Instruction/ maintenance manual of the product 2110 ZyXEL Communications
Go to page of 22
www .zyxel.com www .zyxel.com User ’ s Guide Z-W ave Series S H D 111 0 / 1111 / 2 11 0 / 3 11 0 Copyright © 201 1 ZyXEL Communications Corporation Edition 1, 7/2011.
.
About This User's Guide Z-Wave Series Programming Guide 3 About This User's Guide Intended Audience This manual is intended for people who want to configure the Z -W av e Series products. Related Document ation •Q u i c k S t a r t G u i d e The Quick Start Guide is designed to help y ou get up and running right aw ay .
Safety Warnings Z-Wave Series Programming Guide 4 Safety Warnings • Do not dispose of electrical applianc es as unsorted municipal waste, use separate collection faciliti es. • Contact your local gov ernment for informatio n regarding the collection sys tem s available.
Table of Contents Z-Wave Series Programming Guide 5 Table of Contents About This User's Guide ................................................................................. ....................... .. 3 Document Conventions ....................
Table of Contents Z-Wave Series Programming Guide 6 4.2.2 Grouping 2 .......... ... .... ... ... ... .... ... ... ... ............. ... .... ... ... ... .... ... ... ... ............. ... .... ... ... ... .... 18 4.2.3 Z-Wave’ s Configuration ......
Z-Wave Series Programming Guide 7 C HAPTER 1 The Z-Wave Series 1.1 Overview This User’s Guide provides progr amming methods for the Z -W ave Controller which controls each Z - W ave Series device and unifies them into a Z -W ave network to control y our home electronics.
Z-Wave Series Programming Guide 8 C HAPTER 2 SHD1110 Programming 2.1 Z-W ave Group s (Associat ion Command Class V ersion 2) On the Z -W ave Controller , you can set the SHD1110 to send reports of its.
Chapter 2 SHD1110 Programming Z-Wave Series Programming Guide 9 T emperature (Celsius) The following parameters are used in this example: Sensor V alue 1 = 0x01 Sensor V alue 2 = 0x31 T emperature (C)= (Sensor V alue 1*2 56 + Sensor Value 2)/10 = (1*256+49)/10 = 30.
Chapter 2 SHD1110 Programming Z-Wave Series Programming Guide 10 When the SHD1110 is triggered, it will send out BASIC_SET_COMMAND to the nodes of Grouping 2. R efer to the Z- W av e’ s Configuration section to configuration par ameter 1 for the setting of basic set command.
Chapter 2 SHD1110 Programming Z-Wave Series Programming Guide 11 Note: Once the SHD1110 is reset, it wi ll be restored to its factory default status and settings. 2.1.4 Auto Report 2.1.4.1 Time Interval Y ou can set the SHD1110 to automatically send out reports of its current status to Grouping 1 at a set time.
Chapter 2 SHD1110 Programming Z-Wave Series Programming Guide 12 2.1.5 W akeup Configuration The SHD1110 stays in sleep status for the majority of time in order to conserve battery power . However , it can be waken up by either triggers of temper ature/humidit y or set time for the Z - W ave Controller to enable further settings.
Z-Wave Series Programming Guide 13 C HAPTER 3 SHD1111 Programming 3.1 Z-W ave Group (Associat ion Command Class V er sion 2) The SHD1111 supports one association group with fi ve nodes. When the SHD1111 is triggered, all devices associated with the SHD1111 will receive the relevant reports.
Chapter 3 SHD1111 Programming Z-Wave Series Programming Guide 14 0: OFF 1-99: ON (Binary S witch Device) Dim Level (Multilevel Switch Device) 3.1.3.2 Configur ing the OFF Delay Configuration P ar ameter #2 can adjust the time of delay before the OFF command is transmitted.
Chapter 3 SHD1111 Programming Z-Wave Series Programming Guide 15 3.2.3 Command Classes The SHD1111 supports the following Command Classes: • COMMAND_CLASS_SENSOR_BINARY • COMMAND_CLASS_BASIC • C.
Z-Wave Series Programming Guide 16 C HAPTER 4 SHD2110/3110 Programming 4.1 Basic Command Class / Bi nary Switch Command Cl ass The SHD2110/3110 responds to BASIC and BINARY commands of the Z- W ave system.
Chapter 4 SHD2110/3 110 Programmi ng Z-Wave Series Programming Guide 17 4.2 Z-W ave Group s (Associat ion Command Class V ersion 2) On the Z- W ave Controller , you can set the SHD2110/3110 to send it.
Chapter 4 SHD2110/31 10 Programming Z-Wave Series Programming Guide 18 4.2.1.4 Meter Report Command The SHD2110/3110 will report its instant powe r consumption to Grouping 1. For detailed description of meter report command, refer to page 4. 4.2.2 Grouping 2 Grouping 2 includes the BASIC_SET commands.
Chapter 4 SHD2110/3 110 Programmi ng Z-Wave Series Programming Guide 19 4.2.3.3 Meter Report Perio d (SHD31 10 only) If the Meter Report is set to 30 second s , the SHD2110/3110 will report its instant power consumption Z -W ave Controller in every 30 seconds.
Chapter 4 SHD2110/31 10 Programming Z-Wave Series Programming Guide 20 Accumulated power consumption (KW/h) = (Meter V alue 2*65536) + (Meter V alue 3*256) + (Meter V alue 4) = 70.
Z-Wave Series Programming Guide 21 A PPENDIX A Legal Information Copyright Copyright © 2011 by Z yXEL Communications Corporation. The contents of this publication may not be repr oduced in any part o.
Appendix A Legal Information Z-Wave Series Programming Guide 22 Notices Changes or modifications not expressly approved by the part y responsible for compliance could void the user's authority to operate the equipment. This Class B digital apparatus complies with Canadian ICES-003.
An important point after buying a device ZyXEL Communications 2110 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ZyXEL Communications 2110 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ZyXEL Communications 2110 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ZyXEL Communications 2110 you will learn all the available features of the product, as well as information on its operation. The information that you get ZyXEL Communications 2110 will certainly help you make a decision on the purchase.
If you already are a holder of ZyXEL Communications 2110, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ZyXEL Communications 2110.
However, one of the most important roles played by the user manual is to help in solving problems with ZyXEL Communications 2110. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ZyXEL Communications 2110 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
