Instruction/ maintenance manual of the product DL1800V Billy Goat
Go to page of 16
Part No 791098 Form No F070207A 1 DL Owner’s Manual BILLY GOAT DL TRUCK LOADER VACUUM Owner's Manual DL1800V and DL2500S Accessories INTAKE EXHAUST TRAILER Standard on DL units. [12"(305mm) x 10' (3.0m)] [10”(254m m) X 10’ ( 3.0m )] 10” HOSE P/N 791033 12” HOSE P/N 791034 EXHAUST HOSE KIT [8"(203mm) x 5' (1.
Part No 791098 Form No F070207A 2 DL Owner’s Manual ABOUT THIS MANUAL THANK YOU for purchasing a BILLY GOAT ® DL Vacuum . Your new machine has been carefully designed and manufactured to provide years of reliab le and productive service.
Part No 791098 Form No F070207A 3 DL Owner’s Manual SERIAL PLATE DATA Record the model number, seri al number, date of purchase, and where purchased. Purchase Date: Purchased From: Specifications DL1800V DL2500S BATTERY NOT INCLUDED: REQUIRES 12 V BATTERY, 40 AH, 240 CCA MIN.
Part No 791098 Form No F070207A 4 DL Owner’s Manual GENERAL SAFETY INSTRUCTIO NS and SYMBOLS The safety symbols shown belo w are used throughou t this manual. You should become familiar with them before assembling, operating, or servicing this equipm ent.
Part No 791098 Form No F070207A 5 DL Owner’s Manual DO NOT run this equipment indoors or in an y poorly ventilated area. Refueling outdoors is recommended. DO NOT refuel this equipment while the engine is running. Allow engi ne to cool for at least two minutes before refueling.
Part No 791098 Form No F070207A 6 DL Owner’s Manual SOUND SOUND LEVEL 93 dB(a) at Operator P osition Sound tests were condu cted in accordance with 200 0/14/EEC , and were performed on 6/18/07 under the conditions listed below. Sound power level listed is the highest value for any model covered in this manual.
Part No 791098 Form No F070207A 7 DL Owner’s Manual INSTRUCTION LABELS The labels shown below were installed on your BILLY GOAT ® DL Vacuum. If any labels are damaged or missing, replace them before operating this equipment.
Part No 791098 Form No F070207A 8 DL Owner’s Manual PACKING CHECKLIST Your Billy Goat is shipped from the factory in one cart on and is completely assembled exc ept for the exhaust elbow, nozzle, handle loop for nozzle, hose bo oms, hose bands , hose coupler, hose cl amps and related hardware.
Part No 791098 Form No F070207A 9 DL Owner’s Manual ASSEMBLY OPERATION 1. SECURELY ATTACH unit to the bed of a truck or to a trailer, so t hat the exhaust discharges into an enclosed container. NOTE: This unit must be securely mounted to the bed of a truck or to a trailer before oper ating.
Part No 791098 Form No F070207A 10 DL Owner’s Manual MOUNTING: Main unit GENERAL: Unit must be securely mounted to a trailer, truck bed, or other similar surface bef ore use. Do not use this unit in a freestanding position. Unit is not stable until it has be en secured in place.
Part No 791098 Form No F070207A 11 DL Owner’s Manual ADJUSTING HO SE BOOM Properly adjusting the boom will prevent most hose clogs from occurring and will maximize vacuum performance b y keeping the hose straight and per pendicular to the housing (see fig.
Part No 791098 Form No F070207A 12 DL Owner’s Manual MAINTENANCE P ERIODIC M AINTENANCE Periodic maintenance should be perfo rmed at the following intervals: Maintenance Operation Every use Every 5 hou rs (daily) Every 10 Hours Every 25 Hours Inspect for loose, worn or damaged parts.
Part No 791098 Form No F070207A 13 DL Owner’s Manual Troubleshooting When servicing engi ne refer to specific manufacturers engi ne o wner's manual. Engine warranty is covered by the specific engine manufacturer. If your engine requi res warran ty or other repair work c ontact your local servicing engine dealer.
Part No 791098 Form No F070207A 14 DL Owner’s Manual PARTS DRAWING DL.
Part No 791098 Form No F070207A 15 DL Owner’s Manual PARTS LIST IT E M D L2 5 PA RT D L1 8 PA RT NO. NO. NO. 1 LABEL WARNI NG EX PL OSIVE FUEL 468572 1 468572 1 2 3 LABEL OPEI WARNING 400424 3 400424 3 4 WASH ER TWISTED LO CK 7/16" 850132 3 850132 3 5 GR I P 1 1/ 4 ID X 9.
Part No 791098 Form No F070207A 16 DL Owner’s Manual MAINTENANCE RECORD Date Service Performed.
An important point after buying a device Billy Goat DL1800V (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Billy Goat DL1800V yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Billy Goat DL1800V - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Billy Goat DL1800V you will learn all the available features of the product, as well as information on its operation. The information that you get Billy Goat DL1800V will certainly help you make a decision on the purchase.
If you already are a holder of Billy Goat DL1800V, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Billy Goat DL1800V.
However, one of the most important roles played by the user manual is to help in solving problems with Billy Goat DL1800V. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Billy Goat DL1800V along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
