Instruction/ maintenance manual of the product 3910 Bissell
Go to page of 20
USER’S GUIDE 3910 SERIES 220-240V Momentum Cyclonic BAGLESS V ACUUM 3 Safety Instructions Product View Assembly Operation Maintenance and Care T roubleshooting Consumer Services Replacement Parts 4 5-6 6-9 10-16 17 18 19 Warranty 20 ug603-2377_3910E_207.
2 T hanks for buying a BISSELL vacuum 2 www .bissell.com W e’re glad you purchased a BISSELL vacuum. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system. Y our BISSELL vacuum is well made, and we back it with a limited one year warranty .
3 www .bissell.com I MPOR T ANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should be observed, including the following: READ ALL INSTRUCTIONS BEFORE USING Y OUR UPRIGHT V ACUUM. W ARNING: T o reduce the risk of fire, electric shock, or injury: ■ Use indoors only .
4 www .bissell.com Handle T urboBrush ™ Power Switch Clean Filter Indicator (Select Models Only) Easy Empty ™ Dirt Container Headlight Height Adjustment Knob Foot Window W ashable Pre-Motor Filter.
5 www .bissell.com The only tool you’ll need to assemble your vacuum c leaner is a Phillips screwdriver . Attach handle to vacuum 1 . Locate the handle and cord wrap.
Attach vacuum hose and tools 1. Line up the tabs on the base of the T wist ‘n Snap hose with the corresponding notches on the hose collar as shown. 2. T urn the T wist ‘n Sna p hose to the left to lock the hose into place. 3. Connect the curved hose wand to the hose.
Handle positions Press the handle release pedal, located on the lower left side of the vacuum, with your foot to place your vacuum into one of three c leaning positions. 1. Upright – For storage and above floor cleaning with tools. 2. Normal Cleaning – Press handle release pedal once.
Clean filter indicator Select Models Only The clean filter indicator tells you when the airflow in your vacuum is reduced due to dirty filters or a clog in the hose. The clean filter indicator will remain green while the unit is running until the airflow is reduced by a clog or dirty filter .
Crevice T ool: Use in tight narro w spaces. Extension Wand: Use with desired attachment for a longer reach. Curved Hose Wand: Use with desired attachment for a longer reach or for cleaning hard to reach places. T urboBrush ™ : Use rota ting brush action for small areas such as stairs and upholstery .
T o maximize your cleaning performance and extend the life of your vacuum, it is very important that you empty your dirt container and check and clean your filters frequently . Perform the following maintenance steps: 1. Empty the dirt container when the dirt reaches the “Full” line on the container , or more frequently to prevent overfills.
1. Unplug the vacuum from electrical outlet. 2. The pre-motor filter protects the motor from dirt particles. It is located in the slide out tray underneath the dirt container . If the filter becomes dirty , pull out the tray , lift out the foam filter pad and clean it.
2 1 3 4 Check rotating floor brush and drive belt Y ou should check your vacuum c leaners rotating floor brush and drive belt regularly for wear or damage. Y ou should also clean the brush and brush ends of strings, hair and carpet fibers. This type of debris can wrap around the brush and hamper its ability to effectively clean your carpet.
13 www .bissell.com M aintenance and care Replace drive belt 1. Unplug the vacuum from electrical outlet. 2. With rotating floor brush removed from vacuum cleaner (Steps 1-4 of check rotating floor brush and drive belt), grasp old drive belt and remove from motor pulley .
14 www .bissell.com M aintenance and care Maintaining T urboBrush The T urboBrush should be checked regularly for clogs or debris wrapping around the brush.
15 www .bissell.com M aintenance and care Clearing clogs Low suction or poor pickup may be due to a clog in the vacuum c leaner . If you notice a change in the sound of the motor , check for c logs. 1. Unplug the vacuum from electrical outlet. 2. Empty dirt container .
16 www .bissell.com M aintenance and care Cleaning the upper tank 1. Unplug the vacuum from electrical outlet. 2. Remove the dirt container as instructed in "Empty Dirt Container" on page 10. 3. Using a short Phillips screwdriver , take off the separator plate by removing the two screws that secure it to the upper tank.
17 www .bissell.com T roubleshooting Vacuum c leaner won’t run Possible causes Remedies 1. Power cord not plugged in 1. Check electrical plug Vacuum c leaner and tools won’t pick up dirt Possible causes Remedies 1. Incorrect height adjustment 1. Adjust powerfoot to correct height 2.
18 www .bissell.com B ISSELL Consumer Services If your BISSELL product should require service: In the UK, Australia, or New Zealand, call BISSELL Consumer Services at the numbers below and we will give you the location of a BISSELL Authorized Ser vice Center in your area.
19 R eplacement parts Item P art No. Part Name 1 32074 Style 7/9/10/12/14 Drive Belt (2-Pack) 2 203-1297 Headlight Bulb 3 203-1063 Crevice T ool 4 203-1228 Dusting Brush/Upholstery T ool 5 203-2302 T .
16 www .bissell.com 800.237.7691 20 www .bissell.com W arranty - BISSELL Momentum Cyclonic Bagless Vacuum ©2007 BISSELL Homecare, Inc Grand Rapids, Michigan All rights reserved. Printed in Korea Part Number 603-2377 Rev 2/07 Visit our website at: www.
An important point after buying a device Bissell 3910 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bissell 3910 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bissell 3910 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bissell 3910 you will learn all the available features of the product, as well as information on its operation. The information that you get Bissell 3910 will certainly help you make a decision on the purchase.
If you already are a holder of Bissell 3910, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bissell 3910.
However, one of the most important roles played by the user manual is to help in solving problems with Bissell 3910. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bissell 3910 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
