Instruction/ maintenance manual of the product Cadet 325 Fast Roller Acti-V Zodiac
Go to page of 9
/ 9 E N G L I S H 1 CAUTION z CAREFULLY READ THIS MANUAL BEFORE OPERATING YOUR BOAT. z THIS OWNER’S MANUAL IS IN TWO VOLUMES THAT MUST BE KEPT TOGETHER. NOTICE: THE OWNER'S MANUAL IS IN TWO VOLUMES: - VOLUME 1 DEALS WITH OPERATING PRECAUTIONS AND SAFETY RECOMMENDATIONS THAT MUST BE OBSERVED.
/ 9 2 ASSEMBLY PROCEDURE We recommend that you follow the specific order of the assembly procedur e. Proceed step by step and refer to the corresponding pages. PROCEDURE PAGE SECTION 1. inventory the elements composing your boat, and learn how to recognise them 2 CHECK ON UNPA CKING I - V DESCRIPTION 2.
/ 9 E N G L I S H 3 BOAT ASSEMBLY CHOOSE A SMOOTH, CLEAN SURFACE. IF THE BUOYANCY TUBE WAS STORED AT A TEMPERATURE BELOW 0°C / 32°F, LEAVE IT AT 20°C / 68°F FOR 12 HOURS BEFORE UNFOLDING. INSTALLING THE REMOVABL E RECESSED STOWAGE BOX (INT’L SYSTEM ONLY).
/ 9 4 ASSEMBLY Choose a smooth and clean surface . IF THE BUOYANCY TUBE WAS STORED AT A TEMPERATURE BELOW 0°C / 32°F, LEAVE IT AT 20°C / 68°F FOR 12 HOURS BEFORE UNFOLDING. THE H2P INFLATABLE FLOOR: H2P INFLATABLE FLOOR DEFLATED Your boat is delivered with the inflatabl e floor and its keel already assembled.
/ 9 E N G L I S H 5 INFLATION SYSTEM THE HIGH PRESSURE FOOT-PUMP A B Position A The pump has maximum flow but low pressure: this position is used to give shape rapidly to all inflatable parts of the boat. Position B The flow is inferior to position A, but provides pressure that is superior, with the same effort.
/ 9 6 INFLATION Activate all valv es into inflation position . Fit the hose to the foot-pump. To inflate your boat properly, the bottom side of the foot-pump must rest on a flat ground .
/ 9 E N G L I S H 7 PRESSURE The correct pressure for the buoyancy tube and the AirLite keel is 240 mb / 3,48 PSI, and 800 mb / 11,3 PSI for the H2P inflatable floor. If your boat is not equipped with an ACCESS pressure indicator, we recommend that you purchase one from your Dealer.
/ 9 8 ASSEMBLY OF STANDARD EQUIPMENT TO ASSEMBLE AND INSTALL THE OARS: THE REMOVABLE SEAT Install the seat before the boat is totally inflated. Clic.
/ 9 E N G L I S H 9 DEFLATING / FOLDING THE BOAT We recommend that you leave the H2P floor in t he boat when folding. To clean perfectly the boat proceed as follow: - Deflate the boat and the floor; t hen inflate again the boat a little. - Wash off with clear water, and then raise the boat’s nose to evacuate water and sand or rubbish.
An important point after buying a device Zodiac Cadet 325 Fast Roller Acti-V (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zodiac Cadet 325 Fast Roller Acti-V yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zodiac Cadet 325 Fast Roller Acti-V - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zodiac Cadet 325 Fast Roller Acti-V you will learn all the available features of the product, as well as information on its operation. The information that you get Zodiac Cadet 325 Fast Roller Acti-V will certainly help you make a decision on the purchase.
If you already are a holder of Zodiac Cadet 325 Fast Roller Acti-V, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zodiac Cadet 325 Fast Roller Acti-V.
However, one of the most important roles played by the user manual is to help in solving problems with Zodiac Cadet 325 Fast Roller Acti-V. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zodiac Cadet 325 Fast Roller Acti-V along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
