Instruction/ maintenance manual of the product VF803J BodyCraft
Go to page of 11
SPX INDOOR TRAINING CYCLE ASSEMBLY MANUAL MODEL: VF803J Questions? As a quality home gym supplier wt' are committed to your complete satisfaction. 1[ you have questions, or find missing or damaged parts, we will g&UlffIIIUe your CQmplete satisfaction through our authorized detJJer service centers or our home offia customo .
BEFORE YOU BEGIN Congratulations and thank you for selecting the BODYCRAFT SPX INDOOR TRAINING CYCLE. The SPX INDOOR TRAINING CYCLE offers an impressive array of cardio training exercises to develop lower body muscle group of the body and tone up your cardio fitness.
EXPLODEDl 23 18 6 15 111 62R </.'73 , 73 7R 71 72.
EXPLODED 2 14 ,~~ 9.
NO. DESCRIPTION • OTY. 1 Main Frame 1 2 Rear Stabilizer 1 3 M8 X 4" Domed Bolt 4 4 M8 Washer 4 5 M8 Domed Nut 4 6 . Front Stabilizer 1 71.1 R) Pedal 1 8 M8Nut 1 9 Bottle Caoe 2 10 " Bottle.
NO. DESCRIPTION OTY. 41 Brake Pad 1 42 M6 X 3/4" Screw 1 43 M6 Washer 1 44 M6 Nut 1 45 Brake Arm 1 46 Brake Sleeve 1 47 4.5L SprinQ 1 48 "U" Sleeve 1 49 M6 X 1·1/4" Bolt 1 50 M6 X 4-3/4" Adj.
STEP 1 FRONT AND REAR STABILIZER 1. Attach Rear Stabilizer(2) and Front Stabilizer (6) to Main Frame (1) on a flat level surface floor, using two M8 X 4" Domed Bolts (3), two M8 Washers (4) and two M8 Domed Nuts (5) on each.
STEP 2 ASSEMBLE PEDALS 1. Carefully align the threads of the axle on the Right Pedal (7R) ("R" on end of axle ) with the threaded hole on the right crank arm and screw in clockwise by hand. Tighten the pedal to the crank arm using a 15mm wrench.
STEP 3 ASSEMBLE HANDLE BAR AND STEM 1. Insert the Stainless Steel Handlebar Stem (14) into the Front Tube of Bike (1), adjust the height according to your personal height above the SAFETY LINE, tighten by Lock Lever (18). Note: Pull the Lever of Lock Lever (18) backward and then release to adjust the angle of Lever you desired.
STEP 4 ASSEMBLE SEAT AND SEAT POST 1. Insert the Seat Post (15) intothe Rear Tube of Bike (1), adjust the height according to your perSonal height above the SAFETY LINE, tighten by Lock Lever (18). Note: Pull lever of Lock Lever (18) backward and then release to adjust the angle of Lever.
STEP 5 ASSEMBLE BOTTLE CAGE • 1. Attach a Bottle Cage (9) to each side of the front forks and secure using the Bottle Cage Fixed Screws (10).' RIGHT LEFT • · •.
An important point after buying a device BodyCraft VF803J (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought BodyCraft VF803J yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data BodyCraft VF803J - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, BodyCraft VF803J you will learn all the available features of the product, as well as information on its operation. The information that you get BodyCraft VF803J will certainly help you make a decision on the purchase.
If you already are a holder of BodyCraft VF803J, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime BodyCraft VF803J.
However, one of the most important roles played by the user manual is to help in solving problems with BodyCraft VF803J. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device BodyCraft VF803J along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
