
Owner’s Manual

For Customer Use: Carefully read the Model No. and Serial No. located at the back of the unit and enter the information below. Retain this information for future reference. Model No Serial No

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. The important note and rating are located on the rear or bottom of the cabinet. The symbol for CLASS II (Double Insulation)
ɶ Laser Safety This apparatus is classified as a CLASS 1 LASER PRODUCT. This unit employs a laser. Only a qualified service personnel should remove the cover or attempt to service this unit, due to the possibility of eye injury. CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. CAUTION: CLASS 2 LASER RADIATION WHEN OPEN. DO NOT STARE INTO THE BEAM. LOCATION: INSIDE, NEAR THE DECK
2 Slots and openings in the cabinet at the sides and underneath are provided for ventilation. To ensure reliable operation and to protect the unit from overheating, these openings must not be blocked or covered. Avoid installation in enclosed spaces such as bookcases unless suitable ventilation is provided. 3 Keep the unit away from radiators and other heat sources. 4 Avoid use near strong magnetic fields. 5 Do not push objects of any kind into the unit through the cabinet slots or openings as they could touch electrically live parts or short circuit parts resulting in a fire or electric shock. 6 To prevent fire or shock hazard, do not expose this apparatus to dripping or splashing, no objects filled with liquids, such as vases, should be placed on the apparatus. 7 Do not stand the unit vertically. Use the unit in a horizontal (flat) position only. 8 This product is in Stand-by mode when turned off while the AC adapter is connected. To completely shut down the unit, you must unplug the AC adapter from the AC outlet. 9 Do not place any combustible objects on the device (candles, etc.). 10 Before moving the unit, be sure to remove any media and unplug the AC adapter from the AC outlet. 11 Disconnect the mains plug to shut off when find troubles or not in use. 12 The mains plug shall remain readily operable. 13 Read both manual instructions to ensure correct and safe installation and interconnection of the unit in multimedia systems. 14 Keep the distances 20 cm around apparatus of ventilation openings.
MECHANISM.
ɶ Power Supply The power supply is connected and the unit is live when the AC adapter is plugged into a 100 - 240 V~, 50 - 60 Hz AC outlet. To operate the unit, press [Q (standby/on)]. WARNING: LIVE PARTS INSIDE.
DO NOT REMOVE ANY SCREWS.
ɶ Caution 1 Do not attempt to open the cabinet. There are no parts inside you can service. Refer all servicing to qualified service personnel.

A NOTE ABOUT RECYCLING This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations. This product consists of materials which can be recycled and reused if disassembled by a specialised company.
Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing or climbing on it. A falling unit can cause serious injury or even death.
Following information is only for EU-member states: The use of the symbol indicates that this product may not be treated as household waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
installed) shall not be exposed to excessive heat such as sunshine, fire, or the like.
Following information is only valid EU- member States: Disposal of batteries and/or accumulators The crossed out wheeled dust bin symbol indicates that batteries and/ or accumulators must be collected and disposed of separately from household waste. If the battery or accumulator contains more than the specified values of lead (Pb), mercury (Hg), and/or cadmium (Cd) defined in the Battery Directive (2006/66/EC), then the chemical symbols for lead (Pb), mercury (Hg) and/or cadmium (Cd) will appear below the crossed out wheeled dust bin symbol. By participating in separate collection of batteries, you will help to assure the proper disposal of products and batteries and thus help to prevent potential negative consequences for the environment and human health. For more detailed information about the collection and recycling programmes available in your country, please contact your local city office or the shop where you purchased the product.
ɶ Moisture Condensation Warning • Moisture condensation may occur inside the unit when it is moved from a cold place to a warm place, after heating a cold room, or under conditions of high humidity. Do not use the unit for at least 2 hours to allow the inside to dry.
ɶ About Copyright • Unauthorised copying, broadcasting, public performance and lending of discs are prohibited.
This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.
Pb, Hg, Cd

ɶ Notice for the Progressive Scan Output • Consumers should note that not all high definition television sets are fully compatible with this product and may cause artifacts to be displayed in the picture. In case of picture problems with 480 or 576 progressive scan output, it is recommended that the user switch the connection to the ‘standard definition’ output. If there are questions regarding your TV set compatibility with this 480p or 576p product, please contact our customer service centre.
With a digital camera (including built-in cell phone cameras):
Point a digital camera towards the remote control. Push any button on the remote control and look through the digital camera. If the infrared light appears through the camera, the remote control is working.
ɶ Cleaning the Unit Use a soft cloth slightly moistened with a mild detergent solution. Do not use solutions containing alcohol, spirits, ammonia or abrasive.
ɶ Cleaning Discs If a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the centre out. Do not wipe in a circular motion. Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning agents or antistatic spray intended for analogue records.
ɶ Disc Handling Handle the discs so that fingerprints and dust do not adhere to the disc surfaces. Always store the disc in its protective case when it is not in use.
ɶ Servicing If the unit becomes inoperative, do not try to fix the problem by yourself. There are no user serviceable parts inside. Turn the unit off, unplug the AC adapter, and consult your dealer or an authorised service centre.
ɶ Cleaning the Disc Lens If the unit does not perform correctly even though you have referred to “TROUBLESHOOTING” and the relevant sections in the owner’s manual, the laser optical pickup unit may be dirty. Consult your dealer or an authorised service centre for inspection and cleaning of the laser optical pickup unit.
ɶ IR Signal Check If the remote control is not working properly, you can use a digital camera (including a cellular phone with built-in camera) to see if it is sending out an infrared signal.
C Caution

Windows Media and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,226,616; 6,487,535; 7,392,195; 7,272,567; 7,333,929; 7,212,872 & other U.S. and worldwide patents issued & pending. DTS-HD, the Symbol, & DTS-HD and the Symbol together are registered trademarks & DTS-HD Master Audio | Essential is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.
Java and all Java based trademarks and logos are trademarks or registered trademarks of Oracle and/or its affiliates.
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
Kodak and KODAK Picture CD Compatible are trademarks of Kodak used under license.
“AVCHD” and the “AVCHD” logo are trademarks of Panasonic Corporation and Sony Corporation.
“x.v.Colour” and “x.v.Colour” logo are trademarks of Sony Corporation.
DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.
DLNA®, the DLNA Logo and DLNA CERTIFIED® are trademarks, service marks, or certification marks of the Digital Living Network Alliance.

1.5 Symbols Used in this Owner’s Manual To specify which media type each function is applicable to, we put the following symbols at the beginning of each item to operate.
“Blu-ray Disc™”, “Blu-ray™” and “Blu-ray Disc™” logo are trademarks of the Blu-ray Disc Association.

Description refers to audio CD / DTS-CD Description refers to DVD-RW/- R and USB flash drive with AVCHD files Description refers to BD-RE/-R, DVD-RW/-R, CD-RW/-R and USB flash drive with DivX® files Description refers to BD-RE/-R, DVD-RW/-R, CD-RW/-R and USB flash drive with MP3 files Description refers to BD-RE/-R, DVD-RW/-R, CD-RW/-R and USB flash drive with Windows Media™ Audio files Description refers to BD-RE/-R, DVD-RW/-R, CD-RW/-R and USB flash drive with JPEG files Description refers to video files in the DLNA home server Description refers to music files in the DLNA home server Description refers to photo files in the DLNA home server
“Blu-ray 3D™” and “Blu-ray 3D™” logo are trademarks of the Blu-ray Disc Association.
is a trademark of DVD Format/Logo Licensing Corporation.
“BD-Live™” and “BD-Live™” logo are trademarks of the Blu-ray Disc Association.

“BONUSVIEW™” and “BONUSVIEW™” logo are trademarks of the Blu-ray Disc Association.

7.12 Switching Audio Soundtrack 34 7.13 Switching Camera Angles 35 7.14 Noise Reduction 35 7.15 Virtual Surround 35
11. LANGUAGE CODE LIST ................50
12. SPECIFICATIONS ...........................51
13. NETWORK SERVICE DISCLAIMER ....................................52
LICENSE end of book


* The unit can also be turned on by touching these buttons. 1 Infrared sensor window 2 LED light 3 Q (standby/on) button 4 B (play) button* 5 C (stop) button 6 A (eject) button*
1 HDMI OUT jack 2 LAN terminal 3 AV OUT jack 4 OPTICAL jack 5 DC IN 12V jack (Plug the AC adapter into the DC IN jack and then into an AC outlet.)

1 Disc loading slot 2 USB input
C Caution · C Caution

ɶ Installing the Batteries in the Remote Control

Install 2 R03 (1.5 V) batteries matching the polarity indicated inside battery compartment of the remote control.
C Caution Incorrect use of batteries can result in hazards such as leakage and bursting. Please observe the following:
* The unit can also be turned on by pressing these buttons. 1 STANDBY/ON Q button 2 Red / Green / Yellow / Blue buttons 3 HOME button 4 TOP MENU button 5 K / L / s / B buttons 6 MODE button 7 E (reverse) button 8 B (play) button* 9 H (skip) button 10 C (stop) button 11 Number buttons 12 DISPLAY button 13 AUDIO button 14 SUBTITLE button 15 REPEAT button 16 CLEAR button 17 F (pause) button 18 G (skip) button 19 D (forward) button 20 RETURN button 21 OK button 22 POP MENU/MENU button 23 EJECT A button*

ɶ Using the Remote Control Remote Control Usage Guidelines:
ɶ Home Menu When you turn on the unit, home menu will appear automatically. Otherwise, press [HOME].

“Disc”: Initiates playback of inserted disc, displays a list of tracks / files or the media filter menu
“USB”: Displays a list of tracks / files on the connected USB flash drive or the media filter menu
Disc · 30˚ 30˚


: 16:9 Wide : Auto : Auto 1 2
TV Aspect Progressive Mode Still Mode
Video Out Audio Out Network HDMI Playback Others
1 Category 2 Menus / Options Displays options for the highlighted item on the left whenever available.
ɶ Play Menu During playback, press [MODE] to display the play menu.
e.g.) Blu-ray Disc™






3.3 Connection to an Audio System When you change the connections, all devices should be turned off. When making connections with external devices, please refer to their user manuals for additional setup help. ɶ Digital Audio Connection
AV receiver / amplifier with an HDMI input jack

ɶ Audio Output from Digital Out (OPTICAL) jack
setting Ȼ “Bitstream” “LPCM”
“BD Audio Mode” setting Ȼ
Which audio format can be output depends on the compatibility of the connected device.
Dolby Digital Dolby Digital DownMix 2ch LPCM
Dolby Digital Plus Dolby Digital DownMix 2ch
LPCM* 2
Dolby TrueHD Dolby Digital DownMix 2ch
LPCM* 4
DTS® DTS® DownMix 2ch LPCM
DTS-HD® DTS® DownMix 2ch
LPCM* 5
LPCM DownMix 2ch LPCM DownMix 2ch LPCM
Dolby Digital Dolby Digital DownMix 2ch LPCM
DTS® DTS® DownMix 2ch LPCM
LPCM 2ch LPCM 2ch LPCM
DTS-CD DTS® DTS® DownMix 2ch LPCM
AVCHD Dolby Digital Dolby Digital DownMix 2ch LPCM LPCM DownMix 2ch LPCM DownMix 2ch LPCM Audio CD LPCM 2ch LPCM 2ch LPCM
DivX® Dolby Digital Dolby Digital Downmix 2ch PCM LPCM 2ch LPCM 2ch LPCM MP3 MP3 2ch LPCM 2ch LPCM Windows Media™ Audio WMA 2ch LPCM 2ch LPCM
Dolby Digital Dolby Digital DownMix 2ch LPCM MP2 2ch LPCM 2ch LPCM LPCM DownMix 2ch LPCM DownMix 2ch LPCM
DLNA Music MP3 / WMA / LPCM 2ch LPCM 2ch LPCM
*1 Fully decoded. *2 Only the independent substream is decoded. *3 Dolby TrueHD stream is decoded. *4 Only the Dolby Digital substream is decoded. *5 Only the core substream is decoded.

ɶ Audio Output from HDMI OUT jack
“Digital Output” setting Ȼ
“BD Audio Mode” setting
Which audio format can be output depends on the compatibility of the connected device.
Dolby Digital Dolby Digital Multi LPCM Mute Dolby Digital Plus
Dolby Digital Plus Dolby Digital Multi LPCM*1 Multi LPCM*2 Mute
Dolby TrueHD Dolby TrueHD Dolby Digital Multi LPCM*3 Multi LPCM*4 Mute
DTS® DTS® Multi LPCM Mute
DTS-HD® DTS-HD® DTS® Multi LPCM*1 Multi LPCM*5 Mute
LPCM Multi LPCM Multi LPCM Mute
Dolby Digital Dolby Digital Multi LPCM Mute
DTS® DTS® Multi LPCM Mute
LPCM 2ch LPCM 2ch LPCM Mute
DTS-CD DTS® DTS® Multi LPCM Mute
AVCHD Dolby Digital Dolby Digital Multi LPCM Mute LPCM Multi LPCM Multi LPCM Mute Audio CD LPCM 2ch LPCM 2ch LPCM Mute
DivX® Dolby Digital Dolby Digital Multi LPCM Mute LPCM 2ch LPCM 2ch LPCM Mute MP3 MP3 2ch LPCM 2ch LPCM Mute Windows Media™ Audio WMA 2ch LPCM 2ch LPCM Mute
Dolby Digital Dolby Digital Multi LPCM Mute MP2 2ch LPCM 2ch LPCM Mute LPCM Multi LPCM Multi LPCM Mute
DLNA Music MP3 / WMA / LPCM 2ch LPCM 2ch LPCM Mute
*1 Fully decoded. *2 Only the independent substream is decoded. *3 Dolby TrueHD stream is decoded. *4 Only the Dolby Digital substream is decoded. *5 Only the core substream is decoded.

3.4 Connection to the Network By connecting this unit to the Internet, you can update the software via the Internet, play contents stored on DLNA home media servers or access BD-Live™ service.

C Caution


3.5 Connecting the AC Adapter • After you made all necessary connections, connect the AC adapter to the DC IN 12V jack. Then connect the AC adapter to the AC outlet.

4.2 Initial Setup Please follow the instructions below to complete the initial setup. 1 While welcome screen is displayed, use [K / L] to select “Next”, then press [OK]. 2 Language setup screen will appear. Use [K / L / s / B] to select your language, then press [OK].
4.1 Finding the Viewing Channel / Source on Your TV After you have completed all the connections, you must find the viewing channel (external input source) on your TV. 1 After you have made all the necessary connections, press [STANDBY/ON Q] to turn on the unit. 2 Turn on your TV. 3 Press the button on the TV’s remote control that accesses the external input channel. It may be labelled “SOURCE”, “AV”, “AUX” or “SELECT” (refer to your TV’s user manual).
Please select your language for on-screen display.


Readable devices Playable files / data
AVCHD, DivX®,MP3, WMA, JPEG, picture-in- picture commentary, subtitles or other extras for BD-ROM ver. 2 (Profile 2.0 / Profile 1.1)
ɶ Playable Discs and Files
* Due to the intentional progression of the Blu-ray Disc™ format by its standard setting authority, the company cannot guarantee or warrant the playability of future extensions of the Blu-ray Disc™ format with this product. • Playback of 8 cm discs is not guaranteed.
AVCHD DVD-RW/-R USB flash drive
MP3
CD-RW/-R USB flash drive
* AVCHD (Advanced Video Coding High Definition) is a format for the recording and playback of high definition video.

ɶ Recommended Specifications AVCHD This unit cannot play back standalone AVCHD files (*.m2ts, *.mts or *.m2t) written to a DVD or copied to a USB flash drive. The DVD or USB flash drive containing AVCHD files must have a proper file and folder structure meeting AVCHD format specifications. Please use AVCHD compliant device / software to burn or copy AVCHD files to DVD or USB flash drive. (Please refer to user manuals of the device / software for more information.)
ɶ Folder / File Number Limitations Blu-ray Disc™, DVD and USB Flash Drive
ɶ Caution / Note for USB Flash Drive
Playable codec of AVI files
: DivX®3.x, DivX®4.x,
DivX®5.x, DivX®6.x Maximum size of a video
: 1920 x 1080 @ 60 fps
Sampling frequency of audio
: 16 kHz - 48 kHz
(MP3), MPEG1 audio layer 2, Dolby Digital
(MP3), 48 kbps - 192 kbps (WMA)
sampling is 4:4:4) 5,120 x 3,840 dots (sub sampling is up to 4:2:2) Lower limit : 32 x 32 dots Maximum file size of a picture
(8 MB - 2 GB) miniSD Card (16 MB - 2 GB) microSD Card (256 MB - 2 GB) SDHC Memory Card (4 GB - 32 GB) miniSDHC Card (4 GB - 8 GB) microSDHC Card (4 GB - 16 GB) - Readable files : AVCHD / DivX® / MP3 /
WMA / JPEG
C Caution · DivX® · JPEG Resolution

ɶ Unplayable Discs and Files The following discs will not be played back in this unit.
ɶ Region Codes This unit has been designed to play back BD-video with region “B” and DVD-video with region “2” or “ALL”. You cannot play back BD-video or DVD-video that are labelled for other regions. Look for the symbols on your BD-video or DVD-video. If these region symbols do not appear on your BD-video or DVD-video, you cannot play back the disc in this unit. The letter or number inside the globe refers to region of the world. A BD-video or DVD-video labelled for a specific region can only be played back in the unit with the same region code.
ɶ Hint for Disc Playback The contents of a disc are generally divided into sections or folders (groups of titles / files) as shown below.

chapter 1 chapter 2 chapter 1 chapter 2 chapter 3
track 1 track 2 track 3 track 4 track 5
file 1 file 2 file 3 file 4 file 5
BD-video · DVD-video

ɶ Picture File List

1 Current file number / Total number of files 2 Playback status 3 Media type 4 Group (folder) / File list (thumbnails)

ɶ Video / Music File List e.g.) MP3 mode
1 Elapsed playing time of the current track 2 Playback status 3 Media type 4 Group (folder) / File list 5 Name of disc / USB flash drive 6 Current track (file) number / Total number of tracks (files)
Photo

than 5 seconds. - Unplug the AC adapter and plug it in
again, then press [EJECT A].
C Caution

To skip to the next track / file: Press [G (skip)].
To skip to the previous track / file: Press [H (skip)].
To pause playback: Press [F (pause)].
To return to the normal playback: Press [B (play)].
To stop playback: Press [C (stop)]. Playback will be in Resume-On-Stop mode.
ɶ Resume-On-Stop Mode Blu-ray Disc™ / DVD / AVCHD: When you press [B (play)] next time, the playback will start from the point where it has been stopped. Audio CD / DivX®: Playback will start from the point where it is stopped next time you press [B (play)]. If you press [OK] instead of [B (play)], playback will start from the beginning of the track / file instead of resuming from the stop point. MP3 / WMA / JPEG / KODAK Picture CD: Playback will start from the beginning of the current file next time you press [B (play)] or [OK].

3 a For “Music” or “Video”, track / file list will
be displayed. Select a group (folder) or track / file you want to play back then press [B (play)] or [OK] to start playback.
automatically.

D Note for JPEG / KODAK Picture CD
3 Playback may start automatically. If not, press [B (play)]. Some discs may show a title or a disc menu. In this case, refer to “Using the Title / Disc / Pop-up Menu” on page 29.
To pause playback: Press [F (pause)].
To return to normal playback: Press [B (play)].
To stop playback: Press [C (stop)]. Playback will be in Resume-On-Stop mode, and the home menu will appear.
ɶ Resume-On-Stop Mode When you press [B (play)] next time, the playback will start from the point where it has been stopped.
This unit can play back Blu-ray 3D™ discs which contain stereoscopic 3D video. In order to view Blu-ray 3D™ videos, you need to have the following:
sickness - Children from walking age to seven years - Pregnant woman For more information, refer to “IMPORTANT HEALTH AND SAFETY INFORMATION FOR 3D TELEVISIONS” on page 53.
C Caution

1 Connect a USB flash drive to the USB input. 2 Press [HOME]. 3 Use [K / L / s / B] to select “USB”, then press [OK]. 4 Follow steps 2 to 3 in “Playing Back a Disc” on page 24. To Remove the USB Flash Drive In stop mode, pull it out slowly.
You can play back AVCHD / DivX® / MP3 / WMA / JPEG files in a USB flash drive. With the USB flash drive, you can also enjoy the following functions.
- Special additional contents for BD-ROM Profile 1 ver.1.1. (For more information about the special additional contents, refer to the instruction book that came with the disc.) - BD-Live™ function (BD-ROM ver. 2 Profile 2.0). (For more information about BD- Live™, refer to page 32.)
. , “ = + [ ] ; / \ : | ¥

C Caution

6.4 Playing Back Video / Music / Photo from DLNA Certified Home Media Servers

On this unit, you can play video, music and photo files stored on DLNA certified home media servers connected to your home network. In order to use this feature, you must connect this unit to the Internet.
[G (skip)] For video files, playback will be step by step in pause mode. [D (forward)] / [E (reverse)]
During playback, press to fast reverse/forward the playback. [F (pause)] Pause the playback. [B (play)] Return to the normal playback.
Stop the playback. (For video files, playback will be in Resume- On-Stop mode.) Resume-On-Stop mode for video files Playback will start from the point where it is stopped next time you press [B (play)]. If you press [OK] instead of [B (play)] playback will start from the beginning of the file instead of resuming from the stop point.
[TOP MENU] Go to the root directory of the file list.
Button Action · [C (stop)]

You cannot play back DivX® VOD files with an expired rental period. “This unit does not support this video format.” You cannot play back DivX® files whose resolution exceeds 1920 x 1080. “This unit does not support this audio format.” For DivX® files with audio format other than MPEG 1 audio layer 3 (MP3), MPEG 1 audio layer 2 and Dolby Digital, audio will not be output and only the video will be output.
Useful tips for purchased or rented official DivX Certified® Videos
ɶ Possible Errors “This DivX rental has used { of { views. Continue?” Some DivX® VOD files are restricted with limited playable times. You cannot play them back beyond the limit. “Your unit is not authorized to play this DivX protected video.” You cannot play back DivX® VOD files obtained with different registration codes on this unit. “This DivX rental has used { of { views. This DivX rental has expired.”
![Page 29 of the Funai B4-M502 user manual — [SUB]](/cdn/reader/e6/e6fb337a3ac212f9c93ea254b05cc0ccbbc4e83fecd04864d5e7ab1fc3aed81a/images/page-29.webp?w=400)
6.7 Using the Title / Disc / Pop-up Menu
Subtitles created by the user can be displayed during DivX® playback. 1 Follow steps 1 to 2 in “Playing Back a Disc” on page 24. 2 Select a file you want to play back, then press [Yellow].
Some BD-videos, DVD-videos or AVCHD files may contain a title menu which describes the contents of the disc, or a disc menu which guides you through the available functions in the disc. With such discs, a title menu or a disc menu may appear automatically when you insert the disc. Otherwise, press [TOP MENU] or [POP MENU/MENU] to call up the menu. Refer to the disc’s manual on how to navigate through the menu.

- - - / 123 Ê
Test1.avi
DATA
[ASS]
[SMI]
[SRT]
[SSA]
[TXT]
same name. - Playback file and subtitle file must be
located in the same folder. - Only subtitle files with the following
extensions are supported; .smi (.SMI), .srt (.SRT), .sub (.SUB), .ass (.ASS), .ssa (.SSA), .txt (.TXT). (.sub (.SUB) and .txt (.TXT) may not be recognised.) - Subtitles that exceeds the playback time
of the DivX® file will not be displayed. • If the DivX® subtitle file contains more than one subtitle language, press [SUBTITLE] to call up the subtitle setting menu and use [K / L] to select your desired subtitle.
Subtitle List · [Off] · File List

7.1 Fast Forward / Fast Reverse
1 During playback, press [F (pause)]. Then press [D (forward)]. Every time you press [D (forward)], the playback speed changes in 3 different levels. 2 Press [B (play)] to return to normal playback.
1 During playback, press [D (forward)] repeatedly for fast forward. During playback, press [E (reverse)] repeatedly for fast reverse. Every time you press [D (forward)] or [E (reverse)], the playback speed will change. 2 Press [B (play)] to return to normal playback.
1 In pause mode, press [G (skip)] repeatedly. Every time you press [G (skip)], playback will advance one step at a time. 2 Press [B (play)] or [F (pause)] to return to normal playback.

7.4 Repeat Playback Available repeat function varies depending on the discs. 1 During playback, press [REPEAT]. 2 Use [K / L] to select the desired repeat mode.
1 Follow steps 1 to 2 in “Playing Back a Disc” on page 24. 2 Open the folder which contains the desired JPEG files. 3 Use [K / L / s / B] to select a desired file to be played back, then press [B (play)] or [OK]. • An image will be played back from the selected file and go to the next one in turn every 10 seconds. 4 Press [C (stop)] to stop playback.

Repeat Mode Available Media Chapter Repeat The current chapter will be played back repeatedly.
Title Repeat The current title will be played back repeatedly.
Track Repeat The current track or file will be played back repeatedly.
To return to the first item: Press [TOP MENU]
To return to the file played last: Press [POP MENU/MENU]
All Repeat All tracks in the media will be played back repeatedly. Group Repeat The current group (folder) will be played back repeatedly.
Random Repeat (Audio CD) Repeats the random playback. Random Repeat (DivX® / MP3 / WMA / JPEG) Repeats the random playback in a folder.
3 Press [RETURN] to exit.

7.7 Enjoying BD-Live™ Discs Using Internet
Some BD-videos have the PiP function which enables you to display the secondary video in the primary video.
You can enjoy BD-Live™ which enables you to use interactive features when the unit is connected to the Internet. Examples of BD-Live™ features:

depending on the disc. Follow the instructions given by the disc when using the BD-Live™ function. - Insert a USB flash drive of at least
1GB capacity before using BD- Live™ features on a Blu-ray Disc™. - Do not remove the USB flash drive
while using BD-Live™ features.
PiP · Secondary video · Primary video

D Note for AACS Online
1 During playback, press [G (skip)] to skip the current track or file and move to the next. The track / file will move forward one at a time. To go back to the beginning of the current track / file, press [H (skip)]. Press [H (skip)] repeatedly to go to the previous track / file. The track / file will move backward one at a time.
ɶ Using [H (skip)] / [G (skip)] 1 During playback, press [G (skip)] to skip the current title or chapter and move to the next. The title or chapter will move forward one at a time. • If there is no chapter in one title, the current title may be skipped. To go back to the beginning of the current title or chapter, press [H (skip)]. Press [H (skip)] repeatedly to go to the previous title or chapter. The title or chapter may move backward one at a time.
1 During playback, press [MODE]. 2 Use [K / L] to select “Search”, then press [OK]. • For video files on DLNA server, skip to step 3. 3 Use [K / L] to select “ ”, then press [OK]. e.g.) Blu-ray Disc™
ɶ Using [MODE] 1 During playback, press [MODE] to display the play menu. 2 Use [K / L] to select “Search”, then press [OK]. 3 Use [K / L] to select “TT” or “CHP”, then press [OK]. e.g.) Blu-ray Disc™
00:12:44 / 11:13:14 Search
4 Use [the Number buttons] or [K / L] to enter the time count you want to jump to. e.g.) Entering 1 hour 45 minutes and 15 seconds. Press 5 Press [OK]. Playback will start from the desired time entered. 6 Press [RETURN] to exit.
001 / 999 Search
4 Use [K / L / s / B] to select the title / chapter number. 5 Press [OK]. Playback will start from the beginning of the title / chapter. 6 Press [RETURN] to exit.
ɶ Using [the Number buttons] (Direct Search)
Chapter Search During playback, enter the chapter number you want to search using [the Number buttons]. Playback of the chapter will start in a few seconds.

7.11 Switching Subtitles Some video materials may have subtitles in one or more languages. For commercially available discs, the supported languages can be found on the disc case. Follow the steps below to switch the subtitle language during playback.
7.12 Switching Audio Soundtrack When playing back video material recorded with two or more soundtracks (these are often in different audio languages or audio formats), you can switch them during playback. For Blu-ray Disc™, available audio varies depending on “BD Audio Mode” setting.
1 During playback, press [SUBTITLE]. 2 Use [K / L] to select “Primary”, “Secondary” or “Style”, then press [OK].
“Primary”: Sets the subtitle for the primary video.
“Secondary”: Sets the subtitle for the secondary video.
1 During playback, press [AUDIO]. 2 Use [K / L] to select “Primary” or “Secondary”, then press [OK].
“Style”: Sets style of the subtitle. 3 Use [K / L] to select your desired subtitle or style.
“Primary”: Sets the audio for the primary video.
“Secondary”: Sets the audio for the secondary video. 3 Use [K / L] to select your desired audio stream channel.

1 ENG / 255 Off Off
1 ENG Dolby D Multi-ch / 3 1 ENG DTS Multi-ch / 3 [Decoding Format] : Dolby D
1 During playback, press [SUBTITLE]. 2 Use [K / L] to select your desired subtitle.
1 During playback, press [AUDIO]. 2 Use [K / L] to select your desired audio stream channel.
1 ENG Dolby D
“Stereo”: Both right and left channels are active (stereo).
“L-ch”: Only left channel is active.
“R-ch”: Only right channel is active. 3 Press [RETURN] to exit.

Reduces the noise of the playback picture. 1 During playback, press [MODE] to display the play menu. 2 Use [K / L] to select “Noise Reduction”, then press [OK]. 3 Use [K / L] to select your desired setting. e.g.) Blu-ray Disc™
“On”: Activates noise reduction.
“Off”: Deactivates noise reduction. 4 Press [RETURN] to exit.
You can enjoy stereophonic virtual space through your existing 2 channel stereo system. 1 During playback, press [MODE] to display the play menu. 2 Use [K / L] to select “Virtual Surround”, then press [OK]. 3 Use [K / L] to select your desired setting. e.g.) Blu-ray Disc™
Some BD-videos and DVD-videos contain scenes which have been shot simultaneously from various angles. You can change the camera angle when appears on the TV screen. 1 During playback, press [MODE] to display the play menu. 2 Use [K / L] to select “Angle”, then press [OK]. • The selected angle will be displayed on the display bar at the top of the TV screen. 3 Use [K / L] to select your desired angle. 4 Press [RETURN] to exit.
“On”: Activates surround effects.
“Off”: Deactivates surround effects. 4 Press [RETURN] to exit.

In the setup menu, you can customise various kinds of settings as you prefer. Refer to the following instructions to navigate through the setup menu. 1 Press [HOME] to access the home menu. 2 Use [K / L / s / B] to select “Settings”, then press [OK]. 3 Use [K / L] to select the desired setting, then press [OK]. 4 Use [K / L] to move the highlight up and down in the list. 5 To make a selection or to access options of an item, select the desired item, then press [OK]. • To go back to the previous screen, press [RETURN]. 6 Press [HOME] to exit. Refer to the following table for the types of settings you can customise. The item highlighted in grey is the default setting.
Category Menus / Options Video Out TV Aspect 4:3 Letter Box 4:3 Pan & Scan 16:9 Wide 16:9 Squeeze Progressive Mode Auto Video Still Mode Auto Field Frame Audio Out DRC Auto On Off Downsampling On Off BD Audio Mode Mix Audio Output HD Audio Output Digital Output Bitstream LPCM Network Network Connection Start Connection Test Network Status HDMI fun-Link (HDMI CEC) On Off 3D Output Auto 2D 3D Type Frame Sequential Side By Side Checkerboard

Category Menus / Options HDMI Video Resolution Auto 480p/576p Deep Colour Auto Off Audio Output Bitstream LPCM Off Playback Language Auto ǎȇǸǰǭǽǾǷǵ Italiano ćeština Polski Nederlands Romana English ǝȀǾǾǷǵǶ Français SlovenĈina Deutsch Español Magyar Audio Original Bulgarian Italian Chinese Japanese Czech Korean Danish Norwegian Dutch Polish English Portuguese Finnish Romanian French Russian German Slovak Greek Spanish Hungarian Swedish Icelandic Turkish Irish Other Subtitle Off Bulgarian Italian Chinese Japanese Czech Korean Danish Norwegian Dutch Polish English Portuguese Finnish Romanian French Russian German Slovak Greek Spanish Hungarian Swedish Icelandic Turkish Irish Other

Category Menus / Options Playback Disc Menu Bulgarian Italian Chinese Japanese Czech Korean Danish Norwegian Dutch Polish English Portuguese Finnish Romanian French Russian German Slovak Greek Spanish Hungarian Swedish Icelandic Turkish Irish Other DivX Subtitle Czech Polish Dutch Romanian English Russian1 French Russian2 German Slovak Hungarian Spanish Italian BD Rating Level Off Age Setting DVD Rating Level Off 4 8 3 7 2 6 1 5 Password Change Others Software Update Disc Network USB Automatically check for latest software
On Off Quick Start Mode* On Off Angle Icon On Off LED Light On Off DivX(R) VOD Register Deregister Product Info Initialise Reset Settings Format USB (Unit) Erase Saved BD-ROM Data (USB) Erase Saved BD-ROM Data Reset Network Settings OSS * When “Quick Start Mode” is set to “On”, power consumption during standby mode will increase.

[HOME] Ȼ “Settings” Ȼ “Network” Ȼ “Network Connection”
ɶ Auto Select “Auto” to set the network setting automatically. 1 Follow steps 1 to 3 in “Connection Test” on page 39. 2 Use [K / L] to select “Start”, then press [OK]. 3 Use [K / L] to select “Auto”, then press [OK]. • The unit will start the connection test automatically and the test result will appear right after the test finishes. 4 Select “End” to activate the network settings and set the network connection automatically.
Set up network connection settings in order to use BD-Live™, DLNA home media server or network update function.
ɶ Connection Test After you enable a network connection or change the network settings, always perform the connection test to check if the connection is correctly made. 1 Use [K / L / s / B] to select “Settings” in the home menu, then press [OK]. 2 Use [K / L] to select “Network”, then press [OK]. 3 Use [K / L] to select “Network Connection”, then press [OK]. 4 Use [K / L] to select “Connection Test”, then press [OK]. • Connection test will start automatically and the test result will appear right after the connection test finishes.
ɶ Manual In the following cases, select “Manual” to set each setting as necessary.
- When connection test failed with the setting of “Auto”. - When instructed by your Internet service provider to make specific settings in accordance with your network environment. 1 Follow steps 1 to 2 in “Auto” on page 39. 2 Use [K / L] to select “Manual”, then press [OK]. 3 Use [K / L] to select “IP Address”, then press [OK].
“Connecting...”: Activates surround effects.
“Pass”: Deactivates surround effects.
“Failed”: Network connection failed. 5 If the connection test passes, press [OK].

4 IP address setting screen will appear. Enter IP address with cursor buttons and number buttons.
Please enter the IP Address.
Please input the Proxy Address with software keyboard.
1 2 3 4 5 6 7 8 9 0 SP a/A/@
a b c d e f g h i j h l m n o p q r s t u v w x y z . - - - < >
Done Cancel Clear a/A/@
[K / L / s / B]: Move the highlight.
[the Number buttons]: Enter number.
[OK]: Enter the highlighted number or letter.
[Red]*: Set the entered number or letter.
[Green]: Exit the network setting.
[Yellow]: Clear the entered number or letter.
[Blue]*: Switch between abc, ABC and @!?. * These buttons can be used in other network settings.

Network Setting s (Manual)
Please enter your network settings.
7 Use [K / L / s / B] to select “OK”, then press [OK]. 8 Use [K / L / s / B] to select “Next”, then press [OK].

11 Press [Red] to go to the proxy port setting screen. Enter proxy port number with number buttons.
D Note for “IP Address”, “Subnet

Please input the Proxy Port.
12 Use [K / L / s / B] to select “OK”, then press [OK]. 13 Connection speed setting screen will appear. Use [K / L] to select the desired setting, then press [OK]. (The default setting is “Auto”.) 14 BD-Live™ setting screen will appear. Use [K / L] to select the desired setting, then press [OK]. (The default setting is “Allow”.)
D Note for “Proxy Address” and “Proxy
“Allow”: Internet access is permitted for all BD- Live™ contents.
“Limited Allow”: Internet access is permitted only for BD- Live™ contents which have content owner certificates. Internet access without the certificates is prohibited.
ɶ Network Status You can check the current status of network status. 1 Follow steps 1 to 2 in “Connection Test” on page 39. 2 Use [K / L] to select “Network Status”, then press [OK]. • The current network settings will be displayed. 3 Press [HOME] to exit.
“Prohibit”: Internet access is prohibited for all BD- Live™ contents. 15 Connection test confirmation screen will appear. Select “Yes” to start the connection test and the test result will appear right after the connection test finishes. 16 Select “End” to complete the settings.

9.3 HDMI Video Resolution
[HOME] Ȼ “Settings” Ȼ “HDMI” Ȼ “Video Resolution”
[HOME] Ȼ “Settings” Ȼ “HDMI” Ȼ
CEC)”
Set the resolution of the video signal being output from the HDMI OUT jack. You can select the desired “Video Resolution” among the settings listed below: “Auto”,“480p/ 576p”. Actual Output Resolution:
fun-Link (HDMI CEC) allows integrated system control over HDMI and is part of the HDMI standard. This function may not work properly depending on the device connected to the unit. When “fun-Link (HDMI CEC)” setting is set to “On” functions listed below will be available.
Source 480p, 576p 720p 1080i 1080p
ɶ One Touch Play fun-Link (HDMI CEC) operations are performed using remote control buttons. The TV will automatically be turned on and switched to the appropriate input source signal.
The highest resolution supported by your display device will be automatically in effect.
Buttons for one touch play:
- [B (play)], [H (skip)], [G (skip)], [the Number buttons], [HOME] or [DISPLAY] - [TOP MENU] or [POP MENU/MENU] (when a disc is inserted in the unit)
Composite video output (AV OUT) jack can only output 480i, 576i.
ɶ One Touch Standby When you press and hold [STANDBY/ON Q] for 2 seconds, it will turn off the power to the TV first and then turn off the power to this unit. When the connected fun-Link (HDMI CEC) compatible display device is turned off first, this unit will be turned off subsequently.
ɶ System Information Get & Set Menu Language The unit recognises the OSD language set on the TV and automatically sets the same language as the player menu language (OSD menu language) for this unit. Refer to the “Language” on page 37 for available languages.

3 Use [K / L] to select “BD Rating Level”, then press [OK]. 4 Use [the Number buttons] to enter your 4-digit password. 5 Use [K / L] to select your desired option, then press [OK].
Copyright protection system To play back the digital video images of a BD- video or DVD-video via an HDMI connection, it is necessary that both the player and the display device (or an AV receiver / amplifier) support a copyright protection system called HDCP (high-bandwidth digital content protection system). HDCP is copy protection technology that comprises data encryption and authentication of the connected AV device. This unit supports HDCP. Please read the operating instructions of your display device (or an AV receiver / amplifier) for more information.
“Off”: To release the limitation.
“Age Setting”: To set the age limitation. • After selecting “Age Setting”, use [the Number buttons] to enter the age. (e.g., For age 6, enter [0] + [0] + [6]. For age 15, enter [0] + [1] + [5].) 6 Press [HOME] to exit.
ɶ DVD Rating Level
[HOME] Ȼ “Settings” Ȼ “Playback” Ȼ “DVD Rating
1 Use [K / L / s / B] to select “Settings” in the home menu, then press [OK]. 2 Use [K / L] to select “Playback”, then press [OK]. 3 Use [K / L] to select “DVD Rating Level”, then press [OK]. 4 Use [the Number buttons] to enter your 4-digit password. 5 Use [K / L] to select your desired level, then press [OK]. 6 Press [HOME] to exit. RATING EXPLANATION
general / children) can be played back. 7: No one under 17. 6: Restricted; under 17. 5: Parental guidance recommended. 4: Unsuitable for children under 13. 3: Parental guidance suggested. 2: General audience. 1: Suitable for children.
ɶ BD Rating Level
[HOME] Ȼ “Settings” Ȼ “Playback” Ȼ “BD Rating
1 Use [K / L / s / B] to select “Settings” in the home menu, then press [OK]. 2 Use [K / L] to select “Playback”, then press [OK].
Level” · Level”

1 Use [K / L / s / B] to select “Settings” in the home menu, then press [OK]. 2 Use [K / L] to select “Others”, then press [OK]. 3 Use [K / L] to select “Software Update”, then press [OK]. 4 Use [K / L] to select “Disc” or “USB”, then press [OK]. 5 Use [s / B] to select “Yes”, then press [OK]. 6 Insert the disc or USB flash drive for software update. 7 After loading disc or USB flash drive, confirmation message will appear. Select “Yes” and press [OK] to start updating. • It may take a while to complete the updating. 8 After the update finishes, this unit will restart. Remove the disc or USB flash drive from the unit.
[HOME] Ȼ “Settings” Ȼ “Playback” Ȼ “Password
1 Use [K / L / s / B] to select “Settings” in the home menu, then press [OK]. 2 Use [K / L] to select “Playback”, then press [OK]. 3 Use [K / L] to select “Password Change”, then press [OK]. 4 Use [the Number buttons] to enter your 4-digit password. 5 Use [the Number buttons] to enter a new 4-digit password. 6 Use [the Number buttons] to retype the same new 4-digit password. 7 Use [s / B] to select “OK”, then press [OK]. 8 Press [HOME] to exit.
To cancel parental lock temporarily: Some discs allow you to cancel parental lock temporarily. With these discs, the message below will appear when you try to play them back. “Enter current password.” Follow the instruction which appears on the TV screen to cancel parental lock.
[HOME] Ȼ “Settings” Ȼ “Others” Ȼ “Software
This unit lets you update the software yourself using a software update disc or USB flash drive. To update the software, you must first download the latest version software to a PC. Then write the update to a disc or USB flash drive, then execute “Software Update”.
ɶ Disc / USB Update You can update the software by using a disc or USB flash drive. Prepare a software update disc or USB flash drive: Access www.funai.eu, and download the latest version software to a blank disc or USB flash drive using a PC by following the directions described on the website.

6 After updating finishes, this unit will restart automatically.
5 Use [s / B] to select “Yes”, then press [OK]. 6 Confirmation message will appear. Press [OK] to complete the setting. 7 Press [HOME] to exit.
[HOME] Ȼ “Settings” Ȼ “Others” Ȼ “Initialise”
Menus to reset player settings, format USB flash drive, local storage and clear network settings. 1 Use [K / L / s / B] to select “Settings” in the home menu, then press [OK]. 2 Use [K / L] to select “Others”, then press [OK]. 3 Use [K / L] to select “Initialise”, then press [OK]. 4 Use [K / L] to select the desired setting, then press [OK].
“Reset Settings”: All the settings except for the parental and network settings will be reset to default.
“Format USB” (Available only when a USB flash drive is connected): Initialise the USB flash drive.
“(Unit) Erase Saved BD-ROM Data”: Clears the data saved for the BD-ROM contents, such as BD-ROM game scores, on this player.
“(USB) Erase Saved BD-ROM Data” (Available only when a USB flash drive is connected): Clears the supplemental data for the BD- ROM playback, such as subtitle data, from the USB flash drive.
“Reset Network Settings”: Resets the network setting to the default.
C Caution · C Caution

Problem Tip No power. Check if the AC adapter is properly connected. Unplug the AC adapter once, and wait for 5-10 seconds and then plug it in again. No sound or picture. Check if the connected TV is turned on. Check if the connections are made securely and correctly. Check whether the connected TV or other device supports HDCP. (This unit will not output a video signal unless the other device supports HDCP.) Check whether the output format of this unit (HDMI FORMAT) matches the supported input format of the other connected device. Touch and hold [B (play)] on the front panel for 5 seconds to change the setting back to its default. No reaction to the remote control.
Connect the unit to the power outlet. Point the remote control at the unit. Insert the batteries with the correct polarity. Insert new batteries in the remote control. No audio / video signal on the display device via HDMI cable.
If the unit is connected to an unauthorised display device with an HDMI cable, the audio / video signal may not be output. Perform an HDMI cable hotplug, wherein you disconnect the HDMI cable from the TV and this unit and then reconnect it to both the devices while they are powered on. Ensure that your HDMI cable is certified. No high-definition video signal on the TV screen.
Does the disc contain high-definition video? High-definition video is not available when the disc does not contain it. Does the TV support high-definition video? High-definition video is not available when the TV does not support it. No 3D video on the TV screen. Check if your TV is 3D capable. Use a 3D compatible HDMI cable to connect the 3D capable TV. Set “3D Output” to “Auto (XX)”. (Refer to page 36.) Set “3D Type” to the same type as your TV’s 3D type setting. (Refer to page 36.) Check the battery levels of your glasses. Wear 3D glasses and make sure they are switched on and in sync with your TV. Refer to your 3D TV’s user manual for more information. No audio signal from the loudspeakers of the TV screen.
Assign the audio input of the TV to the corresponding video input. Ensure that the TV’s speakers are turned on in the TV menu. No audio signal from the loudspeakers of the audio system.
Turn on the audio system. Set the audio system to the correct external audio input. Increase the volume level of the audio system. Distorted picture. Sometimes a small amount of picture distortion may appear. This is not a malfunction. Connect this unit directly to the TV. If the audio / video cables are connected to a VCR, pictures may be distorted due to the VCR copyright protection system.

Problem Tip Cannot remove the disc. Press and hold [EJECT A] for more than 5 seconds. Unplug the AC adapter and plug it in again, then press [EJECT A]. Completely distorted picture or black / white picture with Blu-ray Disc™ / DVD.
Make sure the disc is Region compatible or otherwise compatible with this unit.
No sound or distorted sound. Adjust the volume Check if speakers are connected correctly. Check the HDMI connections. Check the settings in “Audio Out” menu. Picture freezes momentarily during playback.
Make sure that the disc was recorded in the UDF, ISO9660 or JOLIET format. Cannot play back MP3 files from a disc.
Make sure that the disc was recorded in the UDF, ISO9660 or JOLIET format. Make sure that the bit rate of the MP3 files is between 112 and 320 kbps. Make sure that the sample rate of the MP3 files is 32 kHz, 44.1 kHz or 48 kHz. Cannot play back WMA files from a disc.
Make sure that the sample rate of the WMA files is 44.1 kHz or 48 kHz.
No return to start-up screen when disc is removed.
Reset this unit by turning it off for 30 seconds, then on again.
The unit does not respond to the remote control.
Aim the remote control directly at infrared sensor window on the front panel. (Refer to page 8) Reduce the distance to infrared sensor window. Check the + / – polarity of the batteries and replace both batteries in the remote control if required. in the upper right hand corner of the TV screen.
The operation is not possible.
Buttons do not work or the unit stops responding.
To completely reset the unit, touch and hold [Q (standby/on)] on the front panel for 10 seconds to shut down the unit or unplug the AC adapter from the AC outlet for 5 - 10 seconds. The unit does not respond to some operating commands during playback.
Operations may not be permitted by the disc. Refer to the instructions of the disc.
The unit cannot read Blu-ray Disc™ / DVD/ CD.
Condensation? (Let sit 1 or 2 hours) Check if the disc is compatible with this unit. (Refer to page 19.) Wipe dirt off the disc or replace the disc.

Problem Tip Angle does not switch. The angle cannot be switched for Blu-ray Disc™ / DVD which do not contain multiple angles. In some cases multiple angles are only recorded for specific scenes. Playback does not start when the title is selected.
Check the settings in “Parental” menu.
The password for rating level has been forgotten.
Enter the default password “4737”, then your forgotten password will be cleared. Cannot find a JPEG file. Make sure that the selected group (folder) does not contain more than 9,999 files for Blu-ray Disc™ / DVD / USB flash drive, and 999 files for CD. Make sure that the file extension is .jpg, .JPG, .jpeg or .JPEG. Cannot find an MP3 and WMA file.
Make sure that the selected folder does not contain more than 9,999 files for Blu-ray Disc™ / DVD / USB flash drive, and 999 files for CD. Make sure that the file extension is .mp3 or .MP3 for MP3, and .wma or .WMA for Windows Media™ Audio.
Cannot play back DivX® files from a disc.
Make sure that the file extension is .avi, .AVI, .divx or .DIVX.
Ensure that the DivX® video on the disc meets the DivX® playback capabilities of this device outlined on page 20. Error message appears when I select “Auto” in the “Language”.
Make sure that the unit is connected to a fun-Link (HDMI CEC) TV and the “fun-Link (HDMI CEC)” is set to “On”. This error message may appear when your TV’s OSD language is not supported by this unit. Cannot play back AVCHD file. This unit cannot play back standalone AVCHD files (*.m2ts, *.mts or *.m2t) written to a DVD or copied to a USB flash drive. The DVD or USB flash drive containing AVCHD files must have a proper file and folder structure meeting AVCHD format specifications. Please use AVCHD compliant device / software to burn or copy AVCHD files to DVD or USB flash drive. (Please refer to user manuals of the device / software for more information.) Cannot connect to the network. Check if the network connection is properly made. Turn on the modem or router. Check the network settings. Check if the router and/or modem is correctly connected. Check the BD-Live™ setting in “Manual” setup on page 41. When connecting directly to a modem via a LAN cable, you might need to power cycle the modem to reset settings on the modem. Cannot connect to the network while my PC is connected to the network.
Check the content of your Internet service contract to see if your Internet Service Provider prevents multiple terminals connecting at the same time.
The capacity of the USB flash drive decreased.
Data may be written to the USB flash drive when a BD-video that supports the virtual package is used and a USB flash drive is connected. MPEG-2 video and audio on the USB flash drive cannot be played back.
MPEG-2 is noncompliant on this unit.
The contents of the USB flash drive cannot be read.
The USB flash drive is not compatible or the contents on the USB flash drive may be damaged. Turn off and then turn the unit on again.

Problem Tip Cannot use the BD-Live™ function or download of data does not perform properly.
Connect a USB flash drive before inserting the disc. Connect a USB flash drive with enough capacity (1 GB or more). Check if a USB flash drive is correctly inserted. Make sure the write-protect switch on the USB flash drive is not enabled. Cannot play back BD-video (BD- ROM Profile 2.0).
Connect a USB flash drive (1 GB or more) which is formatted on this unit. Some discs with BD-Live™ function require memory when playing back the content. Do not remove the USB flash drive during playback. Folder or files stored on DLNA home media server are not displayed in the file list or cannot be played back.
Check the setting on your home media server. (Refer to the user manual of the home media server.) Check the network connection and settings.

Language Code Language Code Language Code Language Code A-B French [FRE] 5264 Macedonian 5957 Siswat 6565 Abkhazian 4748 Frisian 5271 Malagasy 5953 Slovak [SLO] 6557 Afar 4747 Galician 5358 Malay 5965 Slovenian 6558 Afrikaans 4752 Georgian 5747 Malayalam 5958 Somali 6561 Albanian 6563 German [GER] 5051 Maltese 5966 Spanish [SPA] 5165 Amharic 4759 Greek [GRE] 5158 Maori 5955 Sundanese 6567 Arabic 4764 Greenlandic 5758 Marathi 5964 Swahili 6569 Armenian 5471 Guarani 5360 Moldavian 5961 Swedish [SWE] 6568 Assamese 4765 Gujarati 5367 Mongolian 5960 T Aymara 4771 Hausa 5447 Nauru 6047 Tagalog 6658 Azerbaijani 4772 Hebrew 5569 Nepali 6051 Tajik 6653 Bashkir 4847 Hindi 5455 Norwegian [NOR] 6061 Tamil 6647 Basque 5167 Hungarian [HUN] 5467 O-R Tatar 6666 Bengali;Bangla 4860 I-K Occitan 6149 Telugu 6651 Bhutani 5072 Icelandic [ICE] 5565 Oriya 6164 Thai 6654 Bihari 4854 Indonesian 5560 Oromo (Afan) 6159 Tibetan 4861 Bislama 4855 Interlingua 5547 Panjabi 6247 Tigrinya 6655 Breton 4864 Interlingue 5551 Pashto;Pushto 6265 Tonga 6661 Bulgarian [BUL] 4853 Inupiak 5557 Persian 5247 Tsonga 6665 Burmese 5971 Irish [GLE] 5347 Polish [POL] 6258 Turkish [TUR] 6664 Byelorussian 4851 Italian [ITA] 5566 Portuguese [POR] 6266 Turkmen 6657 C-E Japanese [JPN] 5647 Quechua 6367 Twi 6669 Cambodian 5759 Javanese 5669 Rhaeto-Romance 6459 U-Z Catalan 4947 Kannada 5760 Romanian [RUM] 6461 Ukrainian 6757 Chinese [CHI] 7254 Kashmiri 5765 Russian [RUS] 6467 Urdu 6764 Corsican 4961 Kazakh 5757 S Uzbek 6772 Croatian 5464 Kinyarwanda 6469 Samoan 6559 Vietnamese 6855 Czech [CZE] 4965 Kirghiz 5771 Sangho 6553 Volapuk 6861 Danish [DAN] 5047 Kirundi 6460 Sanskrit 6547 Welsh 4971 Dutch [DUT] 6058 Korean [KOR] 5761 Scots Gaelic 5350 Wolof 6961 English [ENG] 5160 Kurdish 5767 Serbian 6564 Xhosa 7054 Esperanto 5161 L-N Serbo-Croatian 6554 Yiddish 5655 Estonian 5166 Laothian 5861 Sesotho 6566 Yoruba 7161 F-H Latin 5847 Setswana 6660 Zulu 7267 Faroese 5261 Latvian;Lettish 5868 Shona 6560
Fiji 5256 Lingala 5860 Sindhi 6550
Finnish [FIN] 5255 Lithuanian 5866 Singhalese 6555

General Signal system NTSC/PAL colour Power requirements DC 12 V (DC IN terminal) Power consumption 14 W (standby: 0.5 W) Dimensions (width x height x depth) 180 x 218 x 158 mm Weight 2.0 kg Operating temperature 5 °C to 40 °C Operating humidity Less than 80 % (no condensation)
Terminals DC input 12 V, 1500 mA USB input TYPE A
Composite-video: 1 Vp-p (75 ƙ) Audio L/R: 2 Vrms (1 kƙ) Audio output (Digital) (Optical jack x 1) Digital connector HDMI output (HDMI jack x 1)

Dear Customer : Please note FUNAI will not be responsible for Internet services and contents.In addition, FUNAI will not charge you for any data transferred from the Internet, but it might cause additional costs depending on your contract with the Internet provider.
Content and services made available through this product are transmitted by third parties by means of networks and transmission facilities over which Company has no control and third party services may be terminated or interrupted at any time, and Company makes no representation or warranty that any content or service will remain available for any period of time. Without limiting the generality of this disclaimer, Company expressly disclaims any responsibility for any interruption or suspension of any content or service made available through this product. Company is not responsible for customer service related to the content and services. Any question or request for service relating to the content or services should be made directly to the respective content and service providers.
THIRD PARTY CONTENT AND SERVICES MADE AVAILABLE THROUGH THIS PRODUCT ARE PROVIDED “AS IS.” COMPANY DOES NOT WARRANT CONTENT OR SERVICES SO PROVIDED, FOR ANY PURPOSE WHATSOEVER. COMPANY EXPRESSLY DISCLAIMS ANY WARRANTIES, EXPRESS OR IMPLIED INCLUDING WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ACCURACY, VALIDITY, TIMELINESS, LEGALITY, SUITABILITY, OR QUALITY OF ANY CONTENT OR SERVICE MADE AVAILABLE THROUGH THIS PRODUCT.
IN NO EVENT SHALL COMPANY BE LIABLE FOR, ANY DAMAGES, WHETHER ARISING IN CONTRACT OR TORT, INCLUDING WITHOUT LIMITATION, ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, LOST PROFITS, ATTORNEY FEES, EXPENSES, OR ANY OTHER DAMAGES ARISING OUT OF, OR IN CONNECTION WITH, ANY CONTENT (OR ANY INFORMATION CONTAINED THEREIN) OR SERVICE PROVIDED TO THE USER OR ANY THIRD PARTY, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
All content and services accessible through this product belong to third parties and are protected by copyright, patent, trademark and/or other intellectual property rights. Such content and services are provided solely for the User’s personal noncommercial use. User may not use any content or services in a manner that has not been authorized by the content owner or service provider. Without limiting the foregoing, unless expressly authorized by the applicable content owner or service provider, you may not modify, copy, republish, upload, post, transmit, translate, sell, create derivative works, exploit, or distribute in any manner or medium any content or services made available through this product.

Read the following information before viewing 3D television images.
Ambient fluorescent lighting may cause a flickering effect and direct sunlight may adversely affect the operation of your 3D glasses. 1.
DO NOT place your television near open stairwells, balconies or other objects as viewing in 3D images may cause disorientation for some viewers resulting in falls, tripping or walking into objects.
If you experience (1) altered vision; (2) lightheadedness; (3) dizziness; (4) involuntary movements such as eye or muscle twitching; (5) confusion; (6) nausea; (7) loss of awareness; (8) convulsions; (9) cramps; and/or (10) disorientation, immediately stop watching 3D images and consult your doctor.
Parents should regularly monitor their children concerning the above symptoms as children and teenagers may be more likely to experience these symptoms more frequently than adults. Watching 3D television is not recommended for children under the age of 6 as their visual system is not yet fully developed.
Prolonged viewing of 3D images might cause discomfort, dizziness, eye strain, headaches or disorientation. 5.
Some viewers may experience an epileptic seizure or stroke when exposed to certain flashing images or lights contained in certain television pictures or video games. If you or any of your family has a history of epilepsy or stroke, please consult your doctor before viewing 3D images.
DO NOT watch 3D television if you are pregnant, elderly, sleep-deprived, suffering from serious medical conditions, in poor physical condition or under the influence of alcohol.
Sitting too close to the screen for an extended period of time may damage your eyesight. The ideal distance should be at least three times the height of the TV screen and at the viewer's eyes level.
Wearing the 3D glasses for any reason other than viewing 3D television (as general spectacles, sunglasses, protective goggles, etc.) may physically harm you or weaken your eyesight.
If you experience any discomfort while viewing 3D images, stop and do not immediately engage in any potentially hazardous activity such as driving a car until your symptoms have disappeared. If your symptoms persist, do not resume watching 3D images without consulting your doctor.

verbatim or with modifications and/or translated into another language. (Hereinafter, translation is included without limitation in the term "modification".) Each licensee is addressed as "you". Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on what the Program does. 1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change. b) You must cause any work that you distribute or publish, that
This section describes software license used for this product. This product uses some open source software: GPL software: findutils, linux, module-init-tools, mount, mtd,
nettools, sash, sysfsutils, GMP, autofs LGPL software: directfb, glibc MIT: expat Free Type, LibJPEG, Open SSL, Vera Fonts
GNU General Public License (GPL) Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation's software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Lesser General Public License instead.) You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things. To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it. For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights. We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software. Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors' reputations. Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at all. The precise terms and conditions for copying, distribution and modification follow. TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The "Program", below, refers to any such program or work, and a "work based on the Program" means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either
in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License. c) If the modified program normally reads commands
interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program. In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following: a) Accompany it with the complete corresponding machine-
readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, b) Accompany it with a written offer, valid for at least three
years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete

machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, c) Accompany it with the information you received as to
if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. 9. The Free Software Foundation may publish revised and/ or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation. 10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Programs If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms. To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should
the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.) The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code. 4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. 5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it. 6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License. 7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide

have at least the "copyright" line and a pointer to where the full notice is found. one line to give the program's name and an idea of what it does. Copyright (C) yyyy name of author This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. Also add information on how to contact you by electronic and paper mail. If the program is interactive, make it output a short notice like this when it starts in an interactive mode: Gnomovision version 69, Copyright (C) year name of author Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. This is free software, and you are welcome to redistribute it under certain conditions; type `show c' for details. The hypothetical commands `show w' and `show c' should show the appropriate parts of the General Public License. Of course, the commands you use may be called something other than `show w' and `show c'; they could even be mouse-clicks or menu items--whatever suits your program. You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer" for the program, if necessary. Here is a sample; alter the names: Yoyodyne, Inc., hereby disclaims all copyright interest in the program `Gnomovision' (which makes passes at compilers) written by James Hacker. signature of Ty Coon, 1 April 1989 Ty Coon, President of Vice This General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Lesser General Public License instead of this License.
When we speak of free software, we are referring to freedom of use, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish); that you receive source code or can get it if you want it; that you can change the software and use pieces of it in new free programs; and that you are informed that you can do these things. To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask you to surrender these rights. These restrictions translate to certain responsibilities for you if you distribute copies of the library or if you modify it. For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the rights that we gave you. You must make sure that they, too, receive or can get the source code. If you link other code with the library, you must provide complete object files to the recipients, so that they can relink them with the library after making changes to the library and recompiling it. And you must show them these terms so they know their rights. We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, which gives you legal permission to copy, distribute and/or modify the library. To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if the library is modified by someone else and passed on, the recipients should know that what they have is not the original version, so that the original author's reputation will not be affected by problems that might be introduced by others. Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a company cannot effectively restrict the users of a free program by obtaining a restrictive license from a patent holder. Therefore, we insist that any patent license obtained for a version of the library must be consistent with the full freedom of use specified in this license. Most GNU software, including some libraries, is covered by the ordinary GNU General Public License. This license, the GNU Lesser General Public License, applies to certain designated libraries, and is quite different from the ordinary General Public License. We use this license for certain libraries in order to permit linking those libraries into non-free programs. When a program is linked with a library, whether statically or using a shared library, the combination of the two is legally speaking a combined work, a derivative of the original library. The ordinary General Public License therefore permits such linking only if the entire combination fits its criteria of freedom. The Lesser General Public License permits more lax criteria for linking other code with the library. We call this license the "Lesser" General Public License because it does Less to protect the user's freedom than the ordinary General Public License. It also provides other free software developers Less of an advantage over competing non-free programs. These disadvantages are the reason we use the ordinary General Public License for many libraries. However, the Lesser license provides advantages in certain special circumstances. For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library, so that it becomes a de-facto standard. To achieve this, non-free programs must be allowed to use the library. A more frequent case is that a free library does the same job as widely used non- free libraries. In this case, there is little to gain by limiting the free library to free software only, so we use the Lesser General Public License. In other cases, permission to use a particular library in non- free programs enables a greater number of people to use a large body of free software. For example, permission to use the GNU C Library in non-free programs enables many more people to use the whole GNU operating system, as well as its variant, the GNU/Linux operating system. Although the Lesser General Public License is Less protective
If you are interested in obtaining GPL source code used in this product, please contact Funai Electric Europe Sp. z o.o. ul. Inůynierska 1, 67-100, Nowa Sól / Poland.
GNU LESSER GENERAL PUBLIC LICENSE
Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. [This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2, hence the version number 2.1.]
Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public Licenses are intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This license, the Lesser General Public License, applies to some specially designated software packages--typically libraries--of the Free Software Foundation and other authors who decide to use it. You can use it too, but we suggest you first think carefully about whether this license or the ordinary General Public License is the better strategy to use in any particular case, based on the explanations below.

of the users' freedom, it does ensure that the user of a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified version of the Library. The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference between a "work based on the library" and a "work that uses the library". The former contains code derived from the library, whereas the latter must be combined with the library in order to run.
the application. Therefore, Subsection 2d requires that any application-supplied function or table used by this function must be optional: if the application does not supply it, the square root function must still compute square roots.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Library, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Library, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Library. In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3. You may opt to apply the terms of the ordinary GNU
GNU LESSER GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION
AND MODIFICATION 0. This License Agreement applies to any software library or other program which contains a notice placed by the copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public License (also called "this License"). Each licensee is addressed as "you". A "library" means a collection of software functions and/or data prepared so as to be conveniently linked with application programs (which use some of those functions and data) to form executables. The "Library", below, refers to any such software library or work which has been distributed under these terms. A "work based on the Library" means either the Library or any derivative work under copyright law: that is to say, a work containing the Library or a portion of it, either verbatim or with modifications and/or translated straightforwardly into another language. (Hereinafter, translation is included without limitation in the term "modification".) "Source code" for a work means the preferred form of the work for making modifications to it. For a library, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the library. Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running a program using the Library is not restricted, and output from such a program is covered only if its contents constitute a work based on the Library (independent of the use of the Library in a tool for writing it). Whether that is true depends on what the Library does and what the program that uses the Library does. 1. You may copy and distribute verbatim copies of the Library's
General Public License instead of this License to a given copy of the Library. To do this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU General Public License, version 2, instead of to this License. (If a newer version than version 2 of the ordinary GNU General Public License has appeared, then you can specify that version instead if you wish.) Do not make any other change in these notices. Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License applies to all subsequent copies and derivative works made from that copy. This option is useful when you wish to copy part of the code of the Library into a program that is not a library. 4. You may copy and distribute the Library (or a portion or
derivative of it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange. If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place satisfies the requirement to distribute the source code, even though third parties are not compelled to copy the source along with the object code. 5. A program that contains no derivative of any portion of the
complete source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and distribute a copy of this License along with the Library. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2. You may modify your copy or copies of the Library or any
Library, but is designed to work with the Library by being compiled or linked with it, is called a "work that uses the Library". Such a work, in isolation, is not a derivative work of the Library, and therefore falls outside the scope of this License. However, linking a "work that uses the Library" with the Library creates an executable that is a derivative of the Library (because it contains portions of the Library), rather than a "work that uses the library". The executable is therefore covered by this License. Section 6 states terms for distribution of such executables. When a "work that uses the Library" uses material from a header file that is part of the Library, the object code for the work may be a derivative work of the Library even though the source code is not. Whether this is true is especially significant if the work can be linked without the Library, or if the work is itself a library. The threshold for this to be true is not precisely defined by law. If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and small inline functions (ten lines or less in length), then the use of the object file is unrestricted, regardless of whether it is legally a
portion of it, thus forming a work based on the Library, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: a) The modified work must itself be a software library. b) You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change. c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License. d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that uses the facility, other than as an argument passed when the facility is invoked, then you must make a good faith effort to ensure that, in the event an application does not supply such function or table, the facility still operates, and performs whatever part of its purpose remains meaningful. (For example, a function in a library to compute square roots has a purpose that is entirely well-defined independent of

derivative work. (Executables containing this object code plus portions of the Library will still fall under Section 6.) Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of Section 6. Any executables containing that work also fall under Section 6, whether or not they are linked directly with the Library itself. 6. As an exception to the Sections above, you may also
the Sections above. b) Give prominent notice with the combined library of the fact that part of it is a work based on the Library, and explaining where to find the accompanying uncombined form of the same work. 8. You may not copy, modify, sublicense, link with, or distribute
the Library except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense, link with, or distribute the Library is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. 9. You are not required to accept this License, since you have
combine or link a "work that uses the Library" with the Library to produce a work containing portions of the Library, and distribute that work under terms of your choice, provided that the terms permit modification of the work for the customer's own use and reverse engineering for debugging such modifications. You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are covered by this License. You must supply a copy of this License. If the work during execution displays copyright notices, you must include the copyright notice for the Library among them, as well as a reference directing the user to the copy of this License. Also, you must do one of these things:
not signed it. However, nothing else grants you permission to modify or distribute the Library or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Library (or any work based on the Library), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Library or works based on it. 10. Each time you redistribute the Library (or any work based
a) Accompany the work with the complete corresponding machine-readable source code for the Library including whatever changes were used in the work (which must be distributed under Sections 1 and 2 above); and, if the work is an executable linked with the Library, with the complete machine-readable "work that uses the Library", as object code and/or source code, so that the user can modify the Library and then relink to produce a modified executable containing the modified Library. (It is understood that the user who changes the contents of definitions files in the Library will not necessarily be able to recompile the application to use the modified definitions.) b) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (1) uses at run time a copy of the library already present on the user's computer system, rather than copying library functions into the executable, and (2) will operate properly with a modified version of the library, if the user installs one, as long as the modified version is interface-compatible with the version that the work was made with. c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified in Subsection 6a, above, for a charge no more than the cost of performing this distribution. d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above specified materials from the same place. e) Verify that the user has already received a copy of these materials or that you have already sent this user a copy. For an executable, the required form of the "work that uses the Library" must include any data and utility programs needed for reproducing the executable from it. However, as a special exception, the materials to be distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany the operating system. Such a contradiction means you cannot use both them and the Library together in an executable that you distribute. 7. You may place library facilities that are a work based on
on the Library), the recipient automatically receives a license from the original licensor to copy, distribute, link with or modify the Library subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties with this License. 11. If, as a consequence of a court judgment or allegation of
patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Library at all. For example, if a patent license would not permit royalty-free redistribution of the Library by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Library. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply, and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 12. If the distribution and/or use of the Library is restricted
in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Library under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. 13. The Free Software Foundation may publish revised and/
the Library side-by-side in a single library together with other library facilities not covered by this License, and distribute such a combined library, provided that the separate distribution of the work based on the Library and of the other library facilities is otherwise permitted, and provided that you do these two things: a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other library facilities. This must be distributed under the terms of
or new versions of the Lesser General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns.

Each version is given a distinguishing version number. If the Library specifies a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Library does not specify a license version number, you may choose any version ever published by the Free Software Foundation. 14. If you wish to incorporate parts of the Library into
Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Also add information on how to contact you by electronic and paper mail. You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer" for the library, if necessary. Here is a sample; alter the names:
other free programs whose distribution conditions are incompatible with these, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally.
Yoyodyne, Inc., hereby disclaims all copyright interest in the library `Frob' (a library for tweaking knobs) written by James Random Hacker. , 1 April 1990 Ty Coon, President of Vice That's all there is to it!
If you are interested in obtaining LGPL source code used in this product, please contact Funai Electric Europe Sp. z o.o. ul. Inůynierska 1, 67-100, Nowa Sól / Poland.
NO WARRANTY 15. BECAUSE THE LIBRARY IS LICENSED FREE OF
CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE
• expat Copyright © 1998, 1999, 2000 Thai Open Source Software Center Ltd and Clark Cooper Copyright © 2001, 2002, 2003, 2004, 2005, 2006 Expat maintainers. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Libraries If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it free software that everyone can redistribute and change. You can do so by permitting redistribution under these terms (or, alternatively, under the terms of the ordinary General Public License). To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found.
Portions of this software are copyright (c) 2001, 2002, 2003, 2004, 2006 The FreeType Project (www.freetype.org). All rights reserved.
This software is based in part on the work of the Independent JPEG Group.
LICENSE ISSUES ========== The OpenSSL toolkit stays under a dual license, i.e. both the conditions of the OpenSSL License and the original SSLeay license apply to the toolkit. See below for the actual license texts. Actually both licenses are BSD-style Open Source licenses. In case of any license issues related to OpenSSL please contact openssl-core@openssl.org.

=================================== /* *
If this package is used in a product, Eric Young should be given attribution as the author of the parts of the library used. * * *
Copyright (c) 1998-2008 The OpenSSL Project. All rights reserved. *
This can be in the form of a textual message at program startup or in documentation (online or textual) provided with the package. * * *
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * * *
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * *
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. *
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ==================================== * * *
The licence and distribution terms for any publically available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and put under another distribution licence * [including the GNU Public Licence.] */
This product includes cryptographic software written by Eric Young (eay@cryptsoft.com). This product includes software written by Tim Hudson (tjh@cryptsoft.com). * */ Original SSLeay License /* *
Copyright Copyright (c) 2003 by Bitstream, Inc. All Rights Reserved. Bitstream Vera is a trademark of Bitstream, Inc. Permission is hereby granted, free of charge, to any person obtaining a copy of the fonts accompanying this license (“Fonts”) and associated documentation files (the “Font Software”), to reproduce and distribute the Font Software, including without limitation the rights to use, copy, merge, publish, distribute, and/ or sell copies of the Font Software, and to permit persons to whom the Font Software is furnished to do so, subject to the following conditions: The above copyright and trademark notices and this permission notice shall be included in all copies of one or more of the Font Software typefaces. The Font Software may be modified, altered, or added to, and in particular the designs of glyphs or characters in the Fonts may be modified and additional glyphs or characters may be added to the Fonts, only if the fonts are renamed to names not containing either the words “Bitstream” or the word “Vera”. This License becomes null and void to the extent applicable to Fonts or Font Software that has been modified and is distributed under the “Bitstream Vera” names.
Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) All rights reserved. * *
This package is an SSL implementation written by Eric Young (eay@cryptsoft.com). * *
The implementation was written so as to conform with Netscapes SSL. *
This library is free for commercial and non-commercial use as long as the following conditions are aheared to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code. The SSL documentation included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson (tjh@cryptsoft.com). * *
Copyright remains Eric Young's, and as such any Copyright notices in the code are not to be removed.
* * * · Vera Fonts

The Font Software may be sold as part of a larger software package but no copy of one or more of the Font Software typefaces may be sold by itself. THE FONT SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF COPYRIGHT, PATENT, TRADEMARK, OR OTHER RIGHT. IN NO EVENT SHALL BITSTREAM OR THE GNOME FOUNDATION BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, INCLUDING ANY GENERAL, SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF THE USE OR INABILITY TO USE THE FONT SOFTWARE OR FROM OTHER DEALINGS IN THE FONT SOFTWARE. Except as contained in this notice, the names of Gnome, the Gnome Foundation, and Bitstream Inc., shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Font Software without prior written authorization from the Gnome Foundation or Bitstream Inc., respectively. For further information, contact: fonts at gnome dot org.

DECLARATION OF CONFORMITY This product complies with the requirement of the related directives. We: FUNAI ELECTRIC EUROPE Sp. z o.o. ul. Inůynierska 1, 67-100, Nowa Sól, Poland
B4-M501 B4-M502 Trade Name: Funai is in compliance with the related regulations.
Printed in P.R.C 1VMN31713 / ECB91_93_95ED ★★★★★
Web Site: http://www.funai.eu © 2011 FUNAI ELECTRIC All rights reserved.
* 1 V M N 3 1 7 1 3 *
Pages referenced in this manual — manufacturer, support and downloads.
What the fault codes shown on the display mean and how to clear them.
| Code | Meaning | Fix | |
|---|---|---|---|
| OR3D | by pressing [DISPLAY] during | p.26 |
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.