Instruction/ maintenance manual of the product 95P1 Bissell
Go to page of 16
2 Thank You USER'S GUIDE 95P1 / 82H1 SERIES Safety Instructions Product View Assembly Operations Maintenance and Care Warranty Troubleshooting Product Registration Consumer Services 3 4 5 6-8 8-1.
We’re glad you purchased a BISSELL vacuum. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system. Your carpet cleaner is well made, and we back it with a limited one year warranty.
www .bissell.com 800.237.7691 I MPOR T ANT SAFETY INSTRUCTIONS 3 When using an electrical appliance, basic precautions should be obser ved, including the following: READ ALL INSTRUCTIONS BEFORE USING UPRIGHT V ACUUM Always connect to a polarized outlet (left slot is wider than right).
Power Cord www .bissell.com 800.237.7691 4 P roduct view W ARNING: Plastic film can be dangerous. T o avoid danger of suffocation, keep away from babies and children. CAUTION: Do not plug in your vacuum cleaner until you are familiar with all instructions and operating procedures.
www .bissell.com 800.237.7691 A ssembly 5 2. 2. Hose W and Base The only tool you’ll need to assemble your vacuum cleaner is a Philips head screwdriver . Attach handle to vacuum 1. Locate the vacuum handle and remove the screw packet taped to the base of the handle.
www .bissell.com 800.237.7691 O perations 6 Handle position Press the handle release pedal with your foot to place your CleanView Helix into one of three cleaning positions. 1. Upright – For storage and above floor cleaning with tools. 2. Normal cleaning – Press handle release household floor cleaning tasks.
www .bissell.com 800.237.7691 7 O perations Air flow indicator (select models only) The air flow indicator tells you when airflow in the vacuum is reduced due to a clog in the hose. The indicator will remain green until the airflow is reduced. When it is fully red, the airflow is significantly reduced or blocked.
www .bissell.com 800.237.7691 O perations 8 Power cord storage When you have finished using your BISSELL CleanView Helix, return it to the upright position and store the power cord. 1. T ur n vacuum cleaner off. 2. Unplug power cord by grasping the polarized plug (NOT the cord) and dis- connect from outlet.
www .bissell.com 800.237.7691 9 M aintenance and care Empty Dirt Container continued 5. Put the dirt container back in the vacuum and slide the lever to the "Lock" position. Note: The dirt container may be washed in warm water with a mild detergent.
www .bissell.com 800.237.7691 M aintenance and care 10 Cleaning the pre-motor filter 1. Unplug the cleaner from electrical outlet. 2. The pre-motor filter protects the motor from debris. It is located underneath the filter cup in the center of the round part of the Lock ‘n Seal™ lever .
www .bissell.com 800.237.7691 11 M aintenance and care . 5. Clean strings, hair and other debris from rotating floor brush, paying particular attention to brush ends. 6. Clean strings, hair and other debris from motor pulley and drive belt areas. 7. Check drive belt carefully for wear , cuts or stressed areas.
www .bissell.com 800.237.7691 www .bissell.com 800.237.7691 12 Clearing a clog Low suction or poor pickup may be due to a clog in the vacuum cleaner . If you notice a change in the sound of the motor or a reduction in the spinning action, check for clogs.
www .bissell.com 800.237.7691 13 V acuum cleaner won’ t turn on Possible causes Remedies 1. Power cord not plugged in 1. Check electrical plug 2. Blown fuse/tripped breaker 2. Check/replace fuse or reset breaker V acuum cleaner won’ t pick up dirt Possible causes Remedies 1.
R eplacement Parts - CleanView Helix ® Item Part No. Part Name 1 32074 Style 9 Drive Belt (2-Pack) 2 203-2450 Hose Assembly 3 203-2448 Brush Dowel (13.
www .bissell.com 800.237.7691 15 W arranty - BISSELL CleanView Helix ® 95P1 and 82H1 This warranty gives you specific legal rights, and you may also have other rights which may var y from state to state.
©2011 BISSELL Homecare, Inc Grand Rapids, Michigan All rights reserved. Printed in Korea Part Number 110-4458 Rev 11/11 Visit our website at: www .bissell.com For information about repairs or replacement par ts, or questions about your warranty , call: BISSELL Consumer Services 1-800-237-7691 Monday - Friday 8 a.
An important point after buying a device Bissell 95P1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bissell 95P1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bissell 95P1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bissell 95P1 you will learn all the available features of the product, as well as information on its operation. The information that you get Bissell 95P1 will certainly help you make a decision on the purchase.
If you already are a holder of Bissell 95P1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bissell 95P1.
However, one of the most important roles played by the user manual is to help in solving problems with Bissell 95P1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bissell 95P1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
