Instruction/ maintenance manual of the product CP120XB Black & Decker
Go to page of 13
PO WER T O GO ® INSTR UCTION MANU AL Thank you f or choosing Blac k & Decker! Go to www .BlackandDec ker .com/Ne wOwner to register your ne w product BEFORE RETURNING THIS PRODUCT FOR ANY REASON PLEASE CALL 1-800-544-6986 BEFORE Y OU CALL, HA VE THE CA T ALOG No , AND D A TE CODE A V AILABLE.
GENERAL SAFETY WARNINGS AND INSTRUCTIONS FOR ALL APPLIANCES READ ALL INSTRUCTIONS WARNING: Read and understand all instructions before operating product. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury .
• DO NOT OPERA TE portable electric tools near flammable liquids or in gaseous or explosive atmospheres. Certain components in these tools normally spark, and the sparks might ignite fumes. • EXTENSION CORDS. Make sure your extension cord is in good condition.
THIS MANUAL CONT AINS IMPORT ANT SAFETY AND OPERA TING INSTRUCTIONS FOR THE POWER TO GO ® MODEL CPI20XB. WARNING: TO REDUCE THE RISK OF INJUR Y : • Follow these instructions and those published by the manufacturer of any equipment you intend to use with this unit.
• Proper cooling is essential when operating this unit. Do not place it near a heat source or in direct sunlight. • The inverter may become uncomfortably warm, reaching 165° F (74° C) under extended high power operation. During operation, keep it away from materials that may be affected by high temperatures.
INTRODUCTION Thank you for choosing the CPI20XB POWER TO GO ® . A convenient, easy-to- carry , rechargeable portable power source that supplies energy for 115 volt AC and USB powered personal electronic devices.
HO W THE PO WER T O GO ® W ORKS The POWER TO GO ® is a power inverter with built-in batteries. A power inverter is an electronic device that converts low voltage DC (direct current) electricity from a battery to 115 volt AC (alternating current) household power .
OPERA TING INSTR UCTIONS Charging the POWER TO GO ® Attach the barrel tip of the AC Charging Adapter to the AC Charging Port of the POWER TO GO ® and plug the standard two-prong plug into an appropriate, functioning 120 volt AC outlet.
power consumption is rated in amps AC, simply multiply by the AC volts (115) to determine the wattage. Resistive loads are the easiest for the inverter to run; however , it will not run larger resistive loads (such as electric stoves and heaters), which require far more wattage than the inverter can deliver .
CARE AND MAINTENANCE Storage 1. Make sure that the 115 Volt AC and USB receptacle covers are functioning properly and are in the closed position covering the receptacles when storing the POWER TO GO ® . 2. Ideal storage temperature range is 0-40°C (32-104°F).
TR OUBLESHOO TING GUIDE Common Power Output Problems – 115 Volt AC Possible Cause Recommendations Red battery status LED indicator is Unit is in charging mode. For optimum flashing and there is no output results, allow unit to complete charging cycle before using.
Accessories Recommended accessories for use with your tool are available from your local dealer or authorized service center . If you need assistance regarding accessories, please call: 1-800-544-6986. WARNING: The use of any accessory not recommended for use with this tool could be hazardous.
SPECIFICA TIONS Input: 8.4 V DC, 5.0A Inverter Output: 115 V AC, 60Hz, 20 watts for 5 minutes, 16 watts continuous USB Output: 5 V DC (350mA) Batteries: 1.2 AH NiMH Impor ted by Black & Dec ker (U .S.) Inc., 701 E. Joppa Rd. T owson, MD 21286 U .S.
An important point after buying a device Black & Decker CP120XB (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Black & Decker CP120XB yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Black & Decker CP120XB - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Black & Decker CP120XB you will learn all the available features of the product, as well as information on its operation. The information that you get Black & Decker CP120XB will certainly help you make a decision on the purchase.
If you already are a holder of Black & Decker CP120XB, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Black & Decker CP120XB.
However, one of the most important roles played by the user manual is to help in solving problems with Black & Decker CP120XB. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Black & Decker CP120XB along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
