Instruction/ maintenance manual of the product LB9017A-R3 Black Box
Go to page of 24
Express Ethernet Switches: LB9017A-R3 September, 2004 CUSTOMER SUPPORT INFORMATION Order toll-free in the U.S. 24 hours, 7 A.M. Monday to midnight Friday : 877- 877-BBO X FREE technical support, 24 ho.
Express Ethern et Switch: LB 9017A-R 3 1 FEDERAL COMMUNICAT IONS COMMISSION AND CANADIAN DEPARTMENT OF COMMUNICATIO NS RADIO FREQUENCY INTERF ERENCE STATEMENT This equipment generates, uses and can ra.
Express Ethern et Switch: LB 9017A-R 3 2 15. En caso de existir, una an tena ext erna deberá ser l ocalizada lejos de las lineas de energia. 16. El cable de corriente deb erá ser desconectado del cu ando el equipo no sea usado po r un largo p eriodo de tiempo.
Express Ethern et Switch: LB 9017A-R 3 3 About T his Manual Preface This manual describes ho w to install and use the 16 P orts Web-based Smart Ethernet Switch. The TX port s of the switch introduced here auto-negotiates th e presence of 10/100Mbps and full/half-duplex mode and auto-MDIX.
Express Ethern et Switch: LB 9017A-R 3 4 T able of Contents About This Manu al...................................................................................................................................................... 3 Preface ............
Express Ethern et Switch: LB 9017A-R 3 5 Product Ov erview Front View Figure 1: 16 Ports Web-base d Smart Ethernet Switch Package Contents When you unpack the produ ct package, you shall find these items listed belo w.
Express Ethern et Switch: LB 9017A-R 3 6 Product Features ♦ P ROVIDES 16 × 10/100M BPS PORTS USING RJ-45 CON NECTORS ♦ A N OPTIONAL SINGLE - PORT FIBER MO DULE ALLOWS : - 100B ASE FX MULTI - MODE.
Express Ethern et Switch: LB 9017A-R 3 7 Front Panel Display The LED indicat ors on the f ront panel pr ovide you wit h instant fee dback on each port status, and help y ou monitor and troubleshoot the switch. Figure 3: Fro nt Panel LEDs Power This LED comes on whe n the switch is properly connected to po wer and turned on.
Express Ethern et Switch: LB 9017A-R 3 8 Flashing T ransmittin g or receivin g data ACT stands for ACTIVITY ACT Off Neither transmitting nor receiving data On A valid network connection LNK stands for.
Express Ethern et Switch: LB 9017A-R 3 9 Installation and Placement Instructions Mounted to 19-inch standard rac k Locate the accessories supplied in the product package. Use the rackmount brackets and screws to in stall the switch into any E IA 19” stand ard rack.
Express Ethern et Switch: LB 9017A-R 3 10 Optional Fiber Module Installation Consult the following illu strations before installation. Step 1: Make sure the power is switched o ff. The module is not hot-swappable. L It may cause electric shoc k or any possible damage to the swi tch if the power i s not switched off .
Express Ethern et Switch: LB 9017A-R 3 User’s Manual 11 Connecting to Power Locate the supplied AC powe r cord. Step 1: Connect the AC power cord to the receptacle at the back of the switch. Step 2: Attach the plug into a standard AC ou tlet with a voltage range from 100~240Vac.
Express Ethern et Switch: LB 9017A-R 3 User’s Manual 12 Network Segment ation The maxim um segment di stance between a node an d a direc tly connecte d switch po rt on a 1 00BaseFX ne twork is 75km usin g 10/125 (or 9/125) µm singl e-mode fibe r optic ca ble.
Express Ethern et Switch: LB 9017A-R 3 User’s Manual 13 Switch Configur atio n Setting up Console Port Connection (Web-Based Browser Interface) The Ethernet Switch provides a b rowser interf ace that lets you conf igure and manage the Ethernet Switch from a Web browser (such as Microsoft Internet Explorer or Netscape Navigator) remotely.
Express Ethern et Switch: LB 9017A-R 3 User’s Manual 14 Main Menu System Change The System Change parameters can be displayed by clicking the System Change button in the left sub-menu. z Switch Name: Type a switch name and replace the current switch nam e with a new one.
Express Ethern et Switch: LB 9017A-R 3 User’s Manual 15 z Password: Enter a user-defined password and change the f actory default password. <Note> ( Only “ a-z “, “A-Z”, “0-9”, “under line” & “Space” can be acceptable, totally can not exceed 16 characters ).
Express Ethern et Switch: LB 9017A-R 3 User’s Manual 16 Port z Refresh: Click the Refresh On or Refresh Off button to or not to refr esh back to the last saved settings of the ports. <Note> It is recommended to change the Refresh On button to Refresh Off while you change the settings of the ports.
Express Ethern et Switch: LB 9017A-R 3 User’s Manual 17 VLAN z VLAN: Click and choose the ports to be added into the VLAN groups. z Apply: Click the Apply button and apply the new settings of the VLAN groups.
Express Ethern et Switch: LB 9017A-R 3 User’s Manual 18 Trunking 16 Ports Ethernet Switch: z Disable: Click and choose the Disable to disable the Trunking Group 1 or Trunking Group 2. z Trunking Group 1: Click and choose the Port 1, 2 to be added into the Trunking Group 1.
Express Ethern et Switch: LB 9017A-R 3 User’s Manual 19 Save Configuration z Click Save Configuration . z Click the Ok or Cancel button to or not to sa ve the configurations. <Note> The Cancel button will discard any data you ha ve changed since the last "Save" operation.
Express Ethern et Switch: LB 9017A-R 3 User’s Manual 20 Load Default z Click Load Default . z Click the Ok or Cancel button to or not to load the default settings. < Note > Once the Ok button is selected, all last saved Port , VLAN , and Trunking setting will revert back to the default settings.
Express Ethern et Switch: LB 9017A-R 3 User’s Manual 21 Physical Specifications 16 Ports Web-based S mart Ethernet Switch Dimensions 17.3 x 8.2 x 1.74 in. ( W440 × D207 × H44 mm ) 19” rack mount size, 1U high Weight Approximately 6.2 pounds ( 2.
Express Ethern et Switch: LB 9017A-R 3 User’s Manual 22 Connector Pinouts Pin arrangem ent of RJ -45 co nnectors: Figure 6: RJ-45 Connector and C able Pins The following table lists the pinout of 10/100BaseT/TX ports.
Express Ethern et Switch 23 Ordering Infor mat ion 16 Fixed Ports Single-Port Module Cable Connector Distance Speed Cable (/125µm) Connector Distance 3 100BaseFX MMF (50µm or 62.5µm) SC 2km 100BaseFX MMF (50µm or 62.5µm) ST 2km 100BaseFX MMF (50µm or 62.
An important point after buying a device Black Box LB9017A-R3 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Black Box LB9017A-R3 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Black Box LB9017A-R3 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Black Box LB9017A-R3 you will learn all the available features of the product, as well as information on its operation. The information that you get Black Box LB9017A-R3 will certainly help you make a decision on the purchase.
If you already are a holder of Black Box LB9017A-R3, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Black Box LB9017A-R3.
However, one of the most important roles played by the user manual is to help in solving problems with Black Box LB9017A-R3. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Black Box LB9017A-R3 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
