Instruction/ maintenance manual of the product MV600SPE Billy Goat
Go to page of 26
Part No 840245 1 Form No F060711D BILLY GOAT ® MV650SPH and MV600SPE Self-Propelled Vacuum Owner’s Manual Accessories Caster Kit Hose Kit Bag Liner Kit Felt Bag Kit Use on hard surface for maneuverability. For vacuuming hard to reach areas. To collect leaves, thatch, and grass.
Part No 840245 2 Form No F060711D MV650SPH Self-Propelled Vacuum Owner’s Manual CONTENTS Specifications and So und/Vibrat ion ........................................................................................... ........................ 3 Instruction Labels .
Form No F060711D 3 Part No 840245 MV650SPH Self-Propelled Vacuum Owner’s Manual MV 650 SERIES SPECIFICATIONS MV650SPH MV600SPE Engine Type Honda GSV190AA1A Briggs and Stratton 122MO70110F1 Horsepower 6.5 (4.85 kW) 6.25 (4.66 kW) Fuel Capacity 1.6 qt (1.
Part No 840245 4 Form No F060711D MV650SPH Self-Propelled Vacuum Owner’s Manual INSTRUCTION LABELS The labels shown below were in stalled on your BILLY GOAT ® MV Vacuum. If any labels are damaged or missing, replace them before operating this equipment.
Form No F060711D 5 Part No 840245 MV650SPH Self-Propelled Vacuum Owner’s Manual MV Vacuum Assembly Drawing.
Part No 840245 6 Form No F060711D MV650SPH Self-Propelled Vacuum Owner’s Manual PARTS LIST.
Form No F060711D 7 Part No 840245 MV650SPH Self-Propelled Vacuum Owner’s Manual ASSEMBLY INSTRUCTIONS Your BILLY GOAT ® MV Vacuum was ship ped in one carton, completely assembl ed except for the Hood/Upper Handle Assembly.
Part No 840245 8 Form No F060711D MV650SPH Self-Propelled Vacuum Owner’s Manual 4. Attach upper handle brace to lower handle u sing corresponding hardware. Then repe at this step on the other side. - Two 1/2” wrenches. 5. Attach rod end (164) to the nozzl e door rod then secure in place by tightening jam nut.
Form No F060711D 9 Part No 840245 MV650SPH Self-Propelled Vacuum Owner’s Manual OPERATION O PERATOR C ONTROLS The operator’s position is at t he rear of the machine between the handlebars. The operat or should STAND in a position to allo w both handlebars to be graspe d firmly, which allows sufficient leve rage to steer the machin e.
Part No 840245 10 Form No F060711D MV650SPH Self-Propelled Vacuum Owner’s Manual 3. Secure the unit with left hand at the handle then pull starter rope with right hand to start engine. PULL STARTER CORD slowly until resistance is felt. Then pull cord rapidly to avoid kic kback.
Form No F060711D 11 Part No 840245 MV650SPH Self-Propelled Vacuum Owner’s Manual V ACUUM N OZZLE D OOR A DJUSTMENT The vacuum nozzle door adjust s for the maximum performance under various a pplications. Nozzle fully opened. This is ideal for turf application Nozzle half way opened.
Part No 840245 12 Form No F060711D MV650SPH Self-Propelled Vacuum Owner’s Manual V ACUUMING O PERATION This machine is desi gne d for vacuuming leaves, gras s clippings, and other type s of organic litter. Debris mixed with cans, bottles, and sma ll amounts of sand can be vacuumed; however, it is not this machine's primary purpose.
Form No F060711D 13 Part No 840245 MV650SPH Self-Propelled Vacuum Owner’s Manual C LEARING A C LOGGED N OZZLE DISCONNECT spark plug wire before servicing unit. 1. Shut engine off and wait for impeller to stop completely. 2. Disconnect spark plug wire.
Part No 840245 14 Form No F060711D MV650SPH Self-Propelled Vacuum Owner’s Manual MAINTENANCE P ERIODIC M AINTENANCE Periodic maintenance should be perfo rmed at the following intervals: Maintenance Operation Every Use Daily or Every 5 Hours Every 25 Hours Every 50 Hours Every 100-150 Hours Inspect for worn or damaged parts.
Form No F060711D 15 Part No 840245 MV650SPH Self-Propelled Vacuum Owner’s Manual I MPELLER R EMOVAL READ all safety instructions before servicing unit.
Part No 840245 16 Form No F060711D MV650SPH Self-Propelled Vacuum Owner’s Manual cable adjustment 4" from handle Ti ght en Loosen Procedure: 1. Wait for engine to c ool and DISCONNECT SPARK PLUG! 2. Engage the clutch lever then pull the unit back until it stops freewheeling.
Form No F060711D 17 Part No 840245 MV650SPH Self-Propelled Vacuum Owner’s Manual I NSTALLING N EW D RIVE C HAIN /A LIGNMENT /T ENSION READ all safety instructions before servicing unit. DISCONNECT spark plug wire before servicing unit. Tools r equired: - 7/16” and 1/2” socket.
Part No 840245 18 Form No F060711D MV650SPH Self-Propelled Vacuum Owner’s Manual W IRING D IAGRAMS Bag Switch Circuit Schematic Diagram TROUBLESHOOTING Problem Possible Cause Solution W ill not vacuum or ha s poor v acuum performance. · Dirty or full debris bag or filter.
Form No F060711D 19 Part No 840245 MV650SPH Self-Propelled Vacuum Owner’s Manual ILLUSTRATED PARTS LIST Nozzle Asse mbly Figure 1.
Part No 840245 20 Form No F060711D MV650SPH Self-Propelled Vacuum Owner’s Manual Nozzle Assembly Parts List ITE M N O . PA R T NUM B ER DE S CRI P TI O N M V 650S P H QTY .
Form No F060711D 21 Part No 840245 MV650SPH Self-Propelled Vacuum Owner’s Manual Drive /Rear Axle Assembly Figure 2.
Part No 840245 22 Form No F060711D MV650SPH Self-Propelled Vacuum Owner’s Manual Drive /Rear Axle Assembly Parts List ITE M N O. P ART NUM BER DE S CRI P T I ON M V 650S P H QTY .
Form No F060711D 23 Part No 840245 MV650SPH Self-Propelled Vacuum Owner’s Manual Engine Assembly Figure 3.
Part No 840245 24 Form No F060711D MV650SPH Self-Propelled Vacuum Owner’s Man u a l Engine Assembly Parts List ITE M NO. PAR T NUM B ER DE S CRI P T I ON M V 650S P H QTY .
Form No F060711D 25 Part No 840245 MV650SPH Self-Propelled Vacuum Owner’s Manual Hood Assembly Figure 4.
Part No 840245 26 Form No F060711D MV650SPH Self-Propelled Vacuum Owner’s Man u a l Hood Assembly ITE M NO. PAR T NUM BER DES CRI P T I ON MV 650SP H QTY.
An important point after buying a device Billy Goat MV600SPE (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Billy Goat MV600SPE yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Billy Goat MV600SPE - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Billy Goat MV600SPE you will learn all the available features of the product, as well as information on its operation. The information that you get Billy Goat MV600SPE will certainly help you make a decision on the purchase.
If you already are a holder of Billy Goat MV600SPE, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Billy Goat MV600SPE.
However, one of the most important roles played by the user manual is to help in solving problems with Billy Goat MV600SPE. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Billy Goat MV600SPE along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
