Instruction/ maintenance manual of the product 5288 SERIES Bissell
Go to page of 12
5288 SERIES 220-240V 3 Safety Instructions Product View Assembly Operations Maintenance and Care T roubleshooting Consumer Services Replacement Parts 4 5 5-7 7-8 9 10 11 Warranty 12 USER’S GUIDE ug603-6913_5288E_1006.
16 www .bissell.com 2 T hanks for buying a BISSELL FlipEase™ Cordless Hard Floor Cleaner 2 www .bissell.com W e’re glad you purchased a BISSELL Flip-Ease. Everything we know about floor care went into the design and construction of this complete, convenient cleaning system.
16 www .bissell.com 3 I MPOR T ANT SAFETY INSTRUCTIONS www .bissell.com When using an electrical appliance, basic precautions should be observed, inc luding the following: READ ALL INSTRUCTIONS BEFORE USING YOUR BISSELL FLIP-EASE CORDLESS HARD FLOOR CLEANER.
16 www .bissell.com 4 www .bissell.com Spray T rigger Power Switch Dirty T ank Filter Dirty T ank Latch Clean T ank Charging Port MicroFiber™ Pad Solution Hose W et Mop Path Dry V acuum Suction Path P roduct View Spray Tips (2) C AUTION: Only use BISSELL Hard Floor Solutions in your cleaner .
16 www .bissell.com 5 www .bissell.com This user’ s guide has been designed to help you get the utmost satisfaction from your Flip-Ease cordless hard floor cleaner . Y ou’ll find assembly directions, instructions for all cleaning tasks, safety precautions, plus maintenance and troubleshooting instructions.
16 www .bissell.com Charging the battery (Continued) 4. T o charge your Flip-Ease, connect the round end of the charger cord into the charging port on the side of the unit. Make sure it is securely connected and the charger indicator light is illuminated.
16 www .bissell.com 7 www .bissell.com 4. Check the filter frequently . If you see hair and fuzzy debris collecting on the filter , remove the dirty tank and dirty tank lid to clean the filter . 5. T o clean the filter , gently tap it on the edge of the trash can, brushing off anything that may be sticking to the filter .
16 www .bissell.com M aintenance and care (Continued) Cleaning the MicroFiber pad 1. T o wash the MicroFiber pad, simply toss in the wash, air dry and reuse. No need to buy disposable cloths every time you use your Flip-Ease Machine storage 1. Clean exterior surface of Flip-Ease with a soft cloth dampened with water only .
16 www .bissell.com T roubleshooting Problems Possible Causes 1. No suction or unit will not turn on 1. Unit is not charged 2. No or low suction 2. Batteries are run down Filter clogged Dirty tank not inserted properly MicroFiber pad covering suction path Clogged suction path Foot not properly installed 3 No Spray 3.
16 www .bissell.com B ISSELL Consumer Services 10 www .bissell.com If your BISSELL product should require service: In the UK, Australia, or New Zealand, call BISSELL Consumer Services at the numbers below and we will give you the location of a BISSELL Authorized Service Center in your area.
16 www .bissell.com R eplacement parts - BISSELL Flip-Ease Item Part No. Part Name 1 203-6917 Handle Assembly 2 203-6918 Clean T ank (w/ Cap & Insert) 3 203-6919 Clean T ank Cap & Insert 4 203.
16 www .bissell.com W arranty - BISSELL Flip-Ease 12 www .bissell.com This warranty gives you specific legal rights, and you may also have other rights which may vary from country to country .
An important point after buying a device Bissell 5288 SERIES (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bissell 5288 SERIES yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bissell 5288 SERIES - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bissell 5288 SERIES you will learn all the available features of the product, as well as information on its operation. The information that you get Bissell 5288 SERIES will certainly help you make a decision on the purchase.
If you already are a holder of Bissell 5288 SERIES, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bissell 5288 SERIES.
However, one of the most important roles played by the user manual is to help in solving problems with Bissell 5288 SERIES. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bissell 5288 SERIES along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
