Instruction/ maintenance manual of the product LB510A-R2 Black Box
Go to page of 40
LB510A-R2 10BASE -T/100B ASE-TX G .SHDSL T wo-Wire Extend er/NTU Extend corporate LAN-to-W AN comm unications at higher speeds or at a longer distance.
724-746-5500 | blackbox.com Page 2 Black Box G. SH DSL.bis EFM CPE T A BLE OF CONTENT S 1. GENERAL INFORMATION ............... ....................... ................. .................. 9 1.1 Features .............. ............................ ....
724-746-5500 | blackbox.com Page 3 Table of Contents 5.1 Establis hing a Rem o te Console Sessio n .............. ....................... ..... 2 9 5.1.1 How to Connect ............. ....................... ................. ................ 29 5.1.2 How to Disconn ect .
724-746-5500 | blackbox.com Page 4 Black Box G. SH DSL.bis EFM CPE C.1 Line Port ............. ...................... ................. ....................... ................ 39 C.1.1 RJ-45................ ................ ....................... ..
724-746-5500 | blackbox.com Page 5 RADIO FREQUENCY INTERFERENCE STATEMENTS RADIO FREQUENCY INTERFERENCE ST A TEMENTS FEDERAL COMMUNICA TIONS COMMISSION AND INDUSTRY CANADA RADIO FREQUENCY INTERFERENCE.
724-746-5500 | blackbox.com Page 6 Black Box G. SH DSL.bis EFM CPE INSTRUCCIONES DE SEGURI DAD (Normas O ficial es Mexica nas Electrical Safe ty St atement) 4. T odas las inst rucciones de s eguridad y opera c ión deberán se r leídas antes d e que el apara t o el éctri co se a ope rado.
724-746-5500 | blackbox.com Page 7 INSTRUCCIONES DE SEGURIDAD 17.El equi po eléctrico debe ser limpiado únic amente de acue rdo a las reco menda - ciones del fabri cante. 18.En cas o de existir , un a antena e xterna deberá ser loca lizada lejos d e las lineas de energ ia.
724-746-5500 | blackbox.com Page 8 Black Box G. SH DSL.bis EFM CPE SAFETY WHEN WORKING WITH ELECTRICITY • This de vice conta ins no user servic eable p art s. Thi s device ca n only be rep aired by qual ified serv ice personne l. • Do not op en the devic e when the pow er cord i s connected.
724-746-5500 | blackbox.com Page 9 In accord ance with th e requirem ent s of council directive 2002/96/EC o n Was te of Elec trical an d Electronic Equipment (WEEE), ensure that at end-of-life you s ep arate th is prod uct from othe r waste and scrap and de liver to the WEEE col - lection syste m in your country fo r recycling.
724-746-5500 | blackbox.com Page 10 Black Box G. SH DSL.bis EFM CPE 1. GENERAL INFORMA TION Thank you for your purchas e of t his Black Box product. This product has been thor - oughly inspected and tested and is w arranted fo r one year for p arts and labo r .
724-746-5500 | blackbox.com Page 11 Figure 1. LB510A-R2 1.3 POWER INP UT CONNECTOR The LB510A-R 2 comes with an AC or DC pow er supply . (See Appendix A.7 on page 36 .) The powe r connectio n t o the CPE is a 2.5 mm barrel rec eptacle with the center con - ducto r posi tive (see f igur e 2).
724-746-5500 | blackbox.com Page 12 Black Box G. SH DSL.bis EFM CPE 1.3.2 Exter nal 48 VDC power supply Input: • Rated voltage: 36–60 VD C • Rated current: 0.
724-746-5500 | blackbox.com Page 13 Configurat ion hardware (D IP-switch)-co nfiguration mode. In DIP-switc h-configu ration mode the device will rea d the DIP-switc h settings during sy stem st artup and config ure itself acco rding t o the swit ch set ting s.
724-746-5500 | blackbox.com Page 14 Black Box G. SH DSL.bis EFM CPE 2.3 CONFIGURING THE DIP S WITCHES The LB 510A-R2 is eq uipped with thre e sets of DIP s witches, wh ich you can use to configu re the modem for a br oad range of appl ications. This s ection de scribes switch locatio ns and disc usses t he configura tion options available.
724-746-5500 | blackbox.com Page 15 Configurat ion The three s e ts of DIP switche s on the underside of the LB510A-R2 are ref erred to as S1 , S3 and S4 . F or ba sic c onfiguratio n , use DIP switch S1 . For testing the LB510A-R2, use DIP sw itch S3 .
724-746-5500 | blackbox.com Page 16 Black Box G. SH DSL.bis EFM CPE T able 3: LB510A-R2 S 3 DIP-Switch function s (test mo des and p atterns) 2.5.1 Switches S4-2 through S4-8 define the DSL line rate .
724-746-5500 | blackbox.com Page 17 OFF OFF OF F ON OFF OFF ON 704 OFF OF F OFF ON OFF ON OFF 768 OFF OF F OFF ON OFF ON ON 832 OFF OF F OFF ON ON OFF OFF 896 OFF OF F OFF ON ON OFF ON 960 OFF OF F OF.
724-746-5500 | blackbox.com Page 18 Black Box G. SH DSL.bis EFM CPE OFF ON OFF ON OF F ON OFF 2816 OFF ON OFF ON OF F ON ON 2880 OFF ON OFF ON ON OF F OFF 2944 OFF ON OFF ON ON OF F ON 3008 OFF ON OFF.
724-746-5500 | blackbox.com Page 19 2.6 ETHERNET MAN AGEMENT PORT The LB510A-R 2 of fers a 10/100 Ethernet port for configu ration and manageme nt via T elnet ses si on s. Be ca use the Ethe rnet port is configured as MDI, a cro ss ov er Eth ern et cable is required w hen conn ecting directly from a local PC or laptop.
724-746-5500 | blackbox.com Page 20 Black Box G. SH DSL.bis EFM CPE • DSL Sync S tate: Out of Sync, Acqu iring Sync, In Sy nc, or Los ing Sync. NOTE: DSL Link State vs.
724-746-5500 | blackbox.com Page 21 • dsl show errcntr hel p: Lists a ll the comman ds that st art with dsl show er rcntr that the con so le recogn izes.
724-746-5500 | blackbox.com Page 22 Black Box G. SH DSL.bis EFM CPE 2.6.5 DSL Status Command The dsl show st atus comma nd sh ows the follo w ing DS L st a t us i nfo rma tion : link st at e, sync st ate, link spe ed, error coun ters, line conditi on, noise margin, and test mode st a - tus.
724-746-5500 | blackbox.com Page 23 Safety When Working With Elect ri city losw: 0 LB301A-R2> system show status configuration mode: software dsl test mode: loopback: off pattern: off errors: 0 dsl.
724-746-5500 | blackbox.com Page 24 Black Box G. SH DSL.bis EFM CPE 3. INST A LLATION Once the LB5 10A-R2 is properly co nfi gure d, i t is read y to c on nec t to t he D SL i nte rfac e and t o the pow er source . This secti on expla ins how to ma ke these connections.
724-746-5500 | blackbox.com Page 25 Insta llati on The RJ-45 DSL co nnector on th e LB51 0A-R2’s twisted p air interfa ce is pola rity inse n - sitive and is wired f or a two-wi re interfac e. 3.2 CONNECTING THE ETHERNE T INTERFACE This se ction describe s how to conn ect the Ethernet po rts to you r network equipme nt.
724-746-5500 | blackbox.com Page 26 Black Box G. SH DSL.bis EFM CPE 3.3.2 DC Pow er The 36-60 VDC DC to DC adapt er is supp lied wi th the DC ve rsion of th e LB510A-R2. Th e blac k and red leads pl ug into a DC sou rce (nom inal 48VD C) and the ba rrel power connec tor plugs into the barrel po wer supply jack on the LB510A-R2.
724-746-5500 | blackbox.com Page 27 Ope ratio n Figure 6. LB510A -R2 front p anel 4.2.1 Po w er (Green) The P ower LED glow s soli d during n ormal op eration. At startup, du ring the PO ST , the L ED bl ink s on ce ev ery s ec ond . If th e PO ST fai ls , th e u ni t do es no t enter normal ope ra - tion, an d the LED blink s once ever y 0.
724-746-5500 | blackbox.com Page 28 Black Box G. SH DSL.bis EFM CPE 4.3 T ES T MODES The LB510 A-R2 offers test modes in the form of lo opbacks , prbs p attern generators, and com binations o f both. This sec tion dis c usses how the test modes wo rk.
724-746-5500 | blackbox.com Page 29 Remote consol e operation Figu re 9. Remote digital loopback diagram The R DL cau ses the remot u nit to loop the data received from the DSL line back tow the DSL line. 4.3.2 Patterns The LB 510A-R2 can genera te and detect 51 1 pa tterns.
724-746-5500 | blackbox.com Page 30 Black Box G. SH DSL.bis EFM CPE Figur e 10. Remote control session diagram 5.1 EST AB LISHING A REMOTE CONSOLE SESSIO N 5.1.1 Ho w to C onnect The f ollowing s teps are to est ablish a co nnection to the remote L B510A-R2 (far-en d) via Rem ote Console Sess ion (RCS): 1.
724-746-5500 | blackbox.com Page 31 Remote consol e operation NOTE: The p asswords for a lo cal console session of the LB510A-R 2 (nea r-en d) and the remot e co ns ole sessi on of the LB51 0A-R2 (far-end) s hou ld be di ffere nt fo r the p ur - pos e of se curity .
724-746-5500 | blackbox.com Page 32 Black Box G. SH DSL.bis EFM CPE 5.1.2 Ho w to D isconnect The remo te console ses sion ends und er any of the foll owing conditi ons: • The user enters the c ommand l ogou t • A timeout peri od of 5 mi nute s e lap ses since the us er has en tered a comman d to th e con s ole.
724-746-5500 | blackbox.com Page 33 Software Upgrade Figure 12. Remote control session with LAL diagram • dsl set lo opback lal: do not issue this comm and over the RCS to the far-end LB510A-R 2. i f the far-e nd g oes into Local Ana lo g Lo opb ac k (LAL ), th e near-end and far-en d LB510A-R2 NTU’ s can no l onger commu nicate over the RCS.
724-746-5500 | blackbox.com Page 34 Black Box G. SH DSL.bis EFM CPE 7. RESET CO NFIGURATION TO FACTORY DEFAULTS The conf iguration can be r eset to factory default s using DIP sw itch S1 . A f a ctory reset allow s a user t o recover from a forgo tten password .
724-746-5500 | blackbox.com Page 35 Reset configurat ion to f actory defaults A. SPECIFICATIONS A.1 CLOCKING MODES Internal, external or recei v e recovered A.2 DT E RATE All 64k steps from 6 4 to 5696 k bps A.3 ETHERNET INTERFACE • Four RJ-45 • 10/1 00base-t • IEEE802 .
724-746-5500 | blackbox.com Page 36 Black Box G. SH DSL.bis EFM CPE The Acti vity LED shows that there is data be ing transferre d over tha t port. During a soft ware up grade pro cedure , if the Activit y LED is on for ex tende d time, a pr oblem with the upgra de has occured and the device shou ld be restarted.
724-746-5500 | blackbox.com Page 37 Reset configurat ion to f actory defaults A.7.2 E XTERNAL 48 VDC POW ER SUPPLY • Inpu t -Rated voltage 36–6 0 VDC -Rated current 0.2 5 A DC • Out put -Rated voltage 5 VD C 5%, 5W -Rated current 1 A D C -6-inch cable terminate d with 2.
724-746-5500 | blackbox.com Page 38 Black Box G. SH DSL.bis EFM CPE A.13 T EMPERATURE RANGE 32–122°F (0–50°C) A.14 HUMIDITY 5–95 % non-con densing A.15 AL TITUDE 0–15,00 0 feet (0–4,600 m eters) A.16 DIMENSIONS 6.22 W x 1.25 H x 4.75 D in.
724-746-5500 | blackbox.com Page 39 Reset configurat ion to f actory defaults C. INTERF ACE PINOUTS C.1 LINE PORT C.1.1 RJ-45 • Pin 4: T ip • Pin 5: Ring • Pins 1, 2, 3, 6, 7, 8: n o connec tion C.2 ETHERNET PORT C.2.1 RJ-45 SOCKET 10/100B ASE -T • Pin 1: TX+ • Pin 2: TX- • Pin 3: RX+ • Pin 6: RX- NOTE: Pins not listed ar e not use d.
724-746-5500 | blackbox.com Reset configurat ion to f actory defaults.
An important point after buying a device Black Box LB510A-R2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Black Box LB510A-R2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Black Box LB510A-R2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Black Box LB510A-R2 you will learn all the available features of the product, as well as information on its operation. The information that you get Black Box LB510A-R2 will certainly help you make a decision on the purchase.
If you already are a holder of Black Box LB510A-R2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Black Box LB510A-R2.
However, one of the most important roles played by the user manual is to help in solving problems with Black Box LB510A-R2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Black Box LB510A-R2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
