Instruction/ maintenance manual of the product GX420 Zebra Technologies
Go to page of 4
The G- Series printer ’s serial port is of a cross- over 1. null-modem configuration, which is the same pin-out arrangement as on the ZPL-based 28-series printers. F or serial port users of EPL-based 28-series printers, an appropriate serial cable or adaptor can be sourced.
Migration guide Zebra G - Series printers Firmware One of the features of the G- Series printer is the dual 1. residency of its command languages: the coexistence of both EPL™ and ZPL ® command sets and the printer ’s ability to process them are very different from the individual command-specific 28- series printers.
The default media action of the G- Series printers 1. resembles that of an EPL-based 28-series printer: the printer will not feed automatically at power -on, only following a lid closure. If you are changing between two different styles of media, you should carry out a manual calibration.
Zebra T echnologies – EMEA Headquarters & Sales Office E-mail: mseurope@zebra.com Other EMEA Locations Europe: France, Germany , Italy , the Netherlands, Poland, Spain, Sweden Middle East & Africa: Dubai, India, South Africa ©2008 ZIH Corp.
An important point after buying a device Zebra Technologies GX420 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zebra Technologies GX420 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zebra Technologies GX420 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zebra Technologies GX420 you will learn all the available features of the product, as well as information on its operation. The information that you get Zebra Technologies GX420 will certainly help you make a decision on the purchase.
If you already are a holder of Zebra Technologies GX420, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zebra Technologies GX420.
However, one of the most important roles played by the user manual is to help in solving problems with Zebra Technologies GX420. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zebra Technologies GX420 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
