Instruction/ maintenance manual of the product BLM10600G Black & Decker
Go to page of 2
Size: 19.685" x 17.5" POR FAVOR LEA ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO. PLEASE READ AND SAVE THIS USE AND CARE BOOK. Licuadora de 1 0 velocidades 10 -Speed Blender Modelo Model ❑ B.
BLENDER JAR ASSEMBLY 1. After unpacking the blender, before first use, wash all parts except the unit base. 2. Put the gasket on top of the blade assembly. 3. Place the blade assembly into the jar base and turn the jar base clockwise until tight (A). 4.
An important point after buying a device Black & Decker BLM10600G (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Black & Decker BLM10600G yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Black & Decker BLM10600G - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Black & Decker BLM10600G you will learn all the available features of the product, as well as information on its operation. The information that you get Black & Decker BLM10600G will certainly help you make a decision on the purchase.
If you already are a holder of Black & Decker BLM10600G, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Black & Decker BLM10600G.
However, one of the most important roles played by the user manual is to help in solving problems with Black & Decker BLM10600G. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Black & Decker BLM10600G along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
