Instruction/ maintenance manual of the product 6801 Bissell
Go to page of 16
USER’S GUIDE 3750/6595/6801 SERIES Safety Instructions 3 Product Diagram 4 Assembly Instructions 4-6 Operation / Special T ools 6-9 Maintenance 10-13 T roubleshooting 14 Warranty 16 Replacement Parts 15 Consumer Services 15 Lift-Off ® BAGLESS ug603-5540_3750_905.
2 Thanks For Buying A BISSELL Lift-Off ® We’re glad you purchased a BISSELL Lift-Off Vacuum. Everything we know about floor care went into the design and construction of this powerful, high-tech home vacuuming system. Y our BISSELL Lift-Off is well made, and we back it with a limited comprehensive one-year warranty .
3 IMPOR T ANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should be observed, inc luding the following: READ ALL INSTRUCTIONS BEFORE USING Y OUR UPRIGHT V ACUUM. Always connect to a polarized outlet (left slot is wider than right).
4 C AUTION: Do not plug in your vacuum cleaner until you are familiar with all instructions and operating pr ocedures. Power Switch Crevice T ool Handle Quick Release Cord Wrap Handle Release Pedal Po.
How T o Use This Guide This User’ s Guide has been designed to help you get the most satisfaction from your BISSELL Lift-Off. Y ou’ll find assembly and operating instructions, safety precautions, as well as maintenance and troubleshooting instructions.
Slide the end of the Hose Grip onto the Hose Grip Base. Place the Hose into the Hose Clip. NOTE: The P owerfoot will not operate effectively unless the Hose is firmly attached to the base. Snap the T elescoping Extension W and, Crevice T ool, and Combination T ool into storage clips as shown.
The Powerfoot on your BISSELL Lift-Off can be adjusted to clean several floor surfaces. NOTE: For optimal c leaning performance, adjust to the lowest practical setting. If your cleaner is difficult to push, adjust to the next higher setting. Place Handle in Upright Position.
T elescoping Extension Wand: Use with desired attachment for a longer reach. T o extend the W and, twist the collar to “Unlock” position and push away from you. T wist the collar to the “Lock” position to lock into place. T o retract, twist to unlock, pull toward you and twist to relock.
9 Select Models Only The Shoulder Strap may be used while cleaning with the Detachable Canister . T o attach the Shoulder Stra p, wrap the V elcro ends attached to the bottom of the strap securely around the Canister handle as shown.
Upper T ank Knob How to Maintain Y our BISSELL Lift-Off T o maintain maximum cleaning performance, the following maintenance steps must be performed: Empty the Dirt Container when the dirt reaches the “Full” line on the side. Check the Upper T ank and Pre-Motor Filters at least once a month and clean and replace as needed.
Use only BISSELL Style 8 Replacement Filters in your BISSELL Lift-Off ® . Unplug the cleaner from electrical outlet. The Pre-Motor Filter protects the motor from dirt partic les. It is located in the slide out tray underneath the Dirt Container . If the filter becomes dirty , pull out the tray, lift out the filter and clean.
Place one end of the new Drive Belt over Motor Pulley and the other end over the Brush in the space between the bristles. Pull the Brush firmly to stretch the Drive Belt and place ends of Brush down into slots on sides as shown. T urn Brush several times by hand to center the Drive Belt.
Low suction or poor pickup may be due to a clog in the vacuum cleaner . If you notice a change in the sound of the motor or a reduction in the spinning action, check for c logs. Unplug cleaner from electrical outlet. Empty Dirt Container . Check Upper T ank for build up or clogs.
Vacuum c leaner won’t run P ossible Causes Remedies Power cord not plugged in Check electrical plug Blown fuse/tripped breaker Check/Replace fuse or reset breaker Thermal protector activated Allow cleaner to cool for 30 minutes, see pg.
Y ou may purchase replacement parts from your retailer , by calling BISSELL Consumer Services or by visiting our website. T o locate a retailer near you, or to place an order using Visa, MasterCard, Discover or American Express, call BISSELL Consumer Services 1-800-237-769 1 Monday - Friday 8 a.
Warranty 16 This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. If you need additional instruction regarding this warranty or have questions regarding what it may cover , please contact BISSELL Consumer Services by E-mail, telephone, or regular mail as described below.
An important point after buying a device Bissell 6801 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bissell 6801 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bissell 6801 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bissell 6801 you will learn all the available features of the product, as well as information on its operation. The information that you get Bissell 6801 will certainly help you make a decision on the purchase.
If you already are a holder of Bissell 6801, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bissell 6801.
However, one of the most important roles played by the user manual is to help in solving problems with Bissell 6801. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bissell 6801 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
