
Read the operating instructions and the enclosed brochure „Guarantee and additional notices“ completely. Follow the instructions they contain. Safely keep these documents for future reference. !
Function / Application The BoreScope-Camera is a micro camera which can be connected to the VideoControl-Master base unit. The very small, immobile camera head allows the BoreScope-Camera to be used for inspections in minuscule openings. The stainless steel guide, 30 cm long, allows for a high level of operational safety and durability.. Working with a base unit, colour video images are sent to the LCD for inspecting all places that are difÖ cult to access such as cavities, air shafts, in masonry or motor vehicles.
Camera head with 4 high-power LEDs




Connection for optional accessories
Stainless steel guide, 30 cm
Connection to the base unit VideoControl-Master
When screwing the control cable to the BoreScope- Camera and the VideoControl-Master base unit on top, ensure that the arrow on the connector plug points toward the groove of the respective device.
The sensitive contact pins of the connector only fit into the socket in this position and can be damaged if not positioned correctly or used too forcefully. !
Control cable · Handle piece

The BoreScope-Camera delivers sharp images in a range between 1,5 and 5 cm from the camera head.
Objects well beyond the focus range may appear blurred.
> 5 cm

Guarantee, product care and disposal This device complies with all necessary standards for the free movement of goods within the EU. This product is an electric device and must be collected separately for disposal according to the European Directive on waste electrical and electronic equipment.
Further safety and supplementary notices at: www.laserliner.com/info
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.