Instruction/ maintenance manual of the product X300 Series Black & Decker
Go to page of 12
® * SA VE THIS USE AND CARE BOOK LEASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO CONSERVER CE GUIDE D’ENTRETIEN ET D’UTILISA TION Q uick ’N Easy TM Irons / Planchas / Fers Séries X300 / X400 Series ? U.S.A/CANADA 1-800-23 1-9786 MEXICO 9-1-800-50833 http://www .
IMPORT ANT SAFEGUARDS When using your iron, basic safety precautions should always be fol- lowed, including the following: READ ALL INSTRUCTIONS. ■ Use iron only for its intended use. ■ T o protect against a risk of electric shock, do not immerse the iron in water or other liquid.
■ Always disconnect iron from electrical outlet when filling with or emptying of water and when not in use. ■ Do not operate iron with a damaged cord or plug or if the iron has been dropped or damaged.
SPECIAL INSTRUCTIONS ■ T o avoid a circuit overload, do not operate another high-wattage appliance on the same circuit. ■ If an extension cord is necessary , a 10-ampere rated cord with a polarized plug and UL, CSA, or NOM approval should be used.
SERVICE OR REP AIR Service, if necessary , must be performed by a Black & Decker Company-Owned or Authorized Household Appliance Service Center . The Service Center nearest you can usually be foun.
FULL ONE-YEAR WARRANTY Household Products, Inc. warrants this product against any defects that are due to faulty material or workmanship for a one-year period after the original date of consumer purchase. This warranty does not include damage to the product resulting from accident or misuse.
1. W ater Fill Hole 2. Spray Nozzle 3. T emperature Selector Dial - T emperature - Auto Clean™ Steam V alve - Sure Steam™ System 4. Spray Button (Selected Models) 5. Surge of Steam Button (Selected Models) 6. Pivoting Cord 7. Push ON/OFF Button and Auto-Off Light 8.
NOTE : Before first use, remove any labels or stickers, on the body or sole- plate of the iron. On first use only , iron over an old cotton cloth using steps 1 thru 5 below on setting 5 or above (and the SURGE button for models with that function) to remove any protective surface treatments.
3. Plug in the iron. For models with Automatic Shut-Off, push the ON button and a light will come on (B). For all models, move the T emperature Selector Dial to the appropriate setting for your fabric (C). Always stand the iron on its heel rest when powered on but not in use.
CAUTION: When unwrapping the cord for iron use, be sure there are no twists/kinks in the wire. Over time, twists may result in an electrical short. STEAM IRONING - SURE STEAM TM SYSTEM The Sure Steam™ System automatically produces steam when you turn the T emperature Selector Dial between settings 4 & 7 (C).
SPRA Y (Selected Models Only) Be sure the iron is filled with water . On first use, pump the SPRA Y button 10 times. Use SPRA Y to dampen tough wrinkles at any setting. (F) DRY IRONING T urn the T emperature Selector Dial to Setting 1, 2, or 3 (DRY) to iron without steam (G).
Listed by Underwriters Laboratories Inc. / NOM Approved Copyright © 1996-1999 Household Products, Inc. Pub. No. 175043-00-RV00 Product Made in Mexico/Printed in Mexico Enlistado por Underwriters Laboratories Inc. / Aprobado por NOM Producto hecho en M é xico por: Household Products Limited de Mexico S.
An important point after buying a device Black & Decker X300 Series (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Black & Decker X300 Series yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Black & Decker X300 Series - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Black & Decker X300 Series you will learn all the available features of the product, as well as information on its operation. The information that you get Black & Decker X300 Series will certainly help you make a decision on the purchase.
If you already are a holder of Black & Decker X300 Series, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Black & Decker X300 Series.
However, one of the most important roles played by the user manual is to help in solving problems with Black & Decker X300 Series. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Black & Decker X300 Series along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
