Instruction/ maintenance manual of the product IR8200L Actisys
Go to page of 4
ACTiSYS Corp. 48511 Warm Springs Blvd., Suite 216, Fremont, CA 94539 Tel:510 - 490 - 8024, Fax:510 - 623 - 7268, www.actisys.com, irda - info@actisys.com ACT - IR910SW IrDA Protocol Recording/Analysis Software (c)Copyright 2000 - 2002, ACTiSYS Corp. (10/22/2001, ver1.
The Primary, the Secondary, and IR910D should be placed very close to each other and all facing the same direction. Place a white paper in front of all three about 10 cm away. This way all three can see each other by r eflection. Make sure IR910D can hear both both device's talks.
c) In LOG_PHY.TXT, the word "Gaps!!!" indicates that gaps between consecutive bytes within this frame have been detected. These gaps are displayed with a special 3 - digit code underneath the hex representation of such a byte and the ASCII representation is not shown for this byte.
1) Keeping IR8200L power on. 2) Run COM_12.exe 3) Turn on the Device B and then active IR service program. 4) You can see “……**********” on the DOS screen. 5) Stop listening program, the program will generate a BIN file (LOG_RAW.BIN). 6) Rename LOG _RAW.
An important point after buying a device Actisys IR8200L (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Actisys IR8200L yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Actisys IR8200L - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Actisys IR8200L you will learn all the available features of the product, as well as information on its operation. The information that you get Actisys IR8200L will certainly help you make a decision on the purchase.
If you already are a holder of Actisys IR8200L, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Actisys IR8200L.
However, one of the most important roles played by the user manual is to help in solving problems with Actisys IR8200L. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Actisys IR8200L along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
