Instruction/ maintenance manual of the product GS-2024 ZyXEL Communications
Go to page of 9
NetAtlas Enterprise Ethernet Switch Manager Quick S t art Guide V ersi on 1.01 9/2005 EMS_Switch_V1-01.fm Page 1 Fr iday, September 30, 2005 3 :20 PM.
NetAtlas Enterprise Ethernet Swi tch Manager 2 1 Introduction The NetAtlas Enterprise Eth ernet Switch Manager is an Element Management System (EMS) that re trieves man agement informa tion from switches using the SNMP protoco l. The EMS allows you to manage multiple switches from a central location.
NetAtlas Enterprise Ethernet Swi tch Manager 3 2.2 EMS Inst allation Overview The following give s an overview of what you need to do to install the EMS: 1 Install SNMPc. See the documentat ion that comes with your SNMPc for information. 2 Install the EMS.
NetAtlas Enterprise Ethernet Swi tch Manager 4 5 T ype your name and company name in the following screen . Click Next to continue. 6 Y ou must select th e same dir ectory where you installed SNMPc. Click Browse if it’s dif ferent from the destination folder shown.
NetAtlas Enterprise Ethernet Swi tch Manager 5 4 SNMPc Network Manager St artup S tart the SNMPc Network Manag er manually (from the Windows Star t menu) or have it start automatically each time you turn on your computer .
NetAtlas Enterprise Ethernet Swi tch Manager 6 • zyxel-gs2024.mib 4 Click OK . 5 Click Compile in the Compile Mibs screen. 6 Click Ye s when asked to confirm, then click OK .
NetAtlas Enterprise Ethernet Swi tch Manager 7 7 Using SNMP Check that you are using SNMP V ers ion 2c (SNMPv2c). If you are not using SNMPv2c, you must uninstall any previous versions and install SNMPv2c. Refer to RFC 1901 for more information on SNMPv2c.
NetAtlas Enterprise Ethernet Swi tch Manager 8 8 Accessing NetAtlas Follow the steps below to a ccess NetAtlas. 1 In the SNMPc main screen, double-click the switch icon to view the Switch Manager . 2 A screen displays as shown. Double-click the Switc h Manager icon to access the main EMS configuration screen.
NetAtlas Enterprise Ethernet Swi tch Manager 9 • Check that the ODBC driver is correctly configured; see Section 9.1 on pa ge 9 . • Ma ke sure that PostgreSQ L is running. • Make sure that the computer you have installed the EMS on, is connected to the network where the switch is located.
An important point after buying a device ZyXEL Communications GS-2024 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ZyXEL Communications GS-2024 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ZyXEL Communications GS-2024 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ZyXEL Communications GS-2024 you will learn all the available features of the product, as well as information on its operation. The information that you get ZyXEL Communications GS-2024 will certainly help you make a decision on the purchase.
If you already are a holder of ZyXEL Communications GS-2024, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ZyXEL Communications GS-2024.
However, one of the most important roles played by the user manual is to help in solving problems with ZyXEL Communications GS-2024. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ZyXEL Communications GS-2024 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
