Instruction/ maintenance manual of the product Dallas RMD 169 Blaupunkt
Go to page of 40
Radio / MD Dallas RMD 169 US Operating instructions.
2 14 2 1 3 17 16 15 21 18 19 20 6 8 13 2 3 5 9 11 12 7 1 4 10.
3 ENGLISH DEUTSCH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS Contents Condensed instructions ................ 4 Remote control RC 08 ................. 11 Important ...................................... 12 Read the following before using the unit .
4 2 ON Switching on the unit Insert the KeyCard and press ON brief- ly. The unit is switched on in the last op- erating mode selected and with the previously selected volume. Switching off the unit Press ON for approx. 1 second. The display can be adjusted for the de- sired viewing angle in order to improve legibility.
5 ENGLISH DEUTSCH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS 3 Adjusting the volume Turn the knob to adjust the volume. The selected value is shown on the display. When switched on, the unit plays at the preselected volume (ON VOL). ON VOL can be changed (refer to “Programming with DSC – ON VOL”).
6 for a frequency with better reception for the same station. AF on/off: Select menu level 2 using TU and hold AF down. EXIT Press the key briefly to terminate or abort the adjustment process. ENT (Enter) Press briefly to accept/save the adjust- ments.
7 ENGLISH DEUTSCH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS 6 Rocker Radio mode If the rocker is pressed on menu level 2, menu level 1 is automatically called up.
8 Further functions of the rocker: Further settings available with AUD 8 DSC-MODE 7 PTY The settings are available only if the corresponding function is activated. 7 DSC ( D irect S oftware C ontrol) You can adjust programmable default settings using DSC.
9 ENGLISH DEUTSCH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS 9 DIS Selecting various display modes. Radio mode Press DIS briefly: - Name of the selected station - Currently selected frequency - PTY code A condition is that an RDS station can be received with an adequate field strength.
10 The ignition is off and LED ON is se- lected in the DSC menu (factory de- fault setting). Further information: “Programming with DSC, LED ON/OFF”. @ KeyCard anti-theft protection sys- tem The KeyCard must be inserted before the unit can be operated.
11 ENGLISH DEUTSCH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS D Keys <</>>, / Radio mode Station seek Up Down <</>> Up/down in steps (on FM only when AF is deactivated) FM only: <</>> Page through the transmission chains, if AF is on, e.
12 Telephone mute If a mobile phone is connected, radio and MD/CD sound can be muted automatically when the phone is in use (telephone mute). “PHONE” then appears on the display. Accessories Only use accessories and spare parts ap- proved by Blaupunkt.
13 ENGLISH DEUTSCH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS • Slide the card as far as possible to the right, and remove from the front. • Engage the control panel. For safety reasons, the control panel must always be engaged whilst the vehicle is moving.
14 The unit is now also ready for operation with the new KeyCard. A maximum of two KeyCards can be taught in. If a third KeyCard is taught in, the card which is not employed for the teaching-in process of the new card automatically loses its va- lidity.
15 ENGLISH DEUTSCH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS Selecting the operating mode You can select from the Radio (TU), MiniDisc (MD) and CD changer (CDC) modes.
16 Radio operation with RDS ( R adio D ata S ystem) AF - alternative frequency The AF ( a lternative f requency) function en- sures that the best available frequency of the station being received is selected auto- matically. Switching AF on/off: During radio mode • Press TU : menu level 2 is called up.
17 ENGLISH DEUTSCH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS • Press NEXT briefly and repeatedly un- til the desired memory level appears on the display. Storing stations You can store six stations on the FM band on each memory level (I, II, T) using the sta- tion keys ST1 - ST6 .
18 Calling up stored stations You can call up stored stations at the touch of a button. FM Call up the stations directly on the selected memory level as follows: • Press the keys ST1 - ST6 . To call up stations on a different memory level: • Press NEXT until the desired memory level is displayed, then select a stored station with ST1 - ST6 .
19 ENGLISH DEUTSCH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS Changing the sampling time (Scan) The sampling time can be selected between 5 and 30 seconds. If you wish to change the duration of the sampling time, refer to “Programming with DSC – SCANTIME”.
20 After the beep, the program type of the sta- tion currently being received is displayed. If “NONE” is displayed, the station has no PTY code. Displaying the selected program type • Press << or >> . The last program type selected is displayed briefly.
21 ENGLISH DEUTSCH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS b) With the seek run rocker << >> If PTY is activated, you can select a program type with << >> . • Press << or >> : the last program type selected is displayed for three seconds.
22 Removing the MiniDisc • With the control panel disengaged, hold the Eject key (arrow) down for ap- prox. 1 second. The MiniDisc is ejected. Do not obstruct or assist automatic inser- tion or ejection of the MiniDisc, as the mech- anism may otherwise be damaged.
23 ENGLISH DEUTSCH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS CDC mode: “CD 10” – CD number “TRACK 13” – Track number “14:34” – Time “00:20” – Time played “VIVALDI” – CD name The name of the CD can be displayed only if a name has been entered.
24 If “TPM” is shown in reverse video on the display, TPM replay is activated. All tracks on the MiniDisc or CD which were stored in the operating mode with TPM are played. If SCA (Scan) is activated in addition to TPM, only the stored tracks are sampled.
25 ENGLISH DEUTSCH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS Selecting MIX functions • Press MIX briefly: the display signals briefly the activated state. SCAN For brief sampling of the MiniDisc or CD tracks. Starting SCAN: • Press SCA briefly: “SCAN” appears on the display.
26 Cloc k - Time The unit has an internal clock which is set automatically through RDS for absolute ac- curacy. A condition for correction by RDS is that an RDS transmitter with CT function (CT = clock time) is being received. Automatic correction of the time can be de- activated.
27 ENGLISH DEUTSCH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS Equalizer setting The sound in the vehicle is influenced deci- sively by the acoustic characteristics of the passenger compartment, substantially more than by the characteristics of the loudspeak- ers.
28 Selecting a quality factor for the bass or mid-range • Press / repeatedly until “LO-Q- FAC” or “HI-Q-FAC” appear in the dis- play. • Press << or >> once or several times in order to set the quality factor (Q- FACT 1 to Q-FACT 3).
29 ENGLISH DEUTSCH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS Equalizer setting Tips on adjusting the equalizer Begin adjustment with the mid-range/treble and complete it with the bass range.
30 Pr ogramming with DSC The car radio offers the facility to adjust cer- tain settings and functions to your require- ments and to store these changes with the aid of DSC ( D irect S oftware C ontrol). The default settings are selected at the fac- tory.
31 ENGLISH DEUTSCH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS CLK AUTO/MAN For activating/deactivating automatic hours correction. Refer also to “CLOCK time, hours correction”. 12/24H MODE Select the time display (12-hour or 24-hour).
32 UPDATE In CD changer mode, this function enables the names of CDs to be deleted in or- der to create space for new CDs. (Refer to “Deleting CD names with DSC-UP- DATE”.) TUNER Selecting the reception range for your country. The frequency range in kHz with- in the waveband is shown in brackets for each setting.
33 ENGLISH DEUTSCH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS PTY For selection of a desired program type in FM mode (e.g. sport, news).
34 SCAN For brief sampling of the radio stations which can be received, or of the tracks in MD and CD changer mode. The stored radio stations can be sampled with Preset Scan. Softkey ( Soft ware key ) Key with variable function. TPM – T rack P rogram M emory For storing and playing preferred tracks in MD and CD changer mode.
Blaupunkt-Werke GmbH Bosch Gruppe 08/99 Sc/MS K7/VKD 8 622 402 195.
Radio / MD Dallas RMD 169 US Installation instructions Instructions de montage Instrucciones de montaje Instruções de montagem.
138 GB Safety precautions Installation and connection regulations – In the event that this equipment is installed or repaired incorrectly, this could cause malfunctions in the vehicle electronics. – To avoid causing damage to your radio, use the corresponding Blaupunkt adapter cable to connect the 8-pin +/- ISO plug in the vehicle.
139 ENGLISH DEUTSCH FRANÇAIS ESPAÑOL PORTUGUÊS SVENSKA ESPAÑOL PORTUGUÊS Supplied Mounting Hardware - Materiel de montage fourni - Componenti di fissaggio comprese nella fornitura - Elementos de fixação fornecidos.
140 Antenna Fig. 4 1. 2. 3. 4. 5. 6. 8. A C D F E 8 601 910 002 2 2 1 1 7. 8 634 494 176 film 12V 12V 53 182 165 1-20 Installation and connection instructions • Notice de montage et de branchement .
141 ENGLISH DEUTSCH FRANÇAIS ESPAÑOL PORTUGUÊS SVENSKA ESPAÑOL PORTUGUÊS 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 C B A 14 7 10 13 16 19 3 6 9 12 15 18 2 58 11 14 17 20 C-1 C-2 C-3 RC 08 Fig.10 AB 1 — 1 Speaker out RR+ 2 T elef on Mute 2 Speaker out RR- 3 Sub Out 3 Speak er out RF+ 4 P ermanent +12V 4 Speak er out RF- 5 Aut.
An important point after buying a device Blaupunkt Dallas RMD 169 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Blaupunkt Dallas RMD 169 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Blaupunkt Dallas RMD 169 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Blaupunkt Dallas RMD 169 you will learn all the available features of the product, as well as information on its operation. The information that you get Blaupunkt Dallas RMD 169 will certainly help you make a decision on the purchase.
If you already are a holder of Blaupunkt Dallas RMD 169, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Blaupunkt Dallas RMD 169.
However, one of the most important roles played by the user manual is to help in solving problems with Blaupunkt Dallas RMD 169. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Blaupunkt Dallas RMD 169 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
