Instruction/ maintenance manual of the product 7901 SERIES Bissell
Go to page of 24
Safety Instructions Product View/Accessories Assembly Features / Operations ProHeat ™ USER’S GUIDE 7901 SERIES 8910 SERIES 3 4 5 6-17 Routine Maintenance 17-19 T roubleshooting 20-21 Warranty 24 R.
Thanks for buying a BISSELL ProHeat ® W e’re glad you purchased a BISSELL ProHeat ® heated formula deep cleaner . Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system. Y our ProHeat is well made, and we back it with a full one-year warranty .
3 IMPOR T ANT SAFETY INSTRUCTIONS ■ Use only cleaning products formulated by BISSELL for use in this appliance. ■ Keep openings free of dust, lint, hair , etc. ■ Do not point attachment nozzle at people or animals. ■ Keep appliance on a level surface.
4 SmartMix ® T ank DirtLifter ® PowerBrush Floor Nozzle Window SmartT emp ® Ready Light ReadyT ools ™ Dial Lower Handle Belt Access Door Flow Indicator (Filter Inside) SmartMix ® Switch Flex Hos.
5 How T o Put It T ogether How to use this guide This User’ s Guide has been designed to help you get the utmost satisfaction from your BISSELL ProHeat. Y ou’ll find assembly and operating instructions, safety precautions, as well as maintenance and troubleshooting instructions.
SmartMix bottle ON O F F 6 Special F eatures of your BISSELL ProHeat The ProHeat is a home cleaning system that automatically mixes hot tap water with Fiber Cleansing Formula and heats the solution as it is applied to the carpet. The combination of heated cleaning solution, powered brush and suction provide a safe and effective method of cleaning.
7 SmartMix Replace SmartMix concentrate bottle. Choose the SmartMix setting that fits the cleaning job. Water Rinse / Carpet Protector -This setting must also be used when applying the carpet protectant through the applicator , to prevent the pump from temporarily losing its prime.
8 T ank-in-T ank Continued Lift the T ank-in-T ank handle. The handle locks the lid in place. Carry it like a bucket to fill at the sink. Note: Y ou may notice hair and debris deposits on the carpet that were loosened by the brushing action (especially with newer carpets that have never been deep cleaned before).
Remove T ank Lid by rotating handle forward to unlatch lid and lifting lid off tank. Pour out dirty water . After each use, remove and rinse the lint screen located on the tank lid. A. Remove tank assembly from unit. B. Remove tank lid. C. Remove any debris caught in lint screen.
10 Plan activities to give carpet time to dry . Remove easily moved furniture from the room (chairs, lamps, coffee tables, etc). Vacuum thoroughly to pick up loose debris and pet hair before using the ProHeat. Plan your cleaning route to leave an exit path.
11 Carpet Cleaning 1. 2. 3. 4. 5. 6. A TTENTION BERBER C ARPET OWNERS: Some Berber Carpets have a tendency to fuzz with wear . Repeated strokes in the same area with an ordinary vacuum or deep c leaner may aggravate this condition. Please see Stain Removal instructions on page 12.
12 Stain Removal Do Not Delay! Failure to attend to an accident soon after it occurs may cause it to set and become permanent. Before treating any stain, follow these pre-treatment steps: Blot up liquids with an absorbent cloth or paper towels. White materials are recommended because certain dyes may bleed and make the stain worse.
13 (Available on select models only) Unplug cleaner from the outlet before attaching T urboBrush. Attach T urboBrush to the flex hose by pressing tool onto the grip/trigger until button snaps into hole. Make certain tool is securely in place. Move the T urboBrush switch to the “BR USH” position.
14 The Scotchgard protector applicator (with formula included) can be used to help retain the carpet cleanliness you achieve with your ProHeat machine. For best results the post c leaning trea tment should be applied while the carpet is still wet or damp.
15 T ip: Deep cleaning carpeting and upholstery with BISSELL Multi- Allergen Removal ™ Formula regularly can reduce dust mite waste and allergens in your home . Check manufacturer’ s tag before cleaning. “W” or “WS” on the tag means you can use your ProHeat.
16 The Bare Floor T ool (available with select models only) provides effective cleaning for linoleum, vinyl, and tile floors. Caution: Do not use on hardwood floors. Use BISSELL Floor Cleansing Formula. Vacuum or sweep thoroughly to pick up loose debris and pet hair .
17 Routine Maintenance Slowly move the machine nozzle with Bare Floor T ool forward and back over soiled surface one time while pressing the trigger . Caution: Do not over wet. Repeat the motion without pressing the trigger using the Bare Floor T ool to squeegee and suction up the dirty water .
18 T urn the machine off and unplug from the wall outlet. Step on the release pedal and recline the handle down onto floor . (see illustration). Remove T ank-In-T ank and SmartMix tanks.
19 T o Install the Replacement Pump Belt With the unit still on its side, loop one end of the replacement pump belt around the red pump pulley and then the other end around the silver motor shaft (see illustration). Do not twist the replacement pump belt.
20 W ARNING: T o reduce the risk of fire, electric shock or injury unplug from outlet before servicing. T roubleshooting SmartT emp Ready Light does not illuminate. Possible Causes Remedies The SmartT emp switch is not T urn on the SmartT emp switch. turned ON.
21 DirtLifter P owerBrush does not turn. Possible Causes Remedies The Brush Belt or Pump Belt T urn the machine OFF and unplug from is off or broken. the outlet. T o check if a Pump Belt has broken, you will need a flat head screwdriver . Insert the blade end into the lower slot of the Belt Access door to release the lower snap.
22 BISSELL Consumer Ser vices For information about repairs or replacement parts, or questions about your warranty , call: BISSELL Consumer Services 1-800-237-7691 Monday - Friday 8 a.m. — 10 p.m. ET Saturday 9 a.m. — 8 p.m. ET Or write: BISSELL Homecare , Inc .
23 Replacement parts - BISSELL ProHeat ® Item P art No. Part Name 1* 210-9201 4” Small Area T ool 2* 210-9148 Spraying Crevice T ool 3* 210-1197 T urboBrush ® 4* 214-9131 Bare Floor T ool 5* 214-9.
24 This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. If you need additional instruction regarding this warranty or have questions regarding what it may cover , please contact BISSELL Consumer Services by E-mail, telephone, or regular mail as described below.
An important point after buying a device Bissell 7901 SERIES (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bissell 7901 SERIES yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bissell 7901 SERIES - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bissell 7901 SERIES you will learn all the available features of the product, as well as information on its operation. The information that you get Bissell 7901 SERIES will certainly help you make a decision on the purchase.
If you already are a holder of Bissell 7901 SERIES, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bissell 7901 SERIES.
However, one of the most important roles played by the user manual is to help in solving problems with Bissell 7901 SERIES. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bissell 7901 SERIES along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
