Instruction/ maintenance manual of the product AW-811 Acoustic Research
Go to page of 12
900MHz WIRELESS INDOOR/OUTDOOR SPEAKER Model A W811 Installation and Operation Manual.
1 T able of Contents I. Location of functions………..…………………………………………….… 2 II. Connecting the speaker system............................................................ 3 III. Adjusting the transmitter ..........
2 I. Location of Functions A W811 A W871 Battery Battery Battery Battery Battery Battery Battery Bat tery A udio Output Audio Output A udio Output A udio Output Sortie audio Sortie audio L.
A W811 A W871 Battery Battery Battery Battery Battery Battery Battery Battery Audio Output Audio Output Audio Output Audio Output Sortie audio Sortie audio A W811 A W871 Battery Battery Battery Batter.
A W811 A W871 Battery Battery Battery Battery Battery Battery Battery Battery Audio Output Audio Output Audio Output Audio Output Sortie audio Sortie audio Important: If you are using NiMH or NiCd batteries, the batteries will charge when the headphones are powered with the AC power adapter .
III. Adjusting the T ransmitter 1. T urn ON your audio source (i.e., A/V receiver, TV , stereo, etc.) and play music at a normal listening volume. 2. Set the channel select switch (K) on the back of the transmitter to 1, 2 or 3. The transmitter provides three different broadcasting frequencies.
6 IV . T uning the Speaker 1. Press the Power/tuning/volume (B) up to turn the speaker ON. The power/tuning indicator light (A) will illuminate red until the speaker is tuned to the transmitter and then the light will illuminate green, indicating that the speaker is tuned properly .
7 V . T urning the Speaker Off 1. Press and hold the Power/tuning/volume (B) up to turn the speaker OFF . Y ou will need to hold the control for about 1.5 seconds for the speaker to turn off. 2. Confirm that the speaker is off by verifying that the power/tuning indicator light (A) is no longer illuminated.
8 Hint: If your VCR (or other audio source with RCA jacks) only has a single audio output, you will need another RCA “Y” cable. It differs from the “Y” Cable Adapter included with this speaker . It will have a single male RCA plug and 2 female RCA jacks.
9 Cause and solution: • When using battery power, make sure the batteries are fresh and replace if necessary . • Check that the speaker power/tuning indicator light (A) is illuminated green. • Change the position of the channel select switch (1, 2 or 3) to change the operating frequency .
10 IX. Specifications & Features T ransmitter: Omnidirectional Effective transmitting range: up to 300 feet* 3 selectable broadcast frequencies (between 912.
X. W arranty AD_39382 06/07 1 1 12 MONTH LIMITED W ARRANTY Audiovox Electronics Corporation (the “Company”) warrants to the original retail purchaser of this product that should this product or an.
An important point after buying a device Acoustic Research AW-811 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Acoustic Research AW-811 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Acoustic Research AW-811 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Acoustic Research AW-811 you will learn all the available features of the product, as well as information on its operation. The information that you get Acoustic Research AW-811 will certainly help you make a decision on the purchase.
If you already are a holder of Acoustic Research AW-811, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Acoustic Research AW-811.
However, one of the most important roles played by the user manual is to help in solving problems with Acoustic Research AW-811. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Acoustic Research AW-811 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
