Instruction/ maintenance manual of the product R50 BMW
Go to page of 5
Installation Instructions Page 1 of 5 November 2004 Audio, iPod Interface Ver 1.0 Accessory Development SUBJECT iPod ® Interface Kit – P/N 65 11 0 392 139 MODE L MINI Cooper (R50): Select Vehicle P.
2 Installation Manual P/N 01 29 0 393 657 Procedure: 1. Disconnect negative battery terminal. 2. Remove the following components using information available in TIS: • Drivers knee bolster (1) • Center dash face (3) (Refer to RA62 21 001) • Radio side pillars (4) (Refer to RA51 16 198) • Radio (5) (Refer to RA 65 11 030) • Glove box (6) 3.
3 Installation Manual P/N 01 29 0 393 657 8. Insert 4 rectangular pins from iPod harness (1) into radio harness (2) as follows: 9. Remove white 12-pin connector (3) from lower section of radio connector. Color Location Description White/gray 9 I-Bus Brown 12 Ground Violet/white 16 KL-R Red/green 15 KL-30 10.
4 Installation Manual P/N 01 29 0 393 657 14. Insert iPod cable (1) through hole in glovebox as indicated. Note: Split grommet as shown before placing around iPod cable in order to prevent damage to cable. 15. Split grommet (1) as indicated (2) and insert grommet through hole in glovebox wall.
5 Installation Manual P/N 01 29 0 393 657 21. Mount iPod interface as indicated below radio and secure with cable ties(not included). 22. Re-install all components removed for installation procedure. VEHICLE CODING There is no vehicle coding required for this installation.
An important point after buying a device BMW R50 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought BMW R50 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data BMW R50 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, BMW R50 you will learn all the available features of the product, as well as information on its operation. The information that you get BMW R50 will certainly help you make a decision on the purchase.
If you already are a holder of BMW R50, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime BMW R50.
However, one of the most important roles played by the user manual is to help in solving problems with BMW R50. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device BMW R50 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
