Instruction/ maintenance manual of the product HANNOVER CR 67 Blaupunkt
Go to page of 16
Hannover CR 67 Radio / Cassette Operating Instructions Congratulations on your purchase of this Blaupunkt Cassette Receiver. BA Hannov. CR67 SEA gb® 29.
2 Ta b le of Contents English Features ........................................................... 3 Traffic Safety and Precautions ......................... 3 Detachable Face ............................................... 4 Electrical Connections and Installation .
3 Features Congratulations on your purchase of this Blaupunkt Cassette Receiver. Its Codem III FM/AM Tuner and Autoreverse Cassette Tape Player mechanism provide the ultimate in sound reproduction.
4 Detachable Face Detaching & Attaching the Face: The face of this unit can be detached and taken with you to prevent it from being stolen. Detaching the Face: Press the REL (Release) Button and detach the face by gently pulling it off as illustrated.
5 Electrical Connections and Installation Please carefully read all of the instructions before you begin. Carefully follow all instructions. You’ll be glad you did! GENERAL RECOMMENDATIONS • If you’re not confident that you can install the unit correctly, have it installed by a qualified Blaupunkt installation technician.
6 SPEAKER CONNECTIONS • You can connect a speaker (regular, co-axial or tri-axial speakers or component speaker system, all hereafter referred to simply as “speaker”) to each of the units’ four pairs of speaker leads.
7 Installation Recommendations • Carefully choose the mounting location so that the unit won’t interfere with normal driving. • Avoid mounting locations where the unit would be subject to high temperatures, such as from direct sunlight or hot air from the heater, or where it would subject to dust, dirt or excessive vibration.
8 Slit Bracket Support max. size M5x8 max. size M5x8 Mounting the Unit in a Japanese Car You may have difficulty mounting this unit in some Japanese cars that have ISO mounting features.
9 Maintenance Removing the Unit Use the Release Keys as shown below. Keep them in a safe place in case you need them in the future. Fuse Replacement When replacing the fuse, be sure to use one with the correct amperage, which will be stated on the fuse case.
10 Specifications Audio Power Specifications Power Output and Total Harmonic Distortion: 10 watts per channel minimum continuous average output into 4 ohms, 4 channels driven, from 30-15 000 Hz with no more than 1% total harmonic distortion. Other Specifications Tuner FM Tuning Range: 87.
11 Location of Controls 1. REL (Release) Button 2. ON (Power) Button 3. Source (and Radio Band) Select 4. Cassette Eject 5. Mute/Audio Button/Clock Adjust:00 6. SCA (Scan) TS (Travel Store) 7. LD (Loudness)/ SENS (Tuning Sensitivity) 8. Cassette Insertion Slot 9.
12 Instructions — General Operation See Traffic Safety & Precautions on page 3. “Press” means a momentary press of less than 1/2 second. All presses requiring more than 1/2 second are followed by beep.
13 Audio Operation Volume Control Buttons (+/ – ) Press + and - to increase/decrease volume from 0 to 63, in increments of 1.25 dB/step. Volume control is accessible from all modes except Bass, Treble, Balance and Fade modes.
14 Radio Operation Last Station Memory Each FM bank and AM band has its own last station memory which holds last-tuned frequency for that band or bank irrespective of whether that frequency is stored into a preset. Selecting Bands Press SRC as needed to access FM1, FM2, FM3/FMT, AM/AMT banks.
15 Cassette T ape Pla y er Operation Tape Playback: • Insert cassette into Cassette Door. (Note: Make sure that the side of the cassette exposed is facing right and that all slack has been removed from the tape prior to insertion.) • If ignition switch is already in “on” or accessory position, insertion of cassette will turn unit on.
Jalan Pemimpin 38C - 38D Singapore 577180 Robert Bosch (Aust) Pty Ltd P.O. Box 66 Rosebank MDC Clayton Victoria 3169 Australia Tahiti Sound B.P. 3793 Papeetee Tahiti 98713 French Polynesia Jebsen & Co. Ltd (Consumer Products Division) 28F Caroline Centre 2-38 Yun Ping Road Causeway Bay Hong Kong Jalan Let.
An important point after buying a device Blaupunkt HANNOVER CR 67 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Blaupunkt HANNOVER CR 67 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Blaupunkt HANNOVER CR 67 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Blaupunkt HANNOVER CR 67 you will learn all the available features of the product, as well as information on its operation. The information that you get Blaupunkt HANNOVER CR 67 will certainly help you make a decision on the purchase.
If you already are a holder of Blaupunkt HANNOVER CR 67, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Blaupunkt HANNOVER CR 67.
However, one of the most important roles played by the user manual is to help in solving problems with Blaupunkt HANNOVER CR 67. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Blaupunkt HANNOVER CR 67 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
