Instruction/ maintenance manual of the product ZPS1002 Zonet
Go to page of 11
.
1 Before yo u st art, you sho uld prep are the fo llowing items: One Windows-based PC with print server setu p CD One printer One printer cable One HUB Wired Net work with Print Se rver: Printer Print Server Computer Computer Computer HUB Hardware Inst al lation: 1.
2 3. Choose Setup Wizard to install the print server and configure the connected printer ..
3 4. Click Next , the wizard will automatically discover the print server . 5. From the Select A Print Server screen, select the print server that you want to configure and click Next .
4 6. On the Change Settings screen, sele ct No or Y es : Click No if you want the print server to keep using the default IP add ress a nd keep the default settings, and then click Nex t . IP address: 192.168.0.10 Subnet Mask: 255.255.255.0 Click Y es if you want change IP address to the print server , and then click Next .
5 8. Click Add New Printer to launch Windows A dd Printer Wizard ..
6 9. Click Next and select Local Printer , make sure the A utomatic all y detect and inst a ll my Plug and Play printer check bo x is NOT checked. Then click Next . 10. Make sure the Use the follo wing port radio-button is clicked and select LPT1: (Recommended Printer Port) from t he pull-down list.
7 11. Select Manufacturer and Printer from the lists of printer ’s driver . Then click Nex t . 12. If you a lready have th e printer ’s driver installed, you will b e a sked whether to keep it or to rep lace it. Click Next . Supply a name fo r the printer a nd choose whether you want to make it your default printe r .
8 13. Then, choose whether you want to share the print er with other network users, print a test page (please select No .), etc. Select the appropriate radio-button and click Next and Finish . 14. In the setup wizard, f inish the installation b y h ighlighting th e installed printer in the Select a Printer list and click Next -> Finish .
9 16. Right-click, s elect Properties -> Ports an d v erify that t h e print server ’s po rt appears. 17. Go to General ; click Print T est Page to verify the configuration.
10 18. Done. Note: If y ou w ish to install more print servers, st a rt setup wiz ard from your W indow s S tart menu: st ar t -> All Programs -> Network Print Server -> PSWzard and repeat the installation procedure. All contents are subject to change without prior notice.
An important point after buying a device Zonet ZPS1002 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zonet ZPS1002 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zonet ZPS1002 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zonet ZPS1002 you will learn all the available features of the product, as well as information on its operation. The information that you get Zonet ZPS1002 will certainly help you make a decision on the purchase.
If you already are a holder of Zonet ZPS1002, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zonet ZPS1002.
However, one of the most important roles played by the user manual is to help in solving problems with Zonet ZPS1002. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zonet ZPS1002 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
