Instruction/ maintenance manual of the product TH106 Zyliss
Go to page of 4
Please note: the TH106 comes factory set in baseboard mode. If using the TH106 to control a fan-forced heater, you must change the setting. To change the setting: The configuration switches are on the back of the thermostat. Change factory setting SW3 to the ‘ON’ position (15 minute cycle length).
1/'1!--!",%(%1-/23 !3.
# # 85.
' ' #?<4?.
An important point after buying a device Zyliss TH106 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zyliss TH106 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zyliss TH106 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zyliss TH106 you will learn all the available features of the product, as well as information on its operation. The information that you get Zyliss TH106 will certainly help you make a decision on the purchase.
If you already are a holder of Zyliss TH106, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zyliss TH106.
However, one of the most important roles played by the user manual is to help in solving problems with Zyliss TH106. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zyliss TH106 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
