Instruction/ maintenance manual of the product X500 Series Black & Decker
Go to page of 12
® SA VE THIS USE AND CARE BOOK LEASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO CONSERVER CE GUIDE D’ENTRETIEN ET D’UTILISA TION Séries X500-X600 Series SurgeXpress ™ Iron (English) Plancha (Espãnol) Fer (Français) Black & Decker , S.A. de C.
IMPORT ANT SAFEGUARDS When using your iron, basic safety precautions should always be fol- lowed, including the following: READ ALL INSTRUCTIONS. ■ Use iron only for its intended use. ■ T o protect against a risk of electric shock, do not immerse the iron in water or other liquid.
dropped or damaged. T o avoid the risk of electric shock, do not disas- semble the iron; instead, take it to an authorized service center for examination and repair . Incorrect reassembly can cause a risk of elec- tric shock when the iron is used. ■ Close supervision is necessary for any appliance being used by or near children.
SA VE THESE INSTRUCTIONS T AMPER-RESIST ANT SCREW This appliance is equipped with a tamper -resistant screw to prevent removal of the outer cover . T o reduce the risk of fire or electric shock, do not attempt to remove the outer cover . There are no user serviceable parts inside.
Service, if necessary , must be performed by a Black & Decker Household Appliance Company-Owned or Authorized Service Center . The Service Center nearest you can usually be found in the yellow pages of your phone book under “Appliances-Small-Repairing” or call the appropriate toll-free “800” number on the cover of this book.
For Household Use Only Utilisation domestique seulement - - - replace it free of charge. W e will return your product, transportation charges prepaid, provided it is delivered prepaid to any Black & Decker Household Appliance Company-Owned or Authorized Service Center .
1. Spanish/French Fabric Guide 2. ON/OFF Button/Auto-Off Light 3. Setting Indicator 4. W ater T ank 5. Full-Length Button Groove 6. W ater Fill Hole 7. Push to Clean Setting 8. Adjustable Steam Knob 9. Spray Button 10. Surge of Steam Button 11. Heat/Fabric (Guide) Dial 12.
NOTE : Before first use, remove any labels or stickers on the body or soleplate of the iron. On first use only , iron over an old cotton cloth using steps 1 thru 5 below on setting 3 or above (and the Surge button) to remove any protective surface treatments.
3. Plug in the iron. For models with Automatic Shut-Off, push the ON/OFF button and a light will come on (A). For all models, turn the Heat/Fabric Dial to the appropriate setting for your fabric (B). On models without Auto-Off, the light will cycle on and off when the iron is on.
the Heat/Fabric Dial to FILL, unplug, allow to cool, and store on heel rest. Wrap the cord, and clip in place. (C) STEAM IRONING Be sure the Heat/Fabric Dial is set within the Steam area (between settings 3-7) and there is water in the W ater T ank.
Button several times for a powerful blast of concentrated steam (E). For best results, use Surge at 5 second intervals. Surge of Steam should only be used with- in the steam settings (3 thru 7) on the Heat/Fabric Dial. SPRA Y (Selected Models Only) Check to be sure the iron is filled with water .
the iron, let it cool, and store it on its heel rest. Storing iron on its soleplate can cause leaks or damage. 2. If you want to empty the water , hold the iron over a sink with the tip pointing down. W ater will empty out the Water Fill Hole. CLEANING 1.
An important point after buying a device Black & Decker X500 Series (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Black & Decker X500 Series yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Black & Decker X500 Series - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Black & Decker X500 Series you will learn all the available features of the product, as well as information on its operation. The information that you get Black & Decker X500 Series will certainly help you make a decision on the purchase.
If you already are a holder of Black & Decker X500 Series, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Black & Decker X500 Series.
However, one of the most important roles played by the user manual is to help in solving problems with Black & Decker X500 Series. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Black & Decker X500 Series along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
