Instruction/ maintenance manual of the product 9200 SERIES Bissell
Go to page of 24
USER’S GUIDE 9200, 9400 SERIES 220-240V 3 Safety Instructions Product View / Accessories Assembly Features / Operations T roubleshooting Consumer Services Replacement Parts Warranty 4-5 6 7-18 19-20 21 22-23 24 ug310-5880_9200E_406.indd 1 ug310-5880_9200E_406.
2 W e’re glad you purchased a BISSELL ProHeat 2X heated formula deep cleaner . Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system. Y our ProHeat 2X is well made, and we back it with a limited two-year warranty .
When using an electrical appliance, basic precautions should be observed, inc luding the following: READ ALL INSTRUCTIONS BEFORE USING Y OUR UPRIGHT DEEP CLEANER. Always connect to a properly Earthed outlet. Unplug from outlet when not in use and before conducting maintenance or troubleshooting.
Easy T o Remove Nozzle Heat Indicator Light Lower Base 2-in-1 W ater T ank Edge Sweep Brushes T ank Carr y Handle Power Switch Optional Accessories: Spraying Crevice T ool Scotchgard ™ Protector Applicator T ool Bag 3” T ough Stain Brush 4” Upholstery T ool 6' Stair T ool T urboBrush ™ Hard Floor Attachment 4 www .
BISSELL Formulas: Formula T ank Crevice T ool Holder (select models) Upper Hose Rack Lower Base T urboBrush ™ Storage (select models) Detent Pedal Lower Hose Rack Keep plenty of genuine BISSELL Deep Cleaning Formulas on hand so you can clean whenever it fits your schedule.
This User’ s Guide has been designed to help you get the utmost satisfaction from your BISSELL ProHeat 2X. Y ou’ll find assembly and operating instructions, safety precautions, as well as maintenance and troubleshooting instructions. Please read this User's Guide thoroughly before assembling your Deep Cleaner .
Y our BISSELL ProHeat 2X Deep Cleaner is a home cleaning system that uses the power of heat, brushes and cleaning formula to get the deep down dirt for a maximum clean. Not only does it come with a lot of unique features, it has been designed with you, the customer , in mind.
Carpet protection applied at the mill typically wears down with heavy foot traffic over time and with everyday cleaning, including deep cleaning. T o help restore this important protection, BISSELL of.
1. Plan activities to give your carpet time to dry . 2. Move furniture to another area if cleaning an entire room (optional). 3. Vacuum area with a dry vacuum cleaner thoroughly before deep cleaning. 4. Plan your cleaning route to leave an exit path. It is best to begin cleaning in the corner farthest from your exit.
2. Fill the formula tank. Fill up the formula tank by first unscrewing the cap and insert. Always use genuine BISSELL formulas to maximize cleaning and for the safety of your machine. Fill formula up to the line and replace the cap and insert. Place formula tank into the slot in the back of the machine for a snug fit.
7. Remove the tank from the base of the machine by lifting up on the tank carry handle. Carry like a bucket to a utility sink or outside where you will dispose of the dirty water . 7a. Unlatch the top of the tank from the bottom by lifting up on the tank latch which is located on the back of the tank.
For best results, a few simple steps can assure your machine is well maintained after your cleaning is complete. 1. T urn power and heater s witches OFF (O).
Some models are equipped with a Scotchgard protector post-treatment applicator and cartridge. Using this, along with one of the BISSELL Deep Cleaning Formulas containing Scotchgard, to help retain the carpet cleanliness achieved with the ProHeat 2X machine.
Y our ProHeat 2X machine comes equipped with a flex hose and at least one c leaning tool for cleaning stairs, upholstery , and more. 1. Important! If using to clean upholstery , check upholstery tags. A. Check manufacturer’ s tag before cleaning. “W” or “WS” on the tag means you can use your ProHeat 2X.
Keep plenty of genuine BISSELL Deep Cleaning Formula and Scotchgard protector post-treatment cartridges on hand so you can clean and protect whenever it fits your schedule. Always use genuine BISSELL Deep Cleaning Formulas. Do not delay! Attending to an accident soon after it occurs ensures the most optimal clean.
Y our ProHeat 2X model may come with a hard floor tool and Hard Floor Solutions Formula. If not, these products are available for purchase by contacting the BISSELL Consumer Services department by phone. The hard floor tool provides effective cleaning for linoleum, vin yl, and tile floors.
17 www .bissell.com Occasional replacement of one or both belts may become necessary . If that is needed, please follow the instructions below . 1. T urn off the machine, and unplug it from the outlet. 2. Remove both the 2-in-1 water tank and the formula tank.
18 www .bissell.com Brushes can be removed for cleaning or replacement as needed. 1. F ollow Small Belt Removal Instructions on page 17. 2. Remove brush rolls by pulling them off of the metal rods. 3. Place cleaned or new brush rolls back onto the rods.
19 www .bissell.com T roubleshooting Built-in heater ready light does not illuminate Possible Cause Remedies 1. The heater switch is not turned ON ( I ). 1. T urn the heater s witch ON ( I ). 2. The power switch is not turned ON ( I ). 2. Both switches must be ON ( I ) to activate the heater read y light.
20 www .bissell.com T roubleshooting (Continued) Cleaner not picking up solution Possible Causes Remedies 1 . Ready T ools dial may be at wrong setting. 1 . Set Ready T ools dial to either floor c leaning or hose attachments setting. 2. 2-in-1 w a ter tank may not be seated properly .
If your BISSELL product should require service: In the UK, Australia, or New Zealand, call BISSELL Consumer Services at the numbers below and we will give you the location of a BISSELL Authorized Service Center in your area. For all other countries, contact your local in country distributor for questions, service, or repair .
R eplacement P arts - BISSELL ProHeat 2X Replacement Parts* Below please find a list of common replacement parts. While not all of these parts may have come with your specific machine, all are available to you for purchase, if desired.
R eplacement P arts - BISSELL ProHeat 2X 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 29 30 31 23 www .bissell.com 28 32 ug310-5880_9200E_406.
W arranty - BISSELL ProHeat 2X 24 www .bissell.com This warranty gives you specific legal rights, and you may also have other rights which may var y from country to country .
An important point after buying a device Bissell 9200 SERIES (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bissell 9200 SERIES yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bissell 9200 SERIES - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bissell 9200 SERIES you will learn all the available features of the product, as well as information on its operation. The information that you get Bissell 9200 SERIES will certainly help you make a decision on the purchase.
If you already are a holder of Bissell 9200 SERIES, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bissell 9200 SERIES.
However, one of the most important roles played by the user manual is to help in solving problems with Bissell 9200 SERIES. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bissell 9200 SERIES along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
