Instruction/ maintenance manual of the product CHARLOTTE CR148 Blaupunkt
Go to page of 17
ilh Eade~ III-US Taaer Rtfeeptear/l ecterrr Cassette arec S~a~aaisear Cadelra III-US ~ece~~a~/~e ~adac~a~ de Casse~ie son Sia~aaizada~ Cadet 11/- Tact-fifas ~ece~~ar cam Sia~aaizada~ Cadet ~~I-~ Bosch.
FCC Warning The equipment has been tested and found to comply with the limits for a Class B device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Table of Contents . English FCC Warning .................................................... .2 Owner’s Record.. .............................................. .2 Features ........................................................... 4 Precautions ...
1 ENGLISH 1 Features Congratulations on your purchase of this Blaupunkt Cassette Receiver. Its Codem III-US FM/AM Tuner and Autoreverse Cassette Tape Player mechanism provide the ultimate in sound reproduction. Its high-power amplifier and 4Channel preamp output provide you with tremendous system configuration flexibility.
Detachable Face . Detaching & Attaching the Face: The face of this unit can be detached and taken with you to prevent it from being stolen. Detaching the Face: Press the REL (Release) Button and detach the face by gently pulling it off as illustrated.
Electrical Connections and Installation @/c?#&*>@! To avoid the aggravation of costly mistakes and serious damage that could make you feel this way, please carefully read all of the instructions before you begin. Carefully follow all instructions.
l DON’T connect the left and right speaker leads to each other or to the same speakers. l DON’T connect the front and rear speaker leads to each other or to the same speakers. l DON’T connect the negative speaker leads to each other. l DON’T connect the positive speaker leads to each other.
Installation Recommendations l Carefully choose the mounting location so that the unit won’t interfere with normal driving. l Avoid mounting locations where the unit would be subject to high temperatures, such as from direct sunlight or hot air from the heater, or where it would subject to dust, dirt or excessive vibration.
Mounting the Unit in a Japanese Car . You may have difficulty mounting this unit in some Japanese cars that have IS0 mounting features. In this case, consult your Blaupunkt dealer. 1 Run a blade along the slits on the back of the front trim ring, unscrew the two side screws, and separate it from the unit.
Maintenance Removing the Unit Use the Release Keys as shown below. Keep them in a safe place in case you need them in the future. Fuse Replacement When replacing the fuse, be sure to use one with the correct amperage, which will be stated on the fuse case.
Specifications . Audio Power Specifications Power Output and Total Harmonic Distortion: 13.5 watts per channel minimum continuous average output into 4 ohms, 4 channels driven, from 30-15,000 Hz with no more than 1% total harmonic distortion.
Location of Controls :VERSk I ” r) h10 l-2 i3 I;1 15 16 l-7 l-8 1. REL (Release) Button 2. PWR (Power) Button 3. Source (and Radio Band) Select 4. Cassette Eject 5. Mute/ Audio Button/ Clock Adjust:00 6. SCA (Scan) TS (Travelstore) 7. LD (Loudness)/ SENS (Tuning Sensitivity) 8.
Ignition-Off Clock Recall /Turning Unit On . Vehicle ignition must be on. To turn unit on, press PWR Button (2) or insert a tape. Ignition-On /Turning Unit Off Press the PWR Button to turn the unit off. Release for Detachable Faceplate Push REL to detach face.
Bass, Treble, Balance and Fade Press Mute/AUDIO for more than l/2 second to access Bass. Subsequent presses access Treble, Balance and Fade modes. Bass -Adjust from +7 to -7 at 2 dB/step using + to increase bass, - to decrease. Treble - Adjust from +7 to -7 at 2 dB/step using + to increase treble,- to decrease.
Manual Tuning . Press A or V for more than l/2 second and frequency will go one channel/step in direction pressed. Press and hold causes continuous manual tuning. Unit returns to seek tuning mode after 4 seconds or after storing a station on a preset.
Auxiliary Input Jack Connect other audio equipment, such as a portable CD or DAT player, through the 1.2 voW3.5 mm pigtail connector. Access auxiliary equipment output by pressing SRC until “I+” appears. Adjust volume, bass, and treble settings through head unit.
@ BLAUPUNKE . Bosch Group German Headquarters: Blaupunkt-Werke GmbH Postfach 77 77 77 D-31 132 Hildesheim Germany Robert Bosch Corporation Sales Group - Blaupunkt Division 2800 South 25th Avenue, Broa.
An important point after buying a device Blaupunkt CHARLOTTE CR148 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Blaupunkt CHARLOTTE CR148 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Blaupunkt CHARLOTTE CR148 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Blaupunkt CHARLOTTE CR148 you will learn all the available features of the product, as well as information on its operation. The information that you get Blaupunkt CHARLOTTE CR148 will certainly help you make a decision on the purchase.
If you already are a holder of Blaupunkt CHARLOTTE CR148, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Blaupunkt CHARLOTTE CR148.
However, one of the most important roles played by the user manual is to help in solving problems with Blaupunkt CHARLOTTE CR148. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Blaupunkt CHARLOTTE CR148 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center