Instruction/ maintenance manual of the product 3760 Bissell
Go to page of 16
USER’S GUIDE 3760 SERIES 220-240V Safety Instructions 3 Product Diagram 4 Assembly Instructions 4-6 Operation / Special T ools 6-9 Maintenance 10-13 T roubleshooting 14 Warranty 16 Replacement Parts 15 Consumer Services 15 ug603-5570_3760E_1105.indd 1 ug603-5570_3760E_1105.
2 Thanks For Buying A BISSELL Lift-Off ™ Spinpower We’re glad you purchased a BISSELL Lift-Off Spinpower vacuum. Everything we know about floor care went into the design and construction of this powerful, high-tech home vacuuming system.
3 IMPOR T ANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should be observed, including the following: READ ALL INSTRUCTIONS BEFORE USING Y OUR UPRIGHT V ACUUM. W ARNING: T o reduce the risk of fire, electric shock, or injury: ■ Use indoors only .
4 C AUTION: Do not plug in your vacuum cleaner until you are familiar with all instructions and operating pr ocedures. Power Switch Crevice T ool Handle Quick Release Cord Wrap Handle Release Pedal Po.
How T o Use This Guide This User’ s Guide has been designed to help you get the most satisfaction from your BISSELL Lift-Off Spinpower vacuum. Y ou’ll find assembly and operating instructions, safety precautions, as well as maintenance and troubleshooting instructions.
Snap the Metal T elescoping Extension Wand, Crevice T ool, and Combination T ool into storage clips as shown. On Board T urboBrush ™ (Select Models Only) The T urboBrush Bracket slides onto the Hanger on the front of the Handle.
The Powerfoot on your BISSELL Lift-Off Spinpower vacuum can be adjusted to clean several floor surfaces. NOTE: For optimal c leaning performance, adjust to the lowest practical setting. If your cleaner is difficult to push, adjust to the next higher setting.
T urboBrush ™ (Select Models) : Use rotating brush action for small areas such as stairs and upholstery . Note: Press gently when using T urboBrush to gain maximum cleaning. T oo much pressure could cause the brush to stop rotating. Deluxe Bare Floor T ool (Select Models): Use for bare floors.
9 Select Models Only The Shoulder Strap may be used while cleaning with the Detachable Cylinder . T o attach the Shoulder Stra p, wrap the V elcro ends attached to the bottom of the strap securely around the Cylinder handle as shown. T o obtain maximum strength, overlap the loose ends completely and press securely in place.
Upper T ank Knob T o maintain maximum cleaning performance, the following maintenance steps must be performed: Empty the Dirt Container when the dirt reaches the “Full” line on the front. Check the Upper T ank and Pre-Motor Filters at least once a month and clean and replace as needed.
Use only BISSELL Style 8 Replacement Filters in your BISSELL Lift-Off Spinpower . Unplug the vacuum from electrical outlet. The Pre-Motor Filter protects the motor from dirt partic les. It is located in the slide out tray underneath the Dirt Container .
Place one end of the new Drive Belt over Motor Pulley and the other end over the Brush in the space between the bristles. Pull the Brush firmly to stretch the Drive Belt and place ends of Brush down into slots on sides as shown. T urn Brush several times by hand to center the Drive Belt.
Low suction or poor pickup may be due to a clog in the vacuum cleaner . If you notice a change in the sound of the motor or a reduction in the spinning action, check for clogs. Unplug cleaner from electrical outlet. Empty Dirt Container . Check Upper T ank for build up or clogs.
Vacuum c leaner won’t run P ossible Causes Remedies Power cord not plugged in Check electrical plug Thermal protector activated Allow cleaner to cool for 30 minutes, see pg.
15 Replacement P arts – BISSELL Lift-Off Spinpower Series BISSELL Consumer Services 1 2 3 456 7 Item Part No. Part Name 1 3200 Style 8 Drive Belt (2-Pack) 2 203-1063 Crevice T ool 3 203-1099 Dusting.
Warranty 16 This warranty gives you specific legal rights, and you may also have other rights which may var y from country to countr y . If you need additional instruction regarding this warranty or h.
An important point after buying a device Bissell 3760 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bissell 3760 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bissell 3760 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bissell 3760 you will learn all the available features of the product, as well as information on its operation. The information that you get Bissell 3760 will certainly help you make a decision on the purchase.
If you already are a holder of Bissell 3760, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bissell 3760.
However, one of the most important roles played by the user manual is to help in solving problems with Bissell 3760. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bissell 3760 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
