Instruction/ maintenance manual of the product SP-200E ZyXEL Communications
Go to page of 11
SP-200E S tatement Printer User ’ s Guide V ersion 1.00 7/2006 Edition 1 Copyright © 2006 ZyXEL Co mmunications Corporation. All rights reserved..
2 SP-200E User’s Start Guide 1 Introducing the SP-200E The SP-200E is a 2-inch thermal printer with an integ rated, easy-to-use, push-button control panel. It lets you generate subscriber accounts and print account information with the push of a button.
SP-200E User’s Start Guide 3 T able 1 Rear Panel Hardware 2.2 Rear Panel 1 Reset button 2 Power switch 3 DC power socket 4 Ethernet port (RJ-45) 5 PS/2 keypad port Label Description RST Press this button for 10 seconds to restor e the factory default setti ngs.
SP-200E User’s Start Guide 4 2.3 Front Panel Push-Buttons Push the power switch to ON . The buttons on the front panel light up when th e statement printer is receiving power . The following table descri bes push-button’s LED st atus and functions.
SP-200E User’s Start Guide 5 4 Web Configurator The web configurator allows you to change the SP-2 00E ’s IP address or encryption key . Y ou should also change the SP-200E’s password. 4.1 W eb Configurator Login Follow the steps below to access and use the web configurator .
SP-200E User’s Start Guide 6 • Click Setup to log in if you want to configure the SP-200E (see section 4.2 ). • Click Firmware Upgrade if you want to upload firmware (see section 4.3 ). Note: The SP-200E automatically logs you out if there is no activity for longer than five minutes after you log in.
SP-200E User’s Start Guide 7 T able 3 Setup Screen 4.3 Firmware Upload T o upgrade the firmware, you first have to download the la test firmware from www .zyxel.com and then use the web configurator to upload it to the SP-200E. The firmware will include the device name (SP- 200E) and end with a .
SP-200E User’s Start Guide 8 After you enter the user name and password and click Firmwar e Upgrade in the login screen, you need to wait a moment and click Continue to display the Firmware Upgrad e screen.
SP-200E User’s Start Guide 9 Paper Width 58(+0/-1) mm Printing Width 48 mm Paper Length 50 m max. Number of S tatements Per Paper Roll A single account statement is around 15 cm in length. Y ou should be able to print about 333 account statements on a 50 m paper roll.
SP-200E User’s Start Guide 10 6 T r oubleshooting T able 5 Troubleshooting 7 Safety W arnings • Do NOT use this product near water , for exampl e, in a wet basement or near a swimming pool. • Do NOT expose your device to dampness, dust or corrosive liquids.
SP-200E User’s Start Guide 11 • Never disassemble the printer or the adapter . • Do NOT attempt to repair the power adaptor or cord . Contact your local vendor to order a new one. • Do not use the device ou tside, and make sure all the co nnections are indoors.
An important point after buying a device ZyXEL Communications SP-200E (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ZyXEL Communications SP-200E yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ZyXEL Communications SP-200E - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ZyXEL Communications SP-200E you will learn all the available features of the product, as well as information on its operation. The information that you get ZyXEL Communications SP-200E will certainly help you make a decision on the purchase.
If you already are a holder of ZyXEL Communications SP-200E, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ZyXEL Communications SP-200E.
However, one of the most important roles played by the user manual is to help in solving problems with ZyXEL Communications SP-200E. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ZyXEL Communications SP-200E along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
