Instruction/ maintenance manual of the product G800BPU-1 Zenoah
Go to page of 8
OWNER’S MANUAL 848H6393A3 (009) September 2010 • Do not modify any parts of the engine. • This engine is designed to be used to Radio controlled products. • In case any modification by customer, ZENOAH shall not bear any responsibility from the damage caused by such modification.
• This manual describes the engine. For its mounting and control, see the instruction manual for a radio controlled airplane. • This engine is designed for use on the radio controlled airplane. If it is used for any other purpose, we cannot be responsible for its reliability or safety.
[ NOTE ] 1. Be sure to use a gasoline-resistant fuel piping. (Do not use any silicon rubber tube). 2. Never use any alcohol fuel or alcohol added fuel, or the rubber part in the carburetor will be damaged. 1. Avoid starting engine by hand flipping propeller as it may cause injury.
4 counterclockwise decreases the idling R.P.M Low Speed Needle: This is the fuel adjust screw (not the air screw). Turning this needle clockwise makes the mixture gas leaner and turning it counterclockwise makes it richer. High Speed Needle: Turning this needle clockwise makes the mixture gas leaner and turning it counterclockwise richer.
5 2. Put the stopper (P/N.2670-96220) into a sparkplug hole (Fig.1) of the cylinder( ✽ ) which is located closer to the rotor than other cylinder when viewed from intake manifold side (Fig.2). 3. Turn the rotor counterclockwise until piston touches the stopper.
6 10. Specifications 11. Parts List G800BPU, G800BPU-1 Model ..............................................G800BPU · G800BPU-1 Type ................................................ Air cooled two stroke cycle opposed cylinder type gasoline engine Displacement .
7 1 T2080-12110 Cylinder 2 2 T2080-14110 Manifold 1 3 2850-14123 Gasket, inlet 2 4 3310-72150 Bolt 4 5 2898-81000 Carburetor assy, WJ-64 1 6 3304-81441 • Ring 1 7 1148-81390 • Ring 1 8 2898-81120 .
12. Warranty WARRANTY TERMS 1) Scope of Application This engine manufactured by Husqvarna Zenoah Co., Ltd. (herein after “Zenoah”). And sold to the user directly or through distributor/manufacturer, shall entitle to be covered by this warranty. 2) Limits of Warranty Zenoah warrants that; 1.
An important point after buying a device Zenoah G800BPU-1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zenoah G800BPU-1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zenoah G800BPU-1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zenoah G800BPU-1 you will learn all the available features of the product, as well as information on its operation. The information that you get Zenoah G800BPU-1 will certainly help you make a decision on the purchase.
If you already are a holder of Zenoah G800BPU-1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zenoah G800BPU-1.
However, one of the most important roles played by the user manual is to help in solving problems with Zenoah G800BPU-1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zenoah G800BPU-1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
