Instruction/ maintenance manual of the product G380PU-1 Zenoah
Go to page of 8
OWNER’S MANUAL 2609-93112 (811) November 2008 • Do not modify any parts of the engine. • This engine is designed to be used to Radio controlled products. • In case any modification by customer, ZENOAH shall not bear any responsibility from the damage caused by such modification.
• This engine is designed for the model aircraft use. ZENOAH assumes no responsibility for those engines that are modified or used for any other applications. • This Manual describes the engine part only. For its mounting to the aircraft and its control, see instructions described in the manual of the aircraft.
4. When engine first fires, open the choke and turn the propeller again in the same manner. 5. When the engine is started,warm it up for 2 to 3 minutes at low speed. Stopping Engine Ground the black wire from the source coil to the engine, and the engine will stop.
4 • Check if screws and bolts are firmly tightened. • Check if there is any fuel leakage. • Check if there is any damage (crack or deformation). • Check if the fuel line is clogged. • Check if the spark plug and the muffler are contaminated.
5 6. Specifications Model .......................................................G380PU · G380PU-1 Type .........................................................Single cylinder gasoline engine, 2-stroke air cooled Displacement .......................
6 7. Parts List G380PU, G380PU-1.
46 2630-81120 • Cover 1 47 3310-81130 • Screw 1 48 3304-81140 • Gasket 1 49 1172-81150 • Diaphragm 1 50 3356-81310 • Valve 1 51 2850-81290 • Gasket 1 52 3310-81260 • Diaphragm 1 53 3310-.
● Scope of Application This warranty applies only to the engines and parts manufactured by ZENOAH and sold directly or through distributors. ● Limit of Warranty This warranty shall apply only to trouble resulting from material defects and inferior assemblies that ZENOAH acknowledges.
An important point after buying a device Zenoah G380PU-1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zenoah G380PU-1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zenoah G380PU-1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zenoah G380PU-1 you will learn all the available features of the product, as well as information on its operation. The information that you get Zenoah G380PU-1 will certainly help you make a decision on the purchase.
If you already are a holder of Zenoah G380PU-1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zenoah G380PU-1.
However, one of the most important roles played by the user manual is to help in solving problems with Zenoah G380PU-1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zenoah G380PU-1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
