting preprinted forms and letterhead
Page 69 · click to enlarge
Page 69

Paper and specialty media guide 69

Fiber content

Most high‑quality xerographic paper is made from 100% chemically treated pulped wood. This content provides the paper with a high degree of stability resulting in fewer paper feeding problems and better print quality. Paper containing fibers such as cotton can negatively affect paper handling.

Unacceptable paper

The following paper types are not recommended for use with the printer:

  • Chemically treated papers used to make copies without carbon paper, also known as carbonless papers, carbonless copy paper (CCP), or no carbon required (NCR) paper
  • Preprinted papers with chemicals that may contaminate the printer
  • Preprinted papers that can be affected by the temperature in the printer fuser
  • Preprinted papers that require a registration (the precise print location on the page) greater than ±2.3 mm (±0.9 in.), such as optical character recognition (OCR) forms
  • In some cases, registration can be adjusted with a software application to successfully print on these forms.
  • Coated papers (erasable bond), synthetic papers, thermal papers
  • Rough ‑ edged, rough or heavily textured surface papers, or curled papers
  • Recycled papers that fail EN12281:2002 (European)
  • Paper weighing less than 60 g/m 2 (16 lb)
  • Multiple ‑ part forms or documents

Selecting paper

Using appropriate paper prevents jams and helps ensure trouble‑free printing.

To help avoid jams and poor print quality:

  • Always use new, undamaged paper.
  • Before loading paper, know the recommended print side of the paper. This information is usually indicated on the paper package.
  • Do not use paper that has been cut or trimmed by hand.
  • Do not mix paper sizes, types, or weights in the same source; mixing results in jams.
  • Do not use coated papers unless they are specifically designed for electrophotographic printing.

Selecting preprinted forms and letterhead

Use these guidelines when selecting preprinted forms and letterhead:

  • Use grain long for 60 to 90 g/m 2 (16 to 24 lb) weight paper.
  • Use only forms and letterhead printed using an offset lithographic or engraved printing process.
  • Avoid papers with rough or heavily textured surfaces.

Use papers printed with heat‑resistant inks designed for use in xerographic copiers. The ink must be able to withstand temperatures up to 190°C (374°F) without melting or releasing hazardous emissions. Use inks that are not affected by the resin in toner. Inks that are oxidation‑set or oil‑based generally meet these requirements; latex inks might not. When in doubt, contact the paper supplier.

Page 70 of the Lexmark C 790 user manual — Storing paper
Page 70 · click to enlarge
Page 70

Paper and specialty media guide 70

Preprinted papers such as letterhead must be able to withstand temperatures up to 190°C (374°F) without melting or releasing hazardous emissions.

Using recycled paper and other office papers

As an environmentally conscious company, Lexmark supports the use of recycled office paper produced specifically for use in laser (electrophotographic) printers. In 1998, Lexmark presented to the US government a study demonstrating that recycled paper produced by major mills in the US fed as well as non-recycled paper. However, no blanket statement can be made that all recycled paper will feed well.

Lexmark consistently tests its printers with recycled paper (20–100% post-consumer waste) and a variety of test paper from around the world, using chamber tests for different temperature and humidity conditions. Lexmark has found no reason to discourage the use of today's recycled office papers, but generally the following property guidelines apply to recycled paper.

  • Low moisture content (4–5%)
  • Suitable smoothness (100–200 Sheffield units, or 140–350 Bendtsen units, European)
  • Note: Some much smoother papers (such as premium 24 lb laser papers, 50–90 Sheffield units) and much rougher papers (such as premium cotton papers, 200–300 Sheffield units) have been engineered to work very well in laser printers, despite surface texture. Before using these types of paper, consult your paper supplier.
  • Suitable sheet-to-sheet coefficient of friction (0.4–0.6)
  • Sufficient bending resistance in the direction of feed

Recycled paper, paper of lower weight (

Storing paper

Use these paper storage guidelines to help avoid jams and uneven print quality:

  • For best results, store paper where the temperature is 21°C (70°F) and the relative humidity is 40%. Most label manufacturers recommend printing in a temperature range of 18 to 24°C (65 to 75°F) with relative humidity between 40 and 60%.
  • Store paper in cartons when possible, on a pallet or shelf, rather than on the floor.
  • Store individual packages on a flat surface.
  • Do not store anything on top of individual paper packages.
Page 71 of the Lexmark C 790 user manual — Supported paper sizes
Page 71 · click to enlarge
Page 71

Paper and specialty media guide 71

Supported paper sizes, types, and weights

The following tables provide information on standard and optional paper sources and the sizes, types, and weights of paper they support.

Supported paper sizes

Measurements apply to one‑sided printing only. For two‑sided printing, the minimum size is 139.7 x 210 mm (5.50 x 8.27 in.).

Lexmark C 790 — Supported paper sizes diagram (page 71)
Fig. 66 · Supported paper sizes

Paper size Dimensions Standard 550‑sheet tray (Tray 1)

Optional 550‑sheet tray Optional 2,000‑sheet tray

A4 210 x 297 mm (8.27 x 11.7 in.)

A5 148 x 210 mm (5.83 x 8.27 in.)

A6 105 x 148 mm (4.13 x 5.83 in.)

JIS B5 182 x 257 mm (7.17 x 10.1 in.)

Letter 215.9 x 279.4 mm (8.5 x 11 in.)

Legal 215.9 x 355.6 mm (8.5 x 14 in.)

Executive 184.2 x 266.7 mm (7.25 x 10.5 in.)

Oficio (México) 215.9 x 340.4 mm (8.5 x 13.4 in.)

Folio 215.9 x 330.2 mm (8.5 x 13 in.)

Statement 139.7 x 215.9 mm (5.5 x 8.5 in.)

1 This formats the envelope size setting for 215.9 x 355.6 mm (8.5 x 14 in.) unless the size is specified by the application.

Page 72 of the Lexmark C 790 user manual — Supported paper types and weights
Page 72 · click to enlarge
Page 72

Paper and specialty media guide 72

Lexmark C 790 — Supported paper types and weights diagram (page 72)
Fig. 67 · Supported paper types and weights

Paper size Dimensions Standard 550‑sheet tray (Tray 1)

Optional 550‑sheet tray Optional 2,000‑sheet tray

76.2 x 76.2 mm (3 x 3 in.) to 215.9 x 355.6 mm (8.5 x 14 in.)

76.2 x 76.2 mm (3 x 3 in.) to 215.9 x 914.4 mm (8.5 x 36 in.)

76.2 x 76.2 mm (3 x 3 in.) to 215.9 x 1219.2 mm (8.5 x 48 in.)

9 Envelope 98.4 x 226.1 mm (3.875 x 8.9 in.)

DL Envelope 110 x 220 mm (4.33 x 8.66 in.)

C5 Envelope 162 x 229 mm (6.38 x 9.01 in.)

B5 Envelope 176 x 250 mm (6.93 x 9.84 in.)

215.9 x 355.6 mm (3.375 x 6.50 in. to 8.5 x 14 in.)

1 This formats the envelope size setting for 215.9 x 355.6 mm (8.5 x 14 in.) unless the size is specified by the application.

Supported paper types and weights

The printer supports 60–176 g/m2 (16–47 lb) paper weights for one‑sided printing. Two‑sided printing is supported on 64–176 g/m2 (17–47 lb) paper weights.

Page 73 of the Lexmark C 790 user manual — Supported paper types and weights
Page 73 · click to enlarge
Page 73

Paper and specialty media guide 73

Paper type Standard 550‑sheet tray (Tray 1)

Optional 550‑sheet tray Optional 2,000‑sheet tray Multipurpose feeder

  • Plain
  • Recycled
  • Glossy
  • Heavy Glossy
  • Bond
  • Letterhead
  • Preprinted
  • Colored
  • Light
  • Heavy
  • Rough/Cotton
  • Custom Type [x]

Transparencies1, 2 X

  • Paper
  • Vinyl

Envelopes4 X

1 This media is supported only in the multipurpose feeder.

2 Do not use inkjet or 3M CG3710 transparencies.

3 Paper labels are supported. Other media such as vinyl may show print quality defects in some environments, and prolonged vinyl label usage may reduce fuser life. For more information, see the Card Stock & Label Guide available on the Lexmark Web site at http://support.lexmark.com.

4 Use envelopes that lie flat when individually placed facedown on a table.

Show 4 more labels / short text on this page
Duplexer · Paper · Card stock X · Labels3
Page 74 of the Lexmark C 790 user manual — Adjusting toner darkness
Page 74 · click to enlarge
Page 74

Printing

Printing a document

Printing a document

1 From the printer control panel, set the paper type and size to match the paper loaded.

2 Send the print job:

For Windows users

a With a document open, click File > Print. b Click Properties, Preferences, Options, or Setup.

c Adjust the settings, if necessary. d Click OK > Print.

For Macintosh users

a Customize the settings in the Page Setup dialog:

1 With a document open, choose File > Page Setup. 2 Choose a paper size or create a custom size to match the paper loaded. 3 Click OK. b Customize the settings in the Print dialog:

1 With a document open, choose File > Print. If necessary, click the disclosure triangle to see more options. 2 From the print options pop‑up menus, adjust the settings, if necessary.

Printing in black and white

From the home screen, navigate to:

> Settings > Print Settings > Quality Menu > Print Mode > Black Only >

Adjusting toner darkness

1 From the home screen, navigate to:

> Settings > Print Settings > Quality Menu

2 Adjust the toner darkness setting, and then save the changes.

Printing 74

Page 75 of the Lexmark C 790 user manual — Printing from a flash drive
Page 75 · click to enlarge
Page 75

Printing from a flash drive or mobile device

Printing from a flash drive

  • Before printing an encrypted PDF file, enter the file password from the printer control panel.
  • You cannot print files for which you do not have printing permissions.

1 Insert a flash drive into the USB port.

Lexmark C 790 — Printing from a flash drive diagram (page 75)
Fig. 68 · Printing from a flash drive
  • If you insert the flash drive when the printer requires attention, such as when a jam has occurred, then the printer ignores the flash drive.
  • If you insert the flash drive while the printer is processing other print jobs, then Busy appears. After these print jobs are processed, you may need to view the held jobs list to print documents from the flash drive.
Lexmark C 790 — Printing from a flash drive diagram (page 75)
Fig. 69 · Printing from a flash drive

2 From the printer control panel, touch the document you want to print.

Printing 75

Page 76 of the Lexmark C 790 user manual — Tips on using letterhead
Page 76 · click to enlarge
Page 76

3 Touch the arrows to increase the number of copies to print, and then touch Print.

  • Do not remove the flash drive from the USB port until the document has finished printing.
  • If you leave the flash drive in the printer after leaving the initial USB menu screen, then you can still print files from the flash drive as held jobs.

Supported flash drives and file types

Flash drive File type

Documents:

  • Lexar JumpDrive 2.0 Pro (256MB, 512MB, or 1GB sizes)
  • SanDisk Cruzer Mini (256MB, 512MB, or 1GB sizes)
  • .pdf
  • .xps

Images:

  • Hi ‑ Speed USB flash drives must support the Full ‑ Speed standard. Devices supporting only USB low ‑ speed capabilities are not supported.
  • USB flash drives must support the FAT ( File Allocation Tables ) system. Devices formatted with NTFS ( New Technology File System ) or any other file system are not supported.
  • .dcx
  • .gif
  • .JPEG
  • .jpg
  • .bmp
  • .pcx
  • .TIFF
  • .tif
  • .png

Printing from a mobile device

To download a compatible mobile printing application, visit www.lexmark.com/mobile.

Printing specialty documents

Tips on using letterhead

  • Use letterhead designed specifically for laser printers.
  • Print samples on the letterhead being considered for use before buying large quantities.
  • Before loading letterhead, flex the sheets to prevent them from sticking together.
  • Observe proper page orientation.

Printing 76

Page 77 of the Lexmark C 790 user manual — Tips on using envelopes
Page 77 · click to enlarge
Page 77

Source Print side Paper orientation

– Standard 550‑sheet tray – Optional 550‑sheet tray – Optional 2000‑sheet

Preprinted letterhead design is placed faceup.

The top edge of the sheet with the logo is placed at the left side of the tray.

high‑capacity feeder

Duplex (two‑sided) printing from trays

Preprinted letterhead design is placed facedown.

The top edge of the sheet with the logo is placed at the right side of the tray.

Multipurpose feeder (simplex printing)

Preprinted letterhead design is placed facedown.

The top edge of the sheet with the logo should enter the multipurpose feeder first.

Multipurpose feeder (duplex printing)

Preprinted letterhead design is placed faceup.

The top edge of the sheet with the logo should enter the multipurpose feeder last.

Tips on using transparencies

  • Print a test page on the transparencies being considered for use before buying large quantities.
  • Feed transparencies from the multipurpose feeder only.
  • From the Paper menu, set the MP Feeder Type to Transparency.
  • Use transparencies designed specifically for laser printers. Transparencies must be able to withstand temperatures of 230°C (446°F) without melting, discoloring, offsetting, or releasing hazardous emissions.
  • To prevent print quality problems, avoid getting fingerprints on the transparencies.
  • Before loading transparencies, flex the stack to prevent sheets from sticking together.
  • We recommend Lexmark transparencies. For ordering information, see the Lexmark Web site at <a href="http://www.lexmark.com" rel="nofollow noopener" target="_blank">www.lexmark.com</a> .

Tips on using envelopes

Print samples on the envelopes being considered for use before buying large quantities.

  • Use envelopes designed specifically for laser printers. Check with the manufacturer or vendor to ensure that the envelopes can withstand temperatures up to 220°C (446°F) without sealing, wrinkling, curling excessively, or releasing hazardous emissions.
  • For best performance, use envelopes made from 90 ‑ g/m 2 (24 ‑ lb bond) paper or 25% cotton. All ‑ cotton envelopes must not exceed 70 ‑ g/m 2 (20 ‑ lb bond) weight.
  • Use only new envelopes from undamaged packages.
  • To optimize performance and minimize jams, do not use envelopes that: – Have excessive curl or twist. – Are stuck together or damaged in any way. – Have windows, holes, perforations, cutouts, or embossing. – Have metal clasps, string ties, or folding bars. – Have an interlocking design.

Printing 77

Page 78 of the Lexmark C 790 user manual — Tips on using card stock
Page 78 · click to enlarge
Page 78

– Have postage stamps attached. – Have any exposed adhesive when the flap is in the sealed or closed position. – Have bent corners. – Have rough, cockle, or laid finishes. • Adjust the width guides to fit the width of the envelopes.

Tips on using labels

For detailed information on label printing, characteristics, and design, see the Card Stock & Label Guide available on the Lexmark Web site at http://support.lexmark.com.

When printing on labels:

  • Use labels designed specifically for laser/LED printers. Check with the manufacturer or vendor to verify that: – The labels can withstand temperatures up to 210°C (410°F) without sealing, excessive curling, wrinkling, or

releasing hazardous emissions.

  • delaminating, oozing around the edges, or releasing hazardous fumes.
  • Do not use labels with slick backing material.
  • Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a jam. Partial sheets also contaminate the printer and the cartridge with adhesive, and could void the printer and cartridge warranties.
  • Do not use labels with exposed adhesive.
  • Do not print within 1 mm (0.04 in.) of the edge of the label, of the perforations, or between die ‑ cuts of the label.
  • Be sure adhesive backing does not reach to the sheet edge. Zone coating of the adhesive at least 1 mm (0.04 in.) away from edges is recommended. Adhesive material contaminates the printer and could void the warranty.
  • If zone coating of the adhesive is not possible, remove a 1.6 mm (0.06 in.) strip on the leading and driver edge, and use a non ‑ oozing adhesive.
  • Portrait orientation works best, especially when printing bar codes.

Tips on using card stock

Card stock is heavy, single‑ply specialty media. Many of its variable characteristics, such as moisture content, thickness, and texture, can significantly impact print quality. Print samples on the card stock being considered for use before buying large quantities.

  • From the Paper menu, set the Paper Type to Card Stock.
  • Select the appropriate Paper Texture setting.
  • Be aware that preprinting, perforation, and creasing may significantly affect the print quality and cause jams or other paper handling problems.
  • Check with the manufacturer or vendor to ensure the card stock can withstand temperatures up to 220°C (446°F) without releasing hazardous emissions.

Printing 78

Page 79 of the Lexmark C 790 user manual — For Windows users
Page 79 · click to enlarge
Page 79
  • Do not use preprinted card stock manufactured with chemicals that may contaminate the printer. Preprinting introduces semi ‑ liquid and volatile components into the printer.
  • Use grain short card stock when possible.

Printing confidential and other held jobs

Storing print jobs in the printer

You can set the printer to store print jobs in the printer memory until you start the print job from the printer control panel.

All print jobs that can be initiated by the user at the printer are called held jobs.

Print job type Description

Confidential Confidential lets you hold print jobs in the computer until you enter the PIN from the control panel.

Verify Verify lets you print one copy of a print job while the printer holds the remaining copies. It allows you to examine if the first copy is satisfactory. The print job is automatically deleted from the printer memory once all copies are printed.

Reserve Reserve allows the printer to store print jobs for printing at a later time. The print jobs are held until deleted from the Help Jobs menu.

Repeat Repeat prints and stores print jobs in the printer memory for reprinting.

Printing confidential and other held jobs

For Windows users

1 With a document open, click File > Print.

2 Click Properties, Preferences, Options, or Setup.

3 Click Print and Hold.

4 Select the print job type (Confidential, Repeat, Reserve, or Verify), and then assign a user name. For a confidential print job, also enter a four‑digit PIN.

5 Click OK or Print.

Printing 79

Page 80 of the Lexmark C 790 user manual — Printing a directory list
Page 80 · click to enlarge
Page 80
  • 6 From the printer home screen, release the print job.
  • For confidential print jobs, navigate to: Held jobs > select your user name > Confidential Jobs > enter the PIN > Print
  • For other print jobs, navigate to: Held jobs > select your user name > select the print job > specify the number of copies > Print

For Macintosh users

1 With a document open, choose File > Print.

If necessary, click the disclosure triangle to see more options.

2 From the print options or Copies & Pages pop‑up menu, choose Job Routing.

3 Select the print job type (Confidential, Repeat, Reserve, or Verify), and then assign a user name. For a confidential print job, also enter a four‑digit PIN.

4 Click OK or Print.

  • 5 From the printer home screen, release the print job.
  • For confidential print jobs, navigate to: Held jobs > select your user name > Confidential Jobs > enter the PIN > Print
  • For other print jobs, navigate to: Held jobs > select your user name > select the print job > specify the number of copies > Print

Printing information pages

Printing a font sample list

1 From the home screen, navigate to:

> Reports > Print Fonts

2 Touch PCL Fonts or PostScript Fonts.

Printing a directory list

A directory list shows the resources stored in a flash memory or on the printer hard disk.

From the home screen, navigate to:

> Reports > Print Directory

Printing 80

Page 81 of the Lexmark C 790 user manual — For Macintosh users
Page 81 · click to enlarge
Page 81

Canceling a print job

Canceling a print job from the printer control panel

1 From the printer control panel, touch Cancel Job or press

on the keypad.

2 Touch the print job you want to cancel, and then touch Delete Selected Jobs.

on the keypad, then touch Resume to return to the home screen.

Canceling a print job from the computer

For Windows users

1 Open the printers folder, and then select your printer.

2 From the print queue, select the print job you want to cancel, and then delete it.

For Macintosh users

1 From System Preferences in the Apple menu, navigate to your printer.

2 From the print queue, select the print job you want to cancel, and then delete it.

Printing 81

Page 82 of the Lexmark C 790 user manual — Understanding the printer menus
Page 82 · click to enlarge
Page 82

Understanding the printer menus 82

Understanding the printer menus

Menus list

Supplies Paper Menu Reports Settings

Cyan Cartridge Magenta Cartridge

Default Source Paper Size/Type

Menu Settings Page Device Statistics

General Settings Flash Drive Menu

Network [x] Setup Page

Custom Names Custom Bin Names

XPS Menu PDF Menu

Standard Network or Network [x]*

Erase Temporary Data Files

Set Date and Time

Information Guide Connection Guide

* Depending on the printer setup, this menu appears as Standard Network, Network [x], or Wireless Network.

Show 48 more labels / short text on this page
Yellow Cartridge · Configure MP · Network Setup Page · Print Settings · Black Cartridge · Substitute Size · Setup Menu · Waste Toner Bottle · Paper Texture · Profiles List · Finishing Menu · Fuser · Paper Weight · Print Fonts · Quality Menu · Transfer Module · Paper Loading · Print Directory · Job Accounting Menu · Staples · Custom Types · Asset Report · Utilities Menu · Hole Punch Box · Universal Setup · PostScript Menu · Bin Setup · PCL Emul Menu · HTML Menu · Image Menu · Security Network/Ports Help · Miscellaneous Security Settings · Active NIC · Print All Guides · Confidential Print · Color Quality · Standard USB · Print Quality · Security Audit Log · Parallel [x] · Printing Guide · Serial [x] · Media Guide · SMTP Setup · Print Defects Guide · Menu Map · Moving Guide · Supplies Guide
Page 83 of the Lexmark C 790 user manual — Supplies menu
Page 83 · click to enlarge
Page 83

Understanding the printer menus 83

Supplies menu

Shows the status of the cyan print cartridge

Early Warning Invalid Critically Low Missing Defective OK Unsupported

Shows the status of the magenta print cartridge

Early Warning Invalid Critically Low Missing Defective OK Unsupported

Shows the status of the yellow print cartridge

Early Warning Invalid Critically Low Missing Defective OK Unsupported

Shows the status of the black print cartridge

Early Warning Invalid Critically Low Missing Defective OK Unsupported

Shows the status of the waste toner bottle

Near Full Replace Missing OK

Show 6 more labels / short text on this page
Menu item Description · Cyan Cartridge · Magenta Cartridge · Yellow Cartridge · Black Cartridge · Waste Toner Bottle
Page 84 of the Lexmark C 790 user manual — Default Source menu
Page 84 · click to enlarge
Page 84

Understanding the printer menus 84

Shows the status of the fuser

Early Warning Low Replace Missing OK

Shows the status of the transfer module

Early Warning Low Replace Missing OK

Shows the status of the staple cartridge

Early Warning Low Replace Missing OK

Shows the status of the hole punch box

Near Full Replace Missing OK

Paper menu

Default Source menu

Sets a default paper source for all print jobs

Tray [x] MP Feeder Manual Paper Manual Envelope

  • Tray 1 (standard tray) is the factory default setting.
  • From the Paper menu, Configure MP feeder must be set to Cassette for MP feeder to appear as a menu setting.
  • If the same size and type of paper are in two trays and the Paper Size and Paper Type settings match, then the trays are automatically linked. When one tray is empty, the print job continues using the linked tray.
Show 7 more labels / short text on this page
Menu item Description · Fuser · Transfer module · Staple Cartridge · Hole Punch Box · Menu item Description · Default Source
Page 85 of the Lexmark C 790 user manual — Paper Size/Type menu
Page 85 · click to enlarge
Page 85

Understanding the printer menus 85

Paper Size/Type menu

Specifies the paper size loaded in each tray

Letter Legal Executive Oficio (Mexico) Folio Statement Universal A4 A5 JIS B5

  • Letter is the US factory default setting. A4 is the international factory default setting.
  • For trays with automatic size sensing, only the size detected by the hardware appears.
  • If the same size and type of paper are in two trays and the Paper Size and Paper Type settings match, then the trays are automatically linked. When one tray is empty, the print job uses the linked tray.

Specifies the type of paper loaded in each tray

Plain Paper Card Stock Transparency Recycled Glossy Heavy Glossy Labels Vinyl Labels Bond Letterhead Preprinted Colored Paper Light Paper Heavy Paper Rough/Cotton Paper Custom Type [x]

  • Plain Paper is the factory default setting for Tray 1. Custom Type [x] is the factory default setting for all other trays.
  • If available, a user ‑ defined name will appear instead of Custom Type [x].
  • Use this menu item to configure automatic tray linking.

Menu item Description · Tray [x] Size · Tray [x] Type

Page 86 of the Lexmark C 790 user manual — Paper Size/Type menu
Page 86 · click to enlarge
Page 86

Understanding the printer menus 86

Specifies the paper size loaded in the multipurpose feeder

Letter Legal Executive Oficio (Mexico) Folio Statement Universal 7 3/4 Envelope 9 Envelope 10 Envelope DL Envelope C5 Envelope B5 Envelope Other Envelope A4 A5 A6 JIS B5

  • Letter is the US factory default setting. A4 is the international factory default setting.
  • From the Paper menu, Configure MP Feeder must be set to Cassette for MP Feeder to appear as a menu item.

Specifies the type of paper loaded in the multipurpose feeder

Custom Type [x] Plain Paper Card Stock Transparency Recycled Glossy Heavy Glossy Labels Vinyl Labels Bond Envelope Rough Envelope Letterhead Preprinted Colored Paper Light Paper Heavy Paper Rough/Cotton Paper

  • Custom Type [x] is the factory default setting.
  • From the Paper menu, Configure MP Feeder must be set to Cassette for MP Feeder to appear as a menu item.

Menu item Description · MP Feeder Size · MP Feeder Type

Page 87 of the Lexmark C 790 user manual — Paper Size/Type menu
Page 87 · click to enlarge
Page 87

Understanding the printer menus 87

Specifies the size of the paper being manually loaded

Letter Legal Executive Oficio (Mexico) Folio Statement Universal A4 A5 A6 JIS B5

Specifies the type of paper being manually loaded

Plain Paper Card Stock Transparency Recycled Glossy Heavy Glossy Labels Vinyl Labels Bond Letterhead Preprinted Colored Paper Light Paper Heavy Paper Rough/Cotton Paper Custom Type [x]

Specifies the size of the envelope being manually loaded

10 Envelope DL Envelope C5 Envelope B5 Envelope Other Envelope 7 3/4 Envelope 9 Envelope

Specifies the type of envelope being manually loaded

Envelope Rough Envelope Custom Type [x]

Show 5 more labels / short text on this page
Menu item Description · Manual Paper Size · Manual Paper Type · Manual Envelope Size · Manual Envelope Type
Page 88 of the Lexmark C 790 user manual — Paper Texture menu
Page 88 · click to enlarge
Page 88

Understanding the printer menus 88

Configure MP menu

Determines when the printer selects paper from the multipurpose feeder

  • Cassette is the factory default setting. Cassette configures the multipurpose feeder as the automatic paper source.
  • Manual sets the multipurpose feeder only for manual feed print jobs.
  • First configures the multipurpose feeder as the primary paper source.

Substitute Size menu

Substitutes a specified paper size if the requested paper size is not available

All Listed Off Statement/A5 Letter/A4

  • All Listed is the factory default setting. All available size substitutions are allowed.
  • Off indicates no size substitutions are allowed.
  • Setting a size substitution lets a print job continue without a Change Paper message appearing.

Paper Texture menu

Specifies the relative texture of the plain paper loaded

Specifies the relative texture of the card stock loaded

  • Normal is the factory default setting.
  • Settings appear only if card stock is supported.

Specifies the relative texture of the transparencies loaded

Specifies the relative texture of the recycled paper loaded

Show 14 more labels / short text on this page
Menu item Description · Configure MP · Cassette Manual First · Menu item Description · Substitute Size · Menu item Description · Plain Texture · Normal Rough Smooth · Card Stock Texture · Normal Rough Smooth · Transparency Texture · Normal Rough Smooth · Recycled Texture · Normal Rough Smooth
Page 89 of the Lexmark C 790 user manual — Configure MP menu
Page 89 · click to enlarge
Page 89

Understanding the printer menus 89

Specifies the relative texture of the glossy paper loaded

Specifies the relative texture of the glossy paper loaded

Specifies the relative texture of the labels loaded

Specifies the relative texture of the vinyl labels loaded

Specifies the relative texture of the bond paper loaded

Specifies the relative texture of the envelopes loaded

Specifies the relative texture of the envelopes loaded

Specifies the relative texture of the letterhead loaded

Specifies the relative texture of the preprinted paper loaded

Specifies the relative texture of the colored paper loaded

Specifies the relative texture of the paper loaded

Show 23 more labels / short text on this page
Menu item Description · Glossy Texture · Normal Rough Smooth · Heavy Glossy Texture · Normal Rough Smooth · Labels Texture · Normal Rough Smooth · Vinyl Labels Texture · Normal Rough Smooth · Bond Texture · Rough Smooth Normal · Envelope Texture · Normal Rough Smooth · Rough Envelope Texture · Rough · Letterhead Texture · Normal Rough Smooth · Preprinted Texture · Normal Rough Smooth · Colored Texture · Normal Rough Smooth · Light Texture · Normal Rough Smooth
Page 90 of the Lexmark C 790 user manual — Paper Weight menu
Page 90 · click to enlarge
Page 90

Understanding the printer menus 90

Specifies the relative texture of the paper loaded

Specifies the relative texture of the cotton paper loaded

Specifies the relative texture of the custom paper loaded

  • Normal is the factory default setting.
  • Settings appear only if the custom type is supported.

Paper Weight menu

Specifies the relative weight of the plain paper loaded

Specifies the relative weight of the card stock loaded

  • Normal is the factory default setting.
  • Settings appear only if card stock is supported.

Specifies the relative weight of the transparencies loaded

Specifies the relative weight of the recycled paper loaded

Specifies the relative weight of the glossy paper loaded

Specifies the relative weight of the glossy paper loaded

Specifies the relative weight of the labels loaded

Show 22 more labels / short text on this page
Menu item Description · Heavy Texture · Normal Rough Smooth · Rough/Cotton Texture · Rough · Custom [x] Texture · Normal Rough Smooth · Menu item Description · Plain Weight · Normal Heavy Light · Card Stock Weight · Normal Heavy Light · Transparency Weight · Normal Heavy Light · Recycled Weight · Normal Heavy Light · Glossy Weight · Normal Heavy Light · Heavy Glossy Weight · Heavy · Labels Weight · Normal Heavy Light
Page 91 of the Lexmark C 790 user manual — Paper Weight menu
Page 91 · click to enlarge
Page 91

Understanding the printer menus 91

Specifies the relative weight of vinyl labels loaded

Specifies the relative weight of the bond paper loaded

Specifies the relative weight of the envelopes loaded

Specifies the relative weight of the envelopes loaded

Specifies the relative weight of the letterhead loaded

Specifies the relative weight of the preprinted paper loaded

Specifies the relative weight of the colored paper loaded

Specifies the relative weight of the paper loaded

Specifies the relative weight of the paper loaded

Specifies the relative weight of the cotton paper loaded

Specifies the relative weight of the custom paper loaded

  • Normal is the factory default setting.
  • Settings appear only if the custom type is supported.
Show 23 more labels / short text on this page
Menu item Description · Vinyl Labels Weight · Normal Heavy Light · Bond Weight · Normal Heavy Light · Envelope Weight · Normal Heavy Light · Rough Envelope Weight · Heavy Light Normal · Letterhead Weight · Normal Heavy Light · Preprinted Weight · Normal Heavy Light · Colored Weight · Normal Heavy Light · Light Weight · Light · Heavy Weight · Heavy · Rough/Cotton Weight · Normal Heavy Light · Custom [x] Weight · Normal Heavy Light
Page 92 of the Lexmark C 790 user manual — Paper Loading menu
Page 92 · click to enlarge
Page 92

Understanding the printer menus 92

Paper Loading menu

Determines whether 2‑sided printing occurs for all print jobs that specify Card Stock as the paper type

Determines whether 2‑sided printing occurs for all print jobs that specify Recycled as the paper type

Determines whether 2‑sided printing occurs for all print jobs that specify Glossy as the paper type

Determines whether 2‑sided printing occurs for all print jobs that specify Heavy Glossy as the paper type

Determines whether 2‑sided printing occurs for all print jobs that specify Labels as the paper type

Determines whether 2‑sided printing occurs for all print jobs that specify Vinyl Labels as the paper type

Determines whether 2‑sided printing occurs for all print jobs that specify Bond as the paper type

Determines whether 2‑sided printing occurs for all print jobs that specify Letterhead as the paper type

Determines whether 2‑sided printing occurs for all print jobs that specify Preprinted as the paper type

Determines whether 2‑sided printing occurs for all print jobs that specify Colored as the paper type

Determines whether 2‑sided printing occurs for all print jobs that specify Light as the paper type

  • Duplex sets the printer default to 2 ‑ sided printing for every print job unless 1 ‑ sided printing is selected from Print Properties.
  • If Duplex is selected, then all print jobs are sent through the duplex unit, including 1 ‑ sided print jobs.
Show 23 more labels / short text on this page
Menu item Description · Card Stock Loading · Off Duplex · Recycled Loading · Off Duplex · Glossy Loading · Off Duplex · Heavy Glossy Loading · Off Duplex · Labels Loading · Off Duplex · Vinyl Labels Loading · Off Duplex · Bond Loading · Off Duplex · Letterhead Loading · Off Duplex · Preprinted Loading · Off Duplex · Colored Loading · Off Duplex · Light Loading · Off Duplex
Page 93 of the Lexmark C 790 user manual — Custom Types menu
Page 93 · click to enlarge
Page 93

Understanding the printer menus 93

Determines whether 2‑sided printing occurs for all print jobs that specify Heavy as the paper type

Determines whether 2‑sided printing occurs for all print jobs that specify Rough or Cotton as the paper type

Determines whether 2‑sided printing occurs for all print jobs that specify Custom [x] as the paper type

  • Off is the factory default setting.
  • Custom [x] Loading is available only if the custom paper type is supported.
  • Duplex sets the printer default to 2 ‑ sided printing for every print job unless 1 ‑ sided printing is selected from Print Properties.
  • If Duplex is selected, then all print jobs are sent through the duplex unit, including 1 ‑ sided print jobs.

Custom Types menu

Associates a paper or specialty media type with a factory default Custom Type [x] name or a user‑defined Custom Name created from the Embedded Web Server or from MarkVisionTM Professional

Paper Card Stock Transparency Glossy Rough/Cotton Labels Vinyl Labels Envelope

  • Paper is the factory default setting.
  • The custom media type must be supported by the selected tray or multipurpose feeder in order to print from that source.

Specifies a paper type when the Recycled setting is selected in other menus

Paper Card Stock Transparency Glossy Rough/Cotton Labels Vinyl Labels Envelope

  • Paper is the factory default setting.
  • The custom media type must be supported by the selected tray or multipurpose feeder in order to print from that source.
Show 10 more labels / short text on this page
Menu item Description · Heavy Loading · Off Duplex · Rough/Cotton Loading · Off Duplex · Custom [x] Loading · Off Duplex · Menu item Description · Custom Type [x] · Recycled
Page 94 of the Lexmark C 790 user manual — Universal Setup menu
Page 94 · click to enlarge
Page 94

Understanding the printer menus 94

Custom Names menu

Specify a custom name for a paper type. This name replaces the Custom Type [x] name in the printer menus.

Custom Bin Names menu

Standard Bin Specifies a custom name for the Standard Bin

Bin [x] Specifies a custom name for Bin [x]

Universal Setup menu

These menu items are used to specify the height and width of the Universal paper size. The Universal paper size is a user‑defined paper size setting. It is listed with the other paper size settings and includes similar options, such as support for duplex printing and printing multiple pages on one sheet.

Identifies the unit of measure

Sets the portrait width

3–48 inches 76–1219 mm

  • If the width exceeds the maximum, then the printer uses the maximum width allowed.
  • 8.5 inches is the US factory default setting. 216 mm is the international factory default setting.
  • The width can be increased in 0.01 ‑ inch or in 1 ‑ mm increments.

Sets the portrait height

3–48 inches 76–1219 mm

  • If the height exceeds the maximum, then the printer uses the maximum height allowed.
  • 14 inches is the US factory default setting. 356 mm is the international factory default setting.
  • The height can be increased in 0.01 ‑ inch or in 1 ‑ mm increments.

Specifies the feed direction

Short Edge Long Edge

  • Short Edge is the factory default setting.
  • Long Edge appears only if the longest edge is shorter than the maximum width supported in the tray.
Show 10 more labels / short text on this page
Menu item Definition · Custom Name [x] · [none] · Menu Item Description · Menu item Description · Units of Measure · Inches Millimeters · Portrait Width · Portrait Height · Feed Direction
Page 95 of the Lexmark C 790 user manual — Bin Setup menu
Page 95 · click to enlarge
Page 95

Understanding the printer menus 95

Bin Setup menu

Specifies the default exit bin

Standard Bin Bin [x]

Specifies configuration options for exit bins

Mailbox Link Mail Overflow Link Optional Type Assignment

  • Mailbox is the factory default setting. This setting treats each bin as a separate mailbox.
  • Link configures all available bins as one large exit bin.
  • Mail Overflow assigns an overflow bin when the mailbox bins become full.
  • Link Optional links together all available exit bins except the standard bin and only appears when at least two optional bins are installed.
  • Type Assignment assigns each paper type to an exit bin or linked bin set.
  • Bins assigned the same name are automatically linked unless Link Optional is selected.

Specifies an alternate exit bin when a designated bin is full

Standard Bin Bin [x]

Selects an exit bin for each supported paper type

Plain Paper Bin Card Stock Bin Transparency Bin Recycled Bin Glossy Bin Heavy Glossy Bin Labels Bin Vinyl Labels Bin Bond Bin Envelope Bin Rough Envelope Bin Letterhead Bin Preprinted Bin Colored Bin Light Paper Bin Heavy Paper Bin Rough/Cotton Bin Custom [x] Bin

Select from the following options for each type:

Disabled Standard Bin Bin [x]

Show 5 more labels / short text on this page
Menu item Description · Output Bin · Configure Bins · Overflow Bin · Assign Type/Bin
Page 96 of the Lexmark C 790 user manual — Reports menu
Page 96 · click to enlarge
Page 96

Understanding the printer menus 96

Reports menu

Reports menu

Menu Settings Page Print a report containing information about paper loaded in trays, installed memory, the total page count, alarms, timeouts, the printer control panel language, the TCP/IP address, the status of supplies, the status of the network connection, and other information.

Device Statistics Print a report containing printer statistics such as supply information and details about printed pages.

Network Setup Page Print a report containing information about the network printer settings, such as the TCP/IP address.

Network [x] Setup Page Print a report containing information on network printer settings, such as the TCP/IP address information.

  • This menu item is available only when more than one network option is installed.
  • This menu item appears only in network printers or in printers connected to print servers.

Profiles List Print a list of profiles stored in the printer.

Print a report in English of all the fonts available for the printer language currently set in the printer.

PCL Fonts PostScript Fonts

Print demo files that are available in the RIP code, the flash option, and the disk option.

Demo Page [list of available demo pages]

Asset Report Print a report containing asset information including the printer serial number and model name. The report contains text and UPC bar codes that can be scanned into an asset database.

Use To · Print Fonts · Print Demo

Page 97 of the Lexmark C 790 user manual — Standard Network or Network [x] menus
Page 97 · click to enlarge
Page 97

Understanding the printer menus 97

Network/Ports menu

Active NIC menu

Auto [list of available network cards]

  • Auto is the factory default setting.
  • This menu item appears only if an optional network card is installed.

Standard Network or Network [x] menus

Sets the printer to automatically switch to PCL emulation when a print job requires it, regardless of the default printer language

  • On is the factory default setting.
  • When Off is used, the printer does not examine incoming data. The printer uses PostScript emulation if PS SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if PS SmartSwitch is set to Off.

Sets the printer to automatically switch to PS emulation when a print job requires it, regardless of the default printer language

  • On is the factory default setting.
  • When Off is used, the printer does not examine incoming data. The printer uses PCL emulation if PCL SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if PCL SmartSwitch is set to Off.

Sets the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol

  • Auto is the factory default setting.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is then updated.
Show 9 more labels / short text on this page
Menu item Description · Active NIC · Menu item Description · PCL SmartSwitch · On Off · PS SmartSwitch · On Off · NPA Mode · Auto Off
Page 98 of the Lexmark C 790 user manual — Network/Ports menu
Page 98 · click to enlarge
Page 98

Understanding the printer menus 98

Sets the size of the network input buffer

Auto 3KB to [maximum size allowed]

  • Auto is the factory default setting.
  • The value can be changed in 1 ‑ KB increments.
  • The maximum size allowed depends on the amount of memory in the printer, the size of the other link buffers, and whether Resource Save is set to On or Off.
  • To increase the maximum size range for the Network Buffer, disable or reduce the size of the parallel, serial, and USB buffers.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is then updated.

Temporarily stores print jobs on the printer hard disk before printing. This menu only appears if a formatted disk is installed.

  • Off is the factory default setting.
  • On buffers print jobs on the printer hard disk.
  • Auto buffers print jobs only if the printer is busy processing data from another input port.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is then updated.

Sets the printer to process Macintosh binary PostScript print jobs

  • Auto is the factory default setting.
  • Off filters print jobs using the standard protocol.
  • On processes raw binary PostScript print jobs.

Displays and sets the printer network settings.

Reports Network Card TCP/IP IPv6 Wireless AppleTalk

Reports Network Card TCP/IP IPv6 Wireless AppleTalk

Show 8 more labels / short text on this page
Menu item Description · Network Buffer · Job Buffering · Off On Auto · Mac Binary PS · Auto On Off · Standard Network Setup · Network [x] Setup
Page 99 of the Lexmark C 790 user manual — TCP/IP menu
Page 99 · click to enlarge
Page 99

Understanding the printer menus 99

Network Reports menu

This menu is available from the Network/Ports menu:

Network/Ports > Standard Network or Network [x] > Standard Network Setup or Network [x] Setup > Reports or Network Reports

Print Setup Page Prints a report containing information about the network printer settings, such as the TCP/IP address

Network Card menu

This menu is available from the Network/Ports menu:

Network/Ports > Standard Network or Network [x] > Standard Network Setup or Network [x] Setup > Network Card

Lets you view the connection status of the Network Card

View Card Speed Lets you view the speed of a currently active network card

Lets you view the network addresses

UAA LAA

Sets the amount of time in seconds before a network print job is canceled

Allows the printer to print a banner page

TCP/IP menu

This menu is available from the Network/Ports menu:

Network/Ports > Standard Network or Network [x] > Standard Network Setup or Network [x] Setup > TCP/IP

Set Hostname Lets you set the current TCP/IP hostname

Show 13 more labels / short text on this page
Menu item Description · Menu item Description · View Card Status · Connected Disconnected · Network Address · Job Timeout · Banner Page · Off · On · Menu item Description · Activate · Activates TCP/IP · On Off
Page 100 of the Lexmark C 790 user manual — IPv6 menu
Page 100 · click to enlarge
Page 100

Understanding the printer menus 100

IP Address Lets you view or change the current TCP/IP address

Netmask Lets you view or change the current TCP/IP netmask

Gateway Lets you view or change the current TCP/IP gateway

Specifies the DHCP address and parameter assignment setting

Specifies the RARP address assignment setting

Specifies the BOOTP address assignment setting

Specifies the Zero Configuration Networking setting

Enables the built-in FTP server, which allows you to send files to the printer using File Transfer Protocol.

Enables the built-in web server (Embedded Web Server). When enabled, the printer can be monitored and managed remotely using a web browser.

WINS Server Address Lets you view or change the current WINS server address

Lets you view or change the current DDNS setting

Lets you view or change the current mDNS setting

DNS Server Address Lets you view or change the current DNS server address

Lets you view or change the current HTTPS setting

IPv6 menu

To access the menu, navigate to any of the following:

  • Network/Ports menu > Standard Network > Standard Network Setup > IPv6
  • Network/Ports menu > Network [x] > Network [x] Setup > IPv6
Show 19 more labels / short text on this page
Menu item Description · Enable DHCP · On Off · Enable RARP · On Off · Enable BOOTP · On Off · Enable AutoIP · Yes No · Enable FTP/TFTP · Yes No · Enable HTTP Server · Yes No · Enable DDNS · Yes No · Enable mDNS · Yes No · Enable HTTPS · Yes No
Page 101 of the Lexmark C 790 user manual — Wireless menu
Page 101 · click to enlarge
Page 101

Understanding the printer menus 101

Enable IPv6 in the printer.

Specify whether or not the network adapter accepts the automatic IPv6 address configuration entries provided by a router.

Set Hostname Set the host name.

Enable DHCPv6 in the printer.

Wireless menu

Use the following menu items to view or configure the wireless internal print server settings.

The Wireless menu is available from the Network/Ports menu:

Network/Ports > Standard Network or Network [x] > Standard Network Setup or Network [x] Setup > Wireless

WPS PBC Mode Lets you connect the printer to a wireless network by pressing buttons on both the printer and the access point (wireless router) within a given period of time

WPS PIN Mode Lets you connect the printer to a wireless network by using a PIN on the printer and entering it into the wireless settings of the access point

Automatically detects the connection method that an access point with WPS uses— WPS Push Button Configuration (PBC) or WPS Personal Identification Number (PIN)

Specifies the network mode

  • Ad hoc is the factory default setting. This configures wireless connection directly between the printer and a computer.
  • Infrastructure lets the printer access a network using an access point.

Specifies the wireless standard for the wireless network

802.11b/g/n 802.11n 802.11b/g

Show 14 more labels / short text on this page
Use To · Enable IPv6 · On Off · Auto Configuration · On Off · View Router Address · Enable DHCPv6 · On Off · Menu item Description · WPS Auto Detect · Disable Enable · Network Mode · Ad hoc Infrastructure · Compatibility
Page 102 of the Lexmark C 790 user manual — Standard USB menu
Page 102 · click to enlarge
Page 102

Understanding the printer menus 102

Lets you select an available network for the printer to use

[list of available networks]

View Signal Quality Lets you view the quality of the wireless connection

View Security Mode Lets you view the encryption method that a wireless network uses

AppleTalk menu

To access the menu, navigate to either of the following:

  • Network/Ports > Standard Network > Standard Network Setup > AppleTalk
  • Network/Ports > Network [x] > Network [x] Setup > AppleTalk

Enable or disable AppleTalk support.

View Name Show the assigned AppleTalk name.

View Address Show the assigned AppleTalk address.

Provide a list of AppleTalk zones available on the network.

[list of zones available on the network]

Standard USB menu

Sets the printer to automatically switch to PCL emulation when a print job received through a USB port requires it, regardless of the default printer language

  • On is the factory default setting.
  • When set to Off, the printer does not examine incoming data. The printer uses PostScript emulation if the PS SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if the PS SmartSwitch is set to Off.
Show 9 more labels / short text on this page
Menu item Description · Choose Network · Use To · Activate · Yes No · Set Zone · Menu item Description · PCL SmartSwitch · On Off
Page 103 of the Lexmark C 790 user manual — AppleTalk menu
Page 103 · click to enlarge
Page 103

Understanding the printer menus 103

Sets the printer to automatically switch to PS emulation when a print job received through a USB port requires it, regardless of the default printer language

  • On is the factory default setting.
  • When set to Off, the printer does not examine incoming data. The printer uses PCL emulation if the PCL SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if the PCL SmartSwitch is set to Off.

Sets the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol

  • Auto is the factory default setting. Auto sets the printer to examine data, determine the format, and then process it appropriately.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is then updated.

Sets the size of the USB input buffer

Auto 3KB to [maximum size allowed] Disabled

  • Auto is the factory default setting.
  • Disabled turns off job buffering. Any jobs already buffered on the printer hard disk are printed before normal processing resumes.
  • The USB buffer size value can be changed in 1-KB increments.
  • The maximum size allowed depends on the amount of memory in the printer, the size of the other link buffers, and whether Resource Save is set to On or Off.
  • To increase the maximum size range for the USB Buffer, disable or reduce the size of the parallel, serial, and network buffers.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is then updated.

Temporarily stores print jobs on the printer hard disk before printing

  • Off is the factory default setting.
  • On buffers jobs on the printer hard disk.
  • Auto buffers print jobs only if the printer is busy processing data from another input port.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is then updated.

Sets the printer to process Macintosh binary PostScript print jobs

  • Auto is the factory default setting.
  • On processes raw binary PostScript print jobs.
  • Off filters print jobs using the standard protocol.
Show 10 more labels / short text on this page
Menu item Description · PS SmartSwitch · On Off · NPA Mode · Auto On Off · USB Buffer · Job Buffering · Off On Auto · Mac Binary PS · Auto On Off
Page 104 of the Lexmark C 790 user manual — Parallel [x] menu
Page 104 · click to enlarge
Page 104

Understanding the printer menus 104

Sets the network address information for an external print server

yyy.yyy.yyy.yyy

Sets the netmask information for an external print server

yyy.yyy.yyy.yyy

Sets the gateway information for an external print server

yyy.yyy.yyy.yyy

Parallel [x] menu

Sets the printer to automatically switch to PCL emulation when a print job received through a serial port requires it, regardless of the default printer language

  • On is the factory default setting.
  • When set to Off, the printer does not examine incoming data. The printer uses PostScript emulation if PS SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if PS SmartSwitch is set to Off.

Sets the printer to automatically switch to PS emulation when a print job received through a serial port requires it, regardless of the default printer language

  • On is the factory default setting.
  • When set to Off, the printer does not examine incoming data. The printer uses PCL emulation if PCL SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if PCL SmartSwitch is set to Off.

Sets the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol

  • Auto is the factory default setting.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is then updated.
Show 11 more labels / short text on this page
Menu item Description · ENA Address · ENA Netmask · ENA Gateway · Menu item Description · PCL SmartSwitch · On Off · PS SmartSwitch · On Off · NPA Mode · Auto On Off
Page 105 of the Lexmark C 790 user manual — Parallel [x] menu
Page 105 · click to enlarge
Page 105

Understanding the printer menus 105

Sets the size of the parallel input buffer

Auto 3KB to [maximum size allowed] Disabled

  • Auto is the factory default setting.
  • Disabled turns off job buffering. Any print jobs already buffered on the printer hard disk are printed before normal processing resumes.
  • The parallel buffer size setting can be changed in 1 ‑ KB increments.
  • The maximum size allowed depends on the amount of memory in the printer, the size of the other link buffers, and whether Resource Save is set to On or Off.
  • To increase the maximum size range for the Parallel Buffer, disable or reduce the size of the USB, serial, and network buffers.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is then updated.

Temporarily stores print jobs on the printer hard disk before printing

  • Off is the factory default setting.
  • On buffers print jobs on the printer hard disk.
  • Auto buffers print jobs only if the printer is busy processing data from another input port.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is then updated.

Enables bidirectional communication through the parallel port

  • On is the factory default setting.
  • Off disables parallel port negotiation.

Specifies the parallel port protocol

  • Fastbytes is the factory default setting. It provides compatibility with most existing parallel ports and is the recommended setting.
  • Standard tries to resolve parallel port communication problems.

Determines if the printer honors printer hardware initialization requests from the computer

  • Off is the factory default setting.
  • The computer requests initialization by activating the Init signal from the parallel port. Many personal computers activate the Init signal each time the computer is turned on.

Determines if the parallel port data is sampled on the leading or trailing edge of a strobe

Show 12 more labels / short text on this page
Menu item Description · Parallel Buffer · Job Buffering · Off On Auto · Advanced Status · On Off · Protocol · Fastbytes Standard · Honor Init · Off On · Parallel Mode 2 · On Off
Page 106 of the Lexmark C 790 user manual — Serial [x] menu
Page 106 · click to enlarge
Page 106

Understanding the printer menus 106

Sets the printer to process Macintosh binary PostScript print jobs

  • Auto is the factory default setting.
  • Off filters print jobs using the standard protocol.
  • On processes raw binary PostScript print jobs.

Sets the network address information for an external print server

yyy.yyy.yyy.yyy

Sets the netmask information for an external print server

yyy.yyy.yyy.yyy

Sets the gateway information for an external print server

yyy.yyy.yyy.yyy

Serial [x] menu

Sets the printer to automatically switch to PCL emulation when a print job received through a serial port requires it, regardless of the default printer language

  • On is the factory default setting.
  • When set to Off, the printer does not examine incoming data. The printer uses PostScript emulation if PS SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if PS SmartSwitch is set to Off.

Sets the printer to automatically switch to PS emulation when a print job received through a serial port requires it, regardless of the default printer language

  • On is the factory default setting.
  • When set to Off, the printer does not examine incoming data. The printer uses PCL emulation if PCL SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if PCL SmartSwitch is set to Off.
Show 11 more labels / short text on this page
Menu item Description · Mac Binary PS · Auto On Off · ENA Address · ENA Netmask · ENA gateway · Menu item Description · PCL SmartSwitch · On Off · PS SmartSwitch · On Off
Page 107 of the Lexmark C 790 user manual — DTR DTR/DSR XON/XOFF XON/XOFF/DTR XONXOFF/DTRDSR
Page 107 · click to enlarge
Page 107

Understanding the printer menus 107

Sets the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol

  • Auto is the factory default setting. Auto sets the printer to examine data, determine the format, and then processes it appropriately.
  • When set to On, the printer performs NPA processing. If the data is not in NPA format, it is rejected as bad data.
  • When set to Off, the printer does not perform NPA processing.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is then updated.

Sets the size of the serial input buffer

Auto 3KB to [maximum size allowed] Disabled

  • Auto is the factory default setting.
  • Disabled turns off job buffering. Any jobs already buffered on the disk are printed before normal processing is resumed.
  • The serial buffer size setting can be changed in 1 ‑ KB increments.
  • The maximum size allowed depends on the amount of memory in the printer, the size of the other link buffers, and whether Resource Save is set to On or Off.
  • To increase the maximum size range for the Serial Buffer, disable or reduce the size of the parallel, serial, and network buffers.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is then updated.

Temporarily stores print jobs on the printer hard disk before printing

  • Off is the factory default setting. The printer does not buffer print jobs on the printer hard disk.
  • On buffers print jobs on the printer hard disk.
  • Auto buffers print jobs only if the printer is busy processing data from another input port.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is then updated.

Selects the hardware and software handshaking settings for the serial port

DTR DTR/DSR XON/XOFF XON/XOFF/DTR XONXOFF/DTRDSR

  • DTR is the factory default setting.
  • DTR/DSR is a hardware handshaking setting.
  • XON/XOFF is a software handshaking setting.
  • XON/XOFF/DTR and XON/XOFF/DTR/DSR are combined hardware and software handshaking settings.
Show 7 more labels / short text on this page
Menu item Description · NPA Mode · Auto On Off · Serial Buffer · Job Buffering · Off On Auto · Protocol
Page 108 of the Lexmark C 790 user manual — SMTP Setup menu
Page 108 · click to enlarge
Page 108

Understanding the printer menus 108

Determines whether the printer communicates availability to the computer

  • Off is the factory default setting.
  • This menu item applies only to the serial port if Serial Protocol is set to XON/XOFF.

Specifies the rate at which data can be received through the serial port

9600 19200 38400 57600 115200 138200 172800 230400 345600 1200 2400 4800

  • 9600 is the factory default setting.
  • 138200, 172800, 230400, and 345600 baud rates are only displayed in the Standard Serial menu. These settings do not appear in the Serial Option 1, Serial Option 2, or Serial Option 3 menus.

Specifies the number of data bits sent in each transmission frame

Sets the parity for serial input and output data frames

None Ignore Even Odd

Determines whether the printer uses the DSR Signal

  • Off is the factory default setting.
  • DSR is a handshaking signal used by most serial cables. The serial port uses DSR to distinguish data sent by the computer from data created by electrical noise in the serial cable. The electrical noise can cause stray characters to print. Set this to On to prevent stray characters from printing.

SMTP Setup menu

Primary SMTP Gateway Specifies SMTP server gateway and port information

Secondary SMTP Gateway Port

Show 10 more labels / short text on this page
Menu item Description · Robust XON · Off On · Baud · Data Bits · Parity · Honor DSR · Off On · Menu item Description · Secondary SMTP Gateway
Page 109 of the Lexmark C 790 user manual — SMTP Setup menu
Page 109 · click to enlarge
Page 109

Understanding the printer menus 109

5–30 Specifies the amount of time in seconds before the server stops trying to send an e‑mail

Reply Address Specifies a reply address of up to 128 characters in the e-mail sent by the printer

Sets the printer to use SSL for increased security when connecting to the SMTP server

  • Disabled is the factory default setting.
  • When the Negotiate setting is used, the SMTP server determines if SSL will be used.

Specifies the type of user authentication required for scan to e‑mail privileges

No authentication required Login/Plain CRAM‑MD5 Digest‑MD5 NTLM Kerberos 5

Device‑Initiated E‑mail

Specifies what credentials will be used when communicating to the SMTP server. Some SMTP servers require credentials to send an e-mail.

None Use Device SMTP Credentials

User‑Initiated E‑mail

  • None is the factory default setting for Device and User ‑ Initiated E ‑ mail.
  • Device Userid and Device Password are used to log in to the SMTP server when Use Device SMTP Credentials is selected.

None Use Device SMTP Credentials Use Session User ID & Password Use Session E‑mail address & Password Prompt User

Show 9 more labels / short text on this page
Menu item Description · SMTP Timeout · Use SSL · Disabled Negotiate Required · SMTP Server Authentication · Device Userid · Device Password · Kerberos 5 Realm · NTLM Domain
Page 110 of the Lexmark C 790 user manual — Confidential Print menu
Page 110 · click to enlarge
Page 110

Understanding the printer menus 110

Security menu

Miscellaneous Security Settings menu

Limits the number and time frames of failed login attempts from the printer control panel before all users are locked out

1–10 Failure time frame

  • “Login failures” specifies the number of failed login attempts before users are locked out. 3 attempts is the factory default setting.
  • “Failure time frame” specifies the time frame during which failed login attempts can be made before users are locked out. 5 minutes is the factory default setting.
  • “Lockout time” specifies how long users are locked out after exceeding the login failures limit. 5 minutes is the factory default setting.
  • Panel Login Timeout specifies how long the printer remains idle on the home screen before automatically logging the user off. 30 seconds is the factory default setting.
  • Remote Login Timeout specifies how long a remote interface (for example, a Web page) can remain idle before automatically logging the user off. 10 minutes is the factory default setting.

1–60 Panel Login Timeout

1–900 Remote Login Timeout

Confidential Print menu

Limits the number of times an invalid PIN can be entered

  • This menu appears only if a formatted, non-defective printer hard disk is installed.
  • Once the limit is reached, the print job for that user name and that PIN are deleted.

Limits the amount of time a confidential print job stays in the printer before it is deleted

Off 1 hour 4 hours 24 hours 1 week

  • If the Job Expiration setting is changed while confidential print jobs reside on the printer RAM or printer hard disk, then the expiration time for those print jobs does not change to the new default value.
  • If the printer is turned off, then all confidential jobs held in printer RAM are deleted.

Sets a time limit on how long the printer stores print jobs

Off 1 hour 4 hours 24 hours 1 week

Show 9 more labels / short text on this page
Menu item Description · Login Restriction · Login failures · 1–60 Lockout time · Menu item Description · Max Invalid PIN · Off 2–10 · Confidential Job Expiration · Repeat Job Expiration
Page 111 of the Lexmark C 790 user manual — Erase Temporary Data Files menu
Page 111 · click to enlarge
Page 111

Understanding the printer menus 111

Sets a time limit on how long the printer stores print jobs needing verification

Off 1 hour 4 hours 24 hours 1 week

Sets a time limit on how long the printer stores print jobs for printing at a later time

Off 1 hour 4 hours 24 hours 1 week

Erase Temporary Data Files menu

Erase Temporary Data Files deletes only print job data on the printer hard disk that are not currently in use by the file system. All permanent data on the hard disk are preserved, such as downloaded fonts, macros, and held jobs.

Specify the mode for erasing temporary data files.

Specify a method for automatic disk wiping.

Single pass Multi‑pass

  • Single pass is the factory default setting.
  • Highly confidential information should be erased using only the Multiple pass method.

Specify a method for manual disk wiping.

Single pass Multi‑pass

Specify a method for a scheduled disk wiping.

Single pass Multi‑pass

Show 9 more labels / short text on this page
Menu item Description · Verify Job Expiration · Reserve Job Expiration · Use To · Wiping Mode · Off Auto Manual · Automatic Method · Manual Method · Scheduled Method
Page 112 of the Lexmark C 790 user manual — Set Date and Time menu
Page 112 · click to enlarge
Page 112

Understanding the printer menus 112

Security Audit Log menu

Export Log Enables an authorized user to export the audit log

  • To export the audit log from the printer control panel, a flash drive must be attached to the printer.
  • From the Embedded Web Server, the audit log can be downloaded to a computer.

Specifies whether audit logs are deleted

Specifies whether and how audit logs are created

No Yes Enable Remote Syslog

  • Enable Audit determines if events are recorded in the secure audit log and remote syslog. No is the factory default setting.
  • Enable Remote Syslog determines if logs are sent to a remote server. No is the factory default setting.
  • Remote Syslog Facility determines the value used to send logs to the remote syslog server. 4 is the factory default setting.
  • With the security audit log activated, the severity value of each event is recorded. 4 is the factory default setting.

No Yes Remote Syslog Facility

0–23 Severity of events to log

Set Date and Time menu

Current Date and Time Shows the current date and time settings for the printer

Manually Set Date and Time

  • Date and Time is set in YYYY-MM-DD HH:MM format.
  • Manually setting the date and time sets Enable NTP to Off.

[list of time zones]

Enables Network Time Protocol, which synchronizes the clocks of devices on a network

  • On is the factory default setting.
  • The setting is turned off if you manually set the date and time.
Show 12 more labels / short text on this page
Menu item Description · Delete Log · Yes No · Configure Log · Enable Audit · Menu item Description · [input date/time] · Time Zone · Automatically observe DST · On Off · Enable NTP · On Off
Page 113 of the Lexmark C 790 user manual — General Settings menu
Page 113 · click to enlarge
Page 113

Understanding the printer menus 113

Settings menu

General Settings menu

Set the language of the text appearing on the Embedded Web Server, Local Printer Settings for Windows, or Printer Settings for Macintosh.

English Francais Deutsch Italiano Espanol Greek Dansk Norsk Nederlands Svenska Portuguese Suomi Russian Polski Magyar Turkce Cesky Simplified Chinese Traditional Chinese Korean Japanese

Minimize the use of energy, paper, or specialty media.

Off Energy Energy/Paper Paper

  • Off is the factory default setting. This resets the printer to its factory default settings.
  • Energy minimizes the power used by the printer. Performance may be affected, but print quality is not.
  • Energy/Paper minimizes the use of power, paper, and specialty media.
  • Paper minimizes the amount of paper and specialty media needed for a print job. Performance may be affected, but print quality is not.

Minimize the printer noise.

Run the setup wizard.

Show 7 more labels / short text on this page
Use To · Display Language · Eco‑Mode · Quiet Mode · Off On · Run Initial setup · Yes No
Page 114 of the Lexmark C 790 user manual — Settings menu
Page 114 · click to enlarge
Page 114

Understanding the printer menus 114

Specify the language for the control panel keyboard.

English Francais Francais Canadien Deutsch Italiano Espanol Greek Dansk Norsk Nederlands Svenska Suomi Portuguese Russian Polski Swiss German Swiss French Korean Magyar Turkce Cesky Simplified Chinese Traditional Chinese Japanese Custom Key 1

Specify the unit of measurement for paper sizes.

U.S. Metric

  • U.S. is the factory default setting.
  • The initial setting is determined by your country or region selection in the initial setup wizard.
Show 4 more labels / short text on this page
Use To · Keyboard · Keyboard Type · Paper Sizes
Page 115 of the Lexmark C 790 user manual — Settings menu
Page 115 · click to enlarge
Page 115

Understanding the printer menus 115

Specify what is displayed in the upper corners of the home screen.

Left side Right side Custom Text [x] [x] Toner Fuser Transfer Module

For the Left side and Right side menus, select from the following options:

None IP Address Hostname Contact Name Location Date/Time mDNS/DDNS Service Name Zero Configuration Name Custom Text [x] Model Name

  • IP Address is the factory default setting for Left side.
  • Date/Time is the factory default setting for Right side.

Customize the displayed information for certain menus.

Waste Toner Bottle Paper Jam Load Paper Service Errors

Select from the following options:

No Yes Message to Display

Change the icons that appear on the home screen.

Change language Search Held Jobs Held jobs USB Drive Profiles and Solutions Bookmarks Jobs by user Remote Operator Panel Background and Idle Screen Showroom Forms and Favorites Eco‑Settings

For each icon, select from the following options:

Display Do Not Display

Show 8 more labels / short text on this page
Use To · Displayed Information · Displayed Information · Display · Default Alternate Default · [text entry] Alternate · [text entry] · Home screen customization
Page 116 of the Lexmark C 790 user manual — Settings menu
Page 116 · click to enlarge
Page 116

Understanding the printer menus 116

Format the date.

[MM‑DD‑YYYY] [DD‑MM‑YYYY] [YYYY‑MM‑DD]

Format the time.

12 hour 24 hour

20–100 Specify the brightness of the display.

Determine if indicator lights blink when the printer encounters errors.

Set the audio volume for the buttons.

  • On is the factory default setting for Button Feedback.
  • 5 is the factory default setting for Volume.

Specify whether bookmarks are displayed from the Held Jobs area.

Web Page Refresh Rate

30–300 Specify the number of seconds between Embedded Web Server refreshes.

Contact Name Specify a contact name for the printer.

Location Specify the location of the printer.

Set an alarm when the printer requires user intervention. For each alarm type, select from the following options:

Alarm Control Cartridge Alarm Staple Alarm Hole Punch Alarm

  • Single is the factory default setting for Alarm Control and Cartridge Alarm. This sounds several short beeps.
  • Off is the factory default setting for Staple Alarm and Hole Punch Alarm.
  • Continuous repeats several short beeps at a regular interval.
Show 13 more labels / short text on this page
Use To · Date Format · Time Format · Screen Brightness · Error Lighting · On Off · Audio Feedback · Button Feedback · On Off Volume · Show Bookmarks · Yes No · Alarms · Off Single Continuous
Page 117 of the Lexmark C 790 user manual — Settings menu
Page 117 · click to enlarge
Page 117

Understanding the printer menus 117

Set the amount of time before the printer enters a lower power state.

Set the amount of time the printer waits after a job is printed before it goes into a reduced power state.

  • 20 minutes is the factory default setting.
  • Lower settings conserve more energy, but may require longer warm ‑ up times.
  • Select the lowest setting if the printer shares an electrical circuit with room lighting.
  • Select a high setting if the printer is in constant use. Under most circumstances, this keeps the printer ready to print.

Set the amount of time the printer waits before it enters Hibernate mode.

Disabled 1–3 hours 6 hours 1–3 days 1–2 weeks 1 month

Set the amount of time before the display returns to a Ready state.

Set the amount of time the printer waits to receive an end‑of‑job message before canceling the rest of the print job.

  • 90 seconds is the factory default setting.
  • When the timer expires, any partially printed page is printed, and then the printer checks to see if any new print jobs are waiting.
  • Print Timeout is available only when using PCL emulation.

Set the amount of time the printer waits for additional data before canceling a print job.

  • 40 seconds is the factory default setting.
  • Wait Timeout is available only when the printer is using PostScript emulation.
Show 17 more labels / short text on this page
Use To · Timeouts · Standby Mode · Disabled 1–240 · Timeouts · Sleep Mode · Disabled 1–240 · Timeouts · Hibernate Timeout · Timeouts · Screen Timeout · Timeouts · Print Timeout · Disabled 1–255 · Timeouts · Wait Timeout · Disabled 15–65535
Page 118 of the Lexmark C 790 user manual — Settings menu
Page 118 · click to enlarge
Page 118

Understanding the printer menus 118

Let the printer automatically continue printing from certain offline situations when these are not resolved within the specified time period.

Specify whether the printer reprints jammed pages.

  • Auto is the factory default setting. The printer reprints jammed pages unless the memory required to hold the pages is needed for other printer tasks.
  • On sets the printer to always reprint jammed pages.
  • Off sets the printer to never reprint jammed pages.

Successfully print a page that may not have printed otherwise.

  • Off is the factory default setting. This prints a partial page when there is not enough memory to print the whole page.
  • On sets the printer to process the whole page so the entire page prints.

Set the printer to hibernate mode when there is an active Ethernet connection.

Hibernate Timeout on Connection

Hibernate Do Not Hibernate

Determine how the printer, while in idle state, reacts to a short press of the Sleep button.

Sleep Hibernate Do Nothing

Press and Hold Sleep Button

Determine how the printer, while in idle state, reacts to a long press of the Sleep button.

Do Nothing Sleep Hibernate

Restore the printer factory default settings.

Do Not Restore Restore Now

  • Do Not Restore is the factory default setting.
  • Restore Now sets all printer settings to the factory default settings except for the Network/Ports menu settings. All downloads stored in the RAM are deleted.
Show 13 more labels / short text on this page
Use To · Print Recovery · Auto Continue · Disabled 5–255 · Print Recovery · Jam Recovery · Auto On Off · Print Recovery · Page Protect · Off On · Timeouts · Press Sleep Button · Factory Defaults
Page 119 of the Lexmark C 790 user manual — Flash Drive menu
Page 119 · click to enlarge
Page 119

Understanding the printer menus 119

Flash Drive menu

1–999 Specifies a default number of copies for each print job

Sets a default paper source for all print jobs

Tray [x] MP Feeder Manual Paper Manuel Envelope

Stacks the pages of a print job in sequence when printing multiple copies

On (1,2,1,2,1,2) Off (1,1,1,2,2,2)

Specifies whether prints are on one side or on both sides of the paper

1 sided 2 sided

Specifies whether prints are stapled

  • Off is the factory default setting.
  • This menu appears only when a stapler is installed.

Specifies whether prints have punched holes

  • Off is the factory default setting.
  • This menu appears only when a puncher is installed.

Determines the type of punch finishing performed on a printed output

2 holes 3 holes 4 holes

  • 3 holes is the US factory default setting. 4 holes is the international factory default setting.
  • This menu appears only when a puncher is installed.

Defines the way duplex pages are bound and how the printing on the back of the page is oriented in relation to the printing on the front of the page

Long Edge Short Edge

  • Long Edge is the factory default setting. Long edge assumes binding along the long edge of the page (left edge for portrait and top edge for landscape).
  • Short edge assumes binding along the short edge of the page (top edge for portrait and left edge for landscape).
Show 14 more labels / short text on this page
Menu item Description · Copies · Paper Source · Color · Generates color outputs · Color Black Only · Collate · Sides (Duplex) · Staple · Off On · Hole Punch · Off On · Hole Punch Mode · Duplex Binding
Page 120 of the Lexmark C 790 user manual — Flash Drive menu
Page 120 · click to enlarge
Page 120

Understanding the printer menus 120

Specifies the orientation of a multiple‑page document

Specifies that multiple‑page images be printed on one side of a paper

Off 2‑Up 3‑Up 4‑Up 6‑Up 9‑Up 12‑Up 16‑Up

  • Off is the factory default setting.
  • The number selected is the number of page images that will print per side.

Prints a border on each page image when using Paper Saver Border

Specifies the positioning of multiple‑page images when using Paper Saver Ordering

Horizontal Reverse Horizontal Reverse Vertical Vertical

  • Horizontal is the factory default setting.
  • Positioning depends on the number of page images and whether they are in portrait or landscape orientation.

Specifies whether blank separator sheets are inserted

Off Between Copies Between Jobs Between Pages

  • Off is the factory default setting.
  • Between Copies inserts a blank sheet between each copy of a print job if Collation is set to On. If Collation is set to Off, then a blank page is inserted between each set of printed pages, such as after all page 1's and after all page 2's.
  • Between Jobs inserts a blank sheet between print jobs.
  • Between Pages inserts a blank sheet between each page of the print job. This setting is useful when printing transparencies or inserting blank pages in a document for notes.

Specifies the paper source for separator sheets

Tray [x] Manual Feeder

  • Tray 1 (standard tray) is the factory default setting.
  • From the Paper menu, Configure MP must be set to Cassette in order for Manual Feeder to appear as a menu setting.

Specifies whether blank pages are inserted in a print job

Do Not Print Print

Show 10 more labels / short text on this page
Menu item Description · Paper Saver Orientation · Auto Landscape Portrait · Paper Saver · Paper Saver Border · None Solid · Paper Saver Ordering · Separator Sheets · Separator Sheet Source · Blank Pages
Page 121 of the Lexmark C 790 user manual — Job Accounting menu
Page 121 · click to enlarge
Page 121

Understanding the printer menus 121

Setup menu

Set the default printer language.

PCL Emulation PS Emulation

  • PS Emulation is the factory default setting. PS Emulation uses a PS interpreter for processing print jobs.
  • PCL Emulation uses a PCL interpreter for processing print jobs.
  • This does not prevent a software program from sending print jobs that use another printer language.

Set the logical and physical printable area.

Normal Fit To Page Whole Page

Set color toner use in printing.

Max Yield Max Speed

Set the printer to print text and graphics using only the black toner cartridge.

  • Off is the factory default setting.
  • This does not affect the ability of the printer to generate color output from flash drive print jobs.

Specify how the printer handles temporary downloads, such as fonts and macros stored in the RAM, when the printer receives a job that requires more than the available memory.

Specify the order in which confidential and held jobs are printed when Print All is selected.

Alphabetical Oldest First Newest First

Job Accounting menu

Determines if the printer creates a log of the print jobs it receives

Show 12 more labels / short text on this page
Use To · Printer Language · Print Area · Printer Usage · Black Only Mode · On Off · Resource Save · On Off · Print All Order · Menu item Description · Job Accounting Log · Off On
Page 122 of the Lexmark C 790 user manual — Setup menu
Page 122 · click to enlarge
Page 122

Understanding the printer menus 122

Job Accounting Utilities Lets you print and delete log files or export them to a flash drive

Determines how often a log file is created

Log Action at End of Frequency

Determines how the printer responds when the frequency threshold expires

None E‑mail Current Log E‑mail & Delete Current Log Post Current Log Post & Delete Current Log

Disk Near Full Level

Specifies the maximum size of the log file before the printer executes the Disk Near Full Action

Disk Near Full Action

Determines how the printer responds when the printer hard disk is nearly full

None E‑mail Current Log E‑mail & Delete Current Log E‑mail & Delete Oldest Log Post Current Log Post & Delete Current Log Post & Delete Oldest Log Delete Current Log Delete Oldest Log Delete All Logs Delete All But Current

  • None is the factory default setting.
  • The value defined in Disk Near Full Level determines when this action is triggered.

Determines how the printer responds when disk usage reaches the maximum limit (100MB)

None E‑mail & Delete Current Log E‑mail & Delete Oldest Log Post & Delete Current Log Post & Delete Oldest Log Delete Current Log Delete Oldest Log Delete All Logs Delete All But Current

URL to Post Logs Determines where the printer posts job accounting logs

E‑mail Address to Send Logs Specifies the e‑mail address to which the device sends job accounting logs

Log File Prefix Note: The current host name defined in the TCP/IP menu is used as the default log file prefix.

Show 5 more labels / short text on this page
Menu item Description · Accounting Log Frequency · Monthly Weekly · 1–99 Off · Disk Full Action
Page 123 of the Lexmark C 790 user manual — Finishing menu
Page 123 · click to enlarge
Page 123

Understanding the printer menus 123

Finishing menu

Specifies whether duplex (2‑sided) printing is set as the default for all print jobs

1 sided 2 sided

  • 1 sided is the factory default setting.
  • You can set 2 ‑ sided printing from the software program. For Windows users, click File > Print , and then click Properties , Preferences , Options , or Setup . For Macintosh users, choose File > Print , and then adjust the settings from the print dialog and pop ‑ up menus.

Defines the way duplexed pages are bound and how the printing on the back of the page is oriented in relation to the printing on the front of the page

Long Edge Short Edge

  • Long Edge is the factory default setting. Long edge assumes binding along the long edge of the page (left edge for portrait and top edge for landscape).
  • Short edge assumes binding along the short edge of the page (top edge for portrait and left edge for landscape).

1–999 Specifies the default number of copies for each print job

Specifies whether blank pages are inserted in a print job

Do Not Print Print

Stacks the pages of a print job in sequence when printing multiple copies

Off (1,1,1,2,2,2) On (1,2,1,2,1,2)

  • Off is the factory default setting.
  • On stacks the print job in sequence.

Specifies whether blank separator sheets are inserted

Off Between Copies Between Jobs Between Pages

  • Off is the factory default setting.
  • Between Copies inserts a blank sheet between each copy of a print job if Collate is set to On. If Collate is set to Off, then a blank page is inserted between each set of printed pages, such as after all page 1's and after all page 2's.
  • Between Jobs inserts a blank sheet between print jobs.
  • Between Pages inserts a blank sheet between each page of a print job. This setting is useful when printing transparencies or when inserting blank pages in a document.

Specifies the paper source for separator sheets

Tray [x] Manual Feeder

  • Tray 1 (standard tray) is the factory default setting.
  • From the Paper menu, Configure MP must be set to Cassette for Manual Feeder to appear as a menu setting.
Show 8 more labels / short text on this page
Menu item Description · Sides (Duplex) · Duplex Binding · Copies · Blank Pages · Collate · Separator Sheets · Separator Source
Page 124 of the Lexmark C 790 user manual — Finishing menu
Page 124 · click to enlarge
Page 124

Understanding the printer menus 124

Specifies that multiple‑page images be printed on one side of a paper

Off 2‑Up 3‑Up 4‑Up 6‑Up 9‑Up 12‑Up 16‑Up

  • Off is the factory default setting.
  • The number selected is the number of page images that will print per side.

Specifies the positioning of multiple‑page images

Horizontal Reverse Horizontal Reverse Vertical Vertical

  • Horizontal is the factory default setting.
  • Positioning depends on the number of page images and whether they are in portrait or landscape orientation.

Specifies the orientation of a multiple‑page document

Prints a border on each page image

Specifies whether prints are stapled

Specifies whether prints have punched holes

Determines the type of punch finishing performed on a print

2 holes 3 holes 4 holes

  • 3 holes is the US factory default setting. 4 holes is the international factory default setting.
  • This menu appears only when a puncher is installed.

Offsets pages at certain instances

None Between Copies Between Jobs

  • None is the factory default setting.
  • Between Copies offsets each copy of a print job if Collate is set to On. If Collate is set to Off, then each set of printed pages are offset, such as all page 1's and all page 2's.
  • Between Jobs sets the same offset position for the entire print job regardless of the number of copies printed.
  • This menu appears only when a stapler is installed.
Show 13 more labels / short text on this page
Menu item Description · Paper Saver · Paper Saver Ordering · Paper Saver Orientation · Auto Landscape Portrait · Paper Saver Border · None Solid · Staple Job · Off On · Hole Punch · Off On · Hole Punch Mode · Offset Pages
Page 125 of the Lexmark C 790 user manual — Quality menu
Page 125 · click to enlarge
Page 125

Understanding the printer menus 125

Quality menu

Specifies whether images are printed in monochrome grayscale or in color

  • Color is the factory default setting.
  • The printer driver is capable of overriding this setting.

Adjusts the color output on the printed page

  • Auto is the factory default setting. Auto applies different color conversion tables to each object on the printed page.
  • Manual allows customization of color tables using the settings available from the Manual Color menu.
  • Due to the differences in additive and subtractive colors, certain colors that appear on computer screens are impossible to duplicate on a printed page.

Specifies the printed output resolution

4800 CQ 1200 dpi

  • 4800 CQ is the factory default setting.
  • 1200 dpi provides the highest resolution output, and increases gloss.

1–5 Lightens or darkens the printed output

  • 4 is the factory default setting.
  • Selecting a smaller number can help conserve toner.
  • If Print Mode is set to Black Only, a setting of 5 increases toner density and darkness for all print jobs.
  • If Print Mode is set to Color, a setting of 5 is the same as a setting of 4.

Enables a print mode preferable for files such as architectural drawings, maps, electrical circuit diagrams, and flow charts

  • Off is the factory default setting.
  • You can set this option from the software program. For Windows users, click File > Print , and then click Properties , Preferences , Options , or Setup . For Macintosh users, choose File > Print , and then adjust the settings from the print dialog and pop ‑ up menus.
  • To set this option using the Embedded Web Server, type the network printer IP address in a browser window.

Reduces the amount of toner used for graphics and images. The amount of toner used for text is not reduced.

  • Off is the factory default setting.
  • On overrides Toner Darkness settings.
Show 11 more labels / short text on this page
Menu item Description · Print Mode · Color Black Only · Color Correction · Auto Off Manual · Print Resolution · Toner Darkness · Enhance Fine Lines · Off On · Color Saver · Off On
Page 126 of the Lexmark C 790 user manual — Quality menu
Page 126 · click to enlarge
Page 126

Understanding the printer menus 126

Adjusts brightness in color outputs

‑6 to 6

  • 0 is the factory default setting.
  • This does not affect files where CMYK color specifications are used.

0–5 Adjusts contrast in color outputs

  • 0 is the factory default setting.
  • This does not affect files where CMYK color specifications are used.

0–5 Adjusts saturation in color outputs

  • 0 is the factory default setting.
  • This does not affect files where CMYK color specifications are used.

Adjusts color in printed output by increasing or decreasing the amount of toner used for each color

‑5 to 5 Magenta

‑5 to 5 Yellow

‑5 to 5 Black

‑5 to 5 Reset Defaults

Prints sample pages for each of the RGB and CMYK color conversion tables used in the printer

sRGB Display sRGB Vivid Display—True Black Vivid Off—RGB US CMYK Euro CMYK Vivid CMYK Off—CMYK

  • Selecting any setting prints the sample.
  • Color samples consist of a series of colored boxes along with the RGB or CMYK combination that creates the color observed. These pages can be used to help decide which combinations to use to get the desired printed output.
  • From a browser window, type the IP address of the printer to access a complete list of color sample pages from the Embedded Web Server.
Show 7 more labels / short text on this page
Menu item Description · RGB Brightness · RGB Contrast · RGB Saturation · Color Balance · Cyan · Color Samples
Page 127 of the Lexmark C 790 user manual — Quality menu
Page 127 · click to enlarge
Page 127

Understanding the printer menus 127

Customizes the RGB color conversions

sRGB Display Display—True Black sRGB Vivid Off Vivid RGB Text

  • sRGB Display is the factory default setting for RGB Image. This applies a color conversion table to an output that matches the colors displayed on a computer monitor.
  • sRGB Vivid is the factory default setting for RGB Text and RGB Graphics. sRGB Vivid applies a color table that increases saturation. This is preferred for business graphics and text.
  • Vivid applies a color conversion table that produces brighter, more saturated colors.
  • Display—True Black applies a color conversion table that uses only black toner for neutral gray colors.

sRGB Vivid Off Vivid sRGB Display Display—True Black RGB Graphics

sRGB Vivid Off Vivid sRGB Display Display—True Black

Customizes the CMYK color conversions

US CMYK Euro CMYK Vivid CMYK Off CMYK Text

  • US CMYK is the US factory default setting. US CMYK applies a color conversion table that tries to produce output that matches SWOP color output.
  • Euro CMYK is the international factory default setting. Euro CMYK applies a color conversion table that tries to produce output that matches EuroScale color output.
  • Vivid CMYK increases color saturation for the US CMYK color conversion table.

US CMYK Euro CMYK Vivid CMYK Off CMYK Graphics

US CMYK Euro CMYK Vivid CMYK Off

Spot Color Replacement Provides the capability to assign specific CMYK values to named spot colors

Color Adjust Initiates a recalibration of color conversion tables and allows the printer to make adjustments for color variations in output

  • Calibrating starts when the menu is selected. Calibrating appears on the display until the process is finished.
  • Color variations in output sometimes result from changeable conditions such as room temperature and humidity. Color adjustments are made on printer algorithms. Color alignment is also recalibrated in this process.
Show 5 more labels / short text on this page
Menu item Description · Manual Color · RGB Image · Manual Color · CMYK Image
Page 128 of the Lexmark C 790 user manual — PDF menu
Page 128 · click to enlarge
Page 128

Understanding the printer menus 128

Utilities menu

Format the flash memory.

  • Yes deletes all data stored in flash memory.
  • No cancels the format request.
  • Flash memory refers to the memory added by installing a flash memory card in the printer.
  • The flash memory option card must not be read/write ‑ or write ‑ protected.
  • This menu item appears only when a non ‑ defective flash memory card is installed.

Activate Hex Trace Assist in isolating the source of a print job problem.

  • When activated, all data sent to the printer is printed in hexadecimal and character representation, and control codes are not executed.
  • To exit or deactivate Hex Trace, turn off or reset the printer.

Provide an estimate of the percentage coverage of toner on a page. The estimate is printed on a separate page at the end of each print job.

XPS menu

Prints a page containing information on errors, including XML markup errors

PDF menu

Scales page content to fit the selected paper size

Prints annotations in a PDF

Do Not Print Print

Show 12 more labels / short text on this page
Use To · Format Flash · Yes No · Coverage Estimator · Off On · Menu item Description · Print Error Pages · Off On · Menu item Description · Scale to Fit · No Yes · Annotations
Page 129 of the Lexmark C 790 user manual — 10U PC ‑ 8 12U PC ‑ 850
Page 129 · click to enlarge
Page 129

Understanding the printer menus 129

PostScript menu

Print a page containing the PostScript error.

Lock PS Startup Mode

Allow users to disable the SysStart file.

Enhance the contrast and sharpness of low‑resolution images and smoothen their color transitions.

  • Off is the factory default setting.
  • Image Smoothing has no effect on images that are 300 dpi or higher in resolution.

PCL Emul menu

Specifies the set of fonts used by the Font Name menu item

Resident Disk Download Flash All

  • Resident is the factory default setting. It shows the factory default set of fonts downloaded in RAM.
  • Flash and Disk settings show all fonts resident in that option. Make sure the flash option is properly formatted and is not read/write ‑ , or password ‑ protected.
  • Download shows all the fonts downloaded in RAM.
  • All shows all fonts available to any option.

Identifies a specific font and where it is stored

Specifies the symbol set for each font name

10U PC ‑ 8 12U PC ‑ 850

  • 10U PC ‑ 8 is the US factory default setting. 12U PC ‑ 850 is the international factory default setting.
  • A symbol set is a set of alphabetical and numeric characters, punctuation, and special symbols. Symbol sets support the different languages or specific programs such as math symbols for scientific text. Only the supported symbol sets are shown.
Show 11 more labels / short text on this page
Use To · Print PS Error · On Off · On Off · Image Smoothing · On Off · Menu item Description · Font Source · Font Name · RO Courier · Symbol Set
Page 130 of the Lexmark C 790 user manual — PostScript menu
Page 130 · click to enlarge
Page 130

Understanding the printer menus 130

Changes the point size for scalable typographic fonts

1.00–1008.00

  • 12 is the factory default setting.
  • Point Size refers to the height of the characters in the font. One point equals approximately 1/72 of an inch.
  • Point sizes can be increased or decreased in 0.25 ‑ point increments.

Specifies the font pitch for scalable monospaced fonts

0.08–100

  • 10 is the factory default setting.
  • Pitch refers to the number of fixed ‑ space characters per inch (cpi).
  • Pitch can be increased or decreased in 0.01 ‑ cpi increments.
  • For non ‑ scalable monospaced fonts, the pitch appears on the display but cannot be changed.

Specifies the orientation of text and graphics on a page

  • Portrait is the factory default setting.
  • Portrait prints text and graphics parallel to the short edge of the page.
  • Landscape prints text and graphics parallel to the long edge of the page.

Specifies the number of lines that print on each page

  • 60 is the US factory default setting. 64 is the international default setting.
  • The printer sets the amount of space between each line based on the Lines per Page, Paper Size, and Orientation settings. Select the desired Paper Size and Orientation before setting Lines per Page.

Sets the printer to print on A4‑size paper

198 mm 203 mm

  • 198 mm is the factory default setting.
  • The 203 ‑ mm setting sets the width of the page to allow the printing of eighty 10 ‑ pitch characters.

Specifies whether the printer automatically performs a carriage return (CR) after a line feed (LF) control command

Auto CR after LF

Specifies whether the printer automatically performs a line feed (LF) after a carriage return (CR) control command

Auto LF after CR

Show 16 more labels / short text on this page
Menu item Description · PCL Emulation Settings · Point Size · PCL Emulation Settings · Pitch · PCL Emulation Settings · Orientation · Portrait Landscape · PCL Emulation Settings · Lines per Page · PCL Emulation Settings · A4 Width · PCL Emulation Settings · Off On · PCL Emulation Settings · Off On
Page 131 of the Lexmark C 790 user manual — PostScript menu
Page 131 · click to enlarge
Page 131

Understanding the printer menus 131

Configures the printer to work with printer software or programs that use different source assignments for trays, drawers, and feeders

Off None 0–199 Assign Tray [x]

  • Off is the factory default setting.
  • None ignores the Select Paper Feed command. This selection is displayed only when it is selected by the PCL 5e interpreter.
  • 0–199 allows a custom setting to be assigned.

Off None 0–199 Assign Manual Paper

Off None 0–199 Assign Manual Env

Displays the factory default setting assigned to each tray, drawer, or feeder

MPF Default = 8 T1 Default = 1 T2 Default = 4 T3 Default = 5 T4 Default = 20 T5 Default = 21 Env Default = 6 MPaper Default = 2 MEnv Default = 3

Returns all tray, drawer, and feeder assignments to the factory default settings

Show 9 more labels / short text on this page
Menu item Description · Tray Renumber · Assign MP Feeder · Off None 0–199 · Tray Renumber · View Factory Defaults · Tray Renumber · Restore Defaults · Yes No
Page 132 of the Lexmark C 790 user manual — HTML menu
Page 132 · click to enlarge
Page 132

Understanding the printer menus 132

HTML menu

Joanna MT Letter Gothic Lubalin Graph Marigold MonaLisa Recut Monaco New CenturySbk New York Optima Oxford Palatino StempelGaramond Taffy Times TimesNewRoman Univers Zapf Chancery NewSansMTCS NewSansMTCT New SansMTJA NewSansMTKO

Sets the default font for HTML documents

Albertus MT Antique Olive Apple Chancery Arial MT Avant Garde Bodoni Bookman Chicago Clarendon Cooper Black Copperplate Coronet Courier Eurostile Garamond Geneva Gill Sans Goudy Helvetica Hoefler Text Intl CG Times Intl Courier Intl Univers

1–255 pt Sets the default font size for HTML documents

  • 12 pt is the factory default setting.
  • Font size can be increased in 1 ‑ point increments.

1–400% Scales the default font for HTML documents

  • 100% is the factory default setting.
  • Scaling can be increased in 1% increments.

Sets the page orientation for HTML documents

Show 7 more labels / short text on this page
Menu Item Description · Font Name · Menu item Description · Font Size · Scale · Orientation · Portrait Landscape
Page 133 of the Lexmark C 790 user manual — Help menu
Page 133 · click to enlarge
Page 133

Understanding the printer menus 133

8–255 mm Sets the page margin for HTML documents

  • 19 mm is the factory default setting.
  • Margin size can be increased in 1 ‑ mm increments.

Specifies whether to print backgrounds on HTML documents

Print Do Not Print

Image menu

Selects the optimal paper size, scaling, and orientation

Inverts bi‑tonal monochrome images

  • Off is the factory default setting.
  • This setting does not apply to GIF or JPEG images.

Scales the image to fit the selected paper size

Best Fit Anchor Center Fit Height/Width Fit Height Fit Width Anchor Top Left

  • Best Fit is the factory default setting.
  • When Auto Fit is set to On, Scaling is automatically set to Best Fit.

Sets the image orientation

Portrait Landscape Rev Portrait Rev Landscape

Help menu

Print All Guides Prints all the guides

Color Quality Provides information about solving color quality issues

Print Quality Provides information about solving print quality issues

Printing Guide Provides information about loading paper and other specialty media

Media Guide Provides a list of the paper sizes supported in trays and feeders

Show 11 more labels / short text on this page
Menu item Description · Margin Size · Backgrounds · Menu item Description · Auto Fit · On Off · Invert · Off On · Scaling · Orientation · Menu item Description
Page 134 of the Lexmark C 790 user manual — Image menu
Page 134 · click to enlarge
Page 134

Understanding the printer menus 134

Print Defects Guide Provides a template for determining the cause of repeating print quality defects, and lists settings that can be used to adjust print quality

Menu Map Provides a list of the control panel menus and settings

Information Guide Provides help in locating additional information

Connection Guide Provides information about connecting the printer locally (USB) or to a network

Moving Guide Provides instructions for safely moving the printer

Supplies Guide Provides information about ordering supplies

Menu item Description

Page 135 of the Lexmark C 790 user manual — Erasing non ‑ volatile memory
Page 135 · click to enlarge
Page 135

Securing the memory before moving the printer 135

Securing the memory before moving the printer

Statement of Volatility

Your printer contains various types of memory that can store device and network settings, and user data.

Type of memory Description

Volatile memory Your printer uses standard random access memory (RAM) to temporarily buffer user data during simple print jobs.

Non-volatile memory Your printer may use two forms of non-volatile memory: EEPROM and NAND (flash memory). Both types are used to store operating system, device settings, and network information.

Erase the content of any installed printer memory in the following circumstances:

  • The printer is being decommissioned.
  • The printer is being moved to a different department or location.
  • The printer is being serviced by someone from outside your organization.
  • The printer is being removed from your premises for service.
  • The printer is being sold to another organization.

Erasing volatile memory

The volatile memory (RAM) installed in your printer requires a power source to retain information. To erase the buffered data, simply turn off the printer.

Erasing non ‑ volatile memory

Erase individual settings, device and network settings, security settings, and embedded solutions by following these steps:

1 Turn off the printer.

2 Hold down 2 and 6 on the keypad while turning the printer on. Release the buttons only when the screen with the progress bar appears.

The printer performs a power-on sequence, and then the Configuration menu appears. When the printer is fully turned on, a list of functions appears on the printer display.

3 Press the up or down arrow button until Wipe All Settings appears.

The printer will restart several times during this process.

4 Navigate to:

Back > Exit Config Menu

Page 136 of the Lexmark C 790 user manual — Using the Embedded Web Server
Page 136 · click to enlarge
Page 136

Securing the memory before moving the printer 136

The printer will perform a power‑on reset, and then return to normal operating mode.

Erasing printer hard disk memory

  • Some printer models may not have a printer hard disk installed.
  • Configuring Erase Temporary Data Files in the printer menus lets you remove residual confidential material left by print jobs by securely overwriting files that have been marked for deletion.

Using the printer control panel

1 Turn off the printer.

2 Hold down 2 and 6 while turning the printer on. Release the buttons only when the screen with the progress bar appears.

The printer performs a power-on sequence, and then the Configuration menu appears. When the printer is fully turned on, a list of functions appears on the printer display.

  • 3 Press the up or down arrow button until Wipe Disk appears, and then select one of the following:
  • Wipe disk (fast) —This lets you overwrite the disk with all zeroes in a single pass.
  • Wipe disk (secure) —This lets you overwrite the disk with random bit patterns several times, followed by a verification pass. A secure overwrite is compliant with the DoD 5220.22 ‑ M standard for securely erasing data from a hard disk. Highly confidential information should be wiped using this method.

4 Press the up or down arrow button until Yes appears, and then proceed with disk wiping.

  • A status bar will indicate the progress of the disk wiping task.
  • Disk wiping can take from several minutes to more than an hour, during which the printer will be unavailable for other user tasks.

5 Navigate to:

Back > Exit Config Menu

The printer will perform a power‑on reset, and then return to normal operating mode.

Configuring printer hard disk encryption

Enabling hard disk encryption helps prevent the loss of sensitive data in the event your printer or its hard disk is stolen.

Using the Embedded Web Server

1 From the Embedded Web Server, click Settings > Security > Disk Encryption.

2 From the Disk encryption menu, select Enable.

Page 137 of the Lexmark C 790 user manual — Using the printer control panel
Page 137 · click to enlarge
Page 137

Securing the memory before moving the printer 137

  • Enabling disk encryption will erase the content of the printer hard disk.
  • Disk encryption can take from several minutes to more than an hour, during which the printer will be unavailable for other user tasks.

3 Click Submit.

Using the printer control panel

1 Turn off the printer.

2 Hold down and 6 MNO while turning the printer on. Release the buttons only when the screen with the progress bar appears.

The printer performs a power-on sequence, and then the Configuration menu appears. Once the printer is fully powered up, the touch screen displays a list of functions, instead of standard home screen icons such as Copy or Fax.

3 Touch Disk Encryption > Enable.

4 Touch Yes to proceed with disk wiping.

A status bar will indicate the progress of the disk wiping task. After the disk has been encrypted, the printer will return to the Enable/Disable screen.

  • Do not turn off the printer during the encryption process. Doing so may result in loss of data.
  • Disk encryption can take from several minutes to more than an hour, during which the printer will be unavailable for other user tasks.

5 Touch Back, and then Exit Config Menu.

The printer will power‑on reset, and then return to normal operating mode.

Page 138 of the Lexmark C 790 user manual — Cleaning the printhead lenses
Page 138 · click to enlarge
Page 138

Maintaining the printer 138

Maintaining the printer

Cleaning the exterior of the printer

1 Make sure that the printer is turned off and unplugged from the wall outlet.

2 Remove paper from the standard exit bin.

3 Dampen a clean, lint‑free cloth with water.

4 Wipe only the outside of the printer, making sure to include the standard exit bin.

5 Make sure the paper support and standard exit bin are dry before beginning a new print job.

Cleaning the printhead lenses

Clean the printhead lenses when you encounter print quality problems.

1 Open the front door.

Lexmark C 790 — Cleaning the printhead lenses diagram (page 138)
Fig. 70 · Cleaning the printhead lenses

2 Remove all print cartridges.

Page 139 of the Lexmark C 790 user manual — Storing supplies
Page 139 · click to enlarge
Page 139

Maintaining the printer 139

Lexmark C 790 — Storing supplies diagram (page 139)
Fig. 71 · Storing supplies

3 Locate the four printhead lenses.

Lexmark C 790 — Storing supplies diagram (page 139)
Fig. 72 · Storing supplies

4 Clean the lenses using compressed air.

5 Reinstall the print cartridges.

6 Close the front door.

Lexmark C 790 — Storing supplies diagram (page 139)
Fig. 73 · Storing supplies

Storing supplies

Choose a cool, clean storage area for the printer supplies. Store supplies right side up in their original packing until you are ready to use them.

Do not expose supplies to:

  • Direct sunlight
  • Temperatures above 35°C (95°F)
Page 140 of the Lexmark C 790 user manual — Ordering a print cartridge
Page 140 · click to enlarge
Page 140

Maintaining the printer 140

  • High humidity above 80%
  • Salty air
  • Corrosive gases
  • Heavy dust

Checking the status of supplies

A message appears on the display when a replacement supply item is needed or when maintenance is required.

Checking the status of supplies from the printer control panel

From the home screen, touch Status/Supplies > View Supplies.

Checking the status of supplies from a network computer

1 Type the printer IP address into the address field of your Web browser.

If you do not know the IP address of the printer, you can:

  • View the IP address on the printer control panel in the TCP/IP section under the Networks/Ports menu.
  • Print a network setup page or the menu settings pages and locate the IP address in the TCP/IP section.

2 Click Device Status.

The Device Status page appears, displaying a summary of supply levels.

Ordering supplies

To order supplies in the U.S., contact Lexmark at 1-800-539-6275 for information about Lexmark authorized supplies dealers in your area. In other countries or regions, go to www.lexmark.com or contact the place where you purchased the printer.

The Lexmark Return Program lets you purchase Lexmark supplies at a discounted price in exchange for your agreement to use the supplies only once and return them only to Lexmark for remanufacturing or recycling.

Ordering a print cartridge

When 88 [color] cartridge low or 88 [color] cartridge nearly low appears, order a new cartridge.

Estimated cartridge yield is based on the ISO/IEC 19798 standard. Extremely low print coverage (less than 1.25%) for extended periods of time may negatively affect actual yield and may cause cartridge parts to fail prior to exhaustion of toner.

Page 141 of the Lexmark C 790 user manual — 25A0013
Page 141 · click to enlarge
Page 141

Maintaining the printer 141

Part name Lexmark Return Program Cartridge Regular cartridge

C792A1CG

C792A2CG

Cyan Extra High Yield Print Cartridge

C792X1CG

C792X2CG

Magenta Print Cartridge Magenta Extra High Yield Print Cartridge

C792A1MG C792X1MG

C792A2MG C792X2MG

C792A1YG

C792A2YG

Yellow Extra High Yield Print Cartridge

C792X1YG

C792X2YG

C792A1KG

C792A2KG

Black Extra High Yield Print Cartridge

C792X1KG

C792X2KG

Ordering a fuser or a transfer module

When 80 Fuser Life Warning or 83 Transfer Module Life Warning appears, order a replacement fuser or a transfer module.

When 80 Replace Fuser or 83 Replace Transfer Module appears, install the new fuser or the new transfer module. For installation information, see the documentation that came with the part.

Part name Part number

Fuser 40X7102 (100 volts)

Ordering a waste toner bottle

When 82 Waste toner bottle nearly full appears, order a replacement waste toner bottle.

When 82 Replace waste toner bottle appears, replace the waste toner bottle.

Part name Part number

Waste toner bottle C792X77G

Ordering staple cartridges

When Staples Low or Staples Empty appears, order the specified staple cartridge.

For more information, see the illustrations inside the stapler door.

Part name Part number

25A0013

(Since a pack contains 5,000 staples, a 3‑pack contains 15,000 staples.)

Show 7 more labels / short text on this page
Cyan Print Cartridge · Yellow Print Cartridge · Black Print Cartridge · 40X7100 (115 volts) · 40X7101 (230 volts) · Transfer Module 40X7103 · Staple Cartridges–3 pack
Page 142 of the Lexmark C 790 user manual — Replacing a print cartridge
Page 142 · click to enlarge
Page 142

Maintaining the printer 142

Ordering a cleaning kit

Use the wet and dry wipes from the cleaning kit to clean the touch screen.

Part name Part number

Cleaning kit (wet and dry wipes) 40X0392

Replacing supplies

Replacing a print cartridge

1 Open the front door.

Lexmark C 790 — Replacing a print cartridge diagram (page 142)
Fig. 74 · Replacing a print cartridge

2 Lift the green handle and pull the print cartridge. Grasp the top handle and lift the cartridge out of the machine.

Lexmark C 790 — Replacing a print cartridge diagram (page 142)
Fig. 75 · Replacing a print cartridge
Page 143 of the Lexmark C 790 user manual — Ordering a cleaning kit
Page 143 · click to enlarge
Page 143

Maintaining the printer 143

3 Place the old cartridge in the replacement cartridge shipping box, and then attach the return label to the box for shipping.

Lexmark C 790 — Ordering a cleaning kit diagram (page 143)
Fig. 76 · Ordering a cleaning kit

4 Unpack a new print cartridge.

Lexmark C 790 — Ordering a cleaning kit diagram (page 143)
Fig. 77 · Ordering a cleaning kit
Page 144 of the Lexmark C 790 user manual — Ordering a cleaning kit
Page 144 · click to enlarge
Page 144

Maintaining the printer 144

5 Shake the new cartridge front‑to‑back and side‑to‑side to evenly distribute the toner.

Lexmark C 790 — Ordering a cleaning kit diagram (page 144)
Fig. 78 · Ordering a cleaning kit

6 Remove the red packing strip from the new cartridge.

Lexmark C 790 — Ordering a cleaning kit diagram (page 144)
Fig. 79 · Ordering a cleaning kit

7 Insert the new cartridge into the printer, and then push the green handle back in place.

Lexmark C 790 — Ordering a cleaning kit diagram (page 144)
Fig. 80 · Ordering a cleaning kit
Page 145 of the Lexmark C 790 user manual — Replacing the waste toner bottle
Page 145 · click to enlarge
Page 145

Maintaining the printer 145

8 Close the front door.

Lexmark C 790 — Replacing the waste toner bottle diagram (page 145)
Fig. 81 · Replacing the waste toner bottle

Replacing the waste toner bottle

Replace the waste toner bottle when 82.xx Replace waste toner bottle appears. The printer will not continue printing until the waste toner bottle is replaced.

1 Remove the replacement waste toner bottle from its shipping box, and then unpack it.

Lexmark C 790 — Replacing the waste toner bottle diagram (page 145)
Fig. 82 · Replacing the waste toner bottle

2 Open the printer front door, and then open tray 1.

3 Pull the green tabs sideways, and then grasp and pull the tabs with both hands to remove the waste toner bottle.

Lexmark C 790 — Replacing the waste toner bottle diagram (page 145)
Fig. 83 · Replacing the waste toner bottle

4 Place the waste toner bottle in the recycling bag.

Page 146 of the Lexmark C 790 user manual — Before moving the printer
Page 146 · click to enlarge
Page 146

Maintaining the printer 146

5 Place the bag into the shipping box you removed the replacement part from.

6 Peel the recycling label off, and place it on the shipping box.

7 Insert the new waste toner bottle into the printer.

Lexmark C 790 — Moving the printer diagram (page 146)
Fig. 84 · Moving the printer

8 Close tray 1, and then close the front door.

Moving the printer

Before moving the printer

Page 147 of the Lexmark C 790 user manual — Shipping the printer
Page 147 · click to enlarge
Page 147

Maintaining the printer 147

  • Turn the printer off using the power switch, and then unplug the power cord from the wall outlet.
  • Disconnect all cords and cables from the printer before moving it.
  • Lift the printer off of the optional drawer and set it aside instead of trying to lift the drawer and printer at the same time.

Moving the printer to another location

The printer and options can be safely moved to another location by following these precautions:

  • Any cart used to move the printer must have a surface able to support the full footprint of the printer. Any cart used to move the options must have a surface able to support the dimensions of the options.
  • Keep the printer in an upright position.
  • Avoid severe jarring movements.

Shipping the printer

When shipping the printer, use the original packaging or call the place of purchase for a relocation kit.

Page 148 of the Lexmark C 790 user manual — Checking the status of the printer
Page 148 · click to enlarge
Page 148

Administrative support

Finding advanced networking and administrator information

This chapter covers basic administrative support tasks using the Embedded Web Server. For more advanced system support tasks, see the Networking Guide on the Software and Documentation CD or the Embedded Web Server — Security: Administrator's Guide on the Lexmark support Web site at http://support.lexmark.com.

Using the Embedded Web Server

If the printer is installed on a network, then the Embedded Web Server is available for a range of functions including:

  • Viewing a virtual display of the printer control panel
  • Checking the status of the printer supplies
  • Configuring printer settings
  • Configuring network settings
  • Viewing reports

To access the Embedded Web Server for your printer:

1 Type the printer IP address into the address field of your Web browser.

  • If you do not know the IP address of the printer, then print a network setup page, and then locate the IP address in the TCP/IP section.
  • If you are using a proxy server, then temporarily disable it to load the Embedded Web Server correctly.

2 Press Enter.

Checking the virtual display

1 Open an Embedded Web Server associated with your printer.

Type the printer IP address into the address field of your Web browser.

If you do not know the IP address of the printer, you can:

  • View the IP address on the printer control panel in the TCP/IP section under the Networks/Ports menu.
  • Print a network setup page or the menu settings pages and locate the IP address in the TCP/IP section.

2 Check the virtual display that appears in the top left corner of the screen.

The virtual display works as an actual display would work on a printer control panel, showing printer messages.

Checking the status of the printer

1 Type the printer IP address into the address field of your Web browser.

Administrative support 148

Page 149 of the Lexmark C 790 user manual — Restoring factory default settings
Page 149 · click to enlarge
Page 149

If you do not know the IP address of the printer, you can:

  • View the IP address on the printer control panel in the TCP/IP section under the Networks/Ports menu.
  • Print a network setup page or the menu settings pages and locate the IP address in the TCP/IP section.

2 Click Device Status.

The device status shows the following:

  • Paper tray settings
  • Level of toner in the print cartridge
  • Percentage of life remaining in the maintenance kit
  • Capacity measurements of certain printer parts

Setting up e ‑ mail alerts

Configure the printer to send you e‑mail alerts when the supplies are getting low or when the paper needs to be changed or added, or when there is a paper jam.

1 Type the printer IP address into the address field of your Web browser.

If you do not know the IP address of the printer, you can:

  • View the IP address on the printer control panel in the TCP/IP section under the Networks/Ports menu.
  • Print a network setup page or the menu settings pages and locate the IP address in the TCP/IP section.

2 Click Settings.

3 Under Other Settings, click E‑mail Alert Setup.

4 Select the items for notification, and type the e‑mail addresses.

5 Click Submit.

Viewing reports

You can view some reports from the Embedded Web Server. These reports are useful for assessing the status of the printer, network, and supplies.

1 Open a Web browser, and then type the printer IP address in the address field.

  • View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
  • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Reports, and then click the type of report you want to view.

Restoring factory default settings

If you want to retain a list of the current menu settings for reference, then print a menu settings page before restoring the factory default settings.

Administrative support 149

Page 150 of the Lexmark C 790 user manual — Setting up e-mail alerts
Page 150 · click to enlarge
Page 150

From the home screen, navigate to:

> Settings > General Settings > Factory Defaults > Restore Now >

Administrative support 150

Page 151 of the Lexmark C 790 user manual — Understanding jam numbers and locations
Page 151 · click to enlarge
Page 151

Clearing jams

Avoiding jams

Paper tray recommendations

  • Make sure the paper lies flat in the tray.
  • Do not remove a tray while the printer is printing.
  • Do not load a tray while the printer is printing. Load it prior to printing, or wait for a prompt to load it.
  • Do not load too much paper. Make sure the stack height does not exceed the indicated maximum height.
  • Make sure the guides in the tray or the multipurpose feeder are properly positioned and are not pressing too tightly against the paper or envelopes.
  • Push the tray in firmly after loading paper.

Paper recommendations

  • Use only recommended paper or specialty media.
  • Do not load wrinkled, creased, damp, bent, or curled paper.
  • Flex and straighten paper before loading it.
  • Do not use paper that has been cut or trimmed by hand.
  • Do not mix paper sizes, weights, or types in the same stack.
  • Make sure all sizes and types are set correctly in the printer control panel menus.
  • Store paper per manufacturer recommendations.

Understanding jam numbers and locations

When a jam occurs, a message indicating the jam location appears on the display. To resolve any paper jam message, you must clear all jammed paper from the paper path.

Clearing jams 151

Page 152 of the Lexmark C 790 user manual — Clearing jams
Page 152 · click to enlarge
Page 152
Lexmark C 790 — Clearing jams diagram (page 152)
Fig. 85 · Clearing jams

Area Jam numbers What to do

1 200‑239 Open side door, and then remove the jammed paper.

2 24x Open side door of the specified tray, and then remove the jammed paper.

3 250 Remove all paper from the multipurpose feeder, and then remove the jammed paper.

4 400‑403, 460‑461 Open the Horizontal Transport Unit (HTU) door, and then remove the jammed paper.

5 431‑458 Push the button to slide the finisher or mailbox to the right, open the finisher or mailbox door, and then remove the jammed paper.

6 455 Open staple door, remove the staple cartridge, and then remove the jammed staple.

Clearing jams 152

Page 153 of the Lexmark C 790 user manual — 201 paper jam
Page 153 · click to enlarge
Page 153

200 paper jam

1 Open the side door of the printer.

2 Firmly grasp the jammed paper, and then gently pull it out.

Lexmark C 790 — 200 paper jam diagram (page 153)
Fig. 86 · 200 paper jam

3 Close the side door of the printer.

4 From the printer control panel, touch Continue, jam cleared.

201 paper jam

1 Open the side door of the printer.

2 Determine where the jam is located, and then remove it: a If paper is inside the fuser unit, then open the fuser access door.

b Firmly grasp the jammed paper on each side, and then gently pull it out.

3 Close the side door of the printer.

4 From the printer control panel, touch Continue, jam cleared.

Clearing jams 153

Page 154 of the Lexmark C 790 user manual — Paper jam under the fuser
Page 154 · click to enlarge
Page 154

202–203 paper jams

If paper is visible in the standard exit bin, then firmly grasp the paper on each side, and then gently pull it out.

Lexmark C 790 — 202–203 paper jams diagram (page 154)
Fig. 87 · 202–203 paper jams

Paper jam in the fuser

1 Open the side door of the printer.

2 If paper is visible inside the fuser unit, then open the fuser access door.

3 Firmly grasp the jammed paper on each side, and then gently pull it out.

4 Close the side door.

Paper jam under the fuser

1 Open the side door of the printer.

2 If paper is visible under the fuser, then firmly grasp the jammed paper on each side, and then gently pull it out.

3 Close the side door of the printer.

4 From the printer control panel, touch Continue, jam cleared.

Clearing jams 154

Page 155 of the Lexmark C 790 user manual — 230 paper jam
Page 155 · click to enlarge
Page 155

230 paper jam

1 Open the side door of the printer.

2 Slide the latch to open the duplex cover.

Lexmark C 790 — 230 paper jam diagram (page 155)
Fig. 88 · 230 paper jam

3 Grasp the jammed paper, and then gently pull it out.

Lexmark C 790 — 230 paper jam diagram (page 155)
Fig. 89 · 230 paper jam

4 Close the duplex cover.

5 Close the side door of the printer.

6 From the printer control panel, touch Continue, jam cleared.

Clearing jams 155

Page 156 of the Lexmark C 790 user manual — Paper jam in Tray 1
Page 156 · click to enlarge
Page 156

231–239 paper jams

1 Open the side door of the printer.

2 Slide the latch to open the duplex cover.

Lexmark C 790 — 231–239 paper jams diagram (page 156)
Fig. 90 · 231–239 paper jams

3 Grasp the jammed paper, and then gently pull it out.

Lexmark C 790 — 231–239 paper jams diagram (page 156)
Fig. 91 · 231–239 paper jams

4 Close the duplex cover.

5 Close the side door of the printer.

6 From the printer control panel, touch Continue, jam cleared.

24x paper jam

Paper jam in Tray 1

1 Open the side door.

2 Grasp the jammed paper on each side, and then gently pull it out.

3 Close the side door.

4 From the printer control panel, touch Continue, jam cleared.

Clearing jams 156

Page 157 of the Lexmark C 790 user manual — 250 paper jam
Page 157 · click to enlarge
Page 157

Paper jam in the optional trays

1 Open the side door of the specified optional tray.

2 Grasp the jammed paper on each side, and then gently pull it out.

Lexmark C 790 — Paper jam in the optional trays diagram (page 157)
Fig. 92 · Paper jam in the optional trays

3 Close the side door.

4 From the printer control panel, touch Continue, jam cleared.

250 paper jam

1 Push the paper pick tab, and then remove all paper from the multipurpose feeder.

Lexmark C 790 — 250 paper jam diagram (page 157)
Fig. 93 · 250 paper jam

Clearing jams 157

Page 158 of the Lexmark C 790 user manual — 400–403 and 460–461 paper jams
Page 158 · click to enlarge
Page 158

2 Grasp the jammed paper on each side, and then gently pull it out.

Lexmark C 790 — 400–403 and 460–461 paper jams diagram (page 158)
Fig. 94 · 400–403 and 460–461 paper jams

3 Reload paper into the multipurpose feeder, and then adjust the paper guides.

4 From the printer control panel, touch Continue, jam cleared.

400–403 and 460–461 paper jams

1 Open the paper transport unit door.

Lexmark C 790 — 400–403 and 460–461 paper jams diagram (page 158)
Fig. 95 · 400–403 and 460–461 paper jams

2 Firmly grasp the jammed paper, and then gently pull it out.

3 Close the paper transport unit door.

4 From the printer control panel, touch Continue, jam cleared.

Clearing jams 158

Page 159 of the Lexmark C 790 user manual — 455 staple jam
Page 159 · click to enlarge
Page 159

431–454, and 456–458 paper jams

1 Push the button, and then slide the output finisher or mailbox to the right.

Lexmark C 790 — 431–454, and 456–458 paper jams diagram (page 159)
Fig. 96 · 431–454, and 456–458 paper jams

2 Open the finisher or mailbox access door.

Lexmark C 790 — 431–454, and 456–458 paper jams diagram (page 159)
Fig. 97 · 431–454, and 456–458 paper jams

3 Grasp the jammed paper, and then gently pull it out.

4 Close the finisher or mailbox access door.

5 Slide the finisher or mailbox to the left until it clicks in place.

6 From the printer control panel, touch Continue, jam cleared.

455 staple jam

1 Press the latch to open the stapler door.

Clearing jams 159

Page 160 of the Lexmark C 790 user manual — 431–454, and 456–458 paper jams
Page 160 · click to enlarge
Page 160
Lexmark C 790 — 431–454, and 456–458 paper jams diagram (page 160)
Fig. 98 · 431–454, and 456–458 paper jams

2 Lower the latch of the staple cartridge holder, and then pull the staple cartridge holder out of the printer.

Lexmark C 790 — 431–454, and 456–458 paper jams diagram (page 160)
Fig. 99 · 431–454, and 456–458 paper jams

3 Use the metal tab to lift the staple guard, and then remove any jammed or loose staples.

Lexmark C 790 — 431–454, and 456–458 paper jams diagram (page 160)
Fig. 100 · 431–454, and 456–458 paper jams

Clearing jams 160

Page 161 of the Lexmark C 790 user manual — 431–454, and 456–458 paper jams
Page 161 · click to enlarge
Page 161

4 Close the staple guard.

Lexmark C 790 — 431–454, and 456–458 paper jams diagram (page 161)
Fig. 101 · 431–454, and 456–458 paper jams

5 Press down on the staple guard until it clicks into place.

6 Push the staple cartridge holder firmly back into the stapler unit until the staple cartridge holder clicks into place.

Lexmark C 790 — 431–454, and 456–458 paper jams diagram (page 161)
Fig. 102 · 431–454, and 456–458 paper jams

7 Close the stapler door.

8 From the printer control panel, touch Continue, jam cleared.

Clearing jams 161

Page 162 of the Lexmark C 790 user manual — Change [paper source] to [custom type name] load [orientation]
Page 162 · click to enlarge
Page 162

Troubleshooting

Checking an unresponsive printer

If your printer is not responding, make sure:

  • The power cord is plugged into the printer and a properly grounded electrical outlet.
  • The electrical outlet is not turned off by any switch or breaker.
  • The printer is not plugged into any surge protectors, uninterrupted power supplies, or extension cords.
  • Other electrical equipment plugged into the outlet is working.
  • The printer is turned on.
  • The printer cable is securely attached to the printer and the host computer, print server, option, or other network device.

Once you have checked each of these possibilities, turn the printer off and then back on. This often fixes the problem.

Understanding the printer messages

Adjusting color

Wait for the process to complete.

An error has occurred with the USB drive. Please remove and reinsert drive.

Try one or more of the following:

  • Remove and reinsert the flash drive.
  • If the error message remains, the flash memory may be defective and require replacement.

Change [paper source] to [custom type name]

Try one or more of the following:

  • Touch Use current [paper source] to ignore the message and print from the selected tray.
  • Load the correct paper size and type in the tray, verify the paper size and type settings are specified in the printer control panel Paper menu, and then touch Paper changed, continue .
  • Touch Cancel job to cancel the print job.

Change [paper source] to [custom type name] load [orientation]

Try one or more of the following

  • Touch Use current [paper source] to ignore the message and print from the selected tray.
  • Load the correct paper size and type in the tray, verify the paper size and type settings are specified in the printer control panel Paper menu, and then touch Paper changed, continue .

Troubleshooting 162

Page 163 of the Lexmark C 790 user manual — Close left side door
Page 163 · click to enlarge
Page 163
  • Touch Cancel job to cancel the print job.

Change [paper source] to [custom string]

Try one or more of the following:

  • Touch Use current [paper source] to ignore the message and print from the selected tray.
  • Load the correct paper size and type in the tray, verify the paper size and type settings are specified in the printer control panel Paper menu, and then touch Paper changed, continue .
  • Touch Cancel job to cancel the print job.

Change [paper source] to [custom string] load [orientation]

Try one or more of the following:

  • Touch Use current [paper source] to ignore the message and print from the selected tray.
  • Load the correct paper size and type in the tray, verify the paper size and type settings are specified in the printer control panel Paper menu, and then touch Paper changed, continue .
  • Touch Cancel job to cancel the print job.

Change [paper source] to [paper size] [paper type]

Try one or more of the following:

  • Touch Use current [paper source] to ignore the message and print from the selected tray.
  • Load the correct paper size and type in the tray, verify the paper size and type settings are specified in the printer control panel Paper menu, and then touch Paper changed, continue .
  • Touch Cancel job to cancel the print job.

Change [paper source] to [paper size] [paper type] load [orientation]

Try one or more of the following:

  • Touch Use current [paper source] to ignore the message and print from the selected tray.
  • Load the correct paper size and type in the tray, verify the paper size and type settings are specified in the printer control panel Paper menu, and then touch Paper changed, continue .
  • Touch Cancel job to cancel the print job.

Close paper transport cover

Close the paper transport unit cover or door.

Close left side door

Close the left side door of the printer.

Troubleshooting 163

Page 164 of the Lexmark C 790 user manual — Empty the hole punch box
Page 164 · click to enlarge
Page 164

Close [tray] door

Close the specified tray door.

Close finisher side door

Close the side door of the finisher.

Close finisher top cover

Close the top cover of the finisher.

Close front door

Close the front door of the printer.

Disk corrupted

The printer attempted a hard disk recovery on a corrupted hard disk, and the hard disk cannot be repaired. The hard disk must be reformatted.

Touch Format disk to reformat the printer hard disk and clear the message.

Disk near full. Securely clearing disk space.

Try one or more of the following:

  • Touch Continue to clear the message and continue printing.
  • Delete fonts, macros, and other data stored on the printer hard disk.
  • Install a hard disk with higher capacity.

Disk problem

The printer hard disk must be reformatted.

Touch Format disk to reformat the printer hard disk and clear the message.

Empty the hole punch box

1 Empty the hole punch box.

For instructions on emptying the hole punch box, from the printer control panel touch More Information.

2 Reinsert the hole punch box into the finisher, and then touch Continue to clear the message.

Troubleshooting 164

Page 165 of the Lexmark C 790 user manual — Install envelope feeder
Page 165 · click to enlarge
Page 165

Error reading USB drive. Remove USB.

An unsupported USB device has been inserted. Remove the USB device, and then install a supported one.

Insert staple cartridge

Try one or more of the following:

  • Insert a staple cartridge.
  • Touch Continue to clear the message and print without using the staple finisher.

Insert Tray [x]

Insert the specified tray into the printer.

Insert the hole punch box

Insert the hole punch box into the finisher, and then touch Continue to clear the message.

Install bin [x]

Try one or more of the following:

  • Install the specified bin: 1 Turn the printer off. 2 Unplug the power cord from the wall outlet. 3 Install the specified bin. 4 Connect the power cord to a properly grounded electrical outlet. 5 Turn the printer back on.
  • Cancel the print job.

Install envelope feeder

Try one or more of the following:

  • Install the envelope feeder: 1 Turn the printer off. 2 Unplug the power cord from the wall outlet. 3 Install the envelope feeder. 4 Connect the power cord to a properly grounded electrical outlet. 5 Turn the printer back on.
  • Cancel the print job.

Troubleshooting 165

Page 166 of the Lexmark C 790 user manual — Load [src] with [size]
Page 166 · click to enlarge
Page 166

Install Tray [x]

Try one or more of the following:

  • Install the specified tray: 1 Turn the printer off. 2 Unplug the power cord from the wall outlet. 3 Install the specified tray. 4 Connect the power cord to a properly grounded electrical outlet. 5 Turn the printer back on.
  • Cancel the print job.

Load [src] with [custom type name]

Try one or more of the following:

  • Load the specified paper in the tray or feeder.
  • Touch Paper loaded, continue to clear the message and continue printing.

If the printer finds a tray that has the correct paper type and size, it feeds from that tray. If the printer cannot find a tray with the correct paper type and size, it prints from the default paper source. • Cancel the print job.

Load [src] with [custom string]

Try one or more of the following:

  • Load the specified paper in the tray or feeder.
  • Touch Paper loaded, continue to clear the message and continue printing.

If the printer finds a tray that has the correct paper type and size, it feeds from that tray. If the printer cannot find a tray with the correct paper type and size, it prints from the default paper source. • Cancel the print job.

Load [src] with [size]

Try one or more of the following:

  • Load the specified paper in the tray or feeder.
  • Touch Paper loaded, continue to clear the message and continue printing.

If the printer finds a tray that has the correct paper type and size, it feeds from that tray. If the printer cannot find a tray with the correct paper type and size, it feeds from the default paper source. • Cancel the print job.

Troubleshooting 166

Page 167 of the Lexmark C 790 user manual — Load staples
Page 167 · click to enlarge
Page 167

Load [src] with [type] [size]

Try one or more of the following:

  • Load the specified paper in the tray or feeder.
  • Touch Paper loaded, continue to clear the message and continue printing.

If the printer finds a tray that has the correct paper type and size, it feeds from that tray. If the printer cannot find a tray with the correct paper type and size, it feeds from the default paper source. • Cancel the print job.

Load Manual Feeder with [custom type name]

Try one or more of the following:

  • Load the specified paper in the manual feeder.
  • Touch Prompt each page, paper loaded or Do not prompt, paper loaded to clear the message and continue printing.
  • Touch Automatically select paper to use the paper loaded in the tray.
  • Cancel the print job.

Load Manual Feeder with [custom string]

Try one or more of the following:

  • Load the specified paper in the manual feeder.
  • Touch Prompt each page, paper loaded or Do not prompt, paper loaded to clear the message and continue printing.
  • Touch Automatically select paper to use the paper loaded in the tray.
  • Cancel the print job.

Load Manual Feeder with [paper type] [paper size]

Try one or more of the following:

  • Load the specified paper in the manual feeder.
  • Touch Prompt each page, paper loaded or Do not prompt, paper loaded to clear the message and continue printing.
  • Touch Automatically select paper to use the paper loaded in the tray.
  • Cancel the print job.

Load staples

Try one or more of the following:

  • Replace the specified staple cartridge in the finisher.
  • Touch Continue to clear the message and continue printing.

Troubleshooting 167

Page 168 of the Lexmark C 790 user manual — Reattach bin [x] – [y]
Page 168 · click to enlarge
Page 168

Paper changes needed

Try one or more of the following:

  • Touch Use current supplies to clear the message and continue printing.
  • Cancel the current print job.

Reattach bin [x]

Try one or more of the following:

  • Turn the printer off and then back on.
  • Reattach the specified bin: 1 Turn the printer off. 2 Unplug the power cord from the wall outlet. 3 Remove the specified bin. 4 Reattach the bin. 5 Connect the power cord to a properly grounded electrical outlet. 6 Turn the printer back on.
  • Remove the specified bin: 1 Turn the printer off. 2 Unplug the power cord from the wall outlet. 3 Remove the specified bin. 4 Contact Customer Support.
  • Touch Continue to clear the message and print without using the specified bin.

Reattach bin [x] – [y]

Try one or more of the following:

  • Turn the printer off and then back on.
  • Reattach the specified bins: 1 Turn the printer off. 2 Unplug the power cord from the wall outlet. 3 Remove the specified bins. 4 Reattach the bins. 5 Connect the power cord to a properly grounded electrical outlet. 6 Turn the printer back on.
  • Remove the specified bins: 1 Turn the printer off. 2 Unplug the power cord from the wall outlet. 3 Remove the specified bins. 4 Contact Customer Support.
  • Touch Continue to clear the message and print without using the specified bins.

Troubleshooting 168

Page 169 of the Lexmark C 790 user manual — Unsupported disk
Page 169 · click to enlarge
Page 169

Remove paper from standard output bin

Remove the stack of paper from the standard exit bin.

Remove paper from bin [x]

Remove the paper from the specified bin. The printer automatically senses paper removal and resumes printing.

If removing the paper does not clear the message, then touch Continue.

Remove paper from all bins

Output bins have reached their capacity. Remove paper from all output bins to clear the message and continue printing.

Remove paper from [linked set bin name]

Remove paper from the specified bin. The printer automatically detects paper removal and resumes printing.

If removing the paper does not clear the message, then touch Continue.

Remove packaging material, [area name]

Remove any remaining packaging material from the specified location.

Restore held jobs?

Try one or more of the following:

  • Touch Restore to restore all held jobs stored on the printer hard disk.
  • Touch Do not restore if you do not want any print jobs to be restored.

Slide finisher to the left

Slide the mailbox or finisher to the left until it clicks into place.

Some held jobs were not restored

Touch Continue to delete the specified job.

Supply needed to complete job

A supply needed to complete the job is missing. Touch Cancel to clear the message.

Unsupported disk

An unsupported disk has been inserted. Remove the unsupported disk, and then install a supported one.

Troubleshooting 169

Page 170 of the Lexmark C 790 user manual — 36 Printer service required
Page 170 · click to enlarge
Page 170

31.xx Missing or defective [color] cartridge

Try one or more of the following:

1 Remove and reinstall the specified print cartridge.

For instructions on removing a print cartridge, touch More Information.

2 Touch Continue to clear the message.

32.xx [color] cartridge part number unsupported by device

1 Remove the unsupported print cartridge, and then install a supported one.

For instructions on removing a print cartridge, touch More Information.

2 Touch Continue to clear the message.

34 Incorrect paper size, open [src]

Try one or more of the following:

  • Load the appropriate paper or specialty media in the proper tray.
  • Confirm that the wheel on tray 1 is set to the paper size loaded in the tray. Make sure this size is the size you are trying to print.
  • Touch Continue to clear the message and print using a different tray.
  • Check length and width guides of the tray and make sure the paper is properly loaded in the tray.
  • Make sure the Print Properties or Print dialog settings have the correct paper size and type.
  • Check that the paper size is correctly set. For example, if the MP Feeder Size is set to Universal, make sure the paper is large enough for the data being printed.
  • Cancel the print job.

35 Insufficient memory to support Resource Save feature

Try one or more of the following:

  • Touch Continue to disable Resource Save and continue printing.
  • To enable Resource Save after receiving this message, make sure the link buffers are set to Auto, and then exit the menus to activate the link buffer changes. When Ready appears, enable Resource Save.
  • Install additional memory.

36 Printer service required

Touch Continue to clear the message or contact customer support.

Troubleshooting 170

Page 171 of the Lexmark C 790 user manual — 40 [color] invalid refill, change cartridge
Page 171 · click to enlarge
Page 171

37 Insufficient memory to collate job

Try one or more of the following:

  • Touch Continue to print the portion of the job already stored and begin collating the rest of the print job.
  • Cancel the current print job.

37 Insufficient memory for Flash Memory Defragment operation

Try one or more of the following:

  • Touch Continue to stop the defragment operation and continue printing.
  • Delete fonts, macros, and other data in printer memory.
  • Install additional printer memory.

37 Insufficient memory, some Held Jobs were deleted

The printer deleted some held jobs in order to process current jobs.

Touch Continue to clear the message.

37 Insufficient memory, some held jobs will not be restored

The printer was unable to restore some or all of the confidential or held jobs on the printer hard disk.

Touch Continue to clear the message.

38 Memory full

Try one or more of the following:

  • Touch Continue to clear the message.
  • Cancel the current print job.
  • Install additional printer memory.

39 Complex page, some data may not have printed

Try one or more of the following:

  • Touch Continue to clear the message and continue printing.
  • Cancel the current print job.
  • Install additional printer memory.

40 [color] invalid refill, change cartridge

Replace the specified cartridge to continue printing.

Troubleshooting 171

Page 172 of the Lexmark C 790 user manual — 54 Network [x] software error
Page 172 · click to enlarge
Page 172

51 Defective flash detected

Try one or more of the following:

  • Touch Continue to clear the message and continue printing.
  • Cancel the current print job.

52 Not enough free space in flash memory for resources

Try one or more of the following:

  • Touch Continue to clear the message and continue printing.
  • Downloaded fonts and macros not previously stored in flash memory are deleted.
  • Delete fonts, macros, and other data stored in flash memory.
  • Upgrade to a larger capacity flash memory card.

53 Unformatted flash detected

Try one or more of the following:

  • Touch Continue to stop the defragment operation and continue printing.
  • Format the flash memory. If the error message remains, the flash memory may be defective and require replacing.

54 Serial option [x] error

Try one or more of the following:

  • Check that the serial cable is connected properly and is the correct one for the serial port.
  • Check that the serial interface parameters (protocol, baud, parity, and data bits) are set correctly on the printer and on the host computer.
  • Touch Continue to continue printing.
  • Turn the printer power off and then back on to reset the printer.

54 Standard network software error

Try one or more of the following:

  • Touch Continue to continue printing.
  • Turn the printer off and then back on to reset the printer.
  • Upgrade (flash) the network firmware in the printer or print server.

54 Network [x] software error

Try one or more of the following:

  • Touch Continue to continue printing.
  • Turn the printer off, wait for about 10 seconds, and then turn the printer back on.
  • Upgrade (flash) the network firmware in the printer.

Troubleshooting 172

Page 173 of the Lexmark C 790 user manual — 56 USB port [x] disabled
Page 173 · click to enlarge
Page 173

55 Unsupported option in slot [x]

1 Turn the printer off.

2 Unplug the power cord from the wall outlet.

3 Remove the unsupported option card from the printer system board, and then replace it with a supported card.

4 Connect the power cord to a properly grounded electrical outlet.

5 Turn the printer back on.

56 Parallel port [x] disabled

Try one or more of the following:

  • Touch Continue to clear the message.

The printer discards any data received through the parallel port. • Make sure the Parallel Buffer menu item is not set to Disabled.

56 Serial port [x] disabled

Try one or more of the following:

  • Touch Continue to clear the message.

The printer discards any data received through the serial port. • Make sure the Serial Buffer menu is not set to Disabled.

56 Standard USB port disabled

Try one or more of the following:

  • Touch Continue to clear the message.

The printer discards any data received through the USB port. • Make sure the USB Buffer menu item is not set to Disabled.

56 Standard parallel port disabled

Try one or more of the following:

  • Touch Continue to clear the message.

The printer discards any data received through the parallel port. • Make sure the Parallel Buffer menu item is not set to Disabled.

56 USB port [x] disabled

Try one or more of the following:

  • Touch Continue to clear the message.

The printer discards any data received through the USB port. • Make sure the USB Buffer menu is not set to Disabled.

Troubleshooting 173

Page 174 of the Lexmark C 790 user manual — 58 Too many flash options installed
Page 174 · click to enlarge
Page 174

57 Configuration change, some held jobs were not restored

Something has changed in the printer to invalidate the held jobs. Possible changes include:

  • The printer firmware has been updated.
  • Paper input options needed for the print job were removed.
  • The print job was created using data from a device in the USB port and the device is no longer in the USB port.
  • The printer hard disk contains print jobs that were stored while installed in a different printer model.

Touch Continue to clear the message.

58 Input config error

1 Turn the printer off.

2 Unplug the power cord from the wall outlet.

3 Check if all tray configurations are correct. Remove unnecessary trays if needed.

4 Connect the power cord to a properly grounded electrical outlet.

5 Turn the printer back on.

58 Too many bins attached

1 Turn the printer off.

2 Unplug the power cord from the wall outlet.

3 Remove the additional bins.

4 Connect the power cord to a properly grounded electrical outlet.

5 Turn the printer back on.

58 Too many disks installed

1 Turn the printer off.

2 Unplug the power cord from the wall outlet.

3 Remove the excess disks.

4 Connect the power cord to a properly grounded electrical outlet.

5 Turn the printer back on.

58 Too many flash options installed

1 Turn the printer off.

2 Unplug the power cord from the wall outlet.

3 Remove the excess flash memory.

Troubleshooting 174

Page 175 of the Lexmark C 790 user manual — 80.xx Fuser life warning
Page 175 · click to enlarge
Page 175

4 Connect the power cord to a properly grounded outlet.

5 Turn the printer back on.

58 Too many trays attached

1 Turn the printer off.

2 Unplug the power cord from the wall outlet.

3 Remove the additional trays.

4 Connect the power cord to a properly grounded outlet.

5 Turn the printer back on.

59 Incompatible output bin [x]

Try one or more of the following:

  • Remove the specified output bin.
  • Touch Continue to clear the message and continue printing without using the specified output bin.

61 Remove defective disk

Try one or more of the following:

  • Remove the defective printer hard disk.
  • Install a different printer hard disk before performing any operations that require a printer hard disk.

62 Disk full

Try one or more of the following:

  • Touch Continue to clear the message and continue processing.
  • Delete fonts, macros, and other data stored on the printer hard disk.
  • Install a printer hard disk with larger capacity.

80.xx Fuser near life warning

1 Order a replacement fuser immediately.

2 When print quality is reduced, install the new fuser, following the instruction sheet that came with the replacement part.

3 Touch Continue to clear the message and continue printing.

80.xx Fuser life warning

  • Order a replacement fuser immediately. When print quality is reduced, install the new fuser, following the instruction sheet that came with the replacement part.
  • Touch Continue to clear the message and continue printing.

Troubleshooting 175

Page 176 of the Lexmark C 790 user manual — 88.xx [color] cartridge nearly low
Page 176 · click to enlarge
Page 176

80.xx Replace fuser

Replace the fuser using the instruction sheet that came with the replacement part.

80.xx Fuser missing

1 Replace the fuser, following the instruction sheet that came with the replacement part.

2 Touch Continue to clear the message and continue printing.

82.xx Waste toner bottle nearly full

Order a replacement waste toner bottle immediately.

1 Replace the waste toner bottle.

For instructions on installing the waste toner bottle, from the printer control panel touch More Information.

2 Touch Continue to clear the message and continue printing.

82.xx Replace waste toner bottle

1 Replace the waste toner bottle.

For instructions on replacing the waste toner bottle, from the printer control panel touch More Information.

2 Touch Continue to clear the message and continue printing.

82.xx Waste toner bottle missing

Reinsert the waste toner bottle into the printer.

83.xx Transfer module life warning

1 Replace the transfer module, following the instruction sheet that came with the replacement part.

2 Touch Continue to clear the message and continue printing.

83.xx Transfer module missing

Insert the transfer module into the printer.

83.xx Replace transfer module

Replace the transfer module, following the instruction sheet that came with the replacement part.

88.xx [color] cartridge nearly low

Order a replacement for the specified print cartridge.

Troubleshooting 176

Page 177 of the Lexmark C 790 user manual — Multiple ‑ language PDF files do not print
Page 177 · click to enlarge
Page 177

88.xx [color] cartridge low

1 Remove the specified cartridge.

2 Firmly shake the cartridge side‑to‑side and front‑to‑back several times to redistribute the toner.

3 Reinsert the cartridge, and then touch Continue to clear the message and continue printing.

  • Repeat this procedure multiple times until the print remains faded. When the print remains faded, replace the cartridge.
  • Have a new cartridge available when the current one no longer prints satisfactorily.

88.xx [Color] cartridge very low

The specified print cartridge is very low.

1 For instructions on replacing a print cartridge, from the printer control panel touch More Information.

2 Touch Continue to clear the message and continue printing.

88.xx [Color] cartridge critically low

The specified print cartridge is critically low.

1 For instructions on replacing a print cartridge, from the printer control panel touch More Information.

2 Touch Continue to clear the message and continue printing.

1565 Emulation error, load emulation option

The printer automatically clears the message in 30 seconds and then disables the download emulator on the firmware card.

To fix this, download the correct download emulator version from the Lexmark Web site at www.lexmark.com.

Solving printing problems

Multiple ‑ language PDF files do not print

The PDF files may contain unavailable fonts.

1 Open the document you want to print in Adobe Acrobat.

2 Click the printer icon > Advanced > Print as image > OK > OK.

Troubleshooting 177

Page 178 of the Lexmark C 790 user manual — M AKE SURE THE INTERNAL PRINT SERVER IS WORKING PROPERLY
Page 178 · click to enlarge
Page 178

Printer control panel display is blank or displays only diamonds

The printer self test failed. Turn the printer off, wait about 10 seconds, and then turn the printer back on.

If Performing Self Test and Ready do not appear, turn the printer off and contact Customer Support.

Error message about reading USB drive appears

Make sure the flash drive is supported.

Print jobs do not print

Try one or more of the following:

M AKE SURE THERE IS NO PROBLEM WITH YOUR PRINTER

From the printer control panel, check the status. If necessary, follow the recovery instructions.

M AKE SURE THE PRINTER IS READY TO PRINT

Make sure Ready appears on the display before sending a print job.

C HECK IF A SUPPLY IS MISSING OR NEEDS REPLACEMENT

Remove and then reinstall or replace the supply.

C HECK IF THE STANDARD EXIT BIN IS FULL

Remove the paper stack from the standard exit bin.

C HECK IF THE PAPER TRAY IS EMPTY

Load paper in the tray.

M AKE SURE THE CORRECT PRINTER SOFTWARE IS INSTALLED

  • Verify that you are using the correct printer software.
  • If the printer is connected to your computer through a USB port, then make sure you are running a supported operating system and using a compatible printer software.

M AKE SURE THE INTERNAL PRINT SERVER IS WORKING PROPERLY

  • Make sure the internal print server is properly installed and that the printer is connected to the network.
  • Print a network setup page and check that the status shows Connected . If the status is Not Connected , then check the network cables, and then try printing the network setup page again. Contact your system support person to make sure the network is functioning correctly.

The printer software is available on the Lexmark Web site at http://support.lexmark.com.

Troubleshooting 178

Page 179 of the Lexmark C 790 user manual — C HANGE THE ENVIRONMENTAL SETTINGS
Page 179 · click to enlarge
Page 179

MAKE SURE YOU ARE USING A RECOMMENDED USB, SERIAL, OR ETHERNET CABLE

For more information, visit the Lexmark Web site at http://support.lexmark.com.

M AKE SURE PRINTER CABLES ARE SECURELY CONNECTED

Check the cable connections to the printer and print server to make sure they are secure.

For more information, see the setup documentation that came with the printer.

Confidential and other held jobs do not print

These are possible solutions. Try one or more of the following:

P ARTIAL JOB , NO JOB , OR BLANK PAGE PRINTS

The print job may contain a formatting error or invalid data.

  • Delete the print job, and then print it again.
  • For PDF documents, recreate the PDF and then print it again.

If you are printing from the Internet, then the printer may be reading multiple job titles as duplicates and deleting all jobs except the first one.

  • For Windows users, open Print Properties. From the Print and Hold dialog, select the "Keep duplicate documents" check box under the User name text box before entering a PIN number.
  • For Macintosh users, save each print job, naming each job differently, and then send the individual jobs to the printer.

M AKE SURE THE PRINTER HAS SUFFICIENT MEMORY

Free up additional printer memory by scrolling through the list of held jobs and deleting some of them.

Print job takes longer than expected

Try one or more of the following:

R EDUCE THE COMPLEXITY OF THE PRINT JOB

Eliminate the number and size of fonts, the number and complexity of images, and the number of pages in the print job.

T URN OFF THE P AGE P ROTECT SETTING

From the home screen, navigate to:

> Settings > General Settings > Print Recovery > Page Protect > Off >

C HANGE THE ENVIRONMENTAL SETTINGS

When using Eco‑Mode or Quiet Mode settings, you may notice a reduction in performance.

Troubleshooting 179

Page 180 of the Lexmark C 790 user manual — R EDUCE THE COMPLEXITY OF THE PRINT JOB
Page 180 · click to enlarge
Page 180

Job prints from the wrong tray or on the wrong paper

C HECK THE PAPER TYPE AND PAPER SIZE SETTINGS

Make sure the paper type setting matches the paper loaded in the tray:

1 From the printer control panel Paper menu, check the paper type and paper size settings.

  • 2 Before sending the job to print, specify the correct type setting:
  • For Windows users, specify the paper type from Print Properties.
  • For Macintosh users, specify the paper type from the Print dialog.

Incorrect characters print

  • Make sure the printer is not in Hex Trace mode. If Ready Hex appears on the display, you must exit Hex Trace mode before you can print your job. Turn the printer off and back on to exit Hex Trace mode.
  • Make sure the SmartSwitch settings are set to On in the Network and USB menus.

Tray linking does not work

These are possible solutions. Try one or more of the following:

L OAD THE SAME SIZE AND TYPE OF PAPER

  • Load the same size and type of paper in each tray to be linked.
  • Move the paper guides to the correct positions for the paper size loaded in each tray.

USE THE SAME PAPER SIZE AND PAPER TYPE SETTINGS

  • Print a menu settings page and compare the settings for each tray.
  • If necessary, adjust the settings from the Paper Size/Type menu.

Large jobs do not collate

These are possible solutions. Try one or more of the following:

M AKE SURE C OLLATE IS SET TO O N

From the Finishing menu or Print Properties, set Collate to On.

R EDUCE THE COMPLEXITY OF THE PRINT JOB

Reduce the complexity of the print job by eliminating the number and size of fonts, the number and complexity of images, and the number of pages in the job.

Troubleshooting 180

Page 181 of the Lexmark C 790 user manual — R ESET THE PRINTER
Page 181 · click to enlarge
Page 181

M AKE SURE THE PRINTER HAS ENOUGH MEMORY

Add printer memory or an optional hard disk.

Unexpected page breaks

I NCREASE THE P RINT T IMEOUT VALUE

1 From the home screen, navigate to:

> Settings > General Settings > Timeouts > Print Timeout

2 Increase the Print Timeout value, and then touch

Solving home screen application problems

An application error has occurred

C HECK THE SYSTEM LOG FOR RELEVANT DETAILS

1 Type the printer IP address or host name in the address field of your Web browser.

If you do not know the IP address or host name of the printer, then you can:

  • View the information on the printer control panel home screen, or in the TCP/IP section under the Networks/Ports menu.
  • Print a network setup page or menu settings page and locate the information in the TCP/IP section.

2 Click Settings or Configuration.

3 Click Device Solutions > Solutions (eSF) > System tab > Log.

4 From the Filter menu, select an application status.

5 From the Application menu, select an application, and then click Submit.

C ONTACT CUSTOMER SUPPORT

If you still cannot isolate the problem, then contact customer support.

Solving option problems

Option does not operate correctly or quits after it is installed

These are possible solutions. Try one or more of the following:

R ESET THE PRINTER

Turn the printer off, wait for about 10 seconds, and then turn the printer on.

Troubleshooting 181

Page 182 of the Lexmark C 790 user manual — 2,000-sheet drawer problems
Page 182 · click to enlarge
Page 182

C HECK TO SEE IF THE OPTION IS CONNECTED TO THE PRINTER

1 Turn the printer off.

2 Unplug the printer.

3 Check the connection between the option and the printer.

M AKE SURE THE OPTION IS INSTALLED

Print a menu settings page and check to see if the option is listed in the Installed Options list. If the option is not listed, reinstall it.

M AKE SURE THE OPTION IS AVAILABLE IN THE PRINTER DRIVER

It may be necessary to manually add the option in the printer driver to make it available for print jobs. For more information, see “Adding available options in the print driver” on page 44.

M AKE SURE THE OPTION IS SELECTED

From the program you are using, select the option. Mac OS 9 users should make sure the printer is set up in the Chooser.

Paper tray problems

Try one or more of the following:

M AKE SURE THE PAPER IS LOADED CORRECTLY

1 Open the paper tray.

2 Check for paper jams or misfeeds.

3 Make sure the paper guides are aligned against the edges of the paper.

4 Make sure the paper tray closes properly.

R ESET THE PRINTER

Turn the printer off, wait about 10 seconds, and then turn the printer on.

M AKE SURE THE PAPER TRAY IS INSTALLED CORRECTLY

If the paper tray is listed on the menu settings page, but paper jams when it enters or exits the tray, then it may not be properly installed. Reinstall the paper tray. For more information, see the hardware setup documentation that came with the paper tray, or go to http://support.lexmark.com to view the paper tray instruction sheet.

2,000-sheet drawer problems

C HECK THE DRAWER CONNECTION

Make sure the 2,000‑sheet drawer is properly connected to the printer.

Troubleshooting 182

Page 183 of the Lexmark C 790 user manual — M AKE SURE THE NETWORK SOFTWARE IS CONFIGURED CORRECTLY
Page 183 · click to enlarge
Page 183

L OAD PAPER

If the tray is empty, then load paper in the tray or feeder

C LEAR ANY JAMS

Open the side door of the tray or feeder, and then remove any jammed paper.

A VOID PAPER JAMS

  • Flex the paper.
  • Make sure the drawer is properly installed.
  • Make sure paper is loaded correctly.
  • Make sure the paper stack you load does not exceed the maximum stack height indicated in the tray.
  • Make sure the paper or specialty media meets specifications and is not damaged.
  • Make sure the guides are positioned correctly for the paper size loaded.

Cannot detect flash memory card

Make sure the flash memory card is securely connected to the printer system board.

Cannot detect printer hard disk

Make sure the printer hard disk is securely connected to the printer system board.

Internal Solutions Port does not operate correctly

Try one or more of the following:

C HECK THE I NTERNAL S OLUTIONS P ORT (ISP) CONNECTIONS

Make sure the ISP is securely connected to the printer system board.

C HECK THE CABLE

Make sure you are using the correct cable and that it is securely connected to the Internal Solutions (ISP) port.

M AKE SURE THE NETWORK SOFTWARE IS CONFIGURED CORRECTLY

For information on installing the network printing software, see the Networking Guide on the Software and Documentation CD.

Troubleshooting 183

Page 184 of the Lexmark C 790 user manual — C HECK THE PAPER
Page 184 · click to enlarge
Page 184

Internal print server does not operate correctly

Try one or more of the following:

C HECK THE PRINT SERVER CONNECTIONS

  • Make sure the internal print server is attached securely to the printer system board.
  • Make sure you are using the correct cable and that it is securely connected.

M AKE SURE THE NETWORK SOFTWARE IS CONFIGURED CORRECTLY

For more information on installing the network printing software, do the following:

1 Open the Software and Documentation CD.

2 Click Additional.

3 Under Publications on this CD, select Networking Guide.

Memory card

Make sure the memory card is securely connected to the printer system board.

USB/parallel interface card does not operate correctly

C HECK THE USB/ PARALLEL INTERFACE CARD CONNECTION

Make sure the USB/parallel interface card is securely connected to the printer system board.

C HECK THE CABLE

Make sure you are using the correct cable and that it is securely connected.

Solving paper feed problems

Paper frequently jams

These are possible solutions. Try one or more of the following:

C HECK THE PAPER

Use recommended paper and specialty media. For more information, see the chapter about paper and specialty media guidelines.

MAKE SURE THERE IS NOT TOO MUCH PAPER IN THE PAPER TRAY

Make sure the stack of paper you load does not exceed the maximum stack height indicated in the tray or on the multipurpose feeder.

Troubleshooting 184

Page 185 of the Lexmark C 790 user manual — Printer is printing blank pages
Page 185 · click to enlarge
Page 185

C HECK THE PAPER GUIDES

Move the guides in the tray to the correct positions for the paper size loaded.

T HE PAPER MAY HAVE ABSORBED MOISTURE DUE TO HIGH HUMIDITY

  • Load paper from a fresh package.
  • Store paper in its original wrapper until you use it.

Paper jam message remains after jam is cleared

C HECK THE PAPER PATH

The paper path is not clear. Clear jammed paper from the entire paper path, and then touch Continue.

Jammed pages are not reprinted

T URN ON J AM R ECOVERY

1 From the home screen, navigate to:

> Settings > General Settings > Print Recovery

2 Touch the arrows next to Jam Recovery until On or Auto appears.

Solving print quality problems

If the solutions here do not correct the problem, contact customer support. You may have a printer part that requires adjustment or replacement.

Printer is printing blank pages

Try one or more of the following:

MAKE SURE THERE IS NO PACKING MATERIAL LEFT ON THE TONER OR PRINT CARTRIDGE

Remove the cartridge and make sure the packing material is properly removed. Reinstall the cartridge.

Troubleshooting 185 · 3 Touch

Page 186 of the Lexmark C 790 user manual — C HECK THE PAPER SIZE SETTING
Page 186 · click to enlarge
Page 186

MAKE SURE THE TONER OR PRINT CARTRIDGE IS NOT LOW ON TONER

When 88.xx [color] cartridge low appears, make sure that toner is distributed evenly among all four cartridges:

1 Remove the cartridge.

2 Firmly shake the cartridge side-to-side and front-to-back several times to redistribute the toner.

3 Reinsert the cartridge.

If the problem continues, then the printer may need to be serviced. For more information, contact customer support.

Characters have jagged or uneven edges

If you are using downloaded fonts, verify that the fonts are supported by the printer, the host computer, and the software program.

Clipped images

Try one or more of the following:

C HECK THE GUIDES

Move the width and length guides in the tray to the correct positions for the paper size loaded.

C HECK THE PAPER SIZE SETTING

Make sure the paper size setting matches the paper loaded in the tray:

1 From the printer control panel Paper menu, check the Paper Size setting.

  • 2 Before sending the job to print, specify the correct size setting:
  • For Windows users, specify the size from Print Properties.
  • For Macintosh users, specify the size from the Page Setup dialog.

Troubleshooting 186

Page 187 of the Lexmark C 790 user manual — M AKE SURE THE PRINT CARTRIDGE IS NOT LOW ON TONER
Page 187 · click to enlarge
Page 187

Fine horizontal lines appear on color pages

You may notice fine, horizontal lines in photographs or pages with a high concentration of color. This can occur when the printer is in Quiet Mode. To fix this, set Quiet Mode to Off (Image/Photo).

Shadow images appear on prints

Try one or more of the following:

C HECK THE PAPER TYPE AND WEIGHT SETTINGS

Make sure the paper type and weight settings match the paper loaded in the tray or feeder:

1 From the printer control panel Paper menu, check the Paper Type and Paper Weight settings.

  • 2 Before sending the print job, specify the correct paper type setting:
  • For Windows users, specify the paper type from Print Properties.
  • For Macintosh users, specify the paper type from the Print dialog.

M AKE SURE THE PRINT CARTRIDGE IS NOT LOW ON TONER

When 88.xx [color] cartridge low appears, make sure that toner is distributed evenly among all four print cartridges or whichever color has the shadow images.

1 Remove the print cartridge.

2 Firmly shake the cartridge side-to-side and front-to-back several times to redistribute the toner.

3 Reinsert the print cartridge.

If the problem continues, the printer may need to be serviced. For more information, contact customer support.

Troubleshooting 187

Page 188 of the Lexmark C 790 user manual — C HECK THE PAPER SIZE SETTING
Page 188 · click to enlarge
Page 188

Gray background on prints

ABCDE

ABCDE ABCDE

M AKE SURE THERE IS NO WORN OR DEFECTIVE PRINT CARTRIDGE

Replace the worn or defective print cartridge.

Incorrect margins

ABCD ABCD ABCD

These are possible solutions. Try one or more of the following:

C HECK THE PAPER GUIDES

Move the guides in the tray to the correct positions for the paper size loaded.

C HECK THE PAPER SIZE SETTING

Make sure the paper size setting matches the paper loaded in the tray:

1 From the printer control panel Paper menu, check the Paper Size setting.

  • 2 Before sending the job to print, specify the correct size setting:
  • For Windows users, specify the size from Print Properties.
  • For Macintosh users, specify the size from the Page Setup dialog.

Troubleshooting 188

Page 189 of the Lexmark C 790 user manual — Print irregularities
Page 189 · click to enlarge
Page 189

Light colored line, white line, or incorrectly colored line appears on prints

ABCDE ABCDE

ABCDE ABCDE ABCDE

Try one or more of the following:

M AKE SURE THERE IS NO DEFECTIVE PRINT CARTRIDGE

Replace the defective print cartridge.

M AKE SURE THE TRANSFER BELT IS NOT DEFECTIVE

Replace the defective transfer belt. For more information, see the instruction sheet that came with the replacement part.

Paper curl

Try one or more of the following:

C HECK THE PAPER TYPE AND WEIGHT SETTINGS

Make sure the paper type and weight settings match the paper loaded in the tray or feeder:

1 From the printer control panel Paper menu, check the Paper Type and Paper Weight settings.

  • 2 Before sending the print job, specify the correct paper type setting:
  • For Windows users, specify the paper type from Print Properties.
  • For Macintosh users, specify the paper type from the Print dialog.

L OAD PAPER FROM A FRESH PACKAGE

Paper absorbs moisture due to high humidity. Store paper in its original wrapper until you use it.

Print irregularities

Try one or more of the following:

Troubleshooting 189

Page 190 of the Lexmark C 790 user manual — A VOID TEXTURED PAPER WITH ROUGH FINISHES
Page 190 · click to enlarge
Page 190

L OAD PAPER FROM A FRESH PACKAGE

The paper may have absorbed moisture due to high humidity. Store paper in its original wrapper until you use it.

C HECK THE PAPER TYPE AND WEIGHT SETTINGS

Make sure the paper type and weight settings match the paper loaded in the tray or feeder:

1 From the printer control panel Paper menu, check the Paper Type and Paper Weight settings.

  • 2 Before sending the print job, specify the correct paper type setting:
  • For Windows users, specify the paper type from Print Properties.
  • For Macintosh users, specify the paper type from the Print dialog.

A VOID TEXTURED PAPER WITH ROUGH FINISHES

M AKE SURE THERE IS NO DEFECTIVE PRINT CARTRIDGE

Replace the worn or defective print cartridge.

M AKE SURE THE TRANSFER BELT IS NOT DEFECTIVE

Replace the defective transfer belt. For more information, see the instruction sheet that came with the replacement part.

M AKE SURE THE FUSER IS NOT DEFECTIVE

Replace the defective fuser. For more information, see the instruction sheet that came with the replacement part.

Print is too dark

Try one or more of the following:

L OAD PAPER FROM A FRESH PACKAGE

The paper may have absorbed moisture due to high humidity. Store paper in its original wrapper until you use it.

A VOID TEXTURED PAPER WITH ROUGH FINISHES

Troubleshooting 190

Page 191 of the Lexmark C 790 user manual — M AKE SURE THE PRINT CARTRIDGE IS NOT LOW ON TONER
Page 191 · click to enlarge
Page 191

C HECK THE P APER T YPE SETTING

Make sure the Paper Type setting matches the paper loaded in the tray or feeder:

  • From the printer control panel Paper menu, check the Paper Type setting.
  • For Windows users, check this setting from Print Properties.
  • For Macintosh users, check this setting from the Print dialog.

M AKE SURE THERE IS NO DEFECTIVE PRINT CARTRIDGE

Replace the defective print cartridge.

Print is too light

Try one or more of the following:

L OAD PAPER FROM A FRESH PACKAGE

The paper may have absorbed moisture from high humidity. Store paper in its original wrapper until you use it.

A VOID TEXTURED PAPER WITH ROUGH FINISHES

C HECK THE P APER T YPE SETTING

Make sure the Paper Type setting matches the paper loaded in the tray or feeder:

  • From the printer control panel Paper menu, check the Paper Type setting.
  • For Windows users, check this setting from Print Properties.
  • For Macintosh users, check this setting from the Print dialog.

M AKE SURE THE PRINT CARTRIDGE IS NOT LOW ON TONER

When 88.xx [color] cartridge low appears, make sure the toner is distributed evenly within the print cartridge.

1 Remove the print cartridge.

2 Firmly shake the cartridge side-to-side and front-to-back several times to redistribute the toner.

Troubleshooting 191

Page 192 of the Lexmark C 790 user manual — C HECK THE PAPER GUIDES
Page 192 · click to enlarge
Page 192

3 Reinsert the print cartridge.

If the problem continues, then the printer may need to be serviced. For more information, contact customer support.

M AKE SURE THERE IS NO DEFECTIVE PRINT CARTRIDGE

Replace the defective print cartridge.

Repeating defects appear on prints

Try one or more of the following:

R EPLACE THE PRINT CARTRIDGE

Replace the print cartridge of the color with the repeating defect, if the print defects occur in the following instances:

  • in every 37.7 mm (1.48 in.) of the page
  • in every 41.6 mm (1.64 in.) of the page
  • in every 42.7 mm (1.68 in.) of the page
  • in every 94.3 mm (3.71 in.) of the page

R EPLACE THE FUSER

Replace the fuser if print defects occur in the following instances:

  • in every 95.0 mm (3.74 in.) of the page
  • in every 146.7 mm (5.78 in.) of the page

Skewed print

These are possible solutions. Try one or more of the following:

C HECK THE PAPER GUIDES

Move the length and width guides in the tray to the correct positions for the paper size loaded.

  • Make sure the guides are not too far from the paper stack.
  • Make sure the guides are not pressing too lightly against the paper stack.

Troubleshooting 192

Page 193 of the Lexmark C 790 user manual — C HECK THE PAPER TYPE
Page 193 · click to enlarge
Page 193

C HECK THE PAPER

Make sure you are using paper that meets the printer specifications.

Solid color or black pages appear on prints

MAKE SURE THE PRINT CARTRIDGES ARE INSTALLED CORRECTLY, ARE NOT DEFECTIVE AND NOT LOW ON TONER

  • Remove the print cartridges.

Black or white streaks appear on transparencies or paper

Try one or more of the following:

E NSURE THAT THE FILL PATTERN IS CORRECT

If the fill pattern is incorrect, choose a different fill pattern from your software program.

C HECK THE PAPER TYPE

  • Use only the recommended transparencies.
  • Ensure that the Paper Type setting matches what is loaded in the tray or feeder.
  • Ensure that the Paper Texture setting is correct for the type of paper or specialty media loaded in the tray or feeder.

Troubleshooting 193

Page 194 of the Lexmark C 790 user manual — M AKE SURE THE TRANSFER BELT IS NOT WORN OR DEFECTIVE
Page 194 · click to enlarge
Page 194

M AKE SURE THE PRINT CARTRIDGE IS NOT LOW ON TONER

When 88.xx [color] cartridge low appears, make sure the toner is distributed evenly within the print cartridge:

1 Remove the print cartridge.

2 Firmly shake the cartridge side-to-side and front-to-back several times to redistribute the toner.

3 Reinsert the print cartridge.

If the problem continues, the printer may need to be serviced. For more information, contact Customer Support.

Streaked horizontal lines appear on prints

ABCDE ABCDE ABCDE

Try one or more of the following:

S ELECT ANOTHER TRAY OR FEEDER

  • From the printer control panel Paper Menu, select Default Source.
  • For Windows users, select the paper source from Print Properties.
  • For Macintosh users, select the paper source from the Print dialog and pop ‑ up menus.

MAKE SURE THERE IS NO WORN, DEFECTIVE, OR EMPTY PRINT CARTRIDGE

Replace the worn, defective, or empty print cartridge.

Toner fog or background shading appears on a page

Try one or more of the following:

M AKE SURE PRINT CARTRIDGES ARE INSTALLED CORRECTLY AND ARE NOT DEFECTIVE

Reinstall or replace the print cartridge.

M AKE SURE THE TRANSFER BELT IS NOT WORN OR DEFECTIVE

Replace the transfer belt. For more information, see the instruction sheet that came with the replacement part.

Troubleshooting 194

Page 195 of the Lexmark C 790 user manual — M AKE SURE THE FUSER IS NOT WORN OR DEFECTIVE
Page 195 · click to enlarge
Page 195

M AKE SURE THE FUSER IS NOT WORN OR DEFECTIVE

Replace the fuser. For more information, see the instruction sheet that came with the replacement part.

M AKE SURE THERE IS NO TONER IN THE PAPER PATH

Clean any visible toner from the paper path. If the problem persists, then contact customer support.

R ECALIBRATE THE PRINTER

Perform color adjust from the printer control panel Quality menu.

C HECK THE SOFTWARE PROGRAM OR APPLICATION

The software program or application may have specified an off‑white background.

Toner rubs off

Try one or more of the following:

C HECK THE PAPER TYPE AND WEIGHT SETTINGS

Make sure the paper type and weight settings match the paper loaded in the tray or feeder:

1 From the printer control panel Paper menu, check the Paper Type and Paper Weight settings. Change the Paper Weight setting from Normal to Heavy.

  • 2 Before sending the print job, specify the correct paper type setting:
  • For Windows users, specify the paper type from Print Properties.
  • For Macintosh users, specify the paper type from the Print dialog.

C HECK THE PAPER TEXTURE SETTING

From the printer control panel Paper menu, make sure the Paper Texture setting matches the paper loaded in the tray or feeder. If necessary, change the Paper Texture setting from Normal to Rough.

M AKE SURE THE FUSER IS NOT WORN OR DEFECTIVE

Replace the worn or defective fuser. For more information, see the instruction sheet that came with the replacement part.

Troubleshooting 195

Page 196 of the Lexmark C 790 user manual — FAQ about color printing
Page 196 · click to enlarge
Page 196

Transparency print quality is poor

Try one or more of the following:

C HECK THE TRANSPARENCIES

Use only transparencies that meet the printer specifications.

C HECK THE PAPER TYPE SETTING

Make sure the paper type setting is set to Transparency:

1 From the printer control panel Paper menu, check the Paper Type setting.

  • 2 Before sending the job to print, specify the correct type setting:
  • For Windows users, specify the type from Print Properties.
  • For Macintosh users, specify the type from the Print dialog.

Uneven print density

ABCDE ABCDE ABCDE

M AKE SURE THERE IS NO DEFECTIVE OR WORN PRINT CARTRIDGE

Replace the worn or defective print cartridge.

Solving color quality problems

This section helps answer some basic color‑related questions and describes how some of the features provided in the Quality Menu can be used to solve typical color problems.

FAQ about color printing

What is RGB color?

Red, green, and blue light can be added together in various amounts to produce a large range of colors observed in nature. For example, red and green can be combined to create yellow. Televisions and computer monitors create colors in this manner. RGB color is a method of describing colors by indicating the amount of red, green, or blue needed to produce a certain color.

Troubleshooting 196

Page 197 of the Lexmark C 790 user manual — Transparency print quality is poor
Page 197 · click to enlarge
Page 197

What is CMYK color?

Cyan, magenta, yellow, and black inks or toners can be printed in various amounts to produce a large range of colors observed in nature. For example, cyan and yellow can be combined to create green. Printing presses, inkjet printers, and color laser printers create colors in this manner. CMYK color is a method of describing colors by indicating the amount of cyan, magenta, yellow, and black needed to reproduce a particular color.

How is color specified in a document to be printed?

Software programs typically specify document color using RGB or CMYK color combinations. Additionally, they allow users to modify the color of each object in a document. For more information, see the software program Help topics.

How does the printer know what color to print?

When a user prints a document, information describing the type and color of each object is sent to the printer. The color information is passed through color conversion tables that translate the color into the appropriate amounts of cyan, magenta, yellow, and black toner needed to produce the desired color. The object information determines the application of color conversion tables. For example, it is possible to apply one type of color conversion table to text while applying a different color conversion table to photographic images.

Why doesn't the printed color match the color I see on the computer screen?

The color conversion tables used in Auto Color Correction mode generally approximate the colors of a standard computer monitor. However, because of technology differences that exist between printers and monitors, there are many colors that can also be affected by monitor variations and lighting conditions. For recommendations on how the printer color sample pages may be useful in solving certain color‑matching problems, see the question, “How can I match a particular color (such as a corporate logo)?”

The printed page appears tinted. Can I adjust the color?

Sometimes a printed page may appear tinted (for example, everything printed seems to be too red). This can be caused by environmental conditions, paper type, lighting conditions, or user preference. In these instances, adjust the Color Balance setting to create a more preferable color. Color Balance provides the user with the ability to make subtle adjustments to the amount of toner being used in each color plane. Selecting positive or negative values for cyan, magenta, yellow, and black (from the Color Balance menu) will slightly increase or decrease the amount of toner used for the chosen color. For example, if a printed page has a red tint, then decreasing both magenta and yellow could potentially improve the color balance.

My color transparencies seem dark when they are projected. Is there anything I can do to improve the color?

This problem most commonly occurs when projecting transparencies with reflective overhead projectors. To obtain the highest projected color quality, transmissive overhead projectors are recommended. If a reflective projector must be used, then adjusting the Toner Darkness setting to 1, 2, or 3 will lighten the transparency. Make sure to print on the recommended type of color transparencies.

What is manual color correction?

When manual color correction is enabled, the printer employs user‑selected color conversion tables to process objects. However, Color Correction must be set to Manual, or no user‑defined color conversion will be implemented. Manual color correction settings are specific to the type of object being printed (text, graphics, or images), and how the color of the object is specified in the software program (RGB or CMYK combinations).

  • Manual color correction is not useful if the software program does not specify colors with RGB or CMYK combinations. It is also not effective in situations in which the software program or the computer operating system controls the adjustment of colors.
  • The color conversion tables—applied to each object when Color Correction is set to Auto—generate preferred colors for the majority of documents.

Troubleshooting 197

Page 198 of the Lexmark C 790 user manual — Transparency print quality is poor
Page 198 · click to enlarge
Page 198

To manually apply a different color conversion table:

1 From the Quality menu, select Color Correction, and then select Manual.

2 From the Quality menu, select Manual Color, and then select the appropriate color conversion table for the affected object type.

Object type Color conversion tables

  • Vivid —Produces brighter, more saturated colors and may be applied to all incoming color formats.
  • sRGB Display —Produces an output that approximates the colors displayed on a computer monitor. Black toner usage is optimized for printing photographs.
  • Display—True Black —Produces an output that approximates the colors displayed on a computer monitor. Uses only black toner to create all levels of neutral gray.
  • sRGB Vivid —Provides an increased color saturation for the sRGB Display color correction. Black usage is optimized for printing business graphics.
  • Off —No color correction is implemented.
  • US CMYK —Applies color correction to approximate the SWOP (Specifications for Web Offset Publishing) color output.
  • Euro CMYK —Applies color correction to approximated EuroScale color output.
  • Vivid CMYK —Increases the color saturation of the US CMYK color correction setting.
  • Off —No color correction is implemented.

How can I match a particular color (such as a corporate logo)?

From the printer Quality menu, nine types of Color Samples sets are available. These are also available from the Color Samples page of the Embedded Web Server. Selecting any sample set generates a multiple‑page printout consisting of hundreds of colored boxes. Either a CMYK or RGB combination is located on each box, depending on the table selected. The observed color of each box is obtained by passing the CMYK or RGB combination labeled on the box through the selected color conversion table.

By examining Color Samples sets, a user can identify the box whose color is the closest to the desired color. The color combination labeled on the box can then be used for modifying the color of the object in a software program. For more information, see the software program Help topics. Manual color correction may be necessary to utilize the selected color conversion table for the particular object.

Selecting which Color Samples set to use for a particular color‑matching problem depends on the Color Correction setting being used (Auto, Off, or Manual), the type of object being printed (text, graphics, or images), and how the color of the object is specified in the software program (RGB or CMYK combinations). When the printer Color Correction setting is set to Off, the color is based on the print job information; and no color conversion is implemented.

Note: The Color Samples pages are not useful if the software program does not specify colors with RGB or CMYK combinations. Additionally, certain situations exist in which the software program or the computer operating system adjusts the RGB or CMYK combinations specified in the program through color management. The resulting printed color may not be an exact match of the Color Samples pages.

Show 7 more labels / short text on this page
Troubleshooting 198 · RGB Image · RGB Text · RGB Graphics · CMYK Image · CMYK Text · CMYK Graphics
Page 199 of the Lexmark C 790 user manual — Contacting customer support
Page 199 · click to enlarge
Page 199

What are detailed Color Samples and how do I access them?

Detailed Color Samples sets are available only through the Embedded Web Server of a network printer. A detailed Color Samples set contains a range of shades (displayed as colored boxes) that are similar to a user‑defined RGB or CMYK value. The likeness of the colors in the set are dependent on the value entered in the RGB or CMYK Increment box.

To access a detailed Color Samples set from the Embedded Web Server:

1 Type the printer IP address or host name in the address field of your Web browser.

  • View the information on the printer control panel home screen, or in the TCP/IP section under the Networks/Ports menu.
  • Print a network setup page or menu settings page and locate the information in the TCP/IP section.

2 Click Configuration > Color Samples > Detailed Options.

3 Select a color conversion table.

4 Enter the RGB or CMYK color number.

5 Enter an increment value from 1–255.

6 Click Print.

Embedded Web Server does not open

Try one or more of the following:

C HECK THE NETWORK CONNECTION

Make sure the printer and computer are turned on and connected to the same network.

C HECK THE ADDRESS ENTERED IN THE W EB BROWSER

  • Depending on the network settings, you may need to type “ https:// ” instead of “ http:// ” before the printer IP address to access the Embedded Web Server. For more information, contact your system support person.
  • Make sure printer IP address is correct.

T EMPORARILY DISABLE W EB PROXY SERVERS

Proxy servers may block or restrict you from accessing certain Web sites including the Embedded Web Server. For more information, contact your system support person.

Contacting customer support

When you contact customer support, you will need to be able to describe the problem you are experiencing, the message on the printer display, and the troubleshooting steps you have already taken to find a solution.

Troubleshooting 199

Page 200 of the Lexmark C 790 user manual — Embedded Web Server does not open
Page 200 · click to enlarge
Page 200

You need to know your printer model type and serial number. For more information, see the label at the back of the printer. The serial number is also listed on the menu settings page.

Lexmark has various ways to help you solve your printing problem. Visit the Lexmark Web site at http://support.lexmark.com, and then select one of the following:

Tech Library You can browse our library of manuals, support documentation, drivers, and other downloads to help you

solve common problems.

E-mail You can send an e-mail to the Lexmark team, describing your problem. A service representative will respond and provide you with information to solve your problem.

Live chat You can chat directly with a service representative. They can work with you to solve your printer problem or provide assistance through Assisted Service where the service representative can remotely connect to your computer through the Internet to troubleshoot problems, install updates, or complete other tasks to help you successfully use your Lexmark product.

Telephone support is also available. In the U.S. or Canada, call 1-800-539-6275. For other countries or regions, visit http://support.lexmark.com.

Troubleshooting 200

Page 201 of the Lexmark C 790 user manual — GOVERNMENT END USERS
Page 201 · click to enlarge
Page 201

Notices

Product information

Product name:

Lexmark C792e, C792de, C792dte, C792dhe, CS792

Machine type:

Model(s):

Edition notice

The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you.

This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in later editions. Improvements or changes in the products or the programs described may be made at any time.

References in this publication to products, programs, or services do not imply that the manufacturer intends to make these available in all countries in which it operates. Any reference to a product, program, or service is not intended to state or imply that only that product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any existing intellectual property right may be used instead. Evaluation and verification of operation in conjunction with other products, programs, or services, except those expressly designated by the manufacturer, are the user’s responsibility.

For Lexmark technical support, visit http://support.lexmark.com.

For information on supplies and downloads, visit www.lexmark.com.

© 2014 Lexmark International, Inc.

All rights reserved.

GOVERNMENT END USERS

The Software Program and any related documentation are "Commercial Items," as that term is defined in 48 C.F.R. 2.101, "Computer Software" and "Commercial Computer Software Documentation," as such terms are used in 48 C.F.R. 12.212 or 48 C.F.R. 227.7202, as applicable. Consistent with 48 C.F.R. 12.212 or 48 C.F.R. 227.7202-1 through 227.7207-4, as applicable, the Commercial Computer Software and Commercial Software Documentation are licensed to the U.S. Government end users (a) only as Commercial Items and (b) with only those rights as are granted to all other end users pursuant to the terms and conditions herein.

210, 230, 235 · October 2014

Page 202 of the Lexmark C 790 user manual — Trademarks
Page 202 · click to enlarge
Page 202

Trademarks

Lexmark, Lexmark with diamond design, MarkNet, and MarkVision are trademarks of Lexmark International, Inc., registered in the United States and/or other countries.

MarkTrack, PrintCryption, and StapleSmart are trademarks of Lexmark International, Inc.

PCL® is a registered trademark of the Hewlett-Packard Company. PCL is Hewlett-Packard Company’s designation of a set of printer commands (language) and functions included in its printer products. This printer is intended to be compatible with the PCL language. This means the printer recognizes PCL commands used in various application programs, and that the printer emulates the functions corresponding to the commands.

The following terms are trademarks or registered trademarks of these companies:

Lexmark C 790 — Trademarks diagram (page 202)
Fig. 103 · Trademarks

CG Times Based on Times New Roman under license from The Monotype Corporation plc, is a product of Agfa Corporation

Page 203 of the Lexmark C 790 user manual — Noise emission levels
Page 203 · click to enlarge
Page 203

All other trademarks are the property of their respective owners.

AirPrint and the AirPrint logo are trademarks of Apple, Inc.

Federal Communications Commission (FCC) compliance information statement

This product has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The FCC Class A limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense.

The manufacturer is not responsible for any radio or television interference caused by using other than recommended cables or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void the user's authority to operate this equipment.

Modular component notice

This product may contain the following modular component(s):

Lexmark regulatory type/model LEX-M01-003; FCC ID: IYLM01003; IC: 2376A-M01003

Licensing notices

All licensing notices associated with this product can be viewed from the root directory of the installation software CD.

Noise emission levels

The following measurements were made in accordance with ISO 7779 and reported in conformance with ISO 9296.

1-meter average sound pressure, dBA

Printing 53 (color); 52 (mono)

Values are subject to change. See www.lexmark.com for current values.

Ready 30

Page 204 of the Lexmark C 790 user manual — Static sensitivity notice
Page 204 · click to enlarge
Page 204

Waste from Electrical and Electronic Equipment (WEEE) directive

The WEEE logo signifies specific recycling programs and procedures for electronic products in countries of the European Union. We encourage the recycling of our products.

If you have further questions about recycling options, visit the Lexmark Web site at www.lexmark.com for your local sales office phone number.

India E-Waste notice

This product complies with the India E-Waste (Management and Handling) Rules, 2011, which prohibit use of lead, mercury, hexavalent chromium, polybrominated biphenyls, or polybrominated diphenyl ethers in concentrations exceeding 0.1% by weight and 0.01% by weight for cadmium, except for the exemption set in Schedule II of the Rules.

Battery notice

This product contains Perchlorate material. Special handling may apply. For more information, go to http://www.dtsc.ca.gov/hazardouswaste/perchlorate/.

Static sensitivity notice

This symbol identifies static-sensitive parts. Do not touch in the areas near these symbols without first touching the metal frame of the printer.

Page 205 of the Lexmark C 790 user manual — 危險 - 移除碳粉匣與安全連續開關失效時會 產 生看不見的雷射輻射。請避免曝露在雷射光束下。
Page 205 · click to enlarge
Page 205

ENERGY STAR

Any Lexmark product bearing the ENERGY STAR emblem on the product or on a start-up screen is certified to comply with Environmental Protection Agency (EPA) ENERGY STAR requirements as configured when shipped by Lexmark.

Temperature information

Ambient operating temperature 15.6 to 32.2°C (60 to 90°F)

Shipping and storage temperature -40 to 40°C (-40 to 104°F)

Laser notice

The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR Chapter I, Subchapter J for Class I (1) laser products, and elsewhere is certified as a Class I laser product conforming to the requirements of IEC 60825-1.

Class I laser products are not considered to be hazardous. The printer contains internally a Class IIIb (3b) laser that is nominally a 10 milliwatt gallium arsenide laser operating in the wavelength of 787-800 nanometers. The laser system and printer are designed so there is never any human access to laser radiation above a Class I level during normal operation, user maintenance, or prescribed service condition.

Laser advisory label

A laser notice label may be affixed to this printer as shown:

Opasnost - Nevidljivo lasersko zračenje kada su kasete uklonjene i poništena sigurnosna veza. Izbjegavati izlaganje zracima.

NEBEZPEČÍ - Když jsou vyjmuty kazety a je odblokována pojistka, ze zařízení je vysíláno neviditelné laserové záření. Nevystavujte se působení laserového paprsku. FARE - Usynlig laserstråling, når patroner fjernes, og spærreanordningen er slået fra. Undgå at blive udsat for laserstrålen.

VAARA - Näkymätöntä lasersäteilyä on varottava, kun värikasetit on poistettu ja lukitus on auki. Vältä lasersäteelle altistumista. GEFAHR - Unsichtbare Laserstrahlung beim Herausnehmen von Druckkassetten und offener Sicherheitssperre. Laserstrahl meiden.

ΚΙΝΔΥΝΟΣ - Έκλυση αόρατης ακτινοβολίας laser κατά την αφαίρεση των κασετών και την απασφάλιση της μανδάλωσης. Αποφεύγετε την έκθεση στην ακτινοβολία laser.

VESZÉLY – Nem látható lézersugárzás fordulhat elő a patronok eltávolításakor és a zárószerkezet felbontásakor. Kerülje a lézersugárnak való kitettséget.

ОПАСНО! Невидимое лазерное излучение при извлеченных картриджах и снятии блокировки. Избегайте воздействия лазерных лучей.

Pozor – Nebezpečenstvo neviditeľného laserového žiarenia pri odobratých kazetách a odblokovanej poistke. Nevystavujte sa lúčom.

危险 - 当移除碳粉盒及互锁失效时会产生看不见的激光辐射,请避免暴露在激光光束下。

危險 - 移除碳粉匣與安全連續開關失效時會 產 生看不見的雷射輻射。請避免曝露在雷射光束下。

危険 - カートリッジが取り外され、内部ロックが無効になると、見えないレーザー光が放射されます。 このレーザー光に当たらないようにしてください。

Page 206 of the Lexmark C 790 user manual — Hibernate Mode
Page 206 · click to enlarge
Page 206

Power consumption

Product power consumption

The following table documents the power consumption characteristics of the product.

Mode Description Power consumption (Watts)

Active The product is generating hard‑copy output from electronic inputs. 850 W

Idle The product is waiting for a print job. 50 W

Sleep Mode The product is in a high‑level energy‑saving mode. 10 W

Hibernate The product is in a low‑level energy‑saving mode. 0.55 W

Off The product is plugged into a wall outlet, but the power switch is turned off. 0 W

The power consumption levels listed in the previous table represent time-averaged measurements. Instantaneous power draws may be substantially higher than the average.

Values are subject to change. See www.lexmark.com for current values.

Sleep Mode

This product is designed with an energy-saving mode called Sleep Mode. The Sleep Mode saves energy by lowering power consumption during extended periods of inactivity. The Sleep Mode is automatically engaged after this product is not used for a specified period of time, called the Sleep Mode Timeout.

Factory default Sleep Mode Timeout for this product (in minutes): 20

By using the configuration menus, the Sleep Mode Timeout can be modified between 1 minute and 240 minutes. Setting the Sleep Mode Timeout to a low value reduces energy consumption, but may increase the response time of the product. Setting the Sleep Mode Timeout to a high value maintains a fast response, but uses more energy.

Hibernate Mode

This product is designed with an ultra‑low power operating mode called Hibernate mode. When operating in Hibernate Mode, all other systems and devices are powered down safely.

The Hibernate mode can be entered in any of the following methods:

  • Using the Hibernate Timeout
  • Using the Schedule Power modes
  • Using the Sleep/Hibernate button

Factory default Hibernate Timeout for this product in all countries or regions 3 days

The amount of time the printer waits after a job is printed before it enters Hibernate mode can be modified between one hour and one month.

Page 207 of the Lexmark C 790 user manual — European Community (EC) directives conformity
Page 207 · click to enlarge
Page 207

Off mode

If this product has an off mode which still consumes a small amount of power, then to completely stop product power consumption, disconnect the power supply cord from the electrical outlet.

Total energy usage

It is sometimes helpful to calculate the total product energy usage. Since power consumption claims are provided in power units of Watts, the power consumption should be multiplied by the time the product spends in each mode in order to calculate energy usage. The total product energy usage is the sum of each mode's energy usage.

Industry Canada compliance statement

This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Standard ICES-003.

Avis de conformité aux normes de l’industrie du Canada

Cet appareil numérique de classe A est conforme aux exigences de la norme canadienne relative aux équipements pouvant causer des interférences NMB-003.

Japanese VCCI notice

Lexmark C 790 — Japanese VCCI notice diagram (page 207)
Fig. 104 · Japanese VCCI notice

European Community (EC) directives conformity

This product is in conformity with the protection requirements of EC Council directives 2004/108/EC and 2006/95/EC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility and safety of electrical equipment designed for use within certain voltage limits.

The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY, A declaration of conformity to the requirements of the Directives is available upon request from the Authorized Representative.

This product satisfies the Class A limits of EN 55022 and safety requirements of EN 60950.

Page 208 of the Lexmark C 790 user manual — Industry Canada (Canada)
Page 208 · click to enlarge
Page 208

Radio interference notice

This is a product that complies with the emission requirements of EN55022 Class A limits and immunity requirements of EN55024. This product is not intended to be used in residential/domestic environments.

This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

Regulatory notices for wireless products

This section contains the following regulatory information pertaining to wireless products that contain transmitters, for example, but not limited to, wireless network cards or proximity card readers.

Exposure to radio frequency radiation

The radiated output power of this device is far below the radio frequency exposure limits of the FCC and other regulatory agencies. A minimum separation of 20 cm (8 inches) must be maintained between the antenna and any persons for this device to satisfy the RF exposure requirements of the FCC and other regulatory agencies.

Industry Canada (Canada)

This device complies with Industry Canada specification RSS-210. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

This device has been designed to operate only with the antenna provided. Use of any other antenna is strictly prohibited per regulations of Industry Canada.

To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.

The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF fields in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada's Web site www.hc-sc.gc.ca/rpb

The term "IC:" before the certification/registration number only signifies that the Industry Canada technical specifications were met.

Industry Canada (Canada)

Cet appareil est conforme à la norme RSS-210 d'Industry Canada. Son fonctionnement est soumis aux deux conditions suivantes :

(1) cet appareil ne doit pas provoquer d'interférences et (2) il doit accepter toute interférence reçue, y compris celles risquant d'altérer son fonctionnement.

Cet appareil a été conçu pour fonctionner uniquement avec l'antenne fournie. L'utilisation de toute autre antenne est strictement interdite par la réglementation d'Industry Canada.

Page 209 of the Lexmark C 790 user manual — Notice to users in the European Union
Page 209 · click to enlarge
Page 209

En application des réglementations d'Industry Canada, l'utilisation d'une antenne de gain supérieur est strictement interdite.

Pour empêcher toute interférence radio au service faisant l'objet d'une licence, cet appareil doit être utilisé à l'intérieur et loin des fenêtres afin de garantir une protection optimale.

Si le matériel (ou son antenne d'émission) est installé à l'extérieur, il doit faire l'objet d'une licence.

L'installateur de cet équipement radio doit veiller à ce que l'antenne soit implantée et dirigée de manière à n'émettre aucun champ HF dépassant les limites fixées pour l'ensemble de la population par Santé Canada. Reportez-vous au Code de sécurité 6 que vous pouvez consulter sur le site Web de Santé Canada www.hc-sc.gc.ca/rpb

Le terme « IC » précédant le numéro de d'accréditation/inscription signifie simplement que le produit est conforme aux spécifications techniques d'Industry Canada.

Notice to users in the European Union

Products bearing the CE mark are in conformity with the protection requirements of EC Council directives 2004/108/EC, 2006/95/EC, and 1999/5/EC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility, safety of electrical equipment designed for use within certain voltage limits, and on radio equipment and telecommunications terminal equipment.

Compliance is indicated by the CE marking.

The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY, A declaration of conformity to the requirements of the Directives is available upon request from the Authorized Representative.

This product satisfies the Class A limits of EN 55022 and safety requirements of EN 60950.

Products equipped with 2.4GHz Wireless LAN option are in conformity with the protection requirements of EC Council directives 2004/108/EC, 2006/95/EC, and 1999/5/EC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility, safety of electrical equipment designed for use within certain voltage limits and on radio equipment and telecommunications terminal equipment.

Compliance is indicated by the CE marking.

Operation is allowed in all EU and EFTA countries, but is restricted to indoor use only.

The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY, A declaration of conformity to the requirements of the Directives is available upon request from the Authorized Representative.

This product may be used in the countries indicated in the table below.

Page 210 of the Lexmark C 790 user manual — Notice to users in the European Union
Page 210 · click to enlarge
Page 210
Lexmark C 790 — Notice to users in the European Union diagram (page 210)
Fig. 105 · Notice to users in the European Union

AT BE BG CH CY CZ DE DK EE

EL ES FI FR HR HU IE IS IT

LI LT LU LV MT NL NO PL PT

Česky Společnost Lexmark International, Inc. tímto prohlašuje, že výrobek tento výrobek je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES.

Dansk Lexmark International, Inc. erklærer herved, at dette produkt overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.

Deutsch Hiermit erklärt Lexmark International, Inc., dass sich das Gerät dieses Gerät in Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.

Ελληνική ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Η LEXMARK INTERNATIONAL, INC. ΔΗΛΩΝΕΙ ΟΤΙ ΑΥΤΟ ΤΟ ΠΡΟΪΟΝ ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.

English Hereby, Lexmark International, Inc., declares that this type of equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

Español Por medio de la presente, Lexmark International, Inc. declara que este producto cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.

Eesti Käesolevaga kinnitab Lexmark International, Inc., et seade see toode vastab direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele muudele asjakohastele sätetele.

Suomi Lexmark International, Inc. vakuuttaa täten, että tämä tuote on direktiivin 1999/5/EY oleellisten vaatimusten ja muiden sitä koskevien direktiivin ehtojen mukainen.

Français Par la présente, Lexmark International, Inc. déclare que l'appareil ce produit est conforme aux exigences fondamentales et autres dispositions pertinentes de la directive 1999/5/CE.

Magyar Alulírott, Lexmark International, Inc. nyilatkozom, hogy a termék megfelel a vonatkozó alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.

Íslenska Hér með lýsir Lexmark International, Inc. yfir því að þessi vara er í samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 1999/5/EC.

Italiano Con la presente Lexmark International, Inc. dichiara che questo questo prodotto è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.

Latviski Ar šo Lexmark International, Inc. deklarē, ka šis izstrādājums atbilst Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem noteikumiem.

Lietuvių Šiuo Lexmark International, Inc. deklaruoja, kad šis produktas atitinka esminius reikalavimus ir kitas 1999/5/EB direktyvos nuostatas.

Malti Bil-preżenti, Lexmark International, Inc., jiddikjara li dan il-prodott huwa konformi mal-ħtiġijiet essenzjali u ma dispożizzjonijiet oħrajn relevanti li jinsabu fid-Direttiva 1999/5/KE.

Nederlands Hierbij verklaart Lexmark International, Inc. dat het toestel dit product in overeenstemming is met de essentiële

eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.

Norsk Lexmark International, Inc. erklærer herved at dette produktet er i samsvar med de grunnleggende krav og øvrige relevante krav i direktiv 1999/5/EF.

Page 211 of the Lexmark C 790 user manual — Limited warranty service
Page 211 · click to enlarge
Page 211

Polski Niniejszym Lexmark International, Inc. oświadcza, że niniejszy produkt jest zgodny z zasadniczymi wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/EC.

Português A Lexmark International Inc. declara que este este produto está conforme com os requisitos essenciais e outras disposições da Diretiva 1999/5/CE.

Slovensky Lexmark International, Inc. týmto vyhlasuje, že tento produkt spĺňa základné požiadavky a všetky

príslušné ustanovenia smernice 1999/5/ES.

Slovensko Lexmark International, Inc. izjavlja, da je ta izdelek v skladu z bistvenimi zahtevami in ostalimi

relevantnimi določili direktive 1999/5/ES.

Svenska Härmed intygar Lexmark International, Inc. att denna produkt står i överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.

STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUNCTION LASER PRINTERS

Lexmark International, Inc., Lexington, KY

This limited warranty applies to the United States and Canada. For customers outside the U.S., refer to the country- specific warranty information that came with your product.

This limited warranty applies to this product only if it was originally purchased for your use, and not for resale, from Lexmark or a Lexmark Remarketer, referred to in this statement as “Remarketer.”

Limited warranty

Lexmark warrants that this product:

—Is manufactured from new parts, or new and serviceable used parts, which perform like new parts

—Is, during normal use, free from defects in material and workmanship

If this product does not function as warranted during the warranty period, contact a Remarketer or Lexmark for repair or replacement (at Lexmark's option).

If this product is a feature or option, this statement applies only when that feature or option is used with the product for which it was intended. To obtain warranty service, you may be required to present the feature or option with the product.

If you transfer this product to another user, warranty service under the terms of this statement is available to that user for the remainder of the warranty period. You should transfer proof of original purchase and this statement to that user.

Limited warranty service

The warranty period starts on the date of original purchase as shown on the purchase receipt and ends 12 months later provided that the warranty period for any supplies and for any maintenance items included with the printer shall end earlier if it, or its original contents, are substantially used up, depleted, or consumed. Fuser Units, Transfer/Transport Units, Paper Feed items, if any, and any other items for which a Maintenance Kit is available are substantially consumed when the printer displays a “Life Warning” or “Scheduled Maintenance” message for such item.

Page 212 of the Lexmark C 790 user manual — Extent of limited warranty
Page 212 · click to enlarge
Page 212

To obtain warranty service you may be required to present proof of original purchase. You may be required to deliver your product to the Remarketer or Lexmark, or ship it prepaid and suitably packaged to a Lexmark designated location. You are responsible for loss of, or damage to, a product in transit to the Remarketer or the Lexmark designated location.

When warranty service involves the exchange of a product or part, the item replaced becomes the property of the Remarketer or Lexmark. The replacement may be a new or repaired item.

The replacement item assumes the remaining warranty period of the original product.

Replacement is not available to you if the product you present for exchange is defaced, altered, in need of a repair not included in warranty service, damaged beyond repair, or if the product is not free of all legal obligations, restrictions, liens, and encumbrances.

As part of your warranty service and/or replacement, Lexmark may update the firmware in your printer to the latest version. Firmware updates may modify printer settings and cause counterfeit and/or unauthorized products, supplies, parts, materials (such as toners and inks), software, or interfaces to stop working. Authorized use of genuine Lexmark products will not be impacted.

Before you present this product for warranty service, remove all print cartridges, programs, data, and removable storage media (unless directed otherwise by Lexmark).

For further explanation of your warranty alternatives and the nearest Lexmark authorized servicer in your area contact Lexmark on the World Wide Web.

Remote technical support is provided for this product throughout its warranty period. For products no longer covered by a Lexmark warranty, technical support may not be available or only be available for a fee.

Extent of limited warranty

Lexmark does not warrant uninterrupted or error-free operation of any product or the durability or longevity of prints produced by any product.

Warranty service does not include repair of failures caused by:

—Modification or unauthorized attachments

—Accidents, misuse, abuse or use inconsistent with Lexmark user’s guides, manuals, instructions or guidance

—Unsuitable physical or operating environment

—Maintenance by anyone other than Lexmark or a Lexmark authorized servicer

—Operation of a product beyond the limit of its duty cycle

—Use of printing media outside of Lexmark specifications

—Refurbishment, repair, refilling or remanufacture by a third party of products, supplies or parts

—Products, supplies, parts, materials (such as toners and inks), software, or interfaces not furnished by Lexmark

TO THE EXTENT PERMITTED BY APPLICABLE LAW, NEITHER LEXMARK NOR ITS THIRD PARTY SUPPLIERS OR REMARKETERS MAKE ANY OTHER WARRANTY OR CONDITION OF ANY KIND, WHETHER EXPRESS OR IMPLIED, WITH RESPECT TO THIS PRODUCT, AND SPECIFICALLY DISCLAIM THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND SATISFACTORY QUALITY. ANY WARRANTIES THAT MAY NOT BE DISCLAIMED UNDER APPLICABLE LAW ARE LIMITED IN DURATION TO THE WARRANTY PERIOD. NO WARRANTIES, EXPRESS OR IMPLIED, WILL APPLY AFTER THIS PERIOD. ALL INFORMATION, SPECIFICATIONS, PRICES, AND SERVICES ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE.

Page 213 of the Lexmark C 790 user manual — Patent acknowledgment
Page 213 · click to enlarge
Page 213

Limitation of liability

Your sole remedy under this limited warranty is set forth in this document. For any claim concerning performance or nonperformance of Lexmark or a Remarketer for this product under this limited warranty, you may recover actual damages up to the limit set forth in the following paragraph.

Lexmark's liability for actual damages from any cause whatsoever will be limited to the amount you paid for the product that caused the damages. This limitation of liability will not apply to claims by you for bodily injury or damage to real property or tangible personal property for which Lexmark is legally liable. IN NO EVENT WILL LEXMARK BE LIABLE FOR ANY LOST PROFITS, LOST SAVINGS, INCIDENTAL DAMAGE, OR OTHER ECONOMIC OR CONSEQUENTIAL DAMAGES. This is true even if you advise Lexmark or a Remarketer of the possibility of such damages. Lexmark is not liable for any claim by you based on a third party claim.

This limitation of remedies also applies to claims against any Suppliers and Remarketers of Lexmark. Lexmark's and its Suppliers' and Remarketers' limitations of remedies are not cumulative. Such Suppliers and Remarketers are intended beneficiaries of this limitation.

Additional rights

Some states do not allow limitations on how long an implied warranty lasts, or do not allow the exclusion or limitation of incidental or consequential damages, so the limitations or exclusions contained above may not apply to you.

This limited warranty gives you specific legal rights. You may also have other rights that vary from state to state.

Patent acknowledgment

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for Elliptic Curve Cryptography (ECC) Cipher Suites for Transport Layer Security (TLS) implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for TLS Elliptic Curve Cipher Suites with SHA-256/382 and AES Galois Counter Mode (GCM) implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for TLS Suite B Profile for Transport Layer Security (TLS) implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for Addition of the Camellia Cipher Suites to Transport Layer Security (TLS) implemented in the product or service.

The use of certain patents in this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for AES-CCM ECC Cipher Suites for TLS implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for IKE and IKEv2 Authentication Using the Eliptic Curve Digital Signature Algorithm (ECDSA) implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for Suite B Cryptographic Suites for IPSec implemented in the product or service.

Page 214 of the Lexmark C 790 user manual — Patent acknowledgment
Page 214 · click to enlarge
Page 214

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for Algorithms for Internet Key Exchange version 1 (IKEv1) implemented in the product or service.

Page 216 of the Lexmark C 790 user manual — Table of contents
Page 216 · click to enlarge
Page 216

Table of contents

Contentsp.2Safety informationp.6Learning about the printerp.8Finding information about the printerp.8Selecting a location for the printerp.9Printer configurationsp.10Understanding the printer control panelp.11Understanding the home screenp.13Understanding the home screenp.13Using the touch-screen buttonsp.14Setting up and using the home screen applicationsp.17Finding the IP address of the printerp.17Finding the IP address of the computerp.17Accessing the Embedded Web Serverp.17Activating the home screen applicationsp.18Exporting and importing a configurationp.20Additional printer setupp.21Installing internal optionsp.21Available internal optionsp.21Using the security lock featurep.22Accessing the system boardp.22Installing a memory cardp.26Installing a flash memory or firmware cardp.28Installing an Internal Solutions Portp.29Installing a printer hard diskp.33Removing a printer hard diskp.37Order of installationp.39Installing optional traysp.39Supported finishing featuresp.40Attaching cablesp.42Verifying printer setupp.43Printing a menu settings pagep.43Printing a network setup pagep.44Setting up the printer softwarep.44Installing the printerp.44Adding available options in the print driverp.44Setting up wireless printingp.45Preparing to set up the printer on a wireless networkp.45Installing the printer on a wireless network (Windows)p.46Installing the printer on a wireless network (Macintosh)p.47Changing port settings after installing a new network ISPp.50Setting up serial printing (Windows only)p.51Minimizing your printer's environmental impactp.52Saving paper and tonerp.52Using recycled paperp.52Conserving suppliesp.52Saving energyp.53Using Hibernate modep.53Using Eco-Modep.53Reducing printer noisep.54Adjusting Sleep modep.54Adjusting the brightness of the printer displayp.54Recyclingp.55Recycling Lexmark productsp.55Recycling Lexmark packagingp.55Returning Lexmark cartridges for reuse or recyclingp.55Loading paper and specialty mediap.57Setting the paper size and typep.57Configuring Universal paper settingsp.57Loading the standard or optional 550-sheet trayp.57Loading the 2000-sheet high-capacity feederp.60Loading the multipurpose feederp.63Linking and unlinking traysp.65Linking and unlinking traysp.65Linking exit binsp.66Creating a custom name for a paper typep.66Assigning a custom paper typep.66Paper and specialty media guidep.68Paper guidelinesp.68Paper characteristicsp.68Unacceptable paperp.69Selecting paperp.69Selecting preprinted forms and letterheadp.69Using recycled paper and other office papersp.70Storing paperp.70Supported paper sizes, types, and weightsp.71Supported paper sizesp.71Supported paper types and weightsp.72Printingp.74Printing a documentp.74Printing a documentp.74Printing in black and whitep.74Adjusting toner darknessp.74Printing from a flash drive or mobile devicep.75Printing from a flash drivep.75Supported flash drives and file typesp.76Printing from a mobile devicep.76Printing specialty documentsp.76Tips on using letterheadp.76Tips on using transparenciesp.77Tips on using envelopesp.77Tips on using labelsp.78Tips on using card stockp.78Printing confidential and other held jobsp.79Storing print jobs in the printerp.79Printing confidential and other held jobsp.79Printing information pagesp.80Printing a font sample listp.80Printing a directory listp.80Canceling a print jobp.81Canceling a print job from the printer control panelp.81Canceling a print job from the computerp.81Understanding the printer menusp.82Menus listp.82Supplies menup.83Paper menup.84Default Source menup.84Paper Size/Type menup.85Configure MP menup.88Substitute Size menup.88Paper Texture menup.88Paper Weight menup.90Paper Loading menup.92Custom Types menup.93Custom Names menup.94Custom Bin Names menup.94Universal Setup menup.94Bin Setup menup.95Reports menup.96Reports menup.96Network/Ports menup.97Active NIC menup.97Standard Network or Network [x] menusp.97Network Reports menup.99Network Card menup.99TCP/IP menup.99IPv6 menup.100Wireless menup.101AppleTalk menup.102Standard USB menup.102Parallel [x] menup.104Serial [x] menup.106SMTP Setup menup.108Security menup.110Miscellaneous Security Settings menup.110Confidential Print menup.110Erase Temporary Data Files menup.111Security Audit Log menup.112Set Date and Time menup.112Settings menup.113General Settings menup.113Flash Drive menup.119Setup menup.121Job Accounting menup.121Finishing menup.123Quality menup.125Utilities menup.128XPS menup.128PDF menup.128PostScript menup.129PCL Emul menup.129HTML menup.132Image menup.133Help menup.133Securing the memory before moving the printerp.135Statement of Volatilityp.135Erasing volatile memoryp.135Erasing non-volatile memoryp.135Erasing printer hard disk memoryp.136Configuring printer hard disk encryptionp.136Maintaining the printerp.138Cleaning the exterior of the printerp.138Cleaning the printhead lensesp.138Storing suppliesp.139Checking the status of suppliesp.140Checking the status of supplies from the printer control panelp.140Checking the status of supplies from a network computerp.140Ordering suppliesp.140Ordering a print cartridgep.140Ordering a fuser or a transfer modulep.141Ordering a waste toner bottlep.141Ordering staple cartridgesp.141Ordering a cleaning kitp.142Replacing suppliesp.142Replacing a print cartridgep.142Replacing the waste toner bottlep.145Moving the printerp.146Before moving the printerp.146Moving the printer to another locationp.147Shipping the printerp.147Administrative supportp.148Finding advanced networking and administrator informationp.148Using the Embedded Web Serverp.148Checking the virtual displayp.148Checking the status of the printerp.148Setting up e-mail alertsp.149Viewing reportsp.149Restoring factory default settingsp.149Clearing jamsp.151Avoiding jamsp.151Understanding jam numbers and locationsp.151200 paper jamp.153201 paper jamp.153202–203 paper jamsp.154230 paper jamp.155231–239 paper jamsp.15624x paper jamp.156250 paper jamp.157400–403 and 460–461 paper jamsp.158431–454, and 456–458 paper jamsp.159455 staple jamp.159Troubleshootingp.162Checking an unresponsive printerp.162Understanding the printer messagesp.162Adjusting colorp.162An error has occurred with the USB drive. Please remove and reinsert drive.p.162Change [paper source] to [custom type name]p.162Change [paper source] to [custom type name] load [orientation]p.162Change [paper source] to [custom string]p.163Change [paper source] to [custom string] load [orientation]p.163Change [paper source] to [paper size] [paper type]p.163Change [paper source] to [paper size] [paper type] load [orientation]p.163Close paper transport coverp.163Close left side doorp.163Close [tray] doorp.164Close finisher side doorp.164Close finisher top coverp.164Close front doorp.164Disk corruptedp.164Disk near full. Securely clearing disk space.p.164Disk problemp.164Empty the hole punch boxp.164Error reading USB drive. Remove USB.p.165Insert staple cartridgep.165Insert Tray [x]p.165Insert the hole punch boxp.165Install bin [x]p.165Install envelope feederp.165Install Tray [x]p.166Load [src] with [custom type name]p.166Load [src] with [custom string]p.166Load [src] with [size]p.166Load [src] with [type] [size]p.167Load Manual Feeder with [custom type name]p.167Load Manual Feeder with [custom string]p.167Load Manual Feeder with [paper type] [paper size]p.167Load staplesp.167Paper changes neededp.168Reattach bin [x]p.168Reattach bin [x] – [y]p.168Remove paper from standard output binp.169Remove paper from bin [x]p.169Remove paper from all binsp.169Remove paper from [linked set bin name]p.169Remove packaging material, [area name]p.169Restore held jobs?p.169Slide finisher to the leftp.169Some held jobs were not restoredp.169Supply needed to complete jobp.169Unsupported diskp.16931.xx Missing or defective [color] cartridgep.17032.xx [color] cartridge part number unsupported by devicep.17034 Incorrect paper size, open [src]p.17035 Insufficient memory to support Resource Save featurep.17036 Printer service requiredp.17037 Insufficient memory to collate jobp.17137 Insufficient memory for Flash Memory Defragment operationp.17137 Insufficient memory, some Held Jobs were deletedp.17137 Insufficient memory, some held jobs will not be restoredp.17138 Memory fullp.17139 Complex page, some data may not have printedp.17140 [color] invalid refill, change cartridgep.17151 Defective flash detectedp.17252 Not enough free space in flash memory for resourcesp.17253 Unformatted flash detectedp.17254 Serial option [x] errorp.17254 Standard network software errorp.17254 Network [x] software errorp.17255 Unsupported option in slot [x]p.17356 Parallel port [x] disabledp.17356 Serial port [x] disabledp.17356 Standard USB port disabledp.17356 Standard parallel port disabledp.17356 USB port [x] disabledp.17357 Configuration change, some held jobs were not restoredp.17458 Input config errorp.17458 Too many bins attachedp.17458 Too many disks installedp.17458 Too many flash options installedp.17458 Too many trays attachedp.17559 Incompatible output bin [x]p.17561 Remove defective diskp.17562 Disk fullp.17580.xx Fuser near life warningp.17580.xx Fuser life warningp.17580.xx Replace fuserp.17680.xx Fuser missingp.17682.xx Waste toner bottle nearly fullp.17682.xx Replace waste toner bottlep.17682.xx Waste toner bottle missingp.17683.xx Transfer module life warningp.17683.xx Transfer module missingp.17683.xx Replace transfer modulep.17688.xx [color] cartridge nearly lowp.17688.xx [color] cartridge lowp.17788.xx [Color] cartridge very lowp.17788.xx [Color] cartridge critically lowp.1771565 Emulation error, load emulation optionp.177Solving printing problemsp.177Multiple-language PDF files do not printp.177Printer control panel display is blank or displays only diamondsp.178Error message about reading USB drive appearsp.178Print jobs do not printp.178Make sure there is no problem with your printerp.178Make sure the printer is ready to printp.178Check if a supply is missing or needs replacementp.178Check if the standard exit bin is fullp.178Check if the paper tray is emptyp.178Make sure the correct printer software is installedp.178Make sure the internal print server is working properlyp.178Make sure you are using a recommended USB, serial, or Ethernet cablep.179Make sure printer cables are securely connectedp.179Confidential and other held jobs do not printp.179Partial job, no job, or blank page printsp.179Make sure the printer has sufficient memoryp.179Print job takes longer than expectedp.179Reduce the complexity of the print jobp.179Turn off the Page Protect settingp.179Change the environmental settingsp.179Job prints from the wrong tray or on the wrong paperp.180Check the paper type and paper size settingsp.180Incorrect characters printp.180Tray linking does not workp.180Load the same size and type of paperp.180Use the same Paper Size and Paper Type settingsp.180Large jobs do not collatep.180Make sure Collate is set to Onp.180Reduce the complexity of the print jobp.180Make sure the printer has enough memoryp.181Unexpected page breaksp.181Increase the Print Timeout valuep.181Solving home screen application problemsp.181An application error has occurredp.181Check the system log for relevant detailsp.181Contact customer supportp.181Solving option problemsp.181Option does not operate correctly or quits after it is installedp.181Reset the printerp.181Check to see if the option is connected to the printerp.182Make sure the option is installedp.182Make sure the option is available in the printer driverp.182Make sure the option is selectedp.182Paper tray problemsp.182Make sure the paper is loaded correctlyp.182Reset the printerp.182Make sure the paper tray is installed correctlyp.1822,000-sheet drawer problemsp.182Check the drawer connectionp.182Load paperp.183Clear any jamsp.183Avoid paper jamsp.183Cannot detect flash memory cardp.183Cannot detect printer hard diskp.183Internal Solutions Port does not operate correctlyp.183Check the Internal Solutions Port (ISP) connectionsp.183Check the cablep.183Make sure the network software is configured correctlyp.183Internal print server does not operate correctlyp.184Check the print server connectionsp.184Make sure the network software is configured correctlyp.184Memory cardp.184USB/parallel interface card does not operate correctlyp.184Check the USB/parallel interface card connectionp.184Check the cablep.184Solving paper feed problemsp.184Paper frequently jamsp.184Check the paperp.184Make sure there is not too much paper in the paper trayp.184Check the paper guidesp.185The paper may have absorbed moisture due to high humidityp.185Paper jam message remains after jam is clearedp.185Check the paper pathp.185Jammed pages are not reprintedp.185Turn on Jam Recoveryp.185Solving print quality problemsp.185Printer is printing blank pagesp.185Make sure there is no packing material left on the toner or print cartridgep.185Make sure the toner or print cartridge is not low on tonerp.186Characters have jagged or uneven edgesp.186Clipped imagesp.186Check the guidesp.186Check the paper size settingp.186Fine horizontal lines appear on color pagesp.187Shadow images appear on printsp.187Check the paper type and weight settingsp.187Make sure the print cartridge is not low on tonerp.187Gray background on printsp.188Make sure there is no worn or defective print cartridgep.188Incorrect marginsp.188Check the paper guidesp.188Check the paper size settingp.188Light colored line, white line, or incorrectly colored line appears on printsp.189Make sure there is no defective print cartridgep.189Make sure the transfer belt is not defectivep.189Paper curlp.189Check the paper type and weight settingsp.189Load paper from a fresh packagep.189Print irregularitiesp.189Load paper from a fresh packagep.190Check the paper type and weight settingsp.190Avoid textured paper with rough finishesp.190Make sure there is no defective print cartridgep.190Make sure the transfer belt is not defectivep.190Make sure the fuser is not defectivep.190Print is too darkp.190Load paper from a fresh packagep.190Avoid textured paper with rough finishesp.190Check the Paper Type settingp.191Make sure there is no defective print cartridgep.191Print is too lightp.191Load paper from a fresh packagep.191Avoid textured paper with rough finishesp.191Check the Paper Type settingp.191Make sure the print cartridge is not low on tonerp.191Make sure there is no defective print cartridgep.192Repeating defects appear on printsp.192Replace the print cartridgep.192Replace the fuserp.192Skewed printp.192Check the paper guidesp.192Check the paperp.193Solid color or black pages appear on printsp.193Make sure the print cartridges are installed correctly, are not defective and not low on tonerp.193Black or white streaks appear on transparencies or paperp.193Ensure that the fill pattern is correctp.193Check the paper typep.193Make sure the print cartridge is not low on tonerp.194Streaked horizontal lines appear on printsp.194Select another tray or feederp.194Make sure there is no worn, defective, or empty print cartridgep.194Toner fog or background shading appears on a pagep.194Make sure print cartridges are installed correctly and are not defectivep.194Make sure the transfer belt is not worn or defectivep.194Make sure the fuser is not worn or defectivep.195Make sure there is no toner in the paper pathp.195Recalibrate the printerp.195Check the software program or applicationp.195Toner rubs offp.195Check the paper type and weight settingsp.195Check the paper texture settingp.195Make sure the fuser is not worn or defectivep.195Transparency print quality is poorp.196Check the transparenciesp.196Check the paper type settingp.196Uneven print densityp.196Make sure there is no defective or worn print cartridgep.196Solving color quality problemsp.196FAQ about color printingp.196Embedded Web Server does not openp.199Check the network connectionp.199Check the address entered in the Web browserp.199Temporarily disable Web proxy serversp.199Contacting customer supportp.199Noticesp.201Product informationp.201Edition noticep.201GOVERNMENT END USERSp.201Trademarksp.202Federal Communications Commission (FCC) compliance information statementp.203Modular component noticep.203Licensing noticesp.203Noise emission levelsp.203Waste from Electrical and Electronic Equipment (WEEE) directivep.204India E-Waste noticep.204Battery noticep.204Static sensitivity noticep.204ENERGY STARp.205Temperature informationp.205Laser noticep.205Laser advisory labelp.205Power consumptionp.206Product power consumptionp.206Sleep Modep.206Hibernate Modep.206Off modep.207Total energy usagep.207Japanese VCCI noticep.207European Community (EC) directives conformityp.207Radio interference noticep.208Regulatory notices for wireless productsp.208Exposure to radio frequency radiationp.208Industry Canada (Canada)p.208Notice to users in the European Unionp.209STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.211Patent acknowledgmentp.213Indexp.215
Page 217 of the Lexmark C 790 user manual — Table of contents
Page 217 · click to enlarge
Page 217

Table of contents

Contentsp.2Safety informationp.6Learning about the printerp.8Finding information about the printerp.8Selecting a location for the printerp.9Printer configurationsp.10Understanding the printer control panelp.11Understanding the home screenp.13Understanding the home screenp.13Using the touch-screen buttonsp.14Setting up and using the home screen applicationsp.17Finding the IP address of the printerp.17Finding the IP address of the computerp.17Accessing the Embedded Web Serverp.17Activating the home screen applicationsp.18Exporting and importing a configurationp.20Additional printer setupp.21Installing internal optionsp.21Available internal optionsp.21Using the security lock featurep.22Accessing the system boardp.22Installing a memory cardp.26Installing a flash memory or firmware cardp.28Installing an Internal Solutions Portp.29Installing a printer hard diskp.33Removing a printer hard diskp.37Order of installationp.39Installing optional traysp.39Supported finishing featuresp.40Attaching cablesp.42Verifying printer setupp.43Printing a menu settings pagep.43Printing a network setup pagep.44Setting up the printer softwarep.44Installing the printerp.44Adding available options in the print driverp.44Setting up wireless printingp.45Preparing to set up the printer on a wireless networkp.45Installing the printer on a wireless network (Windows)p.46Installing the printer on a wireless network (Macintosh)p.47Changing port settings after installing a new network ISPp.50Setting up serial printing (Windows only)p.51Minimizing your printer's environmental impactp.52Saving paper and tonerp.52Using recycled paperp.52Conserving suppliesp.52Saving energyp.53Using Hibernate modep.53Using Eco-Modep.53Reducing printer noisep.54Adjusting Sleep modep.54Adjusting the brightness of the printer displayp.54Recyclingp.55Recycling Lexmark productsp.55Recycling Lexmark packagingp.55Returning Lexmark cartridges for reuse or recyclingp.55Loading paper and specialty mediap.57Setting the paper size and typep.57Configuring Universal paper settingsp.57Loading the standard or optional 550-sheet trayp.57Loading the 2000-sheet high-capacity feederp.60Loading the multipurpose feederp.63Linking and unlinking traysp.65Linking and unlinking traysp.65Linking exit binsp.66Creating a custom name for a paper typep.66Assigning a custom paper typep.66Paper and specialty media guidep.68Paper guidelinesp.68Paper characteristicsp.68Unacceptable paperp.69Selecting paperp.69Selecting preprinted forms and letterheadp.69Using recycled paper and other office papersp.70Storing paperp.70Supported paper sizes, types, and weightsp.71Supported paper sizesp.71Supported paper types and weightsp.72Printingp.74Printing a documentp.74Printing a documentp.74Printing in black and whitep.74Adjusting toner darknessp.74Printing from a flash drive or mobile devicep.75Printing from a flash drivep.75Supported flash drives and file typesp.76Printing from a mobile devicep.76Printing specialty documentsp.76Tips on using letterheadp.76Tips on using transparenciesp.77Tips on using envelopesp.77Tips on using labelsp.78Tips on using card stockp.78Printing confidential and other held jobsp.79Storing print jobs in the printerp.79Printing confidential and other held jobsp.79Printing information pagesp.80Printing a font sample listp.80Printing a directory listp.80Canceling a print jobp.81Canceling a print job from the printer control panelp.81Canceling a print job from the computerp.81Understanding the printer menusp.82Menus listp.82Supplies menup.83Paper menup.84Default Source menup.84Paper Size/Type menup.85Configure MP menup.88Substitute Size menup.88Paper Texture menup.88Paper Weight menup.90Paper Loading menup.92Custom Types menup.93Custom Names menup.94Custom Bin Names menup.94Universal Setup menup.94Bin Setup menup.95Reports menup.96Reports menup.96Network/Ports menup.97Active NIC menup.97Standard Network or Network [x] menusp.97Network Reports menup.99Network Card menup.99TCP/IP menup.99IPv6 menup.100Wireless menup.101AppleTalk menup.102Standard USB menup.102Parallel [x] menup.104Serial [x] menup.106SMTP Setup menup.108Security menup.110Miscellaneous Security Settings menup.110Confidential Print menup.110Erase Temporary Data Files menup.111Security Audit Log menup.112Set Date and Time menup.112Settings menup.113General Settings menup.113Flash Drive menup.119Setup menup.121Job Accounting menup.121Finishing menup.123Quality menup.125Utilities menup.128XPS menup.128PDF menup.128PostScript menup.129PCL Emul menup.129HTML menup.132Image menup.133Help menup.133Securing the memory before moving the printerp.135Statement of Volatilityp.135Erasing volatile memoryp.135Erasing non-volatile memoryp.135Erasing printer hard disk memoryp.136Configuring printer hard disk encryptionp.136Maintaining the printerp.138Cleaning the exterior of the printerp.138Cleaning the printhead lensesp.138Storing suppliesp.139Checking the status of suppliesp.140Checking the status of supplies from the printer control panelp.140Checking the status of supplies from a network computerp.140Ordering suppliesp.140Ordering a print cartridgep.140Ordering a fuser or a transfer modulep.141Ordering a waste toner bottlep.141Ordering staple cartridgesp.141Ordering a cleaning kitp.142Replacing suppliesp.142Replacing a print cartridgep.142Replacing the waste toner bottlep.145Moving the printerp.146Before moving the printerp.146Moving the printer to another locationp.147Shipping the printerp.147Administrative supportp.148Finding advanced networking and administrator informationp.148Using the Embedded Web Serverp.148Checking the virtual displayp.148Checking the status of the printerp.148Setting up e-mail alertsp.149Viewing reportsp.149Restoring factory default settingsp.149Clearing jamsp.151Avoiding jamsp.151Understanding jam numbers and locationsp.151200 paper jamp.153201 paper jamp.153202–203 paper jamsp.154230 paper jamp.155231–239 paper jamsp.15624x paper jamp.156250 paper jamp.157400–403 and 460–461 paper jamsp.158431–454, and 456–458 paper jamsp.159455 staple jamp.159Troubleshootingp.162Checking an unresponsive printerp.162Understanding the printer messagesp.162Adjusting colorp.162An error has occurred with the USB drive. Please remove and reinsert drive.p.162Change [paper source] to [custom type name]p.162Change [paper source] to [custom type name] load [orientation]p.162Change [paper source] to [custom string]p.163Change [paper source] to [custom string] load [orientation]p.163Change [paper source] to [paper size] [paper type]p.163Change [paper source] to [paper size] [paper type] load [orientation]p.163Close paper transport coverp.163Close left side doorp.163Close [tray] doorp.164Close finisher side doorp.164Close finisher top coverp.164Close front doorp.164Disk corruptedp.164Disk near full. Securely clearing disk space.p.164Disk problemp.164Empty the hole punch boxp.164Error reading USB drive. Remove USB.p.165Insert staple cartridgep.165Insert Tray [x]p.165Insert the hole punch boxp.165Install bin [x]p.165Install envelope feederp.165Install Tray [x]p.166Load [src] with [custom type name]p.166Load [src] with [custom string]p.166Load [src] with [size]p.166Load [src] with [type] [size]p.167Load Manual Feeder with [custom type name]p.167Load Manual Feeder with [custom string]p.167Load Manual Feeder with [paper type] [paper size]p.167Load staplesp.167Paper changes neededp.168Reattach bin [x]p.168Reattach bin [x] – [y]p.168Remove paper from standard output binp.169Remove paper from bin [x]p.169Remove paper from all binsp.169Remove paper from [linked set bin name]p.169Remove packaging material, [area name]p.169Restore held jobs?p.169Slide finisher to the leftp.169Some held jobs were not restoredp.169Supply needed to complete jobp.169Unsupported diskp.16931.xx Missing or defective [color] cartridgep.17032.xx [color] cartridge part number unsupported by devicep.17034 Incorrect paper size, open [src]p.17035 Insufficient memory to support Resource Save featurep.17036 Printer service requiredp.17037 Insufficient memory to collate jobp.17137 Insufficient memory for Flash Memory Defragment operationp.17137 Insufficient memory, some Held Jobs were deletedp.17137 Insufficient memory, some held jobs will not be restoredp.17138 Memory fullp.17139 Complex page, some data may not have printedp.17140 [color] invalid refill, change cartridgep.17151 Defective flash detectedp.17252 Not enough free space in flash memory for resourcesp.17253 Unformatted flash detectedp.17254 Serial option [x] errorp.17254 Standard network software errorp.17254 Network [x] software errorp.17255 Unsupported option in slot [x]p.17356 Parallel port [x] disabledp.17356 Serial port [x] disabledp.17356 Standard USB port disabledp.17356 Standard parallel port disabledp.17356 USB port [x] disabledp.17357 Configuration change, some held jobs were not restoredp.17458 Input config errorp.17458 Too many bins attachedp.17458 Too many disks installedp.17458 Too many flash options installedp.17458 Too many trays attachedp.17559 Incompatible output bin [x]p.17561 Remove defective diskp.17562 Disk fullp.17580.xx Fuser near life warningp.17580.xx Fuser life warningp.17580.xx Replace fuserp.17680.xx Fuser missingp.17682.xx Waste toner bottle nearly fullp.17682.xx Replace waste toner bottlep.17682.xx Waste toner bottle missingp.17683.xx Transfer module life warningp.17683.xx Transfer module missingp.17683.xx Replace transfer modulep.17688.xx [color] cartridge nearly lowp.17688.xx [color] cartridge lowp.17788.xx [Color] cartridge very lowp.17788.xx [Color] cartridge critically lowp.1771565 Emulation error, load emulation optionp.177Solving printing problemsp.177Multiple-language PDF files do not printp.177Printer control panel display is blank or displays only diamondsp.178Error message about reading USB drive appearsp.178Print jobs do not printp.178Make sure there is no problem with your printerp.178Make sure the printer is ready to printp.178Check if a supply is missing or needs replacementp.178Check if the standard exit bin is fullp.178Check if the paper tray is emptyp.178Make sure the correct printer software is installedp.178Make sure the internal print server is working properlyp.178Make sure you are using a recommended USB, serial, or Ethernet cablep.179Make sure printer cables are securely connectedp.179Confidential and other held jobs do not printp.179Partial job, no job, or blank page printsp.179Make sure the printer has sufficient memoryp.179Print job takes longer than expectedp.179Reduce the complexity of the print jobp.179Turn off the Page Protect settingp.179Change the environmental settingsp.179Job prints from the wrong tray or on the wrong paperp.180Check the paper type and paper size settingsp.180Incorrect characters printp.180Tray linking does not workp.180Load the same size and type of paperp.180Use the same Paper Size and Paper Type settingsp.180Large jobs do not collatep.180Make sure Collate is set to Onp.180Reduce the complexity of the print jobp.180Make sure the printer has enough memoryp.181Unexpected page breaksp.181Increase the Print Timeout valuep.181Solving home screen application problemsp.181An application error has occurredp.181Check the system log for relevant detailsp.181Contact customer supportp.181Solving option problemsp.181Option does not operate correctly or quits after it is installedp.181Reset the printerp.181Check to see if the option is connected to the printerp.182Make sure the option is installedp.182Make sure the option is available in the printer driverp.182Make sure the option is selectedp.182Paper tray problemsp.182Make sure the paper is loaded correctlyp.182Reset the printerp.182Make sure the paper tray is installed correctlyp.1822,000-sheet drawer problemsp.182Check the drawer connectionp.182Load paperp.183Clear any jamsp.183Avoid paper jamsp.183Cannot detect flash memory cardp.183Cannot detect printer hard diskp.183Internal Solutions Port does not operate correctlyp.183Check the Internal Solutions Port (ISP) connectionsp.183Check the cablep.183Make sure the network software is configured correctlyp.183Internal print server does not operate correctlyp.184Check the print server connectionsp.184Make sure the network software is configured correctlyp.184Memory cardp.184USB/parallel interface card does not operate correctlyp.184Check the USB/parallel interface card connectionp.184Check the cablep.184Solving paper feed problemsp.184Paper frequently jamsp.184Check the paperp.184Make sure there is not too much paper in the paper trayp.184Check the paper guidesp.185The paper may have absorbed moisture due to high humidityp.185Paper jam message remains after jam is clearedp.185Check the paper pathp.185Jammed pages are not reprintedp.185Turn on Jam Recoveryp.185Solving print quality problemsp.185Printer is printing blank pagesp.185Make sure there is no packing material left on the toner or print cartridgep.185Make sure the toner or print cartridge is not low on tonerp.186Characters have jagged or uneven edgesp.186Clipped imagesp.186Check the guidesp.186Check the paper size settingp.186Fine horizontal lines appear on color pagesp.187Shadow images appear on printsp.187Check the paper type and weight settingsp.187Make sure the print cartridge is not low on tonerp.187Gray background on printsp.188Make sure there is no worn or defective print cartridgep.188Incorrect marginsp.188Check the paper guidesp.188Check the paper size settingp.188Light colored line, white line, or incorrectly colored line appears on printsp.189Make sure there is no defective print cartridgep.189Make sure the transfer belt is not defectivep.189Paper curlp.189Check the paper type and weight settingsp.189Load paper from a fresh packagep.189Print irregularitiesp.189Load paper from a fresh packagep.190Check the paper type and weight settingsp.190Avoid textured paper with rough finishesp.190Make sure there is no defective print cartridgep.190Make sure the transfer belt is not defectivep.190Make sure the fuser is not defectivep.190Print is too darkp.190Load paper from a fresh packagep.190Avoid textured paper with rough finishesp.190Check the Paper Type settingp.191Make sure there is no defective print cartridgep.191Print is too lightp.191Load paper from a fresh packagep.191Avoid textured paper with rough finishesp.191Check the Paper Type settingp.191Make sure the print cartridge is not low on tonerp.191Make sure there is no defective print cartridgep.192Repeating defects appear on printsp.192Replace the print cartridgep.192Replace the fuserp.192Skewed printp.192Check the paper guidesp.192Check the paperp.193Solid color or black pages appear on printsp.193Make sure the print cartridges are installed correctly, are not defective and not low on tonerp.193Black or white streaks appear on transparencies or paperp.193Ensure that the fill pattern is correctp.193Check the paper typep.193Make sure the print cartridge is not low on tonerp.194Streaked horizontal lines appear on printsp.194Select another tray or feederp.194Make sure there is no worn, defective, or empty print cartridgep.194Toner fog or background shading appears on a pagep.194Make sure print cartridges are installed correctly and are not defectivep.194Make sure the transfer belt is not worn or defectivep.194Make sure the fuser is not worn or defectivep.195Make sure there is no toner in the paper pathp.195Recalibrate the printerp.195Check the software program or applicationp.195Toner rubs offp.195Check the paper type and weight settingsp.195Check the paper texture settingp.195Make sure the fuser is not worn or defectivep.195Transparency print quality is poorp.196Check the transparenciesp.196Check the paper type settingp.196Uneven print densityp.196Make sure there is no defective or worn print cartridgep.196Solving color quality problemsp.196FAQ about color printingp.196Embedded Web Server does not openp.199Check the network connectionp.199Check the address entered in the Web browserp.199Temporarily disable Web proxy serversp.199Contacting customer supportp.199Noticesp.201Product informationp.201Edition noticep.201GOVERNMENT END USERSp.201Trademarksp.202Federal Communications Commission (FCC) compliance information statementp.203Modular component noticep.203Licensing noticesp.203Noise emission levelsp.203Waste from Electrical and Electronic Equipment (WEEE) directivep.204India E-Waste noticep.204Battery noticep.204Static sensitivity noticep.204ENERGY STARp.205Temperature informationp.205Laser noticep.205Laser advisory labelp.205Power consumptionp.206Product power consumptionp.206Sleep Modep.206Hibernate Modep.206Off modep.207Total energy usagep.207Japanese VCCI noticep.207European Community (EC) directives conformityp.207Radio interference noticep.208Regulatory notices for wireless productsp.208Exposure to radio frequency radiationp.208Industry Canada (Canada)p.208Notice to users in the European Unionp.209STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.211Patent acknowledgmentp.213Indexp.215
Page 218 of the Lexmark C 790 user manual — Table of contents
Page 218 · click to enlarge
Page 218

Table of contents

Contentsp.2Safety informationp.6Learning about the printerp.8Finding information about the printerp.8Selecting a location for the printerp.9Printer configurationsp.10Understanding the printer control panelp.11Understanding the home screenp.13Understanding the home screenp.13Using the touch-screen buttonsp.14Setting up and using the home screen applicationsp.17Finding the IP address of the printerp.17Finding the IP address of the computerp.17Accessing the Embedded Web Serverp.17Activating the home screen applicationsp.18Exporting and importing a configurationp.20Additional printer setupp.21Installing internal optionsp.21Available internal optionsp.21Using the security lock featurep.22Accessing the system boardp.22Installing a memory cardp.26Installing a flash memory or firmware cardp.28Installing an Internal Solutions Portp.29Installing a printer hard diskp.33Removing a printer hard diskp.37Order of installationp.39Installing optional traysp.39Supported finishing featuresp.40Attaching cablesp.42Verifying printer setupp.43Printing a menu settings pagep.43Printing a network setup pagep.44Setting up the printer softwarep.44Installing the printerp.44Adding available options in the print driverp.44Setting up wireless printingp.45Preparing to set up the printer on a wireless networkp.45Installing the printer on a wireless network (Windows)p.46Installing the printer on a wireless network (Macintosh)p.47Changing port settings after installing a new network ISPp.50Setting up serial printing (Windows only)p.51Minimizing your printer's environmental impactp.52Saving paper and tonerp.52Using recycled paperp.52Conserving suppliesp.52Saving energyp.53Using Hibernate modep.53Using Eco-Modep.53Reducing printer noisep.54Adjusting Sleep modep.54Adjusting the brightness of the printer displayp.54Recyclingp.55Recycling Lexmark productsp.55Recycling Lexmark packagingp.55Returning Lexmark cartridges for reuse or recyclingp.55Loading paper and specialty mediap.57Setting the paper size and typep.57Configuring Universal paper settingsp.57Loading the standard or optional 550-sheet trayp.57Loading the 2000-sheet high-capacity feederp.60Loading the multipurpose feederp.63Linking and unlinking traysp.65Linking and unlinking traysp.65Linking exit binsp.66Creating a custom name for a paper typep.66Assigning a custom paper typep.66Paper and specialty media guidep.68Paper guidelinesp.68Paper characteristicsp.68Unacceptable paperp.69Selecting paperp.69Selecting preprinted forms and letterheadp.69Using recycled paper and other office papersp.70Storing paperp.70Supported paper sizes, types, and weightsp.71Supported paper sizesp.71Supported paper types and weightsp.72Printingp.74Printing a documentp.74Printing a documentp.74Printing in black and whitep.74Adjusting toner darknessp.74Printing from a flash drive or mobile devicep.75Printing from a flash drivep.75Supported flash drives and file typesp.76Printing from a mobile devicep.76Printing specialty documentsp.76Tips on using letterheadp.76Tips on using transparenciesp.77Tips on using envelopesp.77Tips on using labelsp.78Tips on using card stockp.78Printing confidential and other held jobsp.79Storing print jobs in the printerp.79Printing confidential and other held jobsp.79Printing information pagesp.80Printing a font sample listp.80Printing a directory listp.80Canceling a print jobp.81Canceling a print job from the printer control panelp.81Canceling a print job from the computerp.81Understanding the printer menusp.82Menus listp.82Supplies menup.83Paper menup.84Default Source menup.84Paper Size/Type menup.85Configure MP menup.88Substitute Size menup.88Paper Texture menup.88Paper Weight menup.90Paper Loading menup.92Custom Types menup.93Custom Names menup.94Custom Bin Names menup.94Universal Setup menup.94Bin Setup menup.95Reports menup.96Reports menup.96Network/Ports menup.97Active NIC menup.97Standard Network or Network [x] menusp.97Network Reports menup.99Network Card menup.99TCP/IP menup.99IPv6 menup.100Wireless menup.101AppleTalk menup.102Standard USB menup.102Parallel [x] menup.104Serial [x] menup.106SMTP Setup menup.108Security menup.110Miscellaneous Security Settings menup.110Confidential Print menup.110Erase Temporary Data Files menup.111Security Audit Log menup.112Set Date and Time menup.112Settings menup.113General Settings menup.113Flash Drive menup.119Setup menup.121Job Accounting menup.121Finishing menup.123Quality menup.125Utilities menup.128XPS menup.128PDF menup.128PostScript menup.129PCL Emul menup.129HTML menup.132Image menup.133Help menup.133Securing the memory before moving the printerp.135Statement of Volatilityp.135Erasing volatile memoryp.135Erasing non-volatile memoryp.135Erasing printer hard disk memoryp.136Configuring printer hard disk encryptionp.136Maintaining the printerp.138Cleaning the exterior of the printerp.138Cleaning the printhead lensesp.138Storing suppliesp.139Checking the status of suppliesp.140Checking the status of supplies from the printer control panelp.140Checking the status of supplies from a network computerp.140Ordering suppliesp.140Ordering a print cartridgep.140Ordering a fuser or a transfer modulep.141Ordering a waste toner bottlep.141Ordering staple cartridgesp.141Ordering a cleaning kitp.142Replacing suppliesp.142Replacing a print cartridgep.142Replacing the waste toner bottlep.145Moving the printerp.146Before moving the printerp.146Moving the printer to another locationp.147Shipping the printerp.147Administrative supportp.148Finding advanced networking and administrator informationp.148Using the Embedded Web Serverp.148Checking the virtual displayp.148Checking the status of the printerp.148Setting up e-mail alertsp.149Viewing reportsp.149Restoring factory default settingsp.149Clearing jamsp.151Avoiding jamsp.151Understanding jam numbers and locationsp.151200 paper jamp.153201 paper jamp.153202–203 paper jamsp.154230 paper jamp.155231–239 paper jamsp.15624x paper jamp.156250 paper jamp.157400–403 and 460–461 paper jamsp.158431–454, and 456–458 paper jamsp.159455 staple jamp.159Troubleshootingp.162Checking an unresponsive printerp.162Understanding the printer messagesp.162Adjusting colorp.162An error has occurred with the USB drive. Please remove and reinsert drive.p.162Change [paper source] to [custom type name]p.162Change [paper source] to [custom type name] load [orientation]p.162Change [paper source] to [custom string]p.163Change [paper source] to [custom string] load [orientation]p.163Change [paper source] to [paper size] [paper type]p.163Change [paper source] to [paper size] [paper type] load [orientation]p.163Close paper transport coverp.163Close left side doorp.163Close [tray] doorp.164Close finisher side doorp.164Close finisher top coverp.164Close front doorp.164Disk corruptedp.164Disk near full. Securely clearing disk space.p.164Disk problemp.164Empty the hole punch boxp.164Error reading USB drive. Remove USB.p.165Insert staple cartridgep.165Insert Tray [x]p.165Insert the hole punch boxp.165Install bin [x]p.165Install envelope feederp.165Install Tray [x]p.166Load [src] with [custom type name]p.166Load [src] with [custom string]p.166Load [src] with [size]p.166Load [src] with [type] [size]p.167Load Manual Feeder with [custom type name]p.167Load Manual Feeder with [custom string]p.167Load Manual Feeder with [paper type] [paper size]p.167Load staplesp.167Paper changes neededp.168Reattach bin [x]p.168Reattach bin [x] – [y]p.168Remove paper from standard output binp.169Remove paper from bin [x]p.169Remove paper from all binsp.169Remove paper from [linked set bin name]p.169Remove packaging material, [area name]p.169Restore held jobs?p.169Slide finisher to the leftp.169Some held jobs were not restoredp.169Supply needed to complete jobp.169Unsupported diskp.16931.xx Missing or defective [color] cartridgep.17032.xx [color] cartridge part number unsupported by devicep.17034 Incorrect paper size, open [src]p.17035 Insufficient memory to support Resource Save featurep.17036 Printer service requiredp.17037 Insufficient memory to collate jobp.17137 Insufficient memory for Flash Memory Defragment operationp.17137 Insufficient memory, some Held Jobs were deletedp.17137 Insufficient memory, some held jobs will not be restoredp.17138 Memory fullp.17139 Complex page, some data may not have printedp.17140 [color] invalid refill, change cartridgep.17151 Defective flash detectedp.17252 Not enough free space in flash memory for resourcesp.17253 Unformatted flash detectedp.17254 Serial option [x] errorp.17254 Standard network software errorp.17254 Network [x] software errorp.17255 Unsupported option in slot [x]p.17356 Parallel port [x] disabledp.17356 Serial port [x] disabledp.17356 Standard USB port disabledp.17356 Standard parallel port disabledp.17356 USB port [x] disabledp.17357 Configuration change, some held jobs were not restoredp.17458 Input config errorp.17458 Too many bins attachedp.17458 Too many disks installedp.17458 Too many flash options installedp.17458 Too many trays attachedp.17559 Incompatible output bin [x]p.17561 Remove defective diskp.17562 Disk fullp.17580.xx Fuser near life warningp.17580.xx Fuser life warningp.17580.xx Replace fuserp.17680.xx Fuser missingp.17682.xx Waste toner bottle nearly fullp.17682.xx Replace waste toner bottlep.17682.xx Waste toner bottle missingp.17683.xx Transfer module life warningp.17683.xx Transfer module missingp.17683.xx Replace transfer modulep.17688.xx [color] cartridge nearly lowp.17688.xx [color] cartridge lowp.17788.xx [Color] cartridge very lowp.17788.xx [Color] cartridge critically lowp.1771565 Emulation error, load emulation optionp.177Solving printing problemsp.177Multiple-language PDF files do not printp.177Printer control panel display is blank or displays only diamondsp.178Error message about reading USB drive appearsp.178Print jobs do not printp.178Make sure there is no problem with your printerp.178Make sure the printer is ready to printp.178Check if a supply is missing or needs replacementp.178Check if the standard exit bin is fullp.178Check if the paper tray is emptyp.178Make sure the correct printer software is installedp.178Make sure the internal print server is working properlyp.178Make sure you are using a recommended USB, serial, or Ethernet cablep.179Make sure printer cables are securely connectedp.179Confidential and other held jobs do not printp.179Partial job, no job, or blank page printsp.179Make sure the printer has sufficient memoryp.179Print job takes longer than expectedp.179Reduce the complexity of the print jobp.179Turn off the Page Protect settingp.179Change the environmental settingsp.179Job prints from the wrong tray or on the wrong paperp.180Check the paper type and paper size settingsp.180Incorrect characters printp.180Tray linking does not workp.180Load the same size and type of paperp.180Use the same Paper Size and Paper Type settingsp.180Large jobs do not collatep.180Make sure Collate is set to Onp.180Reduce the complexity of the print jobp.180Make sure the printer has enough memoryp.181Unexpected page breaksp.181Increase the Print Timeout valuep.181Solving home screen application problemsp.181An application error has occurredp.181Check the system log for relevant detailsp.181Contact customer supportp.181Solving option problemsp.181Option does not operate correctly or quits after it is installedp.181Reset the printerp.181Check to see if the option is connected to the printerp.182Make sure the option is installedp.182Make sure the option is available in the printer driverp.182Make sure the option is selectedp.182Paper tray problemsp.182Make sure the paper is loaded correctlyp.182Reset the printerp.182Make sure the paper tray is installed correctlyp.1822,000-sheet drawer problemsp.182Check the drawer connectionp.182Load paperp.183Clear any jamsp.183Avoid paper jamsp.183Cannot detect flash memory cardp.183Cannot detect printer hard diskp.183Internal Solutions Port does not operate correctlyp.183Check the Internal Solutions Port (ISP) connectionsp.183Check the cablep.183Make sure the network software is configured correctlyp.183Internal print server does not operate correctlyp.184Check the print server connectionsp.184Make sure the network software is configured correctlyp.184Memory cardp.184USB/parallel interface card does not operate correctlyp.184Check the USB/parallel interface card connectionp.184Check the cablep.184Solving paper feed problemsp.184Paper frequently jamsp.184Check the paperp.184Make sure there is not too much paper in the paper trayp.184Check the paper guidesp.185The paper may have absorbed moisture due to high humidityp.185Paper jam message remains after jam is clearedp.185Check the paper pathp.185Jammed pages are not reprintedp.185Turn on Jam Recoveryp.185Solving print quality problemsp.185Printer is printing blank pagesp.185Make sure there is no packing material left on the toner or print cartridgep.185Make sure the toner or print cartridge is not low on tonerp.186Characters have jagged or uneven edgesp.186Clipped imagesp.186Check the guidesp.186Check the paper size settingp.186Fine horizontal lines appear on color pagesp.187Shadow images appear on printsp.187Check the paper type and weight settingsp.187Make sure the print cartridge is not low on tonerp.187Gray background on printsp.188Make sure there is no worn or defective print cartridgep.188Incorrect marginsp.188Check the paper guidesp.188Check the paper size settingp.188Light colored line, white line, or incorrectly colored line appears on printsp.189Make sure there is no defective print cartridgep.189Make sure the transfer belt is not defectivep.189Paper curlp.189Check the paper type and weight settingsp.189Load paper from a fresh packagep.189Print irregularitiesp.189Load paper from a fresh packagep.190Check the paper type and weight settingsp.190Avoid textured paper with rough finishesp.190Make sure there is no defective print cartridgep.190Make sure the transfer belt is not defectivep.190Make sure the fuser is not defectivep.190Print is too darkp.190Load paper from a fresh packagep.190Avoid textured paper with rough finishesp.190Check the Paper Type settingp.191Make sure there is no defective print cartridgep.191Print is too lightp.191Load paper from a fresh packagep.191Avoid textured paper with rough finishesp.191Check the Paper Type settingp.191Make sure the print cartridge is not low on tonerp.191Make sure there is no defective print cartridgep.192Repeating defects appear on printsp.192Replace the print cartridgep.192Replace the fuserp.192Skewed printp.192Check the paper guidesp.192Check the paperp.193Solid color or black pages appear on printsp.193Make sure the print cartridges are installed correctly, are not defective and not low on tonerp.193Black or white streaks appear on transparencies or paperp.193Ensure that the fill pattern is correctp.193Check the paper typep.193Make sure the print cartridge is not low on tonerp.194Streaked horizontal lines appear on printsp.194Select another tray or feederp.194Make sure there is no worn, defective, or empty print cartridgep.194Toner fog or background shading appears on a pagep.194Make sure print cartridges are installed correctly and are not defectivep.194Make sure the transfer belt is not worn or defectivep.194Make sure the fuser is not worn or defectivep.195Make sure there is no toner in the paper pathp.195Recalibrate the printerp.195Check the software program or applicationp.195Toner rubs offp.195Check the paper type and weight settingsp.195Check the paper texture settingp.195Make sure the fuser is not worn or defectivep.195Transparency print quality is poorp.196Check the transparenciesp.196Check the paper type settingp.196Uneven print densityp.196Make sure there is no defective or worn print cartridgep.196Solving color quality problemsp.196FAQ about color printingp.196Embedded Web Server does not openp.199Check the network connectionp.199Check the address entered in the Web browserp.199Temporarily disable Web proxy serversp.199Contacting customer supportp.199Noticesp.201Product informationp.201Edition noticep.201GOVERNMENT END USERSp.201Trademarksp.202Federal Communications Commission (FCC) compliance information statementp.203Modular component noticep.203Licensing noticesp.203Noise emission levelsp.203Waste from Electrical and Electronic Equipment (WEEE) directivep.204India E-Waste noticep.204Battery noticep.204Static sensitivity noticep.204ENERGY STARp.205Temperature informationp.205Laser noticep.205Laser advisory labelp.205Power consumptionp.206Product power consumptionp.206Sleep Modep.206Hibernate Modep.206Off modep.207Total energy usagep.207Japanese VCCI noticep.207European Community (EC) directives conformityp.207Radio interference noticep.208Regulatory notices for wireless productsp.208Exposure to radio frequency radiationp.208Industry Canada (Canada)p.208Notice to users in the European Unionp.209STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.211Patent acknowledgmentp.213Indexp.215
Page 219 of the Lexmark C 790 user manual — Table of contents
Page 219 · click to enlarge
Page 219

Table of contents

Contentsp.2Safety informationp.6Learning about the printerp.8Finding information about the printerp.8Selecting a location for the printerp.9Printer configurationsp.10Understanding the printer control panelp.11Understanding the home screenp.13Understanding the home screenp.13Using the touch-screen buttonsp.14Setting up and using the home screen applicationsp.17Finding the IP address of the printerp.17Finding the IP address of the computerp.17Accessing the Embedded Web Serverp.17Activating the home screen applicationsp.18Exporting and importing a configurationp.20Additional printer setupp.21Installing internal optionsp.21Available internal optionsp.21Using the security lock featurep.22Accessing the system boardp.22Installing a memory cardp.26Installing a flash memory or firmware cardp.28Installing an Internal Solutions Portp.29Installing a printer hard diskp.33Removing a printer hard diskp.37Order of installationp.39Installing optional traysp.39Supported finishing featuresp.40Attaching cablesp.42Verifying printer setupp.43Printing a menu settings pagep.43Printing a network setup pagep.44Setting up the printer softwarep.44Installing the printerp.44Adding available options in the print driverp.44Setting up wireless printingp.45Preparing to set up the printer on a wireless networkp.45Installing the printer on a wireless network (Windows)p.46Installing the printer on a wireless network (Macintosh)p.47Changing port settings after installing a new network ISPp.50Setting up serial printing (Windows only)p.51Minimizing your printer's environmental impactp.52Saving paper and tonerp.52Using recycled paperp.52Conserving suppliesp.52Saving energyp.53Using Hibernate modep.53Using Eco-Modep.53Reducing printer noisep.54Adjusting Sleep modep.54Adjusting the brightness of the printer displayp.54Recyclingp.55Recycling Lexmark productsp.55Recycling Lexmark packagingp.55Returning Lexmark cartridges for reuse or recyclingp.55Loading paper and specialty mediap.57Setting the paper size and typep.57Configuring Universal paper settingsp.57Loading the standard or optional 550-sheet trayp.57Loading the 2000-sheet high-capacity feederp.60Loading the multipurpose feederp.63Linking and unlinking traysp.65Linking and unlinking traysp.65Linking exit binsp.66Creating a custom name for a paper typep.66Assigning a custom paper typep.66Paper and specialty media guidep.68Paper guidelinesp.68Paper characteristicsp.68Unacceptable paperp.69Selecting paperp.69Selecting preprinted forms and letterheadp.69Using recycled paper and other office papersp.70Storing paperp.70Supported paper sizes, types, and weightsp.71Supported paper sizesp.71Supported paper types and weightsp.72Printingp.74Printing a documentp.74Printing a documentp.74Printing in black and whitep.74Adjusting toner darknessp.74Printing from a flash drive or mobile devicep.75Printing from a flash drivep.75Supported flash drives and file typesp.76Printing from a mobile devicep.76Printing specialty documentsp.76Tips on using letterheadp.76Tips on using transparenciesp.77Tips on using envelopesp.77Tips on using labelsp.78Tips on using card stockp.78Printing confidential and other held jobsp.79Storing print jobs in the printerp.79Printing confidential and other held jobsp.79Printing information pagesp.80Printing a font sample listp.80Printing a directory listp.80Canceling a print jobp.81Canceling a print job from the printer control panelp.81Canceling a print job from the computerp.81Understanding the printer menusp.82Menus listp.82Supplies menup.83Paper menup.84Default Source menup.84Paper Size/Type menup.85Configure MP menup.88Substitute Size menup.88Paper Texture menup.88Paper Weight menup.90Paper Loading menup.92Custom Types menup.93Custom Names menup.94Custom Bin Names menup.94Universal Setup menup.94Bin Setup menup.95Reports menup.96Reports menup.96Network/Ports menup.97Active NIC menup.97Standard Network or Network [x] menusp.97Network Reports menup.99Network Card menup.99TCP/IP menup.99IPv6 menup.100Wireless menup.101AppleTalk menup.102Standard USB menup.102Parallel [x] menup.104Serial [x] menup.106SMTP Setup menup.108Security menup.110Miscellaneous Security Settings menup.110Confidential Print menup.110Erase Temporary Data Files menup.111Security Audit Log menup.112Set Date and Time menup.112Settings menup.113General Settings menup.113Flash Drive menup.119Setup menup.121Job Accounting menup.121Finishing menup.123Quality menup.125Utilities menup.128XPS menup.128PDF menup.128PostScript menup.129PCL Emul menup.129HTML menup.132Image menup.133Help menup.133Securing the memory before moving the printerp.135Statement of Volatilityp.135Erasing volatile memoryp.135Erasing non-volatile memoryp.135Erasing printer hard disk memoryp.136Configuring printer hard disk encryptionp.136Maintaining the printerp.138Cleaning the exterior of the printerp.138Cleaning the printhead lensesp.138Storing suppliesp.139Checking the status of suppliesp.140Checking the status of supplies from the printer control panelp.140Checking the status of supplies from a network computerp.140Ordering suppliesp.140Ordering a print cartridgep.140Ordering a fuser or a transfer modulep.141Ordering a waste toner bottlep.141Ordering staple cartridgesp.141Ordering a cleaning kitp.142Replacing suppliesp.142Replacing a print cartridgep.142Replacing the waste toner bottlep.145Moving the printerp.146Before moving the printerp.146Moving the printer to another locationp.147Shipping the printerp.147Administrative supportp.148Finding advanced networking and administrator informationp.148Using the Embedded Web Serverp.148Checking the virtual displayp.148Checking the status of the printerp.148Setting up e-mail alertsp.149Viewing reportsp.149Restoring factory default settingsp.149Clearing jamsp.151Avoiding jamsp.151Understanding jam numbers and locationsp.151200 paper jamp.153201 paper jamp.153202–203 paper jamsp.154230 paper jamp.155231–239 paper jamsp.15624x paper jamp.156250 paper jamp.157400–403 and 460–461 paper jamsp.158431–454, and 456–458 paper jamsp.159455 staple jamp.159Troubleshootingp.162Checking an unresponsive printerp.162Understanding the printer messagesp.162Adjusting colorp.162An error has occurred with the USB drive. Please remove and reinsert drive.p.162Change [paper source] to [custom type name]p.162Change [paper source] to [custom type name] load [orientation]p.162Change [paper source] to [custom string]p.163Change [paper source] to [custom string] load [orientation]p.163Change [paper source] to [paper size] [paper type]p.163Change [paper source] to [paper size] [paper type] load [orientation]p.163Close paper transport coverp.163Close left side doorp.163Close [tray] doorp.164Close finisher side doorp.164Close finisher top coverp.164Close front doorp.164Disk corruptedp.164Disk near full. Securely clearing disk space.p.164Disk problemp.164Empty the hole punch boxp.164Error reading USB drive. Remove USB.p.165Insert staple cartridgep.165Insert Tray [x]p.165Insert the hole punch boxp.165Install bin [x]p.165Install envelope feederp.165Install Tray [x]p.166Load [src] with [custom type name]p.166Load [src] with [custom string]p.166Load [src] with [size]p.166Load [src] with [type] [size]p.167Load Manual Feeder with [custom type name]p.167Load Manual Feeder with [custom string]p.167Load Manual Feeder with [paper type] [paper size]p.167Load staplesp.167Paper changes neededp.168Reattach bin [x]p.168Reattach bin [x] – [y]p.168Remove paper from standard output binp.169Remove paper from bin [x]p.169Remove paper from all binsp.169Remove paper from [linked set bin name]p.169Remove packaging material, [area name]p.169Restore held jobs?p.169Slide finisher to the leftp.169Some held jobs were not restoredp.169Supply needed to complete jobp.169Unsupported diskp.16931.xx Missing or defective [color] cartridgep.17032.xx [color] cartridge part number unsupported by devicep.17034 Incorrect paper size, open [src]p.17035 Insufficient memory to support Resource Save featurep.17036 Printer service requiredp.17037 Insufficient memory to collate jobp.17137 Insufficient memory for Flash Memory Defragment operationp.17137 Insufficient memory, some Held Jobs were deletedp.17137 Insufficient memory, some held jobs will not be restoredp.17138 Memory fullp.17139 Complex page, some data may not have printedp.17140 [color] invalid refill, change cartridgep.17151 Defective flash detectedp.17252 Not enough free space in flash memory for resourcesp.17253 Unformatted flash detectedp.17254 Serial option [x] errorp.17254 Standard network software errorp.17254 Network [x] software errorp.17255 Unsupported option in slot [x]p.17356 Parallel port [x] disabledp.17356 Serial port [x] disabledp.17356 Standard USB port disabledp.17356 Standard parallel port disabledp.17356 USB port [x] disabledp.17357 Configuration change, some held jobs were not restoredp.17458 Input config errorp.17458 Too many bins attachedp.17458 Too many disks installedp.17458 Too many flash options installedp.17458 Too many trays attachedp.17559 Incompatible output bin [x]p.17561 Remove defective diskp.17562 Disk fullp.17580.xx Fuser near life warningp.17580.xx Fuser life warningp.17580.xx Replace fuserp.17680.xx Fuser missingp.17682.xx Waste toner bottle nearly fullp.17682.xx Replace waste toner bottlep.17682.xx Waste toner bottle missingp.17683.xx Transfer module life warningp.17683.xx Transfer module missingp.17683.xx Replace transfer modulep.17688.xx [color] cartridge nearly lowp.17688.xx [color] cartridge lowp.17788.xx [Color] cartridge very lowp.17788.xx [Color] cartridge critically lowp.1771565 Emulation error, load emulation optionp.177Solving printing problemsp.177Multiple-language PDF files do not printp.177Printer control panel display is blank or displays only diamondsp.178Error message about reading USB drive appearsp.178Print jobs do not printp.178Make sure there is no problem with your printerp.178Make sure the printer is ready to printp.178Check if a supply is missing or needs replacementp.178Check if the standard exit bin is fullp.178Check if the paper tray is emptyp.178Make sure the correct printer software is installedp.178Make sure the internal print server is working properlyp.178Make sure you are using a recommended USB, serial, or Ethernet cablep.179Make sure printer cables are securely connectedp.179Confidential and other held jobs do not printp.179Partial job, no job, or blank page printsp.179Make sure the printer has sufficient memoryp.179Print job takes longer than expectedp.179Reduce the complexity of the print jobp.179Turn off the Page Protect settingp.179Change the environmental settingsp.179Job prints from the wrong tray or on the wrong paperp.180Check the paper type and paper size settingsp.180Incorrect characters printp.180Tray linking does not workp.180Load the same size and type of paperp.180Use the same Paper Size and Paper Type settingsp.180Large jobs do not collatep.180Make sure Collate is set to Onp.180Reduce the complexity of the print jobp.180Make sure the printer has enough memoryp.181Unexpected page breaksp.181Increase the Print Timeout valuep.181Solving home screen application problemsp.181An application error has occurredp.181Check the system log for relevant detailsp.181Contact customer supportp.181Solving option problemsp.181Option does not operate correctly or quits after it is installedp.181Reset the printerp.181Check to see if the option is connected to the printerp.182Make sure the option is installedp.182Make sure the option is available in the printer driverp.182Make sure the option is selectedp.182Paper tray problemsp.182Make sure the paper is loaded correctlyp.182Reset the printerp.182Make sure the paper tray is installed correctlyp.1822,000-sheet drawer problemsp.182Check the drawer connectionp.182Load paperp.183Clear any jamsp.183Avoid paper jamsp.183Cannot detect flash memory cardp.183Cannot detect printer hard diskp.183Internal Solutions Port does not operate correctlyp.183Check the Internal Solutions Port (ISP) connectionsp.183Check the cablep.183Make sure the network software is configured correctlyp.183Internal print server does not operate correctlyp.184Check the print server connectionsp.184Make sure the network software is configured correctlyp.184Memory cardp.184USB/parallel interface card does not operate correctlyp.184Check the USB/parallel interface card connectionp.184Check the cablep.184Solving paper feed problemsp.184Paper frequently jamsp.184Check the paperp.184Make sure there is not too much paper in the paper trayp.184Check the paper guidesp.185The paper may have absorbed moisture due to high humidityp.185Paper jam message remains after jam is clearedp.185Check the paper pathp.185Jammed pages are not reprintedp.185Turn on Jam Recoveryp.185Solving print quality problemsp.185Printer is printing blank pagesp.185Make sure there is no packing material left on the toner or print cartridgep.185Make sure the toner or print cartridge is not low on tonerp.186Characters have jagged or uneven edgesp.186Clipped imagesp.186Check the guidesp.186Check the paper size settingp.186Fine horizontal lines appear on color pagesp.187Shadow images appear on printsp.187Check the paper type and weight settingsp.187Make sure the print cartridge is not low on tonerp.187Gray background on printsp.188Make sure there is no worn or defective print cartridgep.188Incorrect marginsp.188Check the paper guidesp.188Check the paper size settingp.188Light colored line, white line, or incorrectly colored line appears on printsp.189Make sure there is no defective print cartridgep.189Make sure the transfer belt is not defectivep.189Paper curlp.189Check the paper type and weight settingsp.189Load paper from a fresh packagep.189Print irregularitiesp.189Load paper from a fresh packagep.190Check the paper type and weight settingsp.190Avoid textured paper with rough finishesp.190Make sure there is no defective print cartridgep.190Make sure the transfer belt is not defectivep.190Make sure the fuser is not defectivep.190Print is too darkp.190Load paper from a fresh packagep.190Avoid textured paper with rough finishesp.190Check the Paper Type settingp.191Make sure there is no defective print cartridgep.191Print is too lightp.191Load paper from a fresh packagep.191Avoid textured paper with rough finishesp.191Check the Paper Type settingp.191Make sure the print cartridge is not low on tonerp.191Make sure there is no defective print cartridgep.192Repeating defects appear on printsp.192Replace the print cartridgep.192Replace the fuserp.192Skewed printp.192Check the paper guidesp.192Check the paperp.193Solid color or black pages appear on printsp.193Make sure the print cartridges are installed correctly, are not defective and not low on tonerp.193Black or white streaks appear on transparencies or paperp.193Ensure that the fill pattern is correctp.193Check the paper typep.193Make sure the print cartridge is not low on tonerp.194Streaked horizontal lines appear on printsp.194Select another tray or feederp.194Make sure there is no worn, defective, or empty print cartridgep.194Toner fog or background shading appears on a pagep.194Make sure print cartridges are installed correctly and are not defectivep.194Make sure the transfer belt is not worn or defectivep.194Make sure the fuser is not worn or defectivep.195Make sure there is no toner in the paper pathp.195Recalibrate the printerp.195Check the software program or applicationp.195Toner rubs offp.195Check the paper type and weight settingsp.195Check the paper texture settingp.195Make sure the fuser is not worn or defectivep.195Transparency print quality is poorp.196Check the transparenciesp.196Check the paper type settingp.196Uneven print densityp.196Make sure there is no defective or worn print cartridgep.196Solving color quality problemsp.196FAQ about color printingp.196Embedded Web Server does not openp.199Check the network connectionp.199Check the address entered in the Web browserp.199Temporarily disable Web proxy serversp.199Contacting customer supportp.199Noticesp.201Product informationp.201Edition noticep.201GOVERNMENT END USERSp.201Trademarksp.202Federal Communications Commission (FCC) compliance information statementp.203Modular component noticep.203Licensing noticesp.203Noise emission levelsp.203Waste from Electrical and Electronic Equipment (WEEE) directivep.204India E-Waste noticep.204Battery noticep.204Static sensitivity noticep.204ENERGY STARp.205Temperature informationp.205Laser noticep.205Laser advisory labelp.205Power consumptionp.206Product power consumptionp.206Sleep Modep.206Hibernate Modep.206Off modep.207Total energy usagep.207Japanese VCCI noticep.207European Community (EC) directives conformityp.207Radio interference noticep.208Regulatory notices for wireless productsp.208Exposure to radio frequency radiationp.208Industry Canada (Canada)p.208Notice to users in the European Unionp.209STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.211Patent acknowledgmentp.213Indexp.215
Page 220 of the Lexmark C 790 user manual — Table of contents
Page 220 · click to enlarge
Page 220

Table of contents

Contentsp.2Safety informationp.6Learning about the printerp.8Finding information about the printerp.8Selecting a location for the printerp.9Printer configurationsp.10Understanding the printer control panelp.11Understanding the home screenp.13Understanding the home screenp.13Using the touch-screen buttonsp.14Setting up and using the home screen applicationsp.17Finding the IP address of the printerp.17Finding the IP address of the computerp.17Accessing the Embedded Web Serverp.17Activating the home screen applicationsp.18Exporting and importing a configurationp.20Additional printer setupp.21Installing internal optionsp.21Available internal optionsp.21Using the security lock featurep.22Accessing the system boardp.22Installing a memory cardp.26Installing a flash memory or firmware cardp.28Installing an Internal Solutions Portp.29Installing a printer hard diskp.33Removing a printer hard diskp.37Order of installationp.39Installing optional traysp.39Supported finishing featuresp.40Attaching cablesp.42Verifying printer setupp.43Printing a menu settings pagep.43Printing a network setup pagep.44Setting up the printer softwarep.44Installing the printerp.44Adding available options in the print driverp.44Setting up wireless printingp.45Preparing to set up the printer on a wireless networkp.45Installing the printer on a wireless network (Windows)p.46Installing the printer on a wireless network (Macintosh)p.47Changing port settings after installing a new network ISPp.50Setting up serial printing (Windows only)p.51Minimizing your printer's environmental impactp.52Saving paper and tonerp.52Using recycled paperp.52Conserving suppliesp.52Saving energyp.53Using Hibernate modep.53Using Eco-Modep.53Reducing printer noisep.54Adjusting Sleep modep.54Adjusting the brightness of the printer displayp.54Recyclingp.55Recycling Lexmark productsp.55Recycling Lexmark packagingp.55Returning Lexmark cartridges for reuse or recyclingp.55Loading paper and specialty mediap.57Setting the paper size and typep.57Configuring Universal paper settingsp.57Loading the standard or optional 550-sheet trayp.57Loading the 2000-sheet high-capacity feederp.60Loading the multipurpose feederp.63Linking and unlinking traysp.65Linking and unlinking traysp.65Linking exit binsp.66Creating a custom name for a paper typep.66Assigning a custom paper typep.66Paper and specialty media guidep.68Paper guidelinesp.68Paper characteristicsp.68Unacceptable paperp.69Selecting paperp.69Selecting preprinted forms and letterheadp.69Using recycled paper and other office papersp.70Storing paperp.70Supported paper sizes, types, and weightsp.71Supported paper sizesp.71Supported paper types and weightsp.72Printingp.74Printing a documentp.74Printing a documentp.74Printing in black and whitep.74Adjusting toner darknessp.74Printing from a flash drive or mobile devicep.75Printing from a flash drivep.75Supported flash drives and file typesp.76Printing from a mobile devicep.76Printing specialty documentsp.76Tips on using letterheadp.76Tips on using transparenciesp.77Tips on using envelopesp.77Tips on using labelsp.78Tips on using card stockp.78Printing confidential and other held jobsp.79Storing print jobs in the printerp.79Printing confidential and other held jobsp.79Printing information pagesp.80Printing a font sample listp.80Printing a directory listp.80Canceling a print jobp.81Canceling a print job from the printer control panelp.81Canceling a print job from the computerp.81Understanding the printer menusp.82Menus listp.82Supplies menup.83Paper menup.84Default Source menup.84Paper Size/Type menup.85Configure MP menup.88Substitute Size menup.88Paper Texture menup.88Paper Weight menup.90Paper Loading menup.92Custom Types menup.93Custom Names menup.94Custom Bin Names menup.94Universal Setup menup.94Bin Setup menup.95Reports menup.96Reports menup.96Network/Ports menup.97Active NIC menup.97Standard Network or Network [x] menusp.97Network Reports menup.99Network Card menup.99TCP/IP menup.99IPv6 menup.100Wireless menup.101AppleTalk menup.102Standard USB menup.102Parallel [x] menup.104Serial [x] menup.106SMTP Setup menup.108Security menup.110Miscellaneous Security Settings menup.110Confidential Print menup.110Erase Temporary Data Files menup.111Security Audit Log menup.112Set Date and Time menup.112Settings menup.113General Settings menup.113Flash Drive menup.119Setup menup.121Job Accounting menup.121Finishing menup.123Quality menup.125Utilities menup.128XPS menup.128PDF menup.128PostScript menup.129PCL Emul menup.129HTML menup.132Image menup.133Help menup.133Securing the memory before moving the printerp.135Statement of Volatilityp.135Erasing volatile memoryp.135Erasing non-volatile memoryp.135Erasing printer hard disk memoryp.136Configuring printer hard disk encryptionp.136Maintaining the printerp.138Cleaning the exterior of the printerp.138Cleaning the printhead lensesp.138Storing suppliesp.139Checking the status of suppliesp.140Checking the status of supplies from the printer control panelp.140Checking the status of supplies from a network computerp.140Ordering suppliesp.140Ordering a print cartridgep.140Ordering a fuser or a transfer modulep.141Ordering a waste toner bottlep.141Ordering staple cartridgesp.141Ordering a cleaning kitp.142Replacing suppliesp.142Replacing a print cartridgep.142Replacing the waste toner bottlep.145Moving the printerp.146Before moving the printerp.146Moving the printer to another locationp.147Shipping the printerp.147Administrative supportp.148Finding advanced networking and administrator informationp.148Using the Embedded Web Serverp.148Checking the virtual displayp.148Checking the status of the printerp.148Setting up e-mail alertsp.149Viewing reportsp.149Restoring factory default settingsp.149Clearing jamsp.151Avoiding jamsp.151Understanding jam numbers and locationsp.151200 paper jamp.153201 paper jamp.153202–203 paper jamsp.154230 paper jamp.155231–239 paper jamsp.15624x paper jamp.156250 paper jamp.157400–403 and 460–461 paper jamsp.158431–454, and 456–458 paper jamsp.159455 staple jamp.159Troubleshootingp.162Checking an unresponsive printerp.162Understanding the printer messagesp.162Adjusting colorp.162An error has occurred with the USB drive. Please remove and reinsert drive.p.162Change [paper source] to [custom type name]p.162Change [paper source] to [custom type name] load [orientation]p.162Change [paper source] to [custom string]p.163Change [paper source] to [custom string] load [orientation]p.163Change [paper source] to [paper size] [paper type]p.163Change [paper source] to [paper size] [paper type] load [orientation]p.163Close paper transport coverp.163Close left side doorp.163Close [tray] doorp.164Close finisher side doorp.164Close finisher top coverp.164Close front doorp.164Disk corruptedp.164Disk near full. Securely clearing disk space.p.164Disk problemp.164Empty the hole punch boxp.164Error reading USB drive. Remove USB.p.165Insert staple cartridgep.165Insert Tray [x]p.165Insert the hole punch boxp.165Install bin [x]p.165Install envelope feederp.165Install Tray [x]p.166Load [src] with [custom type name]p.166Load [src] with [custom string]p.166Load [src] with [size]p.166Load [src] with [type] [size]p.167Load Manual Feeder with [custom type name]p.167Load Manual Feeder with [custom string]p.167Load Manual Feeder with [paper type] [paper size]p.167Load staplesp.167Paper changes neededp.168Reattach bin [x]p.168Reattach bin [x] – [y]p.168Remove paper from standard output binp.169Remove paper from bin [x]p.169Remove paper from all binsp.169Remove paper from [linked set bin name]p.169Remove packaging material, [area name]p.169Restore held jobs?p.169Slide finisher to the leftp.169Some held jobs were not restoredp.169Supply needed to complete jobp.169Unsupported diskp.16931.xx Missing or defective [color] cartridgep.17032.xx [color] cartridge part number unsupported by devicep.17034 Incorrect paper size, open [src]p.17035 Insufficient memory to support Resource Save featurep.17036 Printer service requiredp.17037 Insufficient memory to collate jobp.17137 Insufficient memory for Flash Memory Defragment operationp.17137 Insufficient memory, some Held Jobs were deletedp.17137 Insufficient memory, some held jobs will not be restoredp.17138 Memory fullp.17139 Complex page, some data may not have printedp.17140 [color] invalid refill, change cartridgep.17151 Defective flash detectedp.17252 Not enough free space in flash memory for resourcesp.17253 Unformatted flash detectedp.17254 Serial option [x] errorp.17254 Standard network software errorp.17254 Network [x] software errorp.17255 Unsupported option in slot [x]p.17356 Parallel port [x] disabledp.17356 Serial port [x] disabledp.17356 Standard USB port disabledp.17356 Standard parallel port disabledp.17356 USB port [x] disabledp.17357 Configuration change, some held jobs were not restoredp.17458 Input config errorp.17458 Too many bins attachedp.17458 Too many disks installedp.17458 Too many flash options installedp.17458 Too many trays attachedp.17559 Incompatible output bin [x]p.17561 Remove defective diskp.17562 Disk fullp.17580.xx Fuser near life warningp.17580.xx Fuser life warningp.17580.xx Replace fuserp.17680.xx Fuser missingp.17682.xx Waste toner bottle nearly fullp.17682.xx Replace waste toner bottlep.17682.xx Waste toner bottle missingp.17683.xx Transfer module life warningp.17683.xx Transfer module missingp.17683.xx Replace transfer modulep.17688.xx [color] cartridge nearly lowp.17688.xx [color] cartridge lowp.17788.xx [Color] cartridge very lowp.17788.xx [Color] cartridge critically lowp.1771565 Emulation error, load emulation optionp.177Solving printing problemsp.177Multiple-language PDF files do not printp.177Printer control panel display is blank or displays only diamondsp.178Error message about reading USB drive appearsp.178Print jobs do not printp.178Make sure there is no problem with your printerp.178Make sure the printer is ready to printp.178Check if a supply is missing or needs replacementp.178Check if the standard exit bin is fullp.178Check if the paper tray is emptyp.178Make sure the correct printer software is installedp.178Make sure the internal print server is working properlyp.178Make sure you are using a recommended USB, serial, or Ethernet cablep.179Make sure printer cables are securely connectedp.179Confidential and other held jobs do not printp.179Partial job, no job, or blank page printsp.179Make sure the printer has sufficient memoryp.179Print job takes longer than expectedp.179Reduce the complexity of the print jobp.179Turn off the Page Protect settingp.179Change the environmental settingsp.179Job prints from the wrong tray or on the wrong paperp.180Check the paper type and paper size settingsp.180Incorrect characters printp.180Tray linking does not workp.180Load the same size and type of paperp.180Use the same Paper Size and Paper Type settingsp.180Large jobs do not collatep.180Make sure Collate is set to Onp.180Reduce the complexity of the print jobp.180Make sure the printer has enough memoryp.181Unexpected page breaksp.181Increase the Print Timeout valuep.181Solving home screen application problemsp.181An application error has occurredp.181Check the system log for relevant detailsp.181Contact customer supportp.181Solving option problemsp.181Option does not operate correctly or quits after it is installedp.181Reset the printerp.181Check to see if the option is connected to the printerp.182Make sure the option is installedp.182Make sure the option is available in the printer driverp.182Make sure the option is selectedp.182Paper tray problemsp.182Make sure the paper is loaded correctlyp.182Reset the printerp.182Make sure the paper tray is installed correctlyp.1822,000-sheet drawer problemsp.182Check the drawer connectionp.182Load paperp.183Clear any jamsp.183Avoid paper jamsp.183Cannot detect flash memory cardp.183Cannot detect printer hard diskp.183Internal Solutions Port does not operate correctlyp.183Check the Internal Solutions Port (ISP) connectionsp.183Check the cablep.183Make sure the network software is configured correctlyp.183Internal print server does not operate correctlyp.184Check the print server connectionsp.184Make sure the network software is configured correctlyp.184Memory cardp.184USB/parallel interface card does not operate correctlyp.184Check the USB/parallel interface card connectionp.184Check the cablep.184Solving paper feed problemsp.184Paper frequently jamsp.184Check the paperp.184Make sure there is not too much paper in the paper trayp.184Check the paper guidesp.185The paper may have absorbed moisture due to high humidityp.185Paper jam message remains after jam is clearedp.185Check the paper pathp.185Jammed pages are not reprintedp.185Turn on Jam Recoveryp.185Solving print quality problemsp.185Printer is printing blank pagesp.185Make sure there is no packing material left on the toner or print cartridgep.185Make sure the toner or print cartridge is not low on tonerp.186Characters have jagged or uneven edgesp.186Clipped imagesp.186Check the guidesp.186Check the paper size settingp.186Fine horizontal lines appear on color pagesp.187Shadow images appear on printsp.187Check the paper type and weight settingsp.187Make sure the print cartridge is not low on tonerp.187Gray background on printsp.188Make sure there is no worn or defective print cartridgep.188Incorrect marginsp.188Check the paper guidesp.188Check the paper size settingp.188Light colored line, white line, or incorrectly colored line appears on printsp.189Make sure there is no defective print cartridgep.189Make sure the transfer belt is not defectivep.189Paper curlp.189Check the paper type and weight settingsp.189Load paper from a fresh packagep.189Print irregularitiesp.189Load paper from a fresh packagep.190Check the paper type and weight settingsp.190Avoid textured paper with rough finishesp.190Make sure there is no defective print cartridgep.190Make sure the transfer belt is not defectivep.190Make sure the fuser is not defectivep.190Print is too darkp.190Load paper from a fresh packagep.190Avoid textured paper with rough finishesp.190Check the Paper Type settingp.191Make sure there is no defective print cartridgep.191Print is too lightp.191Load paper from a fresh packagep.191Avoid textured paper with rough finishesp.191Check the Paper Type settingp.191Make sure the print cartridge is not low on tonerp.191Make sure there is no defective print cartridgep.192Repeating defects appear on printsp.192Replace the print cartridgep.192Replace the fuserp.192Skewed printp.192Check the paper guidesp.192Check the paperp.193Solid color or black pages appear on printsp.193Make sure the print cartridges are installed correctly, are not defective and not low on tonerp.193Black or white streaks appear on transparencies or paperp.193Ensure that the fill pattern is correctp.193Check the paper typep.193Make sure the print cartridge is not low on tonerp.194Streaked horizontal lines appear on printsp.194Select another tray or feederp.194Make sure there is no worn, defective, or empty print cartridgep.194Toner fog or background shading appears on a pagep.194Make sure print cartridges are installed correctly and are not defectivep.194Make sure the transfer belt is not worn or defectivep.194Make sure the fuser is not worn or defectivep.195Make sure there is no toner in the paper pathp.195Recalibrate the printerp.195Check the software program or applicationp.195Toner rubs offp.195Check the paper type and weight settingsp.195Check the paper texture settingp.195Make sure the fuser is not worn or defectivep.195Transparency print quality is poorp.196Check the transparenciesp.196Check the paper type settingp.196Uneven print densityp.196Make sure there is no defective or worn print cartridgep.196Solving color quality problemsp.196FAQ about color printingp.196Embedded Web Server does not openp.199Check the network connectionp.199Check the address entered in the Web browserp.199Temporarily disable Web proxy serversp.199Contacting customer supportp.199Noticesp.201Product informationp.201Edition noticep.201GOVERNMENT END USERSp.201Trademarksp.202Federal Communications Commission (FCC) compliance information statementp.203Modular component noticep.203Licensing noticesp.203Noise emission levelsp.203Waste from Electrical and Electronic Equipment (WEEE) directivep.204India E-Waste noticep.204Battery noticep.204Static sensitivity noticep.204ENERGY STARp.205Temperature informationp.205Laser noticep.205Laser advisory labelp.205Power consumptionp.206Product power consumptionp.206Sleep Modep.206Hibernate Modep.206Off modep.207Total energy usagep.207Japanese VCCI noticep.207European Community (EC) directives conformityp.207Radio interference noticep.208Regulatory notices for wireless productsp.208Exposure to radio frequency radiationp.208Industry Canada (Canada)p.208Notice to users in the European Unionp.209STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.211Patent acknowledgmentp.213Indexp.215
Page 221 of the Lexmark C 790 user manual — Table of contents
Page 221 · click to enlarge
Page 221

Table of contents

Contentsp.2Safety informationp.6Learning about the printerp.8Finding information about the printerp.8Selecting a location for the printerp.9Printer configurationsp.10Understanding the printer control panelp.11Understanding the home screenp.13Understanding the home screenp.13Using the touch-screen buttonsp.14Setting up and using the home screen applicationsp.17Finding the IP address of the printerp.17Finding the IP address of the computerp.17Accessing the Embedded Web Serverp.17Activating the home screen applicationsp.18Exporting and importing a configurationp.20Additional printer setupp.21Installing internal optionsp.21Available internal optionsp.21Using the security lock featurep.22Accessing the system boardp.22Installing a memory cardp.26Installing a flash memory or firmware cardp.28Installing an Internal Solutions Portp.29Installing a printer hard diskp.33Removing a printer hard diskp.37Order of installationp.39Installing optional traysp.39Supported finishing featuresp.40Attaching cablesp.42Verifying printer setupp.43Printing a menu settings pagep.43Printing a network setup pagep.44Setting up the printer softwarep.44Installing the printerp.44Adding available options in the print driverp.44Setting up wireless printingp.45Preparing to set up the printer on a wireless networkp.45Installing the printer on a wireless network (Windows)p.46Installing the printer on a wireless network (Macintosh)p.47Changing port settings after installing a new network ISPp.50Setting up serial printing (Windows only)p.51Minimizing your printer's environmental impactp.52Saving paper and tonerp.52Using recycled paperp.52Conserving suppliesp.52Saving energyp.53Using Hibernate modep.53Using Eco-Modep.53Reducing printer noisep.54Adjusting Sleep modep.54Adjusting the brightness of the printer displayp.54Recyclingp.55Recycling Lexmark productsp.55Recycling Lexmark packagingp.55Returning Lexmark cartridges for reuse or recyclingp.55Loading paper and specialty mediap.57Setting the paper size and typep.57Configuring Universal paper settingsp.57Loading the standard or optional 550-sheet trayp.57Loading the 2000-sheet high-capacity feederp.60Loading the multipurpose feederp.63Linking and unlinking traysp.65Linking and unlinking traysp.65Linking exit binsp.66Creating a custom name for a paper typep.66Assigning a custom paper typep.66Paper and specialty media guidep.68Paper guidelinesp.68Paper characteristicsp.68Unacceptable paperp.69Selecting paperp.69Selecting preprinted forms and letterheadp.69Using recycled paper and other office papersp.70Storing paperp.70Supported paper sizes, types, and weightsp.71Supported paper sizesp.71Supported paper types and weightsp.72Printingp.74Printing a documentp.74Printing a documentp.74Printing in black and whitep.74Adjusting toner darknessp.74Printing from a flash drive or mobile devicep.75Printing from a flash drivep.75Supported flash drives and file typesp.76Printing from a mobile devicep.76Printing specialty documentsp.76Tips on using letterheadp.76Tips on using transparenciesp.77Tips on using envelopesp.77Tips on using labelsp.78Tips on using card stockp.78Printing confidential and other held jobsp.79Storing print jobs in the printerp.79Printing confidential and other held jobsp.79Printing information pagesp.80Printing a font sample listp.80Printing a directory listp.80Canceling a print jobp.81Canceling a print job from the printer control panelp.81Canceling a print job from the computerp.81Understanding the printer menusp.82Menus listp.82Supplies menup.83Paper menup.84Default Source menup.84Paper Size/Type menup.85Configure MP menup.88Substitute Size menup.88Paper Texture menup.88Paper Weight menup.90Paper Loading menup.92Custom Types menup.93Custom Names menup.94Custom Bin Names menup.94Universal Setup menup.94Bin Setup menup.95Reports menup.96Reports menup.96Network/Ports menup.97Active NIC menup.97Standard Network or Network [x] menusp.97Network Reports menup.99Network Card menup.99TCP/IP menup.99IPv6 menup.100Wireless menup.101AppleTalk menup.102Standard USB menup.102Parallel [x] menup.104Serial [x] menup.106SMTP Setup menup.108Security menup.110Miscellaneous Security Settings menup.110Confidential Print menup.110Erase Temporary Data Files menup.111Security Audit Log menup.112Set Date and Time menup.112Settings menup.113General Settings menup.113Flash Drive menup.119Setup menup.121Job Accounting menup.121Finishing menup.123Quality menup.125Utilities menup.128XPS menup.128PDF menup.128PostScript menup.129PCL Emul menup.129HTML menup.132Image menup.133Help menup.133Securing the memory before moving the printerp.135Statement of Volatilityp.135Erasing volatile memoryp.135Erasing non-volatile memoryp.135Erasing printer hard disk memoryp.136Configuring printer hard disk encryptionp.136Maintaining the printerp.138Cleaning the exterior of the printerp.138Cleaning the printhead lensesp.138Storing suppliesp.139Checking the status of suppliesp.140Checking the status of supplies from the printer control panelp.140Checking the status of supplies from a network computerp.140Ordering suppliesp.140Ordering a print cartridgep.140Ordering a fuser or a transfer modulep.141Ordering a waste toner bottlep.141Ordering staple cartridgesp.141Ordering a cleaning kitp.142Replacing suppliesp.142Replacing a print cartridgep.142Replacing the waste toner bottlep.145Moving the printerp.146Before moving the printerp.146Moving the printer to another locationp.147Shipping the printerp.147Administrative supportp.148Finding advanced networking and administrator informationp.148Using the Embedded Web Serverp.148Checking the virtual displayp.148Checking the status of the printerp.148Setting up e-mail alertsp.149Viewing reportsp.149Restoring factory default settingsp.149Clearing jamsp.151Avoiding jamsp.151Understanding jam numbers and locationsp.151200 paper jamp.153201 paper jamp.153202–203 paper jamsp.154230 paper jamp.155231–239 paper jamsp.15624x paper jamp.156250 paper jamp.157400–403 and 460–461 paper jamsp.158431–454, and 456–458 paper jamsp.159455 staple jamp.159Troubleshootingp.162Checking an unresponsive printerp.162Understanding the printer messagesp.162Adjusting colorp.162An error has occurred with the USB drive. Please remove and reinsert drive.p.162Change [paper source] to [custom type name]p.162Change [paper source] to [custom type name] load [orientation]p.162Change [paper source] to [custom string]p.163Change [paper source] to [custom string] load [orientation]p.163Change [paper source] to [paper size] [paper type]p.163Change [paper source] to [paper size] [paper type] load [orientation]p.163Close paper transport coverp.163Close left side doorp.163Close [tray] doorp.164Close finisher side doorp.164Close finisher top coverp.164Close front doorp.164Disk corruptedp.164Disk near full. Securely clearing disk space.p.164Disk problemp.164Empty the hole punch boxp.164Error reading USB drive. Remove USB.p.165Insert staple cartridgep.165Insert Tray [x]p.165Insert the hole punch boxp.165Install bin [x]p.165Install envelope feederp.165Install Tray [x]p.166Load [src] with [custom type name]p.166Load [src] with [custom string]p.166Load [src] with [size]p.166Load [src] with [type] [size]p.167Load Manual Feeder with [custom type name]p.167Load Manual Feeder with [custom string]p.167Load Manual Feeder with [paper type] [paper size]p.167Load staplesp.167Paper changes neededp.168Reattach bin [x]p.168Reattach bin [x] – [y]p.168Remove paper from standard output binp.169Remove paper from bin [x]p.169Remove paper from all binsp.169Remove paper from [linked set bin name]p.169Remove packaging material, [area name]p.169Restore held jobs?p.169Slide finisher to the leftp.169Some held jobs were not restoredp.169Supply needed to complete jobp.169Unsupported diskp.16931.xx Missing or defective [color] cartridgep.17032.xx [color] cartridge part number unsupported by devicep.17034 Incorrect paper size, open [src]p.17035 Insufficient memory to support Resource Save featurep.17036 Printer service requiredp.17037 Insufficient memory to collate jobp.17137 Insufficient memory for Flash Memory Defragment operationp.17137 Insufficient memory, some Held Jobs were deletedp.17137 Insufficient memory, some held jobs will not be restoredp.17138 Memory fullp.17139 Complex page, some data may not have printedp.17140 [color] invalid refill, change cartridgep.17151 Defective flash detectedp.17252 Not enough free space in flash memory for resourcesp.17253 Unformatted flash detectedp.17254 Serial option [x] errorp.17254 Standard network software errorp.17254 Network [x] software errorp.17255 Unsupported option in slot [x]p.17356 Parallel port [x] disabledp.17356 Serial port [x] disabledp.17356 Standard USB port disabledp.17356 Standard parallel port disabledp.17356 USB port [x] disabledp.17357 Configuration change, some held jobs were not restoredp.17458 Input config errorp.17458 Too many bins attachedp.17458 Too many disks installedp.17458 Too many flash options installedp.17458 Too many trays attachedp.17559 Incompatible output bin [x]p.17561 Remove defective diskp.17562 Disk fullp.17580.xx Fuser near life warningp.17580.xx Fuser life warningp.17580.xx Replace fuserp.17680.xx Fuser missingp.17682.xx Waste toner bottle nearly fullp.17682.xx Replace waste toner bottlep.17682.xx Waste toner bottle missingp.17683.xx Transfer module life warningp.17683.xx Transfer module missingp.17683.xx Replace transfer modulep.17688.xx [color] cartridge nearly lowp.17688.xx [color] cartridge lowp.17788.xx [Color] cartridge very lowp.17788.xx [Color] cartridge critically lowp.1771565 Emulation error, load emulation optionp.177Solving printing problemsp.177Multiple-language PDF files do not printp.177Printer control panel display is blank or displays only diamondsp.178Error message about reading USB drive appearsp.178Print jobs do not printp.178Make sure there is no problem with your printerp.178Make sure the printer is ready to printp.178Check if a supply is missing or needs replacementp.178Check if the standard exit bin is fullp.178Check if the paper tray is emptyp.178Make sure the correct printer software is installedp.178Make sure the internal print server is working properlyp.178Make sure you are using a recommended USB, serial, or Ethernet cablep.179Make sure printer cables are securely connectedp.179Confidential and other held jobs do not printp.179Partial job, no job, or blank page printsp.179Make sure the printer has sufficient memoryp.179Print job takes longer than expectedp.179Reduce the complexity of the print jobp.179Turn off the Page Protect settingp.179Change the environmental settingsp.179Job prints from the wrong tray or on the wrong paperp.180Check the paper type and paper size settingsp.180Incorrect characters printp.180Tray linking does not workp.180Load the same size and type of paperp.180Use the same Paper Size and Paper Type settingsp.180Large jobs do not collatep.180Make sure Collate is set to Onp.180Reduce the complexity of the print jobp.180Make sure the printer has enough memoryp.181Unexpected page breaksp.181Increase the Print Timeout valuep.181Solving home screen application problemsp.181An application error has occurredp.181Check the system log for relevant detailsp.181Contact customer supportp.181Solving option problemsp.181Option does not operate correctly or quits after it is installedp.181Reset the printerp.181Check to see if the option is connected to the printerp.182Make sure the option is installedp.182Make sure the option is available in the printer driverp.182Make sure the option is selectedp.182Paper tray problemsp.182Make sure the paper is loaded correctlyp.182Reset the printerp.182Make sure the paper tray is installed correctlyp.1822,000-sheet drawer problemsp.182Check the drawer connectionp.182Load paperp.183Clear any jamsp.183Avoid paper jamsp.183Cannot detect flash memory cardp.183Cannot detect printer hard diskp.183Internal Solutions Port does not operate correctlyp.183Check the Internal Solutions Port (ISP) connectionsp.183Check the cablep.183Make sure the network software is configured correctlyp.183Internal print server does not operate correctlyp.184Check the print server connectionsp.184Make sure the network software is configured correctlyp.184Memory cardp.184USB/parallel interface card does not operate correctlyp.184Check the USB/parallel interface card connectionp.184Check the cablep.184Solving paper feed problemsp.184Paper frequently jamsp.184Check the paperp.184Make sure there is not too much paper in the paper trayp.184Check the paper guidesp.185The paper may have absorbed moisture due to high humidityp.185Paper jam message remains after jam is clearedp.185Check the paper pathp.185Jammed pages are not reprintedp.185Turn on Jam Recoveryp.185Solving print quality problemsp.185Printer is printing blank pagesp.185Make sure there is no packing material left on the toner or print cartridgep.185Make sure the toner or print cartridge is not low on tonerp.186Characters have jagged or uneven edgesp.186Clipped imagesp.186Check the guidesp.186Check the paper size settingp.186Fine horizontal lines appear on color pagesp.187Shadow images appear on printsp.187Check the paper type and weight settingsp.187Make sure the print cartridge is not low on tonerp.187Gray background on printsp.188Make sure there is no worn or defective print cartridgep.188Incorrect marginsp.188Check the paper guidesp.188Check the paper size settingp.188Light colored line, white line, or incorrectly colored line appears on printsp.189Make sure there is no defective print cartridgep.189Make sure the transfer belt is not defectivep.189Paper curlp.189Check the paper type and weight settingsp.189Load paper from a fresh packagep.189Print irregularitiesp.189Load paper from a fresh packagep.190Check the paper type and weight settingsp.190Avoid textured paper with rough finishesp.190Make sure there is no defective print cartridgep.190Make sure the transfer belt is not defectivep.190Make sure the fuser is not defectivep.190Print is too darkp.190Load paper from a fresh packagep.190Avoid textured paper with rough finishesp.190Check the Paper Type settingp.191Make sure there is no defective print cartridgep.191Print is too lightp.191Load paper from a fresh packagep.191Avoid textured paper with rough finishesp.191Check the Paper Type settingp.191Make sure the print cartridge is not low on tonerp.191Make sure there is no defective print cartridgep.192Repeating defects appear on printsp.192Replace the print cartridgep.192Replace the fuserp.192Skewed printp.192Check the paper guidesp.192Check the paperp.193Solid color or black pages appear on printsp.193Make sure the print cartridges are installed correctly, are not defective and not low on tonerp.193Black or white streaks appear on transparencies or paperp.193Ensure that the fill pattern is correctp.193Check the paper typep.193Make sure the print cartridge is not low on tonerp.194Streaked horizontal lines appear on printsp.194Select another tray or feederp.194Make sure there is no worn, defective, or empty print cartridgep.194Toner fog or background shading appears on a pagep.194Make sure print cartridges are installed correctly and are not defectivep.194Make sure the transfer belt is not worn or defectivep.194Make sure the fuser is not worn or defectivep.195Make sure there is no toner in the paper pathp.195Recalibrate the printerp.195Check the software program or applicationp.195Toner rubs offp.195Check the paper type and weight settingsp.195Check the paper texture settingp.195Make sure the fuser is not worn or defectivep.195Transparency print quality is poorp.196Check the transparenciesp.196Check the paper type settingp.196Uneven print densityp.196Make sure there is no defective or worn print cartridgep.196Solving color quality problemsp.196FAQ about color printingp.196Embedded Web Server does not openp.199Check the network connectionp.199Check the address entered in the Web browserp.199Temporarily disable Web proxy serversp.199Contacting customer supportp.199Noticesp.201Product informationp.201Edition noticep.201GOVERNMENT END USERSp.201Trademarksp.202Federal Communications Commission (FCC) compliance information statementp.203Modular component noticep.203Licensing noticesp.203Noise emission levelsp.203Waste from Electrical and Electronic Equipment (WEEE) directivep.204India E-Waste noticep.204Battery noticep.204Static sensitivity noticep.204ENERGY STARp.205Temperature informationp.205Laser noticep.205Laser advisory labelp.205Power consumptionp.206Product power consumptionp.206Sleep Modep.206Hibernate Modep.206Off modep.207Total energy usagep.207Japanese VCCI noticep.207European Community (EC) directives conformityp.207Radio interference noticep.208Regulatory notices for wireless productsp.208Exposure to radio frequency radiationp.208Industry Canada (Canada)p.208Notice to users in the European Unionp.209STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.211Patent acknowledgmentp.213Indexp.215
Page 222 of the Lexmark C 790 user manual — Table of contents
Page 222 · click to enlarge
Page 222

Table of contents

Contentsp.2Safety informationp.6Learning about the printerp.8Finding information about the printerp.8Selecting a location for the printerp.9Printer configurationsp.10Understanding the printer control panelp.11Understanding the home screenp.13Understanding the home screenp.13Using the touch-screen buttonsp.14Setting up and using the home screen applicationsp.17Finding the IP address of the printerp.17Finding the IP address of the computerp.17Accessing the Embedded Web Serverp.17Activating the home screen applicationsp.18Exporting and importing a configurationp.20Additional printer setupp.21Installing internal optionsp.21Available internal optionsp.21Using the security lock featurep.22Accessing the system boardp.22Installing a memory cardp.26Installing a flash memory or firmware cardp.28Installing an Internal Solutions Portp.29Installing a printer hard diskp.33Removing a printer hard diskp.37Order of installationp.39Installing optional traysp.39Supported finishing featuresp.40Attaching cablesp.42Verifying printer setupp.43Printing a menu settings pagep.43Printing a network setup pagep.44Setting up the printer softwarep.44Installing the printerp.44Adding available options in the print driverp.44Setting up wireless printingp.45Preparing to set up the printer on a wireless networkp.45Installing the printer on a wireless network (Windows)p.46Installing the printer on a wireless network (Macintosh)p.47Changing port settings after installing a new network ISPp.50Setting up serial printing (Windows only)p.51Minimizing your printer's environmental impactp.52Saving paper and tonerp.52Using recycled paperp.52Conserving suppliesp.52Saving energyp.53Using Hibernate modep.53Using Eco-Modep.53Reducing printer noisep.54Adjusting Sleep modep.54Adjusting the brightness of the printer displayp.54Recyclingp.55Recycling Lexmark productsp.55Recycling Lexmark packagingp.55Returning Lexmark cartridges for reuse or recyclingp.55Loading paper and specialty mediap.57Setting the paper size and typep.57Configuring Universal paper settingsp.57Loading the standard or optional 550-sheet trayp.57Loading the 2000-sheet high-capacity feederp.60Loading the multipurpose feederp.63Linking and unlinking traysp.65Linking and unlinking traysp.65Linking exit binsp.66Creating a custom name for a paper typep.66Assigning a custom paper typep.66Paper and specialty media guidep.68Paper guidelinesp.68Paper characteristicsp.68Unacceptable paperp.69Selecting paperp.69Selecting preprinted forms and letterheadp.69Using recycled paper and other office papersp.70Storing paperp.70Supported paper sizes, types, and weightsp.71Supported paper sizesp.71Supported paper types and weightsp.72Printingp.74Printing a documentp.74Printing a documentp.74Printing in black and whitep.74Adjusting toner darknessp.74Printing from a flash drive or mobile devicep.75Printing from a flash drivep.75Supported flash drives and file typesp.76Printing from a mobile devicep.76Printing specialty documentsp.76Tips on using letterheadp.76Tips on using transparenciesp.77Tips on using envelopesp.77Tips on using labelsp.78Tips on using card stockp.78Printing confidential and other held jobsp.79Storing print jobs in the printerp.79Printing confidential and other held jobsp.79Printing information pagesp.80Printing a font sample listp.80Printing a directory listp.80Canceling a print jobp.81Canceling a print job from the printer control panelp.81Canceling a print job from the computerp.81Understanding the printer menusp.82Menus listp.82Supplies menup.83Paper menup.84Default Source menup.84Paper Size/Type menup.85Configure MP menup.88Substitute Size menup.88Paper Texture menup.88Paper Weight menup.90Paper Loading menup.92Custom Types menup.93Custom Names menup.94Custom Bin Names menup.94Universal Setup menup.94Bin Setup menup.95Reports menup.96Reports menup.96Network/Ports menup.97Active NIC menup.97Standard Network or Network [x] menusp.97Network Reports menup.99Network Card menup.99TCP/IP menup.99IPv6 menup.100Wireless menup.101AppleTalk menup.102Standard USB menup.102Parallel [x] menup.104Serial [x] menup.106SMTP Setup menup.108Security menup.110Miscellaneous Security Settings menup.110Confidential Print menup.110Erase Temporary Data Files menup.111Security Audit Log menup.112Set Date and Time menup.112Settings menup.113General Settings menup.113Flash Drive menup.119Setup menup.121Job Accounting menup.121Finishing menup.123Quality menup.125Utilities menup.128XPS menup.128PDF menup.128PostScript menup.129PCL Emul menup.129HTML menup.132Image menup.133Help menup.133Securing the memory before moving the printerp.135Statement of Volatilityp.135Erasing volatile memoryp.135Erasing non-volatile memoryp.135Erasing printer hard disk memoryp.136Configuring printer hard disk encryptionp.136Maintaining the printerp.138Cleaning the exterior of the printerp.138Cleaning the printhead lensesp.138Storing suppliesp.139Checking the status of suppliesp.140Checking the status of supplies from the printer control panelp.140Checking the status of supplies from a network computerp.140Ordering suppliesp.140Ordering a print cartridgep.140Ordering a fuser or a transfer modulep.141Ordering a waste toner bottlep.141Ordering staple cartridgesp.141Ordering a cleaning kitp.142Replacing suppliesp.142Replacing a print cartridgep.142Replacing the waste toner bottlep.145Moving the printerp.146Before moving the printerp.146Moving the printer to another locationp.147Shipping the printerp.147Administrative supportp.148Finding advanced networking and administrator informationp.148Using the Embedded Web Serverp.148Checking the virtual displayp.148Checking the status of the printerp.148Setting up e-mail alertsp.149Viewing reportsp.149Restoring factory default settingsp.149Clearing jamsp.151Avoiding jamsp.151Understanding jam numbers and locationsp.151200 paper jamp.153201 paper jamp.153202–203 paper jamsp.154230 paper jamp.155231–239 paper jamsp.15624x paper jamp.156250 paper jamp.157400–403 and 460–461 paper jamsp.158431–454, and 456–458 paper jamsp.159455 staple jamp.159Troubleshootingp.162Checking an unresponsive printerp.162Understanding the printer messagesp.162Adjusting colorp.162An error has occurred with the USB drive. Please remove and reinsert drive.p.162Change [paper source] to [custom type name]p.162Change [paper source] to [custom type name] load [orientation]p.162Change [paper source] to [custom string]p.163Change [paper source] to [custom string] load [orientation]p.163Change [paper source] to [paper size] [paper type]p.163Change [paper source] to [paper size] [paper type] load [orientation]p.163Close paper transport coverp.163Close left side doorp.163Close [tray] doorp.164Close finisher side doorp.164Close finisher top coverp.164Close front doorp.164Disk corruptedp.164Disk near full. Securely clearing disk space.p.164Disk problemp.164Empty the hole punch boxp.164Error reading USB drive. Remove USB.p.165Insert staple cartridgep.165Insert Tray [x]p.165Insert the hole punch boxp.165Install bin [x]p.165Install envelope feederp.165Install Tray [x]p.166Load [src] with [custom type name]p.166Load [src] with [custom string]p.166Load [src] with [size]p.166Load [src] with [type] [size]p.167Load Manual Feeder with [custom type name]p.167Load Manual Feeder with [custom string]p.167Load Manual Feeder with [paper type] [paper size]p.167Load staplesp.167Paper changes neededp.168Reattach bin [x]p.168Reattach bin [x] – [y]p.168Remove paper from standard output binp.169Remove paper from bin [x]p.169Remove paper from all binsp.169Remove paper from [linked set bin name]p.169Remove packaging material, [area name]p.169Restore held jobs?p.169Slide finisher to the leftp.169Some held jobs were not restoredp.169Supply needed to complete jobp.169Unsupported diskp.16931.xx Missing or defective [color] cartridgep.17032.xx [color] cartridge part number unsupported by devicep.17034 Incorrect paper size, open [src]p.17035 Insufficient memory to support Resource Save featurep.17036 Printer service requiredp.17037 Insufficient memory to collate jobp.17137 Insufficient memory for Flash Memory Defragment operationp.17137 Insufficient memory, some Held Jobs were deletedp.17137 Insufficient memory, some held jobs will not be restoredp.17138 Memory fullp.17139 Complex page, some data may not have printedp.17140 [color] invalid refill, change cartridgep.17151 Defective flash detectedp.17252 Not enough free space in flash memory for resourcesp.17253 Unformatted flash detectedp.17254 Serial option [x] errorp.17254 Standard network software errorp.17254 Network [x] software errorp.17255 Unsupported option in slot [x]p.17356 Parallel port [x] disabledp.17356 Serial port [x] disabledp.17356 Standard USB port disabledp.17356 Standard parallel port disabledp.17356 USB port [x] disabledp.17357 Configuration change, some held jobs were not restoredp.17458 Input config errorp.17458 Too many bins attachedp.17458 Too many disks installedp.17458 Too many flash options installedp.17458 Too many trays attachedp.17559 Incompatible output bin [x]p.17561 Remove defective diskp.17562 Disk fullp.17580.xx Fuser near life warningp.17580.xx Fuser life warningp.17580.xx Replace fuserp.17680.xx Fuser missingp.17682.xx Waste toner bottle nearly fullp.17682.xx Replace waste toner bottlep.17682.xx Waste toner bottle missingp.17683.xx Transfer module life warningp.17683.xx Transfer module missingp.17683.xx Replace transfer modulep.17688.xx [color] cartridge nearly lowp.17688.xx [color] cartridge lowp.17788.xx [Color] cartridge very lowp.17788.xx [Color] cartridge critically lowp.1771565 Emulation error, load emulation optionp.177Solving printing problemsp.177Multiple-language PDF files do not printp.177Printer control panel display is blank or displays only diamondsp.178Error message about reading USB drive appearsp.178Print jobs do not printp.178Make sure there is no problem with your printerp.178Make sure the printer is ready to printp.178Check if a supply is missing or needs replacementp.178Check if the standard exit bin is fullp.178Check if the paper tray is emptyp.178Make sure the correct printer software is installedp.178Make sure the internal print server is working properlyp.178Make sure you are using a recommended USB, serial, or Ethernet cablep.179Make sure printer cables are securely connectedp.179Confidential and other held jobs do not printp.179Partial job, no job, or blank page printsp.179Make sure the printer has sufficient memoryp.179Print job takes longer than expectedp.179Reduce the complexity of the print jobp.179Turn off the Page Protect settingp.179Change the environmental settingsp.179Job prints from the wrong tray or on the wrong paperp.180Check the paper type and paper size settingsp.180Incorrect characters printp.180Tray linking does not workp.180Load the same size and type of paperp.180Use the same Paper Size and Paper Type settingsp.180Large jobs do not collatep.180Make sure Collate is set to Onp.180Reduce the complexity of the print jobp.180Make sure the printer has enough memoryp.181Unexpected page breaksp.181Increase the Print Timeout valuep.181Solving home screen application problemsp.181An application error has occurredp.181Check the system log for relevant detailsp.181Contact customer supportp.181Solving option problemsp.181Option does not operate correctly or quits after it is installedp.181Reset the printerp.181Check to see if the option is connected to the printerp.182Make sure the option is installedp.182Make sure the option is available in the printer driverp.182Make sure the option is selectedp.182Paper tray problemsp.182Make sure the paper is loaded correctlyp.182Reset the printerp.182Make sure the paper tray is installed correctlyp.1822,000-sheet drawer problemsp.182Check the drawer connectionp.182Load paperp.183Clear any jamsp.183Avoid paper jamsp.183Cannot detect flash memory cardp.183Cannot detect printer hard diskp.183Internal Solutions Port does not operate correctlyp.183Check the Internal Solutions Port (ISP) connectionsp.183Check the cablep.183Make sure the network software is configured correctlyp.183Internal print server does not operate correctlyp.184Check the print server connectionsp.184Make sure the network software is configured correctlyp.184Memory cardp.184USB/parallel interface card does not operate correctlyp.184Check the USB/parallel interface card connectionp.184Check the cablep.184Solving paper feed problemsp.184Paper frequently jamsp.184Check the paperp.184Make sure there is not too much paper in the paper trayp.184Check the paper guidesp.185The paper may have absorbed moisture due to high humidityp.185Paper jam message remains after jam is clearedp.185Check the paper pathp.185Jammed pages are not reprintedp.185Turn on Jam Recoveryp.185Solving print quality problemsp.185Printer is printing blank pagesp.185Make sure there is no packing material left on the toner or print cartridgep.185Make sure the toner or print cartridge is not low on tonerp.186Characters have jagged or uneven edgesp.186Clipped imagesp.186Check the guidesp.186Check the paper size settingp.186Fine horizontal lines appear on color pagesp.187Shadow images appear on printsp.187Check the paper type and weight settingsp.187Make sure the print cartridge is not low on tonerp.187Gray background on printsp.188Make sure there is no worn or defective print cartridgep.188Incorrect marginsp.188Check the paper guidesp.188Check the paper size settingp.188Light colored line, white line, or incorrectly colored line appears on printsp.189Make sure there is no defective print cartridgep.189Make sure the transfer belt is not defectivep.189Paper curlp.189Check the paper type and weight settingsp.189Load paper from a fresh packagep.189Print irregularitiesp.189Load paper from a fresh packagep.190Check the paper type and weight settingsp.190Avoid textured paper with rough finishesp.190Make sure there is no defective print cartridgep.190Make sure the transfer belt is not defectivep.190Make sure the fuser is not defectivep.190Print is too darkp.190Load paper from a fresh packagep.190Avoid textured paper with rough finishesp.190Check the Paper Type settingp.191Make sure there is no defective print cartridgep.191Print is too lightp.191Load paper from a fresh packagep.191Avoid textured paper with rough finishesp.191Check the Paper Type settingp.191Make sure the print cartridge is not low on tonerp.191Make sure there is no defective print cartridgep.192Repeating defects appear on printsp.192Replace the print cartridgep.192Replace the fuserp.192Skewed printp.192Check the paper guidesp.192Check the paperp.193Solid color or black pages appear on printsp.193Make sure the print cartridges are installed correctly, are not defective and not low on tonerp.193Black or white streaks appear on transparencies or paperp.193Ensure that the fill pattern is correctp.193Check the paper typep.193Make sure the print cartridge is not low on tonerp.194Streaked horizontal lines appear on printsp.194Select another tray or feederp.194Make sure there is no worn, defective, or empty print cartridgep.194Toner fog or background shading appears on a pagep.194Make sure print cartridges are installed correctly and are not defectivep.194Make sure the transfer belt is not worn or defectivep.194Make sure the fuser is not worn or defectivep.195Make sure there is no toner in the paper pathp.195Recalibrate the printerp.195Check the software program or applicationp.195Toner rubs offp.195Check the paper type and weight settingsp.195Check the paper texture settingp.195Make sure the fuser is not worn or defectivep.195Transparency print quality is poorp.196Check the transparenciesp.196Check the paper type settingp.196Uneven print densityp.196Make sure there is no defective or worn print cartridgep.196Solving color quality problemsp.196FAQ about color printingp.196Embedded Web Server does not openp.199Check the network connectionp.199Check the address entered in the Web browserp.199Temporarily disable Web proxy serversp.199Contacting customer supportp.199Noticesp.201Product informationp.201Edition noticep.201GOVERNMENT END USERSp.201Trademarksp.202Federal Communications Commission (FCC) compliance information statementp.203Modular component noticep.203Licensing noticesp.203Noise emission levelsp.203Waste from Electrical and Electronic Equipment (WEEE) directivep.204India E-Waste noticep.204Battery noticep.204Static sensitivity noticep.204ENERGY STARp.205Temperature informationp.205Laser noticep.205Laser advisory labelp.205Power consumptionp.206Product power consumptionp.206Sleep Modep.206Hibernate Modep.206Off modep.207Total energy usagep.207Japanese VCCI noticep.207European Community (EC) directives conformityp.207Radio interference noticep.208Regulatory notices for wireless productsp.208Exposure to radio frequency radiationp.208Industry Canada (Canada)p.208Notice to users in the European Unionp.209STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.211Patent acknowledgmentp.213Indexp.215
Sources

References & links

Pages referenced in this manual — manufacturer, support and downloads.

Ask about the Lexmark C 790

Owners and our team usually reply within a day — and your question helps the next person too.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
No questions yet about the Lexmark C 790

Be the first to ask — other owners or our team will answer.

Original document

Lexmark C 790 manual PDF

222 pages·6 MB·Printer·PDF
Click any page above to open it here
Page 1 / …
100%
Loading pages…