Instruction/ maintenance manual of the product LH4500 Black & Decker
Go to page of 8
BLOWER AND BLOWER V ACUUMS LH5000 LH4500 BL1500 SA VE THIS MANUAL FOR FUTURE REFERENCE. INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCT O. VEA EL ESP AÑOL EN LA CONTRAPORT ADA.
W ARNING: Important Safety W arnings and Instructions PLEASE READ AND UNDERST AND ALL INSTRUCTIONS CAREFULL Y BEFORE USING THE UNIT . T o Reduce Risk of Injury: • Before any use, be sure everyone using this tool reads and understands all safety instructions and other information contained in this manual.
Servicing of Double Insulated Appliances Y our Blower/V ac is double-insulated to give you added safety . In a double insulated appliance, two systems of insulation are provided instead of grounding. No grounding means is provided on a double insulated appliance, nor should a means for grounding be added to the appliance.
ASSEMBL Y FOR BLOW MODE W ARNING: Before attempting any of the assembly steps below , ensure product is switched off and disconnected from the power supply . BLOW TUBE ASSEMBL Y (FIGURES 1-4) • Ensure grill cover is attached to the power head. If not, attach cover as shown in the inset of figure 1 .
• Remove the fan cover from the bottom of the power head by pressing the spring loaded release button (located on the back of the power head) and pulling the cover off ( figure 7 ).
MODEL BL1500 Y our blower is fitted with a single speed switch located on the top of the power head below the handle. • T o turn the tool ON, rotate the knob clockwise to Position I. • T o turn tool OFF , rotate the knob counterclockwise to the off position (0).
As the bag fills the power of the suction will decrease, turn the blower/vac off and unplug from power supply . FOR LH5000 BAG: • Empty the shoulder collection bag by sliding the retaining bar off the bottom of the bag as shown in figure 14 . CAUTION: NEVER REMOVE THE COLLECTION BAG WITHOUT FIRST TURNING OFF AND UNPLUGGING THE V ACUUM.
See ‘T ools-Electric’ – Y ellow Pages – for Service & Sales Imported by Black & Decker (U.S.) Inc., 701 E. Joppa Rd. T owson, MD 21286 U.S.A. TROUBLESHOOTING Problem Possible Cause Possible Solution • Unit will not start. • Fan cover or vac tube not installed.
An important point after buying a device Black & Decker LH4500 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Black & Decker LH4500 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Black & Decker LH4500 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Black & Decker LH4500 you will learn all the available features of the product, as well as information on its operation. The information that you get Black & Decker LH4500 will certainly help you make a decision on the purchase.
If you already are a holder of Black & Decker LH4500, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Black & Decker LH4500.
However, one of the most important roles played by the user manual is to help in solving problems with Black & Decker LH4500. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Black & Decker LH4500 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
