Instruction/ maintenance manual of the product ES1100 ZyXEL Communications
Go to page of 30
www .zyxel.com www .zyxel.com ES1 100 Series 8/16/24 Port Unmanaged Fast Ethernet Switch With PoE/GbE Option Copyright © 201 1 ZyXEL Communications Corporation V ersion 1.
.
About This User's Guide ES1100 Series User’s Guide 3 About This User's Guide Intended Audience This manual is intended for people who want to use and install the S witch. Documentation Feedback Send your comments, questions or suggestions to: techwriters@zyxel.
About This User's Guide ES1100 Series User’s Gui de 4 Customer Support Should problems arise that cannot be solved by the methods listed above, y ou should contact y our vendor . If you cannot contact y our vendor , then contact a Z yXEL office for the region in which you bought the device.
Document Conventions ES1100 Series User’s Guide 5 Document Conventions W arnings and Notes These are how warnings and notes are shown in this User’ s Guide.
Safety Warnings ES1100 Series User’s Gui de 6 Safety Warnings • Do NOT use this pro duct near water , for example, i n a wet basement or near a swimming pool. • Do NOT expose y our device to da mpness, dust or c orrosive liquids. • Do NOT stor e things on the device.
Table of Contents ES1100 Series User’s Guide 7 Table of Contents About This User's Guide ................................................. ..................................................... .... 3 Document Conventions .......................
Table of Contents ES1100 Series User’s Gui de 8.
ES1100 Series User’s Guide 9 C HAPTER 1 Getting to Know Your Switch 1.1 Overview This User’s Guide covers the following models: ES1100-8P , ES1100-16, ES 1100-16P , ES1 100-2 4, ES1100-24E, and ES1100-24G. The Switch can be used to build high-performance switched workgroup networks.
Chapter 1 Getting to Know Your Switch ES1100 Series User’s Gui de 10 Figure 1 Front P anel The Switch has a built -in algorithm that automatically assigns priority to received packets. 1.2 Features The following are the essential features of the Switch.
Chapter 1 Getting to Know Your Switch ES1100 Series User’s Guide 11 • Auto-negotiating Ethernet RJ-45 ports (ES11 00-8P and ES1100-16P include FE P oE ports). • Auto-sensing crossover for all RJ-45 ports. • Supports N-W ay protocol for speed (10/100/1000 Mbps) and duple x mode (Half/F ull) auto- detection.
Chapter 1 Getting to Know Your Switch ES1100 Series User’s Gui de 12 1.3.2 Bridging With its large address table and high performance, the Switch is an ideal solution for department networks to connect to the corporate backbon e or for connecting network segments.
ES1100 Series User’s Guide 13 C HAPTER 2 Hardware Description and Connection 2.1 Rear Panel The three-pronged power receptacle is located on the rear panel of the Switch.
Chapter 2 Hardware Description and Connection ES1100 Series User’s Gui de 14 2.1.1 Rear Panel Power Connection Connect one end of the supplied power cord to the power receptacle on the back of the Switch and the other end to the appropriate power source.
Chapter 2 Hardware De scription and C onnection ES1100 Series User’s Guide 15 2.2.3 Front Panel LEDs The LED Indicators give real-time information abou t the status of the S witch. The following tables provide descriptions of the LEDs. Figure 6 LEDs for ES1100-16/24/ 24E The followi ng table descri bes the LEDs .
Chapter 2 Hardware Description and Connection ES1100 Series User’s Gui de 16 Figure 8 LEDs for ES1100-24G The follow ing table descr ibes the LEDs . 2.
Chapter 2 Hardware De scription and C onnection ES1100 Series User’s Guide 17 Note: Ask an authorized technician to att ach the Switch to the r ack/w all. For ES1100-8P/16/16P/24E, you can place the Switch directly on top of your desk or have it rack - mounted.
Chapter 2 Hardware Description and Connection ES1100 Series User’s Gui de 18 2.3.2 Rack Mounting The Switch can be mounted on an EIA standard size, 19-inch rack or in a wiring closet with other equipment. Follow the steps below to mount your Switch on a stan dard EIA rack using a r ack - mounting kit.
Chapter 2 Hardware De scription and C onnection ES1100 Series User’s Guide 19 2.3.3 Mounting the Switch on a Rack 1 Po sition a mounting bracket (that is already attach ed to the Switch) on one side of the r ack, lining up the two screw holes on the brack et with the screw holes on the side of the r ack.
ES1100 Series User’s Guide 20 C HAPTER 3 Troubleshooting This section describes common problems you may encounter with the S witch and possible solutions. T roubleshoot the Switch using the LEDs to detect problems. The PWR LED on the front panel does not light up.
Chapter 3 Troubleshoo ting ES1100 Series User’s Guide 21 3.1 Improper Network Cabling and T opology Improper network cabling or topology setup is a common cause of poor network performance or even network failure.
Chapter 3 Troubleshoo ting ES1100 Series User’s Gui de 22.
ES1100 Series User’s Guide 23 C HAPTER 4 Product Specifications These are the product specifications. T able 7 Product Specifications Dimension ES1100-8P/16P: 265mm(W) x 184mm(D) x 44mm(H) ES1100-16.
Chapter 4 Product Specific at ions ES1100 Series User’s Gui de 24 T ransmission Mode 10/100 Mbps: Fu ll-duplex, Half -duplex 10/100/1000 Mbps: Ful l-duplex, Half -duplex (ES1100-24G only) Data Forw .
ES1100 Series User’s Guide 25 A PPENDIX A Legal Information Copyright Copyright © 2011 by Z yXEL Communications Corporation. The contents of this publication may not be repr oduced in any part or a.
Appendix A Legal Information ES1100 Series User’s Gui de 26 Notices Changes or modifications not expressly approved by the part y responsible for compliance could void the user's authority to operate the equipment. Viewing Certifications 1 Go to http://www .
Index ES1100 Series User’s Guide 27 Index A Applications 11 Segment Bridge 12 auto-negotiating ports 14 C Cabling Length 21 certifications 25 notices 26 viewing 26 copyright 25 D Data path loop 21 d.
Index ES1100 Series User’s Gui de 28 Standalone W orkgroup 11 syntax conv entions 5 T Tr o u b l e s h o o t i n g Improper Network Cabling and T opology 21 W wall mounting 17 warranty 26 note 26.
Index ES1100 Series User’s Guide 29.
Index ES1100 Series User’s Gui de 30.
An important point after buying a device ZyXEL Communications ES1100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ZyXEL Communications ES1100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ZyXEL Communications ES1100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ZyXEL Communications ES1100 you will learn all the available features of the product, as well as information on its operation. The information that you get ZyXEL Communications ES1100 will certainly help you make a decision on the purchase.
If you already are a holder of ZyXEL Communications ES1100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ZyXEL Communications ES1100.
However, one of the most important roles played by the user manual is to help in solving problems with ZyXEL Communications ES1100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ZyXEL Communications ES1100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
