
IMPORTANT SAFEGUARDS Read the operating instructions carefully before putting the applian ce into operation and keep the instructions including the warranty, the receipt and, if possible, the box with the internal packing. If you give this device to other people, please also pass on the operating instructions. The appliance is designed exclusively for private use and for the en visaged purpose. This appliance is not fi t for commercial use. Do not use it outdoors. Keep it away from sources of heat, direct sunlight, humidity (never dip it into any liquid) and sharp edges. Do not use the appliance with wet hands. If the appliance is humid or wet, unplug it immediately. When cleaning or putting it away, switch off the appliance and always pull out the plug from the socket (pull the plug itself, not the lead) if the appliance is not being used and remove the attached accessori es. Do not operate the machine without supervision. If you leave the room you should always turn the device off. Remove the plug from the socket. Check the appliance and the cable for damage on a regular basis. Do not use the appliance if it is damaged. Do not try to repair the appliance on your own. Always contact an authorized technician. To avoid the exposure to danger, always have a faulty cable be replaced only by the manufacturer, by our customer service or by a qualified person and with a cable of the same type. Use only original spare parts. Pay careful attention to the following “Special Safety Instructions“. Children and Frail Individuals In order to ensure your children‘s safety, please keep all packaging (plastic bags, boxes, polystyrene etc.) out of their reach.


PARTS DESCRIPTION 1. mixer head 2. turbo button 3. speed switch 4. eject button 5. dough hooks 6. beaters 7. spatula

PREPARING YOUR HANDMIXER 1. Insert the dough-hooks/beaters into the mixer head. (Fig.1) 2. Make sure the dough-hooks/beaters are locked at the right place. (Fig.2) If using the mixer with stand, insert the dough-hook/beater with the plastic gear ensuring it aligns with the drive gear on the cradle. The dough-hooks/beaters can only be removed when the speed switch is in the off “0” position.
PREPARING YOUR STANDMIXER 1. Press the cradle release button, raise the cradle. Place the mixing bowl onto the mixer stand. (Fig.3, Fig.4) 2. Put the mixing plate onto the stand, then press the cradle release button, push down the cradle. (Fig.5, Fig.6, Fig.7) 3. Hold and press down the mixer head Onto the cradle, lock it properly. (Fig.8, Fig.9)


OPERATING TO USE YOUR STANDMIXER 1. Press the cradle release button, raise the cradle. 2. Place the ingredients into the mixing bowl and then place the bowl onto the mixer stand. 3. Press the cradle release button with one hand and then push down the cradle/mixer-head with the other. 4. Plug in. 5. Pull the speed switch backwards to reach the desired speed (the first dot on the mixer head is the slowest speed setting). As the mixture thickens, increase the speed.

If the machine starts to slow or labour, increase the speed. Press the turbo button to operate the motor at maximum speed. The motor will operate for as long as the button is held in position. 6. When the mixture has reached the desired consistency, return the speed switch to the off “0” position and raise the mixer-head/cradle. It may be necessary to scrape down the sides of the bowl and along the bottom at regular intervals to assist the mixing operation. 7. To remove the tools, make sure the speed switch is in the off “0” position and unplug the mixer. Hold on to the tool shafts and press the eject button.
HINTS When creaming for cake mixtures, use butter or margarine at room temperature or soften before use. For best results with small quantities, use the handmixer without the stand. Large quantities and thick mixtures may require a longer mixing time. If you wish to mix larger quantities or heavier mixes, remove the mixer head from the stand and use a bowl of an appropriate size.



For any improvement reasons, Beper reserves the right to modify or improve the product without any notice.
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain, and reduce the impact on human health and the environment. The crossed out “wheeled bin” symbol on the product reminds you of your obligation, that when you dispose of the appliance, it must be separa tely collected.

This appliance has been checked in the factory. From the date of original purchase a 24 month guarantee applies to material and production defects. The purchase receipt and the guarantee cer tificate must be submitted together in case of claim to guarantee.
The guarantee is valid only with a guaranty certificate and proof of purchase (fiscal receipt) indicating the date of purchase and the model of the appliance
For any technical assistance, please contact directly the seller or our head office in order to preserve the appliance’s efficiency and NOT TO void the guarantee. Any intervention on this appliance by non-authorized persons will automatically void the guarantee.
If the appliance shows defects as a result of faulty material and/or production during the period of guarantee, we guarantee repair free of charge on condition that:
- The appliance has been used properly and for the purpose for which it has been intended. - The appliance has not been tampered with, otherwise it is not maintainable. - The purchase receipt shall be presented. - The appliance showing a fair wear and tear shall not be covered by this guarantee.
Therefore, any part that could be accidentally broken or having visible signs of use in consumable products (such as lamps, batteries, heating elements…) the aesthetic parts are excluded from the guarantee, and any defect whatsoever resulting from non-respect of the rules for use, negligence in usage and/or maintenance of the appliance, carelessness, wrong or improper installation, damage during transport and any other damage not attributable the supplier.
For every defect that could not be repaired within the guarantee period, the appliance will be repla ced free of charge.
In any case, if the part to be replaced for defect, breakage or malfunction is an accessory and/or a detachable part of the product, Beper reserves the right to replace only the very part in question and not the entire product
Even after the guarantee period we will always pay attention to repairs for defected appliances. For technical assistance and/or repairs after the guarantee period you can directly contact the below address:
CONTACT YOUR DISTRIBUTOR IN YOUR COUNTRY OR AFTER SALES DEPARTMENT
BEPER. E-MAIL assistenza@beper.com WHICH WILL FORWARD YOUR ENQUIRIES TO YOUR DISTRIBUTOR.
Pages referenced in this manual — manufacturer, support and downloads.
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.