Instruction/ maintenance manual of the product 100 Binatone
Go to page of 2
2.Charging the battery pack Plug the mains adaptor into a 230V AC ,50Hz main socket with the switch on the socket set to OFF . Then switch ON the main socket. Battery Life The PMR has a built in power saver feature to make the batteries last longer . But when you are not using the PMR , it's better to switch it off to save the battery power.
T o clean your PMR watch, use a soft cloth dampened with water. Do not use cleaners or solvent , which may cause damage which may not covered by guarantee. 5. Cleaning and care Operating frequency 446.00625 to 446.09375 MHz(eight channels) Channel spacing 12.
An important point after buying a device Binatone 100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Binatone 100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Binatone 100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Binatone 100 you will learn all the available features of the product, as well as information on its operation. The information that you get Binatone 100 will certainly help you make a decision on the purchase.
If you already are a holder of Binatone 100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Binatone 100.
However, one of the most important roles played by the user manual is to help in solving problems with Binatone 100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Binatone 100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
