Instruction/ maintenance manual of the product 5288 Bissell
Go to page of 12
USER’S GUIDE 5288 SERIES 3 Safety Instructions Product View Assembly Operations Maintenance and Care T roubleShooting Consumer Services Replacement Parts 4 5 6-7 7-8 9 10 11 Warranty 12 ug603-6913_5288_606.
2 T hanks for buying a BISSELL Hard Floor Cleaner 2 www .bissell.com 800.237.7691 W e’re glad you purchased a BISSELL Flip-Ease™. Everything we know about floor care went into the design and construction of this complete, convenient cleaning system.
3 I MPOR T ANT SAFETY INSTRUCTIONS www .bissell.com 800.237.7691 When using an electrical appliance, basic precautions should be observed, inc luding the following: READ ALL INSTRUCTIONS BEFORE USING YOUR BISSELL FLIP-EASE CORDLESS HARD FLOOR CLEANER.
4 www .bissell.com 800.237.7691 Spray T rigger On/Off Switch Dirty T ank Filter Dirty T ank Latch Clean T ank Charging Port Gentle Clean™ MicroFiber Pad Solution Hose Spray Tips (2) Dry V acuum Suction Path P roduct View ug603-6913_5288_606.indd 4 ug603-6913_5288_606.
5 www .bissell.com 800.237.7691 Assembling your new Flip-Ease is a 3 Step Process, requiring no tools. 1. Insert foot into body of unit until you hear a click. 2. Place the Solution T ube onto the spray connector . 3. Insert the handle into the body of the unit.
Dry Vac 1. Attach the Gentle Clean™ MicroFiber pad onto the base of the unit. Begin by attaching the pad onto the Velcro on one side of the unit, wrapping it under the foot and attaching on the other side Tip: If the MicroFiber covers the vacuum suction path, the unit will not suction.
7 www .bissell.com 800.237.7691 Switching from Dry Vac to Wet Mop 1. T o change from dr y vacuuming to wet cleaning simply flip the unit around! Wet Mop 1. By squeezing the trigger , you will turn off the vacuum suction. 2. Water and Solution will flow to the 2 spray tips on the Wet Mop side.
B attery Removal And Disposal 1. Important: Unplug charger . 2. Remove tanks (clean and dirty) and discard. 3. Remove screws (6) holding Product Housing together (see diagram). 4. Use screwdriver to score Rating Label on side of unit. 5. Separate Housings and locate Ba ttery Pack in bottom/ center of unit.
T roubleshooting Problems Possible Causes 1. No suction or unit will not turn on 1. Unit is not charged 2. No or low suction 2. Batteries are run down Filter Clogged Dirty T ank not properly installed MicroFiber pad covering suction path Clogged suction path Foot not properly installed 3 No Spray 3.
For information about repairs or replacement parts, or questions about your warranty , call: BISSELL Consumer Services 1-800-237-7691 Monday - Friday 8 a.m. — 10 p.m. EST Saturday 9 a.m. — 8 p.m. EST Or write: BISSELL HOMECARE, INC PO Box 3606 Grand Rapids MI 49501 A TTN: Consumer Services Or visit the BISSELL website - www .
R eplacement parts - BISSELL Flip-Ease™ Hard Floor Cleaner Y ou may purchase parts from your retailer , by calling BISSELL Consumer Services or by visiting our website. Below is a list of common replacement parts*. While not all of these parts may have come with your specific model, they are available for purchase if desired.
W arranty - BISSELL Flip-Ease™ This warranty gives you specific legal rights; and you may also have other rights which may vary from state to state. If you need additional instruction regarding this.
An important point after buying a device Bissell 5288 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bissell 5288 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bissell 5288 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bissell 5288 you will learn all the available features of the product, as well as information on its operation. The information that you get Bissell 5288 will certainly help you make a decision on the purchase.
If you already are a holder of Bissell 5288, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bissell 5288.
However, one of the most important roles played by the user manual is to help in solving problems with Bissell 5288. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bissell 5288 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
