Instruction/ maintenance manual of the product VEC1093DBD Black & Decker
Go to page of 9
VEC1093DBD Fu||y Automatic E|ectro.ic Smart Battery Charger IMPORTANT SAFETY iNFORMATION, SAVE THESE INSTRUCTIONS TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND THIS INSTRUCTIONAL MANUAL,.
VECI093DBD Manual 050205 5/5/05 6:32 PM Page ii iMPORTANT SAFETY iNSTRUCTiONS WARNINGS I. RISK O£ £XPLOSW£ GAS MIXTURES -- WORKING IN VICINITY OF A LRAD-ACID BAYT£RY IS DANGEROUS. BATEERIES G£NERAT£ EXPLOSIVE GAS£S DURING NO£MAL BAT[ERY OPERATION.
VECI093DBDManual 050205 5/5/05 6:32 PM Page iv 5 For negative-grounded vehicle, connect POSITIVE (RED) clamp from battery chargel to POSITIVE (POS, P +) ungrounded pox of balter_ Connect NEGATIVE (BLA.
VECI093DBDManual 050205 5/5/05 6:32 PM Page 2 Stage TMZO -- Absorption Charge maintains the maximum possible charge at a constant, safe, predetermined voltage. During this phase, the charging voltage remains constant, while the actual charging current is reduced to allow for the maximum proper internal chemical energy transfel.
VECI093DBDManual 050205 5/5/05 6:32 PM Page 4 INDICATOR: Large (.375") 3-Character Digital Display in the upper left of the control panel indicates the various conditions and/or status codes: St_mJs Codes are described in the following chart and on the back of charger.
Pressing the 4/10/20/40 AMP button repeatedly advances to standby mode; the unit sounds a beep, displays "000" and stops charging. 4.The battery charger displays the charge current. To view tile battery voltage, press BATTERY VOLTAGE button.
BATTERY RECONDITION MODE should only be used with 10 Amp Hour (Ah) or larger capacity lead-acid batteries, Charge the battery to be treated for 20 minutes, before using RECONDITION Mode.
TROUBLESHOOTING Display Indications/Common Problems/Possible Solutions No Far.lions • Check and make sure the charger is plugged into a live 1 ! 0/! 20 volt AC outlet, • Follow the steps outlined in the Operating Instructions section.
FIVE YEAR LIMITRD WARRANTY PROGRAM This limited warranty progr.Rm is the only one that applies to INs producl, and il sets futth _ill the responsibilities of Vector Manu_cluringr reoz_rding this product¸ There is no olher warrant_L o_her than th_ de_ribed helein This Vector Manu_c[urirlg produc[ is warranted.
An important point after buying a device Black & Decker VEC1093DBD (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Black & Decker VEC1093DBD yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Black & Decker VEC1093DBD - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Black & Decker VEC1093DBD you will learn all the available features of the product, as well as information on its operation. The information that you get Black & Decker VEC1093DBD will certainly help you make a decision on the purchase.
If you already are a holder of Black & Decker VEC1093DBD, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Black & Decker VEC1093DBD.
However, one of the most important roles played by the user manual is to help in solving problems with Black & Decker VEC1093DBD. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Black & Decker VEC1093DBD along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
