Instruction/ maintenance manual of the product R2W-6500P Zippy
Go to page of 15
PRODUCTS MANUAL R2W SERIES High Density Redundant Power Supply For 2U Chassis Rev .:A1 P/N:702-10041.
I N D E X 1.1 Introduction page 2 1.2 Packing page 3 1.3 Model Designation page 3 1.4 Features page 4 1.5 Pre-Installation page 4 1.6 Drawing page 5 ~ 6 1.7 Specification page 7 ~ 9 1.8 Installation & T esting page 10 ~ 1 1 1.9 Hot-Swap Procedures page 1 1 ~ 12 1.
1.1 INTRODUCTION First of all, thank you for purchasing R2W Series – High-Density Redundant power supply for 2U chassis. The R2W is a 1+1, Hot-swappable/Hot-pluggable, High-Density Redundant power s.
1.2 P ACKING Y our R2W box package should consist of the following: (A) R2W *1 (B) Accessory pack (included 1 holding bracket for shipment)*1 (C) Products’ manual *1 1.3 MODEL DESIGNA TION Model number identification: R2W – 6ZZZP R --- Redundant (AC Input) 2W --- suit for 2U chassis (1U = 44.
1.4 FEA TURES R2W Series --- High-Density Redundant power supply with Active Power Factor c o r r e c t i o n 1+1, Hot swappable, Hot pluggabl e, AC Input for 2U chassis Easy fit into 2U , 400/460W +4.
.
.
INPUT CHARACTERISTICS: R2W-6400P VOLTAGE: 90 ~ 264 VAC FULL RANGE FREQUENCY : 47 ~ 63 Hz INPUT CURRENT: 8.0 / 4.0 A FOR 115 / 230 VAC INRUSH CURRENT: 60A / 80A MAX. FOR 115 / 230 VAC PER POWER MODULE OUTPUT CHARACTERISTICS: OUTPUT CURRENT REGULATION OUTPUT MIN.
INPUT CHARACTERISTICS: R2W-6460P VOLTAGE: 90 ~ 264 VAC FULL RANGE FREQUENCY : 47 ~ 63 Hz INPUT CURRENT: 8.0 / 4.0 A FOR 115 / 230 VAC INRUSH CURRENT: 60A / 80A MAX. FOR 115 / 230 VAC PER POWER MODULE OUTPUT CHARACTERISTICS: OUTPUT CURRENT REGULATION OUTPUT MIN.
INPUT CHARACTERISTICS: R2W-6500P VOLTAGE: 105 ~ 264 VAC FULL RANGE FREQUENCY : 47 ~ 63 Hz INPUT CURRENT: 8.0 / 4.0 A FOR 115 / 230 VAC INRUSH CURRENT: 60A / 80A MAX. FOR 115 / 230 VAC PER POWER MODULE OUTPUT CHARACTERISTICS: OUTPUT CURRENT REGULATION OUTPUT MIN.
1.8 INST ALLA TION & TESTING T urn of f (Remote off) the on/of f switch. Mount the power supply in the system chassis using the proper mounting tool, the mounting holes in the power supply should match those in the case.
If everything works out fine, then turn off (rem ote off) the power system. Now put back the cover of the case and tighten with the screws that you have retained earlier . Now you have completed the in stallation of the R2W redundant power supply system.
D) Replace a new Good power module, insert the power module into the power system to the end. E) Check the LED of the power module light Green. F) Check the LED indicating the total power system status. It should be from twinkle to Green. G) T ighten the screws of the power module to fix it.
TTL signal : S i n k c u r r e n t m a x . 5 m A S o u r c e c u r r e n t m a x . 5 0 u A Low Active --- Defective High --- Normal 1.11 TROUBLE SHOOTING If you have followed these directions correctly , there should be no problem occurred. Some comm on symptoms are: the system doesn’ t work, buzzer sounds, work for a very short period, etc.
The “RELIABILITY “ solution to E-application 新巨企業股份有限公司 ZIPPY TECHNOLOGY CORP . POWER DIVISION HEADQUAR TERS 10F , NO. 50, MIN CHYUAN RD., SHIN-TIEN CITY , T AIPEI HSIEN, T AIW AN, R.O.C. TEL: 886-2-29188512 F AX: 886-2-29134969 WEB SITE: http://www .
An important point after buying a device Zippy R2W-6500P (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zippy R2W-6500P yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zippy R2W-6500P - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zippy R2W-6500P you will learn all the available features of the product, as well as information on its operation. The information that you get Zippy R2W-6500P will certainly help you make a decision on the purchase.
If you already are a holder of Zippy R2W-6500P, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zippy R2W-6500P.
However, one of the most important roles played by the user manual is to help in solving problems with Zippy R2W-6500P. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zippy R2W-6500P along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
