Instruction/ maintenance manual of the product VEC012C Black & Decker
Go to page of 19
ST ART -IT ® 450 AMP JUMP-ST ARTER/ AIR COMPRESSOR INSTRUCTION MANUAL Catalog Number VEC012C Cat. # VEC012C Form # 90550870 Aug. 2009 Copyright © 2009 Black & Decker Printed in China VEA EL ESP AÑOL EN LA CONTRAPORT ADA. INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA.
1 GENERAL SAFETY WARNINGS AND INSTRUCTIONS FOR ALL APPLIANCES READ ALL INSTRUCTIONS WARNING: Read all instructions before operating product. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury . • A VOID DANGEROUS ENVIRONMENTS: Don’t use appliances in damp or wet locations.
2 SAFETY GUIDELINES / DEFINITIONS DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury . WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury .
3 • This equipment employs parts (switches, relays, etc.) that produce arcs or sparks. Therefore, if used in a garage or enclosed area, the unit MUST be placed not less than 18 inches above the floor . • THIS UNIT IS NOT FOR USE BY CHILDREN AND SHOULD ONL Y BE OPERA TED BY ADUL TS.
4 • IMPORT ANT : This unit is delivered in a partially charged state. Fully charge unit with a household extension chord (not supplied) for a full 48 hours before using for the first time. Y ou cannot overcharge the unit using the AC charging method.
5 Applications • Jump-start most vehicle batteries with a standard 12 volt DC system: small truck, car , RV , tractor , etc. • Inflate (using inflator) tires, air mattresses, basketballs, volley balls, and more. CHARGING/RECHARGING Lead-acid batteries require routine maintenance to ensure a full charge and long battery life.
6 Recharging battery after each use will prolong batter y life; frequent heavy discharges between recharges and/or overcharging will reduce battery life. The battery can be recharged using the AC Charging Adapter (shown). Make sure all other unit functions are turned OFF during recharging, as this can slow the recharging process.
7 • Excessive engine cranking can damage the vehicle‘s starter motor . If the engine fails to start after the recommended number of attempts, discontinue jump-start procedure and look for other problems that need to be corrected. • After use, turn the Jump-Starter Power Switch OFF .
Accessories Recommended accessories for use with your tool are available from your local dealer or authorized service center . If you need assistance regarding accessories, please call: 1-800-544-6986. WARNING: The use of any accessory not recommended for use with this tool could be hazardous.
9 ST ART -IT ® PUENTE AUXILIAR DE ARRANQUE DE 450 A/COMPRESOR DE AIRE MANUAL DE INSTRUCCIONES Número de catálogo VEC012C LEA EL MANUAL ANTES DE DEVOLVER ESTE PRODUCTO POR CUALQUIER MOTIVO: Si tiene una consulta o algún inconveniente con su producto Black & Decker , visite HTTP://WWW .
10 ADVERTENCIAS E INSTRUCCIONES DE SEGURIDAD GENERALES P ARA TODOS LOS ARTEF ACTOS LEA TODAS LAS INSTRUCCIONES ADVERTENCIA: Lea todas las instrucciones antes de operar el producto. El incumplimiento de todas las instrucciones enumeradas a continuación puede provocar una descarga eléctrica, un incendio o lesiones graves.
11 NORMAS DE SEGURIDAD: DEFINICIONES PELIGRO: Indica una situación de peligro inminente que, si no se evita, provocará la muerte o lesiones graves. ADVERTENCIA: Indica una situación de peligro potencial que, si no se evita, podría provocar la muerte o lesiones graves.
12 • Para reducir el riesgo de descarga eléctrica, desconecte la unidad de cualquier fuente de energía antes de intentar limpiarla o realizarle un mantenimiento. Apagar los controles sin desenchufar la unidad no reducirá este riesgo. ADVERTENCIA: RIESGO DE GASES EXPLOSIVOS • T rabajar cerca de una batería de plomo ácido es peligroso.
13 • Si las conexiones a los terminales POSITIVO y NEGA TIVO son incorrectas, el indicador de polaridad invertida se encenderá (de color rojo) y la unidad emitirá un sonido. Desconecte las pinzas y vuelva a conectarlas a la batería con la polaridad correcta.
14 CARACTERÍSTICAS • 450 amperios que comienzan inmediatos • Interruptor de encendido/apagado (ON/OFF) de energía sin llave • Batería de plomo-ácido incorporada, sellada, de 17 A/h, para tra.
15 CARGA/RECARGAR Las baterías de plomo-ácido requieren mantenimiento de rutina para asegurar una carga completa y una mayor duración de la batería. T odas las baterías pierden energía por descarga espontánea, se descargan con el paso del tiempo, y con mayor rapidez cuando están a temperaturas más altas.
16 Nota: En el caso poco habitual de que el vehículo que se debe arrancar tenga un sistema de positivo a tierra (la terminal positiva de la batería está conectada al bastidor), reemplace los pasos 4a y 4b anteriores con los pasos 5 A y 5b, luego continúe con el paso 6.
17 ADVERTENCIA, PELIGRO DE EST ALLIDO: • El compresor puede inflar hasta 120 libras por pulgada cuadrada (psi) de presión. Para evitar excederse en el inflado, siga cuidadosamente las instrucciones de los artículos a inflar . Nunca exceda las presiones recomendadas.
18 Reemplazo/Eliminación de la batería Se recomienda que la unidad sea devuelta al fabricante para el reemplazo de la batería. Comuníquese con Servicio al cliente, llamando a la línea gratuita (800) 618-5178.
An important point after buying a device Black & Decker VEC012C (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Black & Decker VEC012C yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Black & Decker VEC012C - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Black & Decker VEC012C you will learn all the available features of the product, as well as information on its operation. The information that you get Black & Decker VEC012C will certainly help you make a decision on the purchase.
If you already are a holder of Black & Decker VEC012C, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Black & Decker VEC012C.
However, one of the most important roles played by the user manual is to help in solving problems with Black & Decker VEC012C. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Black & Decker VEC012C along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
