Instruction/ maintenance manual of the product MT300KA Black & Decker
Go to page of 12
MT300.
2 A B C D E.
3 G H F.
4 ENGLISH (Original instructions) Intended use Y our Black & Decker oscillating tool has been designed for DIY applications such as sanding operations. It is also suitable for cutting wooden materials, plastic, gypsum, non-ferrous metals and fastening elements (e.
5 ENGLISH (Original instructions) d. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
6 ENGLISH (Original instructions) Vibration The declared vibration emission values stated in the technical data and the declaration of conformity have been measured in accordance with a standard test method provided by EN 60745 and may be used for comparing one tool with another .
7 ENGLISH (Original instructions) Carbide grout removal blade. (Part number - X26125-XJ) Carbide coated surface ideal for clearing grout and tile adhesive from at surfaces and for fast stock removal of wood, chipboard and breglass. Carbide rasp.
8 ENGLISH (Original instructions) Switching on and off (g. H) u T o switch the tool on, slide the on/of f switch (1) forward (position I). u T o switch the tool of f, slide the on/off switch (1) to the rear (position O). Hints for optimum use u Always hold the tool securely .
9 ENGLISH (Original instructions) T echnical data MT300 (T ype 1) V oltage V AC 230 No-load speed min -1 10,000-22,000 Oscillating angle Degrees 1.4 or 2.
www .2helpU.com 23 - 05 - 12 E16599 MT300 1 TYPE 49 52 54 55 56 X261 10 X26130 X261 15 70 71 72 X26125 73 75.
ENGLISH Do not forget to register your product! www.blackanddecker .co.uk/productregistration Register your product online at www.blackanddecker .co.uk/productregistration or send your name, surname and product code to Black & Decker in your country .
90588339 REV -0 05/2012 Australia Black & Decker (Australia) Pty . Ltd. T el. 03-8720 5100 20 Fletcher Road, Mooroolbark, Fax 03-9727 5940 Victoria, 3138 New Zealand Black & Decker T el. +64 9 259 1 133 5 T e Apunga Place Fax +64 9 259 1 122 Mt Wellington Auckland 1060 United Kingdom Black & Decker T el.
An important point after buying a device Black & Decker MT300KA (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Black & Decker MT300KA yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Black & Decker MT300KA - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Black & Decker MT300KA you will learn all the available features of the product, as well as information on its operation. The information that you get Black & Decker MT300KA will certainly help you make a decision on the purchase.
If you already are a holder of Black & Decker MT300KA, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Black & Decker MT300KA.
However, one of the most important roles played by the user manual is to help in solving problems with Black & Decker MT300KA. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Black & Decker MT300KA along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
