Instruction/ maintenance manual of the product 1400 Bissell
Go to page of 12
Safety Instructions 3 Product View This Guide / Features / Special T ools Assembly / Operation Clean-Up/Storage T roubleshooting 4 5-6 7-8 9 10 11 About Y our Warranty 12 USER’S GUIDE LITTLE green .
Thanks for buying a BISSELL Little Green ® We’re glad you purchased a BISSELL Little Green ® Compact Deep Cleaner . Everything we know about floor care went into the design and construction of this handy , high-tech home cleaning system. Y our BISSELL Little Green is well made, and we back it with a limited one-year warranty .
IMPOR T ANT SAFETY INSTRUCTIONS ■ Do not use LITTLE GREEN ® if it has been dropped, damaged, left outdoors or dropped into water . Have it repaired at an Authorized Service Center . ■ Unplug by grasping the plug, not the cord. Do not unplug by pulling on cord.
1. Clean/Solution T ank 3. Dirty/Collection T ank 11. Quick release Cord Wrap 12. Power Cord 8. Vacuum Flex Hose with Spray T rigger 4. Built-In Heater Switch* *Select Models only 2. Power Switch 5. Heat Indicator Light* *Select Models only 6. Flex Hose Clip 10.
Please read this Guide thoroughly before assembling your cleaner . P ay particular attention to the product diagram, assembly instructions, and part names. Begin by locating and organizing all parts before assembly . Familiarize yourself with the parts and where they go.
Quick Release Cord Wrap. T o remove the Power Cord, gently twist/rotate the Quick Release Cord Wrap clockwise. Power Cord. The Power Cord, with a three-prong plug, stores on the back of the Little Green by wrapping around the Quick-Release Cord Wrap. NOTE: Unwrap the Power Cord completely before operating the unit.
There is only one step required for assembly . T ake the Flex Hose Clip and slide the back plate into the opening on the front of the unit. Y ou will hear a “snap” when it is locked in place. * Optional on some models. If your unit comes with a T urboBrush, you will need to attach the T urboBrush Clip.
Press Power Switch to ON Position. NOTE: If your unit has a built-in heater (not stan- dard on all models), first turn the black power switch to “ON,” then the red heater switch to “ON”. Within 30 seconds, the Heat Indicator light will illuminate (# 5 in diagram), indicating the heater has reached the proper temperature.
T urn Power Switch to OFF position. Note: If your unit has a Built In Heater turn the Heater Switch off. Unplug Power Cord from outlet. Note: If a significant amount of Little Green formula/water remains, it is all right to leave it in the Clean/Solution T ank for your next cleaning task.
T roubleshooting Cleaner won’t run. P ossible Causes Remedies Power cord not plugged in Check electrical plug Blown fuse/tripped breaker Replace household fuse or reset breaker Reduced spray or no spray .
Replacement P arts Item P art No. P art Name 1 203-5002 4” Upholster y/Carpet T ool w/Brush - Dusk 2 203-0961 4” Window 3 203-0984 4” Removable Brush 4 203-5003 6” Upholster y/Carpet T ool w/B.
About Y our W arranty This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. If you need additional instruction regarding this warranty or have questions regarding what it may cover , please contact BISSELL Consumer Services by e -mail, telephone, or regular mail as described below .
An important point after buying a device Bissell 1400 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bissell 1400 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bissell 1400 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bissell 1400 you will learn all the available features of the product, as well as information on its operation. The information that you get Bissell 1400 will certainly help you make a decision on the purchase.
If you already are a holder of Bissell 1400, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bissell 1400.
However, one of the most important roles played by the user manual is to help in solving problems with Bissell 1400. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bissell 1400 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
