Instruction/ maintenance manual of the product 1902G Blackberry
Go to page of 28
RIM OEM Radio Modem for GSM/ GPRS W ireless Netw orks RIM 1902G™ and RIM 1802G™ Getting Star ted Guid e Ve r s i o n 1 . 2.
RIM OEM Radio Modem fo r GSM/GPRS W ireless Netw orks V ersion 1.2 Getting Started Guid e Last revised: 08 August 2003 P art number: PDF-05732-004 MA T -06067-001 The information in this document is RIM confid ential and is for intern al distributi on only .
Getting Started Gui d e 3 Contents About this guide .............. ........ .............................................. .......................... 5 Related resources ...... ............... .............. .... ....... ............... ..............
4 RIM OEM Radio Modem for GSM/GPRS Wireless Networks.
About this guide This guide provi des information on the following topics: • setting up the Interface and T est Board • connecting the radio modem to your computer This guide is intended to help y ou start testing the RIM 1902G™ or RIM 1802G™ radio modems.
About this guide 6 RIM OEM Radio Modem for GSM/GPRS Wireless Networks.
Chapter 1 S etting up the In ter face and T est Board This guide provi des information on the following topics: • Setup ove rview • Connecting the SIM card • Connecting the radio modem • Conne.
Chapter 1: Setting up the Interface and T est Board 8 RIM OEM Radio Modem for GSM/GPRS Wireless Networks Setu p o v e rview T o set up the Interface and T est Board, perform these tasks: 1.
Connecting the SIM card Getting Started Gui d e 9 C onnecting the SIM card The 6-pin flat SIM interface ca ble carries the data and pow er between the Interface and T est Board SIM slot and the radio modem.
Chapter 1: Setting up the Interface and T est Board 10 RIM OEM Radio Modem for GSM/GPRS Wireless Netw orks C onnecting the radio modem The 22-pin flat interface cable supplies clean, regu lated pow er to the radio and carrie s most of the data and all of the voice between the Interface and T est Board and the radio modem.
Inserting the SIM card into the SIM card holder Getting Started Gui d e 11 Inser ting the SIM card int o the SIM card holder 1. If you are using t he on-board SIM configuration, turn the test board ov er to reveal the cut-out that provides access to the SIM card holder on the unde rside of the radio m odem.
Chapter 1: Setting up the Interface and T est Board 12 RIM OEM Radio Modem for GSM/GPRS Wireless Netw orks 2. Slide the SIM card holder in the direction o f th e arrow to unlock it, and then lift the cover open. 3. Slide the SIM card into the cover with the cond uctiv e side facing the leads on the board.
Chapter 2 C onnec ting the radio modem to a c omputer T o enable the radio modem to communicate wi th your co mpu ter, yo u m ust add th e r adi o modem to your computer , and add a dial-up network connection for the modem.
Chapter 2: C onnecting the radio modem to a computer 14 RIM OEM Radio Modem for GSM/GPRS Wireless Netw orks Required inf ormation Before you start, determine the access point name (APN) of your netw ork.
Connecting with Window s 2000 Getting Started Gui d e 15 5. Select the Don't detect my modem option. Click Next . The model selection window appears, as shown in the followin g diagram. Install New Modem window – m odel selection 6. In the Models list, selec t Standard 33600 bps modem .
Chapter 2: C onnecting the radio modem to a computer 16 RIM OEM Radio Modem for GSM/GPRS Wireless Netw orks 9. On the Modems tab, select the modem that y ou added and click Properties . The Properties window appears. Modem Propert ies window – G eneral tab 10.
Connecting with Window s 2000 Getting Started Gui d e 17 12. In the Extra initialization commands field, type: at+cgdcont=1,"IP"," apn_name " where apn_name is the access point name (APN) for your network 13. Click OK . The Phone and Modem Options window appears.
Chapter 2: C onnecting the radio modem to a computer 18 RIM OEM Radio Modem for GSM/GPRS Wireless Netw orks 13. Click Finish . The new connection appears in the Ne twork and Dial-up Connections window . 14. Right-click the new connection icon and click Properties .
Connecting with Window s 2000 Getting Started Gui d e 19 18. Click OK . The Properties window appears. 19. Click the General tab and click Configure . The Modem Configuration window appears. 20. From the Maximum speed (bps) drop-down menu, select 115200 .
Chapter 2: C onnecting the radio modem to a computer 20 RIM OEM Radio Modem for GSM/GPRS Wireless Netw orks Change registry settings P erform the following steps so that the mo dem disconnects and re connects correc tly . 1. In a command prompt, type: regedit The Registry Editor appears.
Connecting with Window s 2000 Getting Started Gui d e 21 3. Double-click on the 1 val u e . 4. In the Value data field, type: +++ 5. Click OK . 6. On the Edit menu, click New > String Value . A new entry appears under the Name column in the Registry Editor window .
Chapter 2: C onnecting the radio modem to a computer 22 RIM OEM Radio Modem for GSM/GPRS Wireless Netw orks C onnecting with Windo ws 95/98 Y ou must perform the following tasks to co nnect the radio modem to your computer: •a d d t h e m o d e m • add a dial-up connection Add a modem 1.
Connecting with W indows 95/98 Getting Started Gui d e 23 Add a c onnection 1. On the Start menu, cl ick Programs > Accessor ies > Commu nications > Dial-Up Networking . 2. Double-click the Make New Connection icon. 3. T ype a descriptive na me for the connection.
Chapter 2: C onnecting the radio modem to a computer 24 RIM OEM Radio Modem for GSM/GPRS Wireless Netw orks Modem Properties window – Connection tab 9. Set the fields to the following values: •F r o m t h e Data bits dro p-down li st, select 8 . •F r o m t h e Parity drop-down list, select None .
Connecting with W indows 95/98 Getting Started Gui d e 25 13. Click OK . The Make New Connec tion window appears. 14. Click Next . 15. In the Telephone number field, type *99# . Click Next . 16. Click Finish . The new connection appears in the Netw ork and Dial-up Connections window .
Chapter 2: C onnecting the radio modem to a computer 26 RIM OEM Radio Modem for GSM/GPRS Wireless Netw orks Setting up HyperT erminal Y ou can use HyperT erminal to send A T c ommands to the OEM radio modem. 1. On the Windows Start menu, click Pr ograms > Accessorie s > Communications > HyperTerminal .
.
© 2002 Research In Motion Limited Published in Canada.
An important point after buying a device Blackberry 1902G (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Blackberry 1902G yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Blackberry 1902G - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Blackberry 1902G you will learn all the available features of the product, as well as information on its operation. The information that you get Blackberry 1902G will certainly help you make a decision on the purchase.
If you already are a holder of Blackberry 1902G, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Blackberry 1902G.
However, one of the most important roles played by the user manual is to help in solving problems with Blackberry 1902G. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Blackberry 1902G along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
