Instruction/ maintenance manual of the product 18PO Bissell
Go to page of 16
USER’S GUIDE 18P0 SERIES 43Z3 SERIES 3 Safety Instructions Product View Assembly Operation Maintenance and Care T roubleshooting Consumer Services Replacement Parts 4 5-6 6-9 10-12 13 14 15 Warranty 16 Garage Pro ™ V ACUUM ug110-4046_18P0_408.indd 1 ug110-4046_18P0_408.
2 T hanks for buying a BISSELL vacuum 2 www .bissell.com 800.237.7691 W e’re glad you purchased a BISSELL Garage Pro™ vacuum. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system.
3 I MPOR T ANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should be observed, inc luding the following: READ ALL INSTRUCTIONS BEFORE USING Y OUR GARAGE PRO V ACUUM. Always connect to a polarized outlet (left slot is wider than right).
4 www .bissell.com 800.237.7691 W et/Dry Hose Inlet Blower Hose Outlet Dirt T ank Face Plate Power Switch Power Cord Slots Muffler Dirt T ank Handles P roduct view ug110-4046_18P0_408.
5 www .bissell.com 800.237.7691 Y our unit will require no tools to put together . 1 . Remove the dirt tank by pulling up on both handles to unlatch. Lift upper half of unit to remove. 2 . Remove all accessories and parts stored in the bottom of the tank prior to use.
Mounting & installation continued Concrete Wall (f asteners not included) Y ou will need; (4) 3/8” x 2-1/4” concrete sleeve anchors. 1 . Drill a 3/8” x 1-3/4” hole with a masonr y drill bit. 2 . Insert a bolt and anchor sleeve into the hole.
Wet or dry vacuuming mode 1. Attach hose to the wet/dry hose inlet opening (located on the front left side of the unit) by pushing fitted end of hose and turning clockwise until you feel it is secure. 2. Attach extension wand, if desired, to end of hose by pushing it firmly into the hose.
Thermal motor protection: An internal thermal protector has been designed into your cleaner to protect it from overheating. When the thermal protector activates, the main vacuum motor will stop operating. If this happens, proceed as follows. 1. T urn the vacuum OFF and unplug from electrical outlet.
Floor cleaning (2) Extension wands Use with desired attachment for a longer reach. Large area cleaning tool Use on large surfaces for maximum pick up . Multi surface floor tool May be used on both carpet/rugs or hard floor surfaces. For use on carpets, make sure the tab is in the down position .
10 www .bissell.com 800.237.7691 M aintenance and care Cleaning the dirt tank 1. Unplug the unit from electrical outlet. 2. Remove the dirt tank by pulling up on both handles to unlatch. 3. Ensure the dirt tank has been emptied. 4. The dirt tank may be washed in warm water .
11 www .bissell.com 800.237.7691 M aintenance and care Cleaning the filters continued Secondary filter 1. The secondary filter is loca ted above the primary filter . 2. T o remove the primary filter , see instructions on page 10. 3. T o remove the secondar y filter , pull filter down and out.
M aintenance and care 12 www .bissell.com 800.237.7691 Clearing clogs continued If the clog is contained near the bottom of the hose (close to where tools are attached), follow these steps: 1. Remove wand or tool. 2. Attach hose to the blower outlet and turn the power on.
13 www .bissell.com 800.237.7691 T roubleshooting Vacuum c leaner won’t turn on Possible causes Remedies 1. Power cord not plugged in 1. Check electrical plug 2. Blown fuse/tripped breaker in home 2. Check/replace fuse or reset breaker 3. Thermal protector activated 3.
14 www .bissell.com 800.237.7691 For information about repairs or replacement parts, or questions about your warranty , call: BISSELL Consumer Services 1-800-237-7691 Monday - Friday 8 a.m. — 10 p.m. ET Saturday 9 a.m. — 8 p.m. ET Or write: BISSELL Homecare , Inc .
16 www .bissell.com 800.237.7691 15 R eplacement parts - BISSELL Garage Pro™ Vacuum Y ou may purchase parts from your retailer , by calling BISSELL Consumer Services or by visiting our website.
16 www .bissell.com 800.237.7691 16 www .bissell.com 800.237.7691 W arranty - BISSELL Garage Pro™ Vacuum This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state.
An important point after buying a device Bissell 18PO (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bissell 18PO yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bissell 18PO - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bissell 18PO you will learn all the available features of the product, as well as information on its operation. The information that you get Bissell 18PO will certainly help you make a decision on the purchase.
If you already are a holder of Bissell 18PO, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bissell 18PO.
However, one of the most important roles played by the user manual is to help in solving problems with Bissell 18PO. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bissell 18PO along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
